2 ## radiusd.conf -- FreeRADIUS server configuration file.
4 ## http://www.freeradius.org/
8 # The location of other config files and
9 # logfiles are declared in this file
11 # Also general configuration for modules can be done
12 # in this file, it is exported through the API to
13 # modules that ask for it.
15 # The configuration variables defined here are of the form ${foo}
16 # They are local to this file, and do not change from request to
19 # The per-request variables are of the form %{Attribute-Name}, and
20 # are taken from the values of the attribute in the incoming
21 # request. See 'doc/variables.txt' for more information.
24 exec_prefix = @exec_prefix@
25 sysconfdir = @sysconfdir@
26 localstatedir = @localstatedir@
30 radacctdir = @radacctdir@
32 # Location of config and logfiles.
34 run_dir = ${localstatedir}/run/radiusd
37 # The logging messages for the server are appended to the
40 log_file = ${logdir}/radius.log
43 # libdir: Where to find the rlm_* modules.
45 # This should be automatically set at configuration time.
47 # If the server builds and installs, but fails at execution time
48 # with an 'undefined symbol' error, then you can use the libdir
49 # directive to work around the problem.
51 # The cause is usually that a library has been installed on your
52 # system in a place where the dynamic linker CANNOT find it. When
53 # executing as root (or another user), your personal environment MAY
54 # be set up to allow the dynamic linker to find the library. When
55 # executing as a daemon, FreeRADIUS MAY NOT have the same
56 # personalized configuration.
58 # To work around the problem, find out which library contains that symbol,
59 # and add the directory containing that library to the end of 'libdir',
60 # with a colon separating the directory names. NO spaces are allowed.
62 # e.g. libdir = /usr/local/lib:/opt/package/lib
64 # You can also try setting the LD_LIBRARY_PATH environment variable
65 # in a script which starts the server.
67 # If that does not work, then you can re-configure and re-build the
68 # server to NOT use shared libraries, via:
70 # ./configure --disable-shared
76 # pidfile: Where to place the PID of the RADIUS server.
78 # The server may be signalled while it's running by using this
81 # This file is written when ONLY running in daemon mode.
83 # e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid`
85 pidfile = ${run_dir}/radiusd.pid
88 # user/group: The name (or #number) of the user/group to run radiusd as.
90 # If these are commented out, the server will run as the user/group
91 # that started it. In order to change to a different user/group, you
92 # MUST be root ( or have root privleges ) to start the server.
94 # We STRONGLY recommend that you run the server with as few permissions
95 # as possible. That is, if you're not using shadow passwords, the
96 # user and group items below should be set to 'nobody'.
98 # On SCO (ODT 3) use "user = nouser" and "group = nogroup".
100 # NOTE that some kernels refuse to setgid(group) when the value of
101 # (unsigned)group is above 60000; don't use group nobody on these systems!
103 # On systems with shadow passwords, you might have to set 'group = shadow'
104 # for the server to be able to read the shadow password file. If you can
105 # authenticate users while in debug mode, but not in daemon mode, it may be
106 # that the debugging mode server is running as a user that can read the
107 # shadow info, and the user listed below can not.
112 # max_request_time: The maximum time (in seconds) to handle a request.
114 # Requests which take more time than this to process may be killed, and
115 # a REJECT message is returned.
117 # WARNING: If you notice that requests take a long time to be handled,
118 # then this MAY INDICATE a bug in the server, in one of the modules
119 # used to handle a request, OR in your local configuration.
121 # This problem is most often seen when using an SQL database. If it takes
122 # more than a second or two to receive an answer from the SQL database,
123 # then it probably means that you haven't indexed the database. See your
124 # SQL server documentation for more information.
126 # Useful range of values: 5 to 120
128 max_request_time = 30
130 # delete_blocked_requests: If the request takes MORE THAN 'max_request_time'
131 # to be handled, then maybe the server should delete it.
133 # If you're running in threaded, or thread pool mode, this setting
134 # should probably be 'no'. Setting it to 'yes' when using a threaded
135 # server MAY cause the server to crash!
137 delete_blocked_requests = no
139 # cleanup_delay: The time to wait (in seconds) before cleaning up
140 # a reply which was sent to the NAS.
142 # The RADIUS request is normally cached internally for a short period
143 # of time, after the reply is sent to the NAS. The reply packet may be
144 # lost in the network, and the NAS will not see it. The NAS will then
145 # re-send the request, and the server will respond quickly with the
148 # If this value is set too low, then duplicate requests from the NAS
149 # MAY NOT be detected, and will instead be handled as seperate requests.
151 # If this value is set too high, then the server will cache too many
152 # requests, and some new requests may get blocked. (See 'max_requests'.)
154 # Useful range of values: 2 to 10
158 # max_requests: The maximum number of requests which the server keeps
159 # track of. This should be 256 multiplied by the number of clients.
160 # e.g. With 4 clients, this number should be 1024.
162 # If this number is too low, then when the server becomes busy,
163 # it will not respond to any new requests, until the 'cleanup_delay'
164 # time has passed, and it has removed the old requests.
166 # If this number is set too high, then the server will use a bit more
167 # memory for no real benefit.
169 # If you aren't sure what it should be set to, it's better to set it
170 # too high than too low. Setting it to 1000 per client is probably
171 # the highest it should be.
173 # Useful range of values: 256 to infinity
177 # bind_address: Make the server listen on a particular IP address, and
178 # send replies out from that address. This directive is most useful
179 # for machines with multiple IP addresses on one interface.
181 # It can either contain "*", or an IP address, or a fully qualified
182 # Internet domain name. The default is "*"
184 # As of 1.0, you can also use the "listen" directive. See below for
189 # port: Allows you to bind FreeRADIUS to a specific port.
191 # The default port that most NAS boxes use is 1645, which is historical.
192 # RFC 2138 defines 1812 to be the new port. Many new servers and
193 # NAS boxes use 1812, which can create interoperability problems.
195 # The port is defined here to be 0 so that the server will pick up
196 # the machine's local configuration for the radius port, as defined
199 # If you want to use the default RADIUS port as defined on your server,
200 # (usually through 'grep radius /etc/services') set this to 0 (zero).
202 # A port given on the command-line via '-p' over-rides this one.
204 # As of 1.0, you can also use the "listen" directive. See below for
210 # By default, the server uses "bind_address" to listen to all IP's
211 # on a machine, or just one IP. The "port" configuration is used
212 # to select the authentication port used when listening on those
215 # If you want the server to listen on additional addresses, you can
216 # use the "listen" section. A sample section (commented out) is included
217 # below. This "listen" section duplicates the functionality of the
218 # "bind_address" and "port" configuration entries, but it only listens
219 # for authentication packets.
221 # If you comment out the "bind_address" and "port" configuration entries,
222 # then it becomes possible to make the server accept only accounting,
223 # or authentication packets. Previously, it always listened for both
224 # types of packets, and it was impossible to make it listen for only
225 # one type of packet.
228 # IP address on which to listen.
