1 Summary: High-performance and highly configurable free RADIUS server
5 License: GPLv2+ and LGPLv2+
6 Group: System Environment/Daemons
7 URL: http://www.freeradius.org/
9 # Is elliptic curve cryptography supported?
10 %if 0%{?rhel} >= 7 || 0%{?fedora} >= 20
11 %global HAVE_EC_CRYPTO 1
13 %global HAVE_EC_CRYPTO 0
16 %global dist_base freeradius-server
18 #Source0: ftp://ftp.freeradius.org/pub/radius/%{dist_base}.tar.bz2
19 Source0: %{dist_base}.tar.gz
20 Source100: freeradius-radiusd-init
21 Source102: freeradius-logrotate
22 Source103: freeradius-pam-conf
23 Source104: freeradius-tmpfiles.conf
25 Patch1: freeradius-redhat-config.patch
27 %global docdir %{?_pkgdocdir}%{!?_pkgdocdir:%{_docdir}/%{name}-%{version}}
28 %define initddir %{?_initddir:%{_initddir}}%{!?_initddir:%{_initrddir}}
30 BuildRequires: autoconf
31 BuildRequires: gdbm-devel
32 BuildRequires: chrpath
33 BuildRequires: openssl
34 BuildRequires: openssl-devel
35 BuildRequires: pam-devel
36 BuildRequires: zlib-devel
37 BuildRequires: net-snmp-devel
38 BuildRequires: net-snmp-utils
39 BuildRequires: readline-devel
40 BuildRequires: libpcap-devel
41 BuildRequires: libtalloc-devel
42 BuildRequires: pcre-devel
45 BuildRequires: libyubikey-devel
46 BuildRequires: tncfhh-devel
47 BuildRequires: ykclient-devel
50 Requires: openssl >= 1.0.1e-16.el6_5.7
51 Requires(pre): shadow-utils glibc-common
52 Requires(post): /sbin/chkconfig
53 Requires(preun): /sbin/chkconfig
56 The FreeRADIUS Server Project is a high performance and highly configurable
57 GPL'd free RADIUS server. The server is similar in some respects to
58 Livingston's 2.0 server. While FreeRADIUS started as a variant of the
59 Cistron RADIUS server, they don't share a lot in common any more. It now has
60 many more features than Cistron or Livingston, and is much more configurable.
62 FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
63 protocol, as defined in RFC 2865 (and others). It allows Network Access
64 Servers (NAS boxes) to perform authentication for dial-up users. There are
65 also RADIUS clients available for Web servers, firewalls, Unix logins, and
66 more. Using RADIUS allows authentication and authorization for a network to
67 be centralized, and minimizes the amount of re-configuration which has to be
68 done when adding or deleting new users.
71 Group: System Environment/Daemons
72 Summary: FreeRADIUS ABFAb Configuration
73 Requires: %{name} = %{version}-%{release}
74 Requires: freeradius-sqlite
77 This package provides configuration required by an ABFAB (RFC 7055)
78 identity provider or RP proxy.
82 Summary: FreeRADIUS documentation
85 All documentation supplied by the FreeRADIUS project is included
89 Group: System Environment/Daemons
90 Summary: FreeRADIUS utilities
91 Requires: %{name} = %{version}-%{release}
92 Requires: libpcap >= 0.9.4
95 The FreeRADIUS server has a number of features found in other servers,
96 and additional features not found in any other server. Rather than
97 doing a feature by feature comparison, we will simply list the features
98 of the server, and let you decide if they satisfy your needs.
100 Support for RFC and VSA Attributes Additional server configuration
101 attributes Selecting a particular configuration Authentication methods
104 Group: System Environment/Daemons
105 Summary: FreeRADIUS development files
106 Requires: %{name} = %{version}-%{release}
109 Development headers and libraries for FreeRADIUS.
112 Summary: LDAP support for freeradius
113 Group: System Environment/Daemons
114 Requires: %{name} = %{version}-%{release}
115 BuildRequires: openldap-devel
118 This plugin provides the LDAP support for the FreeRADIUS server project.
121 Summary: Kerberos 5 support for freeradius
122 Group: System Environment/Daemons
123 Requires: %{name} = %{version}-%{release}
124 BuildRequires: krb5-devel
127 This plugin provides the Kerberos 5 support for the FreeRADIUS server project.
130 Summary: Perl support for freeradius
131 Group: System Environment/Daemons
132 Requires: %{name} = %{version}-%{release}
133 Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
134 %{?fedora:BuildRequires: perl-devel}
135 BuildRequires: perl-devel
136 BuildRequires: perl(ExtUtils::Embed)
139 This plugin provides the Perl support for the FreeRADIUS server project.
142 Summary: Python support for freeradius
143 Group: System Environment/Daemons
144 Requires: %{name} = %{version}-%{release}
145 BuildRequires: python-devel
148 This plugin provides the Python support for the FreeRADIUS server project.
151 Summary: MySQL support for freeradius
152 Group: System Environment/Daemons
153 Requires: %{name} = %{version}-%{release}
154 BuildRequires: mysql-devel
157 This plugin provides the MySQL support for the FreeRADIUS server project.
160 Summary: Postgresql support for freeradius
161 Group: System Environment/Daemons
162 Requires: %{name} = %{version}-%{release}
163 BuildRequires: postgresql-devel
165 %description postgresql
166 This plugin provides the postgresql support for the FreeRADIUS server project.
169 Summary: SQLite support for freeradius
170 Group: System Environment/Daemons
171 Requires: %{name} = %{version}-%{release}
172 BuildRequires: sqlite-devel
175 This plugin provides the SQLite support for the FreeRADIUS server project.
178 Summary: Unix ODBC support for freeradius
179 Group: System Environment/Daemons
180 Requires: %{name} = %{version}-%{release}
181 BuildRequires: unixODBC-devel
183 %description unixODBC
184 This plugin provides the unixODBC support for the FreeRADIUS server project.
188 %setup -q -n %{dist_base}
189 # Note: We explicitly do not make patch backup files because 'make install'
190 # mistakenly includes the backup files, especially problematic for raddb config files.
194 # Force compile/link options, extra security for network facing daemon
195 %global _hardened_build 1
198 --libdir=%{_libdir}/freeradius \
201 --with-docdir=%{docdir} \
202 --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
203 --with-rlm-sql-postgresql-lib-dir=%{_libdir} \
204 --with-rlm-sql_mysql-include-dir=/usr/include/mysql \
205 --with-mysql-lib-dir=%{_libdir}/mysql \
206 --with-unixodbc-lib-dir=%{_libdir} \
207 --with-rlm-dbm-lib-dir=%{_libdir} \
208 --with-rlm-krb5-include-dir=/usr/kerberos/include \
209 --without-rlm_couchbase \
210 --without-rlm_eap_ikev2 \
211 --without-rlm_example \
213 --without-rlm_smsotp \
214 --without-rlm_sqlhpwippool \
215 --without-rlm_sql_iodbc \
216 --without-rlm_sql_firebird \
217 --without-rlm_sql_db2 \
218 --without-rlm_sql_oracle
223 mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/lib/radiusd
224 make install R=$RPM_BUILD_ROOT
225 for foo in abfab-tr-idp abfab-tls channel_bindings ; do
226 test -e $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sites-enabled/$foo || ln -s ../sites-available/$foo $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sites-enabled
228 for foo in abfab_psk_sql ; do
229 test -e $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/mods-enabled/$foo || ln -s ../mods-available/$foo $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/mods-enabled
233 mkdir -p $RPM_BUILD_ROOT/var/log/radius/radacct
234 touch $RPM_BUILD_ROOT/var/log/radius/{radutmp,radius.log}
236 install -D -m 755 %{SOURCE100} $RPM_BUILD_ROOT/%{initddir}/radiusd
237 install -D -m 644 %{SOURCE102} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/radiusd
238 install -D -m 644 %{SOURCE103} $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/radiusd
240 mkdir -p %{buildroot}%{_sysconfdir}/tmpfiles.d
241 mkdir -p %{buildroot}%{_localstatedir}/run/
242 install -d -m 0710 %{buildroot}%{_localstatedir}/run/radiusd/
243 install -d -m 0700 %{buildroot}%{_localstatedir}/run/radiusd/tmp
244 install -m 0644 %{SOURCE104} %{buildroot}%{_sysconfdir}/tmpfiles.d/radiusd.conf
