1 FreeRADIUS 3.0.10 Wed 08 Jul 2015 12:00:00 EDT urgency=medium
3 * Do more optimization of unlang policies. This makes
5 * Re-name most of the functions in src/lib. Third-party
6 module authors will have to do the same.
7 * More documentation on contributing and how to write
9 * Update radiusd.service for systemd.
10 * Open IPv6 proxy socket if the server is listening on IPV6
11 auth / acct / coa packets.
12 * Create debian packages for DHCP. Fixes #1125.
13 * Add more tests for "update" section parsing.
15 * Update attributes for Alcatel 7750
16 * Add dictionary for Boingo Wi-Fi
17 * Add support for DHCP lease queries.
18 See raddb/sites-available/dhcp
19 * On HUP, check all modules for config files which have
20 changed. And only re-load those modules.
21 * Allow FreeRADIUS-Response-Delay(-USec) to be set for
22 RADIUS packets. Patch from Herwin Weststrate.
23 * Documentation fixes from Alan Buxey and Matthew Newton.
24 * Update "logrotate" script.
25 * Added more RFCs to doc/rfc for new standards implemented
27 * Don't crash when doing "radmin -e "help hup".
28 Patch from Matthew Newton.
29 * The dictionary parser now does more sanity checks, which
30 prevents run-time problems with invalid attributes.
31 * Update debian packages. Patches from Christopher Hoskin.
32 * Add "session-state" to Perl. Patch from Herwin Weststrate.
35 * Fix rlm_files so that there are no collisions when loading
36 10's of 1000's of users.
37 * Fix radclient to use our internal v4/v6 parsing functions.
38 v6 addresses with ports now work correctly.
39 * Fix sending/receiving packet messages to wrap v6 addresses
40 in square brackets '[]'.
41 * Check for sasl/sasl.h when building rlm_ldap, and disable
42 SASL functionality if unavailable.
43 * Fix issue which caused a non \0 terminated buffer to be
44 assigned to attributes if the value being assigned contained
45 an invalid escape sequence.
46 * Fix deadlock when reconnecting connections in the connection
48 * Fix potential overrun in functions that used fr_utf8_char
49 with a non nul terminated buffer.
50 * Fix decoding issue for Tunnel-Password type attributes
51 which were very long. Found by Denis Andzakovic.
52 * Fix radclient issue with TCP sockets on FreeBSD.
53 * The server now creates ${run_dir} and ${logdir} directories
54 in daemon mode, when running as "root".
55 * Handle tags when using maps. Fixes #1191.
56 * Fix crash when CoA packets time out.
57 * Fix parse error in rediswho
58 * Fix regex support in SQL radcheck the "users" file and radsniff.
59 * Register listen xlat earlier, so that it's available when the
60 virtual servers are being parsed.
61 * Parse Ascend-Data-Filter when given as "0x..."
62 * Print Ascend-Data-Filter correctly. Add test cases for both.
63 * Allow old-style clients again. They will be disallowed for
65 * Complain instead of crash when "else" and "elsif" are in
67 * Clean up memory more aggressively. This lowers the
68 maximum memory used, most typically for TLS based EAP methods.
69 * Prevent the server from unlinking the control socket of an
70 already running instance.
71 * Fallback to using the configured OCSP URL if one exists, and
72 no URL is provided in the certificate.
73 * Return CoA-NAK if proxying CoA fails. Based on patch from
75 * Lower peak memory usage by decreasing size of internal
77 * The control socket is now left in place if a second copy
78 of the server is accidentally started.
79 * Allow virtual attributes in "switch", "case", etc.
80 Fixes #1240 and #1265.
81 * Many spell check / typo fixes in comments and example
83 * Better handle multiple DHCP listeners.
84 * Don't print secrets for old-style realms. Fixes #1267.
85 * Don't fall through in empty "case" statements.
87 * Update EAP-TTLS so that MPPE keys are correctly calculated with TLSv1.2.
88 * Always delete MS-MPPE-* from the TTLS inner tunnel. This allows
89 TTLS / EAP-MSCHAPv2 to work. Fixes #1206.
91 FreeRADIUS 3.0.9 Wed 08 Jul 2015 12:00:00 EDT urgency=medium
93 * Make "pool" configurations more consistent, and
94 update documentation for them.
95 * Move connection pool logic to "most recently started",
96 instead of MRU. This should help with pool stability.
98 * Added examples of multi-value attributes to rlm_perl.
99 * LDAP-Group and SQL-Group attributes are now dynamically
101 * Only the "sql" module registers SQL-Group. Other instances
102 register "instance-name-SQL-Group", similarly to "ldap".
103 * Unknown attributes are now complained about more often
104 when used in unlang statements. e.g. if (Foo-Bar == 3)
105 used to be a string to string comparison. It is now a
107 * Rename RLM_COMPONENT_* to MOD_* in the code.
108 This makes many things easier.
109 * Move to C99 initializers for modules.
110 * Load modules in raddb/mods-enabled. This allows attributes
111 like "LDAP-Group" to be used in the "files" module,
112 without explicit ordering or listing in "instantiate".
113 * Added 'bootstrap' section to modules. Third-party modules
114 will need to be updated.
115 * When adding clients from a DB, add them to a virtual server
116 if that virtual server has a "listen" section. Otherwise,
117 add the clients to the global list.
118 * When reading dynamic clients from a file, don't expire them
119 if the underlying file is unchanged.
120 * Allow the server to originate CoA requests from the post-auth
122 * The server creates ${run_dir} and ${logdir} in daemon mode,
123 if they do not already exist.
124 * Add dictionary for Wi-Fi Alliance Hotspot 2.0. The server
125 now supports all mandatory and optional attributes for this
127 * HUP now re-loads the configuration only if the files have
128 changed. If all files are unchanged, HUP re-opens the
129 log file, and does nothing else.
130 * Much better debug messages for EAP-TLS, including which
131 attributes are cached, and when they are retrieved.
132 * Increase default max_requests to 16384. Memory is cheap now.
133 * Added "stats memory" commands to radmin. Debug build only.
134 * Aptilo controller dictionary updates.
135 * SQL modules now use Acct-Unique-Session-Id everywhere.
136 * The redis modules are now stable.
137 * The LDAP module now supports SASL "interactive bind" method.
138 This allows Kerberos based administrator and user binds.
139 * DHCP code is now in libfreeradius-dhcp.
140 * More DHCP encoding / decoding unit tests.
141 * rlm_replicate can now be listed in the "accounting" section.
142 * Better sqlite debugging output.
143 * Remove "required" option from many sql_ippool directives.
144 * Set default CA "basic constraints" to "critical". Fixes #1073
145 * Updates to help / man pages from Jorge Pereira.
149 * Be more careful about unused config item warnings
151 * Move more defines to be auto-generated.
