3 # Guess values for system-dependent variables and create Makefiles.
4 # Generated automatically using autoconf version 2.13
5 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
7 # This configure script is free software; the Free Software Foundation
8 # gives unlimited permission to copy, distribute and modify it.
12 ac_default_prefix=/usr/local
13 # Any additions from configure.in:
15 --disable-ltdl-install do not install libltdl"
17 --with-ltdl-lib=DIR libltdl library is in DIR [default=${top_builddir}/libltdl/]"
19 --with-ltdl-include=DIR libltdl include files are in DIR [default=$top_srcdir/libltdl/]"
21 --with-system-libtool try to use libtool installed in your system [default=use our own]"
23 --enable-shared[=PKGS] build shared libraries [default=yes]"
25 --enable-static[=PKGS] build static libraries [default=yes]"
27 --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
29 --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
31 # Find the correct PATH separator. Usually this is `:', but
32 # DJGPP uses `;' like DOS.
33 if test "X${PATH_SEPARATOR+set}" != Xset; then
34 UNAME=${UNAME-`uname 2>/dev/null`}
36 *-DOS) lt_cv_sys_path_separator=';' ;;
37 *) lt_cv_sys_path_separator=':' ;;
39 PATH_SEPARATOR=$lt_cv_sys_path_separator
43 # Check that we are running under the correct shell.
44 SHELL=${CONFIG_SHELL-/bin/sh}
48 # Remove one level of quotation (which was required for Make).
49 ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
54 if test "X$1" = X--no-reexec; then
55 # Discard the --no-reexec flag, and continue.
57 elif test "X$1" = X--fallback-echo; then
58 # Avoid inline document here, it may be left over
60 elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
61 # Yippee, $echo works!
64 # Restart under the correct shell.
65 exec $SHELL "$0" --no-reexec ${1+"$@"}
68 if test "X$1" = X--fallback-echo; then
69 # used as fallback echo
77 # The HP-UX ksh and POSIX shell print the target directory to stdout
79 if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
81 if test -z "$ECHO"; then
82 if test "X${echo_test_string+set}" != Xset; then
83 # find a string as large as possible, as long as the shell can cope with it
84 for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
85 # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
86 if (echo_test_string="`eval $cmd`") 2>/dev/null &&
87 echo_test_string="`eval $cmd`" &&
88 (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
95 if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
96 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
97 test "X$echo_testing_string" = "X$echo_test_string"; then
100 # The Solaris, AIX, and Digital Unix default echo programs unquote
101 # backslashes. This makes it impossible to quote backslashes using
102 # echo "$something" | sed 's/\\/\\\\/g'
104 # So, first we look for a working echo in the user's PATH.
106 IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
107 for dir in $PATH /usr/ucb; do
108 if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
109 test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
110 echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
111 test "X$echo_testing_string" = "X$echo_test_string"; then
118 if test "X$echo" = Xecho; then
119 # We didn't find a better echo, so look for alternatives.
120 if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
121 echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
122 test "X$echo_testing_string" = "X$echo_test_string"; then
123 # This shell has a builtin print -r that does the trick.
125 elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
126 test "X$CONFIG_SHELL" != X/bin/ksh; then
127 # If we have ksh, try running configure again with it.
128 ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
129 export ORIGINAL_CONFIG_SHELL
130 CONFIG_SHELL=/bin/ksh
132 exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
136 if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
137 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
138 test "X$echo_testing_string" = "X$echo_test_string"; then
141 elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
142 test "X$echo_testing_string" = 'X\t' &&
143 echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
144 test "X$echo_testing_string" = "X$echo_test_string"; then
145 CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
147 SHELL="$CONFIG_SHELL"
149 echo="$CONFIG_SHELL $0 --fallback-echo"
150 elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
151 test "X$echo_testing_string" = 'X\t' &&
152 echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
153 test "X$echo_testing_string" = "X$echo_test_string"; then
154 echo="$CONFIG_SHELL $0 --fallback-echo"
156 # maybe with a smaller string...
159 for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
160 if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
167 if test "$prev" != 'sed 50q "$0"'; then
168 echo_test_string=`eval $prev`
169 export echo_test_string
170 exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
172 # Oops. We lost completely, so just stick with echo.
181 # Copy echo and quote the copy suitably for passing to libtool from
182 # the Makefile, instead of quoting the original, which is used later.
184 if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
185 ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
190 --disable-libtool-lock avoid locking (might break parallel builds)"
192 --with-pic try to use only PIC/non-PIC objects [default=use both]"
194 --enable-strict-dependencies Fail configure on lack of module dependancy."
196 --with-logdir=DIR Directory for logfiles [LOCALSTATEDIR/log/radius] "
198 --with-radacctdir=PATH Directory for detail files [LOGDIR/radacct] "
200 --with-raddbdir=DIR Directory for config files [SYSCONFDIR/raddb] "
202 --with-ascend-binary Include support for Ascend binary filter attributes (default=yes)"
204 --with-threads Use threads, if available. (default=yes) "
206 --with-snmp Compile in SNMP support. (default=yes)"
208 --with-large-files Compile in large (2G+) file support. (default=no)"
210 --with-static-modules=QUOTED-MODULE-LIST"
212 --enable-developer Enables features of interest to developers."
214 --with-experimental-modules Use experimental and unstable modules. (default=no) "
216 --with-openssl-includes=DIR Directory to look for OpenSSL include files"
218 --with-openssl-libraries=DIR Directory to look for OpenSSL library files"
220 --with-rlm-FOO-lib-dir=DIR Directory to look for library files used by module FOO"
222 --with-rlm-FOO-include-dir=DIR Directory to look for include files used by module FOO"
224 # Initialize some variables set by options.
225 # The variables have the same names as the options, with
226 # dashes changed to underlines.
228 cache_file=./config.cache
237 program_transform_name=s,x,x,
245 bindir='${exec_prefix}/bin'
246 sbindir='${exec_prefix}/sbin'
247 libexecdir='${exec_prefix}/libexec'
248 datadir='${prefix}/share'
249 sysconfdir='${prefix}/etc'
250 sharedstatedir='${prefix}/com'
251 localstatedir='${prefix}/var'
252 libdir='${exec_prefix}/lib'
253 includedir='${prefix}/include'
254 oldincludedir='/usr/include'
255 infodir='${prefix}/info'
256 mandir='${prefix}/man'
258 # Initialize some other variables.
261 SHELL=${CONFIG_SHELL-/bin/sh}
262 # Maximum number of lines to put in a shell here document.
269 # If the previous option needs an argument, assign it.
270 if test -n "$ac_prev"; then
271 eval "$ac_prev=\$ac_option"
277 -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
281 # Accept the important Cygnus configure options, so we can diagnose typos.
285 -bindir | --bindir | --bindi | --bind | --bin | --bi)
287 -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
288 bindir="$ac_optarg" ;;
290 -build | --build | --buil | --bui | --bu)
292 -build=* | --build=* | --buil=* | --bui=* | --bu=*)
293 build="$ac_optarg" ;;
295 -cache-file | --cache-file | --cache-fil | --cache-fi \
296 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
297 ac_prev=cache_file ;;
298 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
299 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
300 cache_file="$ac_optarg" ;;
302 -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
304 -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
306 datadir="$ac_optarg" ;;
308 -disable-* | --disable-*)
309 ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
310 # Reject names that are not valid shell variable names.
311 if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
312 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
314 ac_feature=`echo $ac_feature| sed 's/-/_/g'`
315 eval "enable_${ac_feature}=no" ;;
317 -enable-* | --enable-*)
318 ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
319 # Reject names that are not valid shell variable names.
320 if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
321 { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
323 ac_feature=`echo $ac_feature| sed 's/-/_/g'`
328 eval "enable_${ac_feature}='$ac_optarg'" ;;
330 -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
331 | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
332 | --exec | --exe | --ex)
333 ac_prev=exec_prefix ;;
334 -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
335 | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
336 | --exec=* | --exe=* | --ex=*)
337 exec_prefix="$ac_optarg" ;;
339 -gas | --gas | --ga | --g)
340 # Obsolete; use --with-gas.
343 -help | --help | --hel | --he)
344 # Omit some internal or obsolete options to make the list less imposing.
345 # This message is too long to be a string in the A/UX 3.1 sh.
347 Usage: configure [options] [host]
348 Options: [defaults in brackets after descriptions]
350 --cache-file=FILE cache test results in FILE
351 --help print this message
352 --no-create do not create output files
353 --quiet, --silent do not print \`checking...' messages
354 --version print the version of autoconf that created configure
355 Directory and file names:
356 --prefix=PREFIX install architecture-independent files in PREFIX
358 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
360 --bindir=DIR user executables in DIR [EPREFIX/bin]
361 --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
362 --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
363 --datadir=DIR read-only architecture-independent data in DIR
365 --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
366 --sharedstatedir=DIR modifiable architecture-independent data in DIR
368 --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
369 --libdir=DIR object code libraries in DIR [EPREFIX/lib]
370 --includedir=DIR C header files in DIR [PREFIX/include]
371 --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
372 --infodir=DIR info documentation in DIR [PREFIX/info]
373 --mandir=DIR man documentation in DIR [PREFIX/man]
374 --srcdir=DIR find the sources in DIR [configure dir or ..]
375 --program-prefix=PREFIX prepend PREFIX to installed program names
376 --program-suffix=SUFFIX append SUFFIX to installed program names
377 --program-transform-name=PROGRAM
378 run sed PROGRAM on installed program names
382 --build=BUILD configure for building on BUILD [BUILD=HOST]
383 --host=HOST configure for HOST [guessed]
384 --target=TARGET configure for TARGET [TARGET=HOST]
385 Features and packages:
386 --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
387 --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
388 --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
389 --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
390 --x-includes=DIR X include files are in DIR
391 --x-libraries=DIR X library files are in DIR
393 if test -n "$ac_help"; then
394 echo "--enable and --with options recognized:$ac_help"
398 -host | --host | --hos | --ho)
400 -host=* | --host=* | --hos=* | --ho=*)
403 -includedir | --includedir | --includedi | --included | --include \
404 | --includ | --inclu | --incl | --inc)
405 ac_prev=includedir ;;
406 -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
407 | --includ=* | --inclu=* | --incl=* | --inc=*)
408 includedir="$ac_optarg" ;;
410 -infodir | --infodir | --infodi | --infod | --info | --inf)
412 -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
413 infodir="$ac_optarg" ;;
415 -libdir | --libdir | --libdi | --libd)
417 -libdir=* | --libdir=* | --libdi=* | --libd=*)
418 libdir="$ac_optarg" ;;
420 -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
421 | --libexe | --libex | --libe)
422 ac_prev=libexecdir ;;
423 -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
424 | --libexe=* | --libex=* | --libe=*)
425 libexecdir="$ac_optarg" ;;
427 -localstatedir | --localstatedir | --localstatedi | --localstated \
428 | --localstate | --localstat | --localsta | --localst \
429 | --locals | --local | --loca | --loc | --lo)
430 ac_prev=localstatedir ;;
431 -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
432 | --localstate=* | --localstat=* | --localsta=* | --localst=* \
433 | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
434 localstatedir="$ac_optarg" ;;
436 -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
438 -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
439 mandir="$ac_optarg" ;;
442 # Obsolete; use --without-fp.
445 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
449 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
450 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
453 -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
454 | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
455 | --oldin | --oldi | --old | --ol | --o)
456 ac_prev=oldincludedir ;;
457 -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
458 | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
459 | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
460 oldincludedir="$ac_optarg" ;;
462 -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
464 -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
465 prefix="$ac_optarg" ;;
467 -program-prefix | --program-prefix | --program-prefi | --program-pref \
468 | --program-pre | --program-pr | --program-p)
469 ac_prev=program_prefix ;;
470 -program-prefix=* | --program-prefix=* | --program-prefi=* \
471 | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
472 program_prefix="$ac_optarg" ;;
474 -program-suffix | --program-suffix | --program-suffi | --program-suff \
475 | --program-suf | --program-su | --program-s)
476 ac_prev=program_suffix ;;
477 -program-suffix=* | --program-suffix=* | --program-suffi=* \
478 | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
479 program_suffix="$ac_optarg" ;;
481 -program-transform-name | --program-transform-name \
482 | --program-transform-nam | --program-transform-na \
483 | --program-transform-n | --program-transform- \
484 | --program-transform | --program-transfor \
485 | --program-transfo | --program-transf \
486 | --program-trans | --program-tran \
487 | --progr-tra | --program-tr | --program-t)
488 ac_prev=program_transform_name ;;
489 -program-transform-name=* | --program-transform-name=* \
490 | --program-transform-nam=* | --program-transform-na=* \
491 | --program-transform-n=* | --program-transform-=* \
492 | --program-transform=* | --program-transfor=* \
493 | --program-transfo=* | --program-transf=* \
494 | --program-trans=* | --program-tran=* \
495 | --progr-tra=* | --program-tr=* | --program-t=*)
496 program_transform_name="$ac_optarg" ;;
498 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
499 | -silent | --silent | --silen | --sile | --sil)
502 -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
504 -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
506 sbindir="$ac_optarg" ;;
508 -sharedstatedir | --sharedstatedir | --sharedstatedi \
509 | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
510 | --sharedst | --shareds | --shared | --share | --shar \
512 ac_prev=sharedstatedir ;;
513 -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
514 | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
515 | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
517 sharedstatedir="$ac_optarg" ;;
519 -site | --site | --sit)
521 -site=* | --site=* | --sit=*)
524 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
526 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
527 srcdir="$ac_optarg" ;;
529 -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
530 | --syscon | --sysco | --sysc | --sys | --sy)
531 ac_prev=sysconfdir ;;
532 -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
533 | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
534 sysconfdir="$ac_optarg" ;;
536 -target | --target | --targe | --targ | --tar | --ta | --t)
538 -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
539 target="$ac_optarg" ;;
541 -v | -verbose | --verbose | --verbos | --verbo | --verb)
544 -version | --version | --versio | --versi | --vers)
545 echo "configure generated by autoconf version 2.13"
549 ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
550 # Reject names that are not valid shell variable names.
551 if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
552 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
554 ac_package=`echo $ac_package| sed 's/-/_/g'`
559 eval "with_${ac_package}='$ac_optarg'" ;;
561 -without-* | --without-*)
562 ac_package=`echo $ac_option|sed -e 's/-*without-//'`
563 # Reject names that are not valid shell variable names.
564 if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
565 { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
567 ac_package=`echo $ac_package| sed 's/-/_/g'`
568 eval "with_${ac_package}=no" ;;
571 # Obsolete; use --with-x.
574 -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
575 | --x-incl | --x-inc | --x-in | --x-i)
576 ac_prev=x_includes ;;
577 -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
578 | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
579 x_includes="$ac_optarg" ;;
581 -x-libraries | --x-libraries | --x-librarie | --x-librari \
582 | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
583 ac_prev=x_libraries ;;
584 -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
585 | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
586 x_libraries="$ac_optarg" ;;
588 -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
592 if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
593 echo "configure: warning: $ac_option: invalid host type" 1>&2
595 if test "x$nonopt" != xNONE; then
596 { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
604 if test -n "$ac_prev"; then
605 { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
608 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
610 # File descriptor usage:
613 # 2 errors and warnings
614 # 3 some systems may open it to /dev/tty
615 # 4 used on the Kubota Titan
616 # 6 checking for... messages and results
617 # 5 compiler messages saved in config.log
618 if test "$silent" = yes; then
626 This file contains any messages produced by compilers while
627 running configure, to aid debugging if configure makes a mistake.
630 # Strip out --no-create and --no-recursion so they do not pile up.
631 # Also quote any args containing shell metacharacters.
636 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
637 | --no-cr | --no-c) ;;
638 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
639 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
640 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
641 ac_configure_args="$ac_configure_args '$ac_arg'" ;;
642 *) ac_configure_args="$ac_configure_args $ac_arg" ;;
647 # Only set these to C if already set. These must not be set unconditionally
648 # because not all systems understand e.g. LANG=C (notably SCO).
649 # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
650 # Non-C LC_CTYPE values break the ctype check.
651 if test "${LANG+set}" = set; then LANG=C; export LANG; fi
652 if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
653 if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
654 if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
656 # confdefs.h avoids OS command line length limits that DEFS can exceed.
657 rm -rf conftest* confdefs.h
658 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
661 # A filename unique to this package, relative to the directory that
662 # configure is in, which we can look for to find out if srcdir is correct.
663 ac_unique_file=src/main/radiusd.c
665 # Find the source files, if location was not specified.
666 if test -z "$srcdir"; then
667 ac_srcdir_defaulted=yes
668 # Try the directory containing this script, then its parent.
670 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
671 test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
673 if test ! -r $srcdir/$ac_unique_file; then
677 ac_srcdir_defaulted=no
679 if test ! -r $srcdir/$ac_unique_file; then
680 if test "$ac_srcdir_defaulted" = yes; then
681 { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
683 { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
686 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
688 # Prefer explicitly selected file to automatically selected ones.
689 if test -z "$CONFIG_SITE"; then
690 if test "x$prefix" != xNONE; then
691 CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
693 CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
696 for ac_site_file in $CONFIG_SITE; do
697 if test -r "$ac_site_file"; then
698 echo "loading site script $ac_site_file"
703 if test -r "$cache_file"; then
704 echo "loading cache $cache_file"
707 echo "creating cache $cache_file"
712 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
713 ac_cpp='$CPP $CPPFLAGS'
714 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
715 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
716 cross_compiling=$ac_cv_prog_cc_cross
720 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
721 # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
722 if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
729 ac_n= ac_c='\c' ac_t=
734 # From configure.in Revision: 1.184
735 RADIUSD_MAJOR_VERSION=1
736 RADIUSD_MINOR_VERSION=0.0-pre0
737 RADIUSD_VERSION="${RADIUSD_MAJOR_VERSION}.${RADIUSD_MINOR_VERSION}"
740 # Extract the first word of "gcc", so it can be a program name with args.
741 set dummy gcc; ac_word=$2
742 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
743 echo "configure:744: checking for $ac_word" >&5
744 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
745 echo $ac_n "(cached) $ac_c" 1>&6
747 if test -n "$CC"; then
748 ac_cv_prog_CC="$CC" # Let the user override the test.
750 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
752 for ac_dir in $ac_dummy; do
753 test -z "$ac_dir" && ac_dir=.
754 if test -f $ac_dir/$ac_word; then
763 if test -n "$CC"; then
764 echo "$ac_t""$CC" 1>&6
766 echo "$ac_t""no" 1>&6
769 if test -z "$CC"; then
770 # Extract the first word of "cc", so it can be a program name with args.
771 set dummy cc; ac_word=$2
772 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
773 echo "configure:774: checking for $ac_word" >&5
774 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
775 echo $ac_n "(cached) $ac_c" 1>&6
777 if test -n "$CC"; then
778 ac_cv_prog_CC="$CC" # Let the user override the test.
780 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
783 for ac_dir in $ac_dummy; do
784 test -z "$ac_dir" && ac_dir=.
785 if test -f $ac_dir/$ac_word; then
786 if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
795 if test $ac_prog_rejected = yes; then
796 # We found a bogon in the path, so make sure we never use it.
797 set dummy $ac_cv_prog_CC
799 if test $# -gt 0; then
800 # We chose a different compiler from the bogus one.
801 # However, it has the same basename, so the bogon will be chosen
802 # first if we set CC to just the basename; use the full file name.
804 set dummy "$ac_dir/$ac_word" "$@"
812 if test -n "$CC"; then
813 echo "$ac_t""$CC" 1>&6
815 echo "$ac_t""no" 1>&6
818 if test -z "$CC"; then
821 # Extract the first word of "cl", so it can be a program name with args.
822 set dummy cl; ac_word=$2
823 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
824 echo "configure:825: checking for $ac_word" >&5
825 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
826 echo $ac_n "(cached) $ac_c" 1>&6
828 if test -n "$CC"; then
829 ac_cv_prog_CC="$CC" # Let the user override the test.
831 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
833 for ac_dir in $ac_dummy; do
834 test -z "$ac_dir" && ac_dir=.
835 if test -f $ac_dir/$ac_word; then
844 if test -n "$CC"; then
845 echo "$ac_t""$CC" 1>&6
847 echo "$ac_t""no" 1>&6
852 test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
855 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
856 echo "configure:857: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
859 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
860 ac_cpp='$CPP $CPPFLAGS'
861 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
862 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
863 cross_compiling=$ac_cv_prog_cc_cross
865 cat > conftest.$ac_ext << EOF
867 #line 868 "configure"
868 #include "confdefs.h"
872 if { (eval echo configure:873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
873 ac_cv_prog_cc_works=yes
874 # If we can't run a trivial program, we are probably using a cross compiler.
875 if (./conftest; exit) 2>/dev/null; then
876 ac_cv_prog_cc_cross=no
878 ac_cv_prog_cc_cross=yes
881 echo "configure: failed program was:" >&5
882 cat conftest.$ac_ext >&5
883 ac_cv_prog_cc_works=no
887 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
888 ac_cpp='$CPP $CPPFLAGS'
889 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
890 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
891 cross_compiling=$ac_cv_prog_cc_cross
893 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
894 if test $ac_cv_prog_cc_works = no; then
895 { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
897 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
898 echo "configure:899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
899 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
900 cross_compiling=$ac_cv_prog_cc_cross
902 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
903 echo "configure:904: checking whether we are using GNU C" >&5
904 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
905 echo $ac_n "(cached) $ac_c" 1>&6
907 cat > conftest.c <<EOF
912 if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:913: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
919 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
921 if test $ac_cv_prog_gcc = yes; then
927 ac_test_CFLAGS="${CFLAGS+set}"
928 ac_save_CFLAGS="$CFLAGS"
930 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
931 echo "configure:932: checking whether ${CC-cc} accepts -g" >&5
932 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
933 echo $ac_n "(cached) $ac_c" 1>&6
935 echo 'void f(){}' > conftest.c
936 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
945 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
946 if test "$ac_test_CFLAGS" = set; then
947 CFLAGS="$ac_save_CFLAGS"
948 elif test $ac_cv_prog_cc_g = yes; then
949 if test "$GCC" = yes; then
955 if test "$GCC" = yes; then
962 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
963 echo "configure:964: checking how to run the C preprocessor" >&5
964 # On Suns, sometimes $CPP names a directory.
965 if test -n "$CPP" && test -d "$CPP"; then
968 if test -z "$CPP"; then
969 if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
970 echo $ac_n "(cached) $ac_c" 1>&6
972 # This must be in double quotes, not single quotes, because CPP may get
973 # substituted into the Makefile and "${CC-cc}" will confuse make.
975 # On the NeXT, cc -E runs the code through the compiler's parser,
976 # not just through cpp.
977 cat > conftest.$ac_ext <<EOF
978 #line 979 "configure"
979 #include "confdefs.h"
983 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
984 { (eval echo configure:985: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
985 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
986 if test -z "$ac_err"; then
990 echo "configure: failed program was:" >&5
991 cat conftest.$ac_ext >&5
993 CPP="${CC-cc} -E -traditional-cpp"
994 cat > conftest.$ac_ext <<EOF
995 #line 996 "configure"
996 #include "confdefs.h"
1000 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1001 { (eval echo configure:1002: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1002 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
1003 if test -z "$ac_err"; then
1007 echo "configure: failed program was:" >&5
1008 cat conftest.$ac_ext >&5
1010 CPP="${CC-cc} -nologo -E"
1011 cat > conftest.$ac_ext <<EOF
1012 #line 1013 "configure"
1013 #include "confdefs.h"
1017 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1018 { (eval echo configure:1019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1019 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
1020 if test -z "$ac_err"; then
1024 echo "configure: failed program was:" >&5
1025 cat conftest.$ac_ext >&5
1034 ac_cv_prog_CPP="$CPP"
1036 CPP="$ac_cv_prog_CPP"
1038 ac_cv_prog_CPP="$CPP"
1040 echo "$ac_t""$CPP" 1>&6
1042 if test $ac_cv_prog_gcc = yes; then
1043 echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
1044 echo "configure:1045: checking whether ${CC-cc} needs -traditional" >&5
1045 if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
1046 echo $ac_n "(cached) $ac_c" 1>&6
1048 ac_pattern="Autoconf.*'x'"
1049 cat > conftest.$ac_ext <<EOF
1050 #line 1051 "configure"
1051 #include "confdefs.h"
1055 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1056 egrep "$ac_pattern" >/dev/null 2>&1; then
1058 ac_cv_prog_gcc_traditional=yes
1061 ac_cv_prog_gcc_traditional=no
1066 if test $ac_cv_prog_gcc_traditional = no; then
1067 cat > conftest.$ac_ext <<EOF
1068 #line 1069 "configure"
1069 #include "confdefs.h"
1073 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1074 egrep "$ac_pattern" >/dev/null 2>&1; then
1076 ac_cv_prog_gcc_traditional=yes
1083 echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
1084 if test $ac_cv_prog_gcc_traditional = yes; then
1085 CC="$CC -traditional"
1089 echo $ac_n "checking whether we are using SUNPro C""... $ac_c" 1>&6
1090 echo "configure:1091: checking whether we are using SUNPro C" >&5
1091 if eval "test \"`echo '$''{'ac_cv_prog_suncc'+set}'`\" = set"; then
1092 echo $ac_n "(cached) $ac_c" 1>&6
1094 cat > conftest.c <<EOF
1099 if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1100: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
1100 ac_cv_prog_suncc=yes
1106 echo "$ac_t""$ac_cv_prog_suncc" 1>&6
1107 # Extract the first word of "ranlib", so it can be a program name with args.
1108 set dummy ranlib; ac_word=$2
1109 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1110 echo "configure:1111: checking for $ac_word" >&5
1111 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
1112 echo $ac_n "(cached) $ac_c" 1>&6
1114 if test -n "$RANLIB"; then
1115 ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
1117 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1119 for ac_dir in $ac_dummy; do
1120 test -z "$ac_dir" && ac_dir=.
