1 <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN"
2 "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
5 <date>2011-10-08</date>
9 <application>radsecproxy.conf</application>
11 <manvolnum>5</manvolnum>
12 <refmiscinfo>radsecproxy 1.5</refmiscinfo>
16 <application>radsecproxy.conf</application>
18 <refpurpose>Radsec proxy configuration file</refpurpose>
21 <title>Description</title>
23 When the proxy server starts, it will first check the command
24 line arguments, and then read the configuration file. Normally
25 radsecproxy will read the configuration file
26 <filename>/etc/radsecproxy.conf</filename>. The command line
27 <option>-c</option> option can be used to instead read an
30 <refentrytitle>radsecproxy</refentrytitle><manvolnum>1</manvolnum>
35 If the configuration file can not be found, the proxy will exit
36 with an error message. Note that there is also an include facility
37 so that any configuration file may include other configuration
38 files. The proxy will also exit on configuration errors.
42 <title>Configuration Syntax</title>
44 When the configuration file is processed, whitespace (spaces and
45 tabs) are generally ignored. For each line, leading and trailing
46 whitespace are ignored. A line is ignored if it is empty, only
47 consists of whitespace, or if the first non-whitespace character
48 is a <literal>#</literal>. The configuration is generally case
49 insensitive, but in some cases the option values (see below) are
53 There are two types of configuration structures than can be
54 used. The first and simplest are lines on the format
55 <emphasis>option value</emphasis>. That is, an option name, see
56 below for a list of valid options, followed by whitespace (at
57 least one space or tab character), followed by a value. Note
58 that if the value contains whitespace, then it must be quoted
59 using <literal>""</literal> or <literal>''</literal>. Any
60 whitespace in front of the option or after the value will be
64 The other type of structure is a block. A block spans at least
65 two lines, and has the format:
66 <blockquote><literallayout>
72 </literallayout></blockquote>
73 That is, some blocktype, see below for a list of the different
74 block types, and then enclosed in braces you have zero or more
75 lines that each have the previously described <emphasis>option
76 value</emphasis> format. Different block types have different
77 rules for which options can be specified, they are listed
78 below. The rules regarding white space, comments and quotes are
79 as above. Hence you may do things like:
80 <blockquote><literallayout>
83 option "value with space"
86 </literallayout></blockquote>
89 Option value characters can also be written in hex. This is done
90 by writing the character <literal>%</literal> followed by two
91 hexadecimal digits. If a <literal>%</literal> is used without
92 two following hexadecimal digits, the <literal>%</literal> and
93 the following characters are used as written. If you want to
94 write a <literal>%</literal> and not use this decoding, you may
95 of course write <literal>%</literal> in hex; i.e.,
96 <literal>%25</literal>.
99 There is one special option that can be used both as a basic
100 option and inside all blocks. That is the option
101 <literal>Include</literal> where the value specifies files to be
102 included. The value can be a single file, or it can use normal
103 shell globbing to specify multiple files, e.g.:
106 include /etc/radsecproxy.conf.d/*.conf
109 The files are sorted alphabetically. Included files are read in
110 the order they are specified, when reaching the end of a file,
111 the next file is read. When reaching the end of the last
112 included file, the proxy returns to read the next line following
113 the <literal>Include</literal> option. Included files may again
118 <title>Basic Options</title>
120 The following basic options may be specified in the
121 configuration file. Note that blocktypes and options inside
122 blocks are discussed later. Note that none of these options are
123 required, and indeed in many cases they are not needed. Note
124 that you should specify each at most once. The behaviour with
125 multiple occurences is undefined.
129 <term><literal>LogLevel</literal></term>
132 This option specifies the debug level. It must be set to
133 1, 2, 3, 4 or 5, where 1 logs only serious errors, and 5
134 logs everything. The default is 2 which logs errors,
135 warnings and a few informational messages. Note that the
136 command line option <option>-d</option> overrides this.
