2 # Configuration for the SQL module, when using MSSQL.
4 # The database schema is available at:
6 # doc/examples/mssql.sql
13 # Current supported are: rlm_sql_mysql, rlm_sql_postgresql,
14 # rlm_sql_iodbc, rlm_sql_oracle, rlm_sql_unixodbc
15 driver = "rlm_sql_unixodbc"
22 # Database table configuration
25 # If you want both stop and start records logged to the
26 # same SQL table, leave this as is. If you want them in
27 # different tables, put the start table in acct_table1
28 # and stop table in acct_table2
29 acct_table1 = "radacct"
30 acct_table2 = "radacct"
32 authcheck_table = "radcheck"
33 authreply_table = "radreply"
35 groupcheck_table = "radgroupcheck"
36 groupreply_table = "radgroupreply"
38 usergroup_table = "usergroup"
40 # Remove stale session if checkrad does not see a double login
41 deletestalesessions = yes
43 # Print all SQL statements when in debug mode (-x)
45 sqltracefile = ${logdir}/sqltrace.sql
47 # number of sql connections to make to server
50 # Safe characters list for sql queries. Everything else is replaced
51 # with their mime-encoded equivalents.
52 # The default list should be ok
53 #safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
55 #######################################################################
56 # Query config: Username
57 #######################################################################
58 # This is the username that will get substituted, escaped, and added
59 # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used
60 # below everywhere a username substitution is needed so you you can
61 # be sure the username passed from the client is escaped properly.
63 # Uncomment the next line, if you want the sql_user_name to mean:
65 # Use Stripped-User-Name, if it's there.
66 # Else use User-Name, if it's there,
67 # Else use hard-coded string "none" as the user name.
68 #sql_user_name = "%{Stripped-User-Name:-%{User-Name:-none}}"
70 sql_user_name = "%{User-Name}"
73 #######################################################################
74 # Authorization Queries
75 #######################################################################
76 # These queries compare the check items for the user
77 # in ${authcheck_table} and setup the reply items in
78 # ${authreply_table}. You can use any query/tables
79 # you want, but the return data for each row MUST
80 # be in the following order:
82 # 0. Row ID (currently unused)
83 # 1. UserName/GroupName
86 # 4. Item Attr Operation
87 #######################################################################
88 # Query for case sensitive usernames was removed. Please contact with me,
89 # if you know analog of STRCMP functions for MS SQL.
91 authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
92 authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
94 authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
95 authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
98 #######################################################################
100 #######################################################################
101 # accounting_onoff_query - query for Accounting On/Off packets
102 # accounting_update_query - query for Accounting update packets
103 # accounting_update_query_alt - query for Accounting update packets
104 # (alternate in case first query fails)
105 # accounting_start_query - query for Accounting start packets
106 # accounting_start_query_alt - query for Accounting start packets
107 # (alternate in case first query fails)
108 # accounting_stop_query - query for Accounting stop packets
109 # accounting_stop_query_alt - query for Accounting start packets
110 # (alternate in case first query doesn't
111 # affect any existing rows in the table)
112 #######################################################################
113 accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
115 accounting_update_query = "UPDATE ${acct_table1} SET FramedIPAddress = '%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStopTime = 0"
117 accounting_update_query_alt = "INSERT into ${acct_table1} (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
119 # accounting_start_query: Inserting of RadAcctId and AcctStopTime was
120 # removed. These fields are processing by a database
121 accounting_start_query = "INSERT into ${acct_table1} (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
123 accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
125 accounting_stop_query = "UPDATE ${acct_table2} SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
127 # accounting_stop_query_alt: Inserting of RadAcctId and AcctStartTime was
128 # removed. These fields are processing by a database
129 accounting_stop_query_alt = "INSERT into ${acct_table2} (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"