246 # remove unneeded stuff
247 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.crt
248 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.csr
249 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.der
250 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.key
251 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.pem
252 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/*.p12
253 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/index.*
254 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/serial*
255 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/dh
256 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/certs/random
259 rm -f $RPM_BUILD_ROOT/%{_mandir}/man1/radeapclient.1
261 rm -f $RPM_BUILD_ROOT/usr/sbin/rc.radiusd
262 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.a
263 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.la
265 chrpath --delete $RPM_BUILD_ROOT/%{_libdir}/freeradius/rlm_sql_unixodbc.so
266 chrpath --delete $RPM_BUILD_ROOT/%{_libdir}/freeradius/rlm_sql_postgresql.so
268 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-available/couchbase
270 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/main/mssql
271 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-available/eap.orig
273 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/ippool/oracle
274 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/ippool-dhcp/oracle
275 rm -rf $RPM_BUILD_ROOT/etc/raddb/mods-config/sql/main/oracle
278 # remove unsupported config files
279 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/experimental.conf
280 # install doc files omitted by standard install
281 for f in COPYRIGHT CREDITS INSTALL.rst README.rst VERSION; do
282 cp $f $RPM_BUILD_ROOT/%{docdir}
284 cp LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.gpl
285 cp src/lib/LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.lgpl
286 cp src/LICENSE.openssl $RPM_BUILD_ROOT/%{docdir}/LICENSE.openssl
288 # add Red Hat specific documentation
289 cat >> $RPM_BUILD_ROOT/%{docdir}/REDHAT << EOF
291 Red Hat, RHEL, Fedora, and CentOS specific information can be found on the
292 FreeRADIUS Wiki in the Red Hat FAQ.
294 http://wiki.freeradius.org/guide/Red-Hat-FAQ
296 Please reference that document.
298 All documentation is in the freeradius-doc sub-package.
303 # Make sure our user/group is present prior to any package or subpackage installation
305 getent group radiusd >/dev/null || /usr/sbin/groupadd -r -g 95 radiusd > /dev/null 2>&1
306 getent passwd radiusd >/dev/null || /usr/sbin/useradd -r -g radiusd -u 95 -c "radiusd user" -d %{_localstatedir}/lib/radiusd -s /sbin/nologin radiusd > /dev/null 2>&1
310 if [ $1 -eq 1 ]; then # install
311 /sbin/chkconfig --add radiusd
312 if [ ! -e /etc/raddb/certs/server.pem ]; then
313 /sbin/runuser -g radiusd -c 'umask 007; /etc/raddb/certs/bootstrap' > /dev/null 2>&1
319 if [ $1 -eq 0 ]; then # uninstall
320 /sbin/service radiusd stop > /dev/null 2>&1
321 /sbin/chkconfig --del radiusd
327 if [ $1 -ge 1 ]; then # upgrade
328 /sbin/service radiusd condrestart >/dev/null 2>&1
330 if [ $1 -eq 0 ]; then # uninstall
331 getent passwd radiusd >/dev/null && /usr/sbin/userdel radiusd > /dev/null 2>&1
332 getent group radiusd >/dev/null && /usr/sbin/groupdel radiusd > /dev/null 2>&1
337 %defattr(-,root,root)
340 %doc %{docdir}/LICENSE.gpl
341 %doc %{docdir}/LICENSE.lgpl
342 %doc %{docdir}/LICENSE.openssl
343 %doc %{docdir}/REDHAT
346 %config(noreplace) %{_sysconfdir}/pam.d/radiusd
347 %config(noreplace) %{_sysconfdir}/logrotate.d/radiusd
349 %config %{_sysconfdir}/tmpfiles.d/radiusd.conf
350 %dir %attr(710,radiusd,radiusd) %{_localstatedir}/run/radiusd
351 %dir %attr(700,radiusd,radiusd) %{_localstatedir}/run/radiusd/tmp
352 %dir %attr(755,radiusd,radiusd) %{_localstatedir}/lib/radiusd
355 %dir %attr(755,root,radiusd) /etc/raddb
356 %defattr(-,root,radiusd)
357 /etc/raddb/README.rst
358 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/panic.gdb
360 %attr(644,root,radiusd) %config(noreplace) /etc/raddb/dictionary
361 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/clients.conf
363 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/templates.conf
364 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/trigger.conf
366 # symlink: /etc/raddb/hints -> ./mods-config/preprocess/hints
367 %config /etc/raddb/hints
369 # symlink: /etc/raddb/huntgroups -> ./mods-config/preprocess/huntgroups
370 %config /etc/raddb/huntgroups
372 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/proxy.conf
373 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/radiusd.conf
375 # symlink: /etc/raddb/users -> ./mods-config/files/authorize
376 %config(noreplace) /etc/raddb/users
379 %dir %attr(770,root,radiusd) /etc/raddb/certs
380 %config(noreplace) /etc/raddb/certs/Makefile
381 /etc/raddb/certs/README
382 %config(noreplace) /etc/raddb/certs/xpextensions
383 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/*.cnf
384 %attr(750,root,radiusd) /etc/raddb/certs/bootstrap
387 %dir %attr(750,root,radiusd) /etc/raddb/mods-config
388 /etc/raddb/mods-config/README.rst
389 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/attr_filter
390 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/attr_filter/*
391 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/files
392 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/files/*
393 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/preprocess
394 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/preprocess/*
396 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql
397 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter
398 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui
399 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool
400 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp
401 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main
403 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/unbound
404 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/unbound/default.conf
407 %dir %attr(750,root,radiusd) /etc/raddb/sites-available
408 /etc/raddb/sites-available/README
409 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/abfab-tr-idp
410 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/abfab-tls
411 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/control-socket
412 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/channel_bindings
413 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/decoupled-accounting
414 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/robust-proxy-accounting
415 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/soh
416 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/coa
417 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/example
418 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/inner-tunnel
419 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dhcp
420 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/check-eap-tls
421 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/status
422 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dhcp.relay
423 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/virtual.example.com
424 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/originate-coa
425 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/vmps
426 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/default
427 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/proxy-inner-tunnel
428 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/dynamic-clients
429 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/copy-acct-to-home-server
430 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/buffered-sql
431 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/tls
434 # symlink: /etc/raddb/sites-enabled/xxx -> ../sites-available/xxx
435 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
436 %config(missingok) /etc/raddb/sites-enabled/channel_bindings
437 %config(missingok) /etc/raddb/sites-enabled/inner-tunnel
438 %config(missingok) /etc/raddb/sites-enabled/default
441 %dir %attr(750,root,radiusd) /etc/raddb/mods-available
442 /etc/raddb/mods-available/README.rst
443 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/abfab_psk_sql
444 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/always
445 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/attr_filter
446 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cache
447 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cache_eap
448 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/chap
449 #%attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/couchbase
450 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/counter
451 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/cui
452 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/date
453 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail
454 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail.example.com
455 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/detail.log
456 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dhcp
457 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dhcp_sqlippool
458 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/digest
459 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/dynamic_clients
460 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/eap
461 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/echo
462 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/etc_group
463 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/exec
464 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/expiration
465 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/expr
466 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/files
467 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/idn
468 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/inner-eap
469 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ippool
470 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/linelog
471 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/logintime
472 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mac2ip
473 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mac2vlan
474 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/mschap
475 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ntlm_auth
476 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/opendirectory
477 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/otp
478 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/pam
479 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/pap
480 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/passwd
481 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/preprocess
482 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/python
483 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/radutmp
484 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/realm
485 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/redis
486 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/rediswho
487 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/replicate
488 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/rest
489 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/smbpasswd
490 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/smsotp
491 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/soh
492 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sometimes
493 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sql
494 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sqlcounter
495 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sqlippool
496 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/sradutmp
497 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unix
498 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unpack
499 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/unbound
500 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/utf8
501 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/wimax
502 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/yubikey
505 # symlink: /etc/raddb/mods-enabled/xxx -> ../mods-available/xxx
506 %dir %attr(750,root,radiusd) /etc/raddb/mods-enabled
507 %config(missingok) /etc/raddb/mods-enabled/always
508 %config(missingok) /etc/raddb/mods-enabled/attr_filter
509 %config(missingok) /etc/raddb/mods-enabled/cache_eap
510 %config(missingok) /etc/raddb/mods-enabled/chap
511 %config(missingok) /etc/raddb/mods-enabled/detail
512 %config(missingok) /etc/raddb/mods-enabled/detail.log
513 %config(missingok) /etc/raddb/mods-enabled/dhcp
514 %config(missingok) /etc/raddb/mods-enabled/digest
515 %config(missingok) /etc/raddb/mods-enabled/dynamic_clients
516 %config(missingok) /etc/raddb/mods-enabled/eap
517 %config(missingok) /etc/raddb/mods-enabled/echo
518 %config(missingok) /etc/raddb/mods-enabled/exec
519 %config(missingok) /etc/raddb/mods-enabled/expiration
520 %config(missingok) /etc/raddb/mods-enabled/expr
521 %config(missingok) /etc/raddb/mods-enabled/files
522 %config(missingok) /etc/raddb/mods-enabled/linelog
523 %config(missingok) /etc/raddb/mods-enabled/logintime
524 %config(missingok) /etc/raddb/mods-enabled/mschap