152 * Allow virtual servers in proxy fallback.
153 * Allow %{module:} to work.
154 * Don't crash in RadSec. Closes #980.
155 * Return better errors when a unix group / user
157 * Re-enable detail module "locking" parameter.
158 * Don't crash when logging replies from Status-Server packets.
159 * The couchbase module now uses "update" instead of "map",
160 for consistent with the rest of the server. See
161 raddb/mods-available/couchbase
162 * Don't require NT-Password for MS-CHAP password changes.
163 * Be a bit more careful about decrypting MS-CHAP-MPPE-Key
164 attributes. Closes #1013. There is no perfect fix, tho.
165 * Fix security issues with EAP-PWD.
166 See http://freeradius.org/security.html#eap-pwd-2015
167 * Fix dynamic clients read from SQL in non-debug mode
168 * MS-CHAP now allows retries (i.e. password change) when
169 passwords are expired.
170 * Allow "user=radiusd" when the server is already user
172 * suid up/down works on non-Linux systems. This means
173 that the control socket should have the correct
175 * Fix issue which caused the server to sometimes have problems
176 when a home server was marked zombie.
177 * Fix format.pl because Perl is now more picky.
178 * Fix proxy to Packet-Dst-IP-Address, so that it uses the
179 correct destination port.
180 * Fix corner case with cursor functions and removal.
181 * OpenDirectory fixes and documentation.
182 * Fix leaks in rlm_redis.
183 * RFC 6929 "evs" attributes are now encoded / decoded
185 * Fix talloc pool leaks when receiving malformed or
186 retransmitted Accounting/CoA requests.
187 * Printed attributes again use double quotes instead of
189 * Set X509_V_FLAG_CRL_CHECK_ALL, and add "check_all_crl"
190 to eap.conf. Fixes oCert CVE-2015-4680.
191 * rlm_expr now errors out correctly on malformed attribute
192 references instead of triggering an assert.
193 * Make "break" work in "foreach" loops
194 * Allow dynamic expansions to work again in the "hints" file.
195 * Correct minor typos in comments and examples from Alan Buxy.
196 * Re-urlencode the path portion of ldapi:// urls before
197 passing it to ldap_initialise.
199 FreeRADIUS 3.0.8 Wed 22 Apr 2015 13:30:00 EDT urgency=medium
201 * Allow syslog_severity to be set in rlm_linelog.
202 * Allow defaults to be set for bulk clients in LDAP and couchbase.
203 * Updates to dhcpclient. Patches from Nicolas C.
204 * rlm_mschap now supports direct connections to winbind, which
205 is faster than ntlm_auth. See raddb/mods-available/mschap.
206 Patch from Matthew Newton.
207 * Recommend /dev/urandom for TLS randomness, instead of
209 * Allow TLSv1 to be disabled via "disable_tlsv1" in tls{}.
210 * Allow Expanded EAP types where vendor is 0 (IETF) and
211 type is normal EAP type. Supplicants sending Expanded
212 EAP types like this are broken.
213 * Add support for server side sort controls when searching for
214 user objects in rlm_ldap.
217 * Don't complain about "authorize" in "server {}" blocks, but
218 only if there's no "server" block.
219 * Fix cosmetic issue where debug from the first packet read by
220 a detail reader thread would be emited during config parsing.
221 * Fix ASSERT on truncated detail packets.
222 * Don't use main server log functions from within panic_action,
223 as in the case of syslog this would cause deadlocks if the
224 fault was triggered from within a malloc.
225 * Fix issue in "switch" when "correct_escapes = false".
227 * Fix sqlcounter configuration to use "%%b" instead of "%b",
228 otherwise the new syntax validation will fail.
229 * Allow forward references in configuration items. Modules
230 aren't always loaded in a sane order.
231 * Fix more escaping issues. Closes #912.
232 * Decode MAC addresses correctly for VMPS.
233 * Fix memory leak with TLS connections.
234 * Fix state machine threading issues for conflicting packets.
235 * Fix copy_request_to_tunnel issues for tagged attributes.
236 * Allow "ok" to over-ride "updated" inside of Auth-Type sections.
237 * Update state machine so that post-proxy is run though child
238 threads for performance, instead of blocking the main thread.
239 * Allow "netmask" to work again in client definitions.
240 * Relax restrictions on SQL group queries.
241 * track outgoing proxy sockets and clean them up more aggressively.
242 * track proxy statistics, including CoA and Disconnect.
243 * If radmin has a connection failure when running a command,
244 it re-connects and runs the command again.
245 * mark home servers "unknown" less aggressively.
246 * Fix potential SEGV in PostgreSQL driver on error.
247 * Fix issue where fields like nas_type would not be accessible via
248 the %{client:} xlat, for dynamic clients.
249 * Set default busy_timeout (of 200ms) in the sqlite driver, so writes
250 don't cause selects to fail in multithreaded mode. This is user
251 configurable, and may be increased if required.
252 * Convert Password-With-Header attributes to binary (from hex or
253 base64), in the authorize method of rlm_pap.
254 * Fix invalid assert in state.c, that could cause abort in
256 * Fix double free when -m flag is used, and connection pools are
257 referenced by multiple modules.
258 * RADIUS over TLS accounting uses the same port as authentication.
259 * Regularized return codes from radmin commands.
260 * Fix RHEL spec file so it works correctly for Centos7 which uses
261 systemd, and didn't like the SystemV init script.
262 * radwho and radlast now have a -D option to load dictionaries
263 * DHCP packets are no longer checked for duplicates.
264 * Don't crash in sql module group comparisons in corner case.
265 * Calculate MPPE keys correctly when using TLS 1.2.
266 * Fix load-balance sections. Closes #945
267 * TLS certificates are available again in the post-auth section.
268 They are not available for session resumption.
269 * radclient encodes CHAP-Password properly when using -c.
271 * Fix issue in rlm_cache_memcached driver that caused variable
272 length values to be truncated.
273 * Fix track functionality in detail reader, so it no longer
274 fails with a "Failed marking detail request as done: Bad file
276 * Actually add the peer identity (as User-Name) to the inner
277 tunnel in EAP-PWD requests, so it's available for lookups.
278 * Fixes to PostgreSQL queries. Patches from Santiago Gimeno.
280 FreeRADIUS 3.0.7 Thu 19 Feb 2015 12:00:00 EDT urgency=medium
282 * Allow coa home_servers to be derived from client
283 sections if a coa_server section is provided.
284 * Automatically determine the correct port if no port is
285 provided for a home server.
286 * Allow foreach to operate over lists.
287 * Add compile time features to ${feature.*} and versions
288 of core libraries to ${version.*}. Feature and version
289 names match output of radiud -xv. %v is now deprecated.
290 * Add support for PATCH method in rlm_rest.
