4 # NOTE: This top-level Makefile must not
5 # use GNU-make extensions. The lower ones can.
10 $(if $(wildcard Make.inc),,$(error Missing 'Make.inc' Run './configure [options]' and retry))
14 MFLAGS += --no-print-directory
16 # The version of GNU Make is too old, don't use it (.FEATURES variable was
19 $(error The build system requires GNU Make 3.81 or later.)
22 export DESTDIR := $(R)
24 # And over-ride all of the other magic.
25 include scripts/boiler.mk
28 # To work around OpenSSL issues with travis.
32 @echo 'security {' >> $@
33 @echo ' allow_vulnerable_openssl = yes' >> $@
35 @echo '$$INCLUDE radiusd.conf' >> $@
38 # Run "radiusd -C", looking for errors.
40 # Only redirect STDOUT, which should contain details of why the test failed.
41 # Don't molest STDERR as this may be used to receive output from a debugger.
42 $(BUILD_DIR)/tests/radiusd-c: raddb/test.conf ${BUILD_DIR}/bin/radiusd | build.raddb
43 @$(MAKE) -C raddb/certs
44 @printf "radiusd -C... "
45 @if ! ./build/make/jlibtool --mode=execute ./build/bin/radiusd -XCMd ./raddb -D ./share -n test > $(BUILD_DIR)/tests/radiusd.config.log; then \
46 rm -f raddb/test.conf; \
47 cat $(BUILD_DIR)/tests/radiusd.config.log; \
51 @rm -f raddb/test.conf
55 test: ${BUILD_DIR}/bin/radiusd ${BUILD_DIR}/bin/radclient tests.unit tests.keywords tests.auth $(BUILD_DIR)/tests/radiusd-c | build.raddb
56 @$(MAKE) -C src/tests tests
58 # Tests specifically for Travis. We do a LOT more than just
60 ifneq "$(findstring travis,${prefix})" ""
61 travis-test: raddb/test.conf test
62 @./build/make/jlibtool --mode=execute ./build/bin/radiusd -xxxv -n test
63 @rm -f raddb/test.conf
65 @perl -p -i -e 's/allow_vulnerable_openssl = no/allow_vulnerable_openssl = yes/' ${raddbdir}/radiusd.conf
66 @${sbindir}/radiusd -XC
71 # The $(R) is a magic variable not defined anywhere in this source.
72 # It's purpose is to allow an admin to create an installation 'tar'
73 # file *without* actually installing it. e.g.:
75 # $ R=/home/root/tmp make install
77 # $ tar -cf ~/freeradius-package.tar *
79 # The 'tar' file can then be un-tar'd on any similar machine. It's a
80 # cheap way of creating packages, without using a package manager.
81 # Many of the platform-specific packaging tools use the $(R) variable
82 # when creating their packages.
84 # For compatibility with typical GNU packages (e.g. as seen in libltdl),
85 # we make sure DESTDIR is defined.
87 export DESTDIR := $(R)
89 .PHONY: install.bindir
91 @[ -d $(R)$(bindir) ] || $(INSTALL) -d -m 755 $(R)$(bindir)
93 .PHONY: install.sbindir
95 @[ -d $(R)$(sbindir) ] || $(INSTALL) -d -m 755 $(R)$(sbindir)
98 install.dirs: install.bindir install.sbindir
99 @$(INSTALL) -d -m 755 $(R)$(mandir)
100 @$(INSTALL) -d -m 755 $(R)$(RUNDIR)
101 @$(INSTALL) -d -m 700 $(R)$(logdir)
102 @$(INSTALL) -d -m 700 $(R)$(radacctdir)
103 @$(INSTALL) -d -m 755 $(R)$(datadir)
104 @$(INSTALL) -d -m 755 $(R)$(dictdir)
106 DICTIONARIES := $(wildcard share/dictionary*)
107 install.share: $(addprefix $(R)$(dictdir)/,$(notdir $(DICTIONARIES)))
109 $(R)$(dictdir)/%: share/%
110 @echo INSTALL $(notdir $<)