1121 if test -f $ac_dir/$ac_word; then
1122 ac_cv_prog_RANLIB="ranlib"
1127 test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
1130 RANLIB="$ac_cv_prog_RANLIB"
1131 if test -n "$RANLIB"; then
1132 echo "$ac_t""$RANLIB" 1>&6
1134 echo "$ac_t""no" 1>&6
1141 echo $ac_n "checking for AIX""... $ac_c" 1>&6
1142 echo "configure:1143: checking for AIX" >&5
1143 cat > conftest.$ac_ext <<EOF
1144 #line 1145 "configure"
1145 #include "confdefs.h"
1151 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
1152 egrep "yes" >/dev/null 2>&1; then
1154 echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
1155 #define _ALL_SOURCE 1
1160 echo "$ac_t""no" 1>&6
1166 # Extract the first word of "gmake", so it can be a program name with args.
1167 set dummy gmake; ac_word=$2
1168 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1169 echo "configure:1170: checking for $ac_word" >&5
1170 if eval "test \"`echo '$''{'ac_cv_prog_GMAKE'+set}'`\" = set"; then
1171 echo $ac_n "(cached) $ac_c" 1>&6
1173 if test -n "$GMAKE"; then
1174 ac_cv_prog_GMAKE="$GMAKE" # Let the user override the test.
1176 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1178 for ac_dir in $ac_dummy; do
1179 test -z "$ac_dir" && ac_dir=.
1180 if test -f $ac_dir/$ac_word; then
1181 ac_cv_prog_GMAKE="yes"
1186 test -z "$ac_cv_prog_GMAKE" && ac_cv_prog_GMAKE="no"
1189 GMAKE="$ac_cv_prog_GMAKE"
1190 if test -n "$GMAKE"; then
1191 echo "$ac_t""$GMAKE" 1>&6
1193 echo "$ac_t""no" 1>&6
1196 if test $GMAKE = no; then
1197 # Extract the first word of "make", so it can be a program name with args.
1198 set dummy make; ac_word=$2
1199 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1200 echo "configure:1201: checking for $ac_word" >&5
1201 if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
1202 echo $ac_n "(cached) $ac_c" 1>&6
1206 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
1209 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a dos path.
1212 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1214 for ac_dir in $ac_dummy; do
1215 test -z "$ac_dir" && ac_dir=.
1216 if test -f $ac_dir/$ac_word; then
1217 ac_cv_path_MAKE="$ac_dir/$ac_word"
1222 test -z "$ac_cv_path_MAKE" && ac_cv_path_MAKE="/usr/local/bin/make"
1226 MAKE="$ac_cv_path_MAKE"
1227 if test -n "$MAKE"; then
1228 echo "$ac_t""$MAKE" 1>&6
1230 echo "$ac_t""no" 1>&6
1234 # Extract the first word of "gmake", so it can be a program name with args.
1235 set dummy gmake; ac_word=$2
1236 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
1237 echo "configure:1238: checking for $ac_word" >&5
1238 if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
1239 echo $ac_n "(cached) $ac_c" 1>&6
1243 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
1246 ac_cv_path_MAKE="$MAKE" # Let the user override the test with a dos path.
1249 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
1251 for ac_dir in $ac_dummy; do
1252 test -z "$ac_dir" && ac_dir=.
1253 if test -f $ac_dir/$ac_word; then
1254 ac_cv_path_MAKE="$ac_dir/$ac_word"
1259 test -z "$ac_cv_path_MAKE" && ac_cv_path_MAKE="/usr/local/gnu/bin/make"
1263 MAKE="$ac_cv_path_MAKE"
1264 if test -n "$MAKE"; then
1265 echo "$ac_t""$MAKE" 1>&6
1267 echo "$ac_t""no" 1>&6
1271 makever=`$ac_cv_path_MAKE --version 2>&1 | grep "GNU Make"`
1272 if test -z "$makever"; then
1273 { echo "configure: error: GNU Make is not installed. Please download and install it
1274 from ftp://prep.ai.mit.edu/pub/gnu/make/ before continuing." 1>&2; exit 1; }
1278 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
1279 if test -f $ac_dir/install-sh; then
1281 ac_install_sh="$ac_aux_dir/install-sh -c"
1283 elif test -f $ac_dir/install.sh; then
1285 ac_install_sh="$ac_aux_dir/install.sh -c"
1289 if test -z "$ac_aux_dir"; then
1290 { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
1292 ac_config_guess=$ac_aux_dir/config.guess
1293 ac_config_sub=$ac_aux_dir/config.sub
1294 ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
1296 # Check whether --enable-ltdl-install or --disable-ltdl-install was given.
1297 if test "${enable_ltdl_install+set}" = set; then
1298 enableval="$enable_ltdl_install"
1302 if test x"${enable_ltdl_install+set}" != xset; then
1303 enable_ltdl_install=yes
1304 ac_configure_args="$ac_configure_args --enable-ltdl-install"
1306 # Check whether --with-ltdl-lib or --without-ltdl-lib was given.
1307 if test "${with_ltdl_lib+set}" = set; then
1308 withval="$with_ltdl_lib"
1309 if test x"withval" = x"yes" || test x"withval" = x"no" ; then
1310 echo "configure: warning: specify location of libltdl library" 1>&2
1317 save_LDFLAGS="$LDFLAGS"
1318 test -z "$withval" || LDFLAGS="$LDFLAGS -L$withval"
1319 echo $ac_n "checking for lt_dlinit in -lltdl""... $ac_c" 1>&6
1320 echo "configure:1321: checking for lt_dlinit in -lltdl" >&5
1321 ac_lib_var=`echo ltdl'_'lt_dlinit | sed 'y%./+-%__p_%'`
1322 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
1323 echo $ac_n "(cached) $ac_c" 1>&6
1325 ac_save_LIBS="$LIBS"
1327 cat > conftest.$ac_ext <<EOF
1328 #line 1329 "configure"
1329 #include "confdefs.h"
1330 /* Override any gcc2 internal prototype to avoid an error. */
1331 /* We use char because int might match the return type of a gcc2
1332 builtin and then its argument prototype would still apply. */
1339 if { (eval echo configure:1340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
1341 eval "ac_cv_lib_$ac_lib_var=yes"
1343 echo "configure: failed program was:" >&5
1344 cat conftest.$ac_ext >&5
1346 eval "ac_cv_lib_$ac_lib_var=no"
1349 LIBS="$ac_save_LIBS"
1352 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
1353 echo "$ac_t""yes" 1>&6
1357 # Check whether --with-ltdl-include or --without-ltdl-include was given.
1358 if test "${with_ltdl_include+set}" = set; then
1359 withval="$with_ltdl_include"
1360 if test x"withval" = x"yes" || test x"withval" = x"no" ; then
1361 echo "configure: warning: specify location of ltdl.h" 1>&2
1364 save_CPPFLAGS="$CPPFLAGS"
1365 CPPFLAGS="$CPPFLAGS -I$withval"
1366 ac_safe=`echo "ltdl.h" | sed 'y%./+-%__p_%'`
1367 echo $ac_n "checking for ltdl.h""... $ac_c" 1>&6
1368 echo "configure:1369: checking for ltdl.h" >&5
1369 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
1370 echo $ac_n "(cached) $ac_c" 1>&6
1372 cat > conftest.$ac_ext <<EOF
1373 #line 1374 "configure"
1374 #include "confdefs.h"
1377 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
1378 { (eval echo configure:1379: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
1379 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
1380 if test -z "$ac_err"; then
1382 eval "ac_cv_header_$ac_safe=yes"
1385 echo "configure: failed program was:" >&5
1386 cat conftest.$ac_ext >&5
1388 eval "ac_cv_header_$ac_safe=no"
1392 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
1393 echo "$ac_t""yes" 1>&6
1395 INCLTDL="-I$withval"
1397 ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
1400 echo "$ac_t""no" 1>&6
1403 CPPFLAGS="$save_CPPFLAGS"
1409 echo "$ac_t""no" 1>&6
1412 LDFLAGS="$save_LDFLAGS"
1414 if test x"$enable_ltdl_install" = xno && test x"$ltdl_found" != xyes; then
1415 echo "configure: warning: libltdl not installed, but installation disabled" 1>&2
1417 if test x"$ltdl_found" = xyes; then
1418 enable_ltdl_install="no"
1421 if test x"$enable_ltdl_install" = x"yes"; then
1422 ac_configure_args="$ac_configure_args --enable-ltdl-install"
1423 LIBLTDL='${top_builddir}/''libltdl'/libltdl.la
1424 INCLTDL='-I${top_srcdir}/''libltdl'
1432 # Find the correct PATH separator. Usually this is `:', but
1433 # DJGPP uses `;' like DOS.
1434 if test "X${PATH_SEPARATOR+set}" != Xset; then
1435 UNAME=${UNAME-`uname 2>/dev/null`}
1437 *-DOS) lt_cv_sys_path_separator=';' ;;
1438 *) lt_cv_sys_path_separator=':' ;;
1440 PATH_SEPARATOR=$lt_cv_sys_path_separator
1443 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
1444 echo "configure:1445: checking for Cygwin environment" >&5
1445 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
1446 echo $ac_n "(cached) $ac_c" 1>&6
1448 cat > conftest.$ac_ext <<EOF
1449 #line 1450 "configure"
1450 #include "confdefs.h"
1455 #define __CYGWIN__ __CYGWIN32__
1460 if { (eval echo configure:1461: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1464 echo "configure: failed program was:" >&5
1465 cat conftest.$ac_ext >&5
1473 echo "$ac_t""$ac_cv_cygwin" 1>&6
1475 test "$ac_cv_cygwin" = yes && CYGWIN=yes
1476 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
1477 echo "configure:1478: checking for mingw32 environment" >&5
1478 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
1479 echo $ac_n "(cached) $ac_c" 1>&6
1481 cat > conftest.$ac_ext <<EOF
1482 #line 1483 "configure"
1483 #include "confdefs.h"
1489 if { (eval echo configure:1490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1493 echo "configure: failed program was:" >&5
1494 cat conftest.$ac_ext >&5
1502 echo "$ac_t""$ac_cv_mingw32" 1>&6
1504 test "$ac_cv_mingw32" = yes && MINGW32=yes
1505 # Check whether --enable-shared or --disable-shared was given.
1506 if test "${enable_shared+set}" = set; then
1507 enableval="$enable_shared"
1508 p=${PACKAGE-default}
1510 yes) enable_shared=yes ;;
1511 no) enable_shared=no ;;
1514 # Look at the argument we got. We use all the common list separators.
1515 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
1516 for pkg in $enableval; do
1517 if test "X$pkg" = "X$p"; then
1528 # Check whether --enable-static or --disable-static was given.
1529 if test "${enable_static+set}" = set; then
1530 enableval="$enable_static"
1531 p=${PACKAGE-default}
1533 yes) enable_static=yes ;;
1534 no) enable_static=no ;;
1537 # Look at the argument we got. We use all the common list separators.
1538 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
1539 for pkg in $enableval; do
1540 if test "X$pkg" = "X$p"; then
1551 # Check whether --enable-fast-install or --disable-fast-install was given.
1552 if test "${enable_fast_install+set}" = set; then
1553 enableval="$enable_fast_install"
1554 p=${PACKAGE-default}
1556 yes) enable_fast_install=yes ;;
1557 no) enable_fast_install=no ;;
1559 enable_fast_install=no
1560 # Look at the argument we got. We use all the common list separators.
1561 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
1562 for pkg in $enableval; do
1563 if test "X$pkg" = "X$p"; then
1564 enable_fast_install=yes
1571 enable_fast_install=yes
1575 # Make sure we can run config.sub.
1576 if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
1577 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
1580 echo $ac_n "checking host system type""... $ac_c" 1>&6
1581 echo "configure:1582: checking host system type" >&5
1584 case "$host_alias" in
1588 if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
1589 else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
1591 *) host_alias=$nonopt ;;
1595 host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
1596 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1597 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1598 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1599 echo "$ac_t""$host" 1>&6
1601 echo $ac_n "checking build system type""... $ac_c" 1>&6
1602 echo "configure:1603: checking build system type" >&5
1605 case "$build_alias" in
1608 NONE) build_alias=$host_alias ;;
1609 *) build_alias=$nonopt ;;
1613 build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
1614 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1615 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1616 build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1617 echo "$ac_t""$build" 1>&6
1619 # Check whether --with-gnu-ld or --without-gnu-ld was given.
1620 if test "${with_gnu_ld+set}" = set; then
1621 withval="$with_gnu_ld"
1622 test "$withval" = no || with_gnu_ld=yes
1628 if test "$GCC" = yes; then
1629 # Check if gcc -print-prog-name=ld gives a path.
1630 echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
1631 echo "configure:1632: checking for ld used by GCC" >&5
1634 # gcc leaves a trailing carriage return which upsets mingw
1635 ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
1637 ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
1640 # Accept absolute paths.
1641 [\\/]* | [A-Za-z]:[\\/]*)
1642 re_direlt='/[^/][^/]*/\.\./'
1643 # Canonicalize the path of ld
1644 ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
1645 while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
1646 ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
1648 test -z "$LD" && LD="$ac_prog"
1651 # If it fails, then pretend we aren't using GCC.
1655 # If it is relative, then search for the first ld in PATH.
1659 elif test "$with_gnu_ld" = yes; then
1660 echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
1661 echo "configure:1662: checking for GNU ld" >&5
1663 echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
1664 echo "configure:1665: checking for non-GNU ld" >&5
1666 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
1667 echo $ac_n "(cached) $ac_c" 1>&6
1669 if test -z "$LD"; then
1670 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
1671 for ac_dir in $PATH; do
1672 test -z "$ac_dir" && ac_dir=.
1673 if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
1674 lt_cv_path_LD="$ac_dir/$ac_prog"
1675 # Check to see if the program is GNU ld. I'd rather use --version,
1676 # but apparently some GNU ld's only accept -v.
1677 # Break only if it was the GNU/non-GNU ld that we prefer.
1678 if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
1679 test "$with_gnu_ld" != no && break
1681 test "$with_gnu_ld" != yes && break
1687 lt_cv_path_LD="$LD" # Let the user override the test with a path.
1692 if test -n "$LD"; then
1693 echo "$ac_t""$LD" 1>&6
1695 echo "$ac_t""no" 1>&6
1697 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
1698 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
1699 echo "configure:1700: checking if the linker ($LD) is GNU ld" >&5
1700 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
1701 echo $ac_n "(cached) $ac_c" 1>&6
1703 # I'd rather use --version here, but apparently some GNU ld's only accept -v.
1704 if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
1705 lt_cv_prog_gnu_ld=yes
1707 lt_cv_prog_gnu_ld=no
1711 echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
1712 with_gnu_ld=$lt_cv_prog_gnu_ld
1715 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
1716 echo "configure:1717: checking for $LD option to reload object files" >&5
1717 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
1718 echo $ac_n "(cached) $ac_c" 1>&6
1720 lt_cv_ld_reload_flag='-r'
1723 echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
1724 reload_flag=$lt_cv_ld_reload_flag
1725 test -n "$reload_flag" && reload_flag=" $reload_flag"
1727 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
1728 echo "configure:1729: checking for BSD-compatible nm" >&5
1729 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
1730 echo $ac_n "(cached) $ac_c" 1>&6
1732 if test -n "$NM"; then
1733 # Let the user override the test.
1736 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
1737 for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
1738 test -z "$ac_dir" && ac_dir=.
1739 tmp_nm=$ac_dir/${ac_tool_prefix}nm
1740 if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
1741 # Check to see if the nm accepts a BSD-compat flag.
1742 # Adding the `sed 1q' prevents false positives on HP-UX, which says:
1743 # nm: unknown option "B" ignored
1744 # Tru64's nm complains that /dev/null is an invalid object file
1745 if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
1746 lt_cv_path_NM="$tmp_nm -B"
1748 elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
1749 lt_cv_path_NM="$tmp_nm -p"
1752 lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
1753 continue # so that we can try to find one that supports BSD flags
1758 test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
1763 echo "$ac_t""$NM" 1>&6
1765 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
1766 echo "configure:1767: checking whether ln -s works" >&5
1767 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
1768 echo $ac_n "(cached) $ac_c" 1>&6
1771 if ln -s X conftestdata 2>/dev/null
1774 ac_cv_prog_LN_S="ln -s"
1779 LN_S="$ac_cv_prog_LN_S"
1780 if test "$ac_cv_prog_LN_S" = "ln -s"; then
1781 echo "$ac_t""yes" 1>&6
1783 echo "$ac_t""no" 1>&6
1786 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
1787 echo "configure:1788: checking how to recognise dependant libraries" >&5
1788 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
1789 echo $ac_n "(cached) $ac_c" 1>&6
1791 lt_cv_file_magic_cmd='$MAGIC_CMD'
1792 lt_cv_file_magic_test_file=
1793 lt_cv_deplibs_check_method='unknown'
1794 # Need to set the preceding variable on all platforms that support
1795 # interlibrary dependencies.
1796 # 'none' -- dependencies not supported.
1797 # `unknown' -- same as none, but documents that we really don't know.
1798 # 'pass_all' -- all dependencies passed with no checks.
1799 # 'test_compile' -- check by making test program.
1800 # 'file_magic [[regex]]' -- check by looking for files in library path
1801 # which responds to the $file_magic_cmd with a given egrep regex.
1802 # If you have `file' or equivalent on your system and you're not sure
1803 # whether `pass_all' will *always* work, you probably want this one.
1807 lt_cv_deplibs_check_method=pass_all
1811 lt_cv_deplibs_check_method=pass_all
1815 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
1816 lt_cv_file_magic_cmd='/usr/bin/file -L'
1817 lt_cv_file_magic_test_file=/shlib/libc.so
1820 cygwin* | mingw* | pw32*)
1821 lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
1822 lt_cv_file_magic_cmd='$OBJDUMP -f'
1825 darwin* | rhapsody*)
1826 lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
1827 lt_cv_file_magic_cmd='/usr/bin/file -L'
1829 rhapsody* | darwin1.[012])
1830 lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
1833 lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
1839 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
1842 # Not sure whether the presence of OpenBSD here was a mistake.
1843 # Let's accept both of them until this is cleared up.
1844 lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
1845 lt_cv_file_magic_cmd=/usr/bin/file
1846 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
1850 lt_cv_deplibs_check_method=pass_all
1855 lt_cv_deplibs_check_method=pass_all
1859 lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
1860 lt_cv_file_magic_cmd=/usr/bin/file
1861 lt_cv_file_magic_test_file=/usr/lib/libc.sl
1867 # this will be overridden with pass_all, but let us keep it just in case
1868 lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
1872 *-32|*"-32 ") libmagic=32-bit;;
1873 *-n32|*"-n32 ") libmagic=N32;;
1874 *-64|*"-64 ") libmagic=64-bit;;
1875 *) libmagic=never-match;;
1877 # this will be overridden with pass_all, but let us keep it just in case
1878 lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
1881 lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
1882 lt_cv_deplibs_check_method=pass_all
1885 # This must be Linux ELF.
1888 alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
1889 lt_cv_deplibs_check_method=pass_all ;;
1891 # glibc up to 2.1.1 does not perform some relocations on ARM
1892 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
1894 lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
1898 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
1899 lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
1901 lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
1906 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
1907 lt_cv_file_magic_cmd=/usr/bin/file
1908 lt_cv_file_magic_test_file=/usr/lib/libnls.so
1912 lt_cv_file_magic_cmd=/usr/bin/file
1913 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
1914 if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
1915 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
1917 lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
1921 osf3* | osf4* | osf5*)
1922 # this will be overridden with pass_all, but let us keep it just in case
1923 lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
1924 lt_cv_file_magic_test_file=/shlib/libc.so
1925 lt_cv_deplibs_check_method=pass_all
1929 lt_cv_deplibs_check_method=pass_all
1933 lt_cv_deplibs_check_method=pass_all
1934 lt_cv_file_magic_test_file=/lib/libc.so
1937 sysv5uw[78]* | sysv4*uw2*)
1938 lt_cv_deplibs_check_method=pass_all
1941 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
1942 case $host_vendor in
1944 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
1945 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
1948 lt_cv_deplibs_check_method=pass_all
1951 lt_cv_file_magic_cmd='/bin/file'
1952 lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
1955 lt_cv_file_magic_cmd='/bin/file'
1956 lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
1957 lt_cv_file_magic_test_file=/lib/libc.so
1965 echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
1966 file_magic_cmd=$lt_cv_file_magic_cmd
1967 deplibs_check_method=$lt_cv_deplibs_check_method
1969 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
1970 echo "configure:1971: checking for object suffix" >&5
1971 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
1972 echo $ac_n "(cached) $ac_c" 1>&6
1975 echo 'int i = 1;' > conftest.$ac_ext
1976 if { (eval echo configure:1977: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
1977 for ac_file in conftest.*; do
1980 *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
1984 { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
1989 echo "$ac_t""$ac_cv_objext" 1>&6
1990 OBJEXT=$ac_cv_objext
1991 ac_objext=$ac_cv_objext
1995 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
1996 echo "configure:1997: checking for executable suffix" >&5
1997 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
1998 echo $ac_n "(cached) $ac_c" 1>&6
2000 if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
2004 echo 'int main () { return 0; }' > conftest.$ac_ext
2006 if { (eval echo configure:2007: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
2007 for file in conftest.*; do
2009 *.c | *.o | *.obj) ;;
2010 *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
2014 { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
2017 test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
2022 test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
2023 echo "$ac_t""${ac_cv_exeext}" 1>&6
2026 if test $host != $build; then
2027 ac_tool_prefix=${host_alias}-
2035 # Check for command to grab the raw symbol name followed by C symbol from nm.
2036 echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
2037 echo "configure:2038: checking command to parse $NM output" >&5
2038 if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
2039 echo $ac_n "(cached) $ac_c" 1>&6
2042 # These are sane defaults that work on at least a few old systems.
2043 # [They come from Ultrix. What could be older than Ultrix?!! ;)]
2045 # Character class describing NM global symbol codes.
2046 symcode='[BCDEGRST]'
2048 # Regexp to match symbols that can be accessed directly from C.
2049 sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
2051 # Transform the above into a raw symbol and a C symbol.
2052 symxfrm='\1 \2\3 \3'
2054 # Transform an extracted symbol line into a proper C declaration
2055 lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
2057 # Transform an extracted symbol line into symbol name and symbol address
2058 lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
2060 # Define system-specific variables.
2065 cygwin* | mingw* | pw32*)
2066 symcode='[ABCDGISTW]'
2068 hpux*) # Its linker distinguishes data from code symbols
2069 lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
2070 lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
2073 symcode='[BCDEGRST]'
2083 # Handle CRLF in mingw tool chain
2087 opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
2091 # If we're using GNU nm, then use its standard symbol codes.
2092 if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
2093 symcode='[ABCDGISTW]'
2096 # Try without a prefix undercore, then with it.
2097 for ac_symprfx in "" "_"; do
2099 # Write the raw and C identifiers.
2100 lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
2102 # Check to see that the pipe works correctly.
2105 cat > conftest.$ac_ext <<EOF
2110 void nm_test_func(){}
2114 int main(){nm_test_var='a';nm_test_func();return(0);}
2117 if { (eval echo configure:2118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2118 # Now try to grab the symbols.
2120 if { (eval echo configure:2121: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
2121 # Try sorting and uniquifying the output.
2122 if sort "$nlist" | uniq > "$nlist"T; then
2123 mv -f "$nlist"T "$nlist"
2128 # Make sure that we snagged all the symbols we need.
2129 if egrep ' nm_test_var$' "$nlist" >/dev/null; then
2130 if egrep ' nm_test_func$' "$nlist" >/dev/null; then
2131 cat <<EOF > conftest.$ac_ext
2137 # Now generate the symbol file.
2138 eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
2140 cat <<EOF >> conftest.$ac_ext
2141 #if defined (__STDC__) && __STDC__
2142 # define lt_ptr void *
2144 # define lt_ptr char *
2148 /* The mapping between symbol names and symbols. */
2153 lt_preloaded_symbols[] =
2156 sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
2157 cat <<\EOF >> conftest.$ac_ext
2165 # Now try linking the two files.
2166 mv conftest.$ac_objext conftstm.$ac_objext
2168 save_CFLAGS="$CFLAGS"
2169 LIBS="conftstm.$ac_objext"
2170 CFLAGS="$CFLAGS$no_builtin_flag"
2171 if { (eval echo configure:2172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
2175 CFLAGS="$save_CFLAGS"
2177 echo "cannot find nm_test_func in $nlist" >&5
2180 echo "cannot find nm_test_var in $nlist" >&5
2183 echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
2186 echo "$progname: failed program was:" >&5
2187 cat conftest.$ac_ext >&5
2189 rm -f conftest* conftst*
2191 # Do not use the global_symbol_pipe unless it works.
2192 if test "$pipe_works" = yes; then
2195 lt_cv_sys_global_symbol_pipe=
2201 global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
2202 if test -z "$lt_cv_sys_global_symbol_pipe"; then
2203 global_symbol_to_cdecl=
2204 global_symbol_to_c_name_address=
2206 global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
2207 global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
2209 if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
2211 echo "$ac_t""failed" 1>&6
2213 echo "$ac_t""ok" 1>&6
2216 for ac_hdr in dlfcn.h
2218 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
2219 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
2220 echo "configure:2221: checking for $ac_hdr" >&5
2221 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
2222 echo $ac_n "(cached) $ac_c" 1>&6
2224 cat > conftest.$ac_ext <<EOF
2225 #line 2226 "configure"
2226 #include "confdefs.h"
2229 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
2230 { (eval echo configure:2231: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
2231 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
2232 if test -z "$ac_err"; then
2234 eval "ac_cv_header_$ac_safe=yes"
2237 echo "configure: failed program was:" >&5
2238 cat conftest.$ac_ext >&5
2240 eval "ac_cv_header_$ac_safe=no"
2244 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
2245 echo "$ac_t""yes" 1>&6
2246 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
2247 cat >> confdefs.h <<EOF
2248 #define $ac_tr_hdr 1
2252 echo "$ac_t""no" 1>&6
2260 # Only perform the check for file, if the check method requires it
2261 case $deplibs_check_method in
2263 if test "$file_magic_cmd" = '$MAGIC_CMD'; then
2264 echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
2265 echo "configure:2266: checking for ${ac_tool_prefix}file" >&5
2266 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
2267 echo $ac_n "(cached) $ac_c" 1>&6
2271 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
2274 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
2277 ac_save_MAGIC_CMD="$MAGIC_CMD"
2278 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2279 ac_dummy="/usr/bin:$PATH"
2280 for ac_dir in $ac_dummy; do
2281 test -z "$ac_dir" && ac_dir=.