229 # Allowed values are:
230 # dotted quad (1.2.3.4)
231 # hostname (radius.example.com)
235 # Port on which to listen.
236 # Allowed values are:
237 # integer port number (1812)
238 # 0 means "use /etc/services for the proper port"
241 # Type of packets to listen for.
242 # Allowed values are:
243 # auth listen for authentication packets
244 # acct listen for accounting packets
250 # hostname_lookups: Log the names of clients or just their IP addresses
251 # e.g., www.freeradius.org (on) or 206.47.27.232 (off).
253 # The default is 'off' because it would be overall better for the net
254 # if people had to knowingly turn this feature on, since enabling it
255 # means that each client request will result in AT LEAST one lookup
256 # request to the nameserver. Enabling hostname_lookups will also
257 # mean that your server may stop randomly for 30 seconds from time
258 # to time, if the DNS requests take too long.
260 # Turning hostname lookups off also means that the server won't block
261 # for 30 seconds, if it sees an IP address which has no name associated
264 # allowed values: {no, yes}
266 hostname_lookups = no
268 # Core dumps are a bad thing. This should only be set to 'yes'
269 # if you're debugging a problem with the server.
271 # allowed values: {no, yes}
273 allow_core_dumps = no
275 # Regular expressions
277 # These items are set at configure time. If they're set to "yes",
278 # then setting them to "no" turns off regular expression support.
280 # If they're set to "no" at configure time, then setting them to "yes"
281 # WILL NOT WORK. It will give you an error.
283 regular_expressions = @REGEX@
284 extended_expressions = @REGEX_EXTENDED@
286 # Log the full User-Name attribute, as it was found in the request.
288 # allowed values: {no, yes}
290 log_stripped_names = no
292 # Log authentication requests to the log file.
294 # allowed values: {no, yes}
298 # Log passwords with the authentication requests.
299 # log_auth_badpass - logs password if it's rejected
300 # log_auth_goodpass - logs password if it's correct
302 # allowed values: {no, yes}
304 log_auth_badpass = no
305 log_auth_goodpass = no
307 # usercollide: Turn "username collision" code on and off. See the
308 # "doc/duplicate-users" file
311 # !!!!!!! Setting this to "yes" may result in the server behaving
312 # !!!!!!! strangely. The "username collision" code will ONLY work
313 # !!!!!!! with clear-text passwords. Even then, it may not do what
314 # !!!!!!! you want, or what you expect.
316 # !!!!!!! We STRONGLY RECOMMEND that you do not use this feature,
317 # !!!!!!! and that you find another way of acheiving the same goal.
319 # !!!!!!! e,g. module fail-over. See 'doc/configurable_failover'
324 # lower_user / lower_pass:
325 # Lower case the username/password "before" or "after"
326 # attempting to authenticate.
328 # If "before", the server will first modify the request and then try
329 # to auth the user. If "after", the server will first auth using the
330 # values provided by the user. If that fails it will reprocess the
331 # request after modifying it as you specify below.
333 # This is as close as we can get to case insensitivity. It is the
334 # admin's job to ensure that the username on the auth db side is
335 # *also* lowercase to make this work
337 # Default is 'no' (don't lowercase values)
338 # Valid values = "before" / "after" / "no"
343 # nospace_user / nospace_pass:
345 # Some users like to enter spaces in their username or password
346 # incorrectly. To save yourself the tech support call, you can
347 # eliminate those spaces here:
349 # Default is 'no' (don't remove spaces)
350 # Valid values = "before" / "after" / "no" (explanation above)
355 # The program to execute to do concurrency checks.
356 checkrad = ${sbindir}/checkrad
358 # SECURITY CONFIGURATION
360 # There may be multiple methods of attacking on the server. This
361 # section holds the configuration items which minimize the impact
366 # max_attributes: The maximum number of attributes
367 # permitted in a RADIUS packet. Packets which have MORE
368 # than this number of attributes in them will be dropped.
370 # If this number is set too low, then no RADIUS packets
373 # If this number is set too high, then an attacker may be
374 # able to send a small number of packets which will cause
375 # the server to use all available memory on the machine.
377 # Setting this number to 0 means "allow any number of attributes"
381 # reject_delay: When sending an Access-Reject, it can be
382 # delayed for a few seconds. This may help slow down a DoS
383 # attack. It also helps to slow down people trying to brute-force
384 # crack a users password.
386 # Setting this number to 0 means "send rejects immediately"
388 # If this number is set higher than 'cleanup_delay', then the
389 # rejects will be sent at 'cleanup_delay' time, when the request
390 # is deleted from the internal cache of requests.
392 # Useful ranges: 1 to 5
396 # status_server: Whether or not the server will respond
397 # to Status-Server requests.
399 # Normally this should be set to "no", because they're useless.
400 # See: http://www.freeradius.org/rfc/rfc2865.html#Keep-Alives
402 # However, certain NAS boxes may require them.
404 # When sent a Status-Server message, the server responds with
405 # an Access-Accept packet, containing a Reply-Message attribute,
406 # which is a string describing how long the server has been
412 # PROXY CONFIGURATION
414 # proxy_requests: Turns proxying of RADIUS requests on or off.
416 # The server has proxying turned on by default. If your system is NOT
417 # set up to proxy requests to another server, then you can turn proxying
418 # off here. This will save a small amount of resources on the server.
420 # If you have proxying turned off, and your configuration files say
421 # to proxy a request, then an error message will be logged.
423 # To disable proxying, change the "yes" to "no", and comment the
426 # allowed values: {no, yes}
429 $INCLUDE ${confdir}/proxy.conf
432 # CLIENTS CONFIGURATION
434 # Client configuration is defined in "clients.conf".
437 # The 'clients.conf' file contains all of the information from the old
438 # 'clients' and 'naslist' configuration files. We recommend that you
439 # do NOT use 'client's or 'naslist', although they are still
442 # Anything listed in 'clients.conf' will take precedence over the
443 # information from the old-style configuration files.
445 $INCLUDE ${confdir}/clients.conf
450 # Snmp configuration is only valid if SNMP support was enabled
453 # To enable SNMP querying of the server, set the value of the
454 # 'snmp' attribute to 'yes'
457 $INCLUDE ${confdir}/snmp.conf
460 # THREAD POOL CONFIGURATION
462 # The thread pool is a long-lived group of threads which
463 # take turns (round-robin) handling any incoming requests.
465 # You probably want to have a few spare threads around,
466 # so that high-load situations can be handled immediately. If you
467 # don't have any spare threads, then the request handling will
468 # be delayed while a new thread is created, and added to the pool.
470 # You probably don't want too many spare threads around,
471 # otherwise they'll be sitting there taking up resources, and
472 # not doing anything productive.
474 # The numbers given below should be adequate for most situations.
477 # Number of servers to start initially --- should be a reasonable
481 # Limit on the total number of servers running.
483 # If this limit is ever reached, clients will be LOCKED OUT, so it
484 # should NOT BE SET TOO LOW. It is intended mainly as a brake to
485 # keep a runaway server from taking the system with it as it spirals
488 # You may find that the server is regularly reaching the
489 # 'max_servers' number of threads, and that increasing
490 # 'max_servers' doesn't seem to make much difference.