525 %config(missingok) /etc/raddb/mods-enabled/ntlm_auth
526 %config(missingok) /etc/raddb/mods-enabled/pap
527 %config(missingok) /etc/raddb/mods-enabled/passwd
528 %config(missingok) /etc/raddb/mods-enabled/preprocess
529 %config(missingok) /etc/raddb/mods-enabled/radutmp
530 %config(missingok) /etc/raddb/mods-enabled/realm
531 %config(missingok) /etc/raddb/mods-enabled/replicate
532 %config(missingok) /etc/raddb/mods-enabled/soh
533 %config(missingok) /etc/raddb/mods-enabled/sradutmp
534 %config(missingok) /etc/raddb/mods-enabled/unix
535 %config(missingok) /etc/raddb/mods-enabled/unpack
536 %config(missingok) /etc/raddb/mods-enabled/utf8
539 %dir %attr(750,root,radiusd) /etc/raddb/policy.d
540 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/abfab-tr
541 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/accounting
542 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/canonicalization
543 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/control
544 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/cui
545 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/debug
546 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/dhcp
547 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/eap
548 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/filter
549 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.d/operator-name
553 %defattr(-,root,root)
560 %dir %attr(755,root,root) /usr/share/freeradius
561 /usr/share/freeradius/*
564 %dir %attr(700,radiusd,radiusd) /var/log/radius/
565 %dir %attr(700,radiusd,radiusd) /var/log/radius/radacct/
566 %ghost %attr(644,radiusd,radiusd) /var/log/radius/radutmp
567 %ghost %attr(600,radiusd,radiusd) /var/log/radius/radius.log
570 %attr(755,root,root) %{_libdir}/freeradius/lib*.so*
573 %dir %attr(755,root,root) %{_libdir}/freeradius
574 %{_libdir}/freeradius/proto_dhcp.so
575 %{_libdir}/freeradius/proto_vmps.so
576 %{_libdir}/freeradius/rlm_always.so
577 %{_libdir}/freeradius/rlm_attr_filter.so
578 %{_libdir}/freeradius/rlm_cache.so
579 %{_libdir}/freeradius/rlm_chap.so
580 %{_libdir}/freeradius/rlm_counter.so
581 %{_libdir}/freeradius/rlm_cram.so
582 %{_libdir}/freeradius/rlm_date.so
583 %{_libdir}/freeradius/rlm_detail.so
584 %{_libdir}/freeradius/rlm_dhcp.so
585 %{_libdir}/freeradius/rlm_digest.so
586 %{_libdir}/freeradius/rlm_dynamic_clients.so
587 %{_libdir}/freeradius/rlm_eap.so
588 %{_libdir}/freeradius/rlm_eap_gtc.so
589 %{_libdir}/freeradius/rlm_eap_leap.so
590 %{_libdir}/freeradius/rlm_eap_md5.so
591 %{_libdir}/freeradius/rlm_eap_mschapv2.so
592 %{_libdir}/freeradius/rlm_eap_peap.so
593 %{_libdir}/freeradius/rlm_eap_pwd.so
594 %{_libdir}/freeradius/rlm_eap_sim.so
595 %{_libdir}/freeradius/rlm_eap_tls.so
597 %{_libdir}/freeradius/rlm_eap_tnc.so
599 %{_libdir}/freeradius/rlm_eap_ttls.so
600 %{_libdir}/freeradius/rlm_exec.so
601 %{_libdir}/freeradius/rlm_expiration.so
602 %{_libdir}/freeradius/rlm_expr.so
603 %{_libdir}/freeradius/rlm_files.so
604 %{_libdir}/freeradius/rlm_ippool.so
605 %{_libdir}/freeradius/rlm_linelog.so
606 %{_libdir}/freeradius/rlm_logintime.so
607 %{_libdir}/freeradius/rlm_mschap.so
608 %{_libdir}/freeradius/rlm_otp.so
609 %{_libdir}/freeradius/rlm_pam.so
610 %{_libdir}/freeradius/rlm_pap.so
611 %{_libdir}/freeradius/rlm_passwd.so
612 %{_libdir}/freeradius/rlm_preprocess.so
613 %{_libdir}/freeradius/rlm_radutmp.so
614 %{_libdir}/freeradius/rlm_realm.so
615 %{_libdir}/freeradius/rlm_replicate.so
616 %{_libdir}/freeradius/rlm_rest.so
617 %{_libdir}/freeradius/rlm_soh.so
618 %{_libdir}/freeradius/rlm_sometimes.so
619 %{_libdir}/freeradius/rlm_sql.so
620 %{_libdir}/freeradius/rlm_sqlcounter.so
621 %{_libdir}/freeradius/rlm_sqlippool.so
622 %{_libdir}/freeradius/rlm_sql_null.so
623 %{_libdir}/freeradius/rlm_unix.so
624 %{_libdir}/freeradius/rlm_unpack.so
625 %{_libdir}/freeradius/rlm_utf8.so
626 %{_libdir}/freeradius/rlm_wimax.so
627 %{_libdir}/freeradius/rlm_yubikey.so
630 %doc %{_mandir}/man5/clients.conf.5.gz
631 %doc %{_mandir}/man5/dictionary.5.gz
632 %doc %{_mandir}/man5/radiusd.conf.5.gz
633 %doc %{_mandir}/man5/radrelay.conf.5.gz
634 %doc %{_mandir}/man5/rlm_always.5.gz
635 %doc %{_mandir}/man5/rlm_attr_filter.5.gz
636 %doc %{_mandir}/man5/rlm_chap.5.gz
637 %doc %{_mandir}/man5/rlm_counter.5.gz
638 %doc %{_mandir}/man5/rlm_detail.5.gz
639 %doc %{_mandir}/man5/rlm_digest.5.gz
640 %doc %{_mandir}/man5/rlm_expr.5.gz
641 %doc %{_mandir}/man5/rlm_files.5.gz
642 %doc %{_mandir}/man5/rlm_idn.5.gz
643 %doc %{_mandir}/man5/rlm_mschap.5.gz
644 %doc %{_mandir}/man5/rlm_pap.5.gz
645 %doc %{_mandir}/man5/rlm_passwd.5.gz
646 %doc %{_mandir}/man5/rlm_realm.5.gz
647 %doc %{_mandir}/man5/rlm_sql.5.gz
648 %doc %{_mandir}/man5/rlm_unix.5.gz
649 %doc %{_mandir}/man5/unlang.5.gz
650 %doc %{_mandir}/man5/users.5.gz
651 %doc %{_mandir}/man8/raddebug.8.gz
652 %doc %{_mandir}/man8/radiusd.8.gz
653 %doc %{_mandir}/man8/radmin.8.gz
654 %doc %{_mandir}/man8/radrelay.8.gz
657 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
658 %config(missingok) /etc/raddb/sites-enabled/abfab-tr-idp
659 %config(missingok) /etc/raddb/sites-enabled/abfab-tls
660 %config(missingok) /etc/raddb/sites-enabled/channel_bindings
661 %dir %attr(750,root,radiusd) /etc/raddb/mods-enabled
662 %config(missingok) /etc/raddb/mods-enabled/abfab_psk_sql
674 %doc %{_mandir}/man1/radclient.1.gz
675 %doc %{_mandir}/man1/radlast.1.gz
676 %doc %{_mandir}/man1/radtest.1.gz
677 %doc %{_mandir}/man1/radwho.1.gz
678 %doc %{_mandir}/man1/radzap.1.gz
679 %doc %{_mandir}/man1/smbencrypt.1.gz
680 %doc %{_mandir}/man5/checkrad.5.gz
681 %doc %{_mandir}/man8/radcrypt.8.gz
682 %doc %{_mandir}/man8/radsniff.8.gz
683 %doc %{_mandir}/man8/radsqlrelay.8.gz
684 %doc %{_mandir}/man8/rlm_ippool_tool.8.gz
687 /usr/include/freeradius
690 %{_libdir}/freeradius/rlm_krb5.so
691 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/krb5
694 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/perl
696 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/perl
697 /etc/raddb/mods-config/perl/example.pl
699 %{_libdir}/freeradius/rlm_perl.so
702 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/python
703 /etc/raddb/mods-config/python/example.py*
704 /etc/raddb/mods-config/python/radiusd.py*
705 %{_libdir}/freeradius/rlm_python.so
708 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/mysql
709 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf
710 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf
711 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf
712 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf
714 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/mysql
715 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/mysql/queries.conf
716 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/mysql/schema.sql
718 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/mysql
719 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/mysql/queries.conf
720 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/mysql/schema.sql
722 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp/mysql
723 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/mysql/queries.conf
724 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/mysql/schema.sql
725 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql
726 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/setup.sql
727 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/queries.conf
728 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/schema.sql
730 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql/extras
731 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/mysql/extras/wimax
732 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/extras/wimax/queries.conf
733 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/mysql/extras/wimax/schema.sql
735 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/ndb
736 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/ndb/setup.sql
737 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/ndb/schema.sql
738 /etc/raddb/mods-config/sql/main/ndb/README
740 %{_libdir}/freeradius/rlm_sql_mysql.so
743 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/postgresql
744 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/dailycounter.conf
745 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/expire_on_login.conf
746 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/monthlycounter.conf
747 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/postgresql/noresetcounter.conf
749 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/postgresql
750 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/postgresql/queries.conf
751 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/postgresql/schema.sql
753 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/postgresql
754 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/postgresql/queries.conf
755 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/postgresql/schema.sql
757 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/postgresql
758 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/setup.sql
759 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/queries.conf
760 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/schema.sql
762 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/postgresql/extras
763 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/update_radacct_group.sql
764 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/voip-postpaid.conf
765 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/postgresql/extras/cisco_h323_db_schema.sql
767 %{_libdir}/freeradius/rlm_sql_postgresql.so
770 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/counter/sqlite
771 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/dailycounter.conf
772 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/expire_on_login.conf
773 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/monthlycounter.conf
774 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/counter/sqlite/noresetcounter.conf
776 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/cui/sqlite
777 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/sqlite/queries.conf
778 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/cui/sqlite/schema.sql
780 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool/sqlite
781 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/sqlite/queries.conf
782 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool/sqlite/schema.sql
784 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite
785 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite/queries.conf
786 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/ippool-dhcp/sqlite/schema.sql
788 %dir %attr(750,root,radiusd) /etc/raddb/mods-config/sql/main/sqlite
789 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/sqlite/queries.conf
790 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-config/sql/main/sqlite/schema.sql
792 %{_libdir}/freeradius/rlm_sql_sqlite.so
795 %{_libdir}/freeradius/rlm_ldap.so
796 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/ldap
799 %{_libdir}/freeradius/rlm_sql_unixodbc.so
802 * Thu Jul 10 2014 Stefan Paetow <stefan.paetow@ja.net> - 3.0.4-1
803 - Upgrade to upstream 3.0.4 release, configuration compatible with 3.0.1.
804 - Backported to CentOS 6.5
806 * Wed May 14 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.3-1
807 - Upgrade to upstream 3.0.3 release.
808 See upstream ChangeLog for details (in freeradius-doc subpackage).
809 - Minor configuration parsing change: "Double-escaping of characters in Perl,
810 and octal characters has been fixed. If your configuration has text like
811 "\\000", you will need to remove one backslash."
812 - Additionally includes post-release fixes for:
813 * case-insensitive matching in compiled regular expressions not working,
814 * upstream issue #634 "3.0.3 SIGSEGV on config parse",
815 * upstream issue #635 "3.0.x - rlm_perl - strings are still
816 escaped when passed to perl from FreeRADIUS",
817 * upstream issue #639 "foreach may cause ABORT".
818 - Fixes bugs 1097266 1070447
820 * Wed May 7 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.2-1
821 - Upgrade to upstream 3.0.2 release, configuration compatible with 3.0.1.
822 See upstream ChangeLog for details (in freeradius-doc subpackage)
823 - Fixes bugs 1058884 1061408 1070447 1079500
825 * Mon Feb 24 2014 Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 3.0.1-4
826 - Fix CVE-2014-2015 "freeradius: stack-based buffer overflow flaw in rlm_pap
828 - resolves: bug#1066984 (fedora 1066763)
830 * Fri Feb 21 2014 John Dennis <jdennis@redhat.com> - 3.0.1-3
831 - resolves: bug#1068798 (fedora 1068795)
832 rlm_perl attribute values truncated
834 * Sun Jan 19 2014 John Dennis <jdennis@redhat.com> - 3.0.1-2
835 - resolves: bug#1055073 (fedora 1055072)
836 rlm_ippool; bad config file attribute and fails to send reply attributes
837 - resolves: bug#1055567 (fedora 1056227)
839 - change CFLAGS -imacros to -include to address gcc/gdb bug 1004526
840 where gdb will not display source information, only <command-line>
842 * Tue Jan 14 2014 John Dennis <jdennis@redhat.com> - 3.0.1-1
843 - Upgrade to upstream 3.0.1 release, full config compatible with 3.0.0.