141 <term><literal>LogDestination</literal></term>
144 This specifies where the log messages should go. By
145 default the messages go to syslog with facility
146 <literal>LOG_DAEMON</literal>. Using this option you can
147 specify another syslog facility, or you may specify that
148 logging should be to a particular file, not using
149 syslog. The value must be either a file or syslog URL. The
150 file URL is the standard one, specifying a local file that
151 should be used. For syslog, you must use the syntax:
152 <literal>x-syslog:///FACILITY</literal> where
153 <literal>FACILITY</literal> must be one of
154 <literal>LOG_DAEMON</literal>,
155 <literal>LOG_MAIL</literal>, <literal>LOG_USER</literal>,
156 <literal>LOG_LOCAL0</literal>,
157 <literal>LOG_LOCAL1</literal>,
158 <literal>LOG_LOCAL2</literal>,
159 <literal>LOG_LOCAL3</literal>,
160 <literal>LOG_LOCAL4</literal>,
161 <literal>LOG_LOCAL5</literal>,
162 <literal>LOG_LOCAL6</literal> or
163 <literal>LOG_LOCAL7</literal>. You may omit the facility
164 from the URL to specify logging to the default facility,
165 but this is not very useful since this is the default log
166 destination. Note that this option is ignored if
167 <option>-f</option> is specified on the command line.
173 <term><literal>FTicksReporting</literal></term>
176 The FTicksReporting option is used to enable F-Ticks
177 logging and can be set to <literal>None</literal>,
178 <literal>Basic</literal> or <literal>Full</literal>. Its
179 default value is <literal>None</literal>. If
180 FTicksReporting is set to anything other than
181 <literal>None</literal>, note that the default value for
182 FTicksMAC is <literal>VendorKeyHashed</literal> which
183 needs FTicksKey to be set.
186 See <literal>radsecproxy.conf-example</literal> for
187 details. Note that radsecproxy has to be configured with
188 F-Ticks support (<literal>--enable-fticks</literal>) for
189 this option to have any effect.
195 <term><literal>FTicksMAC</literal></term>
198 The FTicksMAC option can be used to control if and how
199 Calling-Station-Id (the users Ethernet MAC address) is
200 being logged. It can be set to one of
201 <literal>Static</literal>, <literal>Original</literal>,
202 <literal>VendorHashed</literal>,
203 <literal>VendorKeyHashed</literal>,
204 <literal>FullyHashed</literal> or
205 <literal>FullyKeyHashed</literal>.
208 The default value for FTicksMAC is
209 <literal>VendorKeyHashed</literal>. This means that
210 FTicksKey has to be set.
212 Before chosing any of <literal>Original</literal>,
213 <literal>FullyHashed</literal> or
214 <literal>VendorHashed</literal>, consider the implications
215 for user privacy when MAC addresses are collected. How
216 will the logs be stored, transferred and accessed?
220 See <literal>radsecproxy.conf-example</literal> for
221 details. Note that radsecproxy has to be configured with
222 F-Ticks support (<literal>--enable-fticks</literal>) for
223 this option to have any effect.
229 <term><literal>FTicksKey</literal></term>
232 The FTicksKey option is used to specify the key to use
233 when producing HMAC's as an effect of specifying
234 VendorKeyHashed or FullyKeyHashed for the FTicksMAC
238 Note that radsecproxy has to be configured with F-Ticks
239 support (<literal>--enable-fticks</literal>) for this
240 option to have any effect.
246 <term><literal>FTicksSyslogFacility</literal></term>
249 The FTicksSyslogFacility option is used to specify a
250 dedicated syslog facility for F-Ticks messages. This
251 allows for easier filtering of F-Ticks messages. If no
252 FTicksSyslogFacility option is given, F-Ticks messages are
253 written to what the LogDestination option specifies.