492 # If this is the case, then the problem is MOST LIKELY that
493 # your back-end databases are taking too long to respond, and
494 # are preventing the server from responding in a timely manner.
496 # The solution is NOT do keep increasing the 'max_servers'
497 # value, but instead to fix the underlying cause of the
498 # problem: slow database, or 'hostname_lookups=yes'.
500 # For more information, see 'max_request_time', above.
504 # Server-pool size regulation. Rather than making you guess
505 # how many servers you need, FreeRADIUS dynamically adapts to
506 # the load it sees, that is, it tries to maintain enough
507 # servers to handle the current load, plus a few spare
508 # servers to handle transient load spikes.
510 # It does this by periodically checking how many servers are
511 # waiting for a request. If there are fewer than
512 # min_spare_servers, it creates a new spare. If there are
513 # more than max_spare_servers, some of the spares die off.
514 # The default values are probably OK for most sites.
516 min_spare_servers = 3
517 max_spare_servers = 10
519 # There may be memory leaks or resource allocation problems with
520 # the server. If so, set this value to 300 or so, so that the
521 # resources will be cleaned up periodically.
523 # This should only be necessary if there are serious bugs in the
524 # server which have not yet been fixed.
526 # '0' is a special value meaning 'infinity', or 'the servers never
528 max_requests_per_server = 0
531 # MODULE CONFIGURATION
533 # The names and configuration of each module is located in this section.
535 # After the modules are defined here, they may be referred to by name,
536 # in other sections of this configuration file.
540 # Each module has a configuration as follows:
542 # name [ instance ] {
543 # config_item = value
547 # The 'name' is used to load the 'rlm_name' library
548 # which implements the functionality of the module.
550 # The 'instance' is optional. To have two different instances
551 # of a module, it first must be referred to by 'name'.
552 # The different copies of the module are then created by
553 # inventing two 'instance' names, e.g. 'instance1' and 'instance2'
555 # The instance names can then be used in later configuration
556 # INSTEAD of the original 'name'. See the 'radutmp' configuration
557 # below for an example.
560 # PAP module to authenticate users based on their stored password
562 # Supports multiple encryption schemes
565 # md5: MD5 ecnryption
566 # sha1: SHA1 encryption.
569 encryption_scheme = crypt
574 # To authenticate requests containing a CHAP-Password attribute.
580 # Pluggable Authentication Modules
583 # http://www.kernel.org/pub/linux/libs/pam/index.html
585 # WARNING: On many systems, the system PAM libraries have
586 # memory leaks! We STRONGLY SUGGEST that you do not
587 # use PAM for authentication, due to those memory leaks.
591 # The name to use for PAM authentication.
592 # PAM looks in /etc/pam.d/${pam_auth_name}
593 # for it's configuration. See 'redhat/radiusd-pam'
594 # for a sample PAM configuration file.
596 # Note that any Pam-Auth attribute set in the 'authorize'
597 # section will over-ride this one.
602 # Unix /etc/passwd style authentication
606 # Cache /etc/passwd, /etc/shadow, and /etc/group
608 # The default is to NOT cache them.
610 # For FreeBSD and NetBSD, you do NOT want to enable
611 # the cache, as it's password lookups are done via a
612 # database, so set this value to 'no'.
614 # Some systems (e.g. RedHat Linux with pam_pwbd) can
615 # take *seconds* to check a password, when th passwd
616 # file containing 1000's of entries. For those systems,
617 # you should set the cache value to 'yes', and set
618 # the locations of the 'passwd', 'shadow', and 'group'
621 # allowed values: {no, yes}
624 # Reload the cache every 600 seconds (10mins). 0 to disable.
628 # Define the locations of the normal passwd, shadow, and
631 # 'shadow' is commented out by default, because not all
632 # systems have shadow passwords.
634 # To force the module to use the system password functions,
635 # instead of reading the files, leave the following entries
638 # This is required for some systems, like FreeBSD,
641 # passwd = /etc/passwd
642 # shadow = /etc/shadow
646 # The location of the "wtmp" file.
647 # This should be moved to it's own module soon.
649 # The only use for 'radlast'. If you don't use
650 # 'radlast', then you can comment out this item.
652 radwtmp = ${logdir}/radwtmp
655 # Extensible Authentication Protocol
657 # For all EAP related authentications.
658 # Now in another file, because it is very large.
660 $INCLUDE ${confdir}/eap.conf
662 # Microsoft CHAP authentication
664 # This module supports MS-CHAP and MS-CHAPv2 authentication.
665 # It also enforces the SMB-Account-Ctrl attribute.
669 # As of 0.9, the mschap module does NOT support
670 # reading from /etc/smbpasswd.
672 # If you are using /etc/smbpasswd, see the 'passwd'
673 # module for an example of how to use /etc/smbpasswd
675 # if use_mppe is not set to no mschap will
676 # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and
677 # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2
681 # if mppe is enabled require_encryption makes
682 # encryption moderate
684 #require_encryption = yes
686 # require_strong always requires 128 bit key
689 #require_strong = yes
691 # Windows sends us a username in the form of
692 # DOMAIN\user, but sends the challenge response
693 # based on only the user portion. This hack
694 # corrects for that incorrect behavior.
696 #with_ntdomain_hack = no
698 # The module can perform authentication itself, OR
699 # use a Windows Domain Controller. This configuration
700 # directive tells the module to call the ntlm_auth
701 # program, which will do the authentication, and return
702 # the NT-Key. Note that you MUST have "winbindd" and
703 # "nmbd" running on the local machine for ntlm_auth
704 # to work. See the ntlm_auth program documentation
707 # Be VERY careful when editing the following line!
709 #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
712 # Lightweight Directory Access Protocol (LDAP)
714 # This module definition allows you to use LDAP for
715 # authorization and authentication.
717 # See doc/rlm_ldap for description of configuration options
718 # and sample authorize{} and authenticate{} blocks
720 # However, LDAP can be used for authentication ONLY when the
721 # Access-Request packet contains a clear-text User-Password
722 # attribute. LDAP authentication will NOT work for any other
723 # authentication method.
725 # This means that LDAP servers don't understand EAP. If you
726 # force "Auth-Type = LDAP", and then send the server a
727 # request containing EAP authentication, then authentication
730 # The solution is to use the default configuration, which does
733 # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We
734 # really can't emphasize this enough.
737 server = "ldap.your.domain"
738 # identity = "cn=admin,o=My Org,c=UA"
740 basedn = "o=My Org,c=UA"
741 filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
742 # base_filter = "(objectclass=radiusprofile)"
744 # set this to 'yes' to use TLS encrypted connections
745 # to the LDAP database by using the StartTLS extended
747 # The StartTLS operation is supposed to be used with normal
748 # ldap connections instead of using ldaps (port 689) connections
751 # tls_cacertfile = /path/to/cacert.pem
752 # tls_cacertdir = /path/to/ca/dir/
753 # tls_certfile = /path/to/radius.crt
754 # tls_keyfile = /path/to/radius.key
755 # tls_randfile = /path/to/rnd
756 # tls_require_cert = "demand"
758 # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA"
759 # profile_attribute = "radiusProfileDn"
760 access_attr = "dialupAccess"
762 # Mapping of RADIUS dictionary attributes to LDAP
763 # directory attributes.