111 @$(INSTALL) -m 644 $< $@
113 MANFILES := $(wildcard man/man*/*.?)
114 install.man: $(subst man/,$(R)$(mandir)/,$(MANFILES))
116 $(R)$(mandir)/%: man/%
117 @echo INSTALL $(notdir $<)
118 @$(INSTALL) -m 644 $< $@
120 install: install.dirs install.share install.man
124 .PHONY: install-chown
126 chown -R $(RADMIN) $(R)$(raddbdir)
127 chgrp -R $(RGROUP) $(R)$(raddbdir)
128 chmod u=rwx,g=rx,o= `find $(R)$(raddbdir) -type d -print`
129 chmod u=rw,g=r,o= `find $(R)$(raddbdir) -type f -print`
130 chown -R $(RADMIN) $(R)$(logdir)
131 chgrp -R $(RGROUP) $(R)$(logdir)
132 find $(R)$(logdir) -type d -exec chmod u=rwx,g=rwx,o= {} \;
133 find $(R)$(logdir) -type d -exec chmod g+s {} \;
134 find $(R)$(logdir) -type f -exec chmod u=rw,g=rw,o= {} \;
135 chown -R $(RADMIN) $(R)$(RUNDIR)
136 chgrp -R $(RGROUP) $(R)$(RUNDIR)
137 find $(R)$(RUNDIR) -type d -exec chmod u=rwx,g=rwx,o= {} \;
138 find $(R)$(RUNDIR) -type d -exec chmod g+s {} \;
139 find $(R)$(RUNDIR) -type f -exec chmod u=rw,g=rw,o= {} \;
144 @-find src/modules -regex .\*/config[.][^.]*\$$ -delete
145 @-find src/modules -name autom4te.cache -exec rm -rf '{}' \;
146 @rm -rf config.cache config.log config.status libtool \
147 src/include/radpaths.h src/include/stamp-h \
148 libltdl/config.log libltdl/config.status \
149 libltdl/libtool autom4te.cache build
150 @-find . ! -name configure.ac -name \*.in -print | \
152 while read file; do rm -f $$file; done
154 ######################################################################
156 # Automatic remaking rules suggested by info:autoconf#Automatic_Remaking
158 ######################################################################
160 # Do these checks ONLY if we're re-building the "configure"
161 # scripts, and ONLY the "configure" scripts. If we leave
162 # these rules enabled by default, then they're run too often.
164 ifeq "$(MAKECMDGOALS)" "reconfig"
166 CONFIGURE_AC_FILES := $(shell find . -name configure.ac -print)
167 CONFIGURE_FILES := $(patsubst %.ac,%,$(CONFIGURE_AC_FILES))
170 # The GNU tools make autoconf=="missing autoconf", which then returns
171 # 0, even when autoconf doesn't exist. This check is to ensure that
172 # we run AUTOCONF only when it exists.
174 AUTOCONF_EXISTS := $(shell autoconf --version 2>/dev/null)
176 ifeq "$(AUTOCONF_EXISTS)" ""
177 $(error You need to install autoconf to re-build the "configure" scripts)
180 # Configure files depend on "in" files, and on the top-level macro files
181 # If there are headers, run auto-header, too.
182 src/%configure: src/%configure.ac acinclude.m4 aclocal.m4 $(wildcard $(dir $@)m4/*m4) | src/freeradius-devel
183 @echo AUTOCONF $(dir $@)
184 cd $(dir $@) && $(AUTOCONF) -I $(top_builddir) -I $(top_builddir)/m4 -I $(top_builddir)/$(dir $@)m4
185 @if grep AC_CONFIG_HEADERS $@ >/dev/null; then\
187 cd $(dir $@) && $(AUTOHEADER); \
190 # "%configure" doesn't match "configure"
191 configure: configure.ac $(wildcard ac*.m4) $(wildcard m4/*.m4)
195 src/include/autoconf.h.in: configure.ac
199 reconfig: $(CONFIGURE_FILES) src/include/autoconf.h.in
201 config.status: configure
202 ./config.status --recheck
204 # target is "configure"
207 # If we've already run configure, then add rules which cause the
208 # module-specific "all.mk" files to depend on the mk.in files, and on
209 # the configure script.