844 This is a roll-up of all upstream bugs fixes found in 3.0.0
845 See upstream ChangeLog for details (in freeradius-doc subpackage)
846 - fixes bugs 1053020 1044747 1048474 1043036
848 * Tue Nov 26 2013 John Dennis <jdennis@redhat.com> - 3.0.0-4
849 - resolves: bug#1031035
850 remove radeapclient man page,
851 upstream no longer supports radeapclient, use eapol_test instead
852 - resolves: bug#1031061
853 rlm_eap_leap memory corruption, see freeradius-rlm_leap.patch
854 - move man pages for utils into utils subpackage from doc subpackage
855 - fix HAVE_EC_CRYPTO test to include f20
856 - add new directory /var/run/radiusd/tmp
857 update mods-available/eap so tls-common.verify.tmpdir to point to it
859 * Wed Nov 13 2013 John Dennis <jdennis@redhat.com> - 3.0.0-3
860 - resolves: bug#1029941
861 PW_TYPE_BOOLEAN config item should be declared int, not bool
863 * Mon Oct 28 2013 John Dennis <jdennis@redhat.com> - 3.0.0-2
864 - resolves: bug#1024119
865 tncfhh-devel is now available in RHEL-7, remove conditional BuildRequires
867 * Sun Oct 13 2013 John Dennis <jdennis@redhat.com> - 3.0.0-1
868 - Offical 3.0 gold release from upstream
869 - resolves: bug#1016873
870 - resolves: bug#891297
872 * Sun Sep 8 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.4.rc1
873 - upgrade to second 3.0 release candidate rc1
875 * Mon Aug 26 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.3.rc0
876 - add missingok config attribute to /etc/raddb/sites-enabled/* symlinks
878 * Sat Aug 03 2013 Petr Pisar <ppisar@redhat.com> - 3.0.0-0.2.rc0
881 * Fri Jul 26 2013 Ville Skyttä <ville.skytta@iki.fi> - 3.0.0-0.1.rc0
882 - Install docs to %%{_pkgdocdir} where available.
884 * Mon Jul 22 2013 John Dennis <jdennis@redhat.com> - 3.0.0-0.rc0
885 - Upgrade to new upstream major version release
887 * Wed Jul 17 2013 Petr Pisar <ppisar@redhat.com> - 2.2.0-7
890 * Wed Feb 13 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.2.0-6
891 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
893 * Fri Dec 14 2012 John Dennis <jdennis@redhat.com> - 2.2.0-5
894 - resolves: bug#850119 - Introduce new systemd-rpm macros (>= F18)
896 * Thu Dec 13 2012 John Dennis <jdennis@redhat.com> - 2.2.0-4
897 - add compile option -fno-strict-aliasing
899 * Thu Dec 13 2012 John Dennis <jdennis@redhat.com> - 2.2.0-3
900 - specify homedir (/var/lib/radiusd) for radiusd user in useradd,
901 do not permit useradd to default the homedir.
903 * Wed Dec 12 2012 John Dennis <jdennis@redhat.com> - 2.2.0-2
904 - add security options to compiler/linker
906 * Mon Dec 10 2012 John Dennis <jdennis@redhat.com> - 2.2.0-1
907 - resolves: bug#876564 - fails to start without freeradius-mysql
908 - use upstream version of freeradius-exclude-config-file.patch
910 * Wed Oct 3 2012 John Dennis <jdennis@redhat.com> - 2.2.0-0
911 - Add new patch to avoid reading .rpmnew, .rpmsave and other invalid
912 files when loading config files
913 - Upgrade to new 2.2.0 upstream release
914 - Upstream changelog for 2.1.12:
916 * 100% configuration file compatible with 2.1.x.
917 The only fix needed is to disallow "hashsize=0" for rlm_passwd
918 * Update Aruba, Alcatel Lucent, APC, BT, PaloAlto, Pureware,
919 Redback, and Mikrotik dictionaries
920 * Switch to using SHA1 for certificate digests instead of MD5.
921 See raddb/certs/*.cnf
922 * Added copyright statements to the dictionaries, so that we know
923 when people are using them.
924 * Better documentation for radrelay and detail file writer.
925 See raddb/modules/radrelay and raddb/radrelay.conf
926 * Added TLS-Cert-Subject-Alt-Name-Email from patch by Luke Howard
927 * Added -F <file> to radwho
928 * Added query timeouts to MySQL driver. Patch from Brian De Wolf.
929 * Add /etc/default/freeradius to debian package.
930 Patch from Matthew Newton
931 * Finalize DHCP and DHCP relay code. It should now work everywhere.
932 See raddb/sites-available/dhcp, src_ipaddr and src_interface.
933 * DHCP capabilitiies are now compiled in by default.
934 It runs as a DHCP server ONLY when manually enabled.
935 * Added one letter expansions: %G - request minute and %I request
937 * Added script to convert ISC DHCP lease files to SQL pools.
938 See scripts/isc2ippool.pl
939 * Added rlm_cache to cache arbitrary attributes.
940 * Added max_use to rlm_ldap to force connection to be re-established
941 after a given number of queries.
942 * Added configtest option to Debian init scripts, and automatic
943 config test on restart.
944 * Added cache config item to rlm_krb5. When set to "no" ticket
945 caching is disabled which may increase performance.
948 * Fix CVE-2012-3547. All users of 2.1.10, 2.1.11, 2.1.12,
949 and 802.1X should upgrade immediately.
950 * Fix typo in detail file writer, to skip writing if the packet
951 was read from this detail file.
952 * Free cached replies when closing resumed SSL sessions.
953 * Fix a number of issues found by Coverity.
954 * Fix memory leak and race condition in the EAP-TLS session cache.
955 Thanks to Phil Mayers for tracking down OpenSSL APIs.
956 * Restrict ATTRIBUTE names to character sets that make sense.
957 * Fix EAP-TLS session Id length so that OpenSSL doesn't get
959 * Fix SQL IPPool logic for non-timer attributes. Closes bug #181
960 * Change some informational messages to DEBUG rather than error.
961 * Portability fixes for FreeBSD. Closes bug #177
962 * A much better fix for the _lt__PROGRAM__LTX_preloaded_symbols
964 * Safely handle extremely long lines in conf file variable expansion
965 * Fix for Debian bug #606450
966 * Mutex lock around rlm_perl Clone routines. Patch from Eike Dehling
967 * The passwd module no longer permits "hashsize = 0". Setting that
968 is pointless for a host of reasons. It will also break the server.
969 * Fix proxied inner-tunnel packets sometimes having zero authentication
970 vector. Found by Brian Julin.
971 * Added $(EXEEXT) to Makefiles for portability. Closes bug #188.
972 * Fix minor build issue which would cause rlm_eap to be built twice.
973 * When using "status_check=request" for a home server, the username
974 and password must be specified, or the server will not start.
975 * EAP-SIM now calculates keys from the SIM identity, not from the
976 EAP-Identity. Changing the EAP type via NAK may result in
977 identities changing. Bug reported by Microsoft EAP team.
978 * Use home server src_ipaddr when sending Status-Server packets
979 * Decrypt encrypted ERX attributes in CoA packets.
980 * Fix registration of internal xlat's so %{mschap:...} doesn't
981 disappear after a HUP.
982 * Can now reference tagged attributes in expansions.
983 e.g. %{Tunnel-Type:1} and %{Tunnel-Type:1[0]} now work.
984 * Correct calculation of Message-Authenticator for CoA and Disconnect
985 replies. Patch from Jouni Malinen
986 * Install rad_counter, for managing rlm_counter files.
987 * Add unique index constraint to all SQL flavours so that alternate
988 queries work correctly.
989 * The TTLS diameter decoder is now more lenient. It ignores
990 unknown attributes, instead of rejecting the TTLS session.
991 * Use "globfree" in detail file reader. Prevents very slow leak.
993 * Operator =~ shouldn't copy the attribute, like :=. It should
994 instead behave more like ==.
995 * Build main Debian package without SQL dependencies
996 * Use max_queue_size in threading code
997 * Update permissions in raddb/sql/postgresql/admin.sql
998 * Added OpenSSL_add_all_algorithms() to fix issues where OpenSSL
999 wouldn't use methods it knew about.
1000 * Add more sanity checks in dynamic_clients code so the server won't
1001 crash if it attempts to load a badly formated client definition.
1003 * Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.12-10
1004 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
1006 * Fri Jun 08 2012 Petr Pisar <ppisar@redhat.com> - 2.1.12-9
1009 * Tue May 15 2012 John Dennis <jdennis@redhat.com> - 2.1.12-8
1010 - resolves: bug#821407 - openssl dependency
1012 * Sat Apr 14 2012 John Dennis <jdennis@redhat.com> - 2.1.12-7
1013 - resolves: bug#810605 Segfault with freeradius-perl threading
1015 * Tue Feb 28 2012 John Dennis <jdennis@redhat.com> - 2.1.12-6
1016 Fixing bugs in RHEL6 rebase, applying fixes here as well
1017 resolves: bug#700870 freeradius not compiled with --with-udpfromto
1018 resolves: bug#753764 shadow password expiration does not work
1019 resolves: bug#712803 radtest script is not working with eap-md5 option
1020 resolves: bug#690756 errors in raddb/sql/postgresql/admin.sql template
1022 * Tue Feb 7 2012 John Dennis <jdennis@redhat.com> - 2.1.12-5
1023 - resolves: bug#781877 (from RHEL5) rlm_dbm_parse man page misspelled
1024 - resolves: bug#760193 (from RHEL5) radtest PPPhint option is not parsed properly
1026 * Sun Jan 15 2012 John Dennis <jdennis@redhat.com> - 2.1.12-4
1027 - resolves: bug#781744
1028 systemd service file incorrectly listed pid file as
1029 /var/run/radiusd/radiusd which it should have been
1030 /var/run/radiusd/radiusd.pid
1032 * Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.12-3
1033 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
1035 * Mon Oct 31 2011 John Dennis <jdennis@redhat.com> - 2.1.12-2
1036 - rename /etc/tmpfiles.d/freeradius.conf to /etc/tmpfiles.d/radiusd.conf
1037 remove config(noreplace) because it must match files section and
1038 permissions differ between versions.
1039 - fixup macro usage for /var/run & /var/lib
1041 * Mon Oct 3 2011 John Dennis <jdennis@redhat.com> - 2.1.12-1
1042 - Upgrade to latest upstream release: 2.1.12
1043 - Upstream changelog for 2.1.12:
1044 Feature improvements
1045 * Updates to dictionary.erx, dictionary.siemens, dictionary.starent,
1046 dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol
1047 * Added support for PCRE from Phil Mayers
1048 * Configurable file permission in rlm_linelog
1049 * Added "relaxed" option to rlm_attr_filter. This copies attributes
1050 if at least one match occurred.
1051 * Added documentation on dynamic clients.
1052 See raddb/modules/dynamic_clients.
1053 * Added support for elliptical curve cryptography.
1054 See ecdh_curve in raddb/eap.conf.
1055 * Added support for 802.1X MIBs in checkrad
1056 * Added support for %{rand:...}, which generates a uniformly
1057 distributed number between 0 and the number you specify.
