1 Summary: High-performance and highly configurable free RADIUS server
5 License: GPLv2+ and LGPLv2+
6 Group: System Environment/Daemons
7 URL: http://www.freeradius.org/
9 Source0: ftp://ftp.freeradius.org/pub/radius/freeradius-server-%{version}.tar.bz2
10 Source100: freeradius-radiusd-init
11 Source102: freeradius-logrotate
12 Source103: freeradius-pam-conf
14 Patch1: freeradius-cert-config.patch
16 Obsoletes: freeradius-devel
17 Obsoletes: freeradius-libs
19 %define docdir %{_docdir}/freeradius-%{version}
20 %define initddir %{?_initddir:%{_initddir}}%{!?_initddir:%{_initrddir}}
22 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
24 BuildRequires: autoconf
25 BuildRequires: gdbm-devel
26 BuildRequires: libtool
27 BuildRequires: libtool-ltdl-devel
28 BuildRequires: openssl-devel
29 BuildRequires: pam-devel
30 BuildRequires: zlib-devel
31 BuildRequires: net-snmp-devel
32 BuildRequires: net-snmp-utils
33 BuildRequires: readline-devel
34 BuildRequires: libpcap-devel
36 Requires(pre): shadow-utils glibc-common
37 Requires(post): /sbin/chkconfig
38 Requires(preun): /sbin/chkconfig
41 The FreeRADIUS Server Project is a high performance and highly configurable
42 GPL'd free RADIUS server. The server is similar in some respects to
43 Livingston's 2.0 server. While FreeRADIUS started as a variant of the
44 Cistron RADIUS server, they don't share a lot in common any more. It now has
45 many more features than Cistron or Livingston, and is much more configurable.
47 FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
48 protocol, as defined in RFC 2865 (and others). It allows Network Access
49 Servers (NAS boxes) to perform authentication for dial-up users. There are
50 also RADIUS clients available for Web servers, firewalls, Unix logins, and
51 more. Using RADIUS allows authentication and authorization for a network to
52 be centralized, and minimizes the amount of re-configuration which has to be
53 done when adding or deleting new users.
56 Group: System Environment/Daemons
57 Summary: FreeRADIUS utilities
58 Requires: %{name} = %{version}-%{release}
59 Requires: libpcap >= 0.9.4
62 The FreeRADIUS server has a number of features found in other servers,
63 and additional features not found in any other server. Rather than
64 doing a feature by feature comparison, we will simply list the features
65 of the server, and let you decide if they satisfy your needs.
