3 # Guess values for system-dependent variables and create Makefiles.
4 # Generated automatically using autoconf version 2.13
5 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
7 # This configure script is free software; the Free Software Foundation
8 # gives unlimited permission to copy, distribute and modify it.
12 ac_default_prefix=/usr/local
13 # Any additions from configure.in:
15 --disable-ltdl-install do not install libltdl"
17 --with-ltdl-lib=DIR libltdl library is in DIR [default=${top_builddir}/libltdl/]"
19 --with-ltdl-include=DIR libltdl include files are in DIR [default=$top_srcdir/libltdl/]"
21 --with-system-libtool try to use libtool installed in your system [default=use our own]"
23 --enable-shared[=PKGS] build shared libraries [default=yes]"
25 --enable-static[=PKGS] build static libraries [default=yes]"
27 --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
29 --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
31 # Find the correct PATH separator. Usually this is `:', but
32 # DJGPP uses `;' like DOS.
33 if test "X${PATH_SEPARATOR+set}" != Xset; then
34 UNAME=${UNAME-`uname 2>/dev/null`}
36 *-DOS) lt_cv_sys_path_separator=';' ;;
37 *) lt_cv_sys_path_separator=':' ;;
39 PATH_SEPARATOR=$lt_cv_sys_path_separator
43 # Check that we are running under the correct shell.
44 SHELL=${CONFIG_SHELL-/bin/sh}
48 # Remove one level of quotation (which was required for Make).
49 ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
54 if test "X$1" = X--no-reexec; then
55 # Discard the --no-reexec flag, and continue.
57 elif test "X$1" = X--fallback-echo; then
58 # Avoid inline document here, it may be left over
60 elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
61 # Yippee, $echo works!
64 # Restart under the correct shell.
65 exec $SHELL "$0" --no-reexec ${1+"$@"}
68 if test "X$1" = X--fallback-echo; then
69 # used as fallback echo
77 # The HP-UX ksh and POSIX shell print the target directory to stdout
79 if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
81 if test -z "$ECHO"; then
82 if test "X${echo_test_string+set}" != Xset; then
83 # find a string as large as possible, as long as the shell can cope with it
84 for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
85 # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
86 if (echo_test_string="`eval $cmd`") 2>/dev/null &&
87 echo_test_string="`eval $cmd`" &&
88 (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
95 if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
96 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
97 test "X$echo_testing_string" = "X$echo_test_string"; then
100 # The Solaris, AIX, and Digital Unix default echo programs unquote
101 # backslashes. This makes it impossible to quote backslashes using
102 # echo "$something" | sed 's/\\/\\\\/g'
104 # So, first we look for a working echo in the user's PATH.
106 IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
107 for dir in $PATH /usr/ucb; do
108 if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
109 test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
110 echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
111 test "X$echo_testing_string" = "X$echo_test_string"; then
118 if test "X$echo" = Xecho; then
119 # We didn't find a better echo, so look for alternatives.
120 if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
121 echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
122 test "X$echo_testing_string" = "X$echo_test_string"; then
123 # This shell has a builtin print -r that does the trick.
125 elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
126 test "X$CONFIG_SHELL" != X/bin/ksh; then
127 # If we have ksh, try running configure again with it.
128 ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
129 export ORIGINAL_CONFIG_SHELL
130 CONFIG_SHELL=/bin/ksh
132 exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
136 if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
137 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
138 test "X$echo_testing_string" = "X$echo_test_string"; then
141 elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
142 test "X$echo_testing_string" = 'X\t' &&
143 echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
144 test "X$echo_testing_string" = "X$echo_test_string"; then
145 CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
147 SHELL="$CONFIG_SHELL"
149 echo="$CONFIG_SHELL $0 --fallback-echo"
150 elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
151 test "X$echo_testing_string" = 'X\t' &&
152 echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
153 test "X$echo_testing_string" = "X$echo_test_string"; then
154 echo="$CONFIG_SHELL $0 --fallback-echo"
156 # maybe with a smaller string...
159 for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
160 if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
167 if test "$prev" != 'sed 50q "$0"'; then
168 echo_test_string=`eval $prev`
169 export echo_test_string
170 exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
172 # Oops. We lost completely, so just stick with echo.
181 # Copy echo and quote the copy suitably for passing to libtool from
182 # the Makefile, instead of quoting the original, which is used later.
184 if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
185 ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
190 --disable-libtool-lock avoid locking (might break parallel builds)"
192 --with-pic try to use only PIC/non-PIC objects [default=use both]"
194 --enable-strict-dependencies Fail configure on lack of module dependancy."
196 --with-logdir=DIR Directory for logfiles [LOCALSTATEDIR/log/radius] "
198 --with-radacctdir=PATH Directory for detail files [LOGDIR/radacct] "
200 --with-raddbdir=DIR Directory for config files [SYSCONFDIR/raddb] "
202 --with-ascend-binary Include support for Ascend binary filter attributes (default=yes)"
204 --with-threads Use threads, if available. (default=yes) "
206 --with-snmp Compile in SNMP support. (default=yes)"
208 --with-large-files Compile in large (2G+) file support. (default=no)"
210 --with-static-modules=QUOTED-MODULE-LIST"
212 --enable-developer Enables features of interest to developers."
214 --with-experimental-modules Use experimental and unstable modules. (default=no) "
216 --with-rlm-FOO-lib-dir=DIR Directory to look for library files used by module FOO"
218 --with-rlm-FOO-include-dir=DIR Directory to look for include files used by module FOO"
220 # Initialize some variables set by options.
221 # The variables have the same names as the options, with
222 # dashes changed to underlines.
224 cache_file=./config.cache
233 program_transform_name=s,x,x,
241 bindir='${exec_prefix}/bin'
242 sbindir='${exec_prefix}/sbin'
243 libexecdir='${exec_prefix}/libexec'
244 datadir='${prefix}/share'
245 sysconfdir='${prefix}/etc'
246 sharedstatedir='${prefix}/com'
247 localstatedir='${prefix}/var'
248 libdir='${exec_prefix}/lib'
249 includedir='${prefix}/include'
250 oldincludedir='/usr/include'
251 infodir='${prefix}/info'
252 mandir='${prefix}/man'
254 # Initialize some other variables.
257 SHELL=${CONFIG_SHELL-/bin/sh}
258 # Maximum number of lines to put in a shell here document.
265 # If the previous option needs an argument, assign it.
266 if test -n "$ac_prev"; then
267 eval "$ac_prev=\$ac_option"
273 -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
277 # Accept the important Cygnus configure options, so we can diagnose typos.
281 -bindir | --bindir | --bindi | --bind | --bin | --bi)
283 -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
284 bindir="$ac_optarg" ;;
286 -build | --build | --buil | --bui | --bu)
288 -build=* | --build=* | --buil=* | --bui=* | --bu=*)
289 build="$ac_optarg" ;;
291 -cache-file | --cache-file | --cache-fil | --cache-fi \
292 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
293 ac_prev=cache_file ;;
294 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
295 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
296 cache_file="$ac_optarg" ;;
298 -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
300 -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
302 datadir="$ac_optarg" ;;
304 -disable-* | --disable-*)
305 ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
306 # Reject names that are not valid shell variable names.
307 if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
308 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
310 ac_feature=`echo $ac_feature| sed 's/-/_/g'`
311 eval "enable_${ac_feature}=no" ;;
313 -enable-* | --enable-*)
314 ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
315 # Reject names that are not valid shell variable names.
316 if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
317 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
319 ac_feature=`echo $ac_feature| sed 's/-/_/g'`
324 eval "enable_${ac_feature}='$ac_optarg'" ;;
326 -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
327 | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
328 | --exec | --exe | --ex)
329 ac_prev=exec_prefix ;;
330 -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
331 | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
332 | --exec=* | --exe=* | --ex=*)
333 exec_prefix="$ac_optarg" ;;
335 -gas | --gas | --ga | --g)
336 # Obsolete; use --with-gas.
339 -help | --help | --hel | --he)
340 # Omit some internal or obsolete options to make the list less imposing.
341 # This message is too long to be a string in the A/UX 3.1 sh.
343 Usage: configure [options] [host]
344 Options: [defaults in brackets after descriptions]
346 --cache-file=FILE cache test results in FILE
347 --help print this message
348 --no-create do not create output files
349 --quiet, --silent do not print \`checking...' messages
350 --version print the version of autoconf that created configure
351 Directory and file names:
352 --prefix=PREFIX install architecture-independent files in PREFIX
354 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
356 --bindir=DIR user executables in DIR [EPREFIX/bin]
357 --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
358 --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
359 --datadir=DIR read-only architecture-independent data in DIR
361 --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
362 --sharedstatedir=DIR modifiable architecture-independent data in DIR
364 --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
365 --libdir=DIR object code libraries in DIR [EPREFIX/lib]
366 --includedir=DIR C header files in DIR [PREFIX/include]
367 --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
368 --infodir=DIR info documentation in DIR [PREFIX/info]
369 --mandir=DIR man documentation in DIR [PREFIX/man]
370 --srcdir=DIR find the sources in DIR [configure dir or ..]
371 --program-prefix=PREFIX prepend PREFIX to installed program names
372 --program-suffix=SUFFIX append SUFFIX to installed program names
373 --program-transform-name=PROGRAM
374 run sed PROGRAM on installed program names
378 --build=BUILD configure for building on BUILD [BUILD=HOST]
379 --host=HOST configure for HOST [guessed]
380 --target=TARGET configure for TARGET [TARGET=HOST]
381 Features and packages:
382 --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
383 --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
384 --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
385 --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
386 --x-includes=DIR X include files are in DIR
387 --x-libraries=DIR X library files are in DIR
389 if test -n "$ac_help"; then
390 echo "--enable and --with options recognized:$ac_help"
394 -host | --host | --hos | --ho)
396 -host=* | --host=* | --hos=* | --ho=*)
399 -includedir | --includedir | --includedi | --included | --include \
400 | --includ | --inclu | --incl | --inc)
401 ac_prev=includedir ;;
402 -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
403 | --includ=* | --inclu=* | --incl=* | --inc=*)
404 includedir="$ac_optarg" ;;
406 -infodir | --infodir | --infodi | --infod | --info | --inf)
408 -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
409 infodir="$ac_optarg" ;;
411 -libdir | --libdir | --libdi | --libd)
413 -libdir=* | --libdir=* | --libdi=* | --libd=*)
414 libdir="$ac_optarg" ;;
416 -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
417 | --libexe | --libex | --libe)
418 ac_prev=libexecdir ;;
419 -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
420 | --libexe=* | --libex=* | --libe=*)
421 libexecdir="$ac_optarg" ;;
423 -localstatedir | --localstatedir | --localstatedi | --localstated \
424 | --localstate | --localstat | --localsta | --localst \
425 | --locals | --local | --loca | --loc | --lo)
426 ac_prev=localstatedir ;;
427 -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
428 | --localstate=* | --localstat=* | --localsta=* | --localst=* \
429 | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
430 localstatedir="$ac_optarg" ;;
432 -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
434 -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
435 mandir="$ac_optarg" ;;
438 # Obsolete; use --without-fp.
441 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
445 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
446 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
449 -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
450 | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
451 | --oldin | --oldi | --old | --ol | --o)
452 ac_prev=oldincludedir ;;
453 -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
454 | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
455 | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
456 oldincludedir="$ac_optarg" ;;
458 -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
460 -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
461 prefix="$ac_optarg" ;;
463 -program-prefix | --program-prefix | --program-prefi | --program-pref \
464 | --program-pre | --program-pr | --program-p)
465 ac_prev=program_prefix ;;
466 -program-prefix=* | --program-prefix=* | --program-prefi=* \
467 | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
468 program_prefix="$ac_optarg" ;;
470 -program-suffix | --program-suffix | --program-suffi | --program-suff \
471 | --program-suf | --program-su | --program-s)
472 ac_prev=program_suffix ;;
473 -program-suffix=* | --program-suffix=* | --program-suffi=* \
474 | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
475 program_suffix="$ac_optarg" ;;
477 -program-transform-name | --program-transform-name \
478 | --program-transform-nam | --program-transform-na \
479 | --program-transform-n | --program-transform- \
480 | --program-transform | --program-transfor \
481 | --program-transfo | --program-transf \
482 | --program-trans | --program-tran \
483 | --progr-tra | --program-tr | --program-t)
484 ac_prev=program_transform_name ;;
485 -program-transform-name=* | --program-transform-name=* \
486 | --program-transform-nam=* | --program-transform-na=* \
487 | --program-transform-n=* | --program-transform-=* \
488 | --program-transform=* | --program-transfor=* \
489 | --program-transfo=* | --program-transf=* \
490 | --program-trans=* | --program-tran=* \
491 | --progr-tra=* | --program-tr=* | --program-t=*)
492 program_transform_name="$ac_optarg" ;;
494 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
495 | -silent | --silent | --silen | --sile | --sil)
498 -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
500 -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
502 sbindir="$ac_optarg" ;;
504 -sharedstatedir | --sharedstatedir | --sharedstatedi \
505 | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
506 | --sharedst | --shareds | --shared | --share | --shar \
508 ac_prev=sharedstatedir ;;
509 -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
510 | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
511 | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
513 sharedstatedir="$ac_optarg" ;;
515 -site | --site | --sit)
517 -site=* | --site=* | --sit=*)
520 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
522 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
523 srcdir="$ac_optarg" ;;
525 -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
526 | --syscon | --sysco | --sysc | --sys | --sy)
527 ac_prev=sysconfdir ;;
528 -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
529 | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
530 sysconfdir="$ac_optarg" ;;
532 -target | --target | --targe | --targ | --tar | --ta | --t)
534 -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
535 target="$ac_optarg" ;;
537 -v | -verbose | --verbose | --verbos | --verbo | --verb)
540 -version | --version | --versio | --versi | --vers)
541 echo "configure generated by autoconf version 2.13"
545 ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
546 # Reject names that are not valid shell variable names.
547 if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
548 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
550 ac_package=`echo $ac_package| sed 's/-/_/g'`
555 eval "with_${ac_package}='$ac_optarg'" ;;
557 -without-* | --without-*)
558 ac_package=`echo $ac_option|sed -e 's/-*without-//'`
559 # Reject names that are not valid shell variable names.
560 if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
561 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
563 ac_package=`echo $ac_package| sed 's/-/_/g'`
564 eval "with_${ac_package}=no" ;;
567 # Obsolete; use --with-x.
570 -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
571 | --x-incl | --x-inc | --x-in | --x-i)
572 ac_prev=x_includes ;;
573 -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
574 | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
575 x_includes="$ac_optarg" ;;
577 -x-libraries | --x-libraries | --x-librarie | --x-librari \
578 | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
579 ac_prev=x_libraries ;;
580 -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
581 | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
582 x_libraries="$ac_optarg" ;;
584 -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
588 if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
589 echo "configure: warning: $ac_option: invalid host type" 1>&2
591 if test "x$nonopt" != xNONE; then
592 { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
600 if test -n "$ac_prev"; then
601 { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
604 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
606 # File descriptor usage:
609 # 2 errors and warnings
610 # 3 some systems may open it to /dev/tty
611 # 4 used on the Kubota Titan
612 # 6 checking for... messages and results
613 # 5 compiler messages saved in config.log
614 if test "$silent" = yes; then
622 This file contains any messages produced by compilers while
623 running configure, to aid debugging if configure makes a mistake.
626 # Strip out --no-create and --no-recursion so they do not pile up.
627 # Also quote any args containing shell metacharacters.
632 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
633 | --no-cr | --no-c) ;;
634 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
635 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
636 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
637 ac_configure_args="$ac_configure_args '$ac_arg'" ;;
638 *) ac_configure_args="$ac_configure_args $ac_arg" ;;
643 # Only set these to C if already set. These must not be set unconditionally
644 # because not all systems understand e.g. LANG=C (notably SCO).
645 # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
646 # Non-C LC_CTYPE values break the ctype check.
647 if test "${LANG+set}" = set; then LANG=C; export LANG; fi
648 if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
649 if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
650 if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
652 # confdefs.h avoids OS command line length limits that DEFS can exceed.
653 rm -rf conftest* confdefs.h
654 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
657 # A filename unique to this package, relative to the directory that
658 # configure is in, which we can look for to find out if srcdir is correct.
659 ac_unique_file=src/main/radiusd.c
661 # Find the source files, if location was not specified.
662 if test -z "$srcdir"; then
663 ac_srcdir_defaulted=yes
664 # Try the directory containing this script, then its parent.
666 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
667 test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
669 if test ! -r $srcdir/$ac_unique_file; then
673 ac_srcdir_defaulted=no
675 if test ! -r $srcdir/$ac_unique_file; then
676 if test "$ac_srcdir_defaulted" = yes; then
677 { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
679 { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
682 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
684 # Prefer explicitly selected file to automatically selected ones.
685 if test -z "$CONFIG_SITE"; then
686 if test "x$prefix" != xNONE; then
687 CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
689 CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
692 for ac_site_file in $CONFIG_SITE; do
693 if test -r "$ac_site_file"; then
694 echo "loading site script $ac_site_file"
699 if test -r "$cache_file"; then
700 echo "loading cache $cache_file"
703 echo "creating cache $cache_file"
708 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
709 ac_cpp='$CPP $CPPFLAGS'
710 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
711 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
712 cross_compiling=$ac_cv_prog_cc_cross
716 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
717 # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
718 if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
725 ac_n= ac_c='\c' ac_t=
730 # From configure.in Revision: 1.177.2.9
731 RADIUSD_MAJOR_VERSION=0
732 RADIUSD_MINOR_VERSION=9.1
733 RADIUSD_VERSION="${RADIUSD_MAJOR_VERSION}.${RADIUSD_MINOR_VERSION}"
736 # Extract the first word of "gcc", so it can be a program name with args.
737 set dummy gcc; ac_word=$2
738 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
739 echo "configure:740: checking for $ac_word" >&5
740 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
741 echo $ac_n "(cached) $ac_c" 1>&6
743 if test -n "$CC"; then
744 ac_cv_prog_CC="$CC" # Let the user override the test.
746 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
748 for ac_dir in $ac_dummy; do
749 test -z "$ac_dir" && ac_dir=.
750 if test -f $ac_dir/$ac_word; then
759 if test -n "$CC"; then
760 echo "$ac_t""$CC" 1>&6
762 echo "$ac_t""no" 1>&6
765 if test -z "$CC"; then
766 # Extract the first word of "cc", so it can be a program name with args.
767 set dummy cc; ac_word=$2
768 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
769 echo "configure:770: checking for $ac_word" >&5
770 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
771 echo $ac_n "(cached) $ac_c" 1>&6
773 if test -n "$CC"; then
774 ac_cv_prog_CC="$CC" # Let the user override the test.
776 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
779 for ac_dir in $ac_dummy; do
780 test -z "$ac_dir" && ac_dir=.
781 if test -f $ac_dir/$ac_word; then
782 if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
791 if test $ac_prog_rejected = yes; then
792 # We found a bogon in the path, so make sure we never use it.
793 set dummy $ac_cv_prog_CC
795 if test $# -gt 0; then
796 # We chose a different compiler from the bogus one.
797 # However, it has the same basename, so the bogon will be chosen
798 # first if we set CC to just the basename; use the full file name.
800 set dummy "$ac_dir/$ac_word" "$@"
808 if test -n "$CC"; then
809 echo "$ac_t""$CC" 1>&6
811 echo "$ac_t""no" 1>&6
814 if test -z "$CC"; then
817 # Extract the first word of "cl", so it can be a program name with args.
818 set dummy cl; ac_word=$2
819 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
820 echo "configure:821: checking for $ac_word" >&5
821 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
822 echo $ac_n "(cached) $ac_c" 1>&6
824 if test -n "$CC"; then
825 ac_cv_prog_CC="$CC" # Let the user override the test.
827 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
829 for ac_dir in $ac_dummy; do
830 test -z "$ac_dir" && ac_dir=.
831 if test -f $ac_dir/$ac_word; then
840 if test -n "$CC"; then
841 echo "$ac_t""$CC" 1>&6
843 echo "$ac_t""no" 1>&6
848 test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
851 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
852 echo "configure:853: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
855 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
856 ac_cpp='$CPP $CPPFLAGS'
857 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
858 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
859 cross_compiling=$ac_cv_prog_cc_cross
861 cat > conftest.$ac_ext << EOF
863 #line 864 "configure"
864 #include "confdefs.h"
868 if { (eval echo configure:869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
869 ac_cv_prog_cc_works=yes
870 # If we can't run a trivial program, we are probably using a cross compiler.
871 if (./conftest; exit) 2>/dev/null; then
872 ac_cv_prog_cc_cross=no
874 ac_cv_prog_cc_cross=yes
877 echo "configure: failed program was:" >&5
878 cat conftest.$ac_ext >&5
879 ac_cv_prog_cc_works=no
883 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
884 ac_cpp='$CPP $CPPFLAGS'
885 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
886 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
887 cross_compiling=$ac_cv_prog_cc_cross
889 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
890 if test $ac_cv_prog_cc_works = no; then
891 { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
893 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
894 echo "configure:895: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
895 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
896 cross_compiling=$ac_cv_prog_cc_cross
898 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
899 echo "configure:900: checking whether we are using GNU C" >&5
900 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
901 echo $ac_n "(cached) $ac_c" 1>&6
903 cat > conftest.c <<EOF
908 if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:909: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
915 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
917 if test $ac_cv_prog_gcc = yes; then
923 ac_test_CFLAGS="${CFLAGS+set}"
924 ac_save_CFLAGS="$CFLAGS"
926 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
927 echo "configure:928: checking whether ${CC-cc} accepts -g" >&5
928 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
929 echo $ac_n "(cached) $ac_c" 1>&6
931 echo 'void f(){}' > conftest.c
932 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
941 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
942 if test "$ac_test_CFLAGS" = set; then
943 CFLAGS="$ac_save_CFLAGS"
944 elif test $ac_cv_prog_cc_g = yes; then
945 if test "$GCC" = yes; then
951 if test "$GCC" = yes; then
958 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
959 echo "configure:960: checking how to run the C preprocessor" >&5
960 # On Suns, sometimes $CPP names a directory.
961 if test -n "$CPP" && test -d "$CPP"; then
964 if test -z "$CPP"; then
965 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
966 echo $ac_n "(cached) $ac_c" 1>&6
968 # This must be in double quotes, not single quotes, because CPP may get
969 # substituted into the Makefile and "${CC-cc}" will confuse make.
971 # On the NeXT, cc -E runs the code through the compiler's parser,
972 # not just through cpp.
973 cat > conftest.$ac_ext <<EOF
974 #line 975 "configure"
975 #include "confdefs.h"
979 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
980 { (eval echo configure:981: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
981 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
982 if test -z "$ac_err"; then
986 echo "configure: failed program was:" >&5
987 cat conftest.$ac_ext >&5
989 CPP="${CC-cc} -E -traditional-cpp"
990 cat > conftest.$ac_ext <<EOF
991 #line 992 "configure"
992 #include "confdefs.h"
996 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
997 { (eval echo configure:998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
998 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
999 if test -z "$ac_err"; then
1003 echo "configure: failed program was:" >&5
1004 cat conftest.$ac_ext >&5
1006 CPP="${CC-cc} -nologo -E"
1007 cat > conftest.$ac_ext <<EOF
1008 #line 1009 "configure"
1009 #include "confdefs.h"
1013 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1014 { (eval echo configure:1015: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1015 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
1016 if test -z "$ac_err"; then
1020 echo "configure: failed program was:" >&5
1021 cat conftest.$ac_ext >&5
1030 ac_cv_prog_CPP="$CPP"
1032 CPP="$ac_cv_prog_CPP"
1034 ac_cv_prog_CPP="$CPP"
1036 echo "$ac_t""$CPP" 1>&6
1038 if test $ac_cv_prog_gcc = yes; then
1039 echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
1040 echo "configure:1041: checking whether ${CC-cc} needs -traditional" >&5
1041 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
1042 echo $ac_n "(cached) $ac_c" 1>&6
1044 ac_pattern="Autoconf.*'x'"
1045 cat > conftest.$ac_ext <<EOF
1046 #line 1047 "configure"
1047 #include "confdefs.h"
1051 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1052 egrep "$ac_pattern" >/dev/null 2>&1; then
1054 ac_cv_prog_gcc_traditional=yes
1057 ac_cv_prog_gcc_traditional=no
1062 if test $ac_cv_prog_gcc_traditional = no; then
1063 cat > conftest.$ac_ext <<EOF
1064 #line 1065 "configure"
1065 #include "confdefs.h"
1069 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1070 egrep "$ac_pattern" >/dev/null 2>&1; then
1072 ac_cv_prog_gcc_traditional=yes
1079 echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
1080 if test $ac_cv_prog_gcc_traditional = yes; then
1081 CC="$CC -traditional"
1085 echo $ac_n "checking whether we are using SUNPro C""... $ac_c" 1>&6
1086 echo "configure:1087: checking whether we are using SUNPro C" >&5
1087 if eval "test \"`echo '$''{'ac_cv_prog_suncc'+set}'`\" = set"; then
1088 echo $ac_n "(cached) $ac_c" 1>&6
1090 cat > conftest.c <<EOF
1095 if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1096: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
1096 ac_cv_prog_suncc=yes
1102 echo "$ac_t""$ac_cv_prog_suncc" 1>&6
1103 # Extract the first word of "ranlib", so it can be a program name with args.
1104 set dummy ranlib; ac_word=$2
1105 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1106 echo "configure:1107: checking for $ac_word" >&5
1107 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
1108 echo $ac_n "(cached) $ac_c" 1>&6
1110 if test -n "$RANLIB"; then
1111 ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
1113 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1115 for ac_dir in $ac_dummy; do
1116 test -z "$ac_dir" && ac_dir=.