1058 * Created "man" pages for all installed commands, and documented
1059 options for all commands. Patch from John Dennis.
1060 * Allow radsniff to decode encrypted VSAs and CoA packets.
1061 Patch from Bjorn Mork.
1062 * Always send Message-Authenticator in radtest. Patch from John Dennis.
1063 radclient continues to be more flexible.
1064 * Updated Oracle schema and queries
1065 * Added SecurID module. See src/modules/rlm_securid/README
1068 * Fix memory leak in rlm_detail
1069 * Fix "failed to insert event"
1070 * Allow virtual servers to be reloaded on HUP.
1071 It no longer complains about duplicate virtual servers.
1072 * Fix %{string:...} expansion
1073 * Fix "server closed socket" loop in radmin
1074 * Set ownership of control socket when starting up
1075 * Always allow root to connect to control socket, even if
1076 "uid" is set. They're root. They can already do anything.
1077 * Save all attributes in Access-Accept when proxying inner-tunnel
1079 * Fixes for DHCP relaying.
1080 * Check certificate validity when using OCSP.
1081 * Updated Oracle "configure" script
1082 * Fixed typos in dictionary.alvarion
1083 * WARNING on potential proxy loop.
1084 * Be more aggressive about clearing old requests from the
1086 * Don't open network sockets when using -C
1088 * Wed Sep 21 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-7
1089 - restore defattr customization in the main package
1091 * Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-6
1092 - add missing systemd scriptlets
1094 * Thu Sep 8 2011 Tom Callaway <spot@fedoraproject.org> - 2.1.11-5
1095 - convert to systemd
1097 * Thu Jul 21 2011 Petr Sabata <contyk@redhat.com> - 2.1.11-4
1100 * Wed Jul 20 2011 Petr Sabata <contyk@redhat.com> - 2.1.11-3
1103 * Thu Jun 23 2011 John Dennis <jdennis@redhat.com> - 2.1.11-2
1104 - reload the server (i.e. HUP) after logrotate
1106 * Wed Jun 22 2011 John Dennis <jdennis@redhat.com> - 2.1.11-1
1107 - Upgrade to latest upstream release: 2.1.11
1108 - Remove the following two patches as upstream has incorporated them:
1109 freeradius-radtest-ipv6.patch
1110 freeradius-lt-dladvise.patch
1111 - Upstream changelog for 2.1.11:
1112 Feature improvements
1113 * Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines.
1114 All vendors need to read it and follow its directions.
1115 * Microsoft SoH support for PEAP from Phil Mayers.
1117 * Certificate "bootstrap" script now checks for certificate expiry.
1118 See comments in raddb/eap.conf, and then "make_cert_command".
1119 * Support for dynamic expansion of EAP-GTC challenges.
1120 Patch from Alexander Clouter.
1121 * OCSP support from Alex Bergmann. See raddb/eap.conf, "ocsp"
1123 * Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3.
1124 * Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna.
1125 * Experimental redis support from Gabriel Blanchard.
1126 See raddb/modules/redis and raddb/modules/rediswho
1127 * Add "key" to rlm_fastusers. Closes bug #126.
1128 * Added scripts/radtee from original software at
1129 http://horde.net/~jwm/software/misc/comparison-tee
1130 * Updated radmin "man" page for new commands.
1131 * radsniff now prints the hex decoding of the packet (-x -x -x)
1132 * mschap module now reloads its configuration on HUP
1133 * Added experimental "replicate" module. See raddb/modules/replicate
1134 * Policy "foo" can now refer to module "foo". This lets you
1135 over-ride the behavior of a module.
1136 * Policy "foo.authorize" can now over-ride the behavior of module
1137 "foo", "authorize" method.
1138 * Produce errors in more situations when the configuration files
1139 have invalid syntax.
1142 * Ignore pre/post-proxy sections if proxying is disabled
1143 * Add configure checks for pcap_fopen*.
1144 * Fix call to otp_write in rlm_otp
1145 * Fix issue with Access-Challenge checking from 2.1.10, when the
1146 debug flag was set after server startup. Closes #116 and #117.
1147 * Fix typo in zombie period start time.
1148 * Fix leak in src/main/valuepair.c. Patch from James Ballantine.
1149 * Allow radtest to use spaces in shared secret.
1150 Patch from Cedric Carree.
1151 * Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak.
1152 Patch from James Ballantine.
1153 * Remove MN-FA key generation. The NAS does this, not AAA.
1154 Patch from Ben Weichman.
1155 * Include dictionary.mikrotik by default. Closes bug #121.
1156 * Add group membership query to MS-SQL examples. Closes bug #120.
1157 * Don't cast NAS-Port to integer in Postgresql queries.
1159 * Fixes for libtool and autoconf from Sam Hartman.
1160 * radsniff should read the dictionaries in more situations.
1161 * Use fnmatch to check for detail file reader==writer.
1163 * Check for short writes (i.e. disk full) in rlm_detail.
1164 Closes bug #130. Patches and testing from John Morrissey.
1165 * Fix typo in src/lib/token.c. Closes bug #124
1166 * Allow workstation trust accounts to use MS-CHAP.
1168 * Assigning foo=`/bin/echo hello` now produces a syntax error
1169 if it is done outside of an "update" section.
1170 * Fix "too many open file descriptors" problem when using
1171 "verify client" in eap.conf.
1172 * Many fixes to dialup_admin for PHP5, by Stefan Winter.
1173 * Allow preprocess module to have "hints = " and "huntgroups =",
1174 which allows them to be empty or non-existent.
1175 * Renamed "php3" files to "php" in dialup_admin/
1176 * Produce error when sub-TLVs are used in a dictionary. They are
1177 supported only in the "master" branch, and not in 2.1.x.
1178 * Minor fix in dictionary.redback. Closes bug #138.
1179 * Fixed MySQL "NULL" issues in ippool.conf. Closes bug #129.
1180 * Fix to Access-Challenge warning from Ken-ichirou Matsuzawa.
1182 * DHCP fixes to send unicast packets in more situations.
1183 * Fix to udpfromto, to enable it to work on IPv6 networks.
1184 * Fixes to the Oracle accounting_onoff_query.
1185 * When using both IPv4 and IPv6 home servers, ensure that we use the
1186 correct local socket for proxying. Closes bug #143.
1187 * Suppress messages when thread pool is nearly full, all threads
1188 are busy, and we can't create new threads.
1189 * IPv6 is now enabled for udpfromto. Closes bug #141
1190 * Make sqlippool query buffer the same size as sql module.
1192 * Make Coa / Disconnect proxying work again.
1193 * Configure scripts for rlm_caching from Nathaniel McCallum
1194 * src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL.
1195 * Updated password routines to use time-insensitive comparisons.
1196 This prevents timing attacks (though none are known).
1197 * Allow sqlite module to do normal SELECT queries.
1198 * rlm_wimax now has a configure script
1199 * Moved Ascend, USR, and Motorola "illegal" dictionaries to separate
1200 files. See share/dictionary for explanations.
1201 * Check for duplicate module definitions in the modules{} section,
1202 and refuse to start if duplicates are found.
1203 * Check for duplicate virtual servers, and refuse to start if
1204 duplicates are found.
1205 * Don't use udpfromto if source is INADDR_ANY. Closes bug #148.
1206 * Check pre-conditions before running radmin "inject file".
1207 * Don't over-ride "no match" with "match" for regexes.
1209 * Make retry and error message configurable in mschap.
1210 See raddb/modules/mschap
1211 * Allow EAP-MSCHAPv2 to send error message to client. This change
1212 allows some clients to prompt the user for a new password.
1213 See raddb/eap.conf, mschapv2 section, "send_error".
1214 * Load the default virtual server before any others.
1215 This matches what users expect, and reduces confusion.
1216 * Fix configure checks for udpfromto. Fixes Debian bug #606866
1217 * Definitive fix for bug #35, where the server could crash under
1218 certain loads. Changes src/lib/packet.c to use RB trees.
1219 * Updated "configure" checks to allow IPv6 udpfromto on Linux.
1220 * SQL module now returns NOOP if the accounting start/interim/stop
1221 queries don't do anything.
1222 * Allow %%{outer.control: ... } in string expansions
1223 * home_server coa config now matches raddb/proxy.conf
1224 * Never send a reply to a DHCP Release.
1226 * Thu Jun 16 2011 Marcela Mašláňová <mmaslano@redhat.com> - 2.1.10-8
1229 * Wed Mar 23 2011 John Dennis <jdennis@redhat.com> - 2.1.10-7
1230 - Resolves: #689045 Using rlm_perl cause radiusd failed to start
1231 Fix configure typo which caused lt_dladvise_* functions to be skipped.
1232 run autogen.sh because HAVE_LT_DLADVISE_INIT isn't in src/main/autogen.h
1233 Implemented by: freeradius-lt-dladvise.patch
1235 * Wed Mar 23 2011 John Dennis <jdennis@redhat.com> - 2.1.10-6
1236 - Resolves: #599528 - make radtest IPv6 compatible
1238 * Wed Mar 23 2011 Dan Horák <dan@danny.cz> - 2.1.10-5
1239 - rebuilt for mysql 5.5.10 (soname bump in libmysqlclient)
1241 * Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.10-4
1242 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
1244 * Sat Jan 1 2011 John Dennis <jdennis@redhat.com> - 2.1.10-3
1245 - bug 666589 - removing freeradius from system does not delete the user "radiusd"
1246 fix scriptlet argument testing, simplify always exiting with zero
1248 * Thu Dec 30 2010 John Dennis <jdennis@redhat.com> - 2.1.10-2
1249 - rebuild for new MySQL libs
1251 * Tue Oct 19 2010 John Dennis <jdennis@redhat.com> - 2.1.10-1
1252 Feature improvements
1253 * Install the "radcrypt" program.
1254 * Enable radclient to send requests containing MS-CHAPv1
1255 Send packets with: MS-CHAP-Password = "password". It will
1256 be automatically converted to the correct MS-CHAP attributes.
1257 * Added "-t" command-line option to radtest. You can use "-t pap",
1258 "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap"
1259 * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
1260 This change and the previous one makes PEAP testing much easier.
1261 * Added more documentation and examples for the "passwd" module.
1262 * Added dictionaries for RFC 5607 and RFC 5904.
1263 * Added note in proxy.conf that we recommend setting
1264 "require_message_authenticator = yes" for all home servers.
1265 * Added example of second "files" configuration, with documentation.