2282 if test -f $ac_dir/${ac_tool_prefix}file; then
2283 lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
2284 if test -n "$file_magic_test_file"; then
2285 case $deplibs_check_method in
2287 file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
2288 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2289 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
2290 egrep "$file_magic_regex" > /dev/null; then
2295 *** Warning: the command libtool uses to detect shared libraries,
2296 *** $file_magic_cmd, produces output that libtool cannot recognize.
2297 *** The result is that libtool may fail to recognize shared libraries
2298 *** as such. This will affect the creation of libtool libraries that
2299 *** depend on shared libraries, but programs linked with such libtool
2300 *** libraries will work regardless of this problem. Nevertheless, you
2301 *** may want to report the problem to your system manager and/or to
2302 *** bug-libtool@gnu.org
2312 MAGIC_CMD="$ac_save_MAGIC_CMD"
2317 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2318 if test -n "$MAGIC_CMD"; then
2319 echo "$ac_t""$MAGIC_CMD" 1>&6
2321 echo "$ac_t""no" 1>&6
2324 if test -z "$lt_cv_path_MAGIC_CMD"; then
2325 if test -n "$ac_tool_prefix"; then
2326 echo $ac_n "checking for file""... $ac_c" 1>&6
2327 echo "configure:2328: checking for file" >&5
2328 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
2329 echo $ac_n "(cached) $ac_c" 1>&6
2333 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
2336 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
2339 ac_save_MAGIC_CMD="$MAGIC_CMD"
2340 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2341 ac_dummy="/usr/bin:$PATH"
2342 for ac_dir in $ac_dummy; do
2343 test -z "$ac_dir" && ac_dir=.
2344 if test -f $ac_dir/file; then
2345 lt_cv_path_MAGIC_CMD="$ac_dir/file"
2346 if test -n "$file_magic_test_file"; then
2347 case $deplibs_check_method in
2349 file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
2350 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2351 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
2352 egrep "$file_magic_regex" > /dev/null; then
2357 *** Warning: the command libtool uses to detect shared libraries,
2358 *** $file_magic_cmd, produces output that libtool cannot recognize.
2359 *** The result is that libtool may fail to recognize shared libraries
2360 *** as such. This will affect the creation of libtool libraries that
2361 *** depend on shared libraries, but programs linked with such libtool
2362 *** libraries will work regardless of this problem. Nevertheless, you
2363 *** may want to report the problem to your system manager and/or to
2364 *** bug-libtool@gnu.org
2374 MAGIC_CMD="$ac_save_MAGIC_CMD"
2379 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
2380 if test -n "$MAGIC_CMD"; then
2381 echo "$ac_t""$MAGIC_CMD" 1>&6
2383 echo "$ac_t""no" 1>&6
2395 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
2396 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
2397 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2398 echo "configure:2399: checking for $ac_word" >&5
2399 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
2400 echo $ac_n "(cached) $ac_c" 1>&6
2402 if test -n "$RANLIB"; then
2403 ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
2405 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2407 for ac_dir in $ac_dummy; do
2408 test -z "$ac_dir" && ac_dir=.
2409 if test -f $ac_dir/$ac_word; then
2410 ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
2417 RANLIB="$ac_cv_prog_RANLIB"
2418 if test -n "$RANLIB"; then
2419 echo "$ac_t""$RANLIB" 1>&6
2421 echo "$ac_t""no" 1>&6
2425 if test -z "$ac_cv_prog_RANLIB"; then
2426 if test -n "$ac_tool_prefix"; then
2427 # Extract the first word of "ranlib", so it can be a program name with args.
2428 set dummy ranlib; ac_word=$2
2429 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2430 echo "configure:2431: checking for $ac_word" >&5
2431 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
2432 echo $ac_n "(cached) $ac_c" 1>&6
2434 if test -n "$RANLIB"; then
2435 ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
2437 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2439 for ac_dir in $ac_dummy; do
2440 test -z "$ac_dir" && ac_dir=.
2441 if test -f $ac_dir/$ac_word; then
2442 ac_cv_prog_RANLIB="ranlib"
2447 test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
2450 RANLIB="$ac_cv_prog_RANLIB"
2451 if test -n "$RANLIB"; then
2452 echo "$ac_t""$RANLIB" 1>&6
2454 echo "$ac_t""no" 1>&6
2462 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
2463 set dummy ${ac_tool_prefix}strip; ac_word=$2
2464 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2465 echo "configure:2466: checking for $ac_word" >&5
2466 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
2467 echo $ac_n "(cached) $ac_c" 1>&6
2469 if test -n "$STRIP"; then
2470 ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
2472 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2474 for ac_dir in $ac_dummy; do
2475 test -z "$ac_dir" && ac_dir=.
2476 if test -f $ac_dir/$ac_word; then
2477 ac_cv_prog_STRIP="${ac_tool_prefix}strip"
2484 STRIP="$ac_cv_prog_STRIP"
2485 if test -n "$STRIP"; then
2486 echo "$ac_t""$STRIP" 1>&6
2488 echo "$ac_t""no" 1>&6
2492 if test -z "$ac_cv_prog_STRIP"; then
2493 if test -n "$ac_tool_prefix"; then
2494 # Extract the first word of "strip", so it can be a program name with args.
2495 set dummy strip; ac_word=$2
2496 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
2497 echo "configure:2498: checking for $ac_word" >&5
2498 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
2499 echo $ac_n "(cached) $ac_c" 1>&6
2501 if test -n "$STRIP"; then
2502 ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
2504 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
2506 for ac_dir in $ac_dummy; do
2507 test -z "$ac_dir" && ac_dir=.
2508 if test -f $ac_dir/$ac_word; then
2509 ac_cv_prog_STRIP="strip"
2514 test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
2517 STRIP="$ac_cv_prog_STRIP"
2518 if test -n "$STRIP"; then
2519 echo "$ac_t""$STRIP" 1>&6
2521 echo "$ac_t""no" 1>&6
2533 # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
2534 if test "${enable_libtool_lock+set}" = set; then
2535 enableval="$enable_libtool_lock"
2539 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
2541 # Some flags need to be propagated to the compiler or linker for good
2545 # Find out which ABI we are using.
2546 echo '#line 2547 "configure"' > conftest.$ac_ext
2547 if { (eval echo configure:2548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2548 case `/usr/bin/file conftest.$ac_objext` in
2564 # On SCO OpenServer 5, we need -belf to get full-featured binaries.
2565 SAVE_CFLAGS="$CFLAGS"
2566 CFLAGS="$CFLAGS -belf"
2567 echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
2568 echo "configure:2569: checking whether the C compiler needs -belf" >&5
2569 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
2570 echo $ac_n "(cached) $ac_c" 1>&6
2574 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
2575 ac_cpp='$CPP $CPPFLAGS'
2576 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
2577 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
2578 cross_compiling=$ac_cv_prog_cc_cross
2580 cat > conftest.$ac_ext <<EOF
2581 #line 2582 "configure"
2582 #include "confdefs.h"
2588 if { (eval echo configure:2589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
2590 lt_cv_cc_needs_belf=yes
2592 echo "configure: failed program was:" >&5
2593 cat conftest.$ac_ext >&5
2595 lt_cv_cc_needs_belf=no
2599 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
2600 ac_cpp='$CPP $CPPFLAGS'
2601 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
2602 ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
2603 cross_compiling=$ac_cv_prog_cc_cross
2607 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
2608 if test x"$lt_cv_cc_needs_belf" != x"yes"; then
2609 # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
2610 CFLAGS="$SAVE_CFLAGS"
2617 # Sed substitution that helps us do robust quoting. It backslashifies
2618 # metacharacters that are still active within double-quoted strings.
2619 Xsed='sed -e s/^X//'
2620 sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
2622 # Same as above, but do not quote variable references.
2623 double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
2625 # Sed substitution to delay expansion of an escaped shell variable in a
2626 # double_quote_subst'ed string.
2627 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
2633 default_ofile=libtool
2634 can_build_shared=yes
2636 # All known linkers require a `.a' archive for static linking (except M$VC,
2637 # which needs '.lib').
2639 ltmain="$ac_aux_dir/ltmain.sh"
2640 ofile="$default_ofile"
2641 with_gnu_ld="$lt_cv_prog_gnu_ld"
2642 need_locks="$enable_libtool_lock"
2645 old_CFLAGS="$CFLAGS"
2647 # Set sane defaults for various variables
2648 test -z "$AR" && AR=ar
2649 test -z "$AR_FLAGS" && AR_FLAGS=cru
2650 test -z "$AS" && AS=as
2651 test -z "$CC" && CC=cc
2652 test -z "$DLLTOOL" && DLLTOOL=dlltool
2653 test -z "$LD" && LD=ld
2654 test -z "$LN_S" && LN_S="ln -s"
2655 test -z "$MAGIC_CMD" && MAGIC_CMD=file
2656 test -z "$NM" && NM=nm
2657 test -z "$OBJDUMP" && OBJDUMP=objdump
2658 test -z "$RANLIB" && RANLIB=:
2659 test -z "$STRIP" && STRIP=:
2660 test -z "$ac_objext" && ac_objext=o
2662 if test x"$host" != x"$build"; then
2663 ac_tool_prefix=${host_alias}-
2668 # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
2671 linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
2676 # AIX sometimes has problems with the GCC collect2 program. For some
2677 # reason, if we set the COLLECT_NAMES environment variable, the problems
2678 # vanish in a puff of smoke.
2679 if test "X${COLLECT_NAMES+set}" != Xset; then
2681 export COLLECT_NAMES
2686 # Determine commands to create old-style static archives.
2687 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
2688 old_postinstall_cmds='chmod 644 $oldlib'
2689 old_postuninstall_cmds=
2691 if test -n "$RANLIB"; then
2694 old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
2697 old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
2700 old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
2703 # Allow CC to be a program name with arguments.
2707 ## FIXME: this should be a separate macro
2709 echo $ac_n "checking for objdir""... $ac_c" 1>&6
2710 echo "configure:2711: checking for objdir" >&5
2711 rm -f .libs 2>/dev/null
2712 mkdir .libs 2>/dev/null
2713 if test -d .libs; then
2716 # MS-DOS does not allow filenames that begin with a dot.
2719 rmdir .libs 2>/dev/null
2720 echo "$ac_t""$objdir" 1>&6
2725 ## FIXME: this should be a separate macro
2727 # Check whether --with-pic or --without-pic was given.
2728 if test "${with_pic+set}" = set; then
2735 test -z "$pic_mode" && pic_mode=default
2737 # We assume here that the value for lt_cv_prog_cc_pic will not be cached
2738 # in isolation, and that seeing it set (from the cache) indicates that
2739 # the associated values are set (in the cache) correctly too.
2740 echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
2741 echo "configure:2742: checking for $compiler option to produce PIC" >&5
2742 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
2743 echo $ac_n "(cached) $ac_c" 1>&6
2746 lt_cv_prog_cc_shlib=
2748 lt_cv_prog_cc_static=
2749 lt_cv_prog_cc_no_builtin=
2750 lt_cv_prog_cc_can_build_shared=$can_build_shared
2752 if test "$GCC" = yes; then
2753 lt_cv_prog_cc_wl='-Wl,'
2754 lt_cv_prog_cc_static='-static'
2758 # Below there is a dirty hack to force normal static linking with -ldl
2759 # The problem is because libdl dynamically linked with both libc and
2760 # libC (AIX C++ library), which obviously doesn't included in libraries
2761 # list by gcc. This cause undefined symbols with -static flags.
2762 # This hack allows C programs to be linked with "-static -ldl", but
2763 # not sure about C++ programs.
2764 lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
2767 # FIXME: we need at least 68020 code to build shared libraries, but
2768 # adding the `-m68020' flag to GCC prevents building anything better,
2770 lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
2772 beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
2773 # PIC is the default for these OSes.
2775 darwin* | rhapsody*)
2776 # PIC is the default on this platform
2777 # Common symbols not allowed in MH_DYLIB files
2778 lt_cv_prog_cc_pic='-fno-common'
2780 cygwin* | mingw* | pw32* | os2*)
2781 # This hack is so that the source file can tell whether it is being
2782 # built for inclusion in a dll (and should export symbols for example).
2783 lt_cv_prog_cc_pic='-DDLL_EXPORT'
2786 if test -d /usr/nec; then
2787 lt_cv_prog_cc_pic=-Kconform_pic
2791 lt_cv_prog_cc_pic='-fPIC'
2795 # PORTME Check for PIC flags for the system compiler.
2797 aix3* | aix4* | aix5*)
2798 lt_cv_prog_cc_wl='-Wl,'
2799 # All AIX code is PIC.
2800 if test "$host_cpu" = ia64; then
2801 # AIX 5 now supports IA64 processor
2802 lt_cv_prog_cc_static='-Bstatic'
2804 lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
2808 hpux9* | hpux10* | hpux11*)
2809 # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
2810 lt_cv_prog_cc_wl='-Wl,'
2811 lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
2812 lt_cv_prog_cc_pic='+Z'
2816 lt_cv_prog_cc_wl='-Wl,'
2817 lt_cv_prog_cc_static='-non_shared'
2818 # PIC (with -KPIC) is the default.
2821 cygwin* | mingw* | pw32* | os2*)
2822 # This hack is so that the source file can tell whether it is being
2823 # built for inclusion in a dll (and should export symbols for example).
2824 lt_cv_prog_cc_pic='-DDLL_EXPORT'
2828 lt_cv_prog_cc_pic='-KPIC'
2829 lt_cv_prog_cc_static='-Bstatic'
2832 osf3* | osf4* | osf5*)
2833 # All OSF/1 code is PIC.
2834 lt_cv_prog_cc_wl='-Wl,'
2835 lt_cv_prog_cc_static='-non_shared'
2839 lt_cv_prog_cc_pic='-Kpic'
2840 lt_cv_prog_cc_static='-dn'
2841 lt_cv_prog_cc_shlib='-belf'
2845 lt_cv_prog_cc_pic='-KPIC'
2846 lt_cv_prog_cc_static='-Bstatic'
2847 lt_cv_prog_cc_wl='-Wl,'
2851 lt_cv_prog_cc_pic='-PIC'
2852 lt_cv_prog_cc_static='-Bstatic'
2853 lt_cv_prog_cc_wl='-Qoption ld '
2856 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
2857 lt_cv_prog_cc_pic='-KPIC'
2858 lt_cv_prog_cc_static='-Bstatic'
2859 if test "x$host_vendor" = xsni; then
2860 lt_cv_prog_cc_wl='-LD'
2862 lt_cv_prog_cc_wl='-Wl,'
2867 lt_cv_prog_cc_pic='-pic'
2868 lt_cv_prog_cc_static='-Bstatic'
2872 if test -d /usr/nec ;then
2873 lt_cv_prog_cc_pic='-Kconform_pic'
2874 lt_cv_prog_cc_static='-Bstatic'
2879 lt_cv_prog_cc_can_build_shared=no
2886 if test -z "$lt_cv_prog_cc_pic"; then
2887 echo "$ac_t""none" 1>&6
2889 echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
2891 # Check to make sure the pic_flag actually works.
2892 echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
2893 echo "configure:2894: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
2894 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
2895 echo $ac_n "(cached) $ac_c" 1>&6
2897 save_CFLAGS="$CFLAGS"
2898 CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
2899 cat > conftest.$ac_ext <<EOF
2900 #line 2901 "configure"
2901 #include "confdefs.h"
2907 if { (eval echo configure:2908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
2910 hpux9* | hpux10* | hpux11*)
2911 # On HP-UX, both CC and GCC only warn that PIC is supported... then
2912 # they create non-PIC objects. So, if there were any warnings, we
2913 # assume that PIC is not supported.
2914 if test -s conftest.err; then
2915 lt_cv_prog_cc_pic_works=no
2917 lt_cv_prog_cc_pic_works=yes
2921 lt_cv_prog_cc_pic_works=yes
2926 echo "configure: failed program was:" >&5
2927 cat conftest.$ac_ext >&5
2929 lt_cv_prog_cc_pic_works=no
2933 CFLAGS="$save_CFLAGS"
2938 if test "X$lt_cv_prog_cc_pic_works" = Xno; then
2940 lt_cv_prog_cc_can_build_shared=no
2942 lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
2945 echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
2950 # Check for any special shared library compilation flags.
2951 if test -n "$lt_cv_prog_cc_shlib"; then
2952 echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
2953 if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
2955 echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
2956 lt_cv_prog_cc_can_build_shared=no
2960 ## FIXME: this should be a separate macro
2962 echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
2963 echo "configure:2964: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
2964 if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
2965 echo $ac_n "(cached) $ac_c" 1>&6
2967 lt_cv_prog_cc_static_works=no
2968 save_LDFLAGS="$LDFLAGS"
2969 LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
2970 cat > conftest.$ac_ext <<EOF
2971 #line 2972 "configure"
2972 #include "confdefs.h"
2978 if { (eval echo configure:2979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
2980 lt_cv_prog_cc_static_works=yes
2982 echo "configure: failed program was:" >&5
2983 cat conftest.$ac_ext >&5
2986 LDFLAGS="$save_LDFLAGS"
2991 # Belt *and* braces to stop my trousers falling down:
2992 test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
2993 echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
2995 pic_flag="$lt_cv_prog_cc_pic"
2996 special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
2997 wl="$lt_cv_prog_cc_wl"
2998 link_static_flag="$lt_cv_prog_cc_static"
2999 no_builtin_flag="$lt_cv_prog_cc_no_builtin"
3000 can_build_shared="$lt_cv_prog_cc_can_build_shared"
3005 ## FIXME: this should be a separate macro
3007 # Check to see if options -o and -c are simultaneously supported by compiler
3008 echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
3009 echo "configure:3010: checking if $compiler supports -c -o file.$ac_objext" >&5
3010 if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
3011 echo $ac_n "(cached) $ac_c" 1>&6
3014 $rm -r conftest 2>/dev/null
3017 echo "int some_variable = 0;" > conftest.$ac_ext
3019 # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
3020 # that will create temporary files in the current directory regardless of
3021 # the output directory. Thus, making CWD read-only will cause this test
3022 # to fail, enabling locking or at least warning the user not to do parallel
3025 save_CFLAGS="$CFLAGS"
3026 CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
3028 if { (eval echo configure:3029: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
3029 # The compiler can only warn and ignore the option if not recognized
3030 # So say no if there are warnings
3031 if test -s out/conftest.err; then
3032 lt_cv_compiler_c_o=no
3034 lt_cv_compiler_c_o=yes
3037 # Append any errors to the config.log.
3038 cat out/conftest.err 1>&5
3039 lt_cv_compiler_c_o=no
3041 CFLAGS="$save_CFLAGS"
3047 $rm -r conftest 2>/dev/null
3051 compiler_c_o=$lt_cv_compiler_c_o
3052 echo "$ac_t""$compiler_c_o" 1>&6
3054 if test x"$compiler_c_o" = x"yes"; then
3055 # Check to see if we can write to a .lo
3056 echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
3057 echo "configure:3058: checking if $compiler supports -c -o file.lo" >&5
3058 if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
3059 echo $ac_n "(cached) $ac_c" 1>&6
3062 lt_cv_compiler_o_lo=no
3063 save_CFLAGS="$CFLAGS"
3064 CFLAGS="$CFLAGS -c -o conftest.lo"
3065 save_objext="$ac_objext"
3067 cat > conftest.$ac_ext <<EOF
3068 #line 3069 "configure"
3069 #include "confdefs.h"
3072 int some_variable = 0;
3075 if { (eval echo configure:3076: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
3077 # The compiler can only warn and ignore the option if not recognized
3078 # So say no if there are warnings
3079 if test -s conftest.err; then
3080 lt_cv_compiler_o_lo=no
3082 lt_cv_compiler_o_lo=yes
3086 echo "configure: failed program was:" >&5
3087 cat conftest.$ac_ext >&5
3090 ac_objext="$save_objext"
3091 CFLAGS="$save_CFLAGS"
3095 compiler_o_lo=$lt_cv_compiler_o_lo
3096 echo "$ac_t""$compiler_o_lo" 1>&6
3103 ## FIXME: this should be a separate macro
3105 # Check to see if we can do hard links to lock some files if needed
3106 hard_links="nottested"
3107 if test "$compiler_c_o" = no && test "$need_locks" != no; then
3108 # do not overwrite the value of need_locks provided by the user
3109 echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
3110 echo "configure:3111: checking if we can lock with hard links" >&5
3113 ln conftest.a conftest.b 2>/dev/null && hard_links=no
3115 ln conftest.a conftest.b 2>&5 || hard_links=no
3116 ln conftest.a conftest.b 2>/dev/null && hard_links=no
3117 echo "$ac_t""$hard_links" 1>&6
3118 if test "$hard_links" = no; then
3119 echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
3128 ## FIXME: this should be a separate macro
3130 if test "$GCC" = yes; then
3131 # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
3132 echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
3133 echo "configure:3134: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
3134 echo "int some_variable = 0;" > conftest.$ac_ext
3135 save_CFLAGS="$CFLAGS"
3136 CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
3137 compiler_rtti_exceptions=no
3138 cat > conftest.$ac_ext <<EOF
3139 #line 3140 "configure"
3140 #include "confdefs.h"
3143 int some_variable = 0;
3146 if { (eval echo configure:3147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
3148 # The compiler can only warn and ignore the option if not recognized
3149 # So say no if there are warnings
3150 if test -s conftest.err; then
3151 compiler_rtti_exceptions=no
3153 compiler_rtti_exceptions=yes
3157 echo "configure: failed program was:" >&5
3158 cat conftest.$ac_ext >&5
3161 CFLAGS="$save_CFLAGS"
3162 echo "$ac_t""$compiler_rtti_exceptions" 1>&6
3164 if test "$compiler_rtti_exceptions" = "yes"; then
3165 no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
3167 no_builtin_flag=' -fno-builtin'
3173 ## FIXME: this should be a separate macro
3175 # See if the linker supports building shared libraries.
3176 echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
3177 echo "configure:3178: checking whether the linker ($LD) supports shared libraries" >&5
3179 allow_undefined_flag=
3181 need_lib_prefix=unknown
3182 need_version=unknown
3183 # when you set need_version to no, make sure it does not cause -set_version
3184 # flags to be left without arguments
3186 archive_expsym_cmds=
3187 old_archive_from_new_cmds=
3188 old_archive_from_expsyms_cmds=
3189 export_dynamic_flag_spec=
3190 whole_archive_flag_spec=
3191 thread_safe_flag_spec=
3192 hardcode_into_libs=no
3193 hardcode_libdir_flag_spec=
3194 hardcode_libdir_separator=
3197 hardcode_shlibpath_var=unsupported
3199 link_all_deplibs=unknown
3200 always_export_symbols=no
3201 export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
3202 # include_expsyms should be a list of space-separated symbols to be *always*
3203 # included in the symbol list
3205 # exclude_expsyms can be an egrep regular expression of symbols to exclude
3206 # it will be wrapped by ` (' and `)$', so one must not match beginning or
3207 # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
3208 # as well as any symbol that contains `d'.
3209 exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
3210 # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
3211 # platforms (ab)use it in PIC code, but their linkers get confused if
3212 # the symbol is explicitly referenced. Since portable code cannot
3213 # rely on this symbol name, it's probably fine to never include it in
3214 # preloaded symbol tables.
3215 extract_expsyms_cmds=
3218 cygwin* | mingw* | pw32*)
3219 # FIXME: the MSVC++ port hasn't been tested in a loooong time
3220 # When not using gcc, we currently assume that we are using
3221 # Microsoft Visual C++.
3222 if test "$GCC" != yes; then
3232 if test "$with_gnu_ld" = yes; then
3233 # If archive_cmds runs LD, not CC, wlarc should be empty
3236 # See if GNU ld supports shared libraries.
3238 aix3* | aix4* | aix5*)
3239 # On AIX, the GNU linker is very broken
3240 # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
3244 *** Warning: the GNU linker, at least up to release 2.9.1, is reported
3245 *** to be unable to reliably create shared libraries on AIX.
3246 *** Therefore, libtool is disabling shared libraries support. If you
3247 *** really care for shared libraries, you may want to modify your PATH
3248 *** so that a non-GNU linker is found, and then restart.
3254 archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
3255 hardcode_libdir_flag_spec='-L$libdir'
3256 hardcode_minus_L=yes
3258 # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
3259 # that the semantics of dynamic libraries on AmigaOS, at least up
3260 # to version 4, is to share data among multiple programs linked
3261 # with the same dynamic library. Since this doesn't match the
3262 # behavior of shared libraries on other platforms, we can use
3268 if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
3269 allow_undefined_flag=unsupported
3270 # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
3271 # support --undefined. This deserves some investigation. FIXME
3272 archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3278 cygwin* | mingw* | pw32*)
3279 # hardcode_libdir_flag_spec is actually meaningless, as there is
3280 # no search path for DLLs.
3281 hardcode_libdir_flag_spec='-L$libdir'
3282 allow_undefined_flag=unsupported
3283 always_export_symbols=yes
3285 extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
3286 sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
3287 test -f $output_objdir/impgen.exe || (cd $output_objdir && \
3288 if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
3289 else $CC -o impgen impgen.c ; fi)~
3290 $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
3292 old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
3294 # cygwin and mingw dlls have different entry points and sets of symbols
3296 # FIXME: what about values for MSVC?
3297 dll_entry=__cygwin_dll_entry@12
3298 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
3302 dll_entry=_DllMainCRTStartup@12
3303 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
3307 # mingw and cygwin differ, and it's simplest to just exclude the union
3308 # of the two symbol sets.
3309 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
3311 # recent cygwin and mingw systems supply a stub DllMain which the user
3312 # can override, but on older systems we have to supply one (in ltdll.c)
3313 if test "x$lt_cv_need_dllmain" = "xyes"; then
3314 ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
3315 ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
3316 test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
3322 # Extract the symbol export list from an `--export-all' def file,
3323 # then regenerate the def file from the symbol export list, so that
3324 # the compiled dll only exports the symbol export list.
3325 # Be careful not to strip the DATA tag left be newer dlltools.