1117 if test -f $ac_dir/$ac_word; then
1118 ac_cv_prog_RANLIB="ranlib"
1123 test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
1126 RANLIB="$ac_cv_prog_RANLIB"
1127 if test -n "$RANLIB"; then
1128 echo "$ac_t""$RANLIB" 1>&6
1130 echo "$ac_t""no" 1>&6
1137 echo $ac_n "checking for AIX""... $ac_c" 1>&6
1138 echo "configure:1139: checking for AIX" >&5
1139 cat > conftest.$ac_ext <<EOF
1140 #line 1141 "configure"
1141 #include "confdefs.h"
1147 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1148 egrep "yes" >/dev/null 2>&1; then
1150 echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
1151 #define _ALL_SOURCE 1
1156 echo "$ac_t""no" 1>&6
1162 # Extract the first word of "gmake", so it can be a program name with args.
1163 set dummy gmake; ac_word=$2
1164 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1165 echo "configure:1166: checking for $ac_word" >&5
1166 if eval "test \"`echo '$''{'ac_cv_prog_GMAKE'+set}'`\" = set"; then
1167 echo $ac_n "(cached) $ac_c" 1>&6
1169 if test -n "$GMAKE"; then
1170 ac_cv_prog_GMAKE="$GMAKE" # Let the user override the test.
1172 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1174 for ac_dir in $ac_dummy; do
1175 test -z "$ac_dir" && ac_dir=.
1176 if test -f $ac_dir/$ac_word; then
1177 ac_cv_prog_GMAKE="yes"
1182 test -z "$ac_cv_prog_GMAKE" && ac_cv_prog_GMAKE="no"
1185 GMAKE="$ac_cv_prog_GMAKE"
1186 if test -n "$GMAKE"; then
1187 echo "$ac_t""$GMAKE" 1>&6
1189 echo "$ac_t""no" 1>&6
1192 if test $GMAKE = no; then
1193 # Extract the first word of "make", so it can be a program name with args.
1194 set dummy make; ac_word=$2
1195 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1196 echo "configure:1197: checking for $ac_word" >&5
1197 if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
1198 echo $ac_n "(cached) $ac_c" 1>&6
1202 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
1205 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a dos path.
1208 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1210 for ac_dir in $ac_dummy; do
1211 test -z "$ac_dir" && ac_dir=.
1212 if test -f $ac_dir/$ac_word; then
1213 ac_cv_path_MAKE="$ac_dir/$ac_word"
1218 test -z "$ac_cv_path_MAKE" && ac_cv_path_MAKE="/usr/local/bin/make"
1222 MAKE="$ac_cv_path_MAKE"
1223 if test -n "$MAKE"; then
1224 echo "$ac_t""$MAKE" 1>&6
1226 echo "$ac_t""no" 1>&6
1230 # Extract the first word of "gmake", so it can be a program name with args.
1231 set dummy gmake; ac_word=$2
1232 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1233 echo "configure:1234: checking for $ac_word" >&5
1234 if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
1235 echo $ac_n "(cached) $ac_c" 1>&6
1239 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
1242 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a dos path.
1245 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1247 for ac_dir in $ac_dummy; do
1248 test -z "$ac_dir" && ac_dir=.
1249 if test -f $ac_dir/$ac_word; then
1250 ac_cv_path_MAKE="$ac_dir/$ac_word"
1255 test -z "$ac_cv_path_MAKE" && ac_cv_path_MAKE="/usr/local/gnu/bin/make"
1259 MAKE="$ac_cv_path_MAKE"
1260 if test -n "$MAKE"; then
1261 echo "$ac_t""$MAKE" 1>&6
1263 echo "$ac_t""no" 1>&6
1267 makever=`$ac_cv_path_MAKE --version 2>&1 | grep "GNU Make"`
1268 if test -z "$makever"; then
1269 { echo "configure: error: GNU Make is not installed. Please download and install it
1270 from ftp://prep.ai.mit.edu/pub/gnu/make/ before continuing." 1>&2; exit 1; }
1274 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
1275 if test -f $ac_dir/install-sh; then
1277 ac_install_sh="$ac_aux_dir/install-sh -c"
1279 elif test -f $ac_dir/install.sh; then
1281 ac_install_sh="$ac_aux_dir/install.sh -c"
1285 if test -z "$ac_aux_dir"; then
1286 { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
1288 ac_config_guess=$ac_aux_dir/config.guess
1289 ac_config_sub=$ac_aux_dir/config.sub
1290 ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
1292 # Check whether --enable-ltdl-install or --disable-ltdl-install was given.
1293 if test "${enable_ltdl_install+set}" = set; then
1294 enableval="$enable_ltdl_install"
1298 if test x"${enable_ltdl_install+set}" != xset; then
1299 enable_ltdl_install=yes
1300 ac_configure_args="$ac_configure_args --enable-ltdl-install"
1302 # Check whether --with-ltdl-lib or --without-ltdl-lib was given.
1303 if test "${with_ltdl_lib+set}" = set; then
1304 withval="$with_ltdl_lib"
1305 if test x"withval" = x"yes" || test x"withval" = x"no" ; then
1306 echo "configure: warning: specify location of libltdl library" 1>&2
1313 save_LDFLAGS="$LDFLAGS"
1314 test -z "$withval" || LDFLAGS="$LDFLAGS -L$withval"
1315 echo $ac_n "checking for lt_dlinit in -lltdl""... $ac_c" 1>&6
1316 echo "configure:1317: checking for lt_dlinit in -lltdl" >&5
1317 ac_lib_var=`echo ltdl'_'lt_dlinit | sed 'y%./+-%__p_%'`
1318 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
1319 echo $ac_n "(cached) $ac_c" 1>&6
1321 ac_save_LIBS="$LIBS"
1323 cat > conftest.$ac_ext <<EOF
1324 #line 1325 "configure"
1325 #include "confdefs.h"
1326 /* Override any gcc2 internal prototype to avoid an error. */
1327 /* We use char because int might match the return type of a gcc2
1328 builtin and then its argument prototype would still apply. */
1335 if { (eval echo configure:1336: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
1337 eval "ac_cv_lib_$ac_lib_var=yes"
1339 echo "configure: failed program was:" >&5
1340 cat conftest.$ac_ext >&5
1342 eval "ac_cv_lib_$ac_lib_var=no"
1345 LIBS="$ac_save_LIBS"
1348 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
1349 echo "$ac_t""yes" 1>&6
1353 # Check whether --with-ltdl-include or --without-ltdl-include was given.
1354 if test "${with_ltdl_include+set}" = set; then
1355 withval="$with_ltdl_include"
1356 if test x"withval" = x"yes" || test x"withval" = x"no" ; then
1357 echo "configure: warning: specify location of ltdl.h" 1>&2
1360 save_CPPFLAGS="$CPPFLAGS"
1361 CPPFLAGS="$CPPFLAGS -I$withval"
1362 ac_safe=`echo "ltdl.h" | sed 'y%./+-%__p_%'`
1363 echo $ac_n "checking for ltdl.h""... $ac_c" 1>&6
1364 echo "configure:1365: checking for ltdl.h" >&5
1365 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
1366 echo $ac_n "(cached) $ac_c" 1>&6
1368 cat > conftest.$ac_ext <<EOF
1369 #line 1370 "configure"
1370 #include "confdefs.h"
1373 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1374 { (eval echo configure:1375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1375 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
1376 if test -z "$ac_err"; then
1378 eval "ac_cv_header_$ac_safe=yes"
1381 echo "configure: failed program was:" >&5
1382 cat conftest.$ac_ext >&5
1384 eval "ac_cv_header_$ac_safe=no"
1388 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
1389 echo "$ac_t""yes" 1>&6
1391 INCLTDL="-I$withval"
1393 ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
1396 echo "$ac_t""no" 1>&6
1399 CPPFLAGS="$save_CPPFLAGS"
1405 echo "$ac_t""no" 1>&6
1408 LDFLAGS="$save_LDFLAGS"
1410 if test x"$enable_ltdl_install" = xno && test x"$ltdl_found" != xyes; then
1411 echo "configure: warning: libltdl not installed, but installation disabled" 1>&2
1413 if test x"$ltdl_found" = xyes; then
1414 enable_ltdl_install="no"
1417 if test x"$enable_ltdl_install" = x"yes"; then
1418 ac_configure_args="$ac_configure_args --enable-ltdl-install"
1419 LIBLTDL='${top_builddir}/''libltdl'/libltdl.la
1420 INCLTDL='-I${top_srcdir}/''libltdl'
1428 # Find the correct PATH separator. Usually this is `:', but
1429 # DJGPP uses `;' like DOS.
1430 if test "X${PATH_SEPARATOR+set}" != Xset; then
1431 UNAME=${UNAME-`uname 2>/dev/null`}
1433 *-DOS) lt_cv_sys_path_separator=';' ;;
1434 *) lt_cv_sys_path_separator=':' ;;
1436 PATH_SEPARATOR=$lt_cv_sys_path_separator
1439 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
1440 echo "configure:1441: checking for Cygwin environment" >&5
1441 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
1442 echo $ac_n "(cached) $ac_c" 1>&6
1444 cat > conftest.$ac_ext <<EOF
1445 #line 1446 "configure"
1446 #include "confdefs.h"
1451 #define __CYGWIN__ __CYGWIN32__
1456 if { (eval echo configure:1457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1460 echo "configure: failed program was:" >&5
1461 cat conftest.$ac_ext >&5
1469 echo "$ac_t""$ac_cv_cygwin" 1>&6
1471 test "$ac_cv_cygwin" = yes && CYGWIN=yes
1472 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
1473 echo "configure:1474: checking for mingw32 environment" >&5
1474 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
1475 echo $ac_n "(cached) $ac_c" 1>&6
1477 cat > conftest.$ac_ext <<EOF
1478 #line 1479 "configure"
1479 #include "confdefs.h"
1485 if { (eval echo configure:1486: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1489 echo "configure: failed program was:" >&5
1490 cat conftest.$ac_ext >&5
1498 echo "$ac_t""$ac_cv_mingw32" 1>&6
1500 test "$ac_cv_mingw32" = yes && MINGW32=yes
1501 # Check whether --enable-shared or --disable-shared was given.
1502 if test "${enable_shared+set}" = set; then
1503 enableval="$enable_shared"
1504 p=${PACKAGE-default}
1506 yes) enable_shared=yes ;;
1507 no) enable_shared=no ;;
1510 # Look at the argument we got. We use all the common list separators.
1511 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
1512 for pkg in $enableval; do
1513 if test "X$pkg" = "X$p"; then
1524 # Check whether --enable-static or --disable-static was given.
1525 if test "${enable_static+set}" = set; then
1526 enableval="$enable_static"
1527 p=${PACKAGE-default}
1529 yes) enable_static=yes ;;
1530 no) enable_static=no ;;
1533 # Look at the argument we got. We use all the common list separators.
1534 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
1535 for pkg in $enableval; do
1536 if test "X$pkg" = "X$p"; then
1547 # Check whether --enable-fast-install or --disable-fast-install was given.
1548 if test "${enable_fast_install+set}" = set; then
1549 enableval="$enable_fast_install"
1550 p=${PACKAGE-default}
1552 yes) enable_fast_install=yes ;;
1553 no) enable_fast_install=no ;;
1555 enable_fast_install=no
1556 # Look at the argument we got. We use all the common list separators.
1557 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
1558 for pkg in $enableval; do
1559 if test "X$pkg" = "X$p"; then
1560 enable_fast_install=yes
1567 enable_fast_install=yes
1571 # Make sure we can run config.sub.
1572 if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
1573 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
1576 echo $ac_n "checking host system type""... $ac_c" 1>&6
1577 echo "configure:1578: checking host system type" >&5
1580 case "$host_alias" in
1584 if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
1585 else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
1587 *) host_alias=$nonopt ;;
1591 host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
1592 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1593 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1594 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1595 echo "$ac_t""$host" 1>&6
1597 echo $ac_n "checking build system type""... $ac_c" 1>&6
1598 echo "configure:1599: checking build system type" >&5
1601 case "$build_alias" in
1604 NONE) build_alias=$host_alias ;;
1605 *) build_alias=$nonopt ;;
1609 build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
1610 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1611 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1612 build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1613 echo "$ac_t""$build" 1>&6
1615 # Check whether --with-gnu-ld or --without-gnu-ld was given.
1616 if test "${with_gnu_ld+set}" = set; then
1617 withval="$with_gnu_ld"
1618 test "$withval" = no || with_gnu_ld=yes
1624 if test "$GCC" = yes; then
1625 # Check if gcc -print-prog-name=ld gives a path.
1626 echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
1627 echo "configure:1628: checking for ld used by GCC" >&5
1630 # gcc leaves a trailing carriage return which upsets mingw
1631 ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
1633 ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
1636 # Accept absolute paths.
1637 [\\/]* | [A-Za-z]:[\\/]*)
1638 re_direlt='/[^/][^/]*/\.\./'
1639 # Canonicalize the path of ld
1640 ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
1641 while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
1642 ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
1644 test -z "$LD" && LD="$ac_prog"
1647 # If it fails, then pretend we aren't using GCC.
1651 # If it is relative, then search for the first ld in PATH.
1655 elif test "$with_gnu_ld" = yes; then
1656 echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
1657 echo "configure:1658: checking for GNU ld" >&5
1659 echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
1660 echo "configure:1661: checking for non-GNU ld" >&5
1662 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
1663 echo $ac_n "(cached) $ac_c" 1>&6
1665 if test -z "$LD"; then
1666 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
1667 for ac_dir in $PATH; do
1668 test -z "$ac_dir" && ac_dir=.
1669 if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
1670 lt_cv_path_LD="$ac_dir/$ac_prog"
1671 # Check to see if the program is GNU ld. I'd rather use --version,
1672 # but apparently some GNU ld's only accept -v.
1673 # Break only if it was the GNU/non-GNU ld that we prefer.
1674 if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
1675 test "$with_gnu_ld" != no && break
1677 test "$with_gnu_ld" != yes && break
1683 lt_cv_path_LD="$LD" # Let the user override the test with a path.
1688 if test -n "$LD"; then
1689 echo "$ac_t""$LD" 1>&6
1691 echo "$ac_t""no" 1>&6
1693 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
1694 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
1695 echo "configure:1696: checking if the linker ($LD) is GNU ld" >&5
1696 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
1697 echo $ac_n "(cached) $ac_c" 1>&6
1699 # I'd rather use --version here, but apparently some GNU ld's only accept -v.
1700 if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
1701 lt_cv_prog_gnu_ld=yes
1703 lt_cv_prog_gnu_ld=no
1707 echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
1708 with_gnu_ld=$lt_cv_prog_gnu_ld
1711 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
1712 echo "configure:1713: checking for $LD option to reload object files" >&5
1713 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
1714 echo $ac_n "(cached) $ac_c" 1>&6
1716 lt_cv_ld_reload_flag='-r'
1719 echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
1720 reload_flag=$lt_cv_ld_reload_flag
1721 test -n "$reload_flag" && reload_flag=" $reload_flag"
1723 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
1724 echo "configure:1725: checking for BSD-compatible nm" >&5
1725 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
1726 echo $ac_n "(cached) $ac_c" 1>&6
1728 if test -n "$NM"; then
1729 # Let the user override the test.
1732 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
1733 for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
1734 test -z "$ac_dir" && ac_dir=.
1735 tmp_nm=$ac_dir/${ac_tool_prefix}nm
1736 if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
1737 # Check to see if the nm accepts a BSD-compat flag.
1738 # Adding the `sed 1q' prevents false positives on HP-UX, which says:
1739 # nm: unknown option "B" ignored
1740 # Tru64's nm complains that /dev/null is an invalid object file
1741 if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
1742 lt_cv_path_NM="$tmp_nm -B"
1744 elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
1745 lt_cv_path_NM="$tmp_nm -p"
1748 lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
1749 continue # so that we can try to find one that supports BSD flags
1754 test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
1759 echo "$ac_t""$NM" 1>&6
1761 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
1762 echo "configure:1763: checking whether ln -s works" >&5
1763 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
1764 echo $ac_n "(cached) $ac_c" 1>&6
1767 if ln -s X conftestdata 2>/dev/null
1770 ac_cv_prog_LN_S="ln -s"
1775 LN_S="$ac_cv_prog_LN_S"
1776 if test "$ac_cv_prog_LN_S" = "ln -s"; then
1777 echo "$ac_t""yes" 1>&6
1779 echo "$ac_t""no" 1>&6
1782 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
1783 echo "configure:1784: checking how to recognise dependant libraries" >&5
1784 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
1785 echo $ac_n "(cached) $ac_c" 1>&6
1787 lt_cv_file_magic_cmd='$MAGIC_CMD'
1788 lt_cv_file_magic_test_file=
1789 lt_cv_deplibs_check_method='unknown'
1790 # Need to set the preceding variable on all platforms that support
1791 # interlibrary dependencies.
1792 # 'none' -- dependencies not supported.
1793 # `unknown' -- same as none, but documents that we really don't know.
1794 # 'pass_all' -- all dependencies passed with no checks.
1795 # 'test_compile' -- check by making test program.
1796 # 'file_magic [[regex]]' -- check by looking for files in library path
1797 # which responds to the $file_magic_cmd with a given egrep regex.
1798 # If you have `file' or equivalent on your system and you're not sure
1799 # whether `pass_all' will *always* work, you probably want this one.
1803 lt_cv_deplibs_check_method=pass_all
1807 lt_cv_deplibs_check_method=pass_all
1811 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
1812 lt_cv_file_magic_cmd='/usr/bin/file -L'
1813 lt_cv_file_magic_test_file=/shlib/libc.so
1816 cygwin* | mingw* | pw32*)
1817 lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
1818 lt_cv_file_magic_cmd='$OBJDUMP -f'
1821 darwin* | rhapsody*)
1822 lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
1823 lt_cv_file_magic_cmd='/usr/bin/file -L'
1825 rhapsody* | darwin1.[012])
1826 lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
1829 lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
1835 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
1838 # Not sure whether the presence of OpenBSD here was a mistake.
1839 # Let's accept both of them until this is cleared up.
1840 lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
1841 lt_cv_file_magic_cmd=/usr/bin/file
1842 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
1846 lt_cv_deplibs_check_method=pass_all
1851 lt_cv_deplibs_check_method=pass_all
1855 lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
1856 lt_cv_file_magic_cmd=/usr/bin/file
1857 lt_cv_file_magic_test_file=/usr/lib/libc.sl
1863 # this will be overridden with pass_all, but let us keep it just in case
1864 lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
1868 *-32|*"-32 ") libmagic=32-bit;;
1869 *-n32|*"-n32 ") libmagic=N32;;
1870 *-64|*"-64 ") libmagic=64-bit;;
1871 *) libmagic=never-match;;
1873 # this will be overridden with pass_all, but let us keep it just in case
1874 lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
1877 lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
1878 lt_cv_deplibs_check_method=pass_all
1881 # This must be Linux ELF.
1884 alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
1885 lt_cv_deplibs_check_method=pass_all ;;
1887 # glibc up to 2.1.1 does not perform some relocations on ARM
1888 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
1890 lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
1894 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
1895 lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
1897 lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
1902 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
1903 lt_cv_file_magic_cmd=/usr/bin/file
1904 lt_cv_file_magic_test_file=/usr/lib/libnls.so
1908 lt_cv_file_magic_cmd=/usr/bin/file
1909 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
1910 if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
1911 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
1913 lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
1917 osf3* | osf4* | osf5*)
1918 # this will be overridden with pass_all, but let us keep it just in case
1919 lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
1920 lt_cv_file_magic_test_file=/shlib/libc.so
1921 lt_cv_deplibs_check_method=pass_all
1925 lt_cv_deplibs_check_method=pass_all
1929 lt_cv_deplibs_check_method=pass_all
1930 lt_cv_file_magic_test_file=/lib/libc.so
1933 sysv5uw[78]* | sysv4*uw2*)
1934 lt_cv_deplibs_check_method=pass_all
1937 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
1938 case $host_vendor in
1940 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
1941 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
1944 lt_cv_deplibs_check_method=pass_all
1947 lt_cv_file_magic_cmd='/bin/file'
1948 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
1951 lt_cv_file_magic_cmd='/bin/file'
1952 lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
1953 lt_cv_file_magic_test_file=/lib/libc.so
1961 echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
1962 file_magic_cmd=$lt_cv_file_magic_cmd
1963 deplibs_check_method=$lt_cv_deplibs_check_method
1965 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
1966 echo "configure:1967: checking for object suffix" >&5
1967 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
1968 echo $ac_n "(cached) $ac_c" 1>&6
1971 echo 'int i = 1;' > conftest.$ac_ext
1972 if { (eval echo configure:1973: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1973 for ac_file in conftest.*; do
1976 *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
1980 { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
1985 echo "$ac_t""$ac_cv_objext" 1>&6
1986 OBJEXT=$ac_cv_objext
1987 ac_objext=$ac_cv_objext
1991 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
1992 echo "configure:1993: checking for executable suffix" >&5
1993 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
1994 echo $ac_n "(cached) $ac_c" 1>&6
1996 if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
2000 echo 'int main () { return 0; }' > conftest.$ac_ext
2002 if { (eval echo configure:2003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
2003 for file in conftest.*; do
2005 *.$ac_ext | *.c | *.o | *.obj) ;;
2006 *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
2010 { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
2013 test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
2018 test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
2019 echo "$ac_t""${ac_cv_exeext}" 1>&6
2022 if test $host != $build; then
2023 ac_tool_prefix=${host_alias}-
2031 # Check for command to grab the raw symbol name followed by C symbol from nm.
2032 echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
2033 echo "configure:2034: checking command to parse $NM output" >&5
2034 if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
2035 echo $ac_n "(cached) $ac_c" 1>&6
2038 # These are sane defaults that work on at least a few old systems.
2039 # [They come from Ultrix. What could be older than Ultrix?!! ;)]
2041 # Character class describing NM global symbol codes.
2042 symcode='[BCDEGRST]'
2044 # Regexp to match symbols that can be accessed directly from C.
2045 sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
2047 # Transform the above into a raw symbol and a C symbol.
2048 symxfrm='\1 \2\3 \3'
2050 # Transform an extracted symbol line into a proper C declaration
2051 lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
2053 # Transform an extracted symbol line into symbol name and symbol address
2054 lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
2056 # Define system-specific variables.
2061 cygwin* | mingw* | pw32*)
2062 symcode='[ABCDGISTW]'
2064 hpux*) # Its linker distinguishes data from code symbols
2065 lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
2066 lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
2069 symcode='[BCDEGRST]'
2079 # Handle CRLF in mingw tool chain
2083 opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
2087 # If we're using GNU nm, then use its standard symbol codes.
2088 if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
2089 symcode='[ABCDGISTW]'
2092 # Try without a prefix undercore, then with it.
2093 for ac_symprfx in "" "_"; do
2095 # Write the raw and C identifiers.
2096 lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
2098 # Check to see that the pipe works correctly.
2101 cat > conftest.$ac_ext <<EOF
2106 void nm_test_func(){}
2110 int main(){nm_test_var='a';nm_test_func();return(0);}
2113 if { (eval echo configure:2114: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2114 # Now try to grab the symbols.
2116 if { (eval echo configure:2117: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
2117 # Try sorting and uniquifying the output.
2118 if sort "$nlist" | uniq > "$nlist"T; then
2119 mv -f "$nlist"T "$nlist"
2124 # Make sure that we snagged all the symbols we need.
2125 if egrep ' nm_test_var$' "$nlist" >/dev/null; then
2126 if egrep ' nm_test_func$' "$nlist" >/dev/null; then
2127 cat <<EOF > conftest.$ac_ext
2133 # Now generate the symbol file.
2134 eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
2136 cat <<EOF >> conftest.$ac_ext
2137 #if defined (__STDC__) && __STDC__
2138 # define lt_ptr void *
2140 # define lt_ptr char *
2144 /* The mapping between symbol names and symbols. */
2149 lt_preloaded_symbols[] =
2152 sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
2153 cat <<\EOF >> conftest.$ac_ext
2161 # Now try linking the two files.
2162 mv conftest.$ac_objext conftstm.$ac_objext
2164 save_CFLAGS="$CFLAGS"
2165 LIBS="conftstm.$ac_objext"
2166 CFLAGS="$CFLAGS$no_builtin_flag"
2167 if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
2171 CFLAGS="$save_CFLAGS"
2173 echo "cannot find nm_test_func in $nlist" >&5
2176 echo "cannot find nm_test_var in $nlist" >&5
2179 echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
2182 echo "$progname: failed program was:" >&5
2183 cat conftest.$ac_ext >&5
2185 rm -f conftest* conftst*
2187 # Do not use the global_symbol_pipe unless it works.
2188 if test "$pipe_works" = yes; then
2191 lt_cv_sys_global_symbol_pipe=
2197 global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
2198 if test -z "$lt_cv_sys_global_symbol_pipe"; then
2199 global_symbol_to_cdecl=
2200 global_symbol_to_c_name_address=
2202 global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
2203 global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
2205 if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
2207 echo "$ac_t""failed" 1>&6
2209 echo "$ac_t""ok" 1>&6
2212 for ac_hdr in dlfcn.h
2214 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
2215 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
2216 echo "configure:2217: checking for $ac_hdr" >&5
2217 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
2218 echo $ac_n "(cached) $ac_c" 1>&6
2220 cat > conftest.$ac_ext <<EOF
2221 #line 2222 "configure"
2222 #include "confdefs.h"
2225 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
2226 { (eval echo configure:2227: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
2227 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
2228 if test -z "$ac_err"; then
2230 eval "ac_cv_header_$ac_safe=yes"
2233 echo "configure: failed program was:" >&5
2234 cat conftest.$ac_ext >&5
2236 eval "ac_cv_header_$ac_safe=no"
2240 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
2241 echo "$ac_t""yes" 1>&6
2242 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
2243 cat >> confdefs.h <<EOF
2244 #define $ac_tr_hdr 1
2248 echo "$ac_t""no" 1>&6
2256 # Only perform the check for file, if the check method requires it
2257 case $deplibs_check_method in
2259 if test "$file_magic_cmd" = '$MAGIC_CMD'; then
2260 echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
2261 echo "configure:2262: checking for ${ac_tool_prefix}file" >&5
2262 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
2263 echo $ac_n "(cached) $ac_c" 1>&6
2267 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
2270 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
2273 ac_save_MAGIC_CMD="$MAGIC_CMD"
2274 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2275 ac_dummy="/usr/bin:$PATH"
2276 for ac_dir in $ac_dummy; do
2277 test -z "$ac_dir" && ac_dir=.
