1 # Master config file, must be in /etc/radsecproxy or specified with -c option
2 # All possible config options are listed below
4 # First you may define any global options, these are:
6 # You can optionally specify addresses and ports to listen on
7 # Multiple statements can be used for multiple ports/addresses
10 #ListenTCP [2001:700:1:7:215:f2ff:fe35:307d]:1812
11 #listenTLS 10.10.10.10:2084
12 #ListenTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084
13 #ListenDTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084
15 # To specify a certain address/port for UDP/TLS requests you can use e.g.
16 #SourceUDP 127.0.0.1:33000
20 # Optional log level. 3 is default, 1 is less, 4 is more
22 # Optional LogDestinatinon, else stderr used for logging
24 #LogDestination file:///tmp/rp.log
25 # Or logging with Syslog. LOG_DAEMON used if facility not specified
26 # The supported facilities are LOG_DAEMON, LOG_MAIL, LOG_USER and
27 # LOG_LOCAL0, ..., LOG_LOCAL7
28 #LogDestination x-syslog:///
29 #LogDestination x-syslog:///log_local2
31 # There is an option for doing some simple loop prevention
33 # Add TTL attribute with value 20 if not present (prevents endless loops)
36 # If we have TLS clients or servers we must define at least one tls block.
37 # You can name them whatever you like and then reference them by name when
38 # specifying clients or servers later. There are however three special names
39 # "default", "defaultclient" and "defaultserver". If no name is defined for
40 # a client, the "defaultclient" block will be used if it exists, if not the
41 # "default" will be used. For a server, "defaultserver" followed by "default"
44 # The simplest configuration you can do is:
46 # You must specify at least one of CACertificateFile or CACertificatePath
47 # for TLS to work. We always verify peer certificate (client and server)
48 # CACertificateFile /etc/cacerts/CA.pem
49 CACertificatePath /etc/cacerts
51 # You must specify the below for TLS, we always present our certificate
52 CertificateFile /etc/hostcertkey/host.example.com.pem
53 CertificateKeyFile /etc/hostcertkey/host.example.com.key.pem
54 # Optionally specify password if key is encrypted (not very secure)
55 CertificateKeyPassword "follow the white rabbit"
56 # Optionally enable CRL checking
58 # Optionally specify how long CAs and CRLs are cached, default forever
60 # Optionally require that peer certs have one of the specified policyOIDs
61 # policyoid 1.2.3 # this option can be used multiple times
65 # If you want one cert for all clients and another for all servers, use
66 # defaultclient and defaultserver instead of default. If we wanted some
67 # particular server to use something else you could specify a block
68 # "tls myserver" and then reference that for that server. If you always
69 # name the tls block in the client/server config you don't need a default
71 # Now we configure clients, servers and realms. Note that these and
72 # also the lines above may be in any order, except that a realm
73 # can only be configured to use a server that is previously configured.
75 # A realm can be a literal domain name, * which matches all, or a
76 # regexp. A regexp is specified by the character prefix /
77 # For regexp we do case insensitive matching of the entire username string.
78 # The matching of realms is done in the order they are specified, using the
79 # first match found. Some examples are
80 # "@example\.com$", "\.com$", ".*" and "^[a-z].*@example\.com$".
81 # To treat local users separately you might try first specifying "@"
84 # Configure a rewrite block if you want to add/remove/modify attributes
87 # removeVendorAttribute 99:100
88 # addAttribute 4 attribute%20value
89 # modifyAttribute 1:/^(.*)@local$/\1@example.com/
95 # we could specify tls here, e.g.
97 # in order to use tls parameters named myclient. We don't, so we will
98 # use "tls defaultclient" if defined, or look for "tls default" as a
104 # Might do rewriting of incoming messages using rewrite block example
106 # Can also do rewriting of outgoing messages
113 client radius.example.com {
115 # secret is optional for TLS
117 client radius.example.com {
119 # secret is optional for DTLS
125 # Might do rewriting of incoming messages using rewrite block example
127 # Can also do rewriting of outgoing messages
132 # If also want to use this server for accounting, specify
133 # accountingServer 127.0.0.1
139 # secret is optional for TLS
140 # we could specify tls here, e.g.
142 # in order to use tls parameters named myserver. We don't, so we will
143 # use "tls defaultserver" if defined, or look for "tls default" as a
146 server radius.example.com {
150 # statusserver is optional, can be on or off. Off is default
152 #server radius.example.com {
156 ## statusserver is optional, can be on or off. Off is default
159 # Equivalent to example.com
160 realm /@example\.com$ {
163 # One can define a realm without servers, the proxy will then reject
164 # and requests matching this. Optionally one can specify ReplyMessage
165 # attribute to be included in the reject message. One can also use
166 # AccountingResponse option to specify that the proxy should send such.
170 replymessage "No Access"
171 # AccountingResponse On
173 # The realm below is equivalent to /.*
175 server radius.example.com
177 # If you don't have a default server you probably want to
178 # reject all unknowns. Optionally you can also include a message
180 # replymessage "User unknown"