256 F-Ticks messages are always logged using the log level
257 LOG_DEBUG. Note that specifying a file in
258 FTicksSyslogFacility (using the file:/// prefix) is
265 <term><literal>ListenUDP</literal></term>
268 Normally the proxy will listen to the standard RADIUS UDP
269 port <literal>1812</literal> if configured to handle UDP
270 clients. On most systems it will do this for all of the
271 system's IP addresses (both IPv4 and IPv6). On some
272 systems however, it may respond to only IPv4 or only
273 IPv6. To specify an alternate port you may use a value on
274 the form <literal>*:port</literal> where port is any valid
275 port number. If you also want to specify a specific
277 e.g. <literal>192.168.1.1:1812</literal> or
278 <literal>[2001:db8::1]:1812</literal>. The port may be
279 omitted if you want the default one (like in these
280 examples). These examples are equivalent to
281 <literal>192.168.1.1</literal> and
282 <literal>2001:db8::1</literal>. Note that you must use
283 brackets around the IPv6 address. This option may be
284 specified multiple times to listen to multiple addresses
290 <term><literal>ListenTCP</literal></term>
293 This option is similar to the <literal>ListenUDP</literal>
294 option, except that it is used for receiving connections
295 from TCP clients. The default port number is
296 <literal>1812</literal>.
301 <term><literal>ListenTLS</literal></term>
304 This is similar to the <literal>ListenUDP</literal>
305 option, except that it is used for receiving connections
306 from TLS clients. The default port number is
307 <literal>2083</literal>. Note that this option was
308 previously called <literal>ListenTCP</literal>.
313 <term><literal>ListenDTLS</literal></term>
316 This is similar to the <literal>ListenUDP</literal>
317 option, except that it is used for receiving connections
318 from DTLS clients. The default port number is
319 <literal>2083</literal>.
324 <term><literal>SourceUDP</literal></term>
327 This can be used to specify source address and/or source
328 port that the proxy will use for sending UDP client
329 messages (e.g. Access Request).
334 <term><literal>SourceTCP</literal></term>
337 This can be used to specify source address and/or source
338 port that the proxy will use for TCP connections.
343 <term><literal>SourceTLS</literal></term>
346 This can be used to specify source address and/or source
347 port that the proxy will use for TLS connections.
352 <term><literal>SourceDTLS</literal></term>
355 This can be used to specify source address and/or source
356 port that the proxy will use for DTLS connections.
361 <term><literal>TTLAttribute</literal></term>
364 This can be used to change the default TTL attribute. Only
365 change this if you know what you are doing. The syntax is
366 either a numerical value denoting the TTL attribute, or
367 two numerical values separated by column specifying a
369 i.e. <literal>vendorid:attribute</literal>.
374 <term><literal>AddTTL</literal></term>
377 If a TTL attribute is present, the proxy will decrement
378 the value and discard the message if zero. Normally the
379 proxy does nothing if no TTL attribute is present. If you
380 use the AddTTL option with a value 1-255, the proxy will
381 when forwarding a message with no TTL attribute, add one
382 with the specified value. Note that this option can also
383 be specified for a client/server. It will then override
384 this setting when forwarding a message to that
390 <term><literal>LoopPrevention</literal></term>
393 This can be set to <literal>on</literal> or
394 <literal>off</literal> with <literal>off</literal> being
395 the default. When this is enabled, a request will never be
396 sent to a server named the same as the client it was
397 received from. I.e., the names of the client block and the
398 server block are compared. Note that this only gives
399 limited protection against loops. It can be used as a
400 basic option and inside server blocks where it overrides
406 <term><literal>Include</literal></term>
409 This is not a normal configuration option; it can be
410 specified multiple times. It can both be used as a basic
411 option and inside blocks. For the full description, see
412 the configuration syntax section above.
419 <title>Blocks</title>
421 There are five types of blocks, they are
422 <literal>client</literal>, <literal>server</literal>,
423 <literal>realm</literal>, <literal>tls</literal> and
424 <literal>rewrite</literal>. At least one instance of each of
425 <literal>client</literal> and <literal>realm</literal> is
426 required. This is necessary for the proxy to do anything useful,
427 and it will exit if not. The <literal>tls</literal> block is
428 required if at least one TLS/DTLS client or server is
429 configured. Note that there can be multiple blocks for each
430 type. For each type, the block names should be unique. The
431 behaviour with multiple occurences of the same name for the same
432 block type is undefined. Also note that some block option values
433 may reference a block by name, in which case the block name must
434 be previously defined. Hence the order of the blocks may be
439 <title>Client Block</title>
441 The client block is used to configure a client. That is, tell
442 the proxy about a client, and what parameters should be used for
443 that client. The name of the client block must (with one
444 exception, see below) be either the IP address (IPv4 or IPv6) of
445 the client, an IP prefix (IPv4 or IPv6) on the form
446 IpAddress/PrefixLength, or a domain name (FQDN). Note that
447 literal IPv6 addresses must be enclosed in brackets.