764 dictionary_mapping = ${raddbdir}/ldap.attrmap
766 ldap_connections_number = 5
769 # NOTICE: The password_header directive is NOT case insensitive
771 # password_header = "{clear}"
774 # password_attribute = nspmPassword
776 # to get the user's password from a Novell eDirectory
777 # backend. This will work *only if* freeRADIUS is
778 # configured to build with --with-edir option.
781 # The server can usually figure this out on its own, and pull
782 # the correct User-Password or NT-Password from the database.
784 # Note that NT-Passwords MUST be stored as a 32-digit hex
785 # string, and MUST start off with "0x", such as:
787 # 0x000102030405060708090a0b0c0d0e0f
789 # Without the leading "0x", NT-Passwords will not work.
790 # This goes for NT-Passwords stored in SQL, too.
792 # password_attribute = userPassword
794 # Un-comment the following to disable Novell eDirectory account
795 # policy check and intruder detection. This will work *only if*
796 # FreeRADIUS is configured to build with --with-edir option.
798 # edir_account_policy_check=no
800 # groupname_attribute = cn
801 # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
802 # groupmembership_attribute = radiusGroupName
806 # compare_check_items = yes
808 # access_attr_used_for_allow = yes
811 # By default, if the packet contains a User-Password,
812 # and no other module is configured to handle the
813 # authentication, the LDAP module sets itself to do
814 # LDAP bind for authentication.
816 # You can disable this behavior by setting the following
817 # configuration entry to "no".
819 # allowed values: {no, yes}
820 # set_auth_type = yes
823 # passwd module allows to do authorization via any passwd-like
824 # file and to extract any attributes from these modules
827 # filename - path to filename
828 # format - format for filename record. This parameters
829 # correlates record in the passwd file and RADIUS
832 # Field marked as '*' is key field. That is, the parameter
833 # with this name from the request is used to search for
834 # the record from passwd file
835 # Attribute marked as '=' is added to reply_itmes instead
836 # of default configure_itmes
837 # Attribute marked as '~' is added to request_items
839 # Field marked as ',' may contain a comma separated list
841 # authtype - if record found this Auth-Type is used to authenticate
843 # hashsize - hashtable size. If 0 or not specified records are not
844 # stored in memory and file is red on every request.
845 # allowmultiplekeys - if few records for every key are allowed
846 # ignorenislike - ignore NIS-related records
847 # delimiter - symbol to use as a field separator in passwd file,
848 # for format ':' symbol is always used. '\0', '\n' are
852 # An example configuration for using /etc/smbpasswd.
854 #passwd etc_smbpasswd {
855 # filename = /etc/smbpasswd
856 # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::"
860 # allowmultiplekeys = no
863 # Similar configuration, for the /etc/group file. Adds a Group-Name
864 # attribute for every group that the user is member of.
867 # filename = /etc/group
868 # format = "=Group-Name:::*,User-Name"
870 # ignorenislike = yes
871 # allowmultiplekeys = yes
875 # Realm module, for proxying.
877 # You can have multiple instances of the realm module to
878 # support multiple realm syntaxs at the same time. The
879 # search order is defined by the order in the authorize and
882 # Four config options:
883 # format - must be 'prefix' or 'suffix'
884 # delimiter - must be a single character
885 # ignore_default - set to 'yes' or 'no'
886 # ignore_null - set to 'yes' or 'no'
888 # ignore_default and ignore_null can be set to 'yes' to prevent
889 # the module from matching against DEFAULT or NULL realms. This
890 # may be useful if you have have multiple instances of the
893 # They both default to 'no'.
898 # Using this entry, IPASS users have their realm set to "IPASS".
934 # A simple value checking module
936 # It can be used to check if an attribute value in the request
937 # matches a (possibly multi valued) attribute in the check
938 # items This can be used for example for caller-id
939 # authentication. For the module to run, both the request
940 # attribute and the check items attribute must exist
943 # A user has an ldap entry with 2 radiusCallingStationId
944 # attributes with values "12345678" and "12345679". If we
945 # enable rlm_checkval, then any request which contains a
946 # Calling-Station-Id with one of those two values will be
947 # accepted. Requests with other values for
948 # Calling-Station-Id will be rejected.
950 # Regular expressions in the check attribute value are allowed
951 # as long as the operator is '=~'
954 # The attribute to look for in the request
955 item-name = Calling-Station-Id
957 # The attribute to look for in check items. Can be multi valued
958 check-name = Calling-Station-Id
960 # The data type. Can be
961 # string,integer,ipaddr,date,abinary,octets
964 # If set to yes and we dont find the item-name attribute in the
965 # request then we send back a reject
967 #notfound-reject = no
970 # rewrite arbitrary packets. Useful in accounting and authorization.
973 # The module can also use the Rewrite-Rule attribute. If it
974 # is set and matches the name of the module instance, then
975 # that module instance will be the only one which runs.
977 # Also if new_attribute is set to yes then a new attribute
978 # will be created containing the value replacewith and it
979 # will be added to searchin (packet, reply, proxy, proxy_reply or config).
980 # searchfor,ignore_case and max_matches will be ignored in that case.
982 # Backreferences are supported: %{0} will contain the string the whole match
983 # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses
985 # If max_matches is greater than one the backreferences will correspond to the
989 #attr_rewrite sanecallerid {
990 # attribute = Called-Station-Id
991 # may be "packet", "reply", "proxy", "proxy_reply" or "config"
998 # ## If set to yes then the replace string will be appended to the original string
1002 # Preprocess the incoming RADIUS request, before handing it off
1005 # This module processes the 'huntgroups' and 'hints' files.
1006 # In addition, it re-writes some weird attributes created
1007 # by some NASes, and converts the attributes into a form which
1008 # is a little more standard.
1011 huntgroups = ${confdir}/huntgroups
1012 hints = ${confdir}/hints
1014 # This hack changes Ascend's wierd port numberings
1015 # to standard 0-??? port numbers so that the "+" works
1016 # for IP address assignments.
1017 with_ascend_hack = no
1018 ascend_channels_per_line = 23
1020 # Windows NT machines often authenticate themselves as
1021 # NT_DOMAIN\username
1023 # If this is set to 'yes', then the NT_DOMAIN portion
1024 # of the user-name is silently discarded.
1026 # This configuration entry SHOULD NOT be used.
1027 # See the "realms" module for a better way to handle
1029 with_ntdomain_hack = no
1031 # Specialix Jetstream 8500 24 port access server.
1033 # If the user name is 10 characters or longer, a "/"
1034 # and the excess characters after the 10th are
1035 # appended to the user name.