3326 export_symbols_cmds="$ltdll_cmds"'
3327 $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
3328 sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
3330 # If the export-symbols file already is a .def file (1st line
3331 # is EXPORTS), use it as is.
3332 # If DATA tags from a recent dlltool are present, honour them!
3333 archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
3334 cp $export_symbols $output_objdir/$soname-def;
3336 echo EXPORTS > $output_objdir/$soname-def;
3338 cat $export_symbols | while read symbol; do
3341 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
3342 *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
3344 _lt_hint=`expr 1 + \$_lt_hint`;
3348 $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
3349 $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
3350 $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
3351 $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
3352 $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
3356 if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
3357 archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
3360 archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3361 archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
3366 if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
3370 *** Warning: The releases 2.8.* of the GNU linker cannot reliably
3371 *** create shared libraries on Solaris systems. Therefore, libtool
3372 *** is disabling shared libraries support. We urge you to upgrade GNU
3373 *** binutils to release 2.9.1 or newer. Another option is to modify
3374 *** your PATH or compiler configuration so that the native linker is
3375 *** used, and then restart.
3378 elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
3379 archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3380 archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
3387 archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
3390 hardcode_shlibpath_var=no
3394 if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
3395 archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
3396 archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
3403 if test "$ld_shlibs" = yes; then
3404 runpath_var=LD_RUN_PATH
3405 hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
3406 export_dynamic_flag_spec='${wl}--export-dynamic'
3408 cygwin* | mingw* | pw32*)
3409 # dlltool doesn't understand --whole-archive et. al.
3410 whole_archive_flag_spec=
3413 # ancient GNU ld didn't support --whole-archive et. al.
3414 if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
3415 whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
3417 whole_archive_flag_spec=
3423 # PORTME fill in a description of your system's linker (not GNU ld)
3426 allow_undefined_flag=unsupported
3427 always_export_symbols=yes
3428 archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
3429 # Note: this linker hardcodes the directories in LIBPATH if there
3430 # are no directories specified by -L.
3431 hardcode_minus_L=yes
3432 if test "$GCC" = yes && test -z "$link_static_flag"; then
3433 # Neither direct hardcoding nor static linking is supported with a
3435 hardcode_direct=unsupported
3440 if test "$host_cpu" = ia64; then
3441 # On IA64, the linker does run time linking by default, so we don't
3442 # have to do anything special.
3443 aix_use_runtimelinking=no
3444 exp_sym_flag='-Bexport'
3447 aix_use_runtimelinking=no
3449 # Test if we are trying to use run time linking or normal
3450 # AIX style linking. If -brtl is somewhere in LDFLAGS, we
3451 # need to do runtime linking.
3452 case $host_os in aix4.[23]|aix4.[23].*|aix5*)
3453 for ld_flag in $LDFLAGS; do
3454 if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
3455 aix_use_runtimelinking=yes
3461 exp_sym_flag='-bexport'
3462 no_entry_flag='-bnoentry'
3465 # When large executables or shared objects are built, AIX ld can
3466 # have problems creating the table of contents. If linking a library
3467 # or program results in "error TOC overflow" add -mminimal-toc to
3468 # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
3469 # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
3473 hardcode_libdir_separator=':'
3474 if test "$GCC" = yes; then
3475 case $host_os in aix4.[012]|aix4.[012].*)
3476 collect2name=`${CC} -print-prog-name=collect2`
3477 if test -f "$collect2name" && \
3478 strings "$collect2name" | grep resolve_lib_name >/dev/null
3480 # We have reworked collect2
3483 # We have old collect2
3484 hardcode_direct=unsupported
3485 # It fails to find uninstalled libraries when the uninstalled
3486 # path is not listed in the libpath. Setting hardcode_minus_L
3487 # to unsupported forces relinking
3488 hardcode_minus_L=yes
3489 hardcode_libdir_flag_spec='-L$libdir'
3490 hardcode_libdir_separator=
3494 shared_flag='-shared'
3497 if test "$host_cpu" = ia64; then
3498 shared_flag='${wl}-G'
3500 if test "$aix_use_runtimelinking" = yes; then
3501 shared_flag='${wl}-G'
3503 shared_flag='${wl}-bM:SRE'
3508 # It seems that -bexpall can do strange things, so it is better to
3509 # generate a list of symbols to export.
3510 always_export_symbols=yes
3511 if test "$aix_use_runtimelinking" = yes; then
3512 # Warning - without using the other runtime loading flags (-brtl),
3513 # -berok will link without error, but may produce a broken library.
3514 allow_undefined_flag='-berok'
3515 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
3516 archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
3518 if test "$host_cpu" = ia64; then
3519 hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
3520 allow_undefined_flag="-z nodefs"
3521 archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
3523 hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
3524 # Warning - without using the other run time loading flags,
3525 # -berok will link without error, but may produce a broken library.
3526 allow_undefined_flag='${wl}-berok'
3527 # This is a bit strange, but is similar to how AIX traditionally builds
3528 # it's shared libraries.
3529 archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
3535 archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
3536 hardcode_libdir_flag_spec='-L$libdir'
3537 hardcode_minus_L=yes
3538 # see comment about different semantics on the GNU ld section
3542 cygwin* | mingw* | pw32*)
3543 # When not using gcc, we currently assume that we are using
3544 # Microsoft Visual C++.
3545 # hardcode_libdir_flag_spec is actually meaningless, as there is
3546 # no search path for DLLs.
3547 hardcode_libdir_flag_spec=' '
3548 allow_undefined_flag=unsupported
3549 # Tell ltmain to make .lib files, not .a files.
3551 # FIXME: Setting linknames here is a bad hack.
3552 archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
3553 # The linker will automatically build a .lib file if we build a DLL.
3554 old_archive_from_new_cmds='true'
3555 # FIXME: Should let the user specify the lib program.
3556 old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
3557 fix_srcfile_path='`cygpath -w "$srcfile"`'
3560 darwin* | rhapsody*)
3562 rhapsody* | darwin1.[012])
3563 allow_undefined_flag='-undefined suppress'
3566 allow_undefined_flag='-flat_namespace -undefined suppress'
3569 # FIXME: Relying on posixy $() will cause problems for
3570 # cross-compilation, but unfortunately the echo tests do not
3571 # yet detect zsh echo's removal of \ escapes.
3572 archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
3573 # We need to add '_' to the symbols in $export_symbols first
3574 #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
3576 hardcode_shlibpath_var=no
3577 whole_archive_flag_spec='-all_load $convenience'
3584 # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
3585 # support. Future versions do this automatically, but an explicit c++rt0.o
3586 # does not break anything, and helps significantly (at the cost of a little
3589 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
3590 hardcode_libdir_flag_spec='-R$libdir'
3592 hardcode_shlibpath_var=no
3595 # Unfortunately, older versions of FreeBSD 2 do not have this feature.
3597 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
3599 hardcode_minus_L=yes
3600 hardcode_shlibpath_var=no
3603 # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
3605 archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
3606 hardcode_libdir_flag_spec='-R$libdir'
3608 hardcode_shlibpath_var=no
3611 hpux9* | hpux10* | hpux11*)
3613 hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
3614 *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
3616 hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
3617 hardcode_libdir_separator=:
3619 hardcode_minus_L=yes # Not in the search PATH, but as the default
3620 # location of the library.
3621 export_dynamic_flag_spec='${wl}-E'
3625 if test "$GCC" = yes; then
3626 archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
3628 archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
3630 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3631 hardcode_libdir_separator=:
3632 link_all_deplibs=yes
3636 if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
3637 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
3639 archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
3641 hardcode_libdir_flag_spec='-R$libdir'
3643 hardcode_shlibpath_var=no
3647 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3649 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3650 hardcode_libdir_separator=:
3651 hardcode_shlibpath_var=no
3656 hardcode_shlibpath_var=no
3657 if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
3658 archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
3659 hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
3660 export_dynamic_flag_spec='${wl}-E'
3663 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
3664 archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
3665 hardcode_libdir_flag_spec='-R$libdir'
3668 archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
3669 hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
3676 hardcode_libdir_flag_spec='-L$libdir'
3677 hardcode_minus_L=yes
3678 allow_undefined_flag=unsupported
3679 archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
3680 old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
3684 if test "$GCC" = yes; then
3685 allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
3686 archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
3688 allow_undefined_flag=' -expect_unresolved \*'
3689 archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
3691 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3692 hardcode_libdir_separator=:
3695 osf4* | osf5*) # as osf3* with the addition of -msym flag
3696 if test "$GCC" = yes; then
3697 allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
3698 archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
3699 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
3701 allow_undefined_flag=' -expect_unresolved \*'
3702 archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
3703 archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
3704 $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
3706 #Both c and cxx compiler support -rpath directly
3707 hardcode_libdir_flag_spec='-rpath $libdir'
3709 hardcode_libdir_separator=:
3713 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3714 hardcode_shlibpath_var=no
3715 runpath_var=LD_RUN_PATH
3716 hardcode_runpath_var=yes
3717 export_dynamic_flag_spec='${wl}-Bexport'
3721 # gcc --version < 3.0 without binutils cannot create self contained
3722 # shared libraries reliably, requiring libgcc.a to resolve some of
3723 # the object symbols generated in some cases. Libraries that use
3724 # assert need libgcc.a to resolve __eprintf, for example. Linking
3725 # a copy of libgcc.a into every shared library to guarantee resolving
3726 # such symbols causes other problems: According to Tim Van Holder
3727 # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
3728 # (to the application) exception stack for one thing.
3729 no_undefined_flag=' -z defs'
3730 if test "$GCC" = yes; then
3731 case `$CC --version 2>/dev/null` in
3735 *** Warning: Releases of GCC earlier than version 3.0 cannot reliably
3736 *** create self contained shared libraries on Solaris systems, without
3737 *** introducing a dependency on libgcc.a. Therefore, libtool is disabling
3738 *** -no-undefined support, which will at least allow you to build shared
3739 *** libraries. However, you may find that when you link such libraries
3740 *** into an application without using GCC, you have to manually add
3741 *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
3742 *** upgrade to a newer version of GCC. Another option is to rebuild your
3743 *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
3750 # $CC -shared without GNU ld will not create a library from C++
3751 # object files and a static libstdc++, better avoid it by now
3752 archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
3753 archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
3754 $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
3755 hardcode_libdir_flag_spec='-R$libdir'
3756 hardcode_shlibpath_var=no
3758 solaris2.[0-5] | solaris2.[0-5].*) ;;
3759 *) # Supported since Solaris 2.6 (maybe 2.5.1?)
3760 whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
3762 link_all_deplibs=yes
3766 if test "x$host_vendor" = xsequent; then
3767 # Use $CC to link under sequent, because it throws in some extra .o
3768 # files that make .init and .fini sections work.
3769 archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
3771 archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
3773 hardcode_libdir_flag_spec='-L$libdir'
3775 hardcode_minus_L=yes
3776 hardcode_shlibpath_var=no
3780 if test "x$host_vendor" = xsno; then
3781 archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
3782 hardcode_direct=yes # is this really true???
3784 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3785 hardcode_direct=no #Motorola manual says yes, but my tests say they lie
3787 runpath_var='LD_RUN_PATH'
3788 hardcode_shlibpath_var=no
3792 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3793 hardcode_shlibpath_var=no
3794 export_dynamic_flag_spec='-Bexport'
3798 no_undefined_flag=' -z text'
3799 # $CC -shared without GNU ld will not create a library from C++
3800 # object files and a static libstdc++, better avoid it by now
3801 archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
3802 archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
3803 $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
3804 hardcode_libdir_flag_spec=
3805 hardcode_shlibpath_var=no
3806 runpath_var='LD_RUN_PATH'
3810 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3811 hardcode_libdir_flag_spec='-L$libdir'
3812 hardcode_shlibpath_var=no
3816 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3817 hardcode_libdir_flag_spec='-L$libdir'
3818 hardcode_shlibpath_var=no
3822 if test -d /usr/nec; then
3823 archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
3824 hardcode_shlibpath_var=no
3825 runpath_var=LD_RUN_PATH
3826 hardcode_runpath_var=yes
3832 archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
3835 hardcode_shlibpath_var=no
3836 hardcode_runpath_var=yes
3837 runpath_var=LD_RUN_PATH
3840 sysv5uw7* | unixware7*)
3841 no_undefined_flag='${wl}-z ${wl}text'
3842 if test "$GCC" = yes; then
3843 archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
3845 archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
3847 runpath_var='LD_RUN_PATH'
3848 hardcode_shlibpath_var=no
3856 echo "$ac_t""$ld_shlibs" 1>&6
3857 test "$ld_shlibs" = no && can_build_shared=no
3861 ## FIXME: this should be a separate macro
3863 # Check hardcoding attributes.
3864 echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
3865 echo "configure:3866: checking how to hardcode library paths into programs" >&5
3867 if test -n "$hardcode_libdir_flag_spec" || \
3868 test -n "$runpath_var"; then
3870 # We can hardcode non-existant directories.
3871 if test "$hardcode_direct" != no &&
3872 # If the only mechanism to avoid hardcoding is shlibpath_var, we
3873 # have to relink, otherwise we might link with an installed library
3874 # when we should be linking with a yet-to-be-installed one
3875 ## test "$hardcode_shlibpath_var" != no &&
3876 test "$hardcode_minus_L" != no; then
3877 # Linking always hardcodes the temporary library directory.
3878 hardcode_action=relink
3880 # We can link without hardcoding, and we can hardcode nonexisting dirs.
3881 hardcode_action=immediate
3884 # We cannot hardcode anything, or else we can only hardcode existing
3886 hardcode_action=unsupported
3888 echo "$ac_t""$hardcode_action" 1>&6
3892 ## FIXME: this should be a separate macro
3896 echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
3897 echo "configure:3898: checking whether stripping libraries is possible" >&5
3898 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
3899 test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
3900 test -z "$striplib" && striplib="$STRIP --strip-unneeded"
3901 echo "$ac_t""yes" 1>&6
3903 echo "$ac_t""no" 1>&6
3908 reload_cmds='$LD$reload_flag -o $output$reload_objs'
3909 test -z "$deplibs_check_method" && deplibs_check_method=unknown
3911 ## FIXME: this should be a separate macro
3913 # PORTME Fill in your ld.so characteristics
3914 echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
3915 echo "configure:3916: checking dynamic linker characteristics" >&5
3917 libname_spec='lib$name'
3924 shlibpath_overrides_runpath=unknown
3926 dynamic_linker="$host_os ld.so"
3927 sys_lib_dlsearch_path_spec="/lib /usr/lib"
3928 sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
3933 library_names_spec='${libname}${release}.so$versuffix $libname.a'
3934 shlibpath_var=LIBPATH
3936 # AIX has no versioning support, so we append a major version to the name.
3937 soname_spec='${libname}${release}.so$major'
3942 if test "$host_cpu" = ia64; then
3943 # AIX 5 supports IA64
3944 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
3945 shlibpath_var=LD_LIBRARY_PATH
3947 # With GCC up to 2.95.x, collect2 would create an import file
3948 # for dependence libraries. The import file would start with
3949 # the line `#! .'. This would cause the generated library to
3950 # depend on `.', always an invalid library. This was fixed in
3951 # development snapshots of GCC prior to 3.0.
3953 aix4 | aix4.[01] | aix4.[01].*)
3954 if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
3956 echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
3963 # AIX (on Power*) has no versioning support, so currently we can
3964 # not hardcode correct soname into executable. Probably we can
3965 # add versioning support to collect2, so additional links can
3966 # be useful in future.
3967 if test "$aix_use_runtimelinking" = yes; then
3968 # If using run time linking (on AIX 4.2 or later) use lib<name>.so
3969 # instead of lib<name>.a to let people know that these are not
3970 # typical AIX shared libraries.
3971 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
3973 # We preserve .a as extension for shared libraries through AIX4.2
3974 # and later when we are not doing run time linking.
3975 library_names_spec='${libname}${release}.a $libname.a'
3976 soname_spec='${libname}${release}.so$major'
3978 shlibpath_var=LIBPATH
3983 library_names_spec='$libname.ixlibrary $libname.a'
3984 # Create ${libname}_ixlibrary.a entries in /sys/libs.
3985 finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
3989 library_names_spec='${libname}.so'
3990 dynamic_linker="$host_os ld.so"
3991 shlibpath_var=LIBRARY_PATH
3997 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
3998 soname_spec='${libname}${release}.so$major'
3999 finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
4000 shlibpath_var=LD_LIBRARY_PATH
4001 sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
4002 sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
4003 export_dynamic_flag_spec=-rdynamic
4004 # the default ld.so.conf also contains /usr/contrib/lib and
4005 # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
4006 # libtool to hard-code these into programs
4009 cygwin* | mingw* | pw32*)
4010 version_type=windows
4013 case $GCC,$host_os in
4015 library_names_spec='$libname.dll.a'
4016 soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
4017 postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
4018 dldir=$destdir/`dirname \$dlpath`~
4019 test -d \$dldir || mkdir -p \$dldir~
4020 $install_prog .libs/$dlname \$dldir/$dlname'
4021 postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
4022 dlpath=$dir/\$dldll~
4026 library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
4027 sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
4030 library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
4033 library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
4036 dynamic_linker='Win32 ld.exe'
4037 # FIXME: first we should search . and the directory the executable is in
4041 darwin* | rhapsody*)
4042 dynamic_linker="$host_os dyld"
4046 # FIXME: Relying on posixy $() will cause problems for
4047 # cross-compilation, but unfortunately the echo tests do not
4048 # yet detect zsh echo's removal of \ escapes.
4049 library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
4050 soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
4051 shlibpath_overrides_runpath=yes
4052 shlibpath_var=DYLD_LIBRARY_PATH
4060 objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
4061 version_type=freebsd-$objformat
4062 case $version_type in
4064 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
4069 library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
4073 shlibpath_var=LD_LIBRARY_PATH
4076 shlibpath_overrides_runpath=yes
4079 shlibpath_overrides_runpath=no
4080 hardcode_into_libs=yes
4089 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
4090 soname_spec='${libname}${release}.so$major'
4091 shlibpath_var=LD_LIBRARY_PATH
4092 hardcode_into_libs=yes
4095 hpux9* | hpux10* | hpux11*)
4096 # Give a soname corresponding to the major version so that dld.sl refuses to
4097 # link against other versions.
4098 dynamic_linker="$host_os dld.sl"
4102 shlibpath_var=SHLIB_PATH
4103 shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
4104 library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
4105 soname_spec='${libname}${release}.sl$major'
4106 # HP-UX runs *really* slowly unless shared libraries are mode 555.
4107 postinstall_cmds='chmod 555 $lib'
4114 soname_spec='${libname}${release}.so$major'
4115 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
4121 case $LD in # libtool.m4 will add one of these switches to LD
4122 *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
4123 *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
4124 *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
4125 *) libsuff= shlibsuff= libmagic=never-match;;
4129 shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
4130 shlibpath_overrides_runpath=no
4131 sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
4132 sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
4135 # No shared lib support for Linux oldld, aout, or coff.
4136 linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
4140 # This must be Linux ELF.
4145 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4146 soname_spec='${libname}${release}.so$major'
4147 finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
4148 shlibpath_var=LD_LIBRARY_PATH
4149 shlibpath_overrides_runpath=no
4150 # This implies no fast_install, which is unacceptable.
4151 # Some rework will be needed to allow for fast_install
4152 # before this can be enabled.
4153 hardcode_into_libs=yes
4155 # We used to test for /lib/ld.so.1 and disable shared libraries on
4156 # powerpc, because MkLinux only supported shared libraries with the
4157 # GNU dynamic linker. Since this was broken with cross compilers,
4158 # most powerpc-linux boxes support dynamic linking these days and
4159 # people can always --disable-shared, the test was removed, and we
4160 # assume the GNU/Linux dynamic linker is in use.
4161 dynamic_linker='GNU/Linux ld.so'
4168 if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
4169 library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
4170 finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
4171 dynamic_linker='NetBSD (a.out) ld.so'
4173 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
4174 soname_spec='${libname}${release}.so$major'
4175 dynamic_linker='NetBSD ld.elf_so'
4177 shlibpath_var=LD_LIBRARY_PATH
4178 shlibpath_overrides_runpath=yes
4179 hardcode_into_libs=yes
4184 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4185 shlibpath_var=LD_LIBRARY_PATH
4186 shlibpath_overrides_runpath=yes
4193 if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
4195 openbsd2.[89] | openbsd2.[89].*)
4196 shlibpath_overrides_runpath=no
4199 shlibpath_overrides_runpath=yes
4203 shlibpath_overrides_runpath=yes
4205 library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
4206 finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
4207 shlibpath_var=LD_LIBRARY_PATH
4211 libname_spec='$name'
4213 library_names_spec='$libname.dll $libname.a'
4214 dynamic_linker='OS/2 ld.exe'
4215 shlibpath_var=LIBPATH
4218 osf3* | osf4* | osf5*)
4221 soname_spec='${libname}${release}.so'
4222 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
4223 shlibpath_var=LD_LIBRARY_PATH
4224 sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
4225 sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
4230 soname_spec='${libname}${release}.so$major'
4231 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4232 shlibpath_var=LD_LIBRARY_PATH
4239 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4240 soname_spec='${libname}${release}.so$major'
4241 shlibpath_var=LD_LIBRARY_PATH
4242 shlibpath_overrides_runpath=yes
4243 hardcode_into_libs=yes
4244 # ldd complains unless libraries are executable
4245 postinstall_cmds='chmod +x $lib'
4250 library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
4251 finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
4252 shlibpath_var=LD_LIBRARY_PATH
4253 shlibpath_overrides_runpath=yes
4254 if test "$with_gnu_ld" = yes; then
4260 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
4262 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4263 soname_spec='${libname}${release}.so$major'
4264 shlibpath_var=LD_LIBRARY_PATH
4265 case $host_vendor in
4267 shlibpath_overrides_runpath=no
4272 shlibpath_overrides_runpath=no
4273 sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
4280 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4281 soname_spec='${libname}${release}.so$major'
4282 shlibpath_var=LD_LIBRARY_PATH
4289 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
4290 soname_spec='${libname}${release}.so$major'
4291 shlibpath_var=LD_LIBRARY_PATH
4295 if test -d /usr/nec ;then
4297 library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
4298 soname_spec='$libname.so.$major'
4299 shlibpath_var=LD_LIBRARY_PATH
4307 echo "$ac_t""$dynamic_linker" 1>&6
4308 test "$dynamic_linker" = no && can_build_shared=no
4312 ## FIXME: this should be a separate macro
4314 # Report the final consequences.
4315 echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
4316 echo "configure:4317: checking if libtool supports shared libraries" >&5
4317 echo "$ac_t""$can_build_shared" 1>&6
4321 ## FIXME: this should be a separate macro
4323 echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
4324 echo "configure:4325: checking whether to build shared libraries" >&5
4325 test "$can_build_shared" = "no" && enable_shared=no
4327 # On AIX, shared libraries and static libraries use the same namespace, and
4328 # are all built from PIC.
4331 test "$enable_shared" = yes && enable_static=no
4332 if test -n "$RANLIB"; then
4333 archive_cmds="$archive_cmds~\$RANLIB \$lib"
4334 postinstall_cmds='$RANLIB $lib'
4339 if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
4340 test "$enable_shared" = yes && enable_static=no
4344 echo "$ac_t""$enable_shared" 1>&6
4348 ## FIXME: this should be a separate macro
4350 echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
4351 echo "configure:4352: checking whether to build static libraries" >&5
4352 # Make sure either enable_shared or enable_static is yes.