450 If a domain name is specified, then this will be resolved
451 immediately to all the addresses associated with the name, and
452 the proxy will not care about any possible DNS changes that
453 might occur later. Hence there is no dependency on DNS after
457 When some client later sends a request to the proxy, the proxy
458 will look at the IP address the request comes from, and then go
459 through all the addresses of each of the configured clients (in
460 the order they are defined), to determine which (if any) of the
464 In the case of TLS/DTLS, the name of the client must match the
465 FQDN or IP address in the client certificate. Note that this is
466 not required when the client name is an IP prefix.
469 Alternatively one may use the <literal>host</literal> option
470 inside a client block. In that case, the value of the
471 <literal>host</literal> option is used as above, while the name
472 of the block is only used as a descriptive name for the
473 administrator. The host option may be used multiple times, and
474 can be a mix of addresses, FQDNs and prefixes.
477 The allowed options in a client block are
478 <literal>host</literal>, <literal>type</literal>,
479 <literal>secret</literal>, <literal>tls</literal>,
480 <literal>certificateNameCheck</literal>,
481 <literal>matchCertificateAttribute</literal>,
482 <literal>duplicateInterval</literal>, <literal>AddTTL</literal>,
483 <literal>fticksVISCOUNTRY</literal>, <literal>rewrite</literal>,
484 <literal>rewriteIn</literal>, <literal>rewriteOut</literal>, and
485 <literal>rewriteAttribute</literal>.
487 We already discussed the <literal>host</literal> option. The
488 value of <literal>type</literal> must be one of
489 <literal>udp</literal>, <literal>tcp</literal>,
490 <literal>tls</literal> or <literal>dtls</literal>. The value of
491 <literal>secret</literal> is the shared RADIUS key used with
492 this client. If the secret contains whitespace, the value must
493 be quoted. This option is optional for TLS/DTLS and if omitted
494 will default to "mysecret". Note that the default value of
495 <literal>secret</literal> will change in an upcoming release.
498 For a TLS/DTLS client you may also specify the
499 <literal>tls</literal> option. The option value must be the
500 name of a previously defined TLS block. If this option is not
501 specified, the TLS block with the name
502 <literal>defaultClient</literal> will be used if defined. If not
503 defined, it will try to use the TLS block named
504 <literal>default</literal>. If the specified TLS block name does
505 not exist, or the option is not specified and none of the
506 defaults exist, the proxy will exit with an error.
509 For a TLS/DTLS client, the option
510 <literal>certificateNameCheck</literal> can be set to
511 <literal>off</literal>, to disable the default behaviour of
512 matching CN or SubjectAltName against the specified hostname or
516 Additional validation of certificate attributes can be done by
517 use of the <literal>matchCertificateAttribute</literal>
518 option. Currently one can only do some matching of CN and
519 SubjectAltName. For regexp matching on CN, one can use the value
520 <literal>CN:/regexp/</literal>. For SubjectAltName one can only
521 do regexp matching of the URI, this is specified as
522 <literal>SubjectAltName:URI:/regexp/</literal>. Note that
523 currently this option can only be specified once in a client
527 The <literal>duplicateInterval</literal> option can be used to
528 specify for how many seconds duplicate checking should be
529 done. If a proxy receives a new request within a few seconds of
530 a previous one, it may be treated the same if from the same
531 client, with the same authenticator etc. The proxy will then
532 ignore the new request (if it is still processing the previous
533 one), or returned a copy of the previous reply.