291 * Validate more module xlats on startup, and warn if an
292 xlat expansion is found in a double quoted config item
293 which will not be expanded.
294 * Add support for sub-second timeouts in rlm_rest.
295 * Add support for connection timeouts in rlm_rest.
296 * Add %{jsonquote:<str>} xlat to escape strings for insertion
298 * Add %{ldapquote:<str>} xlat to escape strings for insertion
300 * Add %{explode:&ref <char>}, splits value of &ref on
301 <char> and creates new &ref type attributes with the
303 * Allow rlm_ldap to use attribute references for base_dn and
304 filter config items. The attribute references are not
305 escaped, allowing DNs and filters to be created dynamically.
306 * Add %{nexttime:[<int>]h|d|w|y} to calculate the number of
307 seconds before the next <int> hour(s), day(s), week(s),
309 * Allow the left side of update sections to be xlat expansions.
310 The result of the expansion is then used to reference the
311 attribute to be modified.
312 * Added %{lpad:&Attribute-Name 7 x} and rpad. These produce
313 fixed-width output strings, with padding to the left (lpad)
315 * For some SQL drivers (MySQL, sqlite) distinguish between
316 constraints violations (on insert), invalid queries, and
317 server errors, and return noop, invalid, and error respectively.
318 * Call SHOW WARNINGS in the MySQL driver and write them to
319 the request log, if libmysqlclient indicates warnings are
320 available on the server.
321 * Forbid the creation of Vendor-Specific for non-standard
322 VSAs. Use Attr-26 = 0x... instead.
323 * Make dhcpclient work with raw sockets and various other
324 improvements - Contributed by nchaigne
325 * Add support for SSHA2 - Contributed by PDD.
326 * Add perle dictionary - Contributed by Hachmer
327 * Modernise init scripts for RHEL, SUSE and Debian.
328 * radmin now tracks the return code of commands, and exits
329 with status "1" if any command failed to execute.
330 * radmin now sends error messages from the server to
331 stderr, instead of to stdout.
332 * radmin now looks for sockets matching it's UID and GID,
333 rather than just always using the first one it finds.
334 * radmin can how delete clients which are tied to a listener.
335 * Moved RADIUS attribute definitions to src/include/rfc*.h
336 * Move to talloc pools for requests. For in-memory tests
337 (default config, 'users' file), performance increases by 30%.
338 * In rlm_ldap allow sasl_mech to be specified for admin and
339 user binds. Only non-interactive mechs (like EXTERNAL)
340 are currently supported.
341 * Remove support for ephemeral RSA keys. They were "export only",
342 and should not be used by anyone.
343 * Syntax errors in the "users" file now produce better
347 * Fix issues parsing LDAP hostnames with non-standard ports.
348 * Fix issues with realms containing regular expressions.
349 * Allow unary negation before parantheses in rlm_expr.
350 * Fix infinite loop in kevent event loop code. Issue only
351 presented on FreeBSD.
352 * Be more careful to define Auth-Types before loading modules.
353 * Link libfreeradius-radius against OpenSSL too, to avoid
354 multi-version symbols in SSL libraries.
355 * When rlm_ldap rebinds a connection, it should use bind
356 credentials from the module that created the connection
357 pool, not credentials from the module referencing it.
358 * Empty server config pairs should be allowed in rlm_ldap
359 instances that reference another module's connection pool.
360 * Mark rlm_always as huppable, so its rcode can be changed
361 via radmin (allows policy toggles).
362 * Emit warnings when ignoring user configured pool values.
363 * Fix issue that would cause radclient to complain
364 intermittently about differing numbers of filters and
366 * Fix cosmetic issues in connection pool logging, that made
367 it appear as if the same connection was being opened
369 * Fix threadsafety issues in SQL drivers, where a static
370 buffer was used to store error messages.
371 * Log RERROR, RWARN, RINFO to the global log if request
372 logging is not enabled.
373 * Link to libldap instead of libldap_r. libldap_r
374 is not supported for use by projects outside of OpenLDAP.
375 * Set connection timeout correctly in rlm_sql_mysql.
376 * Build with older versions of libcurl, and use CFLAGS from
378 * Honour Packet-Src-Port and Packet-Src-IP-address in radclient.
379 * Initialise ldapai_info_version field, so libldap will report
380 its vendor and version.
381 * Fix log rotation scripts by using the copyrotate option.
382 * Fix issue that caused opening control sockets to always
383 fail on non-Linux systems, if a user or group was set.
384 * Save Session-State after proxying.
385 * Additional fixes for reading CoA/DM requests from detail
387 * Create dynamic clients if the dynamic clients virtual server
388 returns ok *or* updated. Emit useful messages for other codes.
389 * Compile bare "authorize" statements, and issue errors saying
390 using them isn't a good idea.
392 FreeRADIUS 3.0.6 Wed 17 Dec 2014 16:00:00 EDT urgency=medium
394 * radmin / raddebug conditional errors are printed
395 to the output, instead of being discarded.
396 * raddebug will exit if condition set with -c was invalid.
397 * radmin auto-reconnects if the connection to the server
399 * rlm_cache now has submodule support. See
400 raddb/mods-available/cache
401 * New memcached driver for rlm_cache. See
402 raddb/mods-available/cache
403 * Add support for &Attribute-Name[*] in conditions.
404 See "man unlang" for details.
405 * Add &Attribute-Name[n] which gets the last instance
406 of an attribute e.g. Module-Failure-Message[n].
407 * Allow for redundant string expansions. See the
408 "instantiate" section of radiusd.conf.
409 * When checking IP addresses in conditions, make the
410 right side be parsed as an IP prefix.
411 * Support JIT compilation of compiled regular expressions
412 when built with libpcre.
413 * Support named capture groups with "%{regex:<name>}"
414 when built with libpcre.
415 * Increase regular expression capture groups from 8 to 32.
416 * Emit error markers for badly formed regular expressions.
417 * Allow 'm' flag to enable multiline mode in regular
419 * Support limited implicit attribute conversion in update
421 * Support casting between IPv6 and IPv4 where the IPv6
422 address has the v4/v6 mapping prefix (::ffff:).
425 * PEAP works again. As does proxying EAP-MSCHAPv2
426 from inside of a PEAP tunnel.
427 * "group" is allowed inside of "instantiate" sections.
428 * update disconnect {} with
429 disconnect:Packet-Dst-IP-Address now works correctly.
430 * Regular expression comparisons of non string attributes
431 are now disallowed in the files module. Previously
432 they would silently fail or produce undefined behaviour.
433 * Fix parsing of old regular expressions. Closes #842
434 * Fix off by one error in ascend filters. Closes #843.
435 * Handle NT-Hash in rlm_pap. This allows passwords to
436 have backslashes in them.
437 * Fix infinite loop on "Fall-Through = yes" when
438 processing SQL groups.
439 * Correct the check of SQL query return code.