67 Support for RFC and VSA Attributes Additional server configuration
68 attributes Selecting a particular configuration Authentication methods
71 Summary: LDAP support for freeradius
72 Group: System Environment/Daemons
73 Requires: %{name} = %{version}-%{release}
74 BuildRequires: openldap-devel
77 This plugin provides the LDAP support for the FreeRADIUS server project.
80 Summary: Kerberos 5 support for freeradius
81 Group: System Environment/Daemons
82 Requires: %{name} = %{version}-%{release}
83 BuildRequires: krb5-devel
86 This plugin provides the Kerberos 5 support for the FreeRADIUS server project.
89 Summary: Perl support for freeradius
90 Group: System Environment/Daemons
91 Requires: %{name} = %{version}-%{release}
92 Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
93 %{?fedora:BuildRequires: perl-devel}
98 BuildRequires: perl-devel
100 BuildRequires: perl(ExtUtils::Embed)
103 This plugin provides the Perl support for the FreeRADIUS server project.
106 Summary: Python support for freeradius
107 Group: System Environment/Daemons
108 Requires: %{name} = %{version}-%{release}
109 BuildRequires: python-devel
112 This plugin provides the Python support for the FreeRADIUS server project.
115 Summary: MySQL support for freeradius
116 Group: System Environment/Daemons
117 Requires: %{name} = %{version}-%{release}
118 BuildRequires: mysql-devel
121 This plugin provides the MySQL support for the FreeRADIUS server project.
124 Summary: Postgresql support for freeradius
125 Group: System Environment/Daemons
126 Requires: %{name} = %{version}-%{release}
127 BuildRequires: postgresql-devel
129 %description postgresql
130 This plugin provides the postgresql support for the FreeRADIUS server project.
133 Summary: Unix ODBC support for freeradius
134 Group: System Environment/Daemons
135 Requires: %{name} = %{version}-%{release}
136 BuildRequires: unixODBC-devel
138 %description unixODBC
139 This plugin provides the unixODBC support for the FreeRADIUS server project.
143 %setup -q -n freeradius-server-%{version}
144 %patch1 -p1 -b .cert-config
145 # Some source files mistakenly have execute permissions set
146 find $RPM_BUILD_DIR/freeradius-server-%{version} \( -name '*.c' -o -name '*.h' \) -a -perm /0111 -exec chmod a-x {} +
150 export CFLAGS="$RPM_OPT_FLAGS -fPIC"
152 export CFLAGS="$RPM_OPT_FLAGS -fpic"
156 --libdir=%{_libdir}/freeradius \
157 --with-system-libtool \
158 --disable-ltdl-install \
162 --with-docdir=%{docdir} \
163 --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
164 --with-rlm-sql-postgresql-lib-dir=%{_libdir} \
165 --with-rlm-sql_mysql-include-dir=/usr/include/mysql \
166 --with-mysql-lib-dir=%{_libdir}/mysql \
167 --with-unixodbc-lib-dir=%{_libdir} \
168 --with-rlm-dbm-lib-dir=%{_libdir} \
169 --with-rlm-krb5-include-dir=/usr/kerberos/include \
170 --with-modules="rlm_wimax" \
171 --without-rlm_eap_ikev2 \
172 --without-rlm_sql_iodbc \
173 --without-rlm_sql_firebird \
174 --without-rlm_sql_db2 \
175 --without-rlm_sql_oracle
177 %if "%{_lib}" == "lib64"
178 perl -pi -e 's:sys_lib_search_path_spec=.*:sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64":' libtool
184 rm -rf $RPM_BUILD_ROOT
185 mkdir -p $RPM_BUILD_ROOT/var/run/radiusd
186 mkdir -p $RPM_BUILD_ROOT/var/lib/radiusd
187 # fix for bad libtool bug - can not rebuild dependent libs and bins
188 #FIXME export LD_LIBRARY_PATH=$RPM_BUILD_ROOT/%{_libdir}
189 make install R=$RPM_BUILD_ROOT
190 # modify default configuration
191 RADDB=$RPM_BUILD_ROOT%{_sysconfdir}/raddb
192 perl -i -pe 's/^#user =.*$/user = radiusd/' $RADDB/radiusd.conf
193 perl -i -pe 's/^#group =.*$/group = radiusd/' $RADDB/radiusd.conf
195 mkdir -p $RPM_BUILD_ROOT/var/log/radius/radacct
196 touch $RPM_BUILD_ROOT/var/log/radius/{radutmp,radius.log}
198 install -D -m 755 %{SOURCE100} $RPM_BUILD_ROOT/%{initddir}/radiusd
199 install -D -m 644 %{SOURCE102} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/radiusd
200 install -D -m 644 %{SOURCE103} $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/radiusd