1037 # If you're not running that NAS, you don't need
1039 with_specialix_jetstream_hack = no
1041 # Cisco (and Quintum in Cisco mode) sends it's VSA attributes
1042 # with the attribute name *again* in the string, like:
1044 # H323-Attribute = "h323-attribute=value".
1046 # If this configuration item is set to 'yes', then
1047 # the redundant data in the the attribute text is stripped
1048 # out. The result is:
1050 # H323-Attribute = "value"
1052 # If you're not running a Cisco or Quintum NAS, you don't
1054 with_cisco_vsa_hack = no
1057 # Livingston-style 'users' file
1060 usersfile = ${confdir}/users
1061 acctusersfile = ${confdir}/acct_users
1062 preproxy_usersfile = ${confdir}/preproxy_users
1064 # If you want to use the old Cistron 'users' file
1065 # with FreeRADIUS, you should change the next line
1066 # to 'compat = cistron'. You can the copy your 'users'
1067 # file from Cistron.
1071 # Write a detailed log of all accounting records received.
1074 # Note that we do NOT use NAS-IP-Address here, as
1075 # that attribute MAY BE from the originating NAS, and
1076 # NOT from the proxy which actually sent us the
1077 # request. The Client-IP-Address attribute is ALWAYS
1078 # the address of the client which sent us the
1081 # The following line creates a new detail file for
1082 # every radius client (by IP address or hostname).
1083 # In addition, a new detail file is created every
1084 # day, so that the detail file doesn't have to go
1085 # through a 'log rotation'
1087 # If your detail files are large, you may also want
1088 # to add a ':%H' (see doc/variables.txt) to the end
1089 # of it, to create a new detail file every hour, e.g.:
1091 # ..../detail-%Y%m%d:%H
1093 # This will create a new detail file for every hour.
1095 detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
1098 # The Unix-style permissions on the 'detail' file.
1100 # The detail file often contains secret or private
1101 # information about users. So by keeping the file
1102 # permissions restrictive, we can prevent unwanted
1103 # people from seeing that information.
1107 # Certain attributes such as User-Password may be
1108 # "sensitive", so they should not be printed in the
1109 # detail file. This section lists the attributes
1110 # that should be suppressed.
1112 # The attributes should be listed one to a line.
1120 # Many people want to log authentication requests.
1121 # Rather than modifying the server core to print out more
1122 # messages, we can use a different instance of the 'detail'
1123 # module, to log the authentication requests to a file.
1125 # You will also need to un-comment the 'auth_log' line
1126 # in the 'authorize' section, below.
1129 # detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d
1132 # This MUST be 0600, otherwise anyone can read
1133 # the users passwords!
1138 # This module logs authentication reply packets sent
1139 # to a NAS. Both Access-Accept and Access-Reject packets
1142 # You will also need to un-comment the 'reply_log' line
1143 # in the 'post-auth' section, below.
1145 # detail reply_log {
1146 # detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d
1149 # This MUST be 0600, otherwise anyone can read
1150 # the users passwords!
1155 # This module logs packets proxied to a home server.
1157 # You will also need to un-comment the 'pre_proxy_log' line
1158 # in the 'pre-proxy' section, below.
1160 # detail pre_proxy_log {
1161 # detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d
1164 # This MUST be 0600, otherwise anyone can read
1165 # the users passwords!
1170 # This module logs response packets from a home server.
1172 # You will also need to un-comment the 'post_proxy_log' line
1173 # in the 'post-proxy' section, below.
1175 # detail post_proxy_log {
1176 # detailfile = ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d
1179 # This MUST be 0600, otherwise anyone can read
1180 # the users passwords!
1185 # The rlm_sql_log module appends the SQL queries in a log
1186 # file which is read later by the radsqlrelay program.
1188 # This module only performs the dynamic expansion of the
1189 # variables found in the SQL statements. No operation is
1190 # executed on the database server. (this could be done
1191 # later by an external program) That means the module is
1192 # useful only with non-"SELECT" statements.
1194 # See rlm_sql_log(5) manpage.
1197 # path = ${radacctdir}/sql-relay
1198 # acct_table = "radacct"
1199 # postauth_table = "radpostauth"
1201 # Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
1202 # NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
1203 # AcctSessionTime, AcctTerminateCause) VALUES \
1204 # ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
1205 # '%{Framed-IP-Address}', '%S', '0', '0', '');"
1206 # Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
1207 # NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
1208 # AcctSessionTime, AcctTerminateCause) VALUES \
1209 # ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
1210 # '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \
1211 # '%{Acct-Terminate-Cause}');"
1212 # Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
1213 # NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
1214 # AcctSessionTime, AcctTerminateCause) VALUES \
1215 # ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
1216 # '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');"
1218 # Post-Auth = "INSERT INTO ${postauth_table} \
1219 # (user, pass, reply, date) VALUES \
1220 # ('%{User-Name}', '%{User-Password:-Chap-Password}', \
1221 # '%{reply:Packet-Type}', '%S');"
1225 # Create a unique accounting session Id. Many NASes re-use
1226 # or repeat values for Acct-Session-Id, causing no end of
1229 # This module will add a (probably) unique session id
1230 # to an accounting packet based on the attributes listed
1231 # below found in the packet. See doc/rlm_acct_unique for
1235 key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
1239 # Include another file that has the SQL-related configuration.
1240 # This is another file only because it tends to be big.
1242 # The following configuration file is for use with MySQL.
1244 # For Postgresql, use: ${confdir}/postgresql.conf
1245 # For MS-SQL, use: ${confdir}/mssql.conf
1246 # For Oracle, use: ${confdir}/oraclesql.conf
1248 $INCLUDE ${confdir}/sql.conf
1251 # For Cisco VoIP specific accounting with Postgresql,
1252 # use: ${confdir}/pgsql-voip.conf
1254 # You will also need the sql schema from:
1255 # src/billing/cisco_h323_db_schema-postgres.sql
1256 # Note: This config can be use AS WELL AS the standard sql
1257 # config if you need SQL based Auth
1260 # Write a 'utmp' style file, of which users are currently
1261 # logged in, and where they've logged in from.
1263 # This file is used mainly for Simultaneous-Use checking,
1264 # and also 'radwho', to see who's currently logged in.
1267 # Where the file is stored. It's not a log file,
1268 # so it doesn't need rotating.
1270 filename = ${logdir}/radutmp
1272 # The field in the packet to key on for the
1273 # 'user' name, If you have other fields which you want
1274 # to use to key on to control Simultaneous-Use,
1275 # then you can use them here.
1277 # Note, however, that the size of the field in the
1278 # 'utmp' data structure is small, around 32
1279 # characters, so that will limit the possible choices
1282 # You may want instead: %{Stripped-User-Name:-%{User-Name}}
1283 username = %{User-Name}
1286 # Whether or not we want to treat "user" the same
1287 # as "USER", or "User". Some systems have problems
1288 # with case sensitivity, so this should be set to
1289 # 'no' to enable the comparisons of the key attribute
1290 # to be case insensitive.