440 * Run "Post-Auth-Type Reject" if the request was rejected
442 * Write "Login OK" only if the post-auth section passed.
443 * Create TLS-Cert-* certificates, even when EAP session
445 * Finalize the "correct_escapes" with many more tests.
446 * Move to the new OpenLDAP libldap API, fixes more issues
448 * Fix potential memory corruption in rlm_ldap if start
449 connections were set to 0, and the server was running
450 in threaded mode. The fix is a workaround for an issue
451 in libldap and was suggested by Howard Chu.
452 * Give parse errors on "%{...", without the closing brace.
453 * Allow spaces in certificate passwords for build rules
455 * Make all regular expression evaluation binary safe.
456 Where that's not possible, emit an error if the pattern
457 or subject contains an embedded null byte.
458 * Fix various issues around masking IPv6 addresses.
459 * Give descriptive error if unknown attributes are used
460 in "update" sections.
461 * Deal with cases where ldap_initialize isn't available
462 gracefully, and use it exclusively when it's available.
464 FreeRADIUS 3.0.5 Fri 21 Nov 2014 15:30:00 EDT urgency=medium
466 * Large update to Huawei dictionary.
467 * Added dictionary.rfc7155
468 * Regular expressions like /%{User-Name}/ are now parsed
469 and validated when the server starts.
470 * All configuration items which are dynamically expanded
471 are now parsed and validated when the server starts.
472 * %{expr:...} expressions can now do bit shifting and more.
473 See raddb/mods-available/expr.
474 * The detail file reader can now track packets which have
475 had replies, so they are never re-transmitted. See
476 raddb/sites-available/buffered-sql, the "track" config item.
477 * CoA and Disconnect packets can now be sent to a specific
478 home server by setting control:Packet-Dst-IP-Address and
479 (optionally) control:Packet-Dst-Port.
480 * Allow CoA and Disconnect packets to be read from the
482 * Allow LDAP to specify arbitrary attributes for dynamic
484 * Convert all unused attributes in the control: list to config
485 pairs in dynamic clients. This allows arbitrary client
486 attributes to be set for dynamic clients too.
487 * rlm_couchbase now supports bulk loading of clients on startup
488 in a similar way to rlm_ldap. Contributed by Aaron Hurt.
489 * Allow one level of backslashes (finally). See radiusd.conf,
490 "correct_escapes" setting.
491 * Rename dictionary.redback to dictionary.ericsson.ab
492 * Add --disable-openssl-version-check option to configure.
493 So vendors can disable the check. Patch from
495 * Do context-specific indenting in debug messages. This makes
496 the debug output easier to read.
497 * Make configuration a separate RPM, just like for Debian.
498 * better decoding of unknown VSAs
499 * When supported by OpenSSL, allow TLS 1.1 and TLS 1.2
501 * Allow multiple new connections to be spawned simultaneously
502 in the connection pool, to cope with spikes in traffic.
503 * Document retry_delay in connection pools.
504 * Allow checksimul in rlm_couchbase.
505 * Use kqueue on systems which support it. This allows for
506 better scaling when using many sockets.
509 * Parse list qualifiers in generic LDAP 'valuepair_attribute'
510 attributes correctly.
511 * Fix issue where prefix length would be ignored for dynamic
512 or static clients if the address matched INADDR_ANY
514 * Allow null user object filter in rlm_ldap, it's valid to
515 specify a complete object DN and use the base scope.
516 * Don't SEGV if a received attribute value in a JSON structure
517 is null, or a value can't be stringified.
518 * Don't assert if the server returns a JSON content-type and
519 the server hasn't been built with support for JSON.
521 * Set CURLOPT_NOSIGNAL to prevent curl from handling signals
522 and causing a longjmp error when the server was running with
524 * Allow tabs after attribute names in the "users" file.
526 * Free unknown DICT_ATTRs. Closes #795
527 * Handle unknown attributes in the conditions and "update"
528 sections. e.g. Attr-1.2.3.4 = foo.
529 * Use correct array size for MS-CHAP new password.
530 * In rlm_rest, check for older versions of libraries at start
531 time, rather than when a packet comes in.
532 * Don't call detach on parse error in rlm_perl. Closes #802.
533 * Integer fixes for big-endian systems. Closes #803.
534 * Don't optimize %{Packet-Src-IP-Address}. Closes #804.
535 * dhcpclient loads dictionaries correclty. Closes #805.
536 * double quotes are no longer escaped in single-quoted
537 strings. e.g. 'foo "hello" bar'.
538 * Fixes for proxying to virtual servers broke the detail file
539 reader. Now they both work.
540 * Typos and fixes from Nikolai Kondrashov.
541 * Fixes to OpenSSL version checks, for cross-platform issues.
542 * cppcheck fixes from Herwin Weststrate.
543 * Fix build for OSX Yosemite
544 * Merge DHCP sub-options. Closes #812.
545 * Fix decoding of Starent attributes.
546 * When a module asks for a connection, don't return idle
548 * LDAP connection timeouts will now retry, instead of failing.
549 * Prevent race conditions between fork and wait for child.
550 Patch from James Rouzier.
551 * Fix triggers for connection pools. Patches from
553 * Fix SEGV when comparing non string type check items.
554 * Build with newer versions of libmysqlclient.
555 * make the %{escape:} and %{unescape:} xlat functions UTF8
557 * Don't escape UTF8 chars in SQL query strings.
558 * Fix issue in cached LDAP group comparisons, which caused
559 checks to sometimes fail.
560 * Fix use after free issue in unlang switch evaluation.
561 * Respect operators in rlm_cache when merging into the current
563 * Update Cache-Entry-Hits each time rlm_cache is called.
564 * Produce WARN messages if SQL queries are empty strings.
565 * Fix invalid assertion when proxying CoA requests.
566 * Allow empty strings in "case" statements. Closes #836.
567 * Normalize escaping for string expansions. i.e. don't do
568 double escaping in rare situations.
569 * Normalize LDAP escaping. LDAP servers have multiple ways
570 to escape things, so the data has to be normalized before
571 we can compare two LDAP DNs.
572 * Don't go to high debug level if we're proxying inner EAP
574 * Fix rlm_rest state handling. Closes #835.
576 FreeRADIUS 3.0.4 Wed 10 Sep 2014 12:00:00 EDT urgency=medium
578 * Home server "response_window" can now take fractions of a
579 second. See proxy.conf.
580 * radmin now supports "show module status", as thee counterpart
581 to "set module status"
582 * Added dictionary ericsson.packet.ccore.networks, bluecoat,
583 citrix, compatible, riverbed, ruckus, and RFC 7268.
584 * Add %{tag:} expansion to get the tag value of an attribute.
585 * Report 'application_name' in connections to PostgreSQL servers.