4353 test "$enable_shared" = yes || enable_static=yes
4354 echo "$ac_t""$enable_static" 1>&6
4358 if test "$hardcode_action" = relink; then
4359 # Fast installation is not supported
4360 enable_fast_install=no
4361 elif test "$shlibpath_overrides_runpath" = yes ||
4362 test "$enable_shared" = no; then
4363 # Fast installation is not necessary
4364 enable_fast_install=needless
4367 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
4368 if test "$GCC" = yes; then
4369 variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
4372 if test "x$enable_dlopen" != xyes; then
4373 enable_dlopen=unknown
4374 enable_dlopen_self=unknown
4375 enable_dlopen_self_static=unknown
4382 lt_cv_dlopen="load_add_on"
4384 lt_cv_dlopen_self=yes
4387 cygwin* | mingw* | pw32*)
4388 lt_cv_dlopen="LoadLibrary"
4393 echo $ac_n "checking for shl_load""... $ac_c" 1>&6
4394 echo "configure:4395: checking for shl_load" >&5
4395 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
4396 echo $ac_n "(cached) $ac_c" 1>&6
4398 cat > conftest.$ac_ext <<EOF
4399 #line 4400 "configure"
4400 #include "confdefs.h"
4401 /* System header to define __stub macros and hopefully few prototypes,
4402 which can conflict with char shl_load(); below. */
4404 /* Override any gcc2 internal prototype to avoid an error. */
4405 /* We use char because int might match the return type of a gcc2
4406 builtin and then its argument prototype would still apply. */
4411 /* The GNU C library defines this for functions which it implements
4412 to always fail with ENOSYS. Some functions are actually named
4413 something starting with __ and the normal name is an alias. */
4414 #if defined (__stub_shl_load) || defined (__stub___shl_load)
4422 if { (eval echo configure:4423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4424 eval "ac_cv_func_shl_load=yes"
4426 echo "configure: failed program was:" >&5
4427 cat conftest.$ac_ext >&5
4429 eval "ac_cv_func_shl_load=no"
4434 if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
4435 echo "$ac_t""yes" 1>&6
4436 lt_cv_dlopen="shl_load"
4438 echo "$ac_t""no" 1>&6
4439 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
4440 echo "configure:4441: checking for shl_load in -ldld" >&5
4441 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
4442 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4443 echo $ac_n "(cached) $ac_c" 1>&6
4445 ac_save_LIBS="$LIBS"
4447 cat > conftest.$ac_ext <<EOF
4448 #line 4449 "configure"
4449 #include "confdefs.h"
4450 /* Override any gcc2 internal prototype to avoid an error. */
4451 /* We use char because int might match the return type of a gcc2
4452 builtin and then its argument prototype would still apply. */
4459 if { (eval echo configure:4460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4461 eval "ac_cv_lib_$ac_lib_var=yes"
4463 echo "configure: failed program was:" >&5
4464 cat conftest.$ac_ext >&5
4466 eval "ac_cv_lib_$ac_lib_var=no"
4469 LIBS="$ac_save_LIBS"
4472 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4473 echo "$ac_t""yes" 1>&6
4474 lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
4476 echo "$ac_t""no" 1>&6
4477 echo $ac_n "checking for dlopen""... $ac_c" 1>&6
4478 echo "configure:4479: checking for dlopen" >&5
4479 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
4480 echo $ac_n "(cached) $ac_c" 1>&6
4482 cat > conftest.$ac_ext <<EOF
4483 #line 4484 "configure"
4484 #include "confdefs.h"
4485 /* System header to define __stub macros and hopefully few prototypes,
4486 which can conflict with char dlopen(); below. */
4488 /* Override any gcc2 internal prototype to avoid an error. */
4489 /* We use char because int might match the return type of a gcc2
4490 builtin and then its argument prototype would still apply. */
4495 /* The GNU C library defines this for functions which it implements
4496 to always fail with ENOSYS. Some functions are actually named
4497 something starting with __ and the normal name is an alias. */
4498 #if defined (__stub_dlopen) || defined (__stub___dlopen)
4506 if { (eval echo configure:4507: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4508 eval "ac_cv_func_dlopen=yes"
4510 echo "configure: failed program was:" >&5
4511 cat conftest.$ac_ext >&5
4513 eval "ac_cv_func_dlopen=no"
4518 if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
4519 echo "$ac_t""yes" 1>&6
4520 lt_cv_dlopen="dlopen"
4522 echo "$ac_t""no" 1>&6
4523 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
4524 echo "configure:4525: checking for dlopen in -ldl" >&5
4525 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
4526 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4527 echo $ac_n "(cached) $ac_c" 1>&6
4529 ac_save_LIBS="$LIBS"
4531 cat > conftest.$ac_ext <<EOF
4532 #line 4533 "configure"
4533 #include "confdefs.h"
4534 /* Override any gcc2 internal prototype to avoid an error. */
4535 /* We use char because int might match the return type of a gcc2
4536 builtin and then its argument prototype would still apply. */
4543 if { (eval echo configure:4544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4545 eval "ac_cv_lib_$ac_lib_var=yes"
4547 echo "configure: failed program was:" >&5
4548 cat conftest.$ac_ext >&5
4550 eval "ac_cv_lib_$ac_lib_var=no"
4553 LIBS="$ac_save_LIBS"
4556 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4557 echo "$ac_t""yes" 1>&6
4558 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
4560 echo "$ac_t""no" 1>&6
4561 echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
4562 echo "configure:4563: checking for dlopen in -lsvld" >&5
4563 ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
4564 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4565 echo $ac_n "(cached) $ac_c" 1>&6
4567 ac_save_LIBS="$LIBS"
4569 cat > conftest.$ac_ext <<EOF
4570 #line 4571 "configure"
4571 #include "confdefs.h"
4572 /* Override any gcc2 internal prototype to avoid an error. */
4573 /* We use char because int might match the return type of a gcc2
4574 builtin and then its argument prototype would still apply. */
4581 if { (eval echo configure:4582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4583 eval "ac_cv_lib_$ac_lib_var=yes"
4585 echo "configure: failed program was:" >&5
4586 cat conftest.$ac_ext >&5
4588 eval "ac_cv_lib_$ac_lib_var=no"
4591 LIBS="$ac_save_LIBS"
4594 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4595 echo "$ac_t""yes" 1>&6
4596 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
4598 echo "$ac_t""no" 1>&6
4599 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
4600 echo "configure:4601: checking for dld_link in -ldld" >&5
4601 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
4602 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
4603 echo $ac_n "(cached) $ac_c" 1>&6
4605 ac_save_LIBS="$LIBS"
4607 cat > conftest.$ac_ext <<EOF
4608 #line 4609 "configure"
4609 #include "confdefs.h"
4610 /* Override any gcc2 internal prototype to avoid an error. */
4611 /* We use char because int might match the return type of a gcc2
4612 builtin and then its argument prototype would still apply. */
4619 if { (eval echo configure:4620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
4621 eval "ac_cv_lib_$ac_lib_var=yes"
4623 echo "configure: failed program was:" >&5
4624 cat conftest.$ac_ext >&5
4626 eval "ac_cv_lib_$ac_lib_var=no"
4629 LIBS="$ac_save_LIBS"
4632 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
4633 echo "$ac_t""yes" 1>&6
4634 lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
4636 echo "$ac_t""no" 1>&6
4657 if test "x$lt_cv_dlopen" != xno; then
4663 case $lt_cv_dlopen in
4665 save_CPPFLAGS="$CPPFLAGS"
4666 test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
4668 save_LDFLAGS="$LDFLAGS"
4669 eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
4672 LIBS="$lt_cv_dlopen_libs $LIBS"
4674 echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
4675 echo "configure:4676: checking whether a program can dlopen itself" >&5
4676 if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
4677 echo $ac_n "(cached) $ac_c" 1>&6
4679 if test "$cross_compiling" = yes; then :
4680 lt_cv_dlopen_self=cross
4682 lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
4683 lt_status=$lt_dlunknown
4684 cat > conftest.$ac_ext <<EOF
4685 #line 4686 "configure"
4686 #include "confdefs.h"
4695 # define LT_DLGLOBAL RTLD_GLOBAL
4698 # define LT_DLGLOBAL DL_GLOBAL
4700 # define LT_DLGLOBAL 0
4704 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
4705 find out it does not work in some platform. */
4706 #ifndef LT_DLLAZY_OR_NOW
4708 # define LT_DLLAZY_OR_NOW RTLD_LAZY
4711 # define LT_DLLAZY_OR_NOW DL_LAZY
4714 # define LT_DLLAZY_OR_NOW RTLD_NOW
4717 # define LT_DLLAZY_OR_NOW DL_NOW
4719 # define LT_DLLAZY_OR_NOW 0
4727 extern "C" void exit (int);
4730 void fnord() { int i=42;}
4733 void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
4734 int status = $lt_dlunknown;
4738 if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
4739 else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
4740 /* dlclose (self); */
4746 if { (eval echo configure:4747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
4747 (./conftest; exit; ) 2>/dev/null
4750 x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
4751 x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
4752 x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
4755 # compilation failed
4756 lt_cv_dlopen_self=no
4764 echo "$ac_t""$lt_cv_dlopen_self" 1>&6
4766 if test "x$lt_cv_dlopen_self" = xyes; then
4767 LDFLAGS="$LDFLAGS $link_static_flag"
4768 echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
4769 echo "configure:4770: checking whether a statically linked program can dlopen itself" >&5
4770 if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
4771 echo $ac_n "(cached) $ac_c" 1>&6
4773 if test "$cross_compiling" = yes; then :
4774 lt_cv_dlopen_self_static=cross
4776 lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
4777 lt_status=$lt_dlunknown
4778 cat > conftest.$ac_ext <<EOF
4779 #line 4780 "configure"
4780 #include "confdefs.h"
4789 # define LT_DLGLOBAL RTLD_GLOBAL
4792 # define LT_DLGLOBAL DL_GLOBAL
4794 # define LT_DLGLOBAL 0
4798 /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
4799 find out it does not work in some platform. */
4800 #ifndef LT_DLLAZY_OR_NOW
4802 # define LT_DLLAZY_OR_NOW RTLD_LAZY
4805 # define LT_DLLAZY_OR_NOW DL_LAZY
4808 # define LT_DLLAZY_OR_NOW RTLD_NOW
4811 # define LT_DLLAZY_OR_NOW DL_NOW
4813 # define LT_DLLAZY_OR_NOW 0
4821 extern "C" void exit (int);
4824 void fnord() { int i=42;}
4827 void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
4828 int status = $lt_dlunknown;
4832 if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
4833 else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
4834 /* dlclose (self); */
4840 if { (eval echo configure:4841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
4841 (./conftest; exit; ) 2>/dev/null
4844 x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
4845 x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
4846 x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
4849 # compilation failed
4850 lt_cv_dlopen_self_static=no
4858 echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
4861 CPPFLAGS="$save_CPPFLAGS"
4862 LDFLAGS="$save_LDFLAGS"
4867 case $lt_cv_dlopen_self in
4868 yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
4869 *) enable_dlopen_self=unknown ;;
4872 case $lt_cv_dlopen_self_static in
4873 yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
4874 *) enable_dlopen_self_static=unknown ;;
4879 ## FIXME: this should be a separate macro
4881 if test "$enable_shared" = yes && test "$GCC" = yes; then
4882 case $archive_cmds in
4884 # FIXME: we may have to deal with multi-command sequences.
4887 # Test whether the compiler implicitly links with -lc since on some
4888 # systems, -lgcc has to come before -lc. If gcc already passes -lc
4889 # to ld, don't add -lc before -lgcc.
4890 echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
4891 echo "configure:4892: checking whether -lc should be explicitly linked in" >&5
4892 if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
4893 echo $ac_n "(cached) $ac_c" 1>&6
4896 echo 'static int dummy;' > conftest.$ac_ext
4898 if { (eval echo configure:4899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
4901 libobjs=conftest.$ac_objext
4903 wl=$lt_cv_prog_cc_wl
4909 save_allow_undefined_flag=$allow_undefined_flag
4910 allow_undefined_flag=
4911 if { (eval echo configure:4912: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
4913 lt_cv_archive_cmds_need_lc=no
4915 lt_cv_archive_cmds_need_lc=yes
4917 allow_undefined_flag=$save_allow_undefined_flag
4919 cat conftest.err 1>&5
4923 echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
4927 need_lc=${lt_cv_archive_cmds_need_lc-yes}
4931 ## FIXME: this should be a separate macro
4933 # The second clause should only fire when bootstrapping the
4934 # libtool distribution, otherwise you forgot to ship ltmain.sh
4935 # with your package, and you will get complaints that there are
4936 # no rules to generate ltmain.sh.
4937 if test -f "$ltmain"; then
4940 # If there is no Makefile yet, we rely on a make rule to execute
4941 # `config.status --recheck' to rerun these tests and create the
4942 # libtool script then.
4943 test -f Makefile && make "$ltmain"
4946 if test -f "$ltmain"; then
4947 trap "$rm \"${ofile}T\"; exit 1" 1 2 15
4950 echo creating $ofile
4952 # Now quote all the things that may contain metacharacters while being
4953 # careful not to overquote the AC_SUBSTed values. We take copies of the
4954 # variables and quote the copies for generation of the libtool script.
4955 for var in echo old_CC old_CFLAGS \
4956 AR AR_FLAGS CC LD LN_S NM SHELL \
4957 reload_flag reload_cmds wl \
4958 pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
4959 thread_safe_flag_spec whole_archive_flag_spec libname_spec \
4960 library_names_spec soname_spec \
4961 RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
4962 old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
4963 postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
4964 old_striplib striplib file_magic_cmd export_symbols_cmds \
4965 deplibs_check_method allow_undefined_flag no_undefined_flag \
4966 finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
4967 global_symbol_to_c_name_address \
4968 hardcode_libdir_flag_spec hardcode_libdir_separator \
4969 sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
4970 compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
4973 reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
4974 old_postinstall_cmds | old_postuninstall_cmds | \
4975 export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
4976 extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
4977 postinstall_cmds | postuninstall_cmds | \
4978 finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
4979 # Double-quote double-evaled strings.
4980 eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
4983 eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
4988 cat <<__EOF__ > "${ofile}T"
4991 # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
4992 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
4993 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
4995 # Copyright (C) 1996-2000 Free Software Foundation, Inc.
4996 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
4998 # This program is free software; you can redistribute it and/or modify
4999 # it under the terms of the GNU General Public License as published by
5000 # the Free Software Foundation; either version 2 of the License, or
5001 # (at your option) any later version.
5003 # This program is distributed in the hope that it will be useful, but
5004 # WITHOUT ANY WARRANTY; without even the implied warranty of
5005 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
5006 # General Public License for more details.
5008 # You should have received a copy of the GNU General Public License
5009 # along with this program; if not, write to the Free Software
5010 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
5012 # As a special exception to the GNU General Public License, if you
5013 # distribute this file as part of a program that contains a
5014 # configuration script generated by Autoconf, you may include it under
5015 # the same distribution terms that you use for the rest of that program.
5017 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
5018 Xsed="sed -e s/^X//"
5020 # The HP-UX ksh and POSIX shell print the target directory to stdout
5022 if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
5024 # ### BEGIN LIBTOOL CONFIG
5026 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
5028 # Shell to use when invoking shell scripts.
5031 # Whether or not to build shared libraries.
5032 build_libtool_libs=$enable_shared
5034 # Whether or not to build static libraries.
5035 build_old_libs=$enable_static
5037 # Whether or not to add -lc for building shared libraries.
5038 build_libtool_need_lc=$need_lc
5040 # Whether or not to optimize for fast installation.
5041 fast_install=$enable_fast_install
5044 host_alias=$host_alias
5047 # An echo program that does not interpret backslashes.
5052 AR_FLAGS=$lt_AR_FLAGS
5054 # The default C compiler.
5057 # Is the compiler the GNU C compiler?
5060 # The linker used to build libraries.
5063 # Whether we need hard or soft links.
5066 # A BSD-compatible nm program.
5069 # A symbol stripping program
5072 # Used to examine libraries when file_magic_cmd begins "file"
5073 MAGIC_CMD=$MAGIC_CMD
5075 # Used on cygwin: DLL creation program.
5078 # Used on cygwin: object dumper.
5081 # Used on cygwin: assembler.
5084 # The name of the directory that contains temporary libtool files.
5087 # How to create reloadable object files.
5088 reload_flag=$lt_reload_flag
5089 reload_cmds=$lt_reload_cmds
5091 # How to pass a linker flag through the compiler.
5094 # Object file suffix (normally "o").
5097 # Old archive suffix (normally "a").
5100 # Executable file suffix (normally "").
5103 # Additional compiler flags for building library objects.
5104 pic_flag=$lt_pic_flag
5107 # Does compiler simultaneously support -c and -o options?
5108 compiler_c_o=$lt_compiler_c_o
5110 # Can we write directly to a .lo ?
5111 compiler_o_lo=$lt_compiler_o_lo
5113 # Must we lock files when doing compilation ?
5114 need_locks=$lt_need_locks
5116 # Do we need the lib prefix for modules?
5117 need_lib_prefix=$need_lib_prefix
5119 # Do we need a version for libraries?
5120 need_version=$need_version
5122 # Whether dlopen is supported.
5123 dlopen_support=$enable_dlopen
5125 # Whether dlopen of programs is supported.
5126 dlopen_self=$enable_dlopen_self
5128 # Whether dlopen of statically linked programs is supported.
5129 dlopen_self_static=$enable_dlopen_self_static
5131 # Compiler flag to prevent dynamic linking.
5132 link_static_flag=$lt_link_static_flag
5134 # Compiler flag to turn off builtin functions.
5135 no_builtin_flag=$lt_no_builtin_flag
5137 # Compiler flag to allow reflexive dlopens.
5138 export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
5140 # Compiler flag to generate shared objects directly from archives.
5141 whole_archive_flag_spec=$lt_whole_archive_flag_spec
5143 # Compiler flag to generate thread-safe objects.
5144 thread_safe_flag_spec=$lt_thread_safe_flag_spec
5146 # Library versioning type.
5147 version_type=$version_type
5149 # Format of library name prefix.
5150 libname_spec=$lt_libname_spec
5152 # List of archive names. First name is the real one, the rest are links.
5153 # The last name is the one that the linker finds with -lNAME.
5154 library_names_spec=$lt_library_names_spec
5156 # The coded name of the library, if different from the real name.
5157 soname_spec=$lt_soname_spec
5159 # Commands used to build and install an old-style archive.
5161 old_archive_cmds=$lt_old_archive_cmds
5162 old_postinstall_cmds=$lt_old_postinstall_cmds
5163 old_postuninstall_cmds=$lt_old_postuninstall_cmds
5165 # Create an old-style archive from a shared archive.
5166 old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
5168 # Create a temporary old-style archive to link instead of a shared archive.
5169 old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
5171 # Commands used to build and install a shared archive.
5172 archive_cmds=$lt_archive_cmds
5173 archive_expsym_cmds=$lt_archive_expsym_cmds
5174 postinstall_cmds=$lt_postinstall_cmds
5175 postuninstall_cmds=$lt_postuninstall_cmds
5177 # Commands to strip libraries.
5178 old_striplib=$lt_old_striplib
5179 striplib=$lt_striplib
5181 # Method to check whether dependent libraries are shared objects.
5182 deplibs_check_method=$lt_deplibs_check_method
5184 # Command to use when deplibs_check_method == file_magic.
5185 file_magic_cmd=$lt_file_magic_cmd
5187 # Flag that allows shared libraries with undefined symbols to be built.
5188 allow_undefined_flag=$lt_allow_undefined_flag
5190 # Flag that forces no undefined symbols.
5191 no_undefined_flag=$lt_no_undefined_flag
5193 # Commands used to finish a libtool library installation in a directory.
5194 finish_cmds=$lt_finish_cmds
5196 # Same as above, but a single script fragment to be evaled but not shown.
5197 finish_eval=$lt_finish_eval
5199 # Take the output of nm and produce a listing of raw symbols and C names.
5200 global_symbol_pipe=$lt_global_symbol_pipe
5202 # Transform the output of nm in a proper C declaration
5203 global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
5205 # Transform the output of nm in a C name address pair
5206 global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
5208 # This is the shared library runtime path variable.
5209 runpath_var=$runpath_var
5211 # This is the shared library path variable.
5212 shlibpath_var=$shlibpath_var
5214 # Is shlibpath searched before the hard-coded library search path?
5215 shlibpath_overrides_runpath=$shlibpath_overrides_runpath
5217 # How to hardcode a shared library path into an executable.
5218 hardcode_action=$hardcode_action
5220 # Whether we should hardcode library paths into libraries.
5221 hardcode_into_libs=$hardcode_into_libs
5223 # Flag to hardcode \$libdir into a binary during linking.
5224 # This must work even if \$libdir does not exist.
5225 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
5227 # Whether we need a single -rpath flag with a separated argument.
5228 hardcode_libdir_separator=$lt_hardcode_libdir_separator
5230 # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
5232 hardcode_direct=$hardcode_direct
5234 # Set to yes if using the -LDIR flag during linking hardcodes DIR into the
5236 hardcode_minus_L=$hardcode_minus_L
5238 # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
5239 # the resulting binary.
5240 hardcode_shlibpath_var=$hardcode_shlibpath_var
5242 # Variables whose values should be saved in libtool wrapper scripts and
5243 # restored at relink time.
5244 variables_saved_for_relink="$variables_saved_for_relink"
5246 # Whether libtool must link a program against all its dependency libraries.
5247 link_all_deplibs=$link_all_deplibs
5249 # Compile-time system search path for libraries
5250 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
5252 # Run-time system search path for libraries
5253 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
5255 # Fix the shell variable \$srcfile for the compiler.
5256 fix_srcfile_path="$fix_srcfile_path"
5258 # Set to yes if exported symbols are required.
5259 always_export_symbols=$always_export_symbols
5261 # The commands to list exported symbols.
5262 export_symbols_cmds=$lt_export_symbols_cmds
5264 # The commands to extract the exported symbol list from a shared archive.
5265 extract_expsyms_cmds=$lt_extract_expsyms_cmds
5267 # Symbols that should not be listed in the preloaded symbols.
5268 exclude_expsyms=$lt_exclude_expsyms
5270 # Symbols that must always be exported.
5271 include_expsyms=$lt_include_expsyms
5273 # ### END LIBTOOL CONFIG
5279 cat <<\EOF >> "${ofile}T"
5281 # AIX sometimes has problems with the GCC collect2 program. For some
5282 # reason, if we set the COLLECT_NAMES environment variable, the problems
5283 # vanish in a puff of smoke.
5284 if test "X${COLLECT_NAMES+set}" != Xset; then
5286 export COLLECT_NAMES
5293 cygwin* | mingw* | pw32* | os2*)
5294 cat <<'EOF' >> "${ofile}T"
5295 # This is a source program that is used to create dlls on Windows
5296 # Don't remove nor modify the starting and closing comments
5297 # /* ltdll.c starts here */
5298 # #define WIN32_LEAN_AND_MEAN
5299 # #include <windows.h>
5300 # #undef WIN32_LEAN_AND_MEAN
5301 # #include <stdio.h>
5303 # #ifndef __CYGWIN__
5304 # # ifdef __CYGWIN32__
5305 # # define __CYGWIN__ __CYGWIN32__
5309 # #ifdef __cplusplus
5312 # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
5313 # #ifdef __cplusplus
5318 # #include <cygwin/cygwin_dll.h>
5319 # DECLARE_CYGWIN_DLL( DllMain );
5321 # HINSTANCE __hDllInstance_base;
5324 # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
5326 # __hDllInstance_base = hInst;
5329 # /* ltdll.c ends here */
5330 # This is a source program that is used to create import libraries
5331 # on Windows for dlls which lack them. Don't remove nor modify the
5332 # starting and closing comments
5333 # /* impgen.c starts here */
5334 # /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
5336 # This file is part of GNU libtool.
5338 # This program is free software; you can redistribute it and/or modify
5339 # it under the terms of the GNU General Public License as published by
5340 # the Free Software Foundation; either version 2 of the License, or
5341 # (at your option) any later version.
5343 # This program is distributed in the hope that it will be useful,
5344 # but WITHOUT ANY WARRANTY; without even the implied warranty of
5345 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
5346 # GNU General Public License for more details.
5348 # You should have received a copy of the GNU General Public License
5349 # along with this program; if not, write to the Free Software
5350 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
5353 # #include <stdio.h> /* for printf() */
5354 # #include <unistd.h> /* for open(), lseek(), read() */
5355 # #include <fcntl.h> /* for O_RDONLY, O_BINARY */
5356 # #include <string.h> /* for strdup() */
5358 # /* O_BINARY isn't required (or even defined sometimes) under Unix */
5360 # #define O_BINARY 0
5363 # static unsigned int
5364 # pe_get16 (fd, offset)
5368 # unsigned char b[2];
5369 # lseek (fd, offset, SEEK_SET);
5371 # return b[0] + (b[1]<<8);
5374 # static unsigned int
5375 # pe_get32 (fd, offset)
5379 # unsigned char b[4];
5380 # lseek (fd, offset, SEEK_SET);
5382 # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
5385 # static unsigned int
5389 # unsigned char *b = ptr;
5390 # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
5399 # unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
5400 # unsigned long export_rva, export_size, nsections, secptr, expptr;
5401 # unsigned long name_rvas, nexp;
5402 # unsigned char *expdata, *erva;
5403 # char *filename, *dll_name;
5405 # filename = argv[1];
5407 # dll = open(filename, O_RDONLY|O_BINARY);
5411 # dll_name = filename;
5413 # for (i=0; filename[i]; i++)
5414 # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
5415 # dll_name = filename + i +1;
5417 # pe_header_offset = pe_get32 (dll, 0x3c);
5418 # opthdr_ofs = pe_header_offset + 4 + 20;
5419 # num_entries = pe_get32 (dll, opthdr_ofs + 92);
5421 # if (num_entries < 1) /* no exports */
5424 # export_rva = pe_get32 (dll, opthdr_ofs + 96);
5425 # export_size = pe_get32 (dll, opthdr_ofs + 100);
5426 # nsections = pe_get16 (dll, pe_header_offset + 4 +2);
5427 # secptr = (pe_header_offset + 4 + 20 +
5428 # pe_get16 (dll, pe_header_offset + 4 + 16));
5431 # for (i = 0; i < nsections; i++)
5434 # unsigned long secptr1 = secptr + 40 * i;
5435 # unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
5436 # unsigned long vsize = pe_get32 (dll, secptr1 + 16);
5437 # unsigned long fptr = pe_get32 (dll, secptr1 + 20);
5438 # lseek(dll, secptr1, SEEK_SET);
5439 # read(dll, sname, 8);
5440 # if (vaddr <= export_rva && vaddr+vsize > export_rva)
5442 # expptr = fptr + (export_rva - vaddr);
5443 # if (export_rva + export_size > vaddr + vsize)
5444 # export_size = vsize - (export_rva - vaddr);
5449 # expdata = (unsigned char*)malloc(export_size);
5450 # lseek (dll, expptr, SEEK_SET);
5451 # read (dll, expdata, export_size);
5452 # erva = expdata - export_rva;
5454 # nexp = pe_as32 (expdata+24);
5455 # name_rvas = pe_as32 (expdata+32);
5457 # printf ("EXPORTS\n");
5458 # for (i = 0; i<nexp; i++)
5460 # unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
5461 # printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
5466 # /* impgen.c ends here */
5472 # We use sed instead of cat because bash on DJGPP gets confused if
5473 # if finds mixed CR/LF and LF-only lines. Since sed operates in
5474 # text mode, it properly converts lines to CR/LF. This bash problem
5475 # is reportedly fixed, but why not run on old versions too?
5476 sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
5478 mv -f "${ofile}T" "$ofile" || \
5479 (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
5488 # Check whether --with-system-libtool or --without-system-libtool was given.
5489 if test "${with_system_libtool+set}" = set; then
5490 withval="$with_system_libtool"
5491 # Extract the first word of "libtool", so it can be a program name with args.
5492 set dummy libtool; ac_word=$2
5493 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5494 echo "configure:5495: checking for $ac_word" >&5
5495 if eval "test \"`echo '$''{'ac_cv_path_LIBTOOL'+set}'`\" = set"; then
5496 echo $ac_n "(cached) $ac_c" 1>&6
5500 ac_cv_path_LIBTOOL="$LIBTOOL" # Let the user override the test with a path.
5503 ac_cv_path_LIBTOOL="$LIBTOOL" # Let the user override the test with a dos path.
5506 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5507 ac_dummy="$PATH:/usr/local/bin"
5508 for ac_dir in $ac_dummy; do
5509 test -z "$ac_dir" && ac_dir=.