1292 case_sensitive = yes
1294 # Accounting information may be lost, so the user MAY
1295 # have logged off of the NAS, but we haven't noticed.
1296 # If so, we can verify this information with the NAS,
1298 # If we want to believe the 'utmp' file, then this
1299 # configuration entry can be set to 'no'.
1301 check_with_nas = yes
1303 # Set the file permissions, as the contents of this file
1304 # are usually private.
1310 # "Safe" radutmp - does not contain caller ID, so it can be
1311 # world-readable, and radwho can work for normal users, without
1312 # exposing any information that isn't already exposed by who(1).
1314 # This is another 'instance' of the radutmp module, but it is given
1315 # then name "sradutmp" to identify it later in the "accounting"
1318 filename = ${logdir}/sradutmp
1323 # attr_filter - filters the attributes received in replies from
1324 # proxied servers, to make sure we send back to our RADIUS client
1325 # only allowed attributes.
1327 attrsfile = ${confdir}/attrs
1331 # This module takes an attribute (count-attribute).
1332 # It also takes a key, and creates a counter for each unique
1333 # key. The count is incremented when accounting packets are
1334 # received by the server. The value of the increment depends
1335 # on the attribute type.
1336 # If the attribute is Acct-Session-Time or of an integer type we add the
1337 # value of the attribute. If it is anything else we increase the
1340 # The 'reset' parameter defines when the counters are all reset to
1341 # zero. It can be hourly, daily, weekly, monthly or never.
1343 # hourly: Reset on 00:00 of every hour
1344 # daily: Reset on 00:00:00 every day
1345 # weekly: Reset on 00:00:00 on sunday
1346 # monthly: Reset on 00:00:00 of the first day of each month
1348 # It can also be user defined. It should be of the form:
1350 # h: hours, d: days, w: weeks, m: months
1351 # If the letter is ommited days will be assumed. In example:
1352 # reset = 10h (reset every 10 hours)
1353 # reset = 12 (reset every 12 days)
1356 # The check-name attribute defines an attribute which will be
1357 # registered by the counter module and can be used to set the
1358 # maximum allowed value for the counter after which the user
1362 # DEFAULT Max-Daily-Session := 36000
1365 # You should add the counter module in the instantiate
1366 # section so that it registers check-name before the files
1367 # module reads the users file.
1369 # If check-name is set and the user is to be rejected then we
1370 # send back a Reply-Message and we log a Failure-Message in
1372 # If the count attribute is Acct-Session-Time then on each login
1373 # we send back the remaining online time as a Session-Timeout attribute
1375 # The counter-name can also be used instead of using the check-name
1378 # DEFAULT Daily-Session-Time > 3600, Auth-Type = Reject
1379 # Reply-Message = "You've used up more than one hour today"
1381 # The allowed-servicetype attribute can be used to only take
1382 # into account specific sessions. For example if a user first
1383 # logs in through a login menu and then selects ppp there will
1384 # be two sessions. One for Login-User and one for Framed-User
1385 # service type. We only need to take into account the second one.
1387 # The module should be added in the instantiate, authorize and
1388 # accounting sections. Make sure that in the authorize
1389 # section it comes after any module which sets the
1390 # 'check-name' attribute.
1393 filename = ${raddbdir}/db.daily
1395 count-attribute = Acct-Session-Time
1397 counter-name = Daily-Session-Time
1398 check-name = Max-Daily-Session
1399 allowed-servicetype = Framed-User
1404 # This module is an SQL enabled version of the counter module.
1406 # Rather than maintaining seperate (GDBM) databases of
1407 # accounting info for each counter, this module uses the data
1408 # stored in the raddacct table by the sql modules. This
1409 # module NEVER does any database INSERTs or UPDATEs. It is
1410 # totally dependent on the SQL module to process Accounting
1413 # The 'sqlmod_inst' parameter holds the instance of the sql
1414 # module to use when querying the SQL database. Normally it
1415 # is just "sql". If you define more and one SQL module
1416 # instance (usually for failover situations), you can
1417 # specify which module has access to the Accounting Data
1420 # The 'reset' parameter defines when the counters are all
1421 # reset to zero. It can be hourly, daily, weekly, monthly or
1422 # never. It can also be user defined. It should be of the
1425 # h: hours, d: days, w: weeks, m: months
1426 # If the letter is ommited days will be assumed. In example:
1427 # reset = 10h (reset every 10 hours)
1428 # reset = 12 (reset every 12 days)
1430 # The 'key' parameter specifies the unique identifier for the
1431 # counter records (usually 'User-Name').
1433 # The 'query' parameter specifies the SQL query used to get
1434 # the current Counter value from the database. There are 3
1435 # parameters that can be used in the query:
1436 # %k 'key' parameter
1437 # %b unix time value of beginning of reset period
1438 # %e unix time value of end of reset period
1440 # The 'check-name' parameter is the name of the 'check'
1441 # attribute to use to access the counter in the 'users' file
1442 # or SQL radcheck or radcheckgroup tables.
1444 # DEFAULT Max-Daily-Session > 3600, Auth-Type = Reject
1445 # Reply-Message = "You've used up more than one hour today"
1447 sqlcounter dailycounter {
1448 counter-name = Daily-Session-Time
1449 check-name = Max-Daily-Session
1454 # This query properly handles calls that span from the
1455 # previous reset period into the current period but
1456 # involves more work for the SQL server than those
1459 query = "SELECT SUM(AcctSessionTime - \
1460 GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
1461 FROM radacct WHERE UserName='%{%k}' AND \
1462 UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
1465 # query = "SELECT SUM(AcctSessionTime - \
1466 # GREATER((%b - AcctStartTime::ABSTIME::INT4), 0)) \
1467 # FROM radacct WHERE UserName='%{%k}' AND \
1468 # AcctStartTime::ABSTIME::INT4 + AcctSessionTime > '%b'"
1470 # This query ignores calls that started in a previous
1471 # reset period and continue into into this one. But it
1472 # is a little easier on the SQL server
1474 # query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
1475 # UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')"
1478 # query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
1479 # UserName='%{%k}' AND AND AcctStartTime::ABSTIME::INT4 > '%b'"
1481 # This query is the same as above, but demonstrates an
1482 # additional counter parameter '%e' which is the
1483 # timestamp for the end of the period
1485 # query = "SELECT SUM(AcctSessionTime) FROM radacct \
1486 # WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \
1487 # FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')"
1490 # query = "SELECT SUM(AcctSessionTime) FROM radacct \
1491 # WHERE UserName='%{%k}' AND AcctStartTime::ABSTIME::INT4 \
1492 # BETWEEN '%b' AND '%e'"
1495 sqlcounter monthlycounter {
1496 counter-name = Monthly-Session-Time
1497 check-name = Max-Monthly-Session
1502 # This query properly handles calls that span from the
1503 # previous reset period into the current period but
1504 # involves more work for the SQL server than those
1506 # The same notes above about the differences between mysql
1507 # versus postgres queries apply here.