586 FreeRADIUS connections will now appear as
587 'FreeRADIUS <version> - <name>' in pg_stat_activity.
588 * All config item fields are now type checked at compile time
589 to prevent issues similar to #634 occuring again.
590 * Modify pairparsevalue to deal with embedded NULLs better,
591 and use the binary versions of attribute values in rlm_ldap.
592 * "ipaddr" will now use v6 if no v4 address is present. You should
593 use "ipv4addr" or "ipv6addr" to force v4/v6 addresses.
594 * The above applies to "listen", "home_server", and "client" sections.
595 * "client" sections will allow "ipaddr = 192.192.0/24". The old
596 "netmask" is still accepted, but the new format is preferred.
597 * Allow custom HTTP headers to be set for rlm_rest requests using
598 control:REST-HTTP-Header (attributes consumed after use).
599 * Extend format of %{rest:} expansion to allow HTTP method and POST
601 e.g. %{rest:POST http://example.org/api foo=bar&baz=boink}.
602 * Add %{hmacsha1:&data &key} and %{hmacmd5:&data &key} expansions
603 for signing data in requests.
604 * rlm_cache now consumes its control attributes to make runtime
605 configuration easier.
606 * Add control:Cache-Read-Only which when set to 'yes' will make the
607 cache module merge existing cache data, but not create new entries.
608 * Add %{unescape:} and %{urlunquote:} expansions to reverse escaping
610 * Add support for aliases in rlm_ldap.
611 * Add support for connection pool sharing to all modules that use
612 the connection pool (pool = <instance>).
613 * "tls" sections now have a "psk_query" configuration item, for dynamic
614 queries to discover a key from a PSK identity.
615 * Preliminary support for EAP channel bindings.
616 * Foundational work for dynamic home servers. They do not yet work,
617 but this is now only a matter of updating the "realm" module in
619 * Support &attr[*] syntax to copy all instances of an attribute when
620 used with the += operator in an update section. May be qualified with
622 * The logintime and expiration modules can now be listed in the
623 post-auth section. This makes some configurations simpler.
624 * Allow comparison of integer attributes of different sizes,
625 without requiring a cast.
626 * rlm_sqlippool is now IPV6 capable. Set "ipv6 = yes" to get
627 Framed-IPv6-Prefix returned. The SQL queries have NOT been updated.
628 Please submit patches.
629 * The debian build now checks for the OpenSSL package with the heartbleed
630 fix, and if found, sets: allow_vulnerable_openssl = 'CVE-2014-0160'
631 * allow bootstrap from multiple files in sqlite driver.
634 * make case-insensitive regular expressions work again, and add tests
636 * A few more talloc parenting issues
637 * Fix delayed proxy reply handling. Closes #637
638 * Fix OpenSSL initialization order when using
639 RADIUS/TLS. Fixes #646
640 * Don't double-quote strings in debugging messages
641 * Fix foreach / break. Fixes #639
642 * Chargeable-User-Identifier, ADSL-Agent-Circuit-Id and
643 ADSL-Agent-Remote-Id should be "octets" types in the default
645 * Fix typo in mainconfig. Fixes #634
646 * More rlm_perl fixes. Fixes #635
647 * Free OpenSSL memory on clean exit.
648 * Fix <attr>[0] !* ANY - Was removing all instances of <attr>
649 * Fix case where multiple attributes were returned from RHS of
650 mapping, as with rlm_ldap. Fixes #652
651 * Fix corner case in cursor where using fr_cursor_next_by_da
652 after calling fr_cursor_remove may of resulted in a read of
653 uninitialised memory.
654 * Don't SEGV if all connections to a database server go away.
656 * Fix issue where <attr> -= <value> was not removing tagged
657 instances of <attr> equal to <value> (only untagged).
658 * Fix issue where tag values were not being set on attributes
659 created with unlang/ldap update blocks.
660 * Create rlm_sqlcounter attributes as integer64 types instead
661 of integer types, so large counter values can be specified.
662 * Fix issue where specifying a dynamic client IP addresss using
663 FreeRADIUS-Client-IPv6-Prefix or FreeRADIUS-Client-IP-Prefix
664 may have caused a validation error.
665 * Don't print two "&" for messages about attribute or list
666 references in debug output.
667 * Fix urlquote and escape to encode Unicode characters correctly.
668 * Fix redundant-load-balance blocks to try other modules in
669 the group if one fails.
670 * Fix issue with rlm_pap password normalisation where
671 'known good' password strings stored in octets type attributes,
672 would be sometimes misnormalised as base64.
673 * Don't stop processing DHCP options if we find a 0x00 padding
675 * Fix issue where modifying the value of an attribute created
676 from a template with a literal value, may have resulted in the
677 template literal being freed.
678 * Fix parenting issues in tls code which may have resulted in
679 memory corruption and crashes.
680 * Fix issue in radsniff where writing to PCAP files and using
681 -R response filters, where the requests would still be written
682 to the PCAP for non matching responses.
683 * Define __APPLE_USE_RFC_2292 so that the server builds with IPv6
685 * Fix LDAP group lookups for named rlm_ldap instances.
686 Note that attribute references should be used when
687 checking LDAP-Group attributes. e.g. if (&LDAP-Group == 'foo').
688 * Delayed attribute references can now be used in unlang
689 existence checks. i.e. if (&Attribute-Name) { ... }
690 * Fix issues in EAP-PWD. CVE-2014-4731, CVE-2014-4732, and
691 CVE-2014-4733. There is no external authentication bypass.
692 * Fix a number of uses of the talloc parent/child reference.
693 * Release connection used for reading bulk clients in rlm_ldap.
694 * rlm_rest is now fail-safe if it's used without any configuration
695 * Pull in build fixes for FreeBSD from ports.
696 * Fix error in sqlite postauth query
697 * Evaluate argument to "switch" statements once, instead of for each
699 * Define sig_t on systems without it. Closes #765.
700 * Fix boundary issue with rlm_rest. Closes #768
701 * Optimize "%{Attribute-Name}" in comparisons only if the dictionary
703 * Don't do chmod() in rad_mkdir() if the directory already exists.
704 We might not have permission to change it.
705 * Use getpwnam_r() and getgrnam_r() on systems which support it.
707 * Clients loaded from SQL are now tied to the "listen" section
708 of a virtual server, instead of being global.
709 * Check for -lpcre. The system might have pcre.h without -lpcre.
710 * When proxying to a virtual server, use the proxy_reply instead
712 * Fixed typos in DHCP SQL IPPool.
713 * Fix crash when passing multiple arguments to Perl xlat.
715 FreeRADIUS 3.0.3 Mon 12 May 2014 15:30:00 EDT urgency=medium
717 * Everything now builds with no warnings from the C compiler,
718 clang static analyzer, or cppcheck.