211 ifneq "$(wildcard config.log)" ""
212 CONFIGURE_ARGS := $(shell head -10 config.log | grep '^ \$$' | sed 's/^....//;s:.*configure ::')
214 src/%all.mk: src/%all.mk.in src/%configure
215 @echo CONFIGURE $(dir $@)
216 @rm -f ./config.cache $(dir $<)/config.cache
217 @cd $(dir $<) && ./configure $(CONFIGURE_ARGS)
220 .PHONY: check-includes
222 scripts/min-includes.pl `find . -name "*.c" -print`
226 etags `find src -type f -name '*.[ch]' -print` > $@
229 # Make test certificates.
233 @$(MAKE) -C raddb/certs
235 ######################################################################
239 # Note that "Make.inc" has to be updated with the release number
240 # BEFORE running this command!
242 ######################################################################
243 BRANCH = $(shell git rev-parse --abbrev-ref HEAD)
245 freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz: .git
246 git archive --format=tar --prefix=freeradius-server-$(RADIUSD_VERSION_STRING)/ $(BRANCH) | gzip > $@
248 freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz.sig: freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz
249 gpg --default-key aland@freeradius.org -b $<
251 freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2: .git
252 git archive --format=tar --prefix=freeradius-server-$(RADIUSD_VERSION_STRING)/ $(BRANCH) | bzip2 > $@
254 freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2.sig: freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2
255 gpg --default-key aland@freeradius.org -b $<
259 dist-check: redhat/freeradius.spec suse/freeradius.spec debian/changelog
260 @if [ `grep ^Version: redhat/freeradius.spec | sed 's/.*://;s/ //'` != "$(RADIUSD_VERSION_STRING)" ]; then \
261 cat redhat/freeradius.spec | sed 's/^Version: .*/Version: $(RADIUSD_VERSION_STRING)/' > redhat/.foo; \
262 mv redhat/.foo redhat/freeradius.spec; \
263 echo redhat/freeradius.spec 'Version' needs to be updated; \
266 @if [ `grep ^Version: suse/freeradius.spec | sed 's/.*://;s/ //'` != "$(RADIUSD_VERSION_STRING)" ]; then \
267 cat suse/freeradius.spec | sed 's/^Version: .*/Version: $(RADIUSD_VERSION_STRING)/' > suse/.foo; \
268 mv suse/.foo suse/freeradius.spec; \
269 echo suse/freeradius.spec 'Version' needs to be updated; \
272 @if [ `head -n 1 debian/changelog | sed 's/.*(//;s/-0).*//;s/-1).*//;s/\+.*//'` != "$(RADIUSD_VERSION_STRING)" ]; then \
273 echo debian/changelog needs to be updated; \
277 dist: dist-check freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2
279 dist-sign: freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz.sig freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2.sig
281 dist-publish: freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz.sig freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz.sig freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2 freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz.sig freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2.sig
282 scp $^ freeradius.org@ftp.freeradius.org:public_ftp
285 # Note that we do NOT do the tagging here! We just print out what
288 dist-tag: freeradius-server-$(RADIUSD_VERSION_STRING).tar.gz freeradius-server-$(RADIUSD_VERSION_STRING).tar.bz2
289 @echo "git tag release_`echo $(RADIUSD_VERSION_STRING) | tr .- __`"
292 # Build a debian package
296 fakeroot dpkg-buildpackage -b -uc
301 @(make clean all 2>&1) | egrep -v '^/|deprecated|^In file included|: In function| from |^HEADER|^CC|^LINK' > warnings.txt
305 # Ensure we're using tabs in the configuration files,
306 # and remove trailing whitespace in source files.
310 @for x in $$(git ls-files raddb/ src/); do unexpand $$x > $$x.bak; cp $$x.bak $$x; rm -f $$x.bak;done
311 @perl -p -i -e 'trim' $$(git ls-files src/)