1508 query = "SELECT SUM(AcctSessionTime - \
1509 GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
1510 FROM radacct WHERE UserName='%{%k}' AND \
1511 UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
1513 # This query ignores calls that started in a previous
1514 # reset period and continue into into this one. But it
1515 # is a little easier on the SQL server
1516 # query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
1517 # UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')"
1519 # This query is the same as above, but demonstrates an
1520 # additional counter parameter '%e' which is the
1521 # timestamp for the end of the period
1522 # query = "SELECT SUM(AcctSessionTime) FROM radacct \
1523 # WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \
1524 # FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')"
1528 # The "always" module is here for debugging purposes. Each
1529 # instance simply returns the same result, always, without
1544 # The 'expression' module currently has no configuration.
1546 # This module is useful only for 'xlat'. To use it,
1547 # put 'exec' into the 'instantiate' section. You can then
1548 # do dynamic translation of attributes like:
1550 # Attribute-Name = `%{expr:2 + 3 + %{exec: uid -u}}`
1552 # The value of the attribute will be replaced with the output
1553 # of the program which is executed. Due to RADIUS protocol
1554 # limitations, any output over 253 bytes will be ignored.
1559 # The 'digest' module currently has no configuration.
1561 # "Digest" authentication against a Cisco SIP server.
1562 # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details
1563 # on performing digest authentication for Cisco SIP servers.
1569 # Execute external programs
1571 # This module is useful only for 'xlat'. To use it,
1572 # put 'exec' into the 'instantiate' section. You can then
1573 # do dynamic translation of attributes like:
1575 # Attribute-Name = `%{exec:/path/to/program args}`
1577 # The value of the attribute will be replaced with the output
1578 # of the program which is executed. Due to RADIUS protocol
1579 # limitations, any output over 253 bytes will be ignored.
1581 # The RADIUS attributes from the user request will be placed
1582 # into environment variables of the executed program, as
1583 # described in 'doc/variables.txt'
1587 input_pairs = request
1591 # This is a more general example of the execute module.
1593 # This one is called "echo".
1595 # Attribute-Name = `%{echo:/path/to/program args}`
1597 # If you wish to execute an external program in more than
1598 # one section (e.g. 'authorize', 'pre_proxy', etc), then it
1599 # is probably best to define a different instance of the
1600 # 'exec' module for every section.
1604 # Wait for the program to finish.
1606 # If we do NOT wait, then the program is "fire and
1607 # forget", and any output attributes from it are ignored.
1609 # If we are looking for the program to output
1610 # attributes, and want to add those attributes to the
1611 # request, then we MUST wait for the program to
1612 # finish, and therefore set 'wait=yes'
1614 # allowed values: {no, yes}
1618 # The name of the program to execute, and it's
1619 # arguments. Dynamic translation is done on this
1620 # field, so things like the following example will
1623 program = "/bin/echo %{User-Name}"
1626 # The attributes which are placed into the
1627 # environment variables for the program.
1629 # Allowed values are:
1631 # request attributes from the request
1632 # config attributes from the configuration items list
1633 # reply attributes from the reply
1634 # proxy-request attributes from the proxy request
1635 # proxy-reply attributes from the proxy reply
1637 # Note that some attributes may not exist at some
1638 # stages. e.g. There may be no proxy-reply
1639 # attributes if this module is used in the
1640 # 'authorize' section.
1642 input_pairs = request
1645 # Where to place the output attributes (if any) from
1646 # the executed program. The values allowed, and the
1647 # restrictions as to availability, are the same as
1648 # for the input_pairs.
1650 output_pairs = reply
1653 # When to execute the program. If the packet
1654 # type does NOT match what's listed here, then
1655 # the module does NOT execute the program.
1657 # For a list of allowed packet types, see
1658 # the 'dictionary' file, and look for VALUEs
1659 # of the Packet-Type attribute.
1661 # By default, the module executes on ANY packet.
1662 # Un-comment out the following line to tell the
1663 # module to execute only if an Access-Accept is
1664 # being sent to the NAS.
1666 #packet_type = Access-Accept
1669 # Do server side ip pool management. Should be added in post-auth and
1670 # accounting sections.
1672 # The module also requires the existance of the Pool-Name
1673 # attribute. That way the administrator can add the Pool-Name
1674 # attribute in the user profiles and use different pools
1675 # for different users. The Pool-Name attribute is a *check* item not
1679 # radiusd.conf: ippool students { [...] }
1680 # users file : DEFAULT Group == students, Pool-Name := "students"
1682 # ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST *********
1683 # ********* THEN ERASE THE DB FILES *********
1687 # range-start,range-stop: The start and end ip
1688 # addresses for the ip pool
1689 range-start = 192.168.1.1
1690 range-stop = 192.168.3.254
1692 # netmask: The network mask used for the ip's
1693 netmask = 255.255.255.0
1695 # cache-size: The gdbm cache size for the db
1696 # files. Should be equal to the number of ip's
1697 # available in the ip pool
1700 # session-db: The main db file used to allocate ip's to clients
1701 session-db = ${raddbdir}/db.ippool
1703 # ip-index: Helper db index file used in multilink
1704 ip-index = ${raddbdir}/db.ipindex
1706 # override: Will this ippool override a Framed-IP-Address already set
1709 # maximum-timeout: If not zero specifies the maximum time in seconds an
1710 # entry may be active. Default: 0
1714 # $INCLUDE ${confdir}/sqlippool.conf
1716 # OTP token support. Not included by default.
1717 # $INCLUDE ${confdir}/otp.conf
1723 # This section orders the loading of the modules. Modules
1724 # listed here will get loaded BEFORE the later sections like
1725 # authorize, authenticate, etc. get examined.
1727 # This section is not strictly needed. When a section like
1728 # authorize refers to a module, it's automatically loaded and
1729 # initialized. However, some modules may not be listed in any
1730 # of the following sections, so they can be listed here.
1732 # Also, listing modules here ensures that you have control over
1733 # the order in which they are initalized. If one module needs
1734 # something defined by another module, you can list them in order
1735 # here, and ensure that the configuration will be OK.
1739 # Allows the execution of external scripts.
1740 # The entire command line (and output) must fit into 253 bytes.
1742 # e.g. Framed-Pool = `%{exec:/bin/echo foo}`
1746 # The expression module doesn't do authorization,
1747 # authentication, or accounting. It only does dynamic
1748 # translation, of the form:
1750 # Session-Timeout = `%{expr:2 + 3}`
1752 # So the module needs to be instantiated, but CANNOT be
1753 # listed in any other section. See 'doc/rlm_expr' for
1759 # We add the counter module here so that it registers
1760 # the check-name attribute before any module which sets
1765 # Authorization. First preprocess (hints and huntgroups files),
1766 # then realms, and finally look in the "users" file.
1768 # The order of the realm modules will determine the order that
1769 # we try to find a matching realm.
1771 # Make *sure* that 'preprocess' comes before any realm if you
1772 # need to setup hints for the remote radius server
1775 # The preprocess module takes care of sanitizing some bizarre
1776 # attributes in the request, and turning them into attributes
1777 # which are more standard.