719 * rlm_ldap now supports defining the LDAP attribute name via
720 backticked expansion (i.e. shell command) in
721 RADIUS <-> LDAP mappings.
722 * rlm_ldap now supports older style generic attributes.
723 * dynamic expansions (e.g. "%{expr:1 + 2}" are now parsed
724 when the server starts. Syntax errors in the strings
725 are caught, and a descriptive error is printed.
726 * Static regular expressions (e.g. /a*b/) are now parsed
727 when the server starts. Syntax errors in the strings
728 are caught, and a descriptive error is printed.
729 * dynamic expansions are cached after being parsed. They are
730 no longer re-parsed at run-time for every request.
731 * regular expressions are now parsed and cached when the server
733 * Added the %{rest:} expansion to rlm_rest, which will send
734 a GET request to the URL passed as the format string.
735 Any body text will be written to the expansion buffer.
736 * rlm_rest now available as a debian package.
737 * When an 'if' condition statically evaluates to true/false,
738 unlang does more static optimization. For examples, see
739 src/tests/keywords/if-skip
740 * All modules are marked as safe for '-C', which lets the
741 dynamic expansion checks work in more situations.
742 * Added 'none' and 'custom' rlm_rest body types. 'custom'
743 allows sending of arbitrary expanded text and content-type
745 * Added "config" section to Perl. See mods-available/perl
746 * Added '%v' which expands to the server version - Patch
748 * more mis-matched casts are caught in "if" conditions,
749 and descriptive errors are printed.
750 * Support basic response validation in radclient. This allows
751 administrators to write local test cases for their
752 site-specific configurations.
753 * Removed radconf2xml and radmin "show client config" and
754 "show home_server config".
755 * Forbid running with vulnerable versions of OpenSSL.
756 See "allow_vulnerable_openssl" in the "security"
757 subsection of "radiusd.conf"
758 * Catch underlying "heartbleed" problem, so that nothing bad
759 happens even when using a vulnerable version of OpenSSL.
760 * Add locking API for sql_null, linelog, and detail modules,
761 which should improve performance and work around issues
762 on platforms with bad file locking.
763 * Allow DHCP NAKs to be delayed, via setting
764 reply:FreeRADIUS-Response-Delay = 1
765 * Allow tag and array references anywhere attributes
766 are allowed in "unlang".
767 * many enhancements to radsniff, including output
768 to collectd, ipv6 support and packet loss statistics.
769 * Many dictionary updates (ZTE, Brocade, Motorola).
770 * rlm_yubikey now automatically splits passwords from OTP
772 * The detail file reader is now threaded by default.
773 This should improve performance reading the files.
776 * Fix xlat expression %{attribute[n]} so that it actually
777 returns the n'th attribute instead of the first one.
778 * Don't parse string on RHS of update {} when using unary
779 operators (!*). The RHS should always be ignored.
780 * Check for more optional functions in json-c so we can
781 Build with libjson0, which is the name of the json-c package
783 * Fix issue in radmin where the main dictionaries would
784 not be loaded which, depending on the configuration, may
785 have caused validation errors.
786 * Fix handling of "%{reply:3GPP-*}"
787 * Fix rlm_perl garbage attributes
788 * Fix oracle SQL queries, which amongst other things still
789 used the old expansion format, which is no longer
791 * Truncate long format strings and error markers instead of
793 * Fix multiple attribute parsing in rlm_rest JSON.
794 * Don't crash in rlm_rest if connect_uri is commented out
795 in the configuration.
796 * Don't double-escape strings to / from Perl. You may need
797 to double-check your Perl scripts if they use "\" characters.
798 See mods-available/perl for documentation.
799 * Don't re-run "authorize" if a home server fails to respond.
800 * Don't append "0x" to hex output of octets types, for xlat
801 expansions. This is the same as v2, and makes it easier
802 to concatenate multiple attributes of type "octets"
803 * FreeBSD fixes for execinfo linking.
804 * Make some of the module configurations more consistent.
805 * Fix corner cases where STDOUT wouldn't be closed in
807 * Re-enable "update coa" and originating CoA requests.
808 * Prevent multiple threads writing to the sql query logs.
809 * Fix zombie period calculation. Closes #579
810 * Properly parent VPs for talloc, when moving them in map2request.
811 * Various fixes for talloc parent / child relationships
812 * Allow rlm_counter to support VSAs.
813 * Normalize return codes for many modules. "do nothing" is noop,
815 * Run Post-Proxy-Type Fail. Closes #576
816 * Fix DHCP destination port for replies to relays. Closes #591
817 * Do-Not-Respond policy works again Closes #593
818 * Proxy-To-Virtual-Server works again. Closes #596
819 * Build fixes for ancient systems. Closes #607, #608, #609.
820 * %{Module-Return-Code} works again. Closes #610.
821 * Don't increment statistics for Status-Server responses.
823 * A duplicate request isn't a duplicate if the original one
824 is marked "done". This should lower retransmissions from
826 * Fix multiple regular expression and glob memory leaks.
827 * Don't allocate any memory in fr_fault() as it can cause malloc
829 * Temporarily set dumpable flag before calling system in fr_fault()
830 else the debugger may not be able to attach.
831 * Set nonblock on all TCP client sockets.
832 * Fix minor buffer overrun in mschapv2 where some attribute strings
833 were not correctly \0 terminated.
834 * Fix crash on authentication failure with MIT kerberos.
835 * Fix code so that octal escape sequences aren't prematurely unescaped
836 in rlm_sql, radclient, preprocess, and other places. This may
837 require configuration changes, as these sequences will no longer
838 need double escaping (\\) of the backslash.
839 * The connection pools no longer have one connection used twice
840 in certain rare conditions.
841 * Use self pipes for internal signals. The code was there, but was
843 * Don't crash if there are outstanding EAP sessions and were told to
845 * Fix typo in dictionary.rfc4072
847 FreeRADIUS 3.0.2 Fri 21 Mar 2014 08:30:00 EDT urgency=medium
849 * secret keys and LDAP / SQL passwords are now printed as
850 '<<< secret >>>' in debugging mode. Use -Xx to see the
852 * Print out more information about passwords in -Xx,
853 including hashes, comparisons, etc.
854 * Allow cast (and implicit conversion) of integers to IPv4 addresses
855 * More xlats allow attribute references. This means they can
856 operate on binary data. e.g. expr, base64, md5, sha1.
858 * The dictionaries are now auto-loaded. raddb/dictionary
859 should no longer have $INCLUDE ${prefix}/share/dictionary
860 * A "panic_action" can be set to have the server dump a gdb
861 log on SEGV or other fatal error. See radiusd.conf
862 * Add support for SHA-224, SHA-256, SHA-384, SHA-512 to rlm_pap.
863 * Add "%{sha256:}" and "%{sha512:}" xlat functions.
864 * Cache CUI in EAP session resumption.
