3 ## dialup.conf -- Oracle configuration for default schema (schema.sql)
7 #######################################################################
8 # Query config: Username
9 #######################################################################
10 # This is the username that will get substituted, escaped, and added
11 # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
12 # everywhere a username substitution is needed so you you can be sure
13 # the username passed from the client is escaped properly.
15 # Uncomment the next line, if you want the sql_user_name to mean:
17 # Use Stripped-User-Name, if it's there.
18 # Else use User-Name, if it's there,
19 # Else use hard-coded string "DEFAULT" as the user name.
20 #sql_user_name = "%{Stripped-User-Name:-%{User-Name:-DEFAULT}}"
22 sql_user_name = "%{User-Name}"
24 #######################################################################
26 #######################################################################
27 # This is the default profile. It is found in SQL by group membership.
28 # That means that this profile must be a member of at least one group
29 # which will contain the corresponding check and reply items.
30 # This profile will be queried in the authorize section for every user.
31 # The point is to assign all users a default profile without having to
32 # manually add each one to a group that will contain the profile.
33 # The SQL module will also honor the User-Profile attribute. This
34 # attribute can be set anywhere in the authorize section (ie the users
35 # file). It is found exactly as the default profile is found.
36 # If it is set then it will *overwrite* the default profile setting.
37 # The idea is to select profiles based on checks on the incoming packets,
38 # not on user group membership. For example:
40 # DEFAULT Service-Type == Outbound-User, User-Profile := "outbound"
41 # DEFAULT Service-Type == Framed-User, User-Profile := "framed"
43 # By default the default_user_profile is not set
45 #default_user_profile = "DEFAULT"
47 # Determines if we will query the default_user_profile or the User-Profile
48 # if the user is not found. If the profile is found then we consider the user
49 # found. By default this is set to 'no'.
51 #query_on_not_found = no
54 #######################################################################
55 # Authorization Queries
56 #######################################################################
57 # These queries compare the check items for the user
58 # in ${authcheck_table} and setup the reply items in
59 # ${authreply_table}. You can use any query/tables
60 # you want, but the return data for each row MUST
61 # be in the following order:
63 # 0. Row ID (currently unused)
64 # 1. UserName/GroupName
67 # 4. Item Attr Operation
68 #######################################################################
70 # WARNING: Oracle is case sensitive
72 # The main difference between MySQL and Oracle queries is the date format.
73 # You must use the TO_DATE function to transform the radius date format to
74 # the Oracle date format, and put NULL otherwise '0' in a void date field.
76 #######################################################################
78 authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
79 authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
81 authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
82 authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
84 #######################################################################
86 #######################################################################
87 # accounting_onoff_query - query for Accounting On/Off packets
88 # accounting_update_query - query for Accounting update packets
89 # accounting_update_query_alt - query for Accounting update packets
90 # (alternate in case first query fails)
91 # accounting_start_query - query for Accounting start packets
92 # accounting_start_query_alt - query for Accounting start packets
93 # (alternate in case first query fails)
94 # accounting_stop_query - query for Accounting stop packets
95 # accounting_stop_query_alt - query for Accounting start packets
96 # (alternate in case first query doesn't
97 # affect any existing rows in the table)
98 #######################################################################
99 accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime=TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime=((TO_DATE('%S','yyyy-mm-dd hh24:mi:ss') - AcctStartTime)*86400), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time:-0} WHERE AcctSessionTime=0 AND AcctStopTime IS NULL AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')"
101 accounting_update_query = "UPDATE ${acct_table1} \
102 SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', ''), \
103 AcctSessionTime = '%{Acct-Session-Time}', \
104 AcctInputOctets = '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
105 AcctOutputOctets = '%{Acct-Output-Octets}' + ('%{Acct-Output-Gigawords}' * 4294967296) \
107 AcctSessionId = '%{Acct-Session-Id}' AND \
108 UserName = '%{SQL-User-Name}' AND \
109 NASIPAddress= '%{NAS-IP-Address}' AND \
110 AcctStopTime IS NULL"
112 accounting_update_query_alt = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) \
113 VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
114 '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', \
115 '%{NAS-Port-Type}', NULL, '%{Acct-Session-Time}', '%{Acct-Authentic}', '', \
116 '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
117 '%{Acct-Output-Octets}' + ('%{Acct-Output-Gigawords}' * 4294967296), \
118 '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', \
119 '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
121 accounting_start_query = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) \
122 VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')"
124 accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctStartDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
126 accounting_stop_query = "UPDATE ${acct_table2} \
127 SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \
128 AcctSessionTime = '%{Acct-Session-Time}', \
129 AcctInputOctets = '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
130 AcctOutputOctets = '%{Acct-Output-Octets}' + ('%{Acct-Output-Gigawords}' * 4294967296), \
131 AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
133 # Optional Query - pnixon
134 #accounting_stop_query =3D "UPDATE ${acct_table2} SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime = (substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+7,2) + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+4,2)*60 + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+1,2)*3600 + trunc(to_number(substr((sysdate-acctstarttime),1,instr(sysdate-acctstarttime,' '))))*86400), AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId =3D '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
136 accounting_stop_query_alt = "INSERT into ${acct_table2} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) \
137 VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', \
138 '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', NULL, TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \
139 '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', \
140 '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
141 '%{Acct-Output-Octets}' + ('%{Acct-Output-Gigawords}' * 4294967296), \
142 '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', \
143 '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')"
145 #######################################################################
146 # Simultaneous Use Checking Queries
147 #######################################################################
148 # simul_count_query - query for the number of current connections
149 # - If this is not defined, no simultaneouls use checking
150 # - will be performed by this module instance
151 # simul_verify_query - query to return details of current connections for verification
152 # - Leave blank or commented out to disable verification step
153 # - Note that the returned field order should not be changed.
154 #######################################################################
156 # Uncomment simul_count_query to enable simultaneous use checking
157 # simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
158 simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
160 #######################################################################
161 # Group Membership Queries
162 #######################################################################
163 # group_membership_query - Check user group membership
164 #######################################################################
166 group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}'"