2 ######################################################################
4 # This is a virtual server that handles *only* inner tunnel
5 # requests for EAP-TTLS and PEAP types.
9 ######################################################################
14 # This next section is here to allow testing of the "inner-tunnel"
15 # authentication methods, independently from the "default" server.
16 # It is listening on "localhost", so that it can only be used from
19 # $ radtest USER PASSWORD 127.0.0.1:18120 0 testing123
21 # If it works, you have configured the inner tunnel correctly. To check
22 # if PEAP will work, use:
24 # $ radtest -t mschap USER PASSWORD 127.0.0.1:18120 0 testing123
26 # If that works, PEAP should work. If that command doesn't work, then
28 # FIX THE INNER TUNNEL CONFIGURATION SO THAT IT WORKS.
30 # Do NOT do any PEAP tests. It won't help. Instead, concentrate
31 # on fixing the inner tunnel configuration. DO NOTHING ELSE.
40 # Authorization. First preprocess (hints and huntgroups files),
41 # then realms, and finally look in the "users" file.
43 # The order of the realm modules will determine the order that
44 # we try to find a matching realm.
46 # Make *sure* that 'preprocess' comes before any realm if you
47 # need to setup hints for the remote radius server
50 # The chap module will set 'Auth-Type := CHAP' if we are
51 # handling a CHAP request and Auth-Type has not already been set
55 # If the users are logging in with an MS-CHAP-Challenge
56 # attribute for authentication, the mschap module will find
57 # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
58 # to the request, which will cause the server to then use
59 # the mschap module for authentication.
63 # Pull crypt'd passwords from /etc/passwd or /etc/shadow,
64 # using the system API's to get the password. If you want
65 # to read /etc/passwd or /etc/shadow directly, see the
66 # passwd module, above.
71 # Look for IPASS style 'realm/', and if not found, look for
72 # '@realm', and decide whether or not to proxy, based on
77 # If you are using multiple kinds of realms, you probably
78 # want to set "ignore_null = yes" for all of them.
79 # Otherwise, when the first style of realm doesn't match,
80 # the other styles won't be checked.
82 # Note that proxying the inner tunnel authentication means
83 # that the user MAY use one identity in the outer session
84 # (e.g. "anonymous", and a different one here
85 # (e.g. "user@example.com"). The inner session will then be
86 # proxied elsewhere for authentication. If you are not
87 # careful, this means that the user can cause you to forward
88 # the authentication to another RADIUS server, and have the
89 # accounting logs *not* sent to the other server. This makes
90 # it difficult to bill people for their network activity.
96 # The "suffix" module takes care of stripping the domain
97 # (e.g. "@example.com") from the User-Name attribute, and the
98 # next few lines ensure that the request is not proxied.
100 # If you want the inner tunnel request to be proxied, delete
101 # the next few lines.
104 &Proxy-To-Realm := LOCAL
108 # This module takes care of EAP-MSCHAPv2 authentication.
110 # It also sets the EAP-Type attribute in the request
111 # attribute list to the EAP type from the packet.
113 # The example below uses module failover to avoid querying all
114 # of the following modules if the EAP module returns "ok".
115 # Therefore, your LDAP and/or SQL servers will not be queried
116 # for the many packets that go back and forth to set up TTLS
117 # or PEAP. The load on those servers will therefore be reduced.
124 # Read the 'users' file
128 # Look in an SQL database. The schema of the database
129 # is meant to mirror the "users" file.
131 # See "Authorization Queries" in sql.conf
135 # If you are using /etc/smbpasswd, and are also doing
136 # mschap authentication, the un-comment this line, and
137 # configure the 'etc_smbpasswd' module, above.
141 # The ldap module reads passwords from the LDAP database.
145 # Enforce daily limits on time spent logged in.
152 # If no other module has claimed responsibility for
153 # authentication, then try to use PAP. This allows the
154 # other modules listed above to add a "known good" password
155 # to the request, and to do nothing else. The PAP module
156 # will then see that password, and use it to do PAP
159 # This module should be listed last, so that the other modules
160 # get a chance to set Auth-Type for themselves.
169 # This section lists which modules are available for authentication.
170 # Note that it does NOT mean 'try each module in order'. It means
171 # that a module from the 'authorize' section adds a configuration
172 # attribute 'Auth-Type := FOO'. That authentication type is then
173 # used to pick the appropriate module from the list below.
176 # In general, you SHOULD NOT set the Auth-Type attribute. The server
177 # will figure it out on its own, and will do the right thing. The
178 # most common side effect of erroneously setting the Auth-Type
179 # attribute is that one authentication method will work, but the
182 # The common reasons to set the Auth-Type attribute by hand
183 # is to either forcibly reject the user, or forcibly accept him.
187 # PAP authentication, when a back-end database listed
188 # in the 'authorize' section supplies a password. The
189 # password can be clear-text, or encrypted.
195 # Most people want CHAP authentication
196 # A back-end database listed in the 'authorize' section
197 # MUST supply a CLEAR TEXT password. Encrypted passwords
204 # MSCHAP authentication.
210 # Pluggable Authentication Modules.