5510 if test -f $ac_dir/$ac_word; then
5511 ac_cv_path_LIBTOOL="$ac_dir/$ac_word"
5519 LIBTOOL="$ac_cv_path_LIBTOOL"
5520 if test -n "$LIBTOOL"; then
5521 echo "$ac_t""$LIBTOOL" 1>&6
5523 echo "$ac_t""no" 1>&6
5528 LIBTOOL="`pwd`/libtool"
5533 # This can be used to rebuild libtool when needed
5534 LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
5536 # Prevent multiple expansion
5545 # Check whether --enable-strict-dependencies or --disable-strict-dependencies was given.
5546 if test "${enable_strict_dependencies+set}" = set; then
5547 enableval="$enable_strict_dependencies"
5552 logdir='${localstatedir}/log/radius'
5553 echo $ac_n "checking logdir""... $ac_c" 1>&6
5554 echo "configure:5555: checking logdir" >&5
5555 # Check whether --with-logdir or --without-logdir was given.
5556 if test "${with_logdir+set}" = set; then
5557 withval="$with_logdir"
5560 { echo "configure: error: Need logdir" 1>&2; exit 1; }
5572 echo "$ac_t""$logdir" 1>&6
5574 radacctdir='${logdir}/radacct'
5575 echo $ac_n "checking radacctdir""... $ac_c" 1>&6
5576 echo "configure:5577: checking radacctdir" >&5
5577 # Check whether --with-radacctdir or --without-radacctdir was given.
5578 if test "${with_radacctdir+set}" = set; then
5579 withval="$with_radacctdir"
5582 { echo "configure: error: Need radacctdir" 1>&2; exit 1; }
5587 radacctdir="$withval"
5594 echo "$ac_t""$radacctdir" 1>&6
5596 raddbdir='${sysconfdir}/raddb'
5597 echo $ac_n "checking raddbdir""... $ac_c" 1>&6
5598 echo "configure:5599: checking raddbdir" >&5
5599 # Check whether --with-raddbdir or --without-raddbdir was given.
5600 if test "${with_raddbdir+set}" = set; then
5601 withval="$with_raddbdir"
5604 { echo "configure: error: Need raddbdir" 1>&2; exit 1; }
5616 echo "$ac_t""$raddbdir" 1>&6
5619 # Check whether --with-ascend-binary or --without-ascend-binary was given.
5620 if test "${with_ascend_binary+set}" = set; then
5621 withval="$with_ascend_binary"
5631 if test "X$ASCEND_BINARY" = "Xyes"; then
5632 cat >> confdefs.h <<\EOF
5633 #define ASCEND_BINARY 1
5639 # Check whether --with-threads or --without-threads was given.
5640 if test "${with_threads+set}" = set; then
5641 withval="$with_threads"
5653 # Check whether --with-snmp or --without-snmp was given.
5654 if test "${with_snmp+set}" = set; then
5655 withval="$with_snmp"
5666 rad_enable_largefiles=no
5667 # Check whether --with-large-files or --without-large-files was given.
5668 if test "${with_large_files+set}" = set; then
5669 withval="$with_large_files"
5672 rad_enable_largefiles=yes
5684 # Check whether --with-static_modules or --without-static_modules was given.
5685 if test "${with_static_modules+set}" = set; then
5686 withval="$with_static_modules"
5688 for i in $withval; do
5689 STATIC_MODULES="$STATIC_MODULES -dlpreopen ../modules/rlm_$i/rlm_$i.la"
5695 # Check whether --enable-developer or --disable-developer was given.
5696 if test "${enable_developer+set}" = set; then
5697 enableval="$enable_developer"
5698 case "$enableval" in
5709 if test "x$developer" != "xno" -a -d $srcdir/CVS; then
5714 # Check whether --with-experimental-modules or --without-experimental-modules was given.
5715 if test "${with_experimental_modules+set}" = set; then
5716 withval="$with_experimental_modules"
5727 # Check whether --with-openssl-includes or --without-openssl-includes was given.
5728 if test "${with_openssl_includes+set}" = set; then
5729 withval="$with_openssl_includes"
5738 # Check whether --with-openssl-libraries or --without-openssl-libraries was given.
5739 if test "${with_openssl_libraries+set}" = set; then
5740 withval="$with_openssl_libraries"
5751 # Check whether --with-rlm-FOO-lib-dir or --without-rlm-FOO-lib-dir was given.
5752 if test "${with_rlm_FOO_lib_dir+set}" = set; then
5753 withval="$with_rlm_FOO_lib_dir"
5762 # Check whether --with-rlm-FOO-include-dir or --without-rlm-FOO-include-dir was given.
5763 if test "${with_rlm_FOO_include_dir+set}" = set; then
5764 withval="$with_rlm_FOO_include_dir"
5775 CHECKRAD=checkrad.pl
5776 # Extract the first word of "perl", so it can be a program name with args.
5777 set dummy perl; ac_word=$2
5778 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5779 echo "configure:5780: checking for $ac_word" >&5
5780 if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
5781 echo $ac_n "(cached) $ac_c" 1>&6
5785 ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
5788 ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
5791 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5793 for ac_dir in $ac_dummy; do
5794 test -z "$ac_dir" && ac_dir=.
5795 if test -f $ac_dir/$ac_word; then
5796 ac_cv_path_PERL="$ac_dir/$ac_word"
5801 test -z "$ac_cv_path_PERL" && ac_cv_path_PERL="/usr/local/bin/perl"
5805 PERL="$ac_cv_path_PERL"
5806 if test -n "$PERL"; then
5807 echo "$ac_t""$PERL" 1>&6
5809 echo "$ac_t""no" 1>&6
5812 if test "x$ac_cv_path_PERL" = "x"; then
5813 echo "configure: warning: perl not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
5815 # Extract the first word of "snmpget", so it can be a program name with args.
5816 set dummy snmpget; ac_word=$2
5817 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5818 echo "configure:5819: checking for $ac_word" >&5
5819 if eval "test \"`echo '$''{'ac_cv_path_SNMPGET'+set}'`\" = set"; then
5820 echo $ac_n "(cached) $ac_c" 1>&6
5824 ac_cv_path_SNMPGET="$SNMPGET" # Let the user override the test with a path.
5827 ac_cv_path_SNMPGET="$SNMPGET" # Let the user override the test with a dos path.
5830 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5832 for ac_dir in $ac_dummy; do
5833 test -z "$ac_dir" && ac_dir=.
5834 if test -f $ac_dir/$ac_word; then
5835 ac_cv_path_SNMPGET="$ac_dir/$ac_word"
5843 SNMPGET="$ac_cv_path_SNMPGET"
5844 if test -n "$SNMPGET"; then
5845 echo "$ac_t""$SNMPGET" 1>&6
5847 echo "$ac_t""no" 1>&6
5850 if test "x$ac_cv_path_SNMPGET" = "x"; then
5851 echo "configure: warning: snmpget not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
5854 # Extract the first word of "snmpwalk", so it can be a program name with args.
5855 set dummy snmpwalk; ac_word=$2
5856 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5857 echo "configure:5858: checking for $ac_word" >&5
5858 if eval "test \"`echo '$''{'ac_cv_path_SNMPWALK'+set}'`\" = set"; then
5859 echo $ac_n "(cached) $ac_c" 1>&6
5863 ac_cv_path_SNMPWALK="$SNMPWALK" # Let the user override the test with a path.
5866 ac_cv_path_SNMPWALK="$SNMPWALK" # Let the user override the test with a dos path.
5869 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5871 for ac_dir in $ac_dummy; do
5872 test -z "$ac_dir" && ac_dir=.
5873 if test -f $ac_dir/$ac_word; then
5874 ac_cv_path_SNMPWALK="$ac_dir/$ac_word"
5882 SNMPWALK="$ac_cv_path_SNMPWALK"
5883 if test -n "$SNMPWALK"; then
5884 echo "$ac_t""$SNMPWALK" 1>&6
5886 echo "$ac_t""no" 1>&6
5889 if test "x$ac_cv_path_SNMPWALK" = "x"; then
5890 echo "configure: warning: snmpwalk not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
5893 # Extract the first word of "rusers", so it can be a program name with args.
5894 set dummy rusers; ac_word=$2
5895 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5896 echo "configure:5897: checking for $ac_word" >&5
5897 if eval "test \"`echo '$''{'ac_cv_path_RUSERS'+set}'`\" = set"; then
5898 echo $ac_n "(cached) $ac_c" 1>&6
5902 ac_cv_path_RUSERS="$RUSERS" # Let the user override the test with a path.
5905 ac_cv_path_RUSERS="$RUSERS" # Let the user override the test with a dos path.
5908 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5910 for ac_dir in $ac_dummy; do
5911 test -z "$ac_dir" && ac_dir=.
5912 if test -f $ac_dir/$ac_word; then
5913 ac_cv_path_RUSERS="$ac_dir/$ac_word"
5918 test -z "$ac_cv_path_RUSERS" && ac_cv_path_RUSERS="/usr/bin/rusers"
5922 RUSERS="$ac_cv_path_RUSERS"
5923 if test -n "$RUSERS"; then
5924 echo "$ac_t""$RUSERS" 1>&6
5926 echo "$ac_t""no" 1>&6
5930 missing_dir=`cd $ac_aux_dir && pwd`
5931 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
5932 echo "configure:5933: checking for working aclocal" >&5
5933 # Run test in a subshell; some versions of sh will print an error if
5934 # an executable is not found, even if stderr is redirected.
5935 # Redirect stdin to placate older versions of autoconf. Sigh.
5936 if (aclocal --version) < /dev/null > /dev/null 2>&1; then
5938 echo "$ac_t""found" 1>&6
5940 ACLOCAL="$missing_dir/missing aclocal"
5941 echo "$ac_t""missing" 1>&6
5944 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
5945 echo "configure:5946: checking for working autoconf" >&5
5946 # Run test in a subshell; some versions of sh will print an error if
5947 # an executable is not found, even if stderr is redirected.
5948 # Redirect stdin to placate older versions of autoconf. Sigh.
5949 if (autoconf --version) < /dev/null > /dev/null 2>&1; then
5951 echo "$ac_t""found" 1>&6
5953 AUTOCONF="$missing_dir/missing autoconf"
5954 echo "$ac_t""missing" 1>&6
5957 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
5958 echo "configure:5959: checking for working autoheader" >&5
5959 # Run test in a subshell; some versions of sh will print an error if
5960 # an executable is not found, even if stderr is redirected.
5961 # Redirect stdin to placate older versions of autoconf. Sigh.
5962 if (autoheader --version) < /dev/null > /dev/null 2>&1; then
5963 AUTOHEADER=autoheader
5964 echo "$ac_t""found" 1>&6
5966 AUTOHEADER="$missing_dir/missing autoheader"
5967 echo "$ac_t""missing" 1>&6
5971 # Extract the first word of "locate", so it can be a program name with args.
5972 set dummy locate; ac_word=$2
5973 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
5974 echo "configure:5975: checking for $ac_word" >&5
5975 if eval "test \"`echo '$''{'ac_cv_path_LOCATE'+set}'`\" = set"; then
5976 echo $ac_n "(cached) $ac_c" 1>&6
5980 ac_cv_path_LOCATE="$LOCATE" # Let the user override the test with a path.
5983 ac_cv_path_LOCATE="$LOCATE" # Let the user override the test with a dos path.
5986 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
5988 for ac_dir in $ac_dummy; do
5989 test -z "$ac_dir" && ac_dir=.
5990 if test -f $ac_dir/$ac_word; then
5991 ac_cv_path_LOCATE="$ac_dir/$ac_word"
5999 LOCATE="$ac_cv_path_LOCATE"
6000 if test -n "$LOCATE"; then
6001 echo "$ac_t""$LOCATE" 1>&6
6003 echo "$ac_t""no" 1>&6
6006 # Extract the first word of "dirname", so it can be a program name with args.
6007 set dummy dirname; ac_word=$2
6008 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
6009 echo "configure:6010: checking for $ac_word" >&5
6010 if eval "test \"`echo '$''{'ac_cv_path_DIRNAME'+set}'`\" = set"; then
6011 echo $ac_n "(cached) $ac_c" 1>&6
6015 ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a path.
6018 ac_cv_path_DIRNAME="$DIRNAME" # Let the user override the test with a dos path.
6021 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
6023 for ac_dir in $ac_dummy; do
6024 test -z "$ac_dir" && ac_dir=.
6025 if test -f $ac_dir/$ac_word; then
6026 ac_cv_path_DIRNAME="$ac_dir/$ac_word"
6034 DIRNAME="$ac_cv_path_DIRNAME"
6035 if test -n "$DIRNAME"; then
6036 echo "$ac_t""$DIRNAME" 1>&6
6038 echo "$ac_t""no" 1>&6
6041 # Extract the first word of "grep", so it can be a program name with args.
6042 set dummy grep; ac_word=$2
6043 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
6044 echo "configure:6045: checking for $ac_word" >&5
6045 if eval "test \"`echo '$''{'ac_cv_path_GREP'+set}'`\" = set"; then
6046 echo $ac_n "(cached) $ac_c" 1>&6
6050 ac_cv_path_GREP="$GREP" # Let the user override the test with a path.
6053 ac_cv_path_GREP="$GREP" # Let the user override the test with a dos path.
6056 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
6058 for ac_dir in $ac_dummy; do
6059 test -z "$ac_dir" && ac_dir=.
6060 if test -f $ac_dir/$ac_word; then
6061 ac_cv_path_GREP="$ac_dir/$ac_word"
6069 GREP="$ac_cv_path_GREP"
6070 if test -n "$GREP"; then
6071 echo "$ac_t""$GREP" 1>&6
6073 echo "$ac_t""no" 1>&6
6079 if test "x$WITH_THREADS" = "xyes"; then
6080 if test $ac_cv_prog_suncc = "yes"; then
6081 CFLAGS="$CFLAGS -mt"
6084 for ac_hdr in pthread.h
6086 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
6087 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
6088 echo "configure:6089: checking for $ac_hdr" >&5
6089 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
6090 echo $ac_n "(cached) $ac_c" 1>&6
6092 cat > conftest.$ac_ext <<EOF
6093 #line 6094 "configure"
6094 #include "confdefs.h"
6097 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6098 { (eval echo configure:6099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6099 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6100 if test -z "$ac_err"; then
6102 eval "ac_cv_header_$ac_safe=yes"
6105 echo "configure: failed program was:" >&5
6106 cat conftest.$ac_ext >&5
6108 eval "ac_cv_header_$ac_safe=no"
6112 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
6113 echo "$ac_t""yes" 1>&6
6114 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
6115 cat >> confdefs.h <<EOF
6116 #define $ac_tr_hdr 1
6120 echo "$ac_t""no" 1>&6
6126 echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
6127 echo "configure:6128: checking for pthread_create in -lpthread" >&5
6128 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
6129 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6130 echo $ac_n "(cached) $ac_c" 1>&6
6132 ac_save_LIBS="$LIBS"
6133 LIBS="-lpthread $LIBS"
6134 cat > conftest.$ac_ext <<EOF
6135 #line 6136 "configure"
6136 #include "confdefs.h"
6137 /* Override any gcc2 internal prototype to avoid an error. */
6138 /* We use char because int might match the return type of a gcc2
6139 builtin and then its argument prototype would still apply. */
6140 char pthread_create();
6146 if { (eval echo configure:6147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6148 eval "ac_cv_lib_$ac_lib_var=yes"
6150 echo "configure: failed program was:" >&5
6151 cat conftest.$ac_ext >&5
6153 eval "ac_cv_lib_$ac_lib_var=no"
6156 LIBS="$ac_save_LIBS"
6159 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6160 echo "$ac_t""yes" 1>&6
6161 CFLAGS="$CFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS"
6162 LIBS="$LIBS -lpthread"
6164 echo "$ac_t""no" 1>&6
6165 echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
6166 echo "configure:6167: checking for pthread_create in -lc_r" >&5
6167 ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
6168 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6169 echo $ac_n "(cached) $ac_c" 1>&6
6171 ac_save_LIBS="$LIBS"
6173 cat > conftest.$ac_ext <<EOF
6174 #line 6175 "configure"
6175 #include "confdefs.h"
6176 /* Override any gcc2 internal prototype to avoid an error. */
6177 /* We use char because int might match the return type of a gcc2
6178 builtin and then its argument prototype would still apply. */
6179 char pthread_create();
6185 if { (eval echo configure:6186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6187 eval "ac_cv_lib_$ac_lib_var=yes"
6189 echo "configure: failed program was:" >&5
6190 cat conftest.$ac_ext >&5
6192 eval "ac_cv_lib_$ac_lib_var=no"
6195 LIBS="$ac_save_LIBS"
6198 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6199 echo "$ac_t""yes" 1>&6
6200 CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE"
6202 echo "$ac_t""no" 1>&6
6212 if test "x$WITH_THREADS" != "xyes"; then
6214 ac_cv_header_pthread_h="no"
6219 echo $ac_n "checking for library containing sem_init""... $ac_c" 1>&6
6220 echo "configure:6221: checking for library containing sem_init" >&5
6221 if eval "test \"`echo '$''{'ac_cv_search_sem_init'+set}'`\" = set"; then
6222 echo $ac_n "(cached) $ac_c" 1>&6
6224 ac_func_search_save_LIBS="$LIBS"
6225 ac_cv_search_sem_init="no"
6226 cat > conftest.$ac_ext <<EOF
6227 #line 6228 "configure"
6228 #include "confdefs.h"
6229 /* Override any gcc2 internal prototype to avoid an error. */
6230 /* We use char because int might match the return type of a gcc2
6231 builtin and then its argument prototype would still apply. */
6238 if { (eval echo configure:6239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6240 ac_cv_search_sem_init="none required"
6242 echo "configure: failed program was:" >&5
6243 cat conftest.$ac_ext >&5
6246 test "$ac_cv_search_sem_init" = "no" && for i in pthread sem posix4 rt; do
6247 LIBS="-l$i $ac_func_search_save_LIBS"
6248 cat > conftest.$ac_ext <<EOF
6249 #line 6250 "configure"
6250 #include "confdefs.h"
6251 /* Override any gcc2 internal prototype to avoid an error. */
6252 /* We use char because int might match the return type of a gcc2
6253 builtin and then its argument prototype would still apply. */
6260 if { (eval echo configure:6261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6262 ac_cv_search_sem_init="-l$i"
6265 echo "configure: failed program was:" >&5
6266 cat conftest.$ac_ext >&5
6270 LIBS="$ac_func_search_save_LIBS"
6273 echo "$ac_t""$ac_cv_search_sem_init" 1>&6
6274 if test "$ac_cv_search_sem_init" != "no"; then
6275 test "$ac_cv_search_sem_init" = "none required" || LIBS="$ac_cv_search_sem_init $LIBS"
6278 { echo "configure: error: -lsem not found. You may want to download it from ftp://ftp.to.gd-es.com/pub/BSDI/libsem.tar.bz2 or ftp://ftp.freeradius.org/pub/radius/contrib/libsem.tar.gz" 1>&2; exit 1; }
6283 echo $ac_n "checking for getsockname in -lsocket""... $ac_c" 1>&6
6284 echo "configure:6285: checking for getsockname in -lsocket" >&5
6285 ac_lib_var=`echo socket'_'getsockname | sed 'y%./+-%__p_%'`
6286 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6287 echo $ac_n "(cached) $ac_c" 1>&6
6289 ac_save_LIBS="$LIBS"
6290 LIBS="-lsocket $LIBS"
6291 cat > conftest.$ac_ext <<EOF
6292 #line 6293 "configure"
6293 #include "confdefs.h"
6294 /* Override any gcc2 internal prototype to avoid an error. */
6295 /* We use char because int might match the return type of a gcc2
6296 builtin and then its argument prototype would still apply. */
6303 if { (eval echo configure:6304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6305 eval "ac_cv_lib_$ac_lib_var=yes"
6307 echo "configure: failed program was:" >&5
6308 cat conftest.$ac_ext >&5
6310 eval "ac_cv_lib_$ac_lib_var=no"
6313 LIBS="$ac_save_LIBS"
6316 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6317 echo "$ac_t""yes" 1>&6
6318 ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
6319 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
6320 cat >> confdefs.h <<EOF
6321 #define $ac_tr_lib 1
6324 LIBS="-lsocket $LIBS"
6327 echo "$ac_t""no" 1>&6
6331 echo $ac_n "checking for inet_aton in -lresolv""... $ac_c" 1>&6
6332 echo "configure:6333: checking for inet_aton in -lresolv" >&5
6333 ac_lib_var=`echo resolv'_'inet_aton | sed 'y%./+-%__p_%'`
6334 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6335 echo $ac_n "(cached) $ac_c" 1>&6
6337 ac_save_LIBS="$LIBS"
6338 LIBS="-lresolv $LIBS"
6339 cat > conftest.$ac_ext <<EOF
6340 #line 6341 "configure"
6341 #include "confdefs.h"
6342 /* Override any gcc2 internal prototype to avoid an error. */
6343 /* We use char because int might match the return type of a gcc2
6344 builtin and then its argument prototype would still apply. */
6351 if { (eval echo configure:6352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6353 eval "ac_cv_lib_$ac_lib_var=yes"
6355 echo "configure: failed program was:" >&5
6356 cat conftest.$ac_ext >&5
6358 eval "ac_cv_lib_$ac_lib_var=no"
6361 LIBS="$ac_save_LIBS"
6364 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6365 echo "$ac_t""yes" 1>&6
6366 ac_tr_lib=HAVE_LIB`echo resolv | sed -e 's/[^a-zA-Z0-9_]/_/g' \
6367 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
6368 cat >> confdefs.h <<EOF
6369 #define $ac_tr_lib 1
6372 LIBS="-lresolv $LIBS"
6375 echo "$ac_t""no" 1>&6
6379 echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6
6380 echo "configure:6381: checking for inet_ntoa in -lnsl" >&5
6381 ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'`
6382 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6383 echo $ac_n "(cached) $ac_c" 1>&6
6385 ac_save_LIBS="$LIBS"
6387 cat > conftest.$ac_ext <<EOF
6388 #line 6389 "configure"
6389 #include "confdefs.h"
6390 /* Override any gcc2 internal prototype to avoid an error. */
6391 /* We use char because int might match the return type of a gcc2
6392 builtin and then its argument prototype would still apply. */
6399 if { (eval echo configure:6400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6401 eval "ac_cv_lib_$ac_lib_var=yes"
6403 echo "configure: failed program was:" >&5
6404 cat conftest.$ac_ext >&5
6406 eval "ac_cv_lib_$ac_lib_var=no"
6409 LIBS="$ac_save_LIBS"
6412 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6413 echo "$ac_t""yes" 1>&6
6414 ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
6415 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
6416 cat >> confdefs.h <<EOF
6417 #define $ac_tr_lib 1
6423 echo "$ac_t""no" 1>&6
6429 for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
6431 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
6432 echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
6433 echo "configure:6434: checking for $ac_hdr that defines DIR" >&5
6434 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
6435 echo $ac_n "(cached) $ac_c" 1>&6
6437 cat > conftest.$ac_ext <<EOF
6438 #line 6439 "configure"
6439 #include "confdefs.h"
6440 #include <sys/types.h>
6446 if { (eval echo configure:6447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
6448 eval "ac_cv_header_dirent_$ac_safe=yes"
6450 echo "configure: failed program was:" >&5
6451 cat conftest.$ac_ext >&5
6453 eval "ac_cv_header_dirent_$ac_safe=no"
6457 if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
6458 echo "$ac_t""yes" 1>&6
6459 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
6460 cat >> confdefs.h <<EOF
6461 #define $ac_tr_hdr 1
6463 ac_header_dirent=$ac_hdr; break
6465 echo "$ac_t""no" 1>&6
6468 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
6469 if test $ac_header_dirent = dirent.h; then
6470 echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
6471 echo "configure:6472: checking for opendir in -ldir" >&5
6472 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
6473 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6474 echo $ac_n "(cached) $ac_c" 1>&6
6476 ac_save_LIBS="$LIBS"
6478 cat > conftest.$ac_ext <<EOF
6479 #line 6480 "configure"
6480 #include "confdefs.h"
6481 /* Override any gcc2 internal prototype to avoid an error. */
6482 /* We use char because int might match the return type of a gcc2
6483 builtin and then its argument prototype would still apply. */
6490 if { (eval echo configure:6491: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6492 eval "ac_cv_lib_$ac_lib_var=yes"
6494 echo "configure: failed program was:" >&5
6495 cat conftest.$ac_ext >&5
6497 eval "ac_cv_lib_$ac_lib_var=no"
6500 LIBS="$ac_save_LIBS"
6503 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6504 echo "$ac_t""yes" 1>&6
6507 echo "$ac_t""no" 1>&6
6511 echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
6512 echo "configure:6513: checking for opendir in -lx" >&5
6513 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
6514 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
6515 echo $ac_n "(cached) $ac_c" 1>&6
6517 ac_save_LIBS="$LIBS"
6519 cat > conftest.$ac_ext <<EOF
6520 #line 6521 "configure"
6521 #include "confdefs.h"
6522 /* Override any gcc2 internal prototype to avoid an error. */
6523 /* We use char because int might match the return type of a gcc2
6524 builtin and then its argument prototype would still apply. */
6531 if { (eval echo configure:6532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
6533 eval "ac_cv_lib_$ac_lib_var=yes"
6535 echo "configure: failed program was:" >&5
6536 cat conftest.$ac_ext >&5
6538 eval "ac_cv_lib_$ac_lib_var=no"
6541 LIBS="$ac_save_LIBS"
6544 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
6545 echo "$ac_t""yes" 1>&6
6548 echo "$ac_t""no" 1>&6
6553 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
6554 echo "configure:6555: checking for ANSI C header files" >&5