2278 if test -f $ac_dir/${ac_tool_prefix}file; then
2279 lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
2280 if test -n "$file_magic_test_file"; then
2281 case $deplibs_check_method in
2283 file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
2284 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2285 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
2286 egrep "$file_magic_regex" > /dev/null; then
2291 *** Warning: the command libtool uses to detect shared libraries,
2292 *** $file_magic_cmd, produces output that libtool cannot recognize.
2293 *** The result is that libtool may fail to recognize shared libraries
2294 *** as such. This will affect the creation of libtool libraries that
2295 *** depend on shared libraries, but programs linked with such libtool
2296 *** libraries will work regardless of this problem. Nevertheless, you
2297 *** may want to report the problem to your system manager and/or to
2298 *** bug-libtool@gnu.org
2308 MAGIC_CMD="$ac_save_MAGIC_CMD"
2313 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2314 if test -n "$MAGIC_CMD"; then
2315 echo "$ac_t""$MAGIC_CMD" 1>&6
2317 echo "$ac_t""no" 1>&6
2320 if test -z "$lt_cv_path_MAGIC_CMD"; then
2321 if test -n "$ac_tool_prefix"; then
2322 echo $ac_n "checking for file""... $ac_c" 1>&6
2323 echo "configure:2324: checking for file" >&5
2324 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
2325 echo $ac_n "(cached) $ac_c" 1>&6
2329 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
2332 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
2335 ac_save_MAGIC_CMD="$MAGIC_CMD"
2336 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2337 ac_dummy="/usr/bin:$PATH"
2338 for ac_dir in $ac_dummy; do
2339 test -z "$ac_dir" && ac_dir=.
2340 if test -f $ac_dir/file; then
2341 lt_cv_path_MAGIC_CMD="$ac_dir/file"
2342 if test -n "$file_magic_test_file"; then
2343 case $deplibs_check_method in
2345 file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
2346 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2347 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
2348 egrep "$file_magic_regex" > /dev/null; then
2353 *** Warning: the command libtool uses to detect shared libraries,
2354 *** $file_magic_cmd, produces output that libtool cannot recognize.
2355 *** The result is that libtool may fail to recognize shared libraries
2356 *** as such. This will affect the creation of libtool libraries that
2357 *** depend on shared libraries, but programs linked with such libtool
2358 *** libraries will work regardless of this problem. Nevertheless, you
2359 *** may want to report the problem to your system manager and/or to
2360 *** bug-libtool@gnu.org
2370 MAGIC_CMD="$ac_save_MAGIC_CMD"
2375 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2376 if test -n "$MAGIC_CMD"; then
2377 echo "$ac_t""$MAGIC_CMD" 1>&6
2379 echo "$ac_t""no" 1>&6
2391 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
2392 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
2393 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2394 echo "configure:2395: checking for $ac_word" >&5
2395 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
2396 echo $ac_n "(cached) $ac_c" 1>&6
2398 if test -n "$RANLIB"; then
2399 ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
2401 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2403 for ac_dir in $ac_dummy; do
2404 test -z "$ac_dir" && ac_dir=.
2405 if test -f $ac_dir/$ac_word; then
2406 ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
2413 RANLIB="$ac_cv_prog_RANLIB"
2414 if test -n "$RANLIB"; then
2415 echo "$ac_t""$RANLIB" 1>&6
2417 echo "$ac_t""no" 1>&6
2421 if test -z "$ac_cv_prog_RANLIB"; then
2422 if test -n "$ac_tool_prefix"; then
2423 # Extract the first word of "ranlib", so it can be a program name with args.
2424 set dummy ranlib; ac_word=$2
2425 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2426 echo "configure:2427: checking for $ac_word" >&5
2427 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
2428 echo $ac_n "(cached) $ac_c" 1>&6
2430 if test -n "$RANLIB"; then
2431 ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
2433 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2435 for ac_dir in $ac_dummy; do
2436 test -z "$ac_dir" && ac_dir=.
2437 if test -f $ac_dir/$ac_word; then
2438 ac_cv_prog_RANLIB="ranlib"
2443 test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
2446 RANLIB="$ac_cv_prog_RANLIB"
2447 if test -n "$RANLIB"; then
2448 echo "$ac_t""$RANLIB" 1>&6
2450 echo "$ac_t""no" 1>&6
2458 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
2459 set dummy ${ac_tool_prefix}strip; ac_word=$2
2460 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2461 echo "configure:2462: checking for $ac_word" >&5
2462 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
2463 echo $ac_n "(cached) $ac_c" 1>&6
2465 if test -n "$STRIP"; then
2466 ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
2468 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2470 for ac_dir in $ac_dummy; do
2471 test -z "$ac_dir" && ac_dir=.
2472 if test -f $ac_dir/$ac_word; then
2473 ac_cv_prog_STRIP="${ac_tool_prefix}strip"
2480 STRIP="$ac_cv_prog_STRIP"
2481 if test -n "$STRIP"; then
2482 echo "$ac_t""$STRIP" 1>&6
2484 echo "$ac_t""no" 1>&6
2488 if test -z "$ac_cv_prog_STRIP"; then
2489 if test -n "$ac_tool_prefix"; then
2490 # Extract the first word of "strip", so it can be a program name with args.
2491 set dummy strip; ac_word=$2
2492 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2493 echo "configure:2494: checking for $ac_word" >&5
2494 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
2495 echo $ac_n "(cached) $ac_c" 1>&6
2497 if test -n "$STRIP"; then
2498 ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
2500 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2502 for ac_dir in $ac_dummy; do
2503 test -z "$ac_dir" && ac_dir=.
2504 if test -f $ac_dir/$ac_word; then
2505 ac_cv_prog_STRIP="strip"
2510 test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
2513 STRIP="$ac_cv_prog_STRIP"
2514 if test -n "$STRIP"; then
2515 echo "$ac_t""$STRIP" 1>&6
2517 echo "$ac_t""no" 1>&6
2529 # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
2530 if test "${enable_libtool_lock+set}" = set; then
2531 enableval="$enable_libtool_lock"
2535 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
2537 # Some flags need to be propagated to the compiler or linker for good
2541 # Find out which ABI we are using.
2542 echo '#line 2543 "configure"' > conftest.$ac_ext
2543 if { (eval echo configure:2544: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2544 case `/usr/bin/file conftest.$ac_objext` in
2560 # On SCO OpenServer 5, we need -belf to get full-featured binaries.
2561 SAVE_CFLAGS="$CFLAGS"
2562 CFLAGS="$CFLAGS -belf"
2563 echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
2564 echo "configure:2565: checking whether the C compiler needs -belf" >&5
2565 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
2566 echo $ac_n "(cached) $ac_c" 1>&6
2570 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
2571 ac_cpp='$CPP $CPPFLAGS'
2572 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
2573 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
2574 cross_compiling=$ac_cv_prog_cc_cross
2576 cat > conftest.$ac_ext <<EOF
2577 #line 2578 "configure"
2578 #include "confdefs.h"
2584 if { (eval echo configure:2585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
2586 lt_cv_cc_needs_belf=yes
2588 echo "configure: failed program was:" >&5
2589 cat conftest.$ac_ext >&5
2591 lt_cv_cc_needs_belf=no
2595 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
2596 ac_cpp='$CPP $CPPFLAGS'
2597 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
2598 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
2599 cross_compiling=$ac_cv_prog_cc_cross
2603 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
2604 if test x"$lt_cv_cc_needs_belf" != x"yes"; then
2605 # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
2606 CFLAGS="$SAVE_CFLAGS"
2613 # Sed substitution that helps us do robust quoting. It backslashifies
2614 # metacharacters that are still active within double-quoted strings.
2615 Xsed='sed -e s/^X//'
2616 sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
2618 # Same as above, but do not quote variable references.
2619 double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
2621 # Sed substitution to delay expansion of an escaped shell variable in a
2622 # double_quote_subst'ed string.
2623 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
2629 default_ofile=libtool
2630 can_build_shared=yes
2632 # All known linkers require a `.a' archive for static linking (except M$VC,
2633 # which needs '.lib').
2635 ltmain="$ac_aux_dir/ltmain.sh"
2636 ofile="$default_ofile"
2637 with_gnu_ld="$lt_cv_prog_gnu_ld"
2638 need_locks="$enable_libtool_lock"
2641 old_CFLAGS="$CFLAGS"
2643 # Set sane defaults for various variables
2644 test -z "$AR" && AR=ar
2645 test -z "$AR_FLAGS" && AR_FLAGS=cru
2646 test -z "$AS" && AS=as
2647 test -z "$CC" && CC=cc
2648 test -z "$DLLTOOL" && DLLTOOL=dlltool
2649 test -z "$LD" && LD=ld
2650 test -z "$LN_S" && LN_S="ln -s"
2651 test -z "$MAGIC_CMD" && MAGIC_CMD=file
2652 test -z "$NM" && NM=nm
2653 test -z "$OBJDUMP" && OBJDUMP=objdump
2654 test -z "$RANLIB" && RANLIB=:
2655 test -z "$STRIP" && STRIP=:
2656 test -z "$ac_objext" && ac_objext=o
2658 if test x"$host" != x"$build"; then
2659 ac_tool_prefix=${host_alias}-
2664 # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
2667 linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
2672 # AIX sometimes has problems with the GCC collect2 program. For some
2673 # reason, if we set the COLLECT_NAMES environment variable, the problems
2674 # vanish in a puff of smoke.
2675 if test "X${COLLECT_NAMES+set}" != Xset; then
2677 export COLLECT_NAMES
2682 # Determine commands to create old-style static archives.
2683 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
2684 old_postinstall_cmds='chmod 644 $oldlib'
2685 old_postuninstall_cmds=
2687 if test -n "$RANLIB"; then
2690 old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
2693 old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
2696 old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
2699 # Allow CC to be a program name with arguments.
2703 ## FIXME: this should be a separate macro
2705 echo $ac_n "checking for objdir""... $ac_c" 1>&6
2706 echo "configure:2707: checking for objdir" >&5
2707 rm -f .libs 2>/dev/null
2708 mkdir .libs 2>/dev/null
2709 if test -d .libs; then
2712 # MS-DOS does not allow filenames that begin with a dot.
2715 rmdir .libs 2>/dev/null
2716 echo "$ac_t""$objdir" 1>&6
2721 ## FIXME: this should be a separate macro
2723 # Check whether --with-pic or --without-pic was given.
2724 if test "${with_pic+set}" = set; then
2731 test -z "$pic_mode" && pic_mode=default
2733 # We assume here that the value for lt_cv_prog_cc_pic will not be cached
2734 # in isolation, and that seeing it set (from the cache) indicates that
2735 # the associated values are set (in the cache) correctly too.
2736 echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
2737 echo "configure:2738: checking for $compiler option to produce PIC" >&5
2738 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
2739 echo $ac_n "(cached) $ac_c" 1>&6
2742 lt_cv_prog_cc_shlib=
2744 lt_cv_prog_cc_static=
2745 lt_cv_prog_cc_no_builtin=
2746 lt_cv_prog_cc_can_build_shared=$can_build_shared
2748 if test "$GCC" = yes; then
2749 lt_cv_prog_cc_wl='-Wl,'
2750 lt_cv_prog_cc_static='-static'
2754 # Below there is a dirty hack to force normal static linking with -ldl
2755 # The problem is because libdl dynamically linked with both libc and
2756 # libC (AIX C++ library), which obviously doesn't included in libraries
2757 # list by gcc. This cause undefined symbols with -static flags.
2758 # This hack allows C programs to be linked with "-static -ldl", but
2759 # not sure about C++ programs.
2760 lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
2763 # FIXME: we need at least 68020 code to build shared libraries, but
2764 # adding the `-m68020' flag to GCC prevents building anything better,
2766 lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
2768 beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
2769 # PIC is the default for these OSes.
2771 darwin* | rhapsody*)
2772 # PIC is the default on this platform
2773 # Common symbols not allowed in MH_DYLIB files
2774 lt_cv_prog_cc_pic='-fno-common'
2776 cygwin* | mingw* | pw32* | os2*)
2777 # This hack is so that the source file can tell whether it is being
2778 # built for inclusion in a dll (and should export symbols for example).
2779 lt_cv_prog_cc_pic='-DDLL_EXPORT'
2782 if test -d /usr/nec; then
2783 lt_cv_prog_cc_pic=-Kconform_pic
2787 lt_cv_prog_cc_pic='-fPIC'
2791 # PORTME Check for PIC flags for the system compiler.
2793 aix3* | aix4* | aix5*)
2794 lt_cv_prog_cc_wl='-Wl,'
2795 # All AIX code is PIC.
2796 if test "$host_cpu" = ia64; then
2797 # AIX 5 now supports IA64 processor
2798 lt_cv_prog_cc_static='-Bstatic'
2800 lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
2804 hpux9* | hpux10* | hpux11*)
2805 # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
2806 lt_cv_prog_cc_wl='-Wl,'
2807 lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
2808 lt_cv_prog_cc_pic='+Z'
2812 lt_cv_prog_cc_wl='-Wl,'
2813 lt_cv_prog_cc_static='-non_shared'
2814 # PIC (with -KPIC) is the default.
2817 cygwin* | mingw* | pw32* | os2*)
2818 # This hack is so that the source file can tell whether it is being
2819 # built for inclusion in a dll (and should export symbols for example).
2820 lt_cv_prog_cc_pic='-DDLL_EXPORT'
2824 lt_cv_prog_cc_pic='-KPIC'
2825 lt_cv_prog_cc_static='-Bstatic'
2828 osf3* | osf4* | osf5*)
2829 # All OSF/1 code is PIC.
2830 lt_cv_prog_cc_wl='-Wl,'
2831 lt_cv_prog_cc_static='-non_shared'
2835 lt_cv_prog_cc_pic='-Kpic'
2836 lt_cv_prog_cc_static='-dn'
2837 lt_cv_prog_cc_shlib='-belf'
2841 lt_cv_prog_cc_pic='-KPIC'
2842 lt_cv_prog_cc_static='-Bstatic'
2843 lt_cv_prog_cc_wl='-Wl,'
2847 lt_cv_prog_cc_pic='-PIC'
2848 lt_cv_prog_cc_static='-Bstatic'
2849 lt_cv_prog_cc_wl='-Qoption ld '
2852 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
2853 lt_cv_prog_cc_pic='-KPIC'
2854 lt_cv_prog_cc_static='-Bstatic'
2855 if test "x$host_vendor" = xsni; then
2856 lt_cv_prog_cc_wl='-LD'
2858 lt_cv_prog_cc_wl='-Wl,'
2863 lt_cv_prog_cc_pic='-pic'
2864 lt_cv_prog_cc_static='-Bstatic'
2868 if test -d /usr/nec ;then
2869 lt_cv_prog_cc_pic='-Kconform_pic'
2870 lt_cv_prog_cc_static='-Bstatic'
2875 lt_cv_prog_cc_can_build_shared=no
2882 if test -z "$lt_cv_prog_cc_pic"; then
2883 echo "$ac_t""none" 1>&6
2885 echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
2887 # Check to make sure the pic_flag actually works.
2888 echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
2889 echo "configure:2890: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
2890 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
2891 echo $ac_n "(cached) $ac_c" 1>&6
2893 save_CFLAGS="$CFLAGS"
2894 CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
2895 cat > conftest.$ac_ext <<EOF
2896 #line 2897 "configure"
2897 #include "confdefs.h"
2903 if { (eval echo configure:2904: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2906 hpux9* | hpux10* | hpux11*)
2907 # On HP-UX, both CC and GCC only warn that PIC is supported... then
2908 # they create non-PIC objects. So, if there were any warnings, we
2909 # assume that PIC is not supported.
2910 if test -s conftest.err; then
2911 lt_cv_prog_cc_pic_works=no
2913 lt_cv_prog_cc_pic_works=yes
2917 lt_cv_prog_cc_pic_works=yes
2922 echo "configure: failed program was:" >&5
2923 cat conftest.$ac_ext >&5
2925 lt_cv_prog_cc_pic_works=no
2929 CFLAGS="$save_CFLAGS"
2934 if test "X$lt_cv_prog_cc_pic_works" = Xno; then
2936 lt_cv_prog_cc_can_build_shared=no
2938 lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
2941 echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
2946 # Check for any special shared library compilation flags.
2947 if test -n "$lt_cv_prog_cc_shlib"; then
2948 echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
2949 if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
2951 echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
2952 lt_cv_prog_cc_can_build_shared=no
2956 ## FIXME: this should be a separate macro
2958 echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
2959 echo "configure:2960: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
2960 if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
2961 echo $ac_n "(cached) $ac_c" 1>&6
2963 lt_cv_prog_cc_static_works=no
2964 save_LDFLAGS="$LDFLAGS"
2965 LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
2966 cat > conftest.$ac_ext <<EOF
2967 #line 2968 "configure"
2968 #include "confdefs.h"
2974 if { (eval echo configure:2975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
2976 lt_cv_prog_cc_static_works=yes
2978 echo "configure: failed program was:" >&5
2979 cat conftest.$ac_ext >&5
2982 LDFLAGS="$save_LDFLAGS"
2987 # Belt *and* braces to stop my trousers falling down:
2988 test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
2989 echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
2991 pic_flag="$lt_cv_prog_cc_pic"
2992 special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
2993 wl="$lt_cv_prog_cc_wl"
2994 link_static_flag="$lt_cv_prog_cc_static"
2995 no_builtin_flag="$lt_cv_prog_cc_no_builtin"
2996 can_build_shared="$lt_cv_prog_cc_can_build_shared"
3001 ## FIXME: this should be a separate macro
3003 # Check to see if options -o and -c are simultaneously supported by compiler
3004 echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
3005 echo "configure:3006: checking if $compiler supports -c -o file.$ac_objext" >&5
3006 if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
3007 echo $ac_n "(cached) $ac_c" 1>&6
3010 $rm -r conftest 2>/dev/null
3013 echo "int some_variable = 0;" > conftest.$ac_ext
3015 # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
3016 # that will create temporary files in the current directory regardless of
3017 # the output directory. Thus, making CWD read-only will cause this test
3018 # to fail, enabling locking or at least warning the user not to do parallel
3021 save_CFLAGS="$CFLAGS"
3022 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
3024 if { (eval echo configure:3025: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
3025 # The compiler can only warn and ignore the option if not recognized
3026 # So say no if there are warnings
3027 if test -s out/conftest.err; then
3028 lt_cv_compiler_c_o=no
3030 lt_cv_compiler_c_o=yes
3033 # Append any errors to the config.log.
3034 cat out/conftest.err 1>&5
3035 lt_cv_compiler_c_o=no
3037 CFLAGS="$save_CFLAGS"
3043 $rm -r conftest 2>/dev/null
3047 compiler_c_o=$lt_cv_compiler_c_o
3048 echo "$ac_t""$compiler_c_o" 1>&6
3050 if test x"$compiler_c_o" = x"yes"; then
3051 # Check to see if we can write to a .lo
3052 echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
3053 echo "configure:3054: checking if $compiler supports -c -o file.lo" >&5
3054 if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
3055 echo $ac_n "(cached) $ac_c" 1>&6
3058 lt_cv_compiler_o_lo=no
3059 save_CFLAGS="$CFLAGS"
3060 CFLAGS="$CFLAGS -c -o conftest.lo"
3061 save_objext="$ac_objext"
3063 cat > conftest.$ac_ext <<EOF
3064 #line 3065 "configure"
3065 #include "confdefs.h"
3068 int some_variable = 0;
3071 if { (eval echo configure:3072: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
3073 # The compiler can only warn and ignore the option if not recognized
3074 # So say no if there are warnings
3075 if test -s conftest.err; then
3076 lt_cv_compiler_o_lo=no
3078 lt_cv_compiler_o_lo=yes
3082 echo "configure: failed program was:" >&5
3083 cat conftest.$ac_ext >&5
3086 ac_objext="$save_objext"
3087 CFLAGS="$save_CFLAGS"
3091 compiler_o_lo=$lt_cv_compiler_o_lo
3092 echo "$ac_t""$compiler_o_lo" 1>&6
3099 ## FIXME: this should be a separate macro
3101 # Check to see if we can do hard links to lock some files if needed
3102 hard_links="nottested"
3103 if test "$compiler_c_o" = no && test "$need_locks" != no; then
3104 # do not overwrite the value of need_locks provided by the user
3105 echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
3106 echo "configure:3107: checking if we can lock with hard links" >&5
3109 ln conftest.a conftest.b 2>/dev/null && hard_links=no
3111 ln conftest.a conftest.b 2>&5 || hard_links=no
3112 ln conftest.a conftest.b 2>/dev/null && hard_links=no
3113 echo "$ac_t""$hard_links" 1>&6
3114 if test "$hard_links" = no; then
3115 echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
3124 ## FIXME: this should be a separate macro
3126 if test "$GCC" = yes; then
3127 # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
3128 echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
3129 echo "configure:3130: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
3130 echo "int some_variable = 0;" > conftest.$ac_ext
3131 save_CFLAGS="$CFLAGS"
3132 CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
3133 compiler_rtti_exceptions=no
3134 cat > conftest.$ac_ext <<EOF
3135 #line 3136 "configure"
3136 #include "confdefs.h"
3139 int some_variable = 0;
3142 if { (eval echo configure:3143: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
3144 # The compiler can only warn and ignore the option if not recognized
3145 # So say no if there are warnings
3146 if test -s conftest.err; then
3147 compiler_rtti_exceptions=no
3149 compiler_rtti_exceptions=yes
3153 echo "configure: failed program was:" >&5
3154 cat conftest.$ac_ext >&5
3157 CFLAGS="$save_CFLAGS"
3158 echo "$ac_t""$compiler_rtti_exceptions" 1>&6
3160 if test "$compiler_rtti_exceptions" = "yes"; then
3161 no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
3163 no_builtin_flag=' -fno-builtin'
3169 ## FIXME: this should be a separate macro
3171 # See if the linker supports building shared libraries.
3172 echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
3173 echo "configure:3174: checking whether the linker ($LD) supports shared libraries" >&5
3175 allow_undefined_flag=
3177 need_lib_prefix=unknown
3178 need_version=unknown
3179 # when you set need_version to no, make sure it does not cause -set_version
3180 # flags to be left without arguments
3182 archive_expsym_cmds=
3183 old_archive_from_new_cmds=
3184 old_archive_from_expsyms_cmds=
3185 export_dynamic_flag_spec=
3186 whole_archive_flag_spec=
3187 thread_safe_flag_spec=
3188 hardcode_into_libs=no
3189 hardcode_libdir_flag_spec=
3190 hardcode_libdir_separator=
3193 hardcode_shlibpath_var=unsupported
3195 link_all_deplibs=unknown
3196 always_export_symbols=no
3197 export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
3198 # include_expsyms should be a list of space-separated symbols to be *always*
3199 # included in the symbol list
3201 # exclude_expsyms can be an egrep regular expression of symbols to exclude
3202 # it will be wrapped by ` (' and `)$', so one must not match beginning or
3203 # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
3204 # as well as any symbol that contains `d'.
3205 exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
3206 # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
3207 # platforms (ab)use it in PIC code, but their linkers get confused if
3208 # the symbol is explicitly referenced. Since portable code cannot
3209 # rely on this symbol name, it's probably fine to never include it in
3210 # preloaded symbol tables.
3211 extract_expsyms_cmds=
3214 cygwin* | mingw* | pw32*)
3215 # FIXME: the MSVC++ port hasn't been tested in a loooong time
3216 # When not using gcc, we currently assume that we are using
3217 # Microsoft Visual C++.
3218 if test "$GCC" != yes; then
3228 if test "$with_gnu_ld" = yes; then
3229 # If archive_cmds runs LD, not CC, wlarc should be empty
3232 # See if GNU ld supports shared libraries.
3234 aix3* | aix4* | aix5*)
3235 # On AIX, the GNU linker is very broken
3236 # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
3240 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
3241 *** to be unable to reliably create shared libraries on AIX.
3242 *** Therefore, libtool is disabling shared libraries support. If you
3243 *** really care for shared libraries, you may want to modify your PATH
3244 *** so that a non-GNU linker is found, and then restart.
3250 archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
3251 hardcode_libdir_flag_spec='-L$libdir'
3252 hardcode_minus_L=yes
3254 # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
3255 # that the semantics of dynamic libraries on AmigaOS, at least up
3256 # to version 4, is to share data among multiple programs linked
3257 # with the same dynamic library. Since this doesn't match the
3258 # behavior of shared libraries on other platforms, we can use
3264 if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
3265 allow_undefined_flag=unsupported
3266 # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
3267 # support --undefined. This deserves some investigation. FIXME
3268 archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3274 cygwin* | mingw* | pw32*)
3275 # hardcode_libdir_flag_spec is actually meaningless, as there is
3276 # no search path for DLLs.
3277 hardcode_libdir_flag_spec='-L$libdir'
3278 allow_undefined_flag=unsupported
3279 always_export_symbols=yes
3281 extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
3282 sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
3283 test -f $output_objdir/impgen.exe || (cd $output_objdir && \
3284 if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
3285 else $CC -o impgen impgen.c ; fi)~
3286 $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
3288 old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
3290 # cygwin and mingw dlls have different entry points and sets of symbols
3292 # FIXME: what about values for MSVC?
3293 dll_entry=__cygwin_dll_entry@12
3294 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
3298 dll_entry=_DllMainCRTStartup@12
3299 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
3303 # mingw and cygwin differ, and it's simplest to just exclude the union
3304 # of the two symbol sets.
3305 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
3307 # recent cygwin and mingw systems supply a stub DllMain which the user
3308 # can override, but on older systems we have to supply one (in ltdll.c)
3309 if test "x$lt_cv_need_dllmain" = "xyes"; then
3310 ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
3311 ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
3312 test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
3318 # Extract the symbol export list from an `--export-all' def file,
3319 # then regenerate the def file from the symbol export list, so that
3320 # the compiled dll only exports the symbol export list.
3321 # Be careful not to strip the DATA tag left be newer dlltools.