213 # Uncomment it if you want to use ldap for authentication
215 # Note that this means "check plain-text password against
216 # the ldap database", which means that EAP won't work,
217 # as it does not supply a plain-text password.
219 # We do NOT recommend using this. LDAP servers are databases.
220 # They are NOT authentication servers. FreeRADIUS is an
221 # authentication server, and knows what to do with authentication.
222 # LDAP servers do not.
229 # Allow EAP authentication.
233 ######################################################################
235 # There are no accounting requests inside of EAP-TTLS or PEAP
238 ######################################################################
241 # Session database, used for checking Simultaneous-Use. Either the radutmp
242 # or rlm_sql module can handle this.
243 # The rlm_sql module is *much* faster
248 # See "Simultaneous Use Checking Queries" in sql.conf
253 # Post-Authentication
254 # Once we KNOW that the user has been authenticated, there are
255 # additional steps we can take.
257 # Note that the last packet of the inner-tunnel authentication
258 # MAY NOT BE the last packet of the outer session. So updating
259 # the outer reply MIGHT work, and sometimes MIGHT NOT. The
260 # exact functionality depends on both the inner and outer
261 # authentication methods.
263 # If you need to send a reply attribute in the outer session,
264 # the ONLY safe way is to set "use_tunneled_reply = yes", and
265 # then update the inner-tunnel reply.
267 # If you want privacy to remain, see the
268 # Chargeable-User-Identity attribute from RFC 4372.
269 # If you want to use it just uncomment the line below.
273 # If you want to have a log of authentication replies,
274 # un-comment the following line, and enable the
275 # 'detail reply_log' module.
279 # After authenticating the user, do another SQL query.
281 # See "Authentication Logging Queries" in sql.conf
285 # Instead of sending the query to the SQL server,
286 # write it into a log file.
291 # Un-comment the following if you have set
292 # 'edir_account_policy_check = yes' in the ldap module sub-section of
293 # the 'modules' section.
299 # Instead of "use_tunneled_reply", uncomment the
300 # next two "update" blocks.
303 # &outer.session-state: += &reply:
307 # These attributes are for the inner session only.
308 # They MUST NOT be sent in the outer reply.
310 # If you uncomment the previous block and leave
311 # this one commented out, WiFi WILL NOT WORK,
312 # because the client will get two MS-MPPE-keys
314 # update outer.session-state {
315 # MS-MPPE-Encryption-Policy !* ANY
316 # MS-MPPE-Encryption-Types !* ANY
317 # MS-MPPE-Send-Key !* ANY
318 # MS-MPPE-Recv-Key !* ANY
319 # Message-Authenticator !* ANY
325 # Access-Reject packets are sent through the REJECT sub-section of the
328 # Add the ldap module name (or instance) if you have set
329 # 'edir_account_policy_check = yes' in the ldap module configuration
331 Post-Auth-Type REJECT {
332 # log failed authentications in SQL, too.
334 attr_filter.access_reject
337 # Let the outer session know which module failed, and why.
339 update outer.session-state {
340 Module-Failure-Message := &request:Module-Failure-Message
346 # When the server decides to proxy a request to a home server,
347 # the proxied request is first passed through the pre-proxy
348 # stage. This stage can re-write the request, or decide to
351 # Only a few modules currently have this method.
354 # Uncomment the following line if you want to change attributes
355 # as defined in the preproxy_users file.
358 # Uncomment the following line if you want to filter requests
359 # sent to remote servers based on the rules defined in the
360 # 'attrs.pre-proxy' file.
361 # attr_filter.pre-proxy
363 # If you want to have a log of packets proxied to a home
364 # server, un-comment the following line, and the
365 # 'detail pre_proxy_log' section, above.
370 # When the server receives a reply to a request it proxied
371 # to a home server, the request may be massaged here, in the
376 # If you want to have a log of replies from a home server,
377 # un-comment the following line, and the 'detail post_proxy_log'
381 # Uncomment the following line if you want to filter replies from
382 # remote proxies based on the rules defined in the 'attrs' file.
383 # attr_filter.post-proxy
386 # If you are proxying LEAP, you MUST configure the EAP
387 # module, and you MUST list it here, in the post-proxy
390 # You MUST also use the 'nostrip' option in the 'realm'
391 # configuration. Otherwise, the User-Name attribute
392 # in the proxied request will not match the user name
393 # hidden inside of the EAP packet, and the end server will
394 # reject the EAP request.
399 # If the server tries to proxy a request and fails, then the
400 # request is processed through the modules in this section.
402 # The main use of this section is to permit robust proxying
403 # of accounting packets. The server can be configured to
404 # proxy accounting packets as part of normal processing.
405 # Then, if the home server goes down, accounting packets can
406 # be logged to a local "detail" file, for processing with
407 # radrelay. When the home server comes back up, radrelay
408 # will read the detail file, and send the packets to the
411 # With this configuration, the server always responds to
412 # Accounting-Requests from the NAS, but only writes
413 # accounting packets to disk if the home server is down.
415 # Post-Proxy-Type Fail {
421 } # inner-tunnel server block