6555 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
6556 echo $ac_n "(cached) $ac_c" 1>&6
6558 cat > conftest.$ac_ext <<EOF
6559 #line 6560 "configure"
6560 #include "confdefs.h"
6566 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6567 { (eval echo configure:6568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6568 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6569 if test -z "$ac_err"; then
6571 ac_cv_header_stdc=yes
6574 echo "configure: failed program was:" >&5
6575 cat conftest.$ac_ext >&5
6577 ac_cv_header_stdc=no
6581 if test $ac_cv_header_stdc = yes; then
6582 # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
6583 cat > conftest.$ac_ext <<EOF
6584 #line 6585 "configure"
6585 #include "confdefs.h"
6588 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6589 egrep "memchr" >/dev/null 2>&1; then
6593 ac_cv_header_stdc=no
6599 if test $ac_cv_header_stdc = yes; then
6600 # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
6601 cat > conftest.$ac_ext <<EOF
6602 #line 6603 "configure"
6603 #include "confdefs.h"
6606 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6607 egrep "free" >/dev/null 2>&1; then
6611 ac_cv_header_stdc=no
6617 if test $ac_cv_header_stdc = yes; then
6618 # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
6619 if test "$cross_compiling" = yes; then
6622 cat > conftest.$ac_ext <<EOF
6623 #line 6624 "configure"
6624 #include "confdefs.h"
6626 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
6627 #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
6628 #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
6629 int main () { int i; for (i = 0; i < 256; i++)
6630 if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
6634 if { (eval echo configure:6635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
6638 echo "configure: failed program was:" >&5
6639 cat conftest.$ac_ext >&5
6641 ac_cv_header_stdc=no
6649 echo "$ac_t""$ac_cv_header_stdc" 1>&6
6650 if test $ac_cv_header_stdc = yes; then
6651 cat >> confdefs.h <<\EOF
6652 #define STDC_HEADERS 1
6657 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
6658 echo "configure:6659: checking whether time.h and sys/time.h may both be included" >&5
6659 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
6660 echo $ac_n "(cached) $ac_c" 1>&6
6662 cat > conftest.$ac_ext <<EOF
6663 #line 6664 "configure"
6664 #include "confdefs.h"
6665 #include <sys/types.h>
6666 #include <sys/time.h>
6672 if { (eval echo configure:6673: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
6674 ac_cv_header_time=yes
6676 echo "configure: failed program was:" >&5
6677 cat conftest.$ac_ext >&5
6679 ac_cv_header_time=no
6684 echo "$ac_t""$ac_cv_header_time" 1>&6
6685 if test $ac_cv_header_time = yes; then
6686 cat >> confdefs.h <<\EOF
6687 #define TIME_WITH_SYS_TIME 1
6692 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
6693 echo "configure:6694: checking for sys/wait.h that is POSIX.1 compatible" >&5
6694 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
6695 echo $ac_n "(cached) $ac_c" 1>&6
6697 cat > conftest.$ac_ext <<EOF
6698 #line 6699 "configure"
6699 #include "confdefs.h"
6700 #include <sys/types.h>
6701 #include <sys/wait.h>
6703 #define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
6706 #define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
6711 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
6714 if { (eval echo configure:6715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
6716 ac_cv_header_sys_wait_h=yes
6718 echo "configure: failed program was:" >&5
6719 cat conftest.$ac_ext >&5
6721 ac_cv_header_sys_wait_h=no
6726 echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
6727 if test $ac_cv_header_sys_wait_h = yes; then
6728 cat >> confdefs.h <<\EOF
6729 #define HAVE_SYS_WAIT_H 1
6766 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
6767 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
6768 echo "configure:6769: checking for $ac_hdr" >&5
6769 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
6770 echo $ac_n "(cached) $ac_c" 1>&6
6772 cat > conftest.$ac_ext <<EOF
6773 #line 6774 "configure"
6774 #include "confdefs.h"
6777 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6778 { (eval echo configure:6779: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6779 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6780 if test -z "$ac_err"; then
6782 eval "ac_cv_header_$ac_safe=yes"
6785 echo "configure: failed program was:" >&5
6786 cat conftest.$ac_ext >&5
6788 eval "ac_cv_header_$ac_safe=no"
6792 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
6793 echo "$ac_t""yes" 1>&6
6794 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
6795 cat >> confdefs.h <<EOF
6796 #define $ac_tr_hdr 1
6800 echo "$ac_t""no" 1>&6
6806 ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
6807 echo $ac_n "checking for regex.h""... $ac_c" 1>&6
6808 echo "configure:6809: checking for regex.h" >&5
6809 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
6810 echo $ac_n "(cached) $ac_c" 1>&6
6812 cat > conftest.$ac_ext <<EOF
6813 #line 6814 "configure"
6814 #include "confdefs.h"
6817 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
6818 { (eval echo configure:6819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
6819 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
6820 if test -z "$ac_err"; then
6822 eval "ac_cv_header_$ac_safe=yes"
6825 echo "configure: failed program was:" >&5
6826 cat conftest.$ac_ext >&5
6828 eval "ac_cv_header_$ac_safe=no"
6832 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
6833 echo "$ac_t""yes" 1>&6
6834 cat >> confdefs.h <<\EOF
6835 #define HAVE_REGEX_H 1
6839 echo "$ac_t""no" 1>&6
6842 if test "x$ac_cv_header_regex_h" = "xyes"; then
6845 cat > conftest.$ac_ext <<EOF
6846 #line 6847 "configure"
6847 #include "confdefs.h"
6854 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6855 egrep "yes" >/dev/null 2>&1; then
6857 cat >> confdefs.h <<\EOF
6858 #define HAVE_REG_EXTENDED 1
6868 if test "x$ac_cv_header_sys_security_h" = "xyes" && test "x$ac_cv_header_prot_h" = "xyes"
6870 cat >> confdefs.h <<\EOF
6876 if test "x$ac_cv_header_sia_h" = "xyes" && test "x$ac_cv_header_siad_h" = "xyes"
6878 cat >> confdefs.h <<\EOF
6886 echo $ac_n "checking for off_t""... $ac_c" 1>&6
6887 echo "configure:6888: checking for off_t" >&5
6888 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
6889 echo $ac_n "(cached) $ac_c" 1>&6
6891 cat > conftest.$ac_ext <<EOF
6892 #line 6893 "configure"
6893 #include "confdefs.h"
6894 #include <sys/types.h>
6900 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6901 egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
6903 ac_cv_type_off_t=yes
6911 echo "$ac_t""$ac_cv_type_off_t" 1>&6
6912 if test $ac_cv_type_off_t = no; then
6913 cat >> confdefs.h <<\EOF
6919 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
6920 echo "configure:6921: checking for pid_t" >&5
6921 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
6922 echo $ac_n "(cached) $ac_c" 1>&6
6924 cat > conftest.$ac_ext <<EOF
6925 #line 6926 "configure"
6926 #include "confdefs.h"
6927 #include <sys/types.h>
6933 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6934 egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
6936 ac_cv_type_pid_t=yes
6944 echo "$ac_t""$ac_cv_type_pid_t" 1>&6
6945 if test $ac_cv_type_pid_t = no; then
6946 cat >> confdefs.h <<\EOF
6952 echo $ac_n "checking for size_t""... $ac_c" 1>&6
6953 echo "configure:6954: checking for size_t" >&5
6954 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
6955 echo $ac_n "(cached) $ac_c" 1>&6
6957 cat > conftest.$ac_ext <<EOF
6958 #line 6959 "configure"
6959 #include "confdefs.h"
6960 #include <sys/types.h>
6966 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6967 egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
6969 ac_cv_type_size_t=yes
6972 ac_cv_type_size_t=no
6977 echo "$ac_t""$ac_cv_type_size_t" 1>&6
6978 if test $ac_cv_type_size_t = no; then
6979 cat >> confdefs.h <<\EOF
6980 #define size_t unsigned
6985 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
6986 echo "configure:6987: checking for uid_t in sys/types.h" >&5
6987 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
6988 echo $ac_n "(cached) $ac_c" 1>&6
6990 cat > conftest.$ac_ext <<EOF
6991 #line 6992 "configure"
6992 #include "confdefs.h"
6993 #include <sys/types.h>
6995 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
6996 egrep "uid_t" >/dev/null 2>&1; then
6998 ac_cv_type_uid_t=yes
7007 echo "$ac_t""$ac_cv_type_uid_t" 1>&6
7008 if test $ac_cv_type_uid_t = no; then
7009 cat >> confdefs.h <<\EOF
7013 cat >> confdefs.h <<\EOF
7021 echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
7022 echo "configure:7023: checking for socklen_t" >&5
7023 if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
7024 echo $ac_n "(cached) $ac_c" 1>&6
7026 ac_cv_type_socklen_t=no
7027 cat > conftest.$ac_ext <<EOF
7028 #line 7029 "configure"
7029 #include "confdefs.h"
7030 #ifdef HAVE_SYS_TYPES_H
7031 #include <sys/types.h>
7033 #ifdef HAVE_SYS_SOCKET_H
7034 #include <sys/socket.h>
7041 if { (eval echo configure:7042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7043 ac_cv_type_socklen_t=yes
7045 echo "configure: failed program was:" >&5
7046 cat conftest.$ac_ext >&5
7053 echo "$ac_t""$ac_cv_type_socklen_t" 1>&6
7055 if test "$ac_cv_type_socklen_t" != "yes"; then
7056 cat >> confdefs.h <<\EOF
7057 #define socklen_t int
7064 echo $ac_n "checking for uint8_t""... $ac_c" 1>&6
7065 echo "configure:7066: checking for uint8_t" >&5
7066 if eval "test \"`echo '$''{'ac_cv_type_uint8_t'+set}'`\" = set"; then
7067 echo $ac_n "(cached) $ac_c" 1>&6
7069 ac_cv_type_uint8_t=no
7070 cat > conftest.$ac_ext <<EOF
7071 #line 7072 "configure"
7072 #include "confdefs.h"
7073 #ifdef HAVE_INTTYPES_H
7074 #include <inttypes.h>
7076 #ifdef HAVE_STDINT_H
7084 if { (eval echo configure:7085: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7086 ac_cv_type_uint8_t=yes
7088 echo "configure: failed program was:" >&5
7089 cat conftest.$ac_ext >&5
7096 echo "$ac_t""$ac_cv_type_uint8_t" 1>&6
7098 if test "$ac_cv_type_uint8_t" != "yes"; then
7099 cat >> confdefs.h <<\EOF
7100 #define uint8_t unsigned char
7107 echo $ac_n "checking for uint16_t""... $ac_c" 1>&6
7108 echo "configure:7109: checking for uint16_t" >&5
7109 if eval "test \"`echo '$''{'ac_cv_type_uint16_t'+set}'`\" = set"; then
7110 echo $ac_n "(cached) $ac_c" 1>&6
7112 ac_cv_type_uint16_t=no
7113 cat > conftest.$ac_ext <<EOF
7114 #line 7115 "configure"
7115 #include "confdefs.h"
7116 #ifdef HAVE_INTTYPES_H
7117 #include <inttypes.h>
7119 #ifdef HAVE_STDINT_H
7127 if { (eval echo configure:7128: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7129 ac_cv_type_uint16_t=yes
7131 echo "configure: failed program was:" >&5
7132 cat conftest.$ac_ext >&5
7139 echo "$ac_t""$ac_cv_type_uint16_t" 1>&6
7141 if test "$ac_cv_type_uint16_t" != "yes"; then
7142 cat >> confdefs.h <<\EOF
7143 #define uint16_t unsigned short
7150 echo $ac_n "checking for uint32_t""... $ac_c" 1>&6
7151 echo "configure:7152: checking for uint32_t" >&5
7152 if eval "test \"`echo '$''{'ac_cv_type_uint32_t'+set}'`\" = set"; then
7153 echo $ac_n "(cached) $ac_c" 1>&6
7155 ac_cv_type_uint32_t=no
7156 cat > conftest.$ac_ext <<EOF
7157 #line 7158 "configure"
7158 #include "confdefs.h"
7159 #ifdef HAVE_INTTYPES_H
7160 #include <inttypes.h>
7162 #ifdef HAVE_STDINT_H
7170 if { (eval echo configure:7171: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7172 ac_cv_type_uint32_t=yes
7174 echo "configure: failed program was:" >&5
7175 cat conftest.$ac_ext >&5
7182 echo "$ac_t""$ac_cv_type_uint32_t" 1>&6
7184 if test "$ac_cv_type_uint32_t" != "yes"; then
7185 cat >> confdefs.h <<\EOF
7186 #define uint32_t unsigned int
7215 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
7216 echo "configure:7217: checking for $ac_func" >&5
7217 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
7218 echo $ac_n "(cached) $ac_c" 1>&6
7220 cat > conftest.$ac_ext <<EOF
7221 #line 7222 "configure"
7222 #include "confdefs.h"
7223 /* System header to define __stub macros and hopefully few prototypes,
7224 which can conflict with char $ac_func(); below. */
7226 /* Override any gcc2 internal prototype to avoid an error. */
7227 /* We use char because int might match the return type of a gcc2
7228 builtin and then its argument prototype would still apply. */
7233 /* The GNU C library defines this for functions which it implements
7234 to always fail with ENOSYS. Some functions are actually named
7235 something starting with __ and the normal name is an alias. */
7236 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
7244 if { (eval echo configure:7245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7246 eval "ac_cv_func_$ac_func=yes"
7248 echo "configure: failed program was:" >&5
7249 cat conftest.$ac_ext >&5
7251 eval "ac_cv_func_$ac_func=no"
7256 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
7257 echo "$ac_t""yes" 1>&6
7258 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
7259 cat >> confdefs.h <<EOF
7260 #define $ac_tr_func 1
7264 echo "$ac_t""no" 1>&6
7279 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
7280 echo "configure:7281: checking whether $ac_func must be declared" >&5
7281 if eval "test \"`echo '$''{'radius_cv_decl_needed_$ac_func'+set}'`\" = set"; then
7282 echo $ac_n "(cached) $ac_c" 1>&6
7284 cat > conftest.$ac_ext <<EOF
7285 #line 7286 "configure"
7286 #include "confdefs.h"
7290 #ifdef HAVE_UNISTD_H
7299 #ifdef HAVE_RESOURCE_H
7300 #include <resource.h>
7302 #ifdef HAVE_GETOPT_H
7305 #ifdef HAVE_MALLOC_H
7314 #ifdef HAVE_SYS_SELECT_H
7315 #include <sys/select.h>
7323 #ifdef HAVE_SYSLOG_H
7326 #ifdef HAVE_INTTYPES_H
7327 #include <inttypes.h>
7329 #ifdef HAVE_STDINT_H
7332 #ifdef HAVE_ARPA_INET_H
7333 #include <arpa/inet.h>
7337 char *(*pfn) = (char *(*)) $ac_func
7340 if { (eval echo configure:7341: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7342 eval "radius_cv_decl_needed_$ac_func=no"
7344 echo "configure: failed program was:" >&5
7345 cat conftest.$ac_ext >&5
7347 eval "radius_cv_decl_needed_$ac_func=yes"
7352 if eval "test \"`echo '$radius_cv_decl_needed_'$ac_func`\" = yes"; then
7353 echo "$ac_t""yes" 1>&6
7354 radius_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
7355 cat >> confdefs.h <<EOF
7356 #define $radius_tr_decl 1
7360 echo "$ac_t""no" 1>&6
7366 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
7367 echo "configure:7368: checking return type of signal handlers" >&5
7368 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
7369 echo $ac_n "(cached) $ac_c" 1>&6
7371 cat > conftest.$ac_ext <<EOF
7372 #line 7373 "configure"
7373 #include "confdefs.h"
7374 #include <sys/types.h>
7380 extern "C" void (*signal (int, void (*)(int)))(int);
7382 void (*signal ()) ();
7389 if { (eval echo configure:7390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7391 ac_cv_type_signal=void
7393 echo "configure: failed program was:" >&5
7394 cat conftest.$ac_ext >&5
7396 ac_cv_type_signal=int
7401 echo "$ac_t""$ac_cv_type_signal" 1>&6
7402 cat >> confdefs.h <<EOF
7403 #define RETSIGTYPE $ac_cv_type_signal
7408 if test "x$ac_cv_header_utmpx_h" = "xyes"
7411 echo $ac_n "checking for ut_xtime in struct utmpx""... $ac_c" 1>&6
7412 echo "configure:7413: checking for ut_xtime in struct utmpx" >&5
7415 cat > conftest.$ac_ext <<EOF
7416 #line 7417 "configure"
7417 #include "confdefs.h"
7421 #define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
7425 int foo = offsetof(struct utmpx, ut_xtime)
7428 if { (eval echo configure:7429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7432 echo "configure: failed program was:" >&5
7433 cat conftest.$ac_ext >&5
7439 ac_safe_type=`echo "struct utmpx" | sed 'y% %_%'`
7440 if test "x$has_element" != "x"; then
7441 echo "$ac_t""yes" 1>&6
7442 eval "ac_cv_type_${ac_safe_type}_has_ut_xtime=yes"
7444 echo "$ac_t""no" 1>&6
7445 eval "ac_cv_type_${ac_safe_type}_has_ut_xtime="
7448 if test "x$ac_cv_type_struct_utmpx_has_ut_xtime" = "x"
7450 cat >> confdefs.h <<\EOF
7451 #define ut_xtime ut_tv.tv_sec
7458 echo $ac_n "checking for working const""... $ac_c" 1>&6
7459 echo "configure:7460: checking for working const" >&5
7460 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
7461 echo $ac_n "(cached) $ac_c" 1>&6
7463 cat > conftest.$ac_ext <<EOF
7464 #line 7465 "configure"
7465 #include "confdefs.h"
7469 /* Ultrix mips cc rejects this. */
7470 typedef int charset[2]; const charset x;
7471 /* SunOS 4.1.1 cc rejects this. */
7472 char const *const *ccp;
7474 /* NEC SVR4.0.2 mips cc rejects this. */
7475 struct point {int x, y;};
7476 static struct point const zero = {0,0};
7477 /* AIX XL C 1.02.0.0 rejects this.
7478 It does not let you subtract one const X* pointer from another in an arm
7479 of an if-expression whose if-part is not a constant expression */
7480 const char *g = "string";
7481 ccp = &g + (g ? g-g : 0);
7482 /* HPUX 7.0 cc rejects these. */
7485 ccp = (char const *const *) p;
7486 { /* SCO 3.2v4 cc rejects this. */
7488 char const *s = 0 ? (char *) 0 : (char const *) 0;
7492 { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
7494 const int *foo = &x[0];
7497 { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
7498 typedef const int *iptr;
7502 { /* AIX XL C 1.02.0.0 rejects this saying
7503 "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
7504 struct s { int j; const int *ap[3]; };
7505 struct s *b; b->j = 5;
7507 { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
7513 if { (eval echo configure:7514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7517 echo "configure: failed program was:" >&5
7518 cat conftest.$ac_ext >&5
7525 echo "$ac_t""$ac_cv_c_const" 1>&6
7526 if test $ac_cv_c_const = no; then
7527 cat >> confdefs.h <<\EOF
7534 echo $ac_n "checking type of OS""... $ac_c" 1>&6
7535 echo "configure:7536: checking type of OS" >&5
7537 echo "$ac_t""$OS" 1>&6
7538 if test "$OS" = "OS/2"; then
7545 if test "x$GCC" = "xyes"; then
7546 CFLAGS="$CFLAGS -Wall -D_GNU_SOURCE"
7549 echo $ac_n "checking for developer gcc flags""... $ac_c" 1>&6
7550 echo "configure:7551: checking for developer gcc flags" >&5
7551 if test "x$developer" = "xyes" -a "x$GCC" = "xyes"; then
7552 devflags="-g -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -W -Wredundant-decls -Wundef"
7553 CFLAGS="$CFLAGS $devflags"
7555 echo "$ac_t""yes. Using $devflags" 1>&6
7558 CFLAGS="$CFLAGS -DNDEBUG"
7560 echo "$ac_t""no." 1>&6
7564 echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
7565 echo "configure:7566: checking for crypt in -lcrypt" >&5
7566 ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
7567 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
7568 echo $ac_n "(cached) $ac_c" 1>&6
7570 ac_save_LIBS="$LIBS"
7571 LIBS="-lcrypt $LIBS"
7572 cat > conftest.$ac_ext <<EOF
7573 #line 7574 "configure"
7574 #include "confdefs.h"
7575 /* Override any gcc2 internal prototype to avoid an error. */
7576 /* We use char because int might match the return type of a gcc2
7577 builtin and then its argument prototype would still apply. */
7584 if { (eval echo configure:7585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7586 eval "ac_cv_lib_$ac_lib_var=yes"
7588 echo "configure: failed program was:" >&5
7589 cat conftest.$ac_ext >&5
7591 eval "ac_cv_lib_$ac_lib_var=no"
7594 LIBS="$ac_save_LIBS"
7597 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
7598 echo "$ac_t""yes" 1>&6
7602 echo "$ac_t""no" 1>&6
7605 if test "$CRYPTLIB" != ""; then
7606 cat >> confdefs.h <<\EOF
7607 #define HAVE_CRYPT 1
7611 echo $ac_n "checking for crypt""... $ac_c" 1>&6
7612 echo "configure:7613: checking for crypt" >&5
7613 if eval "test \"`echo '$''{'ac_cv_func_crypt'+set}'`\" = set"; then
7614 echo $ac_n "(cached) $ac_c" 1>&6
7616 cat > conftest.$ac_ext <<EOF
7617 #line 7618 "configure"
7618 #include "confdefs.h"
7619 /* System header to define __stub macros and hopefully few prototypes,
7620 which can conflict with char crypt(); below. */
7622 /* Override any gcc2 internal prototype to avoid an error. */
7623 /* We use char because int might match the return type of a gcc2
7624 builtin and then its argument prototype would still apply. */
7629 /* The GNU C library defines this for functions which it implements
7630 to always fail with ENOSYS. Some functions are actually named
7631 something starting with __ and the normal name is an alias. */
7632 #if defined (__stub_crypt) || defined (__stub___crypt)
7640 if { (eval echo configure:7641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7642 eval "ac_cv_func_crypt=yes"
7644 echo "configure: failed program was:" >&5
7645 cat conftest.$ac_ext >&5
7647 eval "ac_cv_func_crypt=no"
7652 if eval "test \"`echo '$ac_cv_func_'crypt`\" = yes"; then
7653 echo "$ac_t""yes" 1>&6
7654 cat >> confdefs.h <<\EOF
7655 #define HAVE_CRYPT 1
7659 echo "$ac_t""no" 1>&6
7664 echo $ac_n "checking for setkey in -lcipher""... $ac_c" 1>&6
7665 echo "configure:7666: checking for setkey in -lcipher" >&5
7666 ac_lib_var=`echo cipher'_'setkey | sed 'y%./+-%__p_%'`
7667 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
7668 echo $ac_n "(cached) $ac_c" 1>&6
7670 ac_save_LIBS="$LIBS"
7671 LIBS="-lcipher $LIBS"
7672 cat > conftest.$ac_ext <<EOF
7673 #line 7674 "configure"
7674 #include "confdefs.h"
7675 /* Override any gcc2 internal prototype to avoid an error. */
7676 /* We use char because int might match the return type of a gcc2
7677 builtin and then its argument prototype would still apply. */
7684 if { (eval echo configure:7685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7686 eval "ac_cv_lib_$ac_lib_var=yes"
7688 echo "configure: failed program was:" >&5
7689 cat conftest.$ac_ext >&5
7691 eval "ac_cv_lib_$ac_lib_var=no"
7694 LIBS="$ac_save_LIBS"
7697 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
7698 echo "$ac_t""yes" 1>&6
7699 CRYPTLIB="${CRYPTLIB} -lcipher"
7702 echo "$ac_t""no" 1>&6
7707 if test "x$WITH_SNMP" = "xyes"; then
7712 echo $ac_n "checking for asn1.h,snmp.h,snmp_impl.h""... $ac_c" 1>&6
7713 echo "configure:7714: checking for asn1.h,snmp.h,snmp_impl.h" >&5
7715 cat > conftest.$ac_ext <<EOF
7716 #line 7717 "configure"
7717 #include "confdefs.h"
7719 #ifdef HAVE_SYS_TYPES_H
7720 #include <sys/types.h>
7722 #ifdef HAVE_STDINT_H
7731 #ifdef HAVE_UNISTD_H
7734 #include <ucd-snmp/asn1.h>
7735 #include <ucd-snmp/snmp.h>
7736 #include <ucd-snmp/snmp_impl.h>
7741 if { (eval echo configure:7742: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7743 SNMP_INCLUDE="";ucdsnmp=yes
7745 echo "configure: failed program was:" >&5
7746 cat conftest.$ac_ext >&5
7752 if test "x$SNMP_INCLUDE" = "x"; then
7753 old_CFLAGS="$CFLAGS"
7754 for try in /usr/include /usr/local/include $snmp_include_dir; do
7755 CFLAGS="$old_CFLAGS -I$try"
7756 cat > conftest.$ac_ext <<EOF
7757 #line 7758 "configure"
7758 #include "confdefs.h"
7760 #ifdef HAVE_SYS_TYPES_H
7761 #include <sys/types.h>
7763 #ifdef HAVE_STDINT_H
7772 #ifdef HAVE_UNISTD_H
7775 #include <ucd-snmp/asn1.h>
7776 #include <ucd-snmp/snmp.h>
7777 #include <ucd-snmp/snmp_impl.h>
7782 if { (eval echo configure:7783: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7784 SNMP_INCLUDE="-I$try";ucdsnmp=yes
7786 echo "configure: failed program was:" >&5
7787 cat conftest.$ac_ext >&5
7792 if test "x$SNMP_INCLUDE" != "x"; then
7796 CFLAGS="$old_CFLAGS"
7799 if test "x$SNMP_INCLUDE" = "x"; then
7800 old_CFLAGS="$CFLAGS"
7801 for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
7802 CFLAGS="$old_CFLAGS -I$try"
7803 cat > conftest.$ac_ext <<EOF
7804 #line 7805 "configure"
7805 #include "confdefs.h"
7807 #ifdef HAVE_SYS_TYPES_H
7808 #include <sys/types.h>
7810 #ifdef HAVE_STDINT_H
7819 #ifdef HAVE_UNISTD_H
7824 #include <snmp_impl.h>
7829 if { (eval echo configure:7830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7833 echo "configure: failed program was:" >&5
7834 cat conftest.$ac_ext >&5
7839 if test "x$SNMP_INCLUDE" != "x"; then
7843 CFLAGS="$old_CFLAGS"