536 The <literal>AddTTL</literal> option is similar to the
537 <literal>AddTTL</literal> option used in the basic config. See
538 that for details. Any value configured here overrides the basic
539 one when sending messages to this client.
542 The <literal>fticksVISCOUNTRY</literal> option configures
543 clients eligible to F-Ticks logging as defined by the
544 <literal>FTicksReporting</literal> basic option.
547 The <literal>rewrite</literal> option is deprecated. Use
548 <literal>rewriteIn</literal> instead.
551 The <literal>rewriteIn</literal> option can be used to refer to
552 a rewrite block that specifies certain rewrite operations that
553 should be performed on incoming messages from the client. The
554 rewriting is done before other processing. For details, see the
555 rewrite block text below. Similarly to <literal>tls</literal>
556 discussed above, if this option is not used, there is a fallback
557 to using the <literal>rewrite</literal> block named
558 <literal>defaultClient</literal> if it exists; and if not, a
559 fallback to a block named <literal>default</literal>.
562 The <literal>rewriteOut</literal> option is used in the same way
563 as <literal>rewriteIn</literal>, except that it specifies
564 rewrite operations that should be performed on outgoing messages
565 to the client. The rewriting is done after other
566 processing. Also, there is no rewrite fallback if this option is
570 The <literal>rewriteAttribute</literal> option currently makes
571 it possible to specify that the User-Name attribute in a client
572 request shall be rewritten in the request sent by the proxy. The
573 User-Name attribute is written back to the original value if a
574 matching response is later sent back to the client. The value
575 must be on the form User-Name:/regexpmatch/replacement/. Example
579 rewriteAttribute User-Name:/^(.*)@local$/\1@example.com/
585 <title>Server Block</title>
587 The server block is used to configure a server. That is, tell
588 the proxy about a server, and what parameters should be used
589 when communicating with that server. The name of the server
590 block must (with one exception, see below) be either the IP
591 address (IPv4 or IPv6) of the server, or a domain name
592 (FQDN). If a domain name is specified, then this will be
593 resolved immediately to all the addresses associated with the
594 name, and the proxy will not care about any possible DNS changes
595 that might occur later. Hence there is no dependency on DNS
596 after startup. If the domain name resolves to multiple
597 addresses, then for UDP/DTLS the first address is used. For
598 TCP/TLS, the proxy will loop through the addresses until it can
599 connect to one of them. In the case of TLS/DTLS, the name of the
600 server must match the FQDN or IP address in the server
604 Alternatively one may use the <literal>host</literal> option
605 inside a server block. In that case, the value of the
606 <literal>host</literal> option is used as above, while the name
607 of the block is only used as a descriptive name for the
608 administrator. Note that multiple host options may be used. This
609 will then be treated as multiple names/addresses for the same
610 server. When initiating a TCP/TLS connection, all addresses of
611 all names may be attempted, but there is no failover between the
612 different host values. For failover one must use separate server
616 Note that the name of the block, or values of host options may
617 include a port number (separated with a column). This port
618 number will then override the default port or a port option in
619 the server block. Also note that literal IPv6 addresses must be
620 enclosed in brackets.
623 The allowed options in a server block are
624 <literal>host</literal>, <literal>port</literal>,
625 <literal>type</literal>, <literal>secret</literal>,
626 <literal>tls</literal>, <literal>certificateNameCheck</literal>,
627 <literal>matchCertificateAttribute</literal>,
628 <literal>AddTTL</literal>, <literal>rewrite</literal>,
629 <literal>rewriteIn</literal>, <literal>rewriteOut</literal>,
630 <literal>statusServer</literal>, <literal>retryCount</literal>,
631 <literal>retryInterval</literal>,
632 <literal>dynamicLookupCommand</literal> and
633 <literal>LoopPrevention</literal>.