202 # remove unneeded stuff
204 rm -f $RPM_BUILD_ROOT/usr/sbin/rc.radiusd
205 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.a
206 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.la
207 rm -rf $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sql/mssql
208 rm -rf $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sql/oracle
209 rm -rf $RPM_BUILD_ROOT/%{_datadir}/dialup_admin/sql/oracle
210 rm -rf $RPM_BUILD_ROOT/%{_datadir}/dialup_admin/lib/sql/oracle
211 rm -rf $RPM_BUILD_ROOT/%{_datadir}/dialup_admin/lib/sql/drivers/oracle
213 # remove header files, we don't ship a devel package and the
214 # headers have multilib conflicts
215 rm -rf $RPM_BUILD_ROOT/%{_includedir}
217 # remove unsupported config files
218 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/experimental.conf
220 # install doc files omitted by standard install
221 for f in COPYRIGHT CREDITS INSTALL README; do
222 cp $f $RPM_BUILD_ROOT/%{docdir}
224 cp LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.gpl
225 cp src/lib/LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.lgpl
226 cp src/LICENSE.openssl $RPM_BUILD_ROOT/%{docdir}/LICENSE.openssl
228 # add Red Hat specific documentation
229 cat >> $RPM_BUILD_ROOT/%{docdir}/REDHAT << EOF
231 Red Hat, RHEL, Fedora, and CentOS specific information can be found on the
232 FreeRADIUS Wiki in the Red Hat FAQ.
234 http://wiki.freeradius.org/Red_Hat_FAQ
236 Please reference that document.
241 rm -rf $RPM_BUILD_ROOT
245 # Make sure our user/group is present prior to any package or subpackage installation
247 getent group radiusd >/dev/null || /usr/sbin/groupadd -r -g 95 radiusd
248 getent passwd radiusd >/dev/null || /usr/sbin/useradd -r -g radiusd -u 95 -c "radiusd user" -s /sbin/nologin radiusd > /dev/null 2>&1
253 /sbin/chkconfig --add radiusd
254 if [ ! -e /etc/raddb/certs/server.pem ]; then
255 /sbin/runuser -g radiusd -c 'umask 007; /etc/raddb/certs/bootstrap' > /dev/null 2>&1 || :
261 /sbin/service radiusd stop > /dev/null 2>&1
262 /sbin/chkconfig --del radiusd
267 if [ $1 -ge 1 ]; then
268 /sbin/service radiusd condrestart >/dev/null 2>&1 || :
273 %defattr(-,root,root)
275 %config(noreplace) %{_sysconfdir}/pam.d/radiusd
276 %config(noreplace) %{_sysconfdir}/logrotate.d/radiusd
278 %dir %attr(755,radiusd,radiusd) /var/lib/radiusd
280 %dir %attr(755,root,radiusd) /etc/raddb
281 %defattr(-,root,radiusd)
282 %attr(644,root,radiusd) %config(noreplace) /etc/raddb/dictionary
283 %config(noreplace) /etc/raddb/acct_users
284 %config(noreplace) /etc/raddb/attrs
285 %config(noreplace) /etc/raddb/attrs.access_challenge
286 %config(noreplace) /etc/raddb/attrs.access_reject
287 %config(noreplace) /etc/raddb/attrs.accounting_response
288 %config(noreplace) /etc/raddb/attrs.pre-proxy
289 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/clients.conf
290 %config(noreplace) /etc/raddb/hints
291 %config(noreplace) /etc/raddb/huntgroups
292 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sqlippool.conf
293 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/preproxy_users
294 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/proxy.conf
295 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/radiusd.conf
296 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql.conf
