2 # Please read the documentation file ../doc/processing_users_file,
3 # or 'man 5 users' (after installing the server) for more information.
5 # This file contains authentication security and configuration
6 # information for each user. Accounting requests are NOT processed
7 # through this file. Instead, see 'acct_users', in this directory.
9 # The first field is the user's name and can be up to
10 # 253 characters in length. This is followed (on the same line) with
11 # the list of authentication requirements for that user. This can
12 # include password, comm server name, comm server port number, protocol
13 # type (perhaps set by the "hints" file), and huntgroup name (set by
14 # the "huntgroups" file).
16 # If you are not sure why a particular reply is being sent by the
17 # server, then run the server in debugging mode (radiusd -X), and
18 # you will see which entries in this file are matched.
20 # When an authentication request is received from the comm server,
21 # these values are tested. Only the first match is used unless the
22 # "Fall-Through" variable is set to "Yes".
24 # A special user named "DEFAULT" matches on all usernames.
25 # You can have several DEFAULT entries. All entries are processed
26 # in the order they appear in this file. The first entry that
27 # matches the login-request will stop processing unless you use
28 # the Fall-Through variable.
30 # If you use the database support to turn this file into a .db or .dbm
31 # file, the DEFAULT entries _have_ to be at the end of this file and
32 # you can't have multiple entries for one username.
34 # Indented (with the tab character) lines following the first
35 # line indicate the configuration values to be passed back to
36 # the comm server to allow the initiation of a user session.
37 # This can include things like the PPP configuration values
38 # or the host to log the user onto.
40 # You can include another `users' file with `$INCLUDE users.other'
44 # For a list of RADIUS attributes, and links to their definitions,
47 # http://www.freeradius.org/rfc/attributes.html
51 # Deny access for a specific user. Note that this entry MUST
52 # be before any other 'Auth-Type' attribute which results in the user
53 # being authenticated.
55 # Note that there is NO 'Fall-Through' attribute, so the user will not
56 # be given any additional resources.
58 #lameuser Auth-Type := Reject
59 # Reply-Message = "Your account has been disabled."
62 # Deny access for a group of users.
64 # Note that there is NO 'Fall-Through' attribute, so the user will not
65 # be given any additional resources.
67 #DEFAULT Group == "disabled", Auth-Type := Reject
68 # Reply-Message = "Your account has been disabled."
72 # This is a complete entry for "steve". Note that there is no Fall-Through
73 # entry so that no DEFAULT entry will be used, and the user will NOT
74 # get any attributes in addition to the ones listed here.
76 #steve Cleartext-Password := "testing"
77 # Service-Type = Framed-User,
78 # Framed-Protocol = PPP,
79 # Framed-IP-Address = 172.16.3.33,
80 # Framed-IP-Netmask = 255.255.255.0,
81 # Framed-Routing = Broadcast-Listen,
82 # Framed-Filter-Id = "std.ppp",
84 # Framed-Compression = Van-Jacobsen-TCP-IP
87 # This is an entry for a user with a space in their name.
88 # Note the double quotes surrounding the name.
90 #"John Doe" Cleartext-Password := "hello"
91 # Reply-Message = "Hello, %{User-Name}"
94 # Dial user back and telnet to the default host for that port
96 #Deg Cleartext-Password := "ge55ged"
97 # Service-Type = Callback-Login-User,
98 # Login-IP-Host = 0.0.0.0,
99 # Callback-Number = "9,5551212",
100 # Login-Service = Telnet,
101 # Login-TCP-Port = Telnet
104 # Another complete entry. After the user "dialbk" has logged in, the
105 # connection will be broken and the user will be dialed back after which
106 # he will get a connection to the host "timeshare1".
108 #dialbk Cleartext-Password := "callme"
109 # Service-Type = Callback-Login-User,
110 # Login-IP-Host = timeshare1,
111 # Login-Service = PortMaster,
112 # Callback-Number = "9,1-800-555-1212"
115 # user "swilson" will only get a static IP number if he logs in with
116 # a framed protocol on a terminal server in Alphen (see the huntgroups file).
118 # Note that by setting "Fall-Through", other attributes will be added from
119 # the following DEFAULT entries
121 #swilson Service-Type == Framed-User, Huntgroup-Name == "alphen"
122 # Framed-IP-Address = 192.168.1.65,
126 # If the user logs in as 'username.shell', then authenticate them
127 # using the default method, give them shell access, and stop processing
128 # the rest of the file.
130 #DEFAULT Suffix == ".shell"
131 # Service-Type = Login-User,
132 # Login-Service = Telnet,
133 # Login-IP-Host = your.shell.machine
137 # The rest of this file contains the several DEFAULT entries.
138 # DEFAULT entries match with all login names.
139 # Note that DEFAULT entries can also Fall-Through (see first entry).
140 # A name-value pair from a DEFAULT entry will _NEVER_ override
141 # an already existing name-value pair.
145 # Set up different IP address pools for the terminal servers.
146 # Note that the "+" behind the IP address means that this is the "base"
147 # IP address. The Port-Id (S0, S1 etc) will be added to it.
149 #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "alphen"
150 # Framed-IP-Address = 192.168.1.32+,
153 #DEFAULT Service-Type == Framed-User, Huntgroup-Name == "delft"
154 # Framed-IP-Address = 192.168.2.32+,
158 # Sample defaults for all framed connections.
160 #DEFAULT Service-Type == Framed-User
161 # Framed-IP-Address = 255.255.255.254,
163 # Service-Type = Framed-User,
167 # Default for PPP: dynamic IP address, PPP mode, VJ-compression.
168 # NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected
169 # by the terminal server in which case there may not be a "P" suffix.
170 # The terminal server sends "Framed-Protocol = PPP" for auto PPP.
172 DEFAULT Framed-Protocol == PPP
173 Framed-Protocol = PPP,
174 Framed-Compression = Van-Jacobson-TCP-IP
177 # Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
179 DEFAULT Hint == "CSLIP"
180 Framed-Protocol = SLIP,
181 Framed-Compression = Van-Jacobson-TCP-IP
184 # Default for SLIP: dynamic IP address, SLIP mode.
186 DEFAULT Hint == "SLIP"
187 Framed-Protocol = SLIP
190 # Last default: rlogin to our main server.
193 # Service-Type = Login-User,
194 # Login-Service = Rlogin,
195 # Login-IP-Host = shellbox.ispdomain.com
198 # # Last default: shell on the local terminal server.
201 # Service-Type = Administrative-User
203 # On no match, the user is denied access.