1266 This shows how and where to use two instances of a module.
1267 * Updated radsniff to have it write pcap files, too. See '-w'.
1268 * Print out large WARNING message if we send an Access-Challenge
1269 for EAP, and receive no follow-up messages from the client.
1270 * Added Cached-Session-Policy for EAP session resumption. See
1272 * Added support for TLS-Cert-* attributes. For details, see
1273 raddb/sites-available/default, "post-auth" section.
1274 * Added sample raddb/modules/{opendirectory,dynamic_clients}
1275 * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
1276 * Added RFCs 5607, 5904, and 5997.
1277 * For EAP-TLS, client certificates can now be validated using an
1278 external command. See eap.conf, "validate" subsection of "tls".
1279 * Made rlm_pap aware of {nthash} prefix, for compatibility with
1280 legacy RADIUS systems.
1281 * Add Module-Failure-Message for mschap module (ntlm_auth)
1282 * made rlm_sql_sqlite database configurable. Use "filename"
1284 * Added %%{tolower: ...string ... }, which returns the lowercase
1285 version of the string. Also added %%{toupper: ... } for uppercase.
1288 * Fix endless loop when there are multiple sub-options for
1290 * More debug output when sending / receiving DHCP packets.
1291 * EAP-MSCHAPv2 should return the MPPE keys when used outside
1292 of a TLS tunnel. This is needed for IKE.
1293 * Added SSL "no ticket" option to prevent SSL from creating sessions
1294 without IDs. We need the IDs, so this option should be set.
1295 * Fix proxying of packets from inside a TTLS/PEAP tunnel.
1297 * Allow IPv6 address attributes to be created from domain names
1299 * Set the string length to the correct value when parsing double
1300 quotes. Closes bug #88.
1301 * No longer look users up in /etc/passwd in the default configuration.
1302 This can be reverted by enabling "unix" in the "authorize" section.
1303 * More #ifdef's to enable building on systems without certain
1305 * Fixed SQL-Group comparison to register only if the group
1307 * Fixed SQL-Group comparison to register <instance>-SQL-Group,
1308 just like rlm_ldap. This lets you have multiple SQL group checks.
1309 * Fix scanning of octal numbers in "unlang". Closes bug #89.
1310 * Be less aggressive about freeing "stuck" requests. Closes bug #35.
1311 * Fix example in "originate-coa" to refer to the correct packet.
1312 * Change default timeout for dynamic clients to 1 hour, not 1 day.
1313 * Allow passwd module to map IP addresses, too.
1314 * Allow passwd module to be used for CoA packets
1315 * Put boot filename into DHCP header when DHCP-Boot-Filename
1317 * raddb/certs/Makefile no longer has certs depend on index.txt and
1318 serial. Closes bug #64.
1319 * Ignore NULL errorcode in PostgreSQL client. Closes bug #39
1320 * Made Exec-Program and Exec-Program-Wait work in accounting
1321 section again. See sites-available/default.
1322 * Fix long-standing memory leak in esoteric conditions. Found
1324 * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
1325 This will automatically convert more passwords.
1326 * Updated rlm_pap to decode Password-With-Header, if it was base64
1327 encoded, and to treat the contents as potentially binary data.
1328 * Fix Novell eDir code to use the right function parameters.
1330 * Allow spaces to be escaped when executing external programs.
1332 * Be less restrictive about checking permissions on control socket.
1333 If we're root, allow connecting to a non-root socket.
1334 * Remove control socket on normal server exit. If the server isn't
1335 running, the control socket should not exist.
1336 * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
1337 calculations. It *MAY* be different (upper / lower case) from
1338 the User-Name attribute. Closes bug #17.
1339 * If the EAP-TLS methods have problems, more SSL errors are now
1340 available in the Module-Failure-Message attribute.
1341 * Update Oracle configure scripts. Closes bug #57.
1342 * Added text to DESC fields of doc/examples/openldap.schema
1343 * Updated more documentation to use "Restructured Text" format.
1344 Thanks to James Lockie.
1345 * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11.
1346 * Return error for potential proxy loops when using "-XC"
1347 * Produce better error messages when slow databases block
1349 * Added notes on DHCP broadcast packets for FreeBSD.
1350 * Fixed crash when parsing some date strings. Closes bug #98
1351 * Improperly formatted Attributes are now printed as "Attr-##".
1352 If they are not correct, they should not use the dictionary name.
1353 * Fix rlm_digest to be check the format of the Digest attributes,
1354 and return "noop" rather than "fail" if they're not right.
1355 * Enable "digest" in raddb/sites-available/default. This change
1356 enables digest authentication to work "out of the box".
1357 * Be less aggressive about marking home servers as zombie.
1358 If they are responding to some packets, they are still alive.
1359 * Added Packet-Transmit-Counter, to track detail file retransmits.
1361 * Added configure check for lt_dladvise_init(). If it exists, then
1362 using it solves some issues related to libraries loading libraries.
1363 * Added indexes to the MySQL IP Pool schema.
1364 * Print WARNING message if too many attributes are put into a packet.
1365 * Include dhcp test client (not built by default)
1366 * Added checks for LDAP constraint violation. Closes bug #18.
1367 * Change default raddebug timeout to 60 seconds.
1368 * Made error / warning messages more consistent.
1369 * Correct back-slash handling in variable expansion. Closes bug #46.
1370 You SHOULD check your configuration for backslash expansion!
1371 * Fix typo in "configure" script (--enable-libltdl-install)
1372 * Use local libltdl in more situations. This helps to avoid
1373 compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
1374 * Fix hang on startup when multiple home servers were defined
1375 with "src_ipaddr" field.
1376 * Fix 32/64 bit issue in rlm_ldap. Closes bug #105.
1377 * If the first "listen" section defines 127.0.0.1, don't use that
1378 as a source IP for proxying. It won't work.
1379 * When Proxy-To-Realm is set to a non-existent realm, the EAP module
1380 should handle the request, rather than expecting it to be proxied.
1381 * Fix IPv4 issues with udpfromto. Closes bug #110.
1382 * Clean up child processes of raddebug. Closes bugs #108 and #109
1383 * retry OTP if the OTP daemon fails. Closes bug #58.
1384 * Multiple calls to ber_printf seem to work better. Closes #106.
1385 * Fix "unlang" so that "attribute not found" is treated as a "false"
1386 comparison, rather than a syntax error in the configuration.
1387 * Fix issue with "Group" attribute.
1389 * Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
1390 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
1392 * Tue Jun 01 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
1393 - Mass rebuild with perl-5.12.0
1395 * Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
1396 - update to latest upstream, mainly bug fix release
1397 Feature improvements
1398 * Add radmin command "stats detail <file>" to see what
1399 is going on inside of a detail file reader.
1400 * Added documentation for CoA. See raddb/sites-available/coa
1401 * Add sub-option support for Option 82. See dictionary.dhcp
1402 * Add "server" field to default SQL NAS table, and documented it.
1405 * Reset "received ping" counter for Status-Server checks. In some
1406 corner cases it was not getting reset.
1407 * Handle large VMPS attributes.
1408 * Count accounting responses from a home server in SNMP / statistics
1410 * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
1411 * radmin packet counter statistics are now unsigned, for numbers
1412 2^31..2^32. After that they roll over to zero.
1413 * Be more careful about expanding data in PAP and MS-CHAP modules.
1414 This prevents login failures when passwords contain '{'.
1415 * Clean up zombie children if there were many "exec" modules being
1416 run for one packet, all with "wait = no".
1417 * re-open log file after HUP. Closes bug #63.
1418 * Fix "no response to proxied packet" complaint for Coa / Disconnect
1419 packets. It shouldn't ignore replies to packets it sent.
1420 * Calculate IPv6 netmasks correctly. Closes bug #69.
1421 * Fix SQL module to re-open sockets if they unexpectedly close.
1422 * Track scope for IPv6 addresses. This lets us use link-local
1423 addresses properly. Closes bug #70.
1424 * Updated Makefiles to no longer use the shell for recursing into
1425 subdirs. "make -j 2" should now work.
1426 * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
1428 * Updated Makefiles so that "make reconfig" no longer uses the shell
1429 for recursing into subdirs, and re-builds all "configure" files.
1430 * Used above method to regenerate all configure scripts.
1432 * Updated SQL module to allow "server" field of "nas" table
1433 to be blank: "". This means the same as it being NULL.
1434 * Fixed regex realm example. Create Realm attribute with value
1435 of realm from User-Name, not from regex. Closes bug #40.
1436 * If processing a DHCP Discover returns "fail / reject", ignore
1437 the packet rather than sending a NAK.
1438 * Allow '%%' to be escaped in sqlcounter module.
1439 * Fix typo internal hash table.
1440 * For PEAP and TTLS, the tunneled reply is added to the reply,
1441 rather than integrated via the operators. This allows multiple
1442 VSAs to be added, where they would previously be discarded.
1443 * Make request number unsigned. This changes nothing other than
1444 the debug output when the server receives more than 2^31 packets.
1445 * Don't block when reading child output in 'exec wait'. This means
1446 that blocked children get killed, instead of blocking the server.
1447 * Enabled building without any proxy functionality
1448 * radclient now prefers IPv4, to match the default server config.
1449 * Print useful error when a realm regex is invalid
1450 * relaxed rules for preprocess module "with_cisco_vsa_hack". The
1451 attributes can now be integer, ipaddr, etc. (i.e. non-string)
1452 * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
1454 * Update configure script for rlm_python to avoid dynamic linking
1455 problems on some platforms.
1456 * Work-around for bug #35
1457 * Do suid to "user" when running in debug mode as root
1458 * Make "allow_core_dumps" work in more situations.
1459 * In detail file reader, treat bad records as EOF.
1460 This allows it to continue working when the disk is full.
1461 * Fix Oracle default accounting queries to work when there are no
1462 gigawords attributes. Other databases already had the fix.
1463 * Fix rlm_sql to show when it opens and closes sockets. It already
1464 says when it cannot connect, so it should say when it can connect.
1465 * "chmod -x" for a few C source files.
1466 * Pull update spec files, etc. from RedHat into the redhat/ directory.
1467 * Allow spaces when parsing integer values. This helps people who
1468 put "too much" into an SQL value field.
1470 * Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
1471 - resolves: bug #526559 initial install should run bootstrap to create certificates
1472 running radiusd in debug mode to generate inital temporary certificates
1473 is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
1474 rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
1475 - resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
1476 the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
1477 were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months
1479 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
1480 - update to latest upstream
1481 Feature improvements
1482 * Print more descriptive error message for too many EAP sessions.