297 %dir %attr(750,root,radiusd) /etc/raddb/sql
298 #%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/oracle/*
299 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/users
300 %dir %attr(770,root,radiusd) /etc/raddb/certs
301 %config(noreplace) /etc/raddb/certs/Makefile
302 %config(noreplace) /etc/raddb/certs/README
303 %config(noreplace) /etc/raddb/certs/xpextensions
304 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/*.cnf
305 %attr(750,root,radiusd) /etc/raddb/certs/bootstrap
306 %dir %attr(750,root,radiusd) /etc/raddb/sites-available
307 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/*
308 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
309 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-enabled/*
310 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/eap.conf
311 %config(noreplace) %attr(640,root,radiusd) /etc/raddb/example.pl
312 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.conf
313 %config(noreplace) /etc/raddb/policy.txt
314 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/templates.conf
315 %dir %attr(750,root,radiusd) /etc/raddb/modules
316 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/*
317 %dir %attr(755,radiusd,radiusd) /var/run/radiusd/
319 %defattr(-,root,root)
326 %doc %{_mandir}/man5/acct_users.5.gz
327 %doc %{_mandir}/man5/clients.conf.5.gz
328 %doc %{_mandir}/man5/dictionary.5.gz
329 %doc %{_mandir}/man5/radiusd.conf.5.gz
330 %doc %{_mandir}/man5/radrelay.conf.5.gz
331 %doc %{_mandir}/man5/rlm_acct_unique.5.gz
332 %doc %{_mandir}/man5/rlm_always.5.gz
333 %doc %{_mandir}/man5/rlm_attr_filter.5.gz
334 %doc %{_mandir}/man5/rlm_attr_rewrite.5.gz
335 %doc %{_mandir}/man5/rlm_chap.5.gz
336 %doc %{_mandir}/man5/rlm_counter.5.gz
337 %doc %{_mandir}/man5/rlm_detail.5.gz
338 %doc %{_mandir}/man5/rlm_digest.5.gz
339 %doc %{_mandir}/man5/rlm_expr.5.gz
340 %doc %{_mandir}/man5/rlm_files.5.gz
341 %doc %{_mandir}/man5/rlm_mschap.5.gz
342 %doc %{_mandir}/man5/rlm_pap.5.gz
343 %doc %{_mandir}/man5/rlm_passwd.5.gz
344 %doc %{_mandir}/man5/rlm_policy.5.gz
345 %doc %{_mandir}/man5/rlm_realm.5.gz
346 %doc %{_mandir}/man5/rlm_sql.5.gz
347 %doc %{_mandir}/man5/rlm_sql_log.5.gz
348 %doc %{_mandir}/man5/rlm_unix.5.gz
349 %doc %{_mandir}/man5/unlang.5.gz
350 %doc %{_mandir}/man5/users.5.gz
351 %doc %{_mandir}/man8/raddebug.8.gz
352 %doc %{_mandir}/man8/radiusd.8.gz
353 %doc %{_mandir}/man8/radmin.8.gz
354 %doc %{_mandir}/man8/radrelay.8.gz
355 %doc %{_mandir}/man8/radwatch.8.gz
357 %dir %attr(755,root,root) /usr/share/freeradius
358 /usr/share/freeradius/*
360 %dir %attr(700,radiusd,radiusd) /var/log/radius/
361 %dir %attr(700,radiusd,radiusd) /var/log/radius/radacct/
362 %ghost %attr(644,radiusd,radiusd) /var/log/radius/radutmp
363 %ghost %attr(600,radiusd,radiusd) /var/log/radius/radius.log
365 %attr(755,root,root) %{_libdir}/freeradius/lib*.so*
366 # RADIUS Loadable Modules
367 %dir %attr(755,root,root) %{_libdir}/freeradius
368 #%attr(755,root,root) %{_libdir}/freeradius/rlm_*.so*
369 #%{_libdir}/freeradius/rlm_acctlog*.so
370 %{_libdir}/freeradius/rlm_acct_unique.so
371 %{_libdir}/freeradius/rlm_acct_unique-%{version}.so
372 %{_libdir}/freeradius/rlm_acctlog.so
373 %{_libdir}/freeradius/rlm_acctlog-%{version}.so
374 %{_libdir}/freeradius/rlm_always.so