3322 export_symbols_cmds="$ltdll_cmds"'
3323 $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
3324 sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
3326 # If the export-symbols file already is a .def file (1st line
3327 # is EXPORTS), use it as is.
3328 # If DATA tags from a recent dlltool are present, honour them!
3329 archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
3330 cp $export_symbols $output_objdir/$soname-def;
3332 echo EXPORTS > $output_objdir/$soname-def;
3334 cat $export_symbols | while read symbol; do
3337 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
3338 *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
3340 _lt_hint=`expr 1 + \$_lt_hint`;
3344 $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
3345 $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
3346 $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
3347 $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
3348 $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
3352 if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
3353 archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
3356 archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3357 archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
3362 if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
3366 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
3367 *** create shared libraries on Solaris systems. Therefore, libtool
3368 *** is disabling shared libraries support. We urge you to upgrade GNU
3369 *** binutils to release 2.9.1 or newer. Another option is to modify
3370 *** your PATH or compiler configuration so that the native linker is
3371 *** used, and then restart.
3374 elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
3375 archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3376 archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
3383 archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
3386 hardcode_shlibpath_var=no
3390 if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
3391 archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3392 archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
3399 if test "$ld_shlibs" = yes; then
3400 runpath_var=LD_RUN_PATH
3401 hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
3402 export_dynamic_flag_spec='${wl}--export-dynamic'
3404 cygwin* | mingw* | pw32*)
3405 # dlltool doesn't understand --whole-archive et. al.
3406 whole_archive_flag_spec=
3409 # ancient GNU ld didn't support --whole-archive et. al.
3410 if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
3411 whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
3413 whole_archive_flag_spec=
3419 # PORTME fill in a description of your system's linker (not GNU ld)
3422 allow_undefined_flag=unsupported
3423 always_export_symbols=yes
3424 archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
3425 # Note: this linker hardcodes the directories in LIBPATH if there
3426 # are no directories specified by -L.
3427 hardcode_minus_L=yes
3428 if test "$GCC" = yes && test -z "$link_static_flag"; then
3429 # Neither direct hardcoding nor static linking is supported with a
3431 hardcode_direct=unsupported
3436 if test "$host_cpu" = ia64; then
3437 # On IA64, the linker does run time linking by default, so we don't
3438 # have to do anything special.
3439 aix_use_runtimelinking=no
3440 exp_sym_flag='-Bexport'
3443 aix_use_runtimelinking=no
3445 # Test if we are trying to use run time linking or normal
3446 # AIX style linking. If -brtl is somewhere in LDFLAGS, we
3447 # need to do runtime linking.
3448 case $host_os in aix4.[23]|aix4.[23].*|aix5*)
3449 for ld_flag in $LDFLAGS; do
3450 if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
3451 aix_use_runtimelinking=yes
3457 exp_sym_flag='-bexport'
3458 no_entry_flag='-bnoentry'
3461 # When large executables or shared objects are built, AIX ld can
3462 # have problems creating the table of contents. If linking a library
3463 # or program results in "error TOC overflow" add -mminimal-toc to
3464 # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
3465 # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
3469 hardcode_libdir_separator=':'
3470 if test "$GCC" = yes; then
3471 case $host_os in aix4.[012]|aix4.[012].*)
3472 collect2name=`${CC} -print-prog-name=collect2`
3473 if test -f "$collect2name" && \
3474 strings "$collect2name" | grep resolve_lib_name >/dev/null
3476 # We have reworked collect2
3479 # We have old collect2
3480 hardcode_direct=unsupported
3481 # It fails to find uninstalled libraries when the uninstalled
3482 # path is not listed in the libpath. Setting hardcode_minus_L
3483 # to unsupported forces relinking
3484 hardcode_minus_L=yes
3485 hardcode_libdir_flag_spec='-L$libdir'
3486 hardcode_libdir_separator=
3490 shared_flag='-shared'
3493 if test "$host_cpu" = ia64; then
3494 shared_flag='${wl}-G'
3496 if test "$aix_use_runtimelinking" = yes; then
3497 shared_flag='${wl}-G'
3499 shared_flag='${wl}-bM:SRE'
3504 # It seems that -bexpall can do strange things, so it is better to
3505 # generate a list of symbols to export.
3506 always_export_symbols=yes
3507 if test "$aix_use_runtimelinking" = yes; then
3508 # Warning - without using the other runtime loading flags (-brtl),
3509 # -berok will link without error, but may produce a broken library.
3510 allow_undefined_flag='-berok'
3511 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
3512 archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
3514 if test "$host_cpu" = ia64; then
3515 hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
3516 allow_undefined_flag="-z nodefs"
3517 archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
3519 hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
3520 # Warning - without using the other run time loading flags,
3521 # -berok will link without error, but may produce a broken library.
3522 allow_undefined_flag='${wl}-berok'
3523 # This is a bit strange, but is similar to how AIX traditionally builds
3524 # it's shared libraries.
3525 archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
3531 archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
3532 hardcode_libdir_flag_spec='-L$libdir'
3533 hardcode_minus_L=yes
3534 # see comment about different semantics on the GNU ld section
3538 cygwin* | mingw* | pw32*)
3539 # When not using gcc, we currently assume that we are using
3540 # Microsoft Visual C++.
3541 # hardcode_libdir_flag_spec is actually meaningless, as there is
3542 # no search path for DLLs.
3543 hardcode_libdir_flag_spec=' '
3544 allow_undefined_flag=unsupported
3545 # Tell ltmain to make .lib files, not .a files.
3547 # FIXME: Setting linknames here is a bad hack.
3548 archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
3549 # The linker will automatically build a .lib file if we build a DLL.
3550 old_archive_from_new_cmds='true'
3551 # FIXME: Should let the user specify the lib program.
3552 old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
3553 fix_srcfile_path='`cygpath -w "$srcfile"`'
3556 darwin* | rhapsody*)
3558 rhapsody* | darwin1.[012])
3559 allow_undefined_flag='-undefined suppress'
3562 allow_undefined_flag='-flat_namespace -undefined suppress'
3565 # FIXME: Relying on posixy $() will cause problems for
3566 # cross-compilation, but unfortunately the echo tests do not
3567 # yet detect zsh echo's removal of \ escapes.
3568 archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
3569 # We need to add '_' to the symbols in $export_symbols first
3570 #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
3572 hardcode_shlibpath_var=no
3573 whole_archive_flag_spec='-all_load $convenience'
3580 # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
3581 # support. Future versions do this automatically, but an explicit c++rt0.o
3582 # does not break anything, and helps significantly (at the cost of a little
3585 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
3586 hardcode_libdir_flag_spec='-R$libdir'
3588 hardcode_shlibpath_var=no
3591 # Unfortunately, older versions of FreeBSD 2 do not have this feature.
3593 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
3595 hardcode_minus_L=yes
3596 hardcode_shlibpath_var=no
3599 # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
3601 archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
3602 hardcode_libdir_flag_spec='-R$libdir'
3604 hardcode_shlibpath_var=no
3607 hpux9* | hpux10* | hpux11*)
3609 hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
3610 *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
3612 hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
3613 hardcode_libdir_separator=:
3615 hardcode_minus_L=yes # Not in the search PATH, but as the default
3616 # location of the library.
3617 export_dynamic_flag_spec='${wl}-E'
3621 if test "$GCC" = yes; then
3622 archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
3624 archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
3626 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3627 hardcode_libdir_separator=:
3628 link_all_deplibs=yes
3632 if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
3633 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
3635 archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
3637 hardcode_libdir_flag_spec='-R$libdir'
3639 hardcode_shlibpath_var=no
3643 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3645 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3646 hardcode_libdir_separator=:
3647 hardcode_shlibpath_var=no
3652 hardcode_shlibpath_var=no
3653 if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
3654 archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
3655 hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
3656 export_dynamic_flag_spec='${wl}-E'
3659 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
3660 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
3661 hardcode_libdir_flag_spec='-R$libdir'
3664 archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
3665 hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
3672 hardcode_libdir_flag_spec='-L$libdir'
3673 hardcode_minus_L=yes
3674 allow_undefined_flag=unsupported
3675 archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
3676 old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
3680 if test "$GCC" = yes; then
3681 allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
3682 archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
3684 allow_undefined_flag=' -expect_unresolved \*'
3685 archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
3687 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3688 hardcode_libdir_separator=:
3691 osf4* | osf5*) # as osf3* with the addition of -msym flag
3692 if test "$GCC" = yes; then
3693 allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
3694 archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
3695 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3697 allow_undefined_flag=' -expect_unresolved \*'
3698 archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
3699 archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
3700 $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
3702 #Both c and cxx compiler support -rpath directly
3703 hardcode_libdir_flag_spec='-rpath $libdir'
3705 hardcode_libdir_separator=:
3709 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3710 hardcode_shlibpath_var=no
3711 runpath_var=LD_RUN_PATH
3712 hardcode_runpath_var=yes
3713 export_dynamic_flag_spec='${wl}-Bexport'
3717 # gcc --version < 3.0 without binutils cannot create self contained
3718 # shared libraries reliably, requiring libgcc.a to resolve some of
3719 # the object symbols generated in some cases. Libraries that use
3720 # assert need libgcc.a to resolve __eprintf, for example. Linking
3721 # a copy of libgcc.a into every shared library to guarantee resolving
3722 # such symbols causes other problems: According to Tim Van Holder
3723 # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
3724 # (to the application) exception stack for one thing.
3725 no_undefined_flag=' -z defs'
3726 if test "$GCC" = yes; then
3727 case `$CC --version 2>/dev/null` in
3731 *** Warning: Releases of GCC earlier than version 3.0 cannot reliably
3732 *** create self contained shared libraries on Solaris systems, without
3733 *** introducing a dependency on libgcc.a. Therefore, libtool is disabling
3734 *** -no-undefined support, which will at least allow you to build shared
3735 *** libraries. However, you may find that when you link such libraries
3736 *** into an application without using GCC, you have to manually add
3737 *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
3738 *** upgrade to a newer version of GCC. Another option is to rebuild your
3739 *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
3746 # $CC -shared without GNU ld will not create a library from C++
3747 # object files and a static libstdc++, better avoid it by now
3748 archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
3749 archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
3750 $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
3751 hardcode_libdir_flag_spec='-R$libdir'
3752 hardcode_shlibpath_var=no
3754 solaris2.[0-5] | solaris2.[0-5].*) ;;
3755 *) # Supported since Solaris 2.6 (maybe 2.5.1?)
3756 whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
3758 link_all_deplibs=yes
3762 if test "x$host_vendor" = xsequent; then
3763 # Use $CC to link under sequent, because it throws in some extra .o
3764 # files that make .init and .fini sections work.
3765 archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
3767 archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
3769 hardcode_libdir_flag_spec='-L$libdir'
3771 hardcode_minus_L=yes
3772 hardcode_shlibpath_var=no
3776 if test "x$host_vendor" = xsno; then
3777 archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
3778 hardcode_direct=yes # is this really true???
3780 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3781 hardcode_direct=no #Motorola manual says yes, but my tests say they lie
3783 runpath_var='LD_RUN_PATH'
3784 hardcode_shlibpath_var=no
3788 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3789 hardcode_shlibpath_var=no
3790 export_dynamic_flag_spec='-Bexport'
3794 no_undefined_flag=' -z text'
3795 # $CC -shared without GNU ld will not create a library from C++
3796 # object files and a static libstdc++, better avoid it by now
3797 archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
3798 archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
3799 $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
3800 hardcode_libdir_flag_spec=
3801 hardcode_shlibpath_var=no
3802 runpath_var='LD_RUN_PATH'
3806 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3807 hardcode_libdir_flag_spec='-L$libdir'
3808 hardcode_shlibpath_var=no
3812 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3813 hardcode_libdir_flag_spec='-L$libdir'
3814 hardcode_shlibpath_var=no
3818 if test -d /usr/nec; then
3819 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3820 hardcode_shlibpath_var=no
3821 runpath_var=LD_RUN_PATH
3822 hardcode_runpath_var=yes
3828 archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
3831 hardcode_shlibpath_var=no
3832 hardcode_runpath_var=yes
3833 runpath_var=LD_RUN_PATH
3836 sysv5uw7* | unixware7*)
3837 no_undefined_flag='${wl}-z ${wl}text'
3838 if test "$GCC" = yes; then
3839 archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
3841 archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
3843 runpath_var='LD_RUN_PATH'
3844 hardcode_shlibpath_var=no
3852 echo "$ac_t""$ld_shlibs" 1>&6
3853 test "$ld_shlibs" = no && can_build_shared=no
3857 ## FIXME: this should be a separate macro
3859 # Check hardcoding attributes.
3860 echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
3861 echo "configure:3862: checking how to hardcode library paths into programs" >&5
3863 if test -n "$hardcode_libdir_flag_spec" || \
3864 test -n "$runpath_var"; then
3866 # We can hardcode non-existant directories.
3867 if test "$hardcode_direct" != no &&
3868 # If the only mechanism to avoid hardcoding is shlibpath_var, we
3869 # have to relink, otherwise we might link with an installed library
3870 # when we should be linking with a yet-to-be-installed one
3871 ## test "$hardcode_shlibpath_var" != no &&
3872 test "$hardcode_minus_L" != no; then
3873 # Linking always hardcodes the temporary library directory.
3874 hardcode_action=relink
3876 # We can link without hardcoding, and we can hardcode nonexisting dirs.
3877 hardcode_action=immediate
3880 # We cannot hardcode anything, or else we can only hardcode existing
3882 hardcode_action=unsupported
3884 echo "$ac_t""$hardcode_action" 1>&6
3888 ## FIXME: this should be a separate macro
3892 echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
3893 echo "configure:3894: checking whether stripping libraries is possible" >&5
3894 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
3895 test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
3896 test -z "$striplib" && striplib="$STRIP --strip-unneeded"
3897 echo "$ac_t""yes" 1>&6
3899 echo "$ac_t""no" 1>&6
3904 reload_cmds='$LD$reload_flag -o $output$reload_objs'
3905 test -z "$deplibs_check_method" && deplibs_check_method=unknown
3907 ## FIXME: this should be a separate macro
3909 # PORTME Fill in your ld.so characteristics
3910 echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
3911 echo "configure:3912: checking dynamic linker characteristics" >&5
3913 libname_spec='lib$name'
3920 shlibpath_overrides_runpath=unknown
3922 dynamic_linker="$host_os ld.so"
3923 sys_lib_dlsearch_path_spec="/lib /usr/lib"
3924 sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
3929 library_names_spec='${libname}${release}.so$versuffix $libname.a'
3930 shlibpath_var=LIBPATH
3932 # AIX has no versioning support, so we append a major version to the name.
3933 soname_spec='${libname}${release}.so$major'
3938 if test "$host_cpu" = ia64; then
3939 # AIX 5 supports IA64
3940 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
3941 shlibpath_var=LD_LIBRARY_PATH
3943 # With GCC up to 2.95.x, collect2 would create an import file
3944 # for dependence libraries. The import file would start with
3945 # the line `#! .'. This would cause the generated library to
3946 # depend on `.', always an invalid library. This was fixed in
3947 # development snapshots of GCC prior to 3.0.
3949 aix4 | aix4.[01] | aix4.[01].*)
3950 if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
3952 echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
3959 # AIX (on Power*) has no versioning support, so currently we can
3960 # not hardcode correct soname into executable. Probably we can
3961 # add versioning support to collect2, so additional links can
3962 # be useful in future.
3963 if test "$aix_use_runtimelinking" = yes; then
3964 # If using run time linking (on AIX 4.2 or later) use lib<name>.so
3965 # instead of lib<name>.a to let people know that these are not
3966 # typical AIX shared libraries.
3967 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
3969 # We preserve .a as extension for shared libraries through AIX4.2
3970 # and later when we are not doing run time linking.
3971 library_names_spec='${libname}${release}.a $libname.a'
3972 soname_spec='${libname}${release}.so$major'
3974 shlibpath_var=LIBPATH
3979 library_names_spec='$libname.ixlibrary $libname.a'
3980 # Create ${libname}_ixlibrary.a entries in /sys/libs.
3981 finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
3985 library_names_spec='${libname}.so'
3986 dynamic_linker="$host_os ld.so"
3987 shlibpath_var=LIBRARY_PATH
3993 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
3994 soname_spec='${libname}${release}.so$major'
3995 finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
3996 shlibpath_var=LD_LIBRARY_PATH
3997 sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
3998 sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
3999 export_dynamic_flag_spec=-rdynamic
4000 # the default ld.so.conf also contains /usr/contrib/lib and
4001 # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
4002 # libtool to hard-code these into programs
4005 cygwin* | mingw* | pw32*)
4006 version_type=windows
4009 case $GCC,$host_os in
4011 library_names_spec='$libname.dll.a'
4012 soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
4013 postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
4014 dldir=$destdir/`dirname \$dlpath`~
4015 test -d \$dldir || mkdir -p \$dldir~
4016 $install_prog .libs/$dlname \$dldir/$dlname'
4017 postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
4018 dlpath=$dir/\$dldll~
4022 library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
4023 sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
4026 library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
4029 library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
4032 dynamic_linker='Win32 ld.exe'
4033 # FIXME: first we should search . and the directory the executable is in
4037 darwin* | rhapsody*)
4038 dynamic_linker="$host_os dyld"
4042 # FIXME: Relying on posixy $() will cause problems for
4043 # cross-compilation, but unfortunately the echo tests do not
4044 # yet detect zsh echo's removal of \ escapes.
4045 library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
4046 soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
4047 shlibpath_overrides_runpath=yes
4048 shlibpath_var=DYLD_LIBRARY_PATH
4056 objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
4057 version_type=freebsd-$objformat
4058 case $version_type in
4060 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
4065 library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
4069 shlibpath_var=LD_LIBRARY_PATH
4072 shlibpath_overrides_runpath=yes
4075 shlibpath_overrides_runpath=no
4076 hardcode_into_libs=yes
4085 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
4086 soname_spec='${libname}${release}.so$major'
4087 shlibpath_var=LD_LIBRARY_PATH
4088 hardcode_into_libs=yes
4091 hpux9* | hpux10* | hpux11*)
4092 # Give a soname corresponding to the major version so that dld.sl refuses to
4093 # link against other versions.
4094 dynamic_linker="$host_os dld.sl"
4098 shlibpath_var=SHLIB_PATH
4099 shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
4100 library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
4101 soname_spec='${libname}${release}.sl$major'
4102 # HP-UX runs *really* slowly unless shared libraries are mode 555.
4103 postinstall_cmds='chmod 555 $lib'
4110 soname_spec='${libname}${release}.so$major'
4111 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
4117 case $LD in # libtool.m4 will add one of these switches to LD
4118 *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
4119 *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
4120 *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
4121 *) libsuff= shlibsuff= libmagic=never-match;;
4125 shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
4126 shlibpath_overrides_runpath=no
4127 sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
4128 sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
4131 # No shared lib support for Linux oldld, aout, or coff.
4132 linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
4136 # This must be Linux ELF.
4141 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4142 soname_spec='${libname}${release}.so$major'
4143 finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
4144 shlibpath_var=LD_LIBRARY_PATH
4145 shlibpath_overrides_runpath=no
4146 # This implies no fast_install, which is unacceptable.
4147 # Some rework will be needed to allow for fast_install
4148 # before this can be enabled.
4149 hardcode_into_libs=yes
4151 # We used to test for /lib/ld.so.1 and disable shared libraries on
4152 # powerpc, because MkLinux only supported shared libraries with the
4153 # GNU dynamic linker. Since this was broken with cross compilers,
4154 # most powerpc-linux boxes support dynamic linking these days and
4155 # people can always --disable-shared, the test was removed, and we
4156 # assume the GNU/Linux dynamic linker is in use.
4157 dynamic_linker='GNU/Linux ld.so'
4164 if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
4165 library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
4166 finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
4167 dynamic_linker='NetBSD (a.out) ld.so'
4169 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
4170 soname_spec='${libname}${release}.so$major'
4171 dynamic_linker='NetBSD ld.elf_so'
4173 shlibpath_var=LD_LIBRARY_PATH
4174 shlibpath_overrides_runpath=yes
4175 hardcode_into_libs=yes
4180 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4181 shlibpath_var=LD_LIBRARY_PATH
4182 shlibpath_overrides_runpath=yes
4189 if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
4191 openbsd2.[89] | openbsd2.[89].*)
4192 shlibpath_overrides_runpath=no
4195 shlibpath_overrides_runpath=yes
4199 shlibpath_overrides_runpath=yes
4201 library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
4202 finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
4203 shlibpath_var=LD_LIBRARY_PATH
4207 libname_spec='$name'
4209 library_names_spec='$libname.dll $libname.a'
4210 dynamic_linker='OS/2 ld.exe'
4211 shlibpath_var=LIBPATH
4214 osf3* | osf4* | osf5*)
4217 soname_spec='${libname}${release}.so'
4218 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
4219 shlibpath_var=LD_LIBRARY_PATH
4220 sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
4221 sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
4226 soname_spec='${libname}${release}.so$major'
4227 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4228 shlibpath_var=LD_LIBRARY_PATH
4235 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4236 soname_spec='${libname}${release}.so$major'
4237 shlibpath_var=LD_LIBRARY_PATH
4238 shlibpath_overrides_runpath=yes
4239 hardcode_into_libs=yes
4240 # ldd complains unless libraries are executable
4241 postinstall_cmds='chmod +x $lib'
4246 library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
4247 finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
4248 shlibpath_var=LD_LIBRARY_PATH
4249 shlibpath_overrides_runpath=yes
4250 if test "$with_gnu_ld" = yes; then
4256 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
4258 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4259 soname_spec='${libname}${release}.so$major'
4260 shlibpath_var=LD_LIBRARY_PATH
4261 case $host_vendor in
4263 shlibpath_overrides_runpath=no
4268 shlibpath_overrides_runpath=no
4269 sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
4276 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4277 soname_spec='${libname}${release}.so$major'
4278 shlibpath_var=LD_LIBRARY_PATH
4285 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4286 soname_spec='${libname}${release}.so$major'
4287 shlibpath_var=LD_LIBRARY_PATH
4291 if test -d /usr/nec ;then
4293 library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
4294 soname_spec='$libname.so.$major'
4295 shlibpath_var=LD_LIBRARY_PATH
4303 echo "$ac_t""$dynamic_linker" 1>&6
4304 test "$dynamic_linker" = no && can_build_shared=no
4308 ## FIXME: this should be a separate macro
4310 # Report the final consequences.
4311 echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
4312 echo "configure:4313: checking if libtool supports shared libraries" >&5
4313 echo "$ac_t""$can_build_shared" 1>&6
4317 ## FIXME: this should be a separate macro
4319 echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
4320 echo "configure:4321: checking whether to build shared libraries" >&5
4321 test "$can_build_shared" = "no" && enable_shared=no
4323 # On AIX, shared libraries and static libraries use the same namespace, and
4324 # are all built from PIC.
4327 test "$enable_shared" = yes && enable_static=no
4328 if test -n "$RANLIB"; then
4329 archive_cmds="$archive_cmds~\$RANLIB \$lib"
4330 postinstall_cmds='$RANLIB $lib'
4335 if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
4336 test "$enable_shared" = yes && enable_static=no
4340 echo "$ac_t""$enable_shared" 1>&6
4344 ## FIXME: this should be a separate macro
4346 echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
4347 echo "configure:4348: checking whether to build static libraries" >&5
4348 # Make sure either enable_shared or enable_static is yes.