1483 This gives hints on what to do when "failed to store handler"
1484 * Commands received from radmin are now printed on stdout when
1486 * Allow accounting packets to be written to a detail file, even
1487 if they were read from a different detail file.
1488 * Added OpenSSL license exception (src/LICENSE.openssl)
1491 * DHCP sockets can now set the broadcast flag before binding to a
1492 socket. You need to set "broadcast = yes" in the DHCP listener.
1493 * Be more restrictive on string parsing in the config files
1494 * Fix password length in scripts/create-users.pl
1495 * Be more flexible about parsing the detail file. This allows
1496 it to read files where the attributes have been edited.
1497 * Ensure that requests read from the detail file are cleaned up
1498 (i.e. don't leak) if they are proxied without a response.
1499 * Write the PID file after opening sockets, not before
1501 * Proxying large numbers of packets no longer gives error
1502 "unable to open proxy socket".
1503 * Avoid mutex locks in libc after fork
1504 * Retry packet from detail file if there was no response.
1505 * Allow old-style dictionary formats, where the vendor name is the
1506 last field in an ATTRIBUTE definition.
1507 * Removed all recursive use of mutexes. Some systems just don't
1509 * Allow !* to work as documented.
1510 * make templates work (see templates.conf)
1511 * Enabled "allow_core_dumps" to work again
1512 * Print better errors when reading invalid dictionaries
1513 * Sign client certificates with CA, rather than server certs.
1514 * Fix potential crash in rlm_passwd when file was closed
1515 * Fixed corner cases in conditional dynamic expansion.
1516 * Use InnoDB for MySQL IP Pools, to gain transactional support
1517 * Apply patch to libltdl for CVE-2009-3736.
1518 * Fixed a few issues found by LLVM's static checker
1519 * Keep track of "bad authenticators" for accounting packets
1520 * Keep track of "dropped packets" for auth/acct packets
1521 * Synced the "debian" directory with upstream
1522 * Made "unlang" use unsigned 32-bit integers, to match the
1525 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
1526 - Remove devel subpackage. It doesn't make much sense to have a devel package since
1527 we don't ship libraries and it produces multilib conflicts.
1529 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
1530 - more spec file clean up from review comments
1531 - remove freeradius-libs subpackage, move libfreeradius-eap and
1532 libfreeradius-radius into the main package
1533 - fix subpackage requires, change from freeradius-libs to main package
1534 - fix description of the devel subpackage, remove referene to non-shipped libs
1535 - remove execute permissions on src files included in debuginfo
1536 - remove unnecessary use of ldconfig
1537 - since all sub-packages now require main package remove user creation for sub-packages
1538 - also include the LGPL library license file in addition to the GPL license file
1539 - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6
1541 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
1542 - fix various rpmlint issues.
1544 * Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
1545 - rebuild against perl 5.10.1
1547 * Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
1548 - resolves: bug #522111 non-conformant initscript
1549 also change permission of /var/run/radiusd from 0700 to 0755
1550 so that "service radiusd status" can be run as non-root
1552 * Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
1553 - use password-auth common PAM configuration instead of system-auth
1555 * Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
1556 - enable building of the rlm_wimax module
1557 - pcap wire analysis support is enabled and available in utils subpackage
1558 - Resolves bug #523053 radtest manpage in wrong package
1559 - update to latest upstream release, from upstream Changelog:
1560 Feature improvements
1561 * Full support for CoA and Disconnect packets as per RFC 3576
1562 and RFC 5176. Both receiving and proxying CoA is supported.
1563 * Added "src_ipaddr" configuration to "home_server". See
1564 proxy.conf for details.
1565 * radsniff now accepts -I, to read from a filename instead of
1567 * radsniff also prints matching requests and any responses to those
1568 requests when '-r' is used.
1569 * Added example of attr_filter for Access-Challenge packets
1570 * Added support for udpfromto in DHCP code
1571 * radmin can now selectively mark modules alive/dead.
1572 See "set module state".
1573 * Added customizable messages on login success/fail.
1574 See msg_goodpass && msg_badpass in log{} section of radiusd.conf
1575 * Document "chase_referrals" and "rebind" in raddb/modules/ldap
1576 * Preliminary implementation of DHCP relay.
1577 * Made thread pool section optional. If it doesn't exist,
1578 the server will run single-threaded.
1579 * Added sample radrelay.conf for people upgrading from 1.x
1580 * Made proxying more stable by failing over, rather than
1581 rejecting the first request. See "response_window" in proxy.conf
1582 * Allow home_server_pools to exist without realms.
1583 * Add dictionary.iea (closes bug #7)
1584 * Added support for RFC 5580
1585 * Added experimental sql_freetds module from Gabriel Blanchard.
1586 * Updated dictionary.foundry
1587 * Added sample configuration for MySQL cluster in raddb/sql/ndb
1588 See the README file for explanations.
1590 * Fixed corner case where proxied packets could have extra
1591 character in User-Password attribute. Fix from Niko Tyni.
1592 * Extended size of "attribute" field in SQL to 64.
1593 * Fixes to ruby module to be more careful about when it builds.
1594 * Updated Perl module "configure" script to check for broken
1596 * Fix "status_check = none". It would still send packets
1598 * Set recursive flag on the proxy mutex, which enables safer
1599 cleanup on some platforms.
1600 * Copy the EAP username verbatim, rather than escaping it.
1601 * Update handling so that robust-proxy-accounting works when
1602 all home servers are down for extended periods of time.
1603 * Look for DHCP option 53 anywhere in the packet, not just
1605 * Fix processing of proxy fail handler with virtual servers.
1606 * DHCP code now prints out correct src/dst IP addresses
1607 when sending packets.
1608 * Removed requirement for DHCP to have clients
1609 * Fixed handling of DHCP packets with message-type buried in the packet
1610 * Fixed corner case with negation in unlang.
1611 * Minor fixes to default MySQL & PostgreSQL schemas
1612 * Suppress MSCHAP complaints in debugging mode.
1613 * Fix SQL module for multiple instance, and possible crash on HUP
1614 * Fix permissions for radius.log for sites that change user/group,
1615 but which don't create the file before starting radiusd.
1616 * Fix double counting of packets when proxying
1618 * Fix pthread keys in rlm_perl
1619 * Log reasons for EAP failure (closes bug #8)
1620 * Load home servers and pools that aren't referenced from a realm.
1621 * Handle return codes from virtual attributes in "unlang"
1622 (e.g. LDAP-Group). This makes "!(expr)" work for them.
1623 * Enable VMPS to see contents of virtual server again
1624 * Fix WiMAX module to be consistent with examples. (closes bug #10)
1625 * Fixed crash with policies dependent on NAS-Port comparisons
1626 * Allowed vendor IDs to be be higher than 32767.
1627 * Fix crash on startup with certain regexes in "hints" file.
1628 * Fix crash in attr_filter module when packets don't exist
1629 * Allow detail file reader to be faster when "load_factor = 100"
1630 * Add work-around for build failures with errors related to
1631 lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
1632 * Made ldap module "rebind" option aware of older, incompatible
1633 versions of OpenLDAP.
1634 * Check value of Fall-Through in attr_filter module.
1636 * Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
1637 - rebuilt with new openssl
1639 * Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
1640 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
1642 * Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
1643 - install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
1645 * Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
1646 - resolves bug #507571 freeradius packages do not check for user/group existence
1648 * Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
1649 - make /etc/raddb/sites-available/* be config(noreplace)
1651 * Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
1652 - update to latest upstream release, from upstream Changelog:
1653 Feature improvements
1654 * radclient exits with 0 on successful (accept / ack), and 1
1655 otherwise (no response / reject)
1656 * Added support for %%{sql:UPDATE ..}, and insert/delete
1657 Patch from Arran Cudbard-Bell
1658 * Added sample "do not respond" policy. See raddb/policy.conf
1659 and raddb/sites-available/do_not_respond
1660 * Cleanups to Suse spec file from Norbert Wegener
1661 * New VSAs for Juniper from Bjorn Mork
1662 * Include more RFC dictionaries in the default install
1663 * More documentation for the WiMAX module
1664 * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
1665 This helps with Active Directory. See raddb/modules/ldap
1666 * Don't load pre/post-proxy if proxying is disabled.
1667 * Added %%{md5:...}, which returns MD5 hash in hex.
1668 * Added configurable "retry_interval" and "poll_interval"
1669 for "detail" listeners.
1670 * Added "delete_mppe_keys" configuration option to rlm_wimax.
1671 Apparently some WiMAX clients misbehave when they see those keys.
1672 * Added experimental rlm_ruby from
1673 http://github.com/Antti/freeradius-server/tree/master
1674 * Add Tunnel attributes to ldap.attrmap
1675 * Enable virtual servers to be reloaded on HUP. For now, only
1676 the "authorize", "authenticate", etc. processing sections are
1677 reloaded. Clients and "listen" sections are NOT reloaded.
1678 * Updated "radwatch" script to be more robust. See scripts/radwatch
1679 * Added certificate compatibility notes in raddb/certs/README,
1680 for compatibility with different operating systems. (i.e. Windows)
1681 * Permit multiple "-e" in radmin.
1682 * Add support for originating CoA-Request and Disconnect-Request.
1683 See raddb/sites-available/originate-coa.
1684 * Added "lifetime" and "max_queries" to raddb/sql.conf.
1685 This helps address the problem of hung SQL sockets.
1686 * Allow packets to be injected via radmin. See "inject help"
1688 * Answer VMPS reconfirmation request. Patch from Hermann Lauer.
1689 * Sample logrotate script in scripts/logrotate.freeradius
1690 * Add configurable poll interval for "detail" listeners
1691 * New "raddebug" command. This prints debugging information from
1692 a running server. See "man raddebug.
1693 * Add "require_message_authenticator" configuration to home_server
1694 configuration. This makes the server add Message-Authenticator
1695 to all outgoing Access-Request packets.
1696 * Added smsotp module, as contributed by Siemens.
1697 * Enabled the administration socket in the default install.
1698 See raddb/sites-available/control-socket, and "man radmin"
1699 * Handle duplicate clients, such as with replicated or
1700 load-balanced SQL servers and "readclients = yes"
1702 * Minor changes to allow building without VQP.