636 We already discussed the <literal>host</literal> option. The
637 <literal>port</literal> option allows you to specify which port
638 number the server uses. The usage of <literal>type</literal>,
639 <literal>secret</literal>, <literal>tls</literal>,
640 <literal>certificateNameCheck</literal>,
641 <literal>matchCertificateAttribute</literal>,
642 <literal>AddTTL</literal>, <literal>rewrite</literal>,
643 <literal>rewriteIn</literal> and <literal>rewriteOut</literal>
644 are just as specified for the <literal>client block</literal>
645 above, except that <literal>defaultServer</literal> (and not
646 <literal>defaultClient</literal>) is the fallback for the
647 <literal>tls</literal>, <literal>rewrite</literal> and
648 <literal>rewriteIn</literal> options.
651 <literal>statusServer</literal> can be specified to enable the
652 use of status-server messages for this server. The value must be
653 either <literal>on</literal> or <literal>off</literal>. The
654 default when not specified, is <literal>off</literal>. If
655 statusserver is enabled, the proxy will during idle periods send
656 regular status-server messages to the server to verify that it
657 is alive. This should only be enabled if the server supports it.
660 The options <literal>retryCount</literal> and
661 <literal>retryInterval</literal> can be used to specify how many
662 times the proxy should retry sending a request and how long it
663 should wait between each retry. The defaults are 2 retries and
667 The option <literal>dynamicLookupCommand</literal> can be used
668 to specify a command that should be executed to dynamically
669 configure and use a server. The use of this feature will be
670 documented separately/later.
673 Using the <literal>LoopPrevention</literal> option here
674 overrides any basic setting of this option. See section
675 <literal>BASIC OPTIONS</literal> for details on this option.
679 <title>Realm Block</title>
681 When the proxy receives an Access-Request it needs to figure out
682 to which server it should be forwarded. This is done by looking
683 at the Username attribute in the request, and matching that
684 against the names of the defined realm blocks. The proxy will
685 match against the blocks in the order they are specified, using
686 the first match if any. If no realm matches, the proxy will
687 simply ignore the request. Each realm block specifies what the
688 server should do when a match is found. A realm block may
689 contain none, one or multiple <literal>server</literal> options,
690 and similarly <literal>accountingServer</literal> options. There
691 are also <literal>replyMessage</literal> and
692 <literal>accountingResponse</literal> options. We will discuss
696 <title>Realm block names and matching</title>
698 In the general case the proxy will look for a
699 <literal>@</literal> in the username attribute, and try to do
700 an exact case insensitive match between what comes after the
701 <literal>@</literal> and the name of the realm block. So if
702 you get a request with the attribute value
703 <literal>anonymous@example.com</literal>, the proxy will go
704 through the realm names in the order they are specified,
705 looking for a realm block named
706 <literal>example.com</literal>.
709 There are two exceptions to this, one is the realm name
710 <literal>*</literal> which means match everything. Hence if
711 you have a realm block named <literal>*</literal>, then it
712 will always match. This should then be the last realm block
713 defined, since any blocks after this would never be
714 checked. This is useful for having a default.
717 The other exception is regular expression matching. If the
718 realm name starts with a <literal>/</literal>, the name is
719 treated as an regular expression. A case insensitive regexp
720 match will then be done using this regexp on the value of the
721 entire Username attribute. Optionally you may also have a
722 trailing <literal>/</literal> after the regexp. So as an
723 example, if you want to use regexp matching the domain
724 <literal>example.com</literal> you could have a realm block
725 named <literal>/@example\\.com$</literal>. Optinally this can
726 also be written <literal>/@example\\.com$/</literal>. If you
727 want to match all domains under the <literal>.com</literal>
728 top domain, you could do <literal>/@.*\\.com$</literal>. Note
729 that since the matching is done on the entire attribute value,
730 you can also use rules like
731 <literal>/^[a-k].*@example\\.com$/</literal> to get some of
732 the users in this domain to use one server, while other users
733 could be matched by another realm block and use another
738 <title>Realm block options</title>
740 A realm block may contain none, one or multiple
741 <literal>server</literal> options. If defined, the values of
742 the <literal>server</literal> options must be the names of
743 previously defined server blocks. Normally requests will be
744 forwarded to the first server option defined. If there are
745 multiple server options, the proxy will do fail-over and use
746 the second server if the first is down. If the two first are
747 down, it will try the third etc. If say the first server comes
748 back up, it will go back to using that one. Currently
749 detection of servers being up or down is based on the use of
750 StatusServer (if enabled), and that TCP/TLS/DTLS connections
754 A realm block may also contain none, one or multiple
755 <literal>accountingServer</literal> options. This is used
756 exactly like the <literal>server</literal> option, except that
757 it is used for specifying where to send matching accounting
758 requests. The values must be the names of previously defined
759 server blocks. When multiple accounting servers are defined,
760 there is a failover mechanism similar to the one for the
761 <literal>server</literal> option.