865 * templates can now have sub-sections, which will be included
866 in the section referencing the template.
867 * Update more dictionaries.
868 * Added more instances of the "always" module, for all return
870 * Suppress broken NASes when proxying. Retransmits which occur
871 more than once per second are rate-limited to once per second.
872 * Allow '&' in more xlat expansions.
873 * Update PostgreSQL schema and queries to record last updated
874 time, and accounting interim.
875 * Optimize more "if" conditions when the server loads. This will
876 avoid work at run time. e.g. ("foo" == "bar") --> FALSE.
877 * Allow removal of all attributes within a list with !* operator.
878 * Allow list to list copies with request qualifiers (outer.).
879 * Add support for ipv4 prefixes and ipv6 addresses and prefixes to
881 * allow radmin command "set module status <module> <code>"
882 which can be used to forcibly enable/disable modules.
883 * pap module now assumes Cleartext-Password if Password-With-Header
884 doesn't have a {...} header.
885 * Added "unpack" module. It can unpack binary data from horrible
886 VSA formats. See raddb/mods-available/unpack
887 * Added example IP Pool for DHCP, using sqlite. From Matthew Newton
888 See raddb/mods-config/sql/ippool-dhcp/
892 * Fix operation of fr_strerror() with RE*() macros.
893 * Don't assert if the connection we're trying to reconnect
895 * Fix %{mschap:User-Name} xlat.
896 * Allow comparisons of signed integers and of ethernet addresses.
897 * Fix parsing of text-based ascend binary filters.
898 * Fix a few minor Coverity and clang analyzer issues.
899 * Log WARNING and ERROR prefixes only once, not twice.
900 * Fix attribute truncation seen in Perl and other places.
901 * Use correct port when DHCP relaying.
902 * Fix behaviour on FreeBSD where sending packets from an interface
903 bound to an IP address would fail when the server was built with
905 * Don't abort() when freeing home servers on exit.
906 * Fix edge case in pairmove() when some attributes could be over-
908 * Do checks for individual sqlite v2 functions so rlm_sqlite builds
909 correctly with more versions of the library.
910 * In heimdal kerberos, create MEMORY ccaches on a per context basis.
911 This prevents issues with the root ccache being used.
912 * Fix corner case with proxying, where home server goes down.
913 * Rate-limit "max_requests" complaint. We don't want to fill the
914 logs when something goes wrong.
915 * Use /dev/urandom for raddb/certs/random, if it exists.
916 * Issue WARNING that old-style clients should no longer be used.
917 * Auto-set secret to "radsec" for tcp+tls home servers.
918 * Fix double free in home_server_add when there is a parse error
920 * rlm_unix checks if the dictionaries are broken, instead of crashing
921 * Fix potential memory corruption when normalising salted password
922 hashes from hex, where the combined hash and salt was > 64 bytes.
923 * Register sqlcounter attributes correctly, and other issues with it
924 * treat 127.0.0.1/32 as being identical to 127.0.0.1
925 * Don't mangle error output of SQL drivers like PostgreSQL
926 * Fix usage of "tls = ${tls}". It could previously cause problems
927 when the reference was used multiple times.
928 * Fix TLS session leak for incoming sockets.
929 * Try harder to clean up memory on exit when using "-mM"
930 * Fix memory leak when home server is down for RadSec connections
931 * rate-limit outgoing connection attempts when the home server
932 is down. It will retry no more than once per second.
933 * When parsing ipv6 address prefixes, always mask off the host
935 * Fix rlm_counter so that it does not create two reply
937 * Fix issues with DHCP Sub-TLVs where the value of the first
938 Sub-TLV would appear corrupted, and subsequent TLVs would
939 not appear in debug output.
940 * Initialize scope in IP address parsing
941 * Prevent vendor attributes and RFC space attributes from clashing
943 * Set source IP address for DHCP packets from DHCP-Server-IP-Address,
944 or DHCP-DHCP-Server-Identifier, if we're unable to otherwise
945 determine the source IP.
946 * Fix POST attribute parsing in rlm_rest.
947 * Fix JSON attribute parsing in rlm_rest.
948 * Don't append trailing & to POST options in rlm_rest (minor).
949 * Process HTTP 100 Continue messages correctly in rlm_rest
950 * Fix generation of long > 512 byte POST payloads, where attribute
951 values on the chunk boundary may have been omitted in rlm_rest.
952 * Remove duplicate escape sequence parsing in rlm_sqlippool and
953 rlm_sqlcounter which caused issues with escaping %. Escape
954 sequence parsing is now handled purely by the xlat functions.
955 * Ensure %% is treated as a string literal, and so not passed to any
956 xlat escape functions for processing.
957 * Correct calculation of Message-Authenticator
958 for CoA packets. Closes #556
960 FreeRADIUS 3.0.1 Mon 13 Jan 2014 14:30:00 EDT urgency=medium
962 * Add "timeout" to exec, and "ntlm_auth_timeout" to mschap.
963 So that run-away child processes are caught earlier.
964 * Allow TLS clients to use "proto = tls", in which case
965 TLS is required. The shared secret is then set to "radsec".
966 * More documentation in the tls virtual server.
967 * Add "date" module for date formatting.
968 See raddb/mods-available/date.
969 * Added unit test suite for internal server functionality
970 * When loading "update" sections, check if the RHS is a literal
971 value. If so, syntax check it immediately.
972 * Update LDAP module documentation and functionality.
973 The generic attribute can now update lists.
974 * Updated dictionary.extreme.
975 * Update sqlippool to do clears as a separate transaction,
976 and at most once per second. This should help MySQL.
977 * Respect control:Response-Packet-Type for all types of
979 * Add support for SSL encryption to the MySQL driver.
980 * Allow arbitrary connection parameters to be used with the
982 * Changes to the OpenLDAP schema to fully expose functionality
983 of the new LDAP module.
984 * Update debian packaging to include a freeradius-config
985 package. This package may be provided as a site local
986 package to avoid fighting with the preinstalled config
990 * Use correct field for ARP setting in DHCP.
991 * Fix crash on debug condition (#454).
992 * Fix a number of minor issues caught by the clang
994 * Set WARNING messages to yellow instead of normal text.
995 * Correct debug colorise logic. Patch from Phil Mayers.
996 * Encode attributes of type "ethernet". No one uses them,
998 * Work around regex initialization issues.
999 * Fix build when linking against OpenSSL.
1000 * Print IDs as positive numbers, which helps for large DHCP
1002 * Fix issue with sql_ippool.
1003 * sqlcounter now uses 64-bit counters, to deal with 4G overflow.
1004 * Fix issues with DHCP subsystem.
1005 * Don't build / install disabled modules, or their config
1007 * Fix build for OSX Mavericks, which hid the header files
1009 * Fix LEAP buffer issue. You should still avoid LEAP.