1703 * Minor fixes from John Center
1704 * Fixed raddebug example
1705 * Don't crash when deleting attributes via unlang
1706 * Be friendlier to very fast clients
1707 * Updated the "detail" listener so that it only polls once,
1708 and not many times in a row, leaking memory each time...
1709 * Update comparison for Packet-Src-IP-Address (etc.) so that
1710 the operators other than '==' work.
1711 * Did autoconf magic to work around weird libtool bug
1712 * Make rlm_perl keep tags for tagged attributes in more situations
1713 * Update UID checking for radmin
1714 * Added "include_length" field for TTLS. It's needed for RFC
1715 compliance, but not (apparently) for interoperability.
1716 * Clean up control sockets when they are closed, so that we don't
1718 * Define SUN_LEN for systems that don't have it.
1719 * Correct some boundary conditions in the conditional checker ("if")
1720 in "unlang". Bug noted by Arran Cudbard-Bell.
1721 * Work around minor building issues in gmake. This should only
1722 have affected developers.
1723 * Change how we manage unprivileged user/group, so that we do not
1724 create control sockets owned by root.
1725 * Fixed more minor issues found by Coverity.
1726 * Allow raddb/certs/bootstrap to run when there is no "make"
1728 * In radiusd.conf, run_dir depends on the name of the program,
1729 and isn't hard-coded to "..../radiusd"
1730 * Check for EOF in more places in the "detail" file reader.
1731 * Added Freeswitch dictionary.
1732 * Chop ethernet frames in VMPS, rather than droppping packets.
1733 * Fix EAP-TLS bug. Patch from Arnaud Ebalard
1734 * Don't lose string for regex-compares in the "users" file.
1735 * Expose more functions in rlm_sql to rlm_sqlippool, which
1736 helps on systems where RTLD_GLOBAL is off.
1737 * Fix typos in MySQL schemas for ippools.
1738 * Remove macro that was causing build issues on some platforms.
1739 * Fixed issues with dead home servers. Bug noted by Chris Moules.
1740 * Fixed "access after free" with some dynamic clients.
1742 - fix packaging bug, some directories missing execute permission
1743 /etc/raddb/dictionary now readable by all.
1745 * Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
1746 - fix type usage in unixodbc to match new type usage in unixodbc API
1748 * Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
1749 - add pointer to Red Hat documentation in docdir
1751 * Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
1752 - rebuild for dependencies
1754 * Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
1755 - upgrade to latest upstream release, upstream summary follows:
1756 The focus of this release is stability.
1757 Feature Improvements:
1758 * Allow running with "user=radiusd" and binding to secure sockets.
1759 * Start sending Status-Server "are you alive" messages earlier, which
1760 helps with proxying multiple realms to a home server.
1761 * Removed thread pool code from rlm_perl. It's not necessary.
1762 * Added example Perl configuration to raddb/modules/perl
1763 * Force OpenSSL to support certificates with SHA256. This seems to be
1764 necessary for WiMAX certs.
1766 * Fix Debian patch to allow it to build.
1767 * Fix potential NULL dereference in debugging mode on certain
1768 platforms for TTLS and PEAP inner tunnels.
1769 * Fix uninitialized memory in handling of vendor definitions
1770 * Fix parsing of quoted (but non-string) attributes in the "users" file.
1771 * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
1772 * use SUN_LEN in control socket, to avoid truncation on some platforms.
1773 * Correct internal handling of "debug condition" to prevent it from
1775 * Check return code of regcomp in "unlang", so that invalid regular
1776 expressions are caught rather than mishandled.
1777 * Make rlm_sql use <ltdl.h>. Addresses bug #610.
1778 * Document list "type = status" better. Closes bug #580.
1779 * Set "default days" for certificates, because OpenSSL won't do it.
1780 This closes bug #615.
1781 * Reference correct list in example raddb/modules/ldap. Closes #596.
1782 * Increase default schema size for Acct-Session-Id to 64. Closes #540.
1783 * Fix use of temporary files in dialup-admin. Closes #605 and
1784 addresses CVE-2008-4474.
1785 * Addressed a number of minor issues found by Coverity.
1786 * Added DHCP option 150 to the dictionary. Closes #618.
1788 * Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
1789 - add --with-system-libtool to configure as a workaround for
1790 undefined reference to lt__PROGRAM__LTX_preloaded_symbols
1792 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1793 - add obsoletes tag for dialupadmin subpackages which were removed
1795 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1796 - add readline-devel BuildRequires
1798 * Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
1799 - Rebuild for Python 2.6
1801 * Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
1802 - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
1803 - remove diaupadmin packages, it's not well supported and there are problems with it.
1805 * Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1806 - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
1807 permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770
1809 * Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1810 - upgrade to new upstream 2.1.1 release
1812 * Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
1813 - Resolves: bug #453761: FreeRADIUS %%post should not include chown -R
1814 specify file attributes for /etc/raddb/ldap.attrmap
1815 fix consistent use of tabs/spaces (rpmlint warning)
1817 * Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
1818 - upgrade to latest upstream, see Changelog for details,
1819 upstream now has more complete fix for bug #447545, local patch removed
1821 * Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
1822 - upgrade to latest upstream, see Changelog for details
1823 - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel
1825 * Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
1826 - # Temporary fix for bug #446864, turn off optimization
1828 * Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
1829 - remove support for radrelay, it's different now
1830 - turn off default inclusion of SQL config files in radiusd.conf since SQL
1831 is an optional RPM install
1832 - remove mssql config files
1834 * Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
1835 - Upgrade to current upstream 2.0.3 release
1836 - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
1837 - Resolve: bug #438665: Contains files owned by buildsystem
1838 - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
1839 to further partition external dependencies.
1840 - Clean up some unnecessary requires dependencies
1841 - Add versioned requires between subpackages
1843 * Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
1844 - add Requires for versioned perl (libperl.so)
1846 * Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
1847 - upgrade to new 2.0 release
1848 - split into subpackages for more fine grained installation
1850 * Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
1851 - Autorebuild for GCC 4.3
1853 * Thu Dec 06 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
1856 * Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
1857 - add support in rlm_ldap for reading clients from ldap
1858 - fix TLS parameter controling if a cert which fails to validate
1859 will be accepted (i.e. self-signed),
1860 rlm_ldap config parameter=tls_require_cert
1861 ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
1862 ldap_set_option() when it should have been ldap_int_tls_config()
1864 * Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
1865 - add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
1867 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
1868 - made init script fully lsb conform
1870 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
1871 - fixed initscript problem (rhbz#292521)
1873 * Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
1874 - fixed initscript for LSB (rhbz#243671, rhbz#243928)
1877 * Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
1879 - install snmp MIB files
1880 - dropped LDAP_DEPRECATED flag, it is upstream
1881 - marked config files for sub packages as config (rhbz#240400)
1882 - moved db files to /var/lib/raddb (rhbz#199082)
1884 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
1885 - radiusd expects /etc/raddb to not be world readable or writable
1886 /etc/raddb now belongs to radiusd, post script sets permissions
1888 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
1891 * Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
1893 - no /etc/raddb/otppasswd.sample anymore
1894 - build is pie by default, dropped pie patch
1895 - fixed build requirement for perl (perl-devel)
1897 * Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
1898 - remove trailing dot from summary
1900 - fix post/postun/preun requirements
1903 * Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
1904 - rebuild for new postgresql library version
1906 * Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
1907 - fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
1910 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
1911 - new version 1.1.3 with lots of upstream bug fixes, some security fixes
1914 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
1915 - commented out include for sql.conf in radiusd.conf (#202561)
1917 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
1920 * Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
1923 * Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
1925 - fixed incorrect rlm_sql globbing (#189095)
1926 Thanks to Yanko Kaneti for the fix.
1927 - fixed chown syntax in post script (#182777)
1928 - dropped gcc34, libdir and realloc-return patch
1929 - spec file cleanup with additional libtool build fixes
1931 * Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
1932 - bump again for double-long bug on ppc(64)
1934 * Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
1935 - rebuilt for new gcc4.1 snapshot and glibc changes
1937 * Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
1940 * Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
1943 * Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
1944 - Rebuild due to mysql update.
1946 * Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
1947 - rebuilt with new openssl
1948 - fixed ignored return value of realloc
1950 * Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
1951 - use include instead of pam_stack in pam config
1953 * Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
1954 - added missing build requires for libtool-ltdl-devel (#160877)
1955 - modified file list to get a report for missing plugins
1957 * Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
1959 - droppend radrelay patch (fixed upstream)
1961 * Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
1962 - rebuild against new postgresql-libs
1964 * Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
1967 * Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
1968 - rebuild for MySQL 4
1969 - switched over to installed libtool
1971 * Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
1972 - Fixed install problem of radeapclient (#138069)
1974 * Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
1976 - applied radrelay CVS patch from Kevin Bonner
1978 * Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
1979 - BuildRequires pam-devel and libtool
1980 - Fix errant text in description
1981 - Other minor cleanups
1983 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
1984 - renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
1985 configuration (#130613)
1987 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
1988 - fixed BuildRequires for openssl-devel (#130606)
1990 * Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
1993 * Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
1994 - added buildrequires for zlib-devel (#127162)
1995 - fixed libdir patch to prefer own libeap instead of installed one (#127168)
1996 - fixed samba account maps in LDAP for samba v3 (#127173)
1998 * Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
1999 - third "pre" release of version 1.0.0
2000 - rlm_ldap is using SASLv2 (#126507)
2002 * Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
2005 * Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
2006 - fixed BuildRequires for gdbm-devel
2008 * Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
2009 - gcc34 compilation fixes
2011 * Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
2014 * Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
2015 - added sql scripts for rlm_sql to documentation (#116435)
2017 * Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
2020 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
2021 - using -fPIC instead of -fpic for s390 ans s390x
2023 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
2024 - radiusd is pie, now
2026 * Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
2027 - new version 0.9.3 (bugfix release)
2029 * Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
2032 * Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
2035 * Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
2036 - modify default PAM configuration to remove the directory part of the module
2037 name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
2038 multilib systems will always load the right module for the architecture
2039 - modify default PAM configuration to use pam_stack
2041 * Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
2042 - com_err.h moved to /usr/include/et
2044 * Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
2047 * Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
2048 - new version 0.9.0 pre3
2050 * Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
2051 - included directory /var/log/radius/radacct for logrotate
2053 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
2054 - moved log and run dir to files section, cleaned up post
2056 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
2057 - added missing run dir in post
2059 * Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
2060 - fixed module load patch
2062 * Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
2063 - removed la files, removed devel package
2064 - split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
2066 - fixed requires and buildrequires
2067 - create logging dir in post if it does not exist
2068 - fixed module load without la files
2070 * Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>