764 If there is no <literal>server</literal> option, the proxy
765 will if <literal>replyMessage</literal> is specified, reply
766 back to the client with an Access Reject message. The message
767 contains a replyMessage attribute with the value as specified
768 by the <literal>replyMessage</literal> option. Note that this
769 is different from having no match since then the request is
770 simply ignored. You may wonder why this is useful. One example
771 is if you handle say all domains under say
772 <literal>.bv</literal>. Then you may have several realm blocks
773 matching the domains that exists, while for other domains
774 under <literal>.bv</literal> you want to send a reject. At the
775 same time you might want to send all other requests to some
776 default server. After the realms for the subdomains, you would
777 then have two realm definitions. One with the name
778 <literal>/@.*\\.bv$</literal> with no servers, followed by one
779 with the name <literal>*</literal> with the default server
780 defined. This may also be useful for blocking particular
784 If there is no <literal>accountingServer</literal> option, the
785 proxy will normally do nothing, ignoring accounting
786 requests. There is however an option called
787 <literal>accountingResponse</literal>. If this is set to
788 <literal>on</literal>, the proxy will log some of the
789 accounting information and send an Accounting-Response
790 back. This is useful if you do not care much about accounting,
791 but want to stop clients from retransmitting accounting
792 requests. By default this option is set to
793 <literal>off</literal>.
798 <title>TLS Block</title>
800 The TLS block specifies TLS configuration options and you need
801 at least one of these if you have clients or servers using
802 TLS/DTLS. As discussed in the client and server block
803 descriptions, a client or server block may reference a
804 particular TLS block by name. There are also however the special
805 TLS block names <literal>default</literal>,
806 <literal>defaultClient</literal> and
807 <literal>defaultServer</literal> which are used as defaults if
808 the client or server block does not reference a TLS block. Also
809 note that a TLS block must be defined before the client or
810 server block that would use it. If you want the same TLS
811 configuration for all TLS/DTLS clients and servers, you need
812 just a single tls block named <literal>default</literal>, and
813 the client and servers need not refer to it. If you want all
814 TLS/DTLS clients to use one config, and all TLS/DTLS servers to
815 use another, then you would be fine only defining two TLS blocks
816 named <literal>defaultClient</literal> and
817 <literal>defaultServer</literal>. If you want different clients
818 (or different servers) to have different TLS parameters, then
819 you may need to create other TLS blocks with other names, and
820 reference those from the client or server definitions. Note that
821 you could also have say a client block refer to a default, even
822 <literal>defaultServer</literal> if you really want to.
825 The available TLS block options are
826 <literal>CACertificateFile</literal>,
827 <literal>CACertificatePath</literal>,
828 <literal>certificateFile</literal>,
829 <literal>certificateKeyFile</literal>,
830 <literal>certificateKeyPassword</literal>,
831 <literal>cacheExpiry</literal>, <literal>CRLCheck</literal> and
832 <literal>policyOID</literal>. When doing RADIUS over TLS/DTLS,
833 both the client and the server present certificates, and they
834 are both verified by the peer. Hence you must always specify
835 <literal>certificateFile</literal> and
836 <literal>certificateKeyFile</literal> options, as well as
837 <literal>certificateKeyPassword</literal> if a password is
838 needed to decrypt the private key. Note that
839 <literal>CACertificateFile</literal> may be a certificate
840 chain. In order to verify certificates, or send a chain of
841 certificates to a peer, you also always need to specify
842 <literal>CACertificateFile</literal> or
843 <literal>CACertificatePath</literal>. Note that you may specify
844 both, in which case the certificates in
845 <literal>CACertificateFile</literal> are checked first. By
846 default CRLs are not checked. This can be changed by setting
847 <literal>CRLCheck</literal> to <literal>on</literal>. One can
848 require peer certificates to adhere to certain policies by
849 specifying one or multiple policyOIDs using one or multiple
850 <literal>policyOID</literal> options.