4349 test "$enable_shared" = yes || enable_static=yes
4350 echo "$ac_t""$enable_static" 1>&6
4354 if test "$hardcode_action" = relink; then
4355 # Fast installation is not supported
4356 enable_fast_install=no
4357 elif test "$shlibpath_overrides_runpath" = yes ||
4358 test "$enable_shared" = no; then
4359 # Fast installation is not necessary
4360 enable_fast_install=needless
4363 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
4364 if test "$GCC" = yes; then
4365 variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
4368 if test "x$enable_dlopen" != xyes; then
4369 enable_dlopen=unknown
4370 enable_dlopen_self=unknown
4371 enable_dlopen_self_static=unknown
4378 lt_cv_dlopen="load_add_on"
4380 lt_cv_dlopen_self=yes
4383 cygwin* | mingw* | pw32*)
4384 lt_cv_dlopen="LoadLibrary"
4389 echo $ac_n "checking for shl_load""... $ac_c" 1>&6
4390 echo "configure:4391: checking for shl_load" >&5
4391 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
4392 echo $ac_n "(cached) $ac_c" 1>&6
4394 cat > conftest.$ac_ext <<EOF
4395 #line 4396 "configure"
4396 #include "confdefs.h"
4397 /* System header to define __stub macros and hopefully few prototypes,
4398 which can conflict with char shl_load(); below. */
4400 /* Override any gcc2 internal prototype to avoid an error. */
4401 /* We use char because int might match the return type of a gcc2
4402 builtin and then its argument prototype would still apply. */
4407 /* The GNU C library defines this for functions which it implements
4408 to always fail with ENOSYS. Some functions are actually named
4409 something starting with __ and the normal name is an alias. */
4410 #if defined (__stub_shl_load) || defined (__stub___shl_load)
4418 if { (eval echo configure:4419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4420 eval "ac_cv_func_shl_load=yes"
4422 echo "configure: failed program was:" >&5
4423 cat conftest.$ac_ext >&5
4425 eval "ac_cv_func_shl_load=no"
4430 if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
4431 echo "$ac_t""yes" 1>&6
4432 lt_cv_dlopen="shl_load"
4434 echo "$ac_t""no" 1>&6
4435 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
4436 echo "configure:4437: checking for shl_load in -ldld" >&5
4437 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
4438 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4439 echo $ac_n "(cached) $ac_c" 1>&6
4441 ac_save_LIBS="$LIBS"
4443 cat > conftest.$ac_ext <<EOF
4444 #line 4445 "configure"
4445 #include "confdefs.h"
4446 /* Override any gcc2 internal prototype to avoid an error. */
4447 /* We use char because int might match the return type of a gcc2
4448 builtin and then its argument prototype would still apply. */
4455 if { (eval echo configure:4456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4457 eval "ac_cv_lib_$ac_lib_var=yes"
4459 echo "configure: failed program was:" >&5
4460 cat conftest.$ac_ext >&5
4462 eval "ac_cv_lib_$ac_lib_var=no"
4465 LIBS="$ac_save_LIBS"
4468 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4469 echo "$ac_t""yes" 1>&6
4470 lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
4472 echo "$ac_t""no" 1>&6
4473 echo $ac_n "checking for dlopen""... $ac_c" 1>&6
4474 echo "configure:4475: checking for dlopen" >&5
4475 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
4476 echo $ac_n "(cached) $ac_c" 1>&6
4478 cat > conftest.$ac_ext <<EOF
4479 #line 4480 "configure"
4480 #include "confdefs.h"
4481 /* System header to define __stub macros and hopefully few prototypes,
4482 which can conflict with char dlopen(); below. */
4484 /* Override any gcc2 internal prototype to avoid an error. */
4485 /* We use char because int might match the return type of a gcc2
4486 builtin and then its argument prototype would still apply. */
4491 /* The GNU C library defines this for functions which it implements
4492 to always fail with ENOSYS. Some functions are actually named
4493 something starting with __ and the normal name is an alias. */
4494 #if defined (__stub_dlopen) || defined (__stub___dlopen)
4502 if { (eval echo configure:4503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4504 eval "ac_cv_func_dlopen=yes"
4506 echo "configure: failed program was:" >&5
4507 cat conftest.$ac_ext >&5
4509 eval "ac_cv_func_dlopen=no"
4514 if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
4515 echo "$ac_t""yes" 1>&6
4516 lt_cv_dlopen="dlopen"
4518 echo "$ac_t""no" 1>&6
4519 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
4520 echo "configure:4521: checking for dlopen in -ldl" >&5
4521 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
4522 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4523 echo $ac_n "(cached) $ac_c" 1>&6
4525 ac_save_LIBS="$LIBS"
4527 cat > conftest.$ac_ext <<EOF
4528 #line 4529 "configure"
4529 #include "confdefs.h"
4530 /* Override any gcc2 internal prototype to avoid an error. */
4531 /* We use char because int might match the return type of a gcc2
4532 builtin and then its argument prototype would still apply. */
4539 if { (eval echo configure:4540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4541 eval "ac_cv_lib_$ac_lib_var=yes"
4543 echo "configure: failed program was:" >&5
4544 cat conftest.$ac_ext >&5
4546 eval "ac_cv_lib_$ac_lib_var=no"
4549 LIBS="$ac_save_LIBS"
4552 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4553 echo "$ac_t""yes" 1>&6
4554 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
4556 echo "$ac_t""no" 1>&6
4557 echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
4558 echo "configure:4559: checking for dlopen in -lsvld" >&5
4559 ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
4560 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4561 echo $ac_n "(cached) $ac_c" 1>&6
4563 ac_save_LIBS="$LIBS"
4565 cat > conftest.$ac_ext <<EOF
4566 #line 4567 "configure"
4567 #include "confdefs.h"
4568 /* Override any gcc2 internal prototype to avoid an error. */
4569 /* We use char because int might match the return type of a gcc2
4570 builtin and then its argument prototype would still apply. */
4577 if { (eval echo configure:4578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4579 eval "ac_cv_lib_$ac_lib_var=yes"
4581 echo "configure: failed program was:" >&5
4582 cat conftest.$ac_ext >&5
4584 eval "ac_cv_lib_$ac_lib_var=no"
4587 LIBS="$ac_save_LIBS"
4590 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4591 echo "$ac_t""yes" 1>&6
4592 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
4594 echo "$ac_t""no" 1>&6
4595 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
4596 echo "configure:4597: checking for dld_link in -ldld" >&5
4597 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
4598 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4599 echo $ac_n "(cached) $ac_c" 1>&6
4601 ac_save_LIBS="$LIBS"
4603 cat > conftest.$ac_ext <<EOF
4604 #line 4605 "configure"
4605 #include "confdefs.h"
4606 /* Override any gcc2 internal prototype to avoid an error. */
4607 /* We use char because int might match the return type of a gcc2
4608 builtin and then its argument prototype would still apply. */
4615 if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4617 eval "ac_cv_lib_$ac_lib_var=yes"
4619 echo "configure: failed program was:" >&5
4620 cat conftest.$ac_ext >&5
4622 eval "ac_cv_lib_$ac_lib_var=no"
4625 LIBS="$ac_save_LIBS"
4628 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4629 echo "$ac_t""yes" 1>&6
4630 lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
4632 echo "$ac_t""no" 1>&6
4653 if test "x$lt_cv_dlopen" != xno; then
4659 case $lt_cv_dlopen in
4661 save_CPPFLAGS="$CPPFLAGS"
4662 test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
4664 save_LDFLAGS="$LDFLAGS"
4665 eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
4668 LIBS="$lt_cv_dlopen_libs $LIBS"
4670 echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
4671 echo "configure:4672: checking whether a program can dlopen itself" >&5
4672 if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
4673 echo $ac_n "(cached) $ac_c" 1>&6
4675 if test "$cross_compiling" = yes; then :
4676 lt_cv_dlopen_self=cross
4678 lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
4679 lt_status=$lt_dlunknown
4680 cat > conftest.$ac_ext <<EOF
4681 #line 4682 "configure"
4682 #include "confdefs.h"
4691 # define LT_DLGLOBAL RTLD_GLOBAL
4694 # define LT_DLGLOBAL DL_GLOBAL
4696 # define LT_DLGLOBAL 0
4700 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
4701 find out it does not work in some platform. */
4702 #ifndef LT_DLLAZY_OR_NOW
4704 # define LT_DLLAZY_OR_NOW RTLD_LAZY
4707 # define LT_DLLAZY_OR_NOW DL_LAZY
4710 # define LT_DLLAZY_OR_NOW RTLD_NOW
4713 # define LT_DLLAZY_OR_NOW DL_NOW
4715 # define LT_DLLAZY_OR_NOW 0
4723 extern "C" void exit (int);
4726 void fnord() { int i=42;}
4729 void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
4730 int status = $lt_dlunknown;
4734 if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
4735 else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
4736 /* dlclose (self); */
4742 if { (eval echo configure:4743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
4743 (./conftest; exit; ) 2>/dev/null
4746 x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
4747 x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
4748 x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
4751 # compilation failed
4752 lt_cv_dlopen_self=no
4760 echo "$ac_t""$lt_cv_dlopen_self" 1>&6
4762 if test "x$lt_cv_dlopen_self" = xyes; then
4763 LDFLAGS="$LDFLAGS $link_static_flag"
4764 echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
4765 echo "configure:4766: checking whether a statically linked program can dlopen itself" >&5
4766 if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
4767 echo $ac_n "(cached) $ac_c" 1>&6
4769 if test "$cross_compiling" = yes; then :
4770 lt_cv_dlopen_self_static=cross
4772 lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
4773 lt_status=$lt_dlunknown
4774 cat > conftest.$ac_ext <<EOF
4775 #line 4776 "configure"
4776 #include "confdefs.h"
4785 # define LT_DLGLOBAL RTLD_GLOBAL
4788 # define LT_DLGLOBAL DL_GLOBAL
4790 # define LT_DLGLOBAL 0
4794 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
4795 find out it does not work in some platform. */
4796 #ifndef LT_DLLAZY_OR_NOW
4798 # define LT_DLLAZY_OR_NOW RTLD_LAZY
4801 # define LT_DLLAZY_OR_NOW DL_LAZY
4804 # define LT_DLLAZY_OR_NOW RTLD_NOW
4807 # define LT_DLLAZY_OR_NOW DL_NOW
4809 # define LT_DLLAZY_OR_NOW 0
4817 extern "C" void exit (int);
4820 void fnord() { int i=42;}
4823 void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
4824 int status = $lt_dlunknown;
4828 if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
4829 else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
4830 /* dlclose (self); */
4836 if { (eval echo configure:4837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
4837 (./conftest; exit; ) 2>/dev/null
4840 x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
4841 x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
4842 x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
4845 # compilation failed
4846 lt_cv_dlopen_self_static=no
4854 echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
4857 CPPFLAGS="$save_CPPFLAGS"
4858 LDFLAGS="$save_LDFLAGS"
4863 case $lt_cv_dlopen_self in
4864 yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
4865 *) enable_dlopen_self=unknown ;;
4868 case $lt_cv_dlopen_self_static in
4869 yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
4870 *) enable_dlopen_self_static=unknown ;;
4875 ## FIXME: this should be a separate macro
4877 if test "$enable_shared" = yes && test "$GCC" = yes; then
4878 case $archive_cmds in
4880 # FIXME: we may have to deal with multi-command sequences.
4883 # Test whether the compiler implicitly links with -lc since on some
4884 # systems, -lgcc has to come before -lc. If gcc already passes -lc
4885 # to ld, don't add -lc before -lgcc.
4886 echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
4887 echo "configure:4888: checking whether -lc should be explicitly linked in" >&5
4888 if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
4889 echo $ac_n "(cached) $ac_c" 1>&6
4892 echo 'static int dummy;' > conftest.$ac_ext
4894 if { (eval echo configure:4895: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
4897 libobjs=conftest.$ac_objext
4899 wl=$lt_cv_prog_cc_wl
4905 save_allow_undefined_flag=$allow_undefined_flag
4906 allow_undefined_flag=
4907 if { (eval echo configure:4908: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
4909 lt_cv_archive_cmds_need_lc=no
4911 lt_cv_archive_cmds_need_lc=yes
4913 allow_undefined_flag=$save_allow_undefined_flag
4915 cat conftest.err 1>&5
4919 echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
4923 need_lc=${lt_cv_archive_cmds_need_lc-yes}
4927 ## FIXME: this should be a separate macro
4929 # The second clause should only fire when bootstrapping the
4930 # libtool distribution, otherwise you forgot to ship ltmain.sh
4931 # with your package, and you will get complaints that there are
4932 # no rules to generate ltmain.sh.
4933 if test -f "$ltmain"; then
4936 # If there is no Makefile yet, we rely on a make rule to execute
4937 # `config.status --recheck' to rerun these tests and create the
4938 # libtool script then.
4939 test -f Makefile && make "$ltmain"
4942 if test -f "$ltmain"; then
4943 trap "$rm \"${ofile}T\"; exit 1" 1 2 15
4946 echo creating $ofile
4948 # Now quote all the things that may contain metacharacters while being
4949 # careful not to overquote the AC_SUBSTed values. We take copies of the
4950 # variables and quote the copies for generation of the libtool script.
4951 for var in echo old_CC old_CFLAGS \
4952 AR AR_FLAGS CC LD LN_S NM SHELL \
4953 reload_flag reload_cmds wl \
4954 pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
4955 thread_safe_flag_spec whole_archive_flag_spec libname_spec \
4956 library_names_spec soname_spec \
4957 RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
4958 old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
4959 postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
4960 old_striplib striplib file_magic_cmd export_symbols_cmds \
4961 deplibs_check_method allow_undefined_flag no_undefined_flag \
4962 finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
4963 global_symbol_to_c_name_address \
4964 hardcode_libdir_flag_spec hardcode_libdir_separator \
4965 sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
4966 compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
4969 reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
4970 old_postinstall_cmds | old_postuninstall_cmds | \
4971 export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
4972 extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
4973 postinstall_cmds | postuninstall_cmds | \
4974 finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
4975 # Double-quote double-evaled strings.
4976 eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
4979 eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
4984 cat <<__EOF__ > "${ofile}T"
4987 # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
4988 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
4989 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
4991 # Copyright (C) 1996-2000 Free Software Foundation, Inc.
4992 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
4994 # This program is free software; you can redistribute it and/or modify
4995 # it under the terms of the GNU General Public License as published by
4996 # the Free Software Foundation; either version 2 of the License, or
4997 # (at your option) any later version.
4999 # This program is distributed in the hope that it will be useful, but
5000 # WITHOUT ANY WARRANTY; without even the implied warranty of
5001 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
5002 # General Public License for more details.
5004 # You should have received a copy of the GNU General Public License
5005 # along with this program; if not, write to the Free Software
5006 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
5008 # As a special exception to the GNU General Public License, if you
5009 # distribute this file as part of a program that contains a
5010 # configuration script generated by Autoconf, you may include it under
5011 # the same distribution terms that you use for the rest of that program.
5013 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
5014 Xsed="sed -e s/^X//"
5016 # The HP-UX ksh and POSIX shell print the target directory to stdout
5018 if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
5020 # ### BEGIN LIBTOOL CONFIG
5022 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
5024 # Shell to use when invoking shell scripts.
5027 # Whether or not to build shared libraries.
5028 build_libtool_libs=$enable_shared
5030 # Whether or not to build static libraries.
5031 build_old_libs=$enable_static
5033 # Whether or not to add -lc for building shared libraries.
5034 build_libtool_need_lc=$need_lc
5036 # Whether or not to optimize for fast installation.
5037 fast_install=$enable_fast_install
5040 host_alias=$host_alias
5043 # An echo program that does not interpret backslashes.
5048 AR_FLAGS=$lt_AR_FLAGS
5050 # The default C compiler.
5053 # Is the compiler the GNU C compiler?
5056 # The linker used to build libraries.
5059 # Whether we need hard or soft links.
5062 # A BSD-compatible nm program.
5065 # A symbol stripping program
5068 # Used to examine libraries when file_magic_cmd begins "file"
5069 MAGIC_CMD=$MAGIC_CMD
5071 # Used on cygwin: DLL creation program.
5074 # Used on cygwin: object dumper.
5077 # Used on cygwin: assembler.
5080 # The name of the directory that contains temporary libtool files.
5083 # How to create reloadable object files.
5084 reload_flag=$lt_reload_flag
5085 reload_cmds=$lt_reload_cmds
5087 # How to pass a linker flag through the compiler.
5090 # Object file suffix (normally "o").
5093 # Old archive suffix (normally "a").
5096 # Executable file suffix (normally "").
5099 # Additional compiler flags for building library objects.
5100 pic_flag=$lt_pic_flag
5103 # Does compiler simultaneously support -c and -o options?
5104 compiler_c_o=$lt_compiler_c_o
5106 # Can we write directly to a .lo ?
5107 compiler_o_lo=$lt_compiler_o_lo
5109 # Must we lock files when doing compilation ?
5110 need_locks=$lt_need_locks
5112 # Do we need the lib prefix for modules?
5113 need_lib_prefix=$need_lib_prefix
5115 # Do we need a version for libraries?
5116 need_version=$need_version
5118 # Whether dlopen is supported.
5119 dlopen_support=$enable_dlopen
5121 # Whether dlopen of programs is supported.
5122 dlopen_self=$enable_dlopen_self
5124 # Whether dlopen of statically linked programs is supported.
5125 dlopen_self_static=$enable_dlopen_self_static
5127 # Compiler flag to prevent dynamic linking.
5128 link_static_flag=$lt_link_static_flag
5130 # Compiler flag to turn off builtin functions.
5131 no_builtin_flag=$lt_no_builtin_flag
5133 # Compiler flag to allow reflexive dlopens.
5134 export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
5136 # Compiler flag to generate shared objects directly from archives.
5137 whole_archive_flag_spec=$lt_whole_archive_flag_spec
5139 # Compiler flag to generate thread-safe objects.
5140 thread_safe_flag_spec=$lt_thread_safe_flag_spec
5142 # Library versioning type.
5143 version_type=$version_type
5145 # Format of library name prefix.
5146 libname_spec=$lt_libname_spec
5148 # List of archive names. First name is the real one, the rest are links.
5149 # The last name is the one that the linker finds with -lNAME.
5150 library_names_spec=$lt_library_names_spec
5152 # The coded name of the library, if different from the real name.
5153 soname_spec=$lt_soname_spec
5155 # Commands used to build and install an old-style archive.
5157 old_archive_cmds=$lt_old_archive_cmds
5158 old_postinstall_cmds=$lt_old_postinstall_cmds
5159 old_postuninstall_cmds=$lt_old_postuninstall_cmds
5161 # Create an old-style archive from a shared archive.
5162 old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
5164 # Create a temporary old-style archive to link instead of a shared archive.
5165 old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
5167 # Commands used to build and install a shared archive.
5168 archive_cmds=$lt_archive_cmds
5169 archive_expsym_cmds=$lt_archive_expsym_cmds
5170 postinstall_cmds=$lt_postinstall_cmds
5171 postuninstall_cmds=$lt_postuninstall_cmds
5173 # Commands to strip libraries.
5174 old_striplib=$lt_old_striplib
5175 striplib=$lt_striplib
5177 # Method to check whether dependent libraries are shared objects.
5178 deplibs_check_method=$lt_deplibs_check_method
5180 # Command to use when deplibs_check_method == file_magic.
5181 file_magic_cmd=$lt_file_magic_cmd
5183 # Flag that allows shared libraries with undefined symbols to be built.
5184 allow_undefined_flag=$lt_allow_undefined_flag
5186 # Flag that forces no undefined symbols.
5187 no_undefined_flag=$lt_no_undefined_flag
5189 # Commands used to finish a libtool library installation in a directory.
5190 finish_cmds=$lt_finish_cmds
5192 # Same as above, but a single script fragment to be evaled but not shown.
5193 finish_eval=$lt_finish_eval
5195 # Take the output of nm and produce a listing of raw symbols and C names.
5196 global_symbol_pipe=$lt_global_symbol_pipe
5198 # Transform the output of nm in a proper C declaration
5199 global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
5201 # Transform the output of nm in a C name address pair
5202 global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
5204 # This is the shared library runtime path variable.
5205 runpath_var=$runpath_var
5207 # This is the shared library path variable.
5208 shlibpath_var=$shlibpath_var
5210 # Is shlibpath searched before the hard-coded library search path?
5211 shlibpath_overrides_runpath=$shlibpath_overrides_runpath
5213 # How to hardcode a shared library path into an executable.
5214 hardcode_action=$hardcode_action
5216 # Whether we should hardcode library paths into libraries.
5217 hardcode_into_libs=$hardcode_into_libs
5219 # Flag to hardcode \$libdir into a binary during linking.
5220 # This must work even if \$libdir does not exist.
5221 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
5223 # Whether we need a single -rpath flag with a separated argument.
5224 hardcode_libdir_separator=$lt_hardcode_libdir_separator
5226 # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
5228 hardcode_direct=$hardcode_direct
5230 # Set to yes if using the -LDIR flag during linking hardcodes DIR into the
5232 hardcode_minus_L=$hardcode_minus_L
5234 # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
5235 # the resulting binary.
5236 hardcode_shlibpath_var=$hardcode_shlibpath_var
5238 # Variables whose values should be saved in libtool wrapper scripts and
5239 # restored at relink time.
5240 variables_saved_for_relink="$variables_saved_for_relink"
5242 # Whether libtool must link a program against all its dependency libraries.
5243 link_all_deplibs=$link_all_deplibs
5245 # Compile-time system search path for libraries
5246 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
5248 # Run-time system search path for libraries
5249 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
5251 # Fix the shell variable \$srcfile for the compiler.
5252 fix_srcfile_path="$fix_srcfile_path"
5254 # Set to yes if exported symbols are required.
5255 always_export_symbols=$always_export_symbols
5257 # The commands to list exported symbols.
5258 export_symbols_cmds=$lt_export_symbols_cmds
5260 # The commands to extract the exported symbol list from a shared archive.
5261 extract_expsyms_cmds=$lt_extract_expsyms_cmds
5263 # Symbols that should not be listed in the preloaded symbols.
5264 exclude_expsyms=$lt_exclude_expsyms
5266 # Symbols that must always be exported.
5267 include_expsyms=$lt_include_expsyms
5269 # ### END LIBTOOL CONFIG
5275 cat <<\EOF >> "${ofile}T"
5277 # AIX sometimes has problems with the GCC collect2 program. For some
5278 # reason, if we set the COLLECT_NAMES environment variable, the problems
5279 # vanish in a puff of smoke.
5280 if test "X${COLLECT_NAMES+set}" != Xset; then
5282 export COLLECT_NAMES
5289 cygwin* | mingw* | pw32* | os2*)
5290 cat <<'EOF' >> "${ofile}T"
5291 # This is a source program that is used to create dlls on Windows
5292 # Don't remove nor modify the starting and closing comments
5293 # /* ltdll.c starts here */
5294 # #define WIN32_LEAN_AND_MEAN
5295 # #include <windows.h>
5296 # #undef WIN32_LEAN_AND_MEAN
5297 # #include <stdio.h>
5299 # #ifndef __CYGWIN__
5300 # # ifdef __CYGWIN32__
5301 # # define __CYGWIN__ __CYGWIN32__
5305 # #ifdef __cplusplus
5308 # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
5309 # #ifdef __cplusplus
5314 # #include <cygwin/cygwin_dll.h>
5315 # DECLARE_CYGWIN_DLL( DllMain );
5317 # HINSTANCE __hDllInstance_base;
5320 # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
5322 # __hDllInstance_base = hInst;
5325 # /* ltdll.c ends here */
5326 # This is a source program that is used to create import libraries
5327 # on Windows for dlls which lack them. Don't remove nor modify the
5328 # starting and closing comments
5329 # /* impgen.c starts here */
5330 # /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
5332 # This file is part of GNU libtool.
5334 # This program is free software; you can redistribute it and/or modify
5335 # it under the terms of the GNU General Public License as published by
5336 # the Free Software Foundation; either version 2 of the License, or
5337 # (at your option) any later version.
5339 # This program is distributed in the hope that it will be useful,
5340 # but WITHOUT ANY WARRANTY; without even the implied warranty of
5341 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
5342 # GNU General Public License for more details.
5344 # You should have received a copy of the GNU General Public License
5345 # along with this program; if not, write to the Free Software
5346 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
5349 # #include <stdio.h> /* for printf() */
5350 # #include <unistd.h> /* for open(), lseek(), read() */
5351 # #include <fcntl.h> /* for O_RDONLY, O_BINARY */
5352 # #include <string.h> /* for strdup() */
5354 # /* O_BINARY isn't required (or even defined sometimes) under Unix */
5356 # #define O_BINARY 0
5359 # static unsigned int
5360 # pe_get16 (fd, offset)
5364 # unsigned char b[2];
5365 # lseek (fd, offset, SEEK_SET);
5367 # return b[0] + (b[1]<<8);
5370 # static unsigned int
5371 # pe_get32 (fd, offset)
5375 # unsigned char b[4];
5376 # lseek (fd, offset, SEEK_SET);
5378 # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
5381 # static unsigned int
5385 # unsigned char *b = ptr;
5386 # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
5395 # unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
5396 # unsigned long export_rva, export_size, nsections, secptr, expptr;
5397 # unsigned long name_rvas, nexp;
5398 # unsigned char *expdata, *erva;
5399 # char *filename, *dll_name;
5401 # filename = argv[1];
5403 # dll = open(filename, O_RDONLY|O_BINARY);
5407 # dll_name = filename;
5409 # for (i=0; filename[i]; i++)
5410 # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
5411 # dll_name = filename + i +1;
5413 # pe_header_offset = pe_get32 (dll, 0x3c);
5414 # opthdr_ofs = pe_header_offset + 4 + 20;
5415 # num_entries = pe_get32 (dll, opthdr_ofs + 92);
5417 # if (num_entries < 1) /* no exports */
5420 # export_rva = pe_get32 (dll, opthdr_ofs + 96);
5421 # export_size = pe_get32 (dll, opthdr_ofs + 100);
5422 # nsections = pe_get16 (dll, pe_header_offset + 4 +2);
5423 # secptr = (pe_header_offset + 4 + 20 +
5424 # pe_get16 (dll, pe_header_offset + 4 + 16));
5427 # for (i = 0; i < nsections; i++)
5430 # unsigned long secptr1 = secptr + 40 * i;
5431 # unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
5432 # unsigned long vsize = pe_get32 (dll, secptr1 + 16);
5433 # unsigned long fptr = pe_get32 (dll, secptr1 + 20);
5434 # lseek(dll, secptr1, SEEK_SET);
5435 # read(dll, sname, 8);
5436 # if (vaddr <= export_rva && vaddr+vsize > export_rva)
5438 # expptr = fptr + (export_rva - vaddr);
5439 # if (export_rva + export_size > vaddr + vsize)
5440 # export_size = vsize - (export_rva - vaddr);
5445 # expdata = (unsigned char*)malloc(export_size);
5446 # lseek (dll, expptr, SEEK_SET);
5447 # read (dll, expdata, export_size);
5448 # erva = expdata - export_rva;
5450 # nexp = pe_as32 (expdata+24);
5451 # name_rvas = pe_as32 (expdata+32);
5453 # printf ("EXPORTS\n");
5454 # for (i = 0; i<nexp; i++)
5456 # unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
5457 # printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
5462 # /* impgen.c ends here */
5468 # We use sed instead of cat because bash on DJGPP gets confused if
5469 # if finds mixed CR/LF and LF-only lines. Since sed operates in
5470 # text mode, it properly converts lines to CR/LF. This bash problem
5471 # is reportedly fixed, but why not run on old versions too?
5472 sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
5474 mv -f "${ofile}T" "$ofile" || \
5475 (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
5484 # Check whether --with-system-libtool or --without-system-libtool was given.
5485 if test "${with_system_libtool+set}" = set; then
5486 withval="$with_system_libtool"
5487 # Extract the first word of "libtool", so it can be a program name with args.
5488 set dummy libtool; ac_word=$2
5489 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5490 echo "configure:5491: checking for $ac_word" >&5
5491 if eval "test \"`echo '$''{'ac_cv_path_LIBTOOL'+set}'`\" = set"; then
5492 echo $ac_n "(cached) $ac_c" 1>&6
5496 ac_cv_path_LIBTOOL="$LIBTOOL" # Let the user override the test with a path.
5499 ac_cv_path_LIBTOOL="$LIBTOOL" # Let the user override the test with a dos path.
5502 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5503 ac_dummy="$PATH:/usr/local/bin"
5504 for ac_dir in $ac_dummy; do
5505 test -z "$ac_dir" && ac_dir=.