1779 # It takes care of processing the 'raddb/hints' and the
1780 # 'raddb/huntgroups' files.
1782 # It also adds the %{Client-IP-Address} attribute to the request.
1786 # If you want to have a log of authentication requests,
1787 # un-comment the following line, and the 'detail auth_log'
1794 # The chap module will set 'Auth-Type := CHAP' if we are
1795 # handling a CHAP request and Auth-Type has not already been set
1799 # If the users are logging in with an MS-CHAP-Challenge
1800 # attribute for authentication, the mschap module will find
1801 # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
1802 # to the request, which will cause the server to then use
1803 # the mschap module for authentication.
1807 # If you have a Cisco SIP server authenticating against
1808 # FreeRADIUS, uncomment the following line, and the 'digest'
1809 # line in the 'authenticate' section.
1813 # Look for IPASS style 'realm/', and if not found, look for
1814 # '@realm', and decide whether or not to proxy, based on
1819 # If you are using multiple kinds of realms, you probably
1820 # want to set "ignore_null = yes" for all of them.
1821 # Otherwise, when the first style of realm doesn't match,
1822 # the other styles won't be checked.
1828 # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
1831 # It also sets the EAP-Type attribute in the request
1832 # attribute list to the EAP type from the packet.
1836 # Read the 'users' file
1840 # Look in an SQL database. The schema of the database
1841 # is meant to mirror the "users" file.
1843 # See "Authorization Queries" in sql.conf
1847 # If you are using /etc/smbpasswd, and are also doing
1848 # mschap authentication, the un-comment this line, and
1849 # configure the 'etc_smbpasswd' module, above.
1853 # The ldap module will set Auth-Type to LDAP if it has not
1858 # Enforce daily limits on time spent logged in.
1862 # Use the checkval module
1870 # This section lists which modules are available for authentication.
1871 # Note that it does NOT mean 'try each module in order'. It means
1872 # that a module from the 'authorize' section adds a configuration
1873 # attribute 'Auth-Type := FOO'. That authentication type is then
1874 # used to pick the apropriate module from the list below.
1877 # In general, you SHOULD NOT set the Auth-Type attribute. The server
1878 # will figure it out on its own, and will do the right thing. The
1879 # most common side effect of erroneously setting the Auth-Type
1880 # attribute is that one authentication method will work, but the
1883 # The common reasons to set the Auth-Type attribute by hand
1884 # is to either forcibly reject the user, or forcibly accept him.
1888 # PAP authentication, when a back-end database listed
1889 # in the 'authorize' section supplies a password. The
1890 # password can be clear-text, or encrypted.
1896 # Most people want CHAP authentication
1897 # A back-end database listed in the 'authorize' section
1898 # MUST supply a CLEAR TEXT password. Encrypted passwords
1905 # MSCHAP authentication.
1911 # If you have a Cisco SIP server authenticating against
1912 # FreeRADIUS, uncomment the following line, and the 'digest'
1913 # line in the 'authorize' section.
1917 # Pluggable Authentication Modules.
1921 # See 'man getpwent' for information on how the 'unix'
1922 # module checks the users password. Note that packets
1923 # containing CHAP-Password attributes CANNOT be authenticated
1924 # against /etc/passwd! See the FAQ for details.
1928 # Uncomment it if you want to use ldap for authentication
1930 # Note that this means "check plain-text password against
1931 # the ldap database", which means that EAP won't work,
1932 # as it does not supply a plain-text password.
1938 # Allow EAP authentication.
1944 # Pre-accounting. Decide which accounting type to use.
1950 # Ensure that we have a semi-unique identifier for every
1951 # request, and many NAS boxes are broken.
1955 # Look for IPASS-style 'realm/', and if not found, look for
1956 # '@realm', and decide whether or not to proxy, based on
1959 # Accounting requests are generally proxied to the same
1960 # home server as authentication requests.
1966 # Read the 'acct_users' file
1971 # Accounting. Log the accounting data.
1975 # Create a 'detail'ed log of the packets.
1976 # Note that accounting requests which are proxied
1977 # are also logged in the detail file.
1981 # Update the wtmp file
1983 # If you don't use "radlast", you can delete this line.
1987 # For Simultaneous-Use tracking.
1989 # Due to packet losses in the network, the data here
1990 # may be incorrect. There is little we can do about it.
1994 # Return an address to the IP Pool when we see a stop record.
1998 # Log traffic to an SQL database.
2000 # See "Accounting queries" in sql.conf
2004 # Instead of sending the query to the SQL server,
2005 # write it into a log file.
2009 # Cisco VoIP specific bulk accounting
2015 # Session database, used for checking Simultaneous-Use. Either the radutmp
2016 # or rlm_sql module can handle this.
2017 # The rlm_sql module is *much* faster
2022 # See "Simultaneous Use Checking Querie" in sql.conf
2027 # Post-Authentication
2028 # Once we KNOW that the user has been authenticated, there are
2029 # additional steps we can take.
2031 # Get an address from the IP Pool.
2035 # If you want to have a log of authentication replies,
2036 # un-comment the following line, and the 'detail reply_log'
2041 # After authenticating the user, do another SQL query.
2043 # See "Authentication Logging Queries" in sql.conf
2047 # Instead of sending the query to the SQL server,
2048 # write it into a log file.
2053 # Un-comment the following if you have set
2054 # 'edir_account_policy_check = yes' in the ldap module sub-section of
2055 # the 'modules' section.
2059 # Access-Reject packets are sent through the REJECT sub-section of the
2060 # post-auth section.
2061 # Uncomment the following and set the module name to the ldap instance
2062 # name if you have set 'edir_account_policy_check = yes' in the ldap
2063 # module sub-section of the 'modules' section.
2065 # Post-Auth-Type REJECT {
2066 # insert-module-name-here
2072 # When the server decides to proxy a request to a home server,
2073 # the proxied request is first passed through the pre-proxy
2074 # stage. This stage can re-write the request, or decide to
2077 # Only a few modules currently have this method.
2082 # Uncomment the following line if you want to change attributes
2083 # as defined in the preproxy_users file.
2086 # If you want to have a log of packets proxied to a home
2087 # server, un-comment the following line, and the
2088 # 'detail pre_proxy_log' section, above.
2093 # When the server receives a reply to a request it proxied
2094 # to a home server, the request may be massaged here, in the
2099 # If you want to have a log of replies from a home server,
2100 # un-comment the following line, and the 'detail post_proxy_log'
2106 # Uncomment the following line if you want to filter replies from
2107 # remote proxies based on the rules defined in the 'attrs' file.
2112 # If you are proxying LEAP, you MUST configure the EAP
2113 # module, and you MUST list it here, in the post-proxy
2116 # You MUST also use the 'nostrip' option in the 'realm'
2117 # configuration. Otherwise, the User-Name attribute
2118 # in the proxied request will not match the user name
2119 # hidden inside of the EAP packet, and the end server will
2120 # reject the EAP request.