7846 if test "x$SNMP_INCLUDE" = "x"; then
7847 old_CFLAGS="$CFLAGS"
7848 for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
7849 CFLAGS="$old_CFLAGS -I$try"
7850 cat > conftest.$ac_ext <<EOF
7851 #line 7852 "configure"
7852 #include "confdefs.h"
7854 #ifdef HAVE_SYS_TYPES_H
7855 #include <sys/types.h>
7857 #ifdef HAVE_STDINT_H
7866 #ifdef HAVE_UNISTD_H
7871 #include <snmp_impl.h>
7876 if { (eval echo configure:7877: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
7878 SNMP_INCLUDE="-I$try"
7880 echo "configure: failed program was:" >&5
7881 cat conftest.$ac_ext >&5
7886 if test "x$SNMP_INCLUDE" != "x"; then
7890 CFLAGS="$old_CFLAGS"
7893 if test "x$SNMP_INCLUDE" = "x"; then
7894 echo "$ac_t""no" 1>&6
7896 if test "x$ucdsnmp" = "xyes"; then
7897 echo "$ac_t""(ucd-snmp)yes" 1>&6
7898 cat >> confdefs.h <<\EOF
7899 #define HAVE_UCD_SNMP_ASN1_SNMP_SNMPIMPL_H 1
7903 echo "$ac_t""yes" 1>&6
7904 cat >> confdefs.h <<\EOF
7905 #define HAVE_ASN1_SNMP_SNMPIMPL_H 1
7909 echo $ac_n "checking for snmp_build_var_op in -lsnmp""... $ac_c" 1>&6
7910 echo "configure:7911: checking for snmp_build_var_op in -lsnmp" >&5
7913 LIBS="$old_LIBS -lsnmp"
7914 cat > conftest.$ac_ext <<EOF
7915 #line 7916 "configure"
7916 #include "confdefs.h"
7917 extern char snmp_build_var_op();
7922 if { (eval echo configure:7923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7926 echo "configure: failed program was:" >&5
7927 cat conftest.$ac_ext >&5
7933 if test "x$SNMP_LIBS" = "x"; then
7934 for try in /usr/lib /usr/local/lib /usr/local/snmp/lib $snmp_lib_dir; do
7935 LIBS="$old_LIBS -L$try -lsnmp"
7936 cat > conftest.$ac_ext <<EOF
7937 #line 7938 "configure"
7938 #include "confdefs.h"
7939 extern char snmp_build_var_op();
7944 if { (eval echo configure:7945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7946 SNMP_LIBS="-L$try -lsnmp"
7948 echo "configure: failed program was:" >&5
7949 cat conftest.$ac_ext >&5
7954 if test "x$SNMP_LIBS" != "x"; then
7957 LIBS="$old_LIBS -L$try -lsnmp -lcrypto"
7958 cat > conftest.$ac_ext <<EOF
7959 #line 7960 "configure"
7960 #include "confdefs.h"
7961 extern char snmp_build_var_op();
7966 if { (eval echo configure:7967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
7968 SNMP_LIBS="-L$try -lsnmp -lcrypto"
7970 echo "configure: failed program was:" >&5
7971 cat conftest.$ac_ext >&5
7976 if test "x$SNMP_LIBS" != "x"; then
7983 CFLAGS="$old_CFLAGS"
7984 if test "x$SNMP_LIBS" = "x"; then
7985 echo "$ac_t""no" 1>&6
7988 echo "$ac_t""yes" 1>&6
7989 cat >> confdefs.h <<\EOF
7993 cat >> confdefs.h <<\EOF
7994 #define HAVE_LIBSNMP 1
8002 gethostbyaddrrstyle=""
8003 echo $ac_n "checking gethostbyaddr_r() syntax""... $ac_c" 1>&6
8004 echo "configure:8005: checking gethostbyaddr_r() syntax" >&5
8005 cat > conftest.$ac_ext <<EOF
8006 #line 8007 "configure"
8007 #include "confdefs.h"
8010 gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL, NULL)
8013 if { (eval echo configure:8014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8016 cat >> confdefs.h <<\EOF
8017 #define GETHOSTBYADDRRSTYLE GNUSTYLE
8020 gethostbyaddrrstyle=GNU
8023 echo "configure: failed program was:" >&5
8024 cat conftest.$ac_ext >&5
8027 if test "x$gethostbyaddrrstyle" = "x"; then
8028 cat > conftest.$ac_ext <<EOF
8029 #line 8030 "configure"
8030 #include "confdefs.h"
8033 gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL)
8036 if { (eval echo configure:8037: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8039 cat >> confdefs.h <<\EOF
8040 #define GETHOSTBYADDRRSTYLE SYSVSTYLE
8043 gethostbyaddrrstyle=SYSV
8046 echo "configure: failed program was:" >&5
8047 cat conftest.$ac_ext >&5
8051 if test "x$gethostbyaddrrstyle" = "x"; then
8052 cat > conftest.$ac_ext <<EOF
8053 #line 8054 "configure"
8054 #include "confdefs.h"
8057 gethostbyaddr(NULL, 0, 0)
8060 if { (eval echo configure:8061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8063 cat >> confdefs.h <<\EOF
8064 #define GETHOSTBYADDRRSTYLE BSDSTYLE
8067 gethostbyaddrrstyle=BSD
8068 echo "configure: warning: ****** BSD Style gethostbyaddr might NOT be thread-safe! ****** " 1>&2
8071 echo "configure: failed program was:" >&5
8072 cat conftest.$ac_ext >&5
8077 if test "x$gethostbyaddrrstyle" = "x"; then
8078 echo "$ac_t""none! It must not exist, here." 1>&6
8080 echo "$ac_t""${gethostbyaddrrstyle}-style" 1>&6
8083 gethostbynamerstyle=""
8084 echo $ac_n "checking gethostbyname_r() syntax""... $ac_c" 1>&6
8085 echo "configure:8086: checking gethostbyname_r() syntax" >&5
8086 cat > conftest.$ac_ext <<EOF
8087 #line 8088 "configure"
8088 #include "confdefs.h"
8091 gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL)
8094 if { (eval echo configure:8095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8097 cat >> confdefs.h <<\EOF
8098 #define GETHOSTBYNAMERSTYLE GNUSTYLE
8101 gethostbynamerstyle=GNU
8104 echo "configure: failed program was:" >&5
8105 cat conftest.$ac_ext >&5
8108 if test "x$gethostbynamerstyle" = "x"; then
8109 cat > conftest.$ac_ext <<EOF
8110 #line 8111 "configure"
8111 #include "confdefs.h"
8114 gethostbyname_r(NULL, NULL, NULL, 0, NULL)
8117 if { (eval echo configure:8118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8120 cat >> confdefs.h <<\EOF
8121 #define GETHOSTBYNAMERSTYLE SYSVSTYLE
8124 gethostbynamerstyle=SYSV
8127 echo "configure: failed program was:" >&5
8128 cat conftest.$ac_ext >&5
8132 if test "x$gethostbynamerstyle" = "x"; then
8133 cat > conftest.$ac_ext <<EOF
8134 #line 8135 "configure"
8135 #include "confdefs.h"
8141 if { (eval echo configure:8142: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
8144 cat >> confdefs.h <<\EOF
8145 #define GETHOSTBYNAMERSTYLE BSDSTYLE
8148 gethostbynamerstyle=BSD
8149 echo "configure: warning: ****** BSD Style gethostbyname might NOT be thread-safe! ****** " 1>&2
8152 echo "configure: failed program was:" >&5
8153 cat conftest.$ac_ext >&5
8158 if test "x$gethostbynamerstyle" = "x"; then
8159 echo "$ac_t""none! It must not exist, here." 1>&6
8161 echo "$ac_t""${gethostbynamerstyle}-style" 1>&6
8164 if test x"$rad_enable_largefiles" = xyes ; then
8165 echo $ac_n "checking for largefile linkage""... $ac_c" 1>&6
8166 echo "configure:8167: checking for largefile linkage" >&5
8169 echo "$ac_t""no" 1>&6
8170 { echo "configure: error: AIX before 4.2 does not support large files" 1>&2; exit 1; }
8173 echo "$ac_t""ok" 1>&6
8174 LFS_CFLAGS="-D_LARGE_FILES"
8179 echo "$ac_t""ok" 1>&6
8180 LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
8185 echo "$ac_t""no" 1>&6
8186 { echo "configure: error: Large files not supported on this platform" 1>&2; exit 1; }
8189 echo "$ac_t""maybe" 1>&6
8190 LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
8193 cat >> confdefs.h <<\EOF
8194 #define _GNU_SOURCE 1
8199 echo "$ac_t""ok" 1>&6
8200 # Extract the first word of "getconf", so it can be a program name with args.
8201 set dummy getconf; ac_word=$2
8202 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
8203 echo "configure:8204: checking for $ac_word" >&5
8204 if eval "test \"`echo '$''{'ac_cv_path_GETCONF'+set}'`\" = set"; then
8205 echo $ac_n "(cached) $ac_c" 1>&6
8209 ac_cv_path_GETCONF="$GETCONF" # Let the user override the test with a path.
8212 ac_cv_path_GETCONF="$GETCONF" # Let the user override the test with a dos path.
8215 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
8217 for ac_dir in $ac_dummy; do
8218 test -z "$ac_dir" && ac_dir=.
8219 if test -f $ac_dir/$ac_word; then
8220 ac_cv_path_GETCONF="$ac_dir/$ac_word"
8228 GETCONF="$ac_cv_path_GETCONF"
8229 if test -n "$GETCONF"; then
8230 echo "$ac_t""$GETCONF" 1>&6
8232 echo "$ac_t""no" 1>&6
8235 if test -z "$GETCONF" ; then
8236 { echo "configure: error: getconf required to configure large file support" 1>&2; exit 1; }
8238 LFS_CFLAGS=`$GETCONF LFS_CFLAGS`
8239 LFS_LDFLAGS=`$GETCONF LFS_LDFLAGS`
8240 LFS_LIBS=`$GETCONF LFS_LIBS`
8243 echo "$ac_t""maybe" 1>&6
8244 LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
8257 echo "$ac_t""top_builddir=$top_builddir" 1>&6
8262 if test "x$INCLTDL" != "x";then
8263 INCLTDL='-I${top_builddir}/''libltdl'
8269 if test "x$EXPERIMENTAL" = "xyes"; then
8270 bar=`ls -1 src/modules/rlm_*/configure | sed 's%/configure%%'`
8271 mysubdirs=`echo $bar`
8273 for bar in `cat src/modules/stable`; do
8274 if test -f src/modules/$bar/configure; then
8275 mysubdirs="$mysubdirs src/modules/$bar"
8281 if test "x$EXPERIMENTAL" = "xyes"; then
8282 for foo in `ls -1 src/modules | grep rlm_`; do
8283 MODULES="$MODULES $foo"
8286 for foo in `cat src/modules/stable`; do
8287 MODULES="$MODULES $foo"
8291 subdirs="'libltdl' $mysubdirs"
8299 USE_SHARED_LIBS=$enable_shared
8301 USE_STATIC_LIBS=$enable_static
8310 cat > confcache <<\EOF
8311 # This file is a shell script that caches the results of configure
8312 # tests run on this system so they can be shared between configure
8313 # scripts and configure runs. It is not useful on other systems.
8314 # If it contains results you don't want to keep, you may remove or edit it.
8316 # By default, configure uses ./config.cache as the cache file,
8317 # creating it if it does not exist already. You can give configure
8318 # the --cache-file=FILE option to use a different cache file; that is
8319 # what configure does when it calls configure scripts in
8320 # subdirectories, so they share the cache.
8321 # Giving --cache-file=/dev/null disables caching, for debugging configure.
8322 # config.status only pays attention to the cache file if you give it the
8323 # --recheck option to rerun configure.
8326 # The following way of writing the cache mishandles newlines in values,
8327 # but we know of no workaround that is simple, portable, and efficient.
8328 # So, don't put newlines in cache variables' values.
8329 # Ultrix sh set writes to stderr and can't be redirected directly,
8330 # and sets the high bit in the cache file unless we assign to the vars.
8332 case `(ac_space=' '; set | grep ac_space) 2>&1` in
8334 # `set' does not quote correctly, so add quotes (double-quote substitution
8335 # turns \\\\ into \\, and sed turns \\ into \).
8337 -e "s/'/'\\\\''/g" \
8338 -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
8341 # `set' quotes correctly as required by POSIX, so do not add quotes.
8342 sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
8345 if cmp -s $cache_file confcache; then
8348 if test -w $cache_file; then
8349 echo "updating cache $cache_file"
8350 cat confcache > $cache_file
8352 echo "not updating unwritable cache $cache_file"
8357 trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
8359 test "x$prefix" = xNONE && prefix=$ac_default_prefix
8360 # Let make expand exec_prefix.
8361 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
8363 # Any assignment to VPATH causes Sun make to only execute
8364 # the first set of double-colon rules, so remove it if not needed.
8365 # If there is a colon in the path, we need to keep it.
8366 if test "x$srcdir" = x.; then
8367 ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
8370 trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
8372 DEFS=-DHAVE_CONFIG_H
8374 # Without the "./", some shells look in PATH for config.status.
8375 : ${CONFIG_STATUS=./config.status}
8377 echo creating $CONFIG_STATUS
8378 rm -f $CONFIG_STATUS
8379 cat > $CONFIG_STATUS <<EOF
8381 # Generated automatically by configure.
8382 # Run this file to recreate the current configuration.
8383 # This directory was configured as follows,
8384 # on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
8386 # $0 $ac_configure_args
8388 # Compiler output produced by configure, useful for debugging
8389 # configure, is in ./config.log if it exists.
8391 ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
8394 case "\$ac_option" in
8395 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
8396 echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
8397 exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
8398 -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
8399 echo "$CONFIG_STATUS generated by autoconf version 2.13"
8401 -help | --help | --hel | --he | --h)
8402 echo "\$ac_cs_usage"; exit 0 ;;
8403 *) echo "\$ac_cs_usage"; exit 1 ;;
8407 ac_given_srcdir=$srcdir
8409 trap 'rm -fr `echo "\
8411 ./src/include/build-radpaths-h \
8412 ./src/main/Makefile \
8413 ./src/main/checkrad.pl \
8414 ./src/main/radlast \
8415 ./src/main/radtest \
8416 ./scripts/rc.radiusd \
8417 ./scripts/radwatch \
8418 ./scripts/check-radiusd-config \
8419 ./scripts/radiusd.cron.daily \
8420 ./scripts/radiusd.cron.monthly \
8421 ./scripts/cryptpasswd \
8422 ./raddb/dictionary \
8423 ./raddb/radiusd.conf
8424 src/include/autoconf.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
8426 cat >> $CONFIG_STATUS <<EOF
8428 # Protect against being on the right side of a sed subst in config.status.
8429 sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
8430 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
8434 s%@CFLAGS@%$CFLAGS%g
8435 s%@CPPFLAGS@%$CPPFLAGS%g
8436 s%@CXXFLAGS@%$CXXFLAGS%g
8437 s%@FFLAGS@%$FFLAGS%g
8439 s%@LDFLAGS@%$LDFLAGS%g
8441 s%@exec_prefix@%$exec_prefix%g
8442 s%@prefix@%$prefix%g
8443 s%@program_transform_name@%$program_transform_name%g
8444 s%@bindir@%$bindir%g
8445 s%@sbindir@%$sbindir%g
8446 s%@libexecdir@%$libexecdir%g
8447 s%@datadir@%$datadir%g
8448 s%@sysconfdir@%$sysconfdir%g
8449 s%@sharedstatedir@%$sharedstatedir%g
8450 s%@localstatedir@%$localstatedir%g
8451 s%@libdir@%$libdir%g
8452 s%@includedir@%$includedir%g
8453 s%@oldincludedir@%$oldincludedir%g
8454 s%@infodir@%$infodir%g
8455 s%@mandir@%$mandir%g
8458 s%@RANLIB@%$RANLIB%g
8461 s%@subdirs@%$subdirs%g
8462 s%@LIBLTDLPATH@%$LIBLTDLPATH%g
8463 s%@LIBTOOL@%$LIBTOOL%g
8465 s%@host_alias@%$host_alias%g
8466 s%@host_cpu@%$host_cpu%g
8467 s%@host_vendor@%$host_vendor%g
8468 s%@host_os@%$host_os%g
8470 s%@build_alias@%$build_alias%g
8471 s%@build_cpu@%$build_cpu%g
8472 s%@build_vendor@%$build_vendor%g
8473 s%@build_os@%$build_os%g
8475 s%@OBJEXT@%$OBJEXT%g
8476 s%@EXEEXT@%$EXEEXT%g
8479 s%@logdir@%$logdir%g
8480 s%@radacctdir@%$radacctdir%g
8481 s%@raddbdir@%$raddbdir%g
8483 s%@SNMPGET@%$SNMPGET%g
8484 s%@SNMPWALK@%$SNMPWALK%g
8485 s%@RUSERS@%$RUSERS%g
8486 s%@ACLOCAL@%$ACLOCAL%g
8487 s%@AUTOCONF@%$AUTOCONF%g
8488 s%@AUTOHEADER@%$AUTOHEADER%g
8489 s%@LOCATE@%$LOCATE%g
8490 s%@DIRNAME@%$DIRNAME%g
8493 s%@REGEX_EXTENDED@%$REGEX_EXTENDED%g
8494 s%@LIBPREFIX@%$LIBPREFIX%g
8495 s%@CRYPTLIB@%$CRYPTLIB%g
8496 s%@SNMP_LIBS@%$SNMP_LIBS%g
8497 s%@SNMP_INCLUDE@%$SNMP_INCLUDE%g
8498 s%@GETCONF@%$GETCONF%g
8499 s%@LFS_CFLAGS@%$LFS_CFLAGS%g
8500 s%@LFS_LDFLAGS@%$LFS_LDFLAGS%g
8501 s%@LFS_LIBS@%$LFS_LIBS%g
8502 s%@top_builddir@%$top_builddir%g
8503 s%@LIBLTDL@%$LIBLTDL%g
8504 s%@INCLTDL@%$INCLTDL%g
8505 s%@MODULES@%$MODULES%g
8506 s%@INSTALLSTRIP@%$INSTALLSTRIP%g
8507 s%@USE_SHARED_LIBS@%$USE_SHARED_LIBS%g
8508 s%@USE_STATIC_LIBS@%$USE_STATIC_LIBS%g
8509 s%@STATIC_MODULES@%$STATIC_MODULES%g
8510 s%@RADIUSD_MAJOR_VERSION@%$RADIUSD_MAJOR_VERSION%g
8511 s%@RADIUSD_MINOR_VERSION@%$RADIUSD_MINOR_VERSION%g
8512 s%@RADIUSD_VERSION@%$RADIUSD_VERSION%g
8517 cat >> $CONFIG_STATUS <<\EOF
8519 # Split the substitutions into bite-sized pieces for seds with
8520 # small command number limits, like on Digital OSF/1 and HP-UX.
8521 ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
8522 ac_file=1 # Number of current file.
8523 ac_beg=1 # First line for current file.
8524 ac_end=$ac_max_sed_cmds # Line after last line for current file.
8527 while $ac_more_lines; do
8528 if test $ac_beg -gt 1; then
8529 sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
8531 sed "${ac_end}q" conftest.subs > conftest.s$ac_file
8533 if test ! -s conftest.s$ac_file; then
8535 rm -f conftest.s$ac_file
8537 if test -z "$ac_sed_cmds"; then
8538 ac_sed_cmds="sed -f conftest.s$ac_file"
8540 ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
8542 ac_file=`expr $ac_file + 1`
8544 ac_end=`expr $ac_end + $ac_max_sed_cmds`
8547 if test -z "$ac_sed_cmds"; then
8552 cat >> $CONFIG_STATUS <<EOF
8554 CONFIG_FILES=\${CONFIG_FILES-"\
8556 ./src/include/build-radpaths-h \
8557 ./src/main/Makefile \
8558 ./src/main/checkrad.pl \
8559 ./src/main/radlast \
8560 ./src/main/radtest \
8561 ./scripts/rc.radiusd \
8562 ./scripts/radwatch \
8563 ./scripts/check-radiusd-config \
8564 ./scripts/radiusd.cron.daily \
8565 ./scripts/radiusd.cron.monthly \
8566 ./scripts/cryptpasswd \
8567 ./raddb/dictionary \
8568 ./raddb/radiusd.conf
8571 cat >> $CONFIG_STATUS <<\EOF
8572 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
8573 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
8575 *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
8576 ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
8577 *) ac_file_in="${ac_file}.in" ;;
8580 # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
8582 # Remove last slash and all that follows it. Not all systems have dirname.
8583 ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
8584 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
8585 # The file is in a subdirectory.
8586 test ! -d "$ac_dir" && mkdir "$ac_dir"
8587 ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
8588 # A "../" for each directory in $ac_dir_suffix.
8589 ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
8591 ac_dir_suffix= ac_dots=
8594 case "$ac_given_srcdir" in
8596 if test -z "$ac_dots"; then top_srcdir=.
8597 else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
8598 /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
8600 srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
8601 top_srcdir="$ac_dots$ac_given_srcdir" ;;
8605 echo creating "$ac_file"
8607 configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
8609 *Makefile*) ac_comsub="1i\\
8610 # $configure_input" ;;
8614 ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
8616 s%@configure_input@%$configure_input%g
8617 s%@srcdir@%$srcdir%g
8618 s%@top_srcdir@%$top_srcdir%g
8619 " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
8623 # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
8624 # NAME is the cpp macro being defined and VALUE is the value it is being given.
8626 # ac_d sets the value in "#define NAME VALUE" lines.
8627 ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
8628 ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
8631 # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
8632 ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
8633 ac_uB='\([ ]\)%\1#\2define\3'
8636 # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
8637 ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
8638 ac_eB='$%\1#\2define\3'
8642 if test "${CONFIG_HEADERS+set}" != set; then
8644 cat >> $CONFIG_STATUS <<EOF
8645 CONFIG_HEADERS="src/include/autoconf.h"
8647 cat >> $CONFIG_STATUS <<\EOF
8649 for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
8650 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
8652 *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
8653 ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
8654 *) ac_file_in="${ac_file}.in" ;;
8657 echo creating $ac_file
8659 rm -f conftest.frag conftest.in conftest.out
8660 ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
8661 cat $ac_file_inputs > conftest.in
8665 # Transform confdefs.h into a sed script conftest.vals that substitutes
8666 # the proper values into config.h.in to produce config.h. And first:
8667 # Protect against being on the right side of a sed subst in config.status.
8668 # Protect against being in an unquoted here document in config.status.
8670 cat > conftest.hdr <<\EOF
8673 s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
8677 sed -n -f conftest.hdr confdefs.h > conftest.vals
8680 # This sed command replaces #undef with comments. This is necessary, for
8681 # example, in the case of _POSIX_SOURCE, which is predefined and required
8682 # on some systems where configure will not decide to define it.
8683 cat >> conftest.vals <<\EOF
8684 s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
8687 # Break up conftest.vals because some shells have a limit on
8688 # the size of here documents, and old seds have small limits too.
8693 ac_lines=`grep -c . conftest.vals`
8694 # grep -c gives empty output for an empty file on some AIX systems.
8695 if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
8696 # Write a limited-size here document to conftest.frag.
8697 echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
8698 sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
8700 sed -f conftest.frag conftest.in > conftest.out
8702 mv conftest.out conftest.in
8704 sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
8706 mv conftest.tail conftest.vals
8710 cat >> $CONFIG_STATUS <<\EOF
8711 rm -f conftest.frag conftest.h
8712 echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
8713 cat conftest.in >> conftest.h
8715 if cmp -s $ac_file conftest.h 2>/dev/null; then
8716 echo "$ac_file is unchanged"
8719 # Remove last slash and all that follows it. Not all systems have dirname.
8720 ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
8721 if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
8722 # The file is in a subdirectory.
8723 test ! -d "$ac_dir" && mkdir "$ac_dir"
8726 mv conftest.h $ac_file
8731 cat >> $CONFIG_STATUS <<EOF
8734 cat >> $CONFIG_STATUS <<\EOF
8738 chmod +x $CONFIG_STATUS
8739 rm -fr confdefs* $ac_clean_files
8740 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
8742 if test "$no_recursion" != yes; then
8744 # Remove --cache-file and --srcdir arguments so they do not pile up.
8745 ac_sub_configure_args=
8747 for ac_arg in $ac_configure_args; do
8748 if test -n "$ac_prev"; then
8753 -cache-file | --cache-file | --cache-fil | --cache-fi \
8754 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
8755 ac_prev=cache_file ;;
8756 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
8757 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
8759 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
8761 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
8763 *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
8767 for ac_config_dir in 'libltdl' $mysubdirs; do
8769 # Do not complain, so a configure script can configure whichever
8770 # parts of a large source tree are present.
8771 if test ! -d $srcdir/$ac_config_dir; then
8775 echo configuring in $ac_config_dir
8780 if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
8782 { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
8790 # A "../" for each directory in /$ac_config_dir.
8791 ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
8794 .) # No --srcdir option. We are building in place.
8795 ac_sub_srcdir=$srcdir ;;
8796 /*) # Absolute path.
8797 ac_sub_srcdir=$srcdir/$ac_config_dir ;;
8799 ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
8802 # Check for guested configure; otherwise get Cygnus style configure.
8803 if test -f $ac_sub_srcdir/configure; then
8804 ac_sub_configure=$ac_sub_srcdir/configure
8805 elif test -f $ac_sub_srcdir/configure.in; then
8806 ac_sub_configure=$ac_configure
8808 echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
8812 # The recursion is here.
8813 if test -n "$ac_sub_configure"; then
8815 # Make the cache file name correct relative to the subdirectory.
8816 case "$cache_file" in
8817 /*) ac_sub_cache_file=$cache_file ;;
8819 ac_sub_cache_file="$ac_dots$cache_file" ;;
8822 echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
8823 # The eval makes quoting arguments work.
8824 if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
8827 { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
8841 echo timestamp > src/include/stamp-h
8842 (cd ./src/include && /bin/sh ./build-radpaths-h)
8843 (cd ./src/main && chmod +x checkrad.pl radlast radtest)
8844 (cd ./scripts && chmod +x rc.radiusd radwatch check-radiusd-config radiusd.cron.daily radiusd.cron.monthly cryptpasswd)
8846 cat >> src/include/autoconf.h <<EOF
8848 #define HOSTINFO "$host"
8849 #define RADIUSD_VERSION "$RADIUSD_VERSION"