5506 if test -f $ac_dir/$ac_word; then
5507 ac_cv_path_LIBTOOL="$ac_dir/$ac_word"
5515 LIBTOOL="$ac_cv_path_LIBTOOL"
5516 if test -n "$LIBTOOL"; then
5517 echo "$ac_t""$LIBTOOL" 1>&6
5519 echo "$ac_t""no" 1>&6
5524 LIBTOOL="`pwd`/libtool"
5529 # This can be used to rebuild libtool when needed
5530 LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
5532 # Prevent multiple expansion
5541 # Check whether --enable-strict-dependencies or --disable-strict-dependencies was given.
5542 if test "${enable_strict_dependencies+set}" = set; then
5543 enableval="$enable_strict_dependencies"
5548 logdir='${localstatedir}/log/radius'
5549 echo $ac_n "checking logdir""... $ac_c" 1>&6
5550 echo "configure:5551: checking logdir" >&5
5551 # Check whether --with-logdir or --without-logdir was given.
5552 if test "${with_logdir+set}" = set; then
5553 withval="$with_logdir"
5556 { echo "configure: error: Need logdir" 1>&2; exit 1; }
5568 echo "$ac_t""$logdir" 1>&6
5570 radacctdir='${logdir}/radacct'
5571 echo $ac_n "checking radacctdir""... $ac_c" 1>&6
5572 echo "configure:5573: checking radacctdir" >&5
5573 # Check whether --with-radacctdir or --without-radacctdir was given.
5574 if test "${with_radacctdir+set}" = set; then
5575 withval="$with_radacctdir"
5578 { echo "configure: error: Need radacctdir" 1>&2; exit 1; }
5583 radacctdir="$withval"
5590 echo "$ac_t""$radacctdir" 1>&6
5592 raddbdir='${sysconfdir}/raddb'
5593 echo $ac_n "checking raddbdir""... $ac_c" 1>&6
5594 echo "configure:5595: checking raddbdir" >&5
5595 # Check whether --with-raddbdir or --without-raddbdir was given.
5596 if test "${with_raddbdir+set}" = set; then
5597 withval="$with_raddbdir"
5600 { echo "configure: error: Need raddbdir" 1>&2; exit 1; }
5612 echo "$ac_t""$raddbdir" 1>&6
5615 # Check whether --with-ascend-binary or --without-ascend-binary was given.
5616 if test "${with_ascend_binary+set}" = set; then
5617 withval="$with_ascend_binary"
5627 if test "X$ASCEND_BINARY" = "Xyes"; then
5628 cat >> confdefs.h <<\EOF
5629 #define ASCEND_BINARY 1
5635 # Check whether --with-threads or --without-threads was given.
5636 if test "${with_threads+set}" = set; then
5637 withval="$with_threads"
5649 # Check whether --with-snmp or --without-snmp was given.
5650 if test "${with_snmp+set}" = set; then
5651 withval="$with_snmp"
5662 rad_enable_largefiles=no
5663 # Check whether --with-large-files or --without-large-files was given.
5664 if test "${with_large_files+set}" = set; then
5665 withval="$with_large_files"
5668 rad_enable_largefiles=yes
5680 # Check whether --with-static_modules or --without-static_modules was given.
5681 if test "${with_static_modules+set}" = set; then
5682 withval="$with_static_modules"
5684 for i in $withval; do
5685 STATIC_MODULES="$STATIC_MODULES -dlpreopen ../modules/rlm_$i/rlm_$i.la"
5691 # Check whether --enable-developer or --disable-developer was given.
5692 if test "${enable_developer+set}" = set; then
5693 enableval="$enable_developer"
5694 case "$enableval" in
5705 if test "x$developer" != "xno" -a -d $srcdir/CVS; then
5710 # Check whether --with-experimental-modules or --without-experimental-modules was given.
5711 if test "${with_experimental_modules+set}" = set; then
5712 withval="$with_experimental_modules"
5724 # Check whether --with-rlm-FOO-lib-dir or --without-rlm-FOO-lib-dir was given.
5725 if test "${with_rlm_FOO_lib_dir+set}" = set; then
5726 withval="$with_rlm_FOO_lib_dir"
5735 # Check whether --with-rlm-FOO-include-dir or --without-rlm-FOO-include-dir was given.
5736 if test "${with_rlm_FOO_include_dir+set}" = set; then
5737 withval="$with_rlm_FOO_include_dir"
5748 CHECKRAD=checkrad.pl
5749 # Extract the first word of "perl", so it can be a program name with args.
5750 set dummy perl; ac_word=$2
5751 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5752 echo "configure:5753: checking for $ac_word" >&5
5753 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
5754 echo $ac_n "(cached) $ac_c" 1>&6
5758 ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
5761 ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
5764 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5766 for ac_dir in $ac_dummy; do
5767 test -z "$ac_dir" && ac_dir=.
5768 if test -f $ac_dir/$ac_word; then
5769 ac_cv_path_PERL="$ac_dir/$ac_word"
5774 test -z "$ac_cv_path_PERL" && ac_cv_path_PERL="/usr/local/bin/perl"
5778 PERL="$ac_cv_path_PERL"
5779 if test -n "$PERL"; then
5780 echo "$ac_t""$PERL" 1>&6
5782 echo "$ac_t""no" 1>&6
5785 if test "x$ac_cv_path_PERL" = "x"; then
5786 echo "configure: warning: perl not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
5788 # Extract the first word of "snmpget", so it can be a program name with args.
5789 set dummy snmpget; ac_word=$2
5790 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5791 echo "configure:5792: checking for $ac_word" >&5
5792 if eval "test \"`echo '$''{'ac_cv_path_SNMPGET'+set}'`\" = set"; then
5793 echo $ac_n "(cached) $ac_c" 1>&6
5797 ac_cv_path_SNMPGET="$SNMPGET" # Let the user override the test with a path.
5800 ac_cv_path_SNMPGET="$SNMPGET" # Let the user override the test with a dos path.
5803 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5805 for ac_dir in $ac_dummy; do
5806 test -z "$ac_dir" && ac_dir=.
5807 if test -f $ac_dir/$ac_word; then
5808 ac_cv_path_SNMPGET="$ac_dir/$ac_word"
5816 SNMPGET="$ac_cv_path_SNMPGET"
5817 if test -n "$SNMPGET"; then
5818 echo "$ac_t""$SNMPGET" 1>&6
5820 echo "$ac_t""no" 1>&6
5823 if test "x$ac_cv_path_SNMPGET" = "x"; then
5824 echo "configure: warning: snmpget not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
5827 # Extract the first word of "snmpwalk", so it can be a program name with args.
5828 set dummy snmpwalk; ac_word=$2
5829 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5830 echo "configure:5831: checking for $ac_word" >&5
5831 if eval "test \"`echo '$''{'ac_cv_path_SNMPWALK'+set}'`\" = set"; then
5832 echo $ac_n "(cached) $ac_c" 1>&6
5836 ac_cv_path_SNMPWALK="$SNMPWALK" # Let the user override the test with a path.
5839 ac_cv_path_SNMPWALK="$SNMPWALK" # Let the user override the test with a dos path.
5842 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5844 for ac_dir in $ac_dummy; do
5845 test -z "$ac_dir" && ac_dir=.
5846 if test -f $ac_dir/$ac_word; then
5847 ac_cv_path_SNMPWALK="$ac_dir/$ac_word"
5855 SNMPWALK="$ac_cv_path_SNMPWALK"
5856 if test -n "$SNMPWALK"; then
5857 echo "$ac_t""$SNMPWALK" 1>&6
5859 echo "$ac_t""no" 1>&6
5862 if test "x$ac_cv_path_SNMPWALK" = "x"; then
5863 echo "configure: warning: snmpwalk not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
5866 # Extract the first word of "rusers", so it can be a program name with args.
5867 set dummy rusers; ac_word=$2
5868 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5869 echo "configure:5870: checking for $ac_word" >&5
5870 if eval "test \"`echo '$''{'ac_cv_path_RUSERS'+set}'`\" = set"; then
5871 echo $ac_n "(cached) $ac_c" 1>&6
5875 ac_cv_path_RUSERS="$RUSERS" # Let the user override the test with a path.
5878 ac_cv_path_RUSERS="$RUSERS" # Let the user override the test with a dos path.
5881 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5883 for ac_dir in $ac_dummy; do
5884 test -z "$ac_dir" && ac_dir=.
5885 if test -f $ac_dir/$ac_word; then
5886 ac_cv_path_RUSERS="$ac_dir/$ac_word"
5891 test -z "$ac_cv_path_RUSERS" && ac_cv_path_RUSERS="/usr/bin/rusers"
5895 RUSERS="$ac_cv_path_RUSERS"
5896 if test -n "$RUSERS"; then
5897 echo "$ac_t""$RUSERS" 1>&6
5899 echo "$ac_t""no" 1>&6
5903 missing_dir=`cd $ac_aux_dir && pwd`
5904 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
5905 echo "configure:5906: checking for working aclocal" >&5
5906 # Run test in a subshell; some versions of sh will print an error if
5907 # an executable is not found, even if stderr is redirected.
5908 # Redirect stdin to placate older versions of autoconf. Sigh.
5909 if (aclocal --version) < /dev/null > /dev/null 2>&1; then
5911 echo "$ac_t""found" 1>&6
5913 ACLOCAL="$missing_dir/missing aclocal"
5914 echo "$ac_t""missing" 1>&6
5917 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
5918 echo "configure:5919: checking for working autoconf" >&5
5919 # Run test in a subshell; some versions of sh will print an error if
5920 # an executable is not found, even if stderr is redirected.
5921 # Redirect stdin to placate older versions of autoconf. Sigh.
5922 if (autoconf --version) < /dev/null > /dev/null 2>&1; then
5924 echo "$ac_t""found" 1>&6
5926 AUTOCONF="$missing_dir/missing autoconf"
5927 echo "$ac_t""missing" 1>&6
5930 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
5931 echo "configure:5932: checking for working autoheader" >&5
5932 # Run test in a subshell; some versions of sh will print an error if
5933 # an executable is not found, even if stderr is redirected.
5934 # Redirect stdin to placate older versions of autoconf. Sigh.
5935 if (autoheader --version) < /dev/null > /dev/null 2>&1; then
5936 AUTOHEADER=autoheader
5937 echo "$ac_t""found" 1>&6
5939 AUTOHEADER="$missing_dir/missing autoheader"
5940 echo "$ac_t""missing" 1>&6
5944 # Extract the first word of "locate", so it can be a program name with args.
5945 set dummy locate; ac_word=$2
5946 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5947 echo "configure:5948: checking for $ac_word" >&5
5948 if eval "test \"`echo '$''{'ac_cv_path_LOCATE'+set}'`\" = set"; then
5949 echo $ac_n "(cached) $ac_c" 1>&6
5953 ac_cv_path_LOCATE="$LOCATE" # Let the user override the test with a path.
5956 ac_cv_path_LOCATE="$LOCATE" # Let the user override the test with a dos path.
5959 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5961 for ac_dir in $ac_dummy; do
5962 test -z "$ac_dir" && ac_dir=.
5963 if test -f $ac_dir/$ac_word; then
5964 ac_cv_path_LOCATE="$ac_dir/$ac_word"
5972 LOCATE="$ac_cv_path_LOCATE"
5973 if test -n "$LOCATE"; then
5974 echo "$ac_t""$LOCATE" 1>&6
5976 echo "$ac_t""no" 1>&6
5979 # Extract the first word of "dirname", so it can be a program name with args.
5980 set dummy dirname; ac_word=$2
5981 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5982 echo "configure:5983: checking for $ac_word" >&5
5983 if eval "test \"`echo '$''{'ac_cv_path_DIRNAME'+set}'`\" = set"; then
5984 echo $ac_n "(cached) $ac_c" 1>&6
5988 ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a path.
5991 ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a dos path.
5994 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5996 for ac_dir in $ac_dummy; do
5997 test -z "$ac_dir" && ac_dir=.
5998 if test -f $ac_dir/$ac_word; then
5999 ac_cv_path_DIRNAME="$ac_dir/$ac_word"
6007 DIRNAME="$ac_cv_path_DIRNAME"
6008 if test -n "$DIRNAME"; then
6009 echo "$ac_t""$DIRNAME" 1>&6
6011 echo "$ac_t""no" 1>&6
6014 # Extract the first word of "grep", so it can be a program name with args.
6015 set dummy grep; ac_word=$2
6016 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
6017 echo "configure:6018: checking for $ac_word" >&5
6018 if eval "test \"`echo '$''{'ac_cv_path_GREP'+set}'`\" = set"; then
6019 echo $ac_n "(cached) $ac_c" 1>&6
6023 ac_cv_path_GREP="$GREP" # Let the user override the test with a path.
6026 ac_cv_path_GREP="$GREP" # Let the user override the test with a dos path.
6029 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
6031 for ac_dir in $ac_dummy; do
6032 test -z "$ac_dir" && ac_dir=.
6033 if test -f $ac_dir/$ac_word; then
6034 ac_cv_path_GREP="$ac_dir/$ac_word"
6042 GREP="$ac_cv_path_GREP"
6043 if test -n "$GREP"; then
6044 echo "$ac_t""$GREP" 1>&6
6046 echo "$ac_t""no" 1>&6
6052 if test "x$WITH_THREADS" = "xyes"; then
6053 if test $ac_cv_prog_suncc = "yes"; then
6054 CFLAGS="$CFLAGS -mt"
6057 for ac_hdr in pthread.h
6059 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
6060 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
6061 echo "configure:6062: checking for $ac_hdr" >&5
6062 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
6063 echo $ac_n "(cached) $ac_c" 1>&6
6065 cat > conftest.$ac_ext <<EOF
6066 #line 6067 "configure"
6067 #include "confdefs.h"
6070 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6071 { (eval echo configure:6072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6072 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6073 if test -z "$ac_err"; then
6075 eval "ac_cv_header_$ac_safe=yes"
6078 echo "configure: failed program was:" >&5
6079 cat conftest.$ac_ext >&5
6081 eval "ac_cv_header_$ac_safe=no"
6085 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
6086 echo "$ac_t""yes" 1>&6
6087 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
6088 cat >> confdefs.h <<EOF
6089 #define $ac_tr_hdr 1
6093 echo "$ac_t""no" 1>&6
6099 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
6100 echo "configure:6101: checking for pthread_create in -lpthread" >&5
6101 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
6102 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6103 echo $ac_n "(cached) $ac_c" 1>&6
6105 ac_save_LIBS="$LIBS"
6106 LIBS="-lpthread $LIBS"
6107 cat > conftest.$ac_ext <<EOF
6108 #line 6109 "configure"
6109 #include "confdefs.h"
6110 /* Override any gcc2 internal prototype to avoid an error. */
6111 /* We use char because int might match the return type of a gcc2
6112 builtin and then its argument prototype would still apply. */
6113 char pthread_create();
6119 if { (eval echo configure:6120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6121 eval "ac_cv_lib_$ac_lib_var=yes"
6123 echo "configure: failed program was:" >&5
6124 cat conftest.$ac_ext >&5
6126 eval "ac_cv_lib_$ac_lib_var=no"
6129 LIBS="$ac_save_LIBS"
6132 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6133 echo "$ac_t""yes" 1>&6
6134 CFLAGS="$CFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS"
6135 LIBS="$LIBS -lpthread"
6137 echo "$ac_t""no" 1>&6
6138 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
6139 echo "configure:6140: checking for pthread_create in -lc_r" >&5
6140 ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
6141 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6142 echo $ac_n "(cached) $ac_c" 1>&6
6144 ac_save_LIBS="$LIBS"
6146 cat > conftest.$ac_ext <<EOF
6147 #line 6148 "configure"
6148 #include "confdefs.h"
6149 /* Override any gcc2 internal prototype to avoid an error. */
6150 /* We use char because int might match the return type of a gcc2
6151 builtin and then its argument prototype would still apply. */
6152 char pthread_create();
6158 if { (eval echo configure:6159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6160 eval "ac_cv_lib_$ac_lib_var=yes"
6162 echo "configure: failed program was:" >&5
6163 cat conftest.$ac_ext >&5
6165 eval "ac_cv_lib_$ac_lib_var=no"
6168 LIBS="$ac_save_LIBS"
6171 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6172 echo "$ac_t""yes" 1>&6
6173 CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE"
6175 echo "$ac_t""no" 1>&6
6185 if test "x$WITH_THREADS" != "xyes"; then
6187 ac_cv_header_pthread_h="no"
6192 echo $ac_n "checking for library containing sem_init""... $ac_c" 1>&6
6193 echo "configure:6194: checking for library containing sem_init" >&5
6194 if eval "test \"`echo '$''{'ac_cv_search_sem_init'+set}'`\" = set"; then
6195 echo $ac_n "(cached) $ac_c" 1>&6
6197 ac_func_search_save_LIBS="$LIBS"
6198 ac_cv_search_sem_init="no"
6199 cat > conftest.$ac_ext <<EOF
6200 #line 6201 "configure"
6201 #include "confdefs.h"
6202 /* Override any gcc2 internal prototype to avoid an error. */
6203 /* We use char because int might match the return type of a gcc2
6204 builtin and then its argument prototype would still apply. */
6211 if { (eval echo configure:6212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6213 ac_cv_search_sem_init="none required"
6215 echo "configure: failed program was:" >&5
6216 cat conftest.$ac_ext >&5
6219 test "$ac_cv_search_sem_init" = "no" && for i in pthread sem posix4 rt; do
6220 LIBS="-l$i $ac_func_search_save_LIBS"
6221 cat > conftest.$ac_ext <<EOF
6222 #line 6223 "configure"
6223 #include "confdefs.h"
6224 /* Override any gcc2 internal prototype to avoid an error. */
6225 /* We use char because int might match the return type of a gcc2
6226 builtin and then its argument prototype would still apply. */
6233 if { (eval echo configure:6234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6235 ac_cv_search_sem_init="-l$i"
6238 echo "configure: failed program was:" >&5
6239 cat conftest.$ac_ext >&5
6243 LIBS="$ac_func_search_save_LIBS"
6246 echo "$ac_t""$ac_cv_search_sem_init" 1>&6
6247 if test "$ac_cv_search_sem_init" != "no"; then
6248 test "$ac_cv_search_sem_init" = "none required" || LIBS="$ac_cv_search_sem_init $LIBS"
6251 { echo "configure: error: -lsem not found. You may want to download it from ftp://ftp.to.gd-es.com/pub/BSDI/libsem.tar.bz2 or ftp://ftp.freeradius.org/pub/radius/contrib/libsem.tar.gz" 1>&2; exit 1; }
6256 echo $ac_n "checking for getsockname in -lsocket""... $ac_c" 1>&6
6257 echo "configure:6258: checking for getsockname in -lsocket" >&5
6258 ac_lib_var=`echo socket'_'getsockname | sed 'y%./+-%__p_%'`
6259 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6260 echo $ac_n "(cached) $ac_c" 1>&6
6262 ac_save_LIBS="$LIBS"
6263 LIBS="-lsocket $LIBS"
6264 cat > conftest.$ac_ext <<EOF
6265 #line 6266 "configure"
6266 #include "confdefs.h"
6267 /* Override any gcc2 internal prototype to avoid an error. */
6268 /* We use char because int might match the return type of a gcc2
6269 builtin and then its argument prototype would still apply. */
6276 if { (eval echo configure:6277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6278 eval "ac_cv_lib_$ac_lib_var=yes"
6280 echo "configure: failed program was:" >&5
6281 cat conftest.$ac_ext >&5
6283 eval "ac_cv_lib_$ac_lib_var=no"
6286 LIBS="$ac_save_LIBS"
6289 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6290 echo "$ac_t""yes" 1>&6
6291 ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
6292 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
6293 cat >> confdefs.h <<EOF
6294 #define $ac_tr_lib 1
6297 LIBS="-lsocket $LIBS"
6300 echo "$ac_t""no" 1>&6
6304 echo $ac_n "checking for inet_aton in -lresolv""... $ac_c" 1>&6
6305 echo "configure:6306: checking for inet_aton in -lresolv" >&5
6306 ac_lib_var=`echo resolv'_'inet_aton | sed 'y%./+-%__p_%'`
6307 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6308 echo $ac_n "(cached) $ac_c" 1>&6
6310 ac_save_LIBS="$LIBS"
6311 LIBS="-lresolv $LIBS"
6312 cat > conftest.$ac_ext <<EOF
6313 #line 6314 "configure"
6314 #include "confdefs.h"
6315 /* Override any gcc2 internal prototype to avoid an error. */
6316 /* We use char because int might match the return type of a gcc2
6317 builtin and then its argument prototype would still apply. */
6324 if { (eval echo configure:6325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6326 eval "ac_cv_lib_$ac_lib_var=yes"
6328 echo "configure: failed program was:" >&5
6329 cat conftest.$ac_ext >&5
6331 eval "ac_cv_lib_$ac_lib_var=no"
6334 LIBS="$ac_save_LIBS"
6337 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6338 echo "$ac_t""yes" 1>&6
6339 ac_tr_lib=HAVE_LIB`echo resolv | sed -e 's/[^a-zA-Z0-9_]/_/g' \
6340 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
6341 cat >> confdefs.h <<EOF
6342 #define $ac_tr_lib 1
6345 LIBS="-lresolv $LIBS"
6348 echo "$ac_t""no" 1>&6
6352 echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6
6353 echo "configure:6354: checking for inet_ntoa in -lnsl" >&5
6354 ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'`
6355 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6356 echo $ac_n "(cached) $ac_c" 1>&6
6358 ac_save_LIBS="$LIBS"
6360 cat > conftest.$ac_ext <<EOF
6361 #line 6362 "configure"
6362 #include "confdefs.h"
6363 /* Override any gcc2 internal prototype to avoid an error. */
6364 /* We use char because int might match the return type of a gcc2
6365 builtin and then its argument prototype would still apply. */
6372 if { (eval echo configure:6373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6374 eval "ac_cv_lib_$ac_lib_var=yes"
6376 echo "configure: failed program was:" >&5
6377 cat conftest.$ac_ext >&5
6379 eval "ac_cv_lib_$ac_lib_var=no"
6382 LIBS="$ac_save_LIBS"
6385 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6386 echo "$ac_t""yes" 1>&6
6387 ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
6388 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
6389 cat >> confdefs.h <<EOF
6390 #define $ac_tr_lib 1
6396 echo "$ac_t""no" 1>&6
6402 for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
6404 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
6405 echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
6406 echo "configure:6407: checking for $ac_hdr that defines DIR" >&5
6407 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
6408 echo $ac_n "(cached) $ac_c" 1>&6
6410 cat > conftest.$ac_ext <<EOF
6411 #line 6412 "configure"
6412 #include "confdefs.h"
6413 #include <sys/types.h>
6419 if { (eval echo configure:6420: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
6421 eval "ac_cv_header_dirent_$ac_safe=yes"
6423 echo "configure: failed program was:" >&5
6424 cat conftest.$ac_ext >&5
6426 eval "ac_cv_header_dirent_$ac_safe=no"
6430 if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
6431 echo "$ac_t""yes" 1>&6
6432 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
6433 cat >> confdefs.h <<EOF
6434 #define $ac_tr_hdr 1
6436 ac_header_dirent=$ac_hdr; break
6438 echo "$ac_t""no" 1>&6
6441 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
6442 if test $ac_header_dirent = dirent.h; then
6443 echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
6444 echo "configure:6445: checking for opendir in -ldir" >&5
6445 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
6446 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6447 echo $ac_n "(cached) $ac_c" 1>&6
6449 ac_save_LIBS="$LIBS"
6451 cat > conftest.$ac_ext <<EOF
6452 #line 6453 "configure"
6453 #include "confdefs.h"
6454 /* Override any gcc2 internal prototype to avoid an error. */
6455 /* We use char because int might match the return type of a gcc2
6456 builtin and then its argument prototype would still apply. */
6463 if { (eval echo configure:6464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6465 eval "ac_cv_lib_$ac_lib_var=yes"
6467 echo "configure: failed program was:" >&5
6468 cat conftest.$ac_ext >&5
6470 eval "ac_cv_lib_$ac_lib_var=no"
6473 LIBS="$ac_save_LIBS"
6476 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6477 echo "$ac_t""yes" 1>&6
6480 echo "$ac_t""no" 1>&6
6484 echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
6485 echo "configure:6486: checking for opendir in -lx" >&5
6486 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
6487 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6488 echo $ac_n "(cached) $ac_c" 1>&6
6490 ac_save_LIBS="$LIBS"
6492 cat > conftest.$ac_ext <<EOF
6493 #line 6494 "configure"
6494 #include "confdefs.h"
6495 /* Override any gcc2 internal prototype to avoid an error. */
6496 /* We use char because int might match the return type of a gcc2
6497 builtin and then its argument prototype would still apply. */
6504 if { (eval echo configure:6505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6506 eval "ac_cv_lib_$ac_lib_var=yes"
6508 echo "configure: failed program was:" >&5
6509 cat conftest.$ac_ext >&5
6511 eval "ac_cv_lib_$ac_lib_var=no"
6514 LIBS="$ac_save_LIBS"
6517 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6518 echo "$ac_t""yes" 1>&6
6521 echo "$ac_t""no" 1>&6
6526 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
6527 echo "configure:6528: checking for ANSI C header files" >&5
6528 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
6529 echo $ac_n "(cached) $ac_c" 1>&6
6531 cat > conftest.$ac_ext <<EOF
6532 #line 6533 "configure"
6533 #include "confdefs.h"