853 CA certificates and CRLs are normally cached permanently. That
854 is, once a CA or CRL has been read, the proxy will never attempt
855 to re-read it. CRLs may change relatively often and the proxy
856 should ideally always use the latest CRLs. Rather than
857 restarting the proxy, there is an option
858 <literal>cacheExpiry</literal> that specifies how many seconds
859 the CA and CRL information should be cached. Reasonable values
860 might be say 3600 (1 hour) or 86400 (24 hours), depending on how
861 frequently CRLs are updated and how critical it is to be up to
862 date. This option may be set to zero to disable caching.
866 <title>Rewrite Block</title>
868 The rewrite block specifies rules that may rewrite RADIUS
869 messages. It can be used to add, remove and modify specific
870 attributes from messages received from and sent to clients and
871 servers. As discussed in the client and server block
872 descriptions, a client or server block may reference a
873 particular rewrite block by name. There are however also the
874 special rewrite block names <literal>default</literal>,
875 <literal>defaultClient</literal> and
876 <literal>defaultServer</literal> which are used as defaults if
877 the client or server block does not reference a block. Also note
878 that a rewrite block must be defined before the client or server
879 block that would use it. If you want the same rewrite rules for
880 input from all clients and servers, you need just a single
881 rewrite block named <literal>default</literal>, and the client
882 and servers need not refer to it. If you want all clients to use
883 one config, and all servers to use another, then you would be
884 fine only defining two rewrite blocks named
885 <literal>defaultClient</literal> and
886 <literal>defaultServer</literal>. Note that these defaults are
887 only used for rewrite on input. No rewriting is done on output
888 unless explicitly specifed using the
889 <literal>rewriteOut</literal> option.
892 The available rewrite block options are
893 <literal>addAttribute</literal>,
894 <literal>addVendorAttribute</literal>,
895 <literal>removeAttribute</literal>,
896 <literal>removeVendorAttribute</literal> and
897 <literal>modifyAttribute</literal>. They can all be specified
898 none, one or multiple times.
901 <literal>addAttribute</literal> is used to add attributes to a
902 message. The option value must be on the form
903 <literal>attribute:value</literal> where attribute is a
904 numerical value specifying the attribute. Simliarly, the
905 <literal>addVendorAttribute</literal> is used to specify a
906 vendor attribute to be added. The option value must be on the
907 form <literal>vendor:subattribute:value</literal>, where vendor
908 and subattribute are numerical values.
911 The <literal>removeAttribute</literal> option is used to specify
912 an attribute that should be removed from received messages. The
913 option value must be a numerical value specifying which
914 attribute is to be removed. Similarly,
915 <literal>removeVendorAttribute</literal> is used to specify a
916 vendor attribute that is to be removed. The value can be a
917 numerical value for removing all attributes from a given vendor,
918 or on the form <literal>vendor:subattribute</literal>, where
919 vendor and subattribute are numerical values, for removing a
920 specific subattribute for a specific vendor.
923 <literal>modifyAttribute</literal> is used to specify
924 modification of attributes. The value must be on the form
925 <literal>attribute:/regexpmatch/replacement/</literal> where
926 attribute is a numerical attribute type, regexpmatch is regexp
927 matching rule and replacement specifies how to replace the
928 matching regexp. Example usage:
931 modifyAttribute 1:/^(.*)@local$/\1@example.com/
937 <title>See Also</title>
940 <refentrytitle>radsecproxy</refentrytitle><manvolnum>1</manvolnum>
942 <ulink url="http://tools.ietf.org/html/draft-ietf-radext-radsec">
943 <citetitle>RadSec internet draft</citetitle>