1010 * Mark "unknown" WiMAX attributes as being WiMAX.
1011 * Fix typo in packet decoder for fragmented extended attrs
1013 * Fix rlm_perl build issues when not using threads.
1014 * Enable %{Response-Packet-Type} again.
1015 * Update configuration file parser to handle "bool"
1017 * Update declarations of global boolean variables to use
1018 "bool" consistently. This fixes an issue where some
1019 modules were instantiated in "config check" mode and
1020 did not work correctly.
1021 * Make more messages debug instead of info, to avoid
1022 polluting the logs with messages that can't be fixed.
1023 * Set operator in internal unlang code to suppress spurious
1025 * Fix debian packaging.
1026 * Added "status" to Debian init script.
1027 * Fix "update outer.request" to update the outer request.
1028 * Don't print TLS debugging messages when not in debug mode.
1029 * Correctly manage counters for "limit" sections of TCP / TLS
1031 * Fix libldap debug output.
1032 * Fix rlm_ldap tls functionality.
1033 * Initialise OpenSSL globals early to avoid issues with the
1035 * Fix typo in sqlcounter expansion code. Fixes #463
1036 * Overwrite previous instances of SQL-User-Name when adding
1038 * Work around bugs in both MIT and heimdal versions of
1039 krb5_copy_context(), which caused segfaults in
1041 * Provide meaningful error messages if Heimdal krb5 is used.
1042 * Fix attribute supression in rlm_detail.
1043 * Exit with error code if child fails to complete server
1044 initialisation after forking. This allows init scripts to
1045 correctly report whether the server started ok.
1047 FreeRADIUS 3.0.0 Mon 7 Oct 2013 15:48:14 EDT urgency=medium
1048 Feature improvements
1049 * Documentation for upgrading from 2.x is in raddb/README.rst
1050 Please follow it. It will make the upgrade easier.
1051 * Moved configuration entries in radiusd.conf to make more sense.
1052 * Added the "integer64" and "ipv4prefix" data types.
1053 * Added RADIUS over TLS (i.e. RadSec). See raddb/sites-available/tls
1054 * Updated internal API to support new attributes and formats
1055 * Added code to send SNMP Traps. See raddb/trigger.conf.
1056 * Added preliminary support for Apple's Grand Central Dispatch
1057 * Added provisions for raddb/dictionary.local, for local changes.
1058 See raddb/dictionary for more details.
1059 * Added packet/s tracking. See max_pps in the "listen" section.
1060 * The %{} expansions and "unlang" conditions are now parsed at server
1061 start. Descriptive errors are produced for syntax and format errors.
1062 * Casting is now supported for "unlang" comparisons. See "man unlang"
1063 e.g. <ipaddr>127.0.0.1 == Framed-IP-Address.
1064 * Direct comparison of attribute references is now supported.
1065 e.g. &Foo == &Bar. This avoids stringification of the attributes.
1066 * Direct assignment of attributes is now supported.
1067 e.g. Foo := &Bar. It also works for "octets" data types.
1068 * Comparisons of IPv4 and IPv6 prefixes are now supported.
1069 The "<" operator means "within the prefix" for comparisons.
1070 * New sha1 xlat expansion (thanks to Alan Buxey)
1071 * Colourised log messages when logging to stdout. Look for yellow
1072 warnings and red errors. Doing this will save you a LOT of grief.
1073 * If the PCRE library is available, use it (insted of the POSIX
1074 functions) to process regular expressions (thanks to Phil Mayers).
1075 * -xv now displays all the features the server was built with, and
1076 the versions of the core libraries (libtalloc, libssl).
1079 * Moved raddb/modules/ to raddb/mods-available/, and raddb/mods-enabled/,
1080 following the examples of other projects.
1081 * Additional files for each module are now in raddb/mods-config/.
1082 See raddb/mods-config/README.rst for documentation.
1083 * Moved "users" to raddb/mods-config/files/authorize
1084 * Moved "hints" and "huntgroups" to raddb/mods-config/preprocess/
1085 * Moved eap.conf to mods-available/eap
1086 * Moved sql.conf to mods-available/sql
1087 * Moved TLS configuration for EAP into a common subsection.
1088 See raddb/mods-available/eap, "tls-config" section.
1089 * Added for MS-CHAP Change Password from Phil Mayers.
1090 See raddb/mods-available/mschap, "passchange" subsection.
1091 * Added EAP-PWD implementation from Dan Harkins
1092 * Added connection pools for modules. This unifies connection
1093 management which was previously different for different modules.
1094 l * SQL now uses the connection pool. See mods-available/sql
1095 * SQL now supports arbitrary Acct-Status-Types.
1096 These changes are not compatible with 2.x.
1097 * SQL now has full support for SQLite. See raddb/sql/main/sqlite/
1098 * SQLite supports auto-creation of new databases on server startup for
1099 bootstrapping purposes.
1100 * LDAP now uses the connection pool. The LDAP module has been
1101 completely re-written for performance and simplicity.
1102 * LDAP now caches groups. This makes multiple group checks MUCH
1104 * Removed all limitations on 253 octet attributes. RFC 6929 allows
1105 for attributes up to 4K in length.
1106 * New rlm_idn module providing an expansion for performing IDNA encoding
1107 of internationalized domain names. Thanks to 'skids'.
1108 * New rlm_yubikey module to validate yubikey OTP tokens.
1109 See raddb/modules/yubikey
1112 * All known bug fixes from 2.2.x are included.
1113 * Removed "addport" functionality.
1114 * Removed many unused or duplicate modules. See raddb/README.rst.
1116 Internal / API changes:
1117 * All traces of the old build system have been removed.
1118 The new build system is faster and simpler.
1119 * clang is fully supported.
1120 * We now use "talloc" for memory management. A number of new
1121 features required this change. Thanks to the Samba people!
1122 * Many internal APIs have been updated to use talloc.
1123 * New API for iterating over VALUE_PAIRs. This is in preparation
1124 for attributes, in version 3.1.
1125 * No new code should directly modify any field of a VALUE_PAIR.
1126 * VALUE_PAIRs contain pointers to DICT_ATTR instead of containing
1127 attribute and vendor fields. This will allow nested attributes.
1128 * Some protocol specific code has been moved out into proto_* modules.
1129 More will come in subsequent versions. See proto_dhcp and proto_vmps.
1130 * Standardised internal logging macros. radlog() should not be used.
1131 See src/include/log.h
1132 * Use OpenSSL hashing functions when available.
1133 * The server now builds with no warnings on most platforms.
1134 * New RADIUS encoder/decoder, to support new formats.
1135 * Added RFC 6929 "extended attributes", via the new encoder/decoder.
1136 * Added full WiMAX support, via the new encoder/decoder. The old
1137 code could not handle some unusual corner cases.
projects / freeradius.git / blob