6539 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6540 { (eval echo configure:6541: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6541 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6542 if test -z "$ac_err"; then
6544 ac_cv_header_stdc=yes
6547 echo "configure: failed program was:" >&5
6548 cat conftest.$ac_ext >&5
6550 ac_cv_header_stdc=no
6554 if test $ac_cv_header_stdc = yes; then
6555 # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
6556 cat > conftest.$ac_ext <<EOF
6557 #line 6558 "configure"
6558 #include "confdefs.h"
6561 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6562 egrep "memchr" >/dev/null 2>&1; then
6566 ac_cv_header_stdc=no
6572 if test $ac_cv_header_stdc = yes; then
6573 # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
6574 cat > conftest.$ac_ext <<EOF
6575 #line 6576 "configure"
6576 #include "confdefs.h"
6579 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6580 egrep "free" >/dev/null 2>&1; then
6584 ac_cv_header_stdc=no
6590 if test $ac_cv_header_stdc = yes; then
6591 # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
6592 if test "$cross_compiling" = yes; then
6595 cat > conftest.$ac_ext <<EOF
6596 #line 6597 "configure"
6597 #include "confdefs.h"
6599 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
6600 #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
6601 #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
6602 int main () { int i; for (i = 0; i < 256; i++)
6603 if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
6607 if { (eval echo configure:6608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
6611 echo "configure: failed program was:" >&5
6612 cat conftest.$ac_ext >&5
6614 ac_cv_header_stdc=no
6622 echo "$ac_t""$ac_cv_header_stdc" 1>&6
6623 if test $ac_cv_header_stdc = yes; then
6624 cat >> confdefs.h <<\EOF
6625 #define STDC_HEADERS 1
6630 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
6631 echo "configure:6632: checking whether time.h and sys/time.h may both be included" >&5
6632 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
6633 echo $ac_n "(cached) $ac_c" 1>&6
6635 cat > conftest.$ac_ext <<EOF
6636 #line 6637 "configure"
6637 #include "confdefs.h"
6638 #include <sys/types.h>
6639 #include <sys/time.h>
6645 if { (eval echo configure:6646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
6647 ac_cv_header_time=yes
6649 echo "configure: failed program was:" >&5
6650 cat conftest.$ac_ext >&5
6652 ac_cv_header_time=no
6657 echo "$ac_t""$ac_cv_header_time" 1>&6
6658 if test $ac_cv_header_time = yes; then
6659 cat >> confdefs.h <<\EOF
6660 #define TIME_WITH_SYS_TIME 1
6665 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
6666 echo "configure:6667: checking for sys/wait.h that is POSIX.1 compatible" >&5
6667 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
6668 echo $ac_n "(cached) $ac_c" 1>&6
6670 cat > conftest.$ac_ext <<EOF
6671 #line 6672 "configure"
6672 #include "confdefs.h"
6673 #include <sys/types.h>
6674 #include <sys/wait.h>
6676 #define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
6679 #define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
6684 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
6687 if { (eval echo configure:6688: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
6689 ac_cv_header_sys_wait_h=yes
6691 echo "configure: failed program was:" >&5
6692 cat conftest.$ac_ext >&5
6694 ac_cv_header_sys_wait_h=no
6699 echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
6700 if test $ac_cv_header_sys_wait_h = yes; then
6701 cat >> confdefs.h <<\EOF
6702 #define HAVE_SYS_WAIT_H 1
6739 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
6740 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
6741 echo "configure:6742: checking for $ac_hdr" >&5
6742 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
6743 echo $ac_n "(cached) $ac_c" 1>&6
6745 cat > conftest.$ac_ext <<EOF
6746 #line 6747 "configure"
6747 #include "confdefs.h"
6750 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6751 { (eval echo configure:6752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6752 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6753 if test -z "$ac_err"; then
6755 eval "ac_cv_header_$ac_safe=yes"
6758 echo "configure: failed program was:" >&5
6759 cat conftest.$ac_ext >&5
6761 eval "ac_cv_header_$ac_safe=no"
6765 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
6766 echo "$ac_t""yes" 1>&6
6767 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
6768 cat >> confdefs.h <<EOF
6769 #define $ac_tr_hdr 1
6773 echo "$ac_t""no" 1>&6
6779 ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
6780 echo $ac_n "checking for regex.h""... $ac_c" 1>&6
6781 echo "configure:6782: checking for regex.h" >&5
6782 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
6783 echo $ac_n "(cached) $ac_c" 1>&6
6785 cat > conftest.$ac_ext <<EOF
6786 #line 6787 "configure"
6787 #include "confdefs.h"
6790 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6791 { (eval echo configure:6792: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6792 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6793 if test -z "$ac_err"; then
6795 eval "ac_cv_header_$ac_safe=yes"
6798 echo "configure: failed program was:" >&5
6799 cat conftest.$ac_ext >&5
6801 eval "ac_cv_header_$ac_safe=no"
6805 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
6806 echo "$ac_t""yes" 1>&6
6807 cat >> confdefs.h <<\EOF
6808 #define HAVE_REGEX_H 1
6812 echo "$ac_t""no" 1>&6
6815 if test "x$ac_cv_header_regex_h" = "xyes"; then
6818 cat > conftest.$ac_ext <<EOF
6819 #line 6820 "configure"
6820 #include "confdefs.h"
6827 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6828 egrep "yes" >/dev/null 2>&1; then
6830 cat >> confdefs.h <<\EOF
6831 #define HAVE_REG_EXTENDED 1
6841 if test "x$ac_cv_header_sys_security_h" = "xyes" && test "x$ac_cv_header_prot_h" = "xyes"
6843 cat >> confdefs.h <<\EOF
6849 if test "x$ac_cv_header_sia_h" = "xyes" && test "x$ac_cv_header_siad_h" = "xyes"
6851 cat >> confdefs.h <<\EOF
6859 echo $ac_n "checking for off_t""... $ac_c" 1>&6
6860 echo "configure:6861: checking for off_t" >&5
6861 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
6862 echo $ac_n "(cached) $ac_c" 1>&6
6864 cat > conftest.$ac_ext <<EOF
6865 #line 6866 "configure"
6866 #include "confdefs.h"
6867 #include <sys/types.h>
6873 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6874 egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
6876 ac_cv_type_off_t=yes
6884 echo "$ac_t""$ac_cv_type_off_t" 1>&6
6885 if test $ac_cv_type_off_t = no; then
6886 cat >> confdefs.h <<\EOF
6892 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
6893 echo "configure:6894: checking for pid_t" >&5
6894 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
6895 echo $ac_n "(cached) $ac_c" 1>&6
6897 cat > conftest.$ac_ext <<EOF
6898 #line 6899 "configure"
6899 #include "confdefs.h"
6900 #include <sys/types.h>
6906 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6907 egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
6909 ac_cv_type_pid_t=yes
6917 echo "$ac_t""$ac_cv_type_pid_t" 1>&6
6918 if test $ac_cv_type_pid_t = no; then
6919 cat >> confdefs.h <<\EOF
6925 echo $ac_n "checking for size_t""... $ac_c" 1>&6
6926 echo "configure:6927: checking for size_t" >&5
6927 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
6928 echo $ac_n "(cached) $ac_c" 1>&6
6930 cat > conftest.$ac_ext <<EOF
6931 #line 6932 "configure"
6932 #include "confdefs.h"
6933 #include <sys/types.h>
6939 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6940 egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
6942 ac_cv_type_size_t=yes
6945 ac_cv_type_size_t=no
6950 echo "$ac_t""$ac_cv_type_size_t" 1>&6
6951 if test $ac_cv_type_size_t = no; then
6952 cat >> confdefs.h <<\EOF
6953 #define size_t unsigned
6958 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
6959 echo "configure:6960: checking for uid_t in sys/types.h" >&5
6960 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
6961 echo $ac_n "(cached) $ac_c" 1>&6
6963 cat > conftest.$ac_ext <<EOF
6964 #line 6965 "configure"
6965 #include "confdefs.h"
6966 #include <sys/types.h>
6968 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6969 egrep "uid_t" >/dev/null 2>&1; then
6971 ac_cv_type_uid_t=yes
6980 echo "$ac_t""$ac_cv_type_uid_t" 1>&6
6981 if test $ac_cv_type_uid_t = no; then
6982 cat >> confdefs.h <<\EOF
6986 cat >> confdefs.h <<\EOF
6994 echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
6995 echo "configure:6996: checking for socklen_t" >&5
6996 if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
6997 echo $ac_n "(cached) $ac_c" 1>&6
6999 ac_cv_type_socklen_t=no
7000 cat > conftest.$ac_ext <<EOF
7001 #line 7002 "configure"
7002 #include "confdefs.h"
7003 #ifdef HAVE_SYS_TYPES_H
7004 #include <sys/types.h>
7006 #ifdef HAVE_SYS_SOCKET_H
7007 #include <sys/socket.h>
7014 if { (eval echo configure:7015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7016 ac_cv_type_socklen_t=yes
7018 echo "configure: failed program was:" >&5
7019 cat conftest.$ac_ext >&5
7026 echo "$ac_t""$ac_cv_type_socklen_t" 1>&6
7028 if test "$ac_cv_type_socklen_t" != "yes"; then
7029 cat >> confdefs.h <<\EOF
7030 #define socklen_t int
7037 echo $ac_n "checking for uint8_t""... $ac_c" 1>&6
7038 echo "configure:7039: checking for uint8_t" >&5
7039 if eval "test \"`echo '$''{'ac_cv_type_uint8_t'+set}'`\" = set"; then
7040 echo $ac_n "(cached) $ac_c" 1>&6
7042 ac_cv_type_uint8_t=no
7043 cat > conftest.$ac_ext <<EOF
7044 #line 7045 "configure"
7045 #include "confdefs.h"
7046 #ifdef HAVE_INTTYPES_H
7047 #include <inttypes.h>
7049 #ifdef HAVE_STDINT_H
7057 if { (eval echo configure:7058: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7059 ac_cv_type_uint8_t=yes
7061 echo "configure: failed program was:" >&5
7062 cat conftest.$ac_ext >&5
7069 echo "$ac_t""$ac_cv_type_uint8_t" 1>&6
7071 if test "$ac_cv_type_uint8_t" != "yes"; then
7072 cat >> confdefs.h <<\EOF
7073 #define uint8_t unsigned char
7080 echo $ac_n "checking for uint16_t""... $ac_c" 1>&6
7081 echo "configure:7082: checking for uint16_t" >&5
7082 if eval "test \"`echo '$''{'ac_cv_type_uint16_t'+set}'`\" = set"; then
7083 echo $ac_n "(cached) $ac_c" 1>&6
7085 ac_cv_type_uint16_t=no
7086 cat > conftest.$ac_ext <<EOF
7087 #line 7088 "configure"
7088 #include "confdefs.h"
7089 #ifdef HAVE_INTTYPES_H
7090 #include <inttypes.h>
7092 #ifdef HAVE_STDINT_H
7100 if { (eval echo configure:7101: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7102 ac_cv_type_uint16_t=yes
7104 echo "configure: failed program was:" >&5
7105 cat conftest.$ac_ext >&5
7112 echo "$ac_t""$ac_cv_type_uint16_t" 1>&6
7114 if test "$ac_cv_type_uint16_t" != "yes"; then
7115 cat >> confdefs.h <<\EOF
7116 #define uint16_t unsigned short
7123 echo $ac_n "checking for uint32_t""... $ac_c" 1>&6
7124 echo "configure:7125: checking for uint32_t" >&5
7125 if eval "test \"`echo '$''{'ac_cv_type_uint32_t'+set}'`\" = set"; then
7126 echo $ac_n "(cached) $ac_c" 1>&6
7128 ac_cv_type_uint32_t=no
7129 cat > conftest.$ac_ext <<EOF
7130 #line 7131 "configure"
7131 #include "confdefs.h"
7132 #ifdef HAVE_INTTYPES_H
7133 #include <inttypes.h>
7135 #ifdef HAVE_STDINT_H
7143 if { (eval echo configure:7144: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7145 ac_cv_type_uint32_t=yes
7147 echo "configure: failed program was:" >&5
7148 cat conftest.$ac_ext >&5
7155 echo "$ac_t""$ac_cv_type_uint32_t" 1>&6
7157 if test "$ac_cv_type_uint32_t" != "yes"; then
7158 cat >> confdefs.h <<\EOF
7159 #define uint32_t unsigned int
7188 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
7189 echo "configure:7190: checking for $ac_func" >&5
7190 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
7191 echo $ac_n "(cached) $ac_c" 1>&6
7193 cat > conftest.$ac_ext <<EOF
7194 #line 7195 "configure"
7195 #include "confdefs.h"
7196 /* System header to define __stub macros and hopefully few prototypes,
7197 which can conflict with char $ac_func(); below. */
7199 /* Override any gcc2 internal prototype to avoid an error. */
7200 /* We use char because int might match the return type of a gcc2
7201 builtin and then its argument prototype would still apply. */
7206 /* The GNU C library defines this for functions which it implements
7207 to always fail with ENOSYS. Some functions are actually named
7208 something starting with __ and the normal name is an alias. */
7209 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
7217 if { (eval echo configure:7218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7219 eval "ac_cv_func_$ac_func=yes"
7221 echo "configure: failed program was:" >&5
7222 cat conftest.$ac_ext >&5
7224 eval "ac_cv_func_$ac_func=no"
7229 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
7230 echo "$ac_t""yes" 1>&6
7231 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
7232 cat >> confdefs.h <<EOF
7233 #define $ac_tr_func 1
7237 echo "$ac_t""no" 1>&6
7252 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
7253 echo "configure:7254: checking whether $ac_func must be declared" >&5
7254 if eval "test \"`echo '$''{'radius_cv_decl_needed_$ac_func'+set}'`\" = set"; then
7255 echo $ac_n "(cached) $ac_c" 1>&6
7257 cat > conftest.$ac_ext <<EOF
7258 #line 7259 "configure"
7259 #include "confdefs.h"
7263 #ifdef HAVE_UNISTD_H
7272 #ifdef HAVE_RESOURCE_H
7273 #include <resource.h>
7275 #ifdef HAVE_GETOPT_H
7278 #ifdef HAVE_MALLOC_H
7287 #ifdef HAVE_SYS_SELECT_H
7288 #include <sys/select.h>
7296 #ifdef HAVE_SYSLOG_H
7299 #ifdef HAVE_INTTYPES_H
7300 #include <inttypes.h>
7302 #ifdef HAVE_STDINT_H
7305 #ifdef HAVE_ARPA_INET_H
7306 #include <arpa/inet.h>
7310 char *(*pfn) = (char *(*)) $ac_func
7313 if { (eval echo configure:7314: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7315 eval "radius_cv_decl_needed_$ac_func=no"
7317 echo "configure: failed program was:" >&5
7318 cat conftest.$ac_ext >&5
7320 eval "radius_cv_decl_needed_$ac_func=yes"
7325 if eval "test \"`echo '$radius_cv_decl_needed_'$ac_func`\" = yes"; then
7326 echo "$ac_t""yes" 1>&6
7327 radius_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
7328 cat >> confdefs.h <<EOF
7329 #define $radius_tr_decl 1
7333 echo "$ac_t""no" 1>&6
7339 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
7340 echo "configure:7341: checking return type of signal handlers" >&5
7341 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
7342 echo $ac_n "(cached) $ac_c" 1>&6
7344 cat > conftest.$ac_ext <<EOF
7345 #line 7346 "configure"
7346 #include "confdefs.h"
7347 #include <sys/types.h>
7353 extern "C" void (*signal (int, void (*)(int)))(int);
7355 void (*signal ()) ();
7362 if { (eval echo configure:7363: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7364 ac_cv_type_signal=void
7366 echo "configure: failed program was:" >&5
7367 cat conftest.$ac_ext >&5
7369 ac_cv_type_signal=int
7374 echo "$ac_t""$ac_cv_type_signal" 1>&6
7375 cat >> confdefs.h <<EOF
7376 #define RETSIGTYPE $ac_cv_type_signal
7381 if test "x$ac_cv_header_utmpx_h" = "xyes"
7384 echo $ac_n "checking for ut_xtime in struct utmpx""... $ac_c" 1>&6
7385 echo "configure:7386: checking for ut_xtime in struct utmpx" >&5
7388 cat > conftest.$ac_ext <<EOF
7389 #line 7390 "configure"
7390 #include "confdefs.h"
7394 #define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
7398 int foo = offsetof(struct utmpx, ut_xtime)
7401 if { (eval echo configure:7402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7405 echo "configure: failed program was:" >&5
7406 cat conftest.$ac_ext >&5
7412 ac_safe_type=`echo "struct utmpx" | sed 'y% %_%'`
7413 if test "x$has_element" != "x"; then
7414 echo "$ac_t""yes" 1>&6
7415 eval "ac_cv_type_${ac_safe_type}_has_ut_xtime=yes"
7417 echo "$ac_t""no" 1>&6
7418 eval "ac_cv_type_${ac_safe_type}_has_ut_xtime="
7421 if test "x$ac_cv_type_struct_utmpx_has_ut_xtime" = "x"
7423 cat >> confdefs.h <<\EOF
7424 #define ut_xtime ut_tv.tv_sec
7431 echo $ac_n "checking for working const""... $ac_c" 1>&6
7432 echo "configure:7433: checking for working const" >&5
7433 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
7434 echo $ac_n "(cached) $ac_c" 1>&6
7436 cat > conftest.$ac_ext <<EOF
7437 #line 7438 "configure"
7438 #include "confdefs.h"
7442 /* Ultrix mips cc rejects this. */
7443 typedef int charset[2]; const charset x;
7444 /* SunOS 4.1.1 cc rejects this. */
7445 char const *const *ccp;
7447 /* NEC SVR4.0.2 mips cc rejects this. */
7448 struct point {int x, y;};
7449 static struct point const zero = {0,0};
7450 /* AIX XL C 1.02.0.0 rejects this.
7451 It does not let you subtract one const X* pointer from another in an arm
7452 of an if-expression whose if-part is not a constant expression */
7453 const char *g = "string";
7454 ccp = &g + (g ? g-g : 0);
7455 /* HPUX 7.0 cc rejects these. */
7458 ccp = (char const *const *) p;
7459 { /* SCO 3.2v4 cc rejects this. */
7461 char const *s = 0 ? (char *) 0 : (char const *) 0;
7465 { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
7467 const int *foo = &x[0];
7470 { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
7471 typedef const int *iptr;
7475 { /* AIX XL C 1.02.0.0 rejects this saying
7476 "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
7477 struct s { int j; const int *ap[3]; };
7478 struct s *b; b->j = 5;
7480 { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
7486 if { (eval echo configure:7487: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7490 echo "configure: failed program was:" >&5
7491 cat conftest.$ac_ext >&5
7498 echo "$ac_t""$ac_cv_c_const" 1>&6
7499 if test $ac_cv_c_const = no; then
7500 cat >> confdefs.h <<\EOF
7507 echo $ac_n "checking type of OS""... $ac_c" 1>&6
7508 echo "configure:7509: checking type of OS" >&5
7510 echo "$ac_t""$OS" 1>&6
7511 if test "$OS" = "OS/2"; then
7518 if test "x$GCC" = "xyes"; then
7519 CFLAGS="$CFLAGS -Wall -D_GNU_SOURCE"
7522 echo $ac_n "checking for developer gcc flags""... $ac_c" 1>&6
7523 echo "configure:7524: checking for developer gcc flags" >&5
7524 if test "x$developer" = "xyes" -a "x$GCC" = "xyes"; then
7525 devflags="-g -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs"
7526 CFLAGS="$CFLAGS $devflags"
7528 echo "$ac_t""yes. Using $devflags" 1>&6
7531 CFLAGS="$CFLAGS -DNDEBUG"
7533 echo "$ac_t""no." 1>&6
7537 echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
7538 echo "configure:7539: checking for crypt in -lcrypt" >&5
7539 ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
7540 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
7541 echo $ac_n "(cached) $ac_c" 1>&6
7543 ac_save_LIBS="$LIBS"
7544 LIBS="-lcrypt $LIBS"
7545 cat > conftest.$ac_ext <<EOF
7546 #line 7547 "configure"
7547 #include "confdefs.h"
7548 /* Override any gcc2 internal prototype to avoid an error. */
7549 /* We use char because int might match the return type of a gcc2
7550 builtin and then its argument prototype would still apply. */
7557 if { (eval echo configure:7558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7559 eval "ac_cv_lib_$ac_lib_var=yes"
7561 echo "configure: failed program was:" >&5
7562 cat conftest.$ac_ext >&5
7564 eval "ac_cv_lib_$ac_lib_var=no"
7567 LIBS="$ac_save_LIBS"
7570 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
7571 echo "$ac_t""yes" 1>&6
7575 echo "$ac_t""no" 1>&6
7578 if test "$CRYPTLIB" != ""; then
7579 cat >> confdefs.h <<\EOF
7580 #define HAVE_CRYPT 1
7584 echo $ac_n "checking for crypt""... $ac_c" 1>&6
7585 echo "configure:7586: checking for crypt" >&5
7586 if eval "test \"`echo '$''{'ac_cv_func_crypt'+set}'`\" = set"; then
7587 echo $ac_n "(cached) $ac_c" 1>&6
7589 cat > conftest.$ac_ext <<EOF
7590 #line 7591 "configure"
7591 #include "confdefs.h"
7592 /* System header to define __stub macros and hopefully few prototypes,
7593 which can conflict with char crypt(); below. */
7595 /* Override any gcc2 internal prototype to avoid an error. */
7596 /* We use char because int might match the return type of a gcc2
7597 builtin and then its argument prototype would still apply. */
7602 /* The GNU C library defines this for functions which it implements
7603 to always fail with ENOSYS. Some functions are actually named
7604 something starting with __ and the normal name is an alias. */
7605 #if defined (__stub_crypt) || defined (__stub___crypt)
7613 if { (eval echo configure:7614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7615 eval "ac_cv_func_crypt=yes"
7617 echo "configure: failed program was:" >&5
7618 cat conftest.$ac_ext >&5
7620 eval "ac_cv_func_crypt=no"
7625 if eval "test \"`echo '$ac_cv_func_'crypt`\" = yes"; then
7626 echo "$ac_t""yes" 1>&6
7627 cat >> confdefs.h <<\EOF
7628 #define HAVE_CRYPT 1
7632 echo "$ac_t""no" 1>&6
7637 echo $ac_n "checking for setkey in -lcipher""... $ac_c" 1>&6
7638 echo "configure:7639: checking for setkey in -lcipher" >&5
7639 ac_lib_var=`echo cipher'_'setkey | sed 'y%./+-%__p_%'`
7640 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
7641 echo $ac_n "(cached) $ac_c" 1>&6
7643 ac_save_LIBS="$LIBS"
7644 LIBS="-lcipher $LIBS"
7645 cat > conftest.$ac_ext <<EOF
7646 #line 7647 "configure"
7647 #include "confdefs.h"
7648 /* Override any gcc2 internal prototype to avoid an error. */
7649 /* We use char because int might match the return type of a gcc2
7650 builtin and then its argument prototype would still apply. */
7657 if { (eval echo configure:7658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7659 eval "ac_cv_lib_$ac_lib_var=yes"
7661 echo "configure: failed program was:" >&5
7662 cat conftest.$ac_ext >&5
7664 eval "ac_cv_lib_$ac_lib_var=no"
7667 LIBS="$ac_save_LIBS"
7670 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
7671 echo "$ac_t""yes" 1>&6
7672 CRYPTLIB="${CRYPTLIB} -lcipher"
7675 echo "$ac_t""no" 1>&6
7680 if test "x$WITH_SNMP" = "xyes"; then
7685 echo $ac_n "checking for asn1.h,snmp.h,snmp_impl.h""... $ac_c" 1>&6
7686 echo "configure:7687: checking for asn1.h,snmp.h,snmp_impl.h" >&5
7688 cat > conftest.$ac_ext <<EOF
7689 #line 7690 "configure"
7690 #include "confdefs.h"
7692 #ifdef HAVE_SYS_TYPES_H
7693 #include <sys/types.h>
7695 #ifdef HAVE_STDINT_H
7704 #ifdef HAVE_UNISTD_H
7707 #include <ucd-snmp/asn1.h>
7708 #include <ucd-snmp/snmp.h>
7709 #include <ucd-snmp/snmp_impl.h>
7714 if { (eval echo configure:7715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7716 SNMP_INCLUDE="";ucdsnmp=yes
7718 echo "configure: failed program was:" >&5
7719 cat conftest.$ac_ext >&5
7725 if test "x$ucdsnmp" = "x"; then
7726 old_CFLAGS="$CFLAGS"
7727 for try in /usr/include /usr/local/include $snmp_include_dir; do
7728 CFLAGS="$old_CFLAGS -I$try"
7729 cat > conftest.$ac_ext <<EOF
7730 #line 7731 "configure"
7731 #include "confdefs.h"
7733 #ifdef HAVE_SYS_TYPES_H
7734 #include <sys/types.h>
7736 #ifdef HAVE_STDINT_H
7745 #ifdef HAVE_UNISTD_H
7748 #include <ucd-snmp/asn1.h>
7749 #include <ucd-snmp/snmp.h>
7750 #include <ucd-snmp/snmp_impl.h>
7755 if { (eval echo configure:7756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7757 SNMP_INCLUDE="-I$try";ucdsnmp=yes
7759 echo "configure: failed program was:" >&5
7760 cat conftest.$ac_ext >&5
7765 if test "x$ucdsnmp" != "x"; then
7769 CFLAGS="$old_CFLAGS"
7772 if test "x$ucdsnmp" = "x"; then
7773 old_CFLAGS="$CFLAGS"
7774 for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
7775 CFLAGS="$old_CFLAGS -I$try"
7776 cat > conftest.$ac_ext <<EOF
7777 #line 7778 "configure"
7778 #include "confdefs.h"
7780 #ifdef HAVE_SYS_TYPES_H
7781 #include <sys/types.h>
7783 #ifdef HAVE_STDINT_H
7792 #ifdef HAVE_UNISTD_H
7797 #include <snmp_impl.h>
7802 if { (eval echo configure:7803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7804 SNMP_INCLUDE="";ucdsnmp=no
7806 echo "configure: failed program was:" >&5
7807 cat conftest.$ac_ext >&5
7812 if test "x$ucdsnmp" != "x"; then
7816 CFLAGS="$old_CFLAGS"
7819 if test "x$ucdsnmp" = "x"; then
7820 old_CFLAGS="$CFLAGS"
7821 for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
7822 CFLAGS="$old_CFLAGS -I$try"
7823 cat > conftest.$ac_ext <<EOF
7824 #line 7825 "configure"
7825 #include "confdefs.h"
7827 #ifdef HAVE_SYS_TYPES_H
7828 #include <sys/types.h>
7830 #ifdef HAVE_STDINT_H
7839 #ifdef HAVE_UNISTD_H
7844 #include <snmp_impl.h>
7849 if { (eval echo configure:7850: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7851 SNMP_INCLUDE="-I$try";ucdsnmp=no
7853 echo "configure: failed program was:" >&5
7854 cat conftest.$ac_ext >&5
7859 if test "x$ucdsnmp" != "x"; then
7863 CFLAGS="$old_CFLAGS"
7866 if test "x$ucdsnmp" = "x"; then
7867 echo "$ac_t""no" 1>&6
7869 if test "x$ucdsnmp" = "xyes"; then
7870 echo "$ac_t""(ucd-snmp)yes" 1>&6
7871 cat >> confdefs.h <<\EOF
7872 #define HAVE_UCD_SNMP_ASN1_SNMP_SNMPIMPL_H 1
7876 echo "$ac_t""yes" 1>&6
7877 cat >> confdefs.h <<\EOF
7878 #define HAVE_ASN1_SNMP_SNMPIMPL_H 1
7882 echo $ac_n "checking for snmp_build_var_op in -lsnmp""... $ac_c" 1>&6
7883 echo "configure:7884: checking for snmp_build_var_op in -lsnmp" >&5
7886 LIBS="$old_LIBS -lsnmp"
7887 cat > conftest.$ac_ext <<EOF
7888 #line 7889 "configure"
7889 #include "confdefs.h"
7890 extern char snmp_build_var_op();
7895 if { (eval echo configure:7896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7899 echo "configure: failed program was:" >&5
7900 cat conftest.$ac_ext >&5
7906 if test "x$SNMP_LIBS" = "x"; then
7907 for try in /usr/lib /usr/local/lib /usr/local/snmp/lib $snmp_lib_dir; do
7908 LIBS="$old_LIBS -L$try -lsnmp"
7909 cat > conftest.$ac_ext <<EOF
7910 #line 7911 "configure"
7911 #include "confdefs.h"
7912 extern char snmp_build_var_op();
7917 if { (eval echo configure:7918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7919 SNMP_LIBS="-L$try -lsnmp"
7921 echo "configure: failed program was:" >&5
7922 cat conftest.$ac_ext >&5
7927 if test "x$SNMP_LIBS" != "x"; then
7930 LIBS="$old_LIBS -L$try -lsnmp -lcrypto"
7931 cat > conftest.$ac_ext <<EOF
7932 #line 7933 "configure"
7933 #include "confdefs.h"
7934 extern char snmp_build_var_op();
7939 if { (eval echo configure:7940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7941 SNMP_LIBS="-L$try -lsnmp -lcrypto"
7943 echo "configure: failed program was:" >&5
7944 cat conftest.$ac_ext >&5
7949 if test "x$SNMP_LIBS" != "x"; then
7956 CFLAGS="$old_CFLAGS"
7957 if test "x$SNMP_LIBS" = "x"; then
7958 echo "$ac_t""no" 1>&6
7961 echo "$ac_t""yes" 1>&6
7962 cat >> confdefs.h <<\EOF
7966 cat >> confdefs.h <<\EOF
7967 #define HAVE_LIBSNMP 1
7975 gethostbyaddrrstyle=""
7976 echo $ac_n "checking gethostbyaddr_r() syntax""... $ac_c" 1>&6
7977 echo "configure:7978: checking gethostbyaddr_r() syntax" >&5
7978 cat > conftest.$ac_ext <<EOF
7979 #line 7980 "configure"
7980 #include "confdefs.h"
7986 gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL, NULL)
7989 if { (eval echo configure:7990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7992 cat >> confdefs.h <<\EOF
7993 #define GETHOSTBYADDRRSTYLE GNUSTYLE
7996 gethostbyaddrrstyle=GNU
7999 echo "configure: failed program was:" >&5
8000 cat conftest.$ac_ext >&5
8003 if test "x$gethostbyaddrrstyle" = "x"; then
8004 cat > conftest.$ac_ext <<EOF
8005 #line 8006 "configure"
8006 #include "confdefs.h"
8012 gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL)
8015 if { (eval echo configure:8016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8018 cat >> confdefs.h <<\EOF
8019 #define GETHOSTBYADDRRSTYLE SYSVSTYLE
8022 gethostbyaddrrstyle=SYSV
8025 echo "configure: failed program was:" >&5
8026 cat conftest.$ac_ext >&5
8030 if test "x$gethostbyaddrrstyle" = "x"; then
8031 cat > conftest.$ac_ext <<EOF
8032 #line 8033 "configure"
8033 #include "confdefs.h"
8039 gethostbyaddr(NULL, 0, 0)
8042 if { (eval echo configure:8043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8045 cat >> confdefs.h <<\EOF
8046 #define GETHOSTBYADDRRSTYLE BSDSTYLE
8049 gethostbyaddrrstyle=BSD
8050 echo "configure: warning: ****** BSD Style gethostbyaddr might NOT be thread-safe! ****** " 1>&2
8053 echo "configure: failed program was:" >&5
8054 cat conftest.$ac_ext >&5
8059 if test "x$gethostbyaddrrstyle" = "x"; then
8060 echo "$ac_t""none! It must not exist, here." 1>&6
8062 echo "$ac_t""${gethostbyaddrrstyle}-style" 1>&6
8065 gethostbynamerstyle=""
8066 echo $ac_n "checking gethostbyname_r() syntax""... $ac_c" 1>&6
8067 echo "configure:8068: checking gethostbyname_r() syntax" >&5
8068 cat > conftest.$ac_ext <<EOF
8069 #line 8070 "configure"
8070 #include "confdefs.h"
8076 gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL)
8079 if { (eval echo configure:8080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8082 cat >> confdefs.h <<\EOF
8083 #define GETHOSTBYNAMERSTYLE GNUSTYLE
8086 gethostbynamerstyle=GNU
8089 echo "configure: failed program was:" >&5
8090 cat conftest.$ac_ext >&5
8093 if test "x$gethostbynamerstyle" = "x"; then
8094 cat > conftest.$ac_ext <<EOF
8095 #line 8096 "configure"
8096 #include "confdefs.h"
8102 gethostbyname_r(NULL, NULL, NULL, 0, NULL)
8105 if { (eval echo configure:8106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8108 cat >> confdefs.h <<\EOF
8109 #define GETHOSTBYNAMERSTYLE SYSVSTYLE
8112 gethostbynamerstyle=SYSV
8115 echo "configure: failed program was:" >&5
8116 cat conftest.$ac_ext >&5
8120 if test "x$gethostbynamerstyle" = "x"; then
8121 cat > conftest.$ac_ext <<EOF
8122 #line 8123 "configure"
8123 #include "confdefs.h"
8132 if { (eval echo configure:8133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8135 cat >> confdefs.h <<\EOF
8136 #define GETHOSTBYNAMERSTYLE BSDSTYLE
8139 gethostbynamerstyle=BSD
8140 echo "configure: warning: ****** BSD Style gethostbyname might NOT be thread-safe! ****** " 1>&2
8143 echo "configure: failed program was:" >&5
8144 cat conftest.$ac_ext >&5
8149 if test "x$gethostbynamerstyle" = "x"; then
8150 echo "$ac_t""none! It must not exist, here." 1>&6
8152 echo "$ac_t""${gethostbynamerstyle}-style" 1>&6
8155 if test x"$rad_enable_largefiles" = xyes ; then
8156 echo $ac_n "checking for largefile linkage""... $ac_c" 1>&6
8157 echo "configure:8158: checking for largefile linkage" >&5
8160 echo "$ac_t""no" 1>&6
8161 { echo "configure: error: AIX before 4.2 does not support large files" 1>&2; exit 1; }
8164 echo "$ac_t""ok" 1>&6
8165 LFS_CFLAGS="-D_LARGE_FILES"
8170 echo "$ac_t""ok" 1>&6
8171 LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
8176 echo "$ac_t""no" 1>&6
8177 { echo "configure: error: Large files not supported on this platform" 1>&2; exit 1; }
8180 echo "$ac_t""maybe" 1>&6
8181 LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
8184 cat >> confdefs.h <<\EOF
8185 #define _GNU_SOURCE 1
8190 echo "$ac_t""ok" 1>&6
8191 # Extract the first word of "getconf", so it can be a program name with args.
8192 set dummy getconf; ac_word=$2
8193 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
8194 echo "configure:8195: checking for $ac_word" >&5
8195 if eval "test \"`echo '$''{'ac_cv_path_GETCONF'+set}'`\" = set"; then
8196 echo $ac_n "(cached) $ac_c" 1>&6
8200 ac_cv_path_GETCONF="$GETCONF" # Let the user override the test with a path.
8203 ac_cv_path_GETCONF="$GETCONF" # Let the user override the test with a dos path.
8206 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
8208 for ac_dir in $ac_dummy; do
8209 test -z "$ac_dir" && ac_dir=.
8210 if test -f $ac_dir/$ac_word; then
8211 ac_cv_path_GETCONF="$ac_dir/$ac_word"
8219 GETCONF="$ac_cv_path_GETCONF"
8220 if test -n "$GETCONF"; then
8221 echo "$ac_t""$GETCONF" 1>&6
8223 echo "$ac_t""no" 1>&6
8226 if test -z "$GETCONF" ; then
8227 { echo "configure: error: getconf required to configure large file support" 1>&2; exit 1; }
8229 LFS_CFLAGS=`$GETCONF LFS_CFLAGS`
8230 LFS_LDFLAGS=`$GETCONF LFS_LDFLAGS`
8231 LFS_LIBS=`$GETCONF LFS_LIBS`
8234 echo "$ac_t""maybe" 1>&6
8235 LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
8248 echo "$ac_t""top_builddir=$top_builddir" 1>&6
8253 if test "x$INCLTDL" != "x";then
8254 INCLTDL='-I${top_builddir}/''libltdl'
8260 if test "x$EXPERIMENTAL" = "xyes"; then
8261 bar=`ls -1 src/modules/rlm_*/configure | sed 's%/configure%%'`
8262 mysubdirs=`echo $bar`
8264 for bar in `cat src/modules/stable`; do
8265 if test -f src/modules/$bar/configure; then
8266 mysubdirs="$mysubdirs src/modules/$bar"
8272 if test "x$EXPERIMENTAL" = "xyes"; then
8273 for foo in `ls -1 src/modules | grep rlm_`; do
8274 MODULES="$MODULES $foo"
8277 for foo in `cat src/modules/stable`; do
8278 MODULES="$MODULES $foo"
8282 subdirs="'libltdl' $mysubdirs"
8290 USE_SHARED_LIBS=$enable_shared
8292 USE_STATIC_LIBS=$enable_static
8301 cat > confcache <<\EOF
8302 # This file is a shell script that caches the results of configure
8303 # tests run on this system so they can be shared between configure
8304 # scripts and configure runs. It is not useful on other systems.
8305 # If it contains results you don't want to keep, you may remove or edit it.
8307 # By default, configure uses ./config.cache as the cache file,
8308 # creating it if it does not exist already. You can give configure
8309 # the --cache-file=FILE option to use a different cache file; that is
8310 # what configure does when it calls configure scripts in
8311 # subdirectories, so they share the cache.
8312 # Giving --cache-file=/dev/null disables caching, for debugging configure.
8313 # config.status only pays attention to the cache file if you give it the
8314 # --recheck option to rerun configure.
8317 # The following way of writing the cache mishandles newlines in values,
8318 # but we know of no workaround that is simple, portable, and efficient.
8319 # So, don't put newlines in cache variables' values.
8320 # Ultrix sh set writes to stderr and can't be redirected directly,
8321 # and sets the high bit in the cache file unless we assign to the vars.
8323 case `(ac_space=' '; set | grep ac_space) 2>&1` in
8325 # `set' does not quote correctly, so add quotes (double-quote substitution
8326 # turns \\\\ into \\, and sed turns \\ into \).
8328 -e "s/'/'\\\\''/g" \
8329 -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
8332 # `set' quotes correctly as required by POSIX, so do not add quotes.
8333 sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
8336 if cmp -s $cache_file confcache; then
8339 if test -w $cache_file; then
8340 echo "updating cache $cache_file"
8341 cat confcache > $cache_file
8343 echo "not updating unwritable cache $cache_file"
8348 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
8350 test "x$prefix" = xNONE && prefix=$ac_default_prefix
8351 # Let make expand exec_prefix.
8352 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
8354 # Any assignment to VPATH causes Sun make to only execute
8355 # the first set of double-colon rules, so remove it if not needed.
8356 # If there is a colon in the path, we need to keep it.
8357 if test "x$srcdir" = x.; then
8358 ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
8361 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
8363 DEFS=-DHAVE_CONFIG_H
8365 # Without the "./", some shells look in PATH for config.status.
8366 : ${CONFIG_STATUS=./config.status}
8368 echo creating $CONFIG_STATUS
8369 rm -f $CONFIG_STATUS
8370 cat > $CONFIG_STATUS <<EOF
8372 # Generated automatically by configure.
8373 # Run this file to recreate the current configuration.
8374 # This directory was configured as follows,
8375 # on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
8377 # $0 $ac_configure_args
8379 # Compiler output produced by configure, useful for debugging
8380 # configure, is in ./config.log if it exists.
8382 ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
8385 case "\$ac_option" in
8386 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
8387 echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
8388 exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
8389 -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
8390 echo "$CONFIG_STATUS generated by autoconf version 2.13"
8392 -help | --help | --hel | --he | --h)
8393 echo "\$ac_cs_usage"; exit 0 ;;
8394 *) echo "\$ac_cs_usage"; exit 1 ;;
8398 ac_given_srcdir=$srcdir
8400 trap 'rm -fr `echo "\
8402 ./src/include/build-radpaths-h \
8403 ./src/main/Makefile \
8404 ./src/main/checkrad.pl \
8405 ./src/main/radlast \
8406 ./src/main/radtest \
8407 ./scripts/rc.radiusd \
8408 ./scripts/radwatch \
8409 ./scripts/check-radiusd-config \
8410 ./scripts/radiusd.cron.daily \
8411 ./scripts/radiusd.cron.monthly \
8412 ./scripts/cryptpasswd \
8413 ./raddb/dictionary \
8414 ./raddb/radiusd.conf
8415 src/include/autoconf.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
8417 cat >> $CONFIG_STATUS <<EOF
8419 # Protect against being on the right side of a sed subst in config.status.
8420 sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
8421 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
8425 s%@CFLAGS@%$CFLAGS%g
8426 s%@CPPFLAGS@%$CPPFLAGS%g
8427 s%@CXXFLAGS@%$CXXFLAGS%g
8428 s%@FFLAGS@%$FFLAGS%g
8430 s%@LDFLAGS@%$LDFLAGS%g
8432 s%@exec_prefix@%$exec_prefix%g
8433 s%@prefix@%$prefix%g
8434 s%@program_transform_name@%$program_transform_name%g
8435 s%@bindir@%$bindir%g
8436 s%@sbindir@%$sbindir%g
8437 s%@libexecdir@%$libexecdir%g
8438 s%@datadir@%$datadir%g
8439 s%@sysconfdir@%$sysconfdir%g
8440 s%@sharedstatedir@%$sharedstatedir%g
8441 s%@localstatedir@%$localstatedir%g
8442 s%@libdir@%$libdir%g
8443 s%@includedir@%$includedir%g
8444 s%@oldincludedir@%$oldincludedir%g
8445 s%@infodir@%$infodir%g
8446 s%@mandir@%$mandir%g
8449 s%@RANLIB@%$RANLIB%g
8452 s%@subdirs@%$subdirs%g
8453 s%@LIBLTDLPATH@%$LIBLTDLPATH%g
8454 s%@LIBTOOL@%$LIBTOOL%g
8456 s%@host_alias@%$host_alias%g
8457 s%@host_cpu@%$host_cpu%g
8458 s%@host_vendor@%$host_vendor%g
8459 s%@host_os@%$host_os%g
8461 s%@build_alias@%$build_alias%g
8462 s%@build_cpu@%$build_cpu%g
8463 s%@build_vendor@%$build_vendor%g
8464 s%@build_os@%$build_os%g
8466 s%@OBJEXT@%$OBJEXT%g
8467 s%@EXEEXT@%$EXEEXT%g
8470 s%@logdir@%$logdir%g
8471 s%@radacctdir@%$radacctdir%g
8472 s%@raddbdir@%$raddbdir%g
8474 s%@SNMPGET@%$SNMPGET%g
8475 s%@SNMPWALK@%$SNMPWALK%g
8476 s%@RUSERS@%$RUSERS%g
8477 s%@ACLOCAL@%$ACLOCAL%g
8478 s%@AUTOCONF@%$AUTOCONF%g
8479 s%@AUTOHEADER@%$AUTOHEADER%g
8480 s%@LOCATE@%$LOCATE%g
8481 s%@DIRNAME@%$DIRNAME%g
8484 s%@REGEX_EXTENDED@%$REGEX_EXTENDED%g
8485 s%@LIBPREFIX@%$LIBPREFIX%g
8486 s%@CRYPTLIB@%$CRYPTLIB%g
8487 s%@SNMP_LIBS@%$SNMP_LIBS%g
8488 s%@SNMP_INCLUDE@%$SNMP_INCLUDE%g
8489 s%@GETCONF@%$GETCONF%g
8490 s%@LFS_CFLAGS@%$LFS_CFLAGS%g
8491 s%@LFS_LDFLAGS@%$LFS_LDFLAGS%g
8492 s%@LFS_LIBS@%$LFS_LIBS%g
8493 s%@top_builddir@%$top_builddir%g
8494 s%@LIBLTDL@%$LIBLTDL%g
8495 s%@INCLTDL@%$INCLTDL%g
8496 s%@MODULES@%$MODULES%g
8497 s%@INSTALLSTRIP@%$INSTALLSTRIP%g
8498 s%@USE_SHARED_LIBS@%$USE_SHARED_LIBS%g
8499 s%@USE_STATIC_LIBS@%$USE_STATIC_LIBS%g
8500 s%@STATIC_MODULES@%$STATIC_MODULES%g
8501 s%@RADIUSD_MAJOR_VERSION@%$RADIUSD_MAJOR_VERSION%g
8502 s%@RADIUSD_MINOR_VERSION@%$RADIUSD_MINOR_VERSION%g
8503 s%@RADIUSD_VERSION@%$RADIUSD_VERSION%g
8508 cat >> $CONFIG_STATUS <<\EOF
8510 # Split the substitutions into bite-sized pieces for seds with
8511 # small command number limits, like on Digital OSF/1 and HP-UX.
8512 ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
8513 ac_file=1 # Number of current file.
8514 ac_beg=1 # First line for current file.
8515 ac_end=$ac_max_sed_cmds # Line after last line for current file.
8518 while $ac_more_lines; do
8519 if test $ac_beg -gt 1; then
8520 sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
8522 sed "${ac_end}q" conftest.subs > conftest.s$ac_file
8524 if test ! -s conftest.s$ac_file; then
8526 rm -f conftest.s$ac_file
8528 if test -z "$ac_sed_cmds"; then
8529 ac_sed_cmds="sed -f conftest.s$ac_file"
8531 ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
8533 ac_file=`expr $ac_file + 1`
8535 ac_end=`expr $ac_end + $ac_max_sed_cmds`
8538 if test -z "$ac_sed_cmds"; then
8543 cat >> $CONFIG_STATUS <<EOF
8545 CONFIG_FILES=\${CONFIG_FILES-"\
8547 ./src/include/build-radpaths-h \
8548 ./src/main/Makefile \
8549 ./src/main/checkrad.pl \
8550 ./src/main/radlast \
8551 ./src/main/radtest \
8552 ./scripts/rc.radiusd \
8553 ./scripts/radwatch \
8554 ./scripts/check-radiusd-config \
8555 ./scripts/radiusd.cron.daily \
8556 ./scripts/radiusd.cron.monthly \
8557 ./scripts/cryptpasswd \
8558 ./raddb/dictionary \
8559 ./raddb/radiusd.conf
8562 cat >> $CONFIG_STATUS <<\EOF
8563 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
8564 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
8566 *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
8567 ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
8568 *) ac_file_in="${ac_file}.in" ;;
8571 # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
8573 # Remove last slash and all that follows it. Not all systems have dirname.
8574 ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
8575 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
8576 # The file is in a subdirectory.
8577 test ! -d "$ac_dir" && mkdir "$ac_dir"
8578 ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
8579 # A "../" for each directory in $ac_dir_suffix.
8580 ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
8582 ac_dir_suffix= ac_dots=
8585 case "$ac_given_srcdir" in
8587 if test -z "$ac_dots"; then top_srcdir=.
8588 else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
8589 /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
8591 srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
8592 top_srcdir="$ac_dots$ac_given_srcdir" ;;
8596 echo creating "$ac_file"
8598 configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
8600 *Makefile*) ac_comsub="1i\\
8601 # $configure_input" ;;
8605 ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
8607 s%@configure_input@%$configure_input%g
8608 s%@srcdir@%$srcdir%g
8609 s%@top_srcdir@%$top_srcdir%g
8610 " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
8614 # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
8615 # NAME is the cpp macro being defined and VALUE is the value it is being given.
8617 # ac_d sets the value in "#define NAME VALUE" lines.
8618 ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
8619 ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
8622 # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
8623 ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
8624 ac_uB='\([ ]\)%\1#\2define\3'
8627 # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
8628 ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
8629 ac_eB='$%\1#\2define\3'
8633 if test "${CONFIG_HEADERS+set}" != set; then
8635 cat >> $CONFIG_STATUS <<EOF
8636 CONFIG_HEADERS="src/include/autoconf.h"
8638 cat >> $CONFIG_STATUS <<\EOF
8640 for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
8641 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
8643 *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
8644 ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
8645 *) ac_file_in="${ac_file}.in" ;;
8648 echo creating $ac_file
8650 rm -f conftest.frag conftest.in conftest.out
8651 ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
8652 cat $ac_file_inputs > conftest.in
8656 # Transform confdefs.h into a sed script conftest.vals that substitutes
8657 # the proper values into config.h.in to produce config.h. And first:
8658 # Protect against being on the right side of a sed subst in config.status.
8659 # Protect against being in an unquoted here document in config.status.
8661 cat > conftest.hdr <<\EOF
8664 s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
8668 sed -n -f conftest.hdr confdefs.h > conftest.vals
8671 # This sed command replaces #undef with comments. This is necessary, for
8672 # example, in the case of _POSIX_SOURCE, which is predefined and required
8673 # on some systems where configure will not decide to define it.
8674 cat >> conftest.vals <<\EOF
8675 s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
8678 # Break up conftest.vals because some shells have a limit on
8679 # the size of here documents, and old seds have small limits too.
8684 ac_lines=`grep -c . conftest.vals`
8685 # grep -c gives empty output for an empty file on some AIX systems.
8686 if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
8687 # Write a limited-size here document to conftest.frag.
8688 echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
8689 sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
8691 sed -f conftest.frag conftest.in > conftest.out
8693 mv conftest.out conftest.in
8695 sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
8697 mv conftest.tail conftest.vals
8701 cat >> $CONFIG_STATUS <<\EOF
8702 rm -f conftest.frag conftest.h
8703 echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
8704 cat conftest.in >> conftest.h
8706 if cmp -s $ac_file conftest.h 2>/dev/null; then
8707 echo "$ac_file is unchanged"
8710 # Remove last slash and all that follows it. Not all systems have dirname.
8711 ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
8712 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
8713 # The file is in a subdirectory.
8714 test ! -d "$ac_dir" && mkdir "$ac_dir"
8717 mv conftest.h $ac_file
8722 cat >> $CONFIG_STATUS <<EOF
8725 cat >> $CONFIG_STATUS <<\EOF
8729 chmod +x $CONFIG_STATUS
8730 rm -fr confdefs* $ac_clean_files
8731 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
8733 if test "$no_recursion" != yes; then
8735 # Remove --cache-file and --srcdir arguments so they do not pile up.
8736 ac_sub_configure_args=
8738 for ac_arg in $ac_configure_args; do
8739 if test -n "$ac_prev"; then
8744 -cache-file | --cache-file | --cache-fil | --cache-fi \
8745 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
8746 ac_prev=cache_file ;;
8747 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
8748 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
8750 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
8752 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
8754 *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
8758 for ac_config_dir in 'libltdl' $mysubdirs; do
8760 # Do not complain, so a configure script can configure whichever
8761 # parts of a large source tree are present.
8762 if test ! -d $srcdir/$ac_config_dir; then
8766 echo configuring in $ac_config_dir
8771 if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
8773 { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
8781 # A "../" for each directory in /$ac_config_dir.
8782 ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
8785 .) # No --srcdir option. We are building in place.
8786 ac_sub_srcdir=$srcdir ;;
8787 /*) # Absolute path.
8788 ac_sub_srcdir=$srcdir/$ac_config_dir ;;
8790 ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
8793 # Check for guested configure; otherwise get Cygnus style configure.
8794 if test -f $ac_sub_srcdir/configure; then
8795 ac_sub_configure=$ac_sub_srcdir/configure
8796 elif test -f $ac_sub_srcdir/configure.in; then
8797 ac_sub_configure=$ac_configure
8799 echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
8803 # The recursion is here.
8804 if test -n "$ac_sub_configure"; then
8806 # Make the cache file name correct relative to the subdirectory.
8807 case "$cache_file" in
8808 /*) ac_sub_cache_file=$cache_file ;;
8810 ac_sub_cache_file="$ac_dots$cache_file" ;;
8813 echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
8814 # The eval makes quoting arguments work.
8815 if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
8818 { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
8832 echo timestamp > src/include/stamp-h
8833 (cd ./src/include && /bin/sh ./build-radpaths-h)
8834 (cd ./src/main && chmod +x checkrad.pl radlast radtest)
8835 (cd ./scripts && chmod +x rc.radiusd radwatch check-radiusd-config radiusd.cron.daily radiusd.cron.monthly cryptpasswd)
8837 cat >> src/include/autoconf.h <<EOF
8839 #define HOSTINFO "$host"
8840 #define RADIUSD_VERSION "$RADIUSD_VERSION"