375 %{_libdir}/freeradius/rlm_always-%{version}.so
376 %{_libdir}/freeradius/rlm_attr_filter.so
377 %{_libdir}/freeradius/rlm_attr_filter-%{version}.so
378 %{_libdir}/freeradius/rlm_attr_rewrite.so
379 %{_libdir}/freeradius/rlm_attr_rewrite-%{version}.so
380 %{_libdir}/freeradius/rlm_chap.so
381 %{_libdir}/freeradius/rlm_chap-%{version}.so
382 %{_libdir}/freeradius/rlm_checkval.so
383 %{_libdir}/freeradius/rlm_checkval-%{version}.so
384 %{_libdir}/freeradius/rlm_copy_packet.so
385 %{_libdir}/freeradius/rlm_copy_packet-%{version}.so
386 %{_libdir}/freeradius/rlm_counter.so
387 %{_libdir}/freeradius/rlm_counter-%{version}.so
388 %{_libdir}/freeradius/rlm_dbm.so
389 %{_libdir}/freeradius/rlm_dbm-%{version}.so
390 %{_libdir}/freeradius/rlm_detail.so
391 %{_libdir}/freeradius/rlm_detail-%{version}.so
392 %{_libdir}/freeradius/rlm_digest.so
393 %{_libdir}/freeradius/rlm_digest-%{version}.so
394 %{_libdir}/freeradius/rlm_dynamic_clients.so
395 %{_libdir}/freeradius/rlm_dynamic_clients-%{version}.so
396 %{_libdir}/freeradius/rlm_eap.so
397 %{_libdir}/freeradius/rlm_eap-%{version}.so
398 %{_libdir}/freeradius/rlm_eap_gtc.so
399 %{_libdir}/freeradius/rlm_eap_gtc-%{version}.so
400 %{_libdir}/freeradius/rlm_eap_leap.so
401 %{_libdir}/freeradius/rlm_eap_leap-%{version}.so
402 %{_libdir}/freeradius/rlm_eap_md5.so
403 %{_libdir}/freeradius/rlm_eap_md5-%{version}.so
404 %{_libdir}/freeradius/rlm_eap_mschapv2.so
405 %{_libdir}/freeradius/rlm_eap_mschapv2-%{version}.so
406 %{_libdir}/freeradius/rlm_eap_peap.so
407 %{_libdir}/freeradius/rlm_eap_peap-%{version}.so
408 %{_libdir}/freeradius/rlm_eap_sim.so
409 %{_libdir}/freeradius/rlm_eap_sim-%{version}.so
410 %{_libdir}/freeradius/rlm_eap_tls.so
411 %{_libdir}/freeradius/rlm_eap_tls-%{version}.so
412 %{_libdir}/freeradius/rlm_eap_ttls.so
413 %{_libdir}/freeradius/rlm_eap_ttls-%{version}.so
414 %{_libdir}/freeradius/rlm_exec.so
415 %{_libdir}/freeradius/rlm_exec-%{version}.so
416 %{_libdir}/freeradius/rlm_expiration.so
417 %{_libdir}/freeradius/rlm_expiration-%{version}.so
418 %{_libdir}/freeradius/rlm_expr.so
419 %{_libdir}/freeradius/rlm_expr-%{version}.so
420 %{_libdir}/freeradius/rlm_fastusers.so
421 %{_libdir}/freeradius/rlm_fastusers-%{version}.so
422 %{_libdir}/freeradius/rlm_files.so
423 %{_libdir}/freeradius/rlm_files-%{version}.so
424 %{_libdir}/freeradius/rlm_ippool.so
425 %{_libdir}/freeradius/rlm_ippool-%{version}.so
426 %{_libdir}/freeradius/rlm_linelog.so
427 %{_libdir}/freeradius/rlm_linelog-%{version}.so
428 %{_libdir}/freeradius/rlm_logintime.so
429 %{_libdir}/freeradius/rlm_logintime-%{version}.so
430 %{_libdir}/freeradius/rlm_mschap.so
431 %{_libdir}/freeradius/rlm_mschap-%{version}.so
432 %{_libdir}/freeradius/rlm_otp.so
433 %{_libdir}/freeradius/rlm_otp-%{version}.so
434 %{_libdir}/freeradius/rlm_pam.so
435 %{_libdir}/freeradius/rlm_pam-%{version}.so
436 %{_libdir}/freeradius/rlm_pap.so
437 %{_libdir}/freeradius/rlm_pap-%{version}.so
438 %{_libdir}/freeradius/rlm_passwd.so
439 %{_libdir}/freeradius/rlm_passwd-%{version}.so
440 %{_libdir}/freeradius/rlm_policy.so
441 %{_libdir}/freeradius/rlm_policy-%{version}.so
442 %{_libdir}/freeradius/rlm_preprocess.so
443 %{_libdir}/freeradius/rlm_preprocess-%{version}.so
444 %{_libdir}/freeradius/rlm_radutmp.so
445 %{_libdir}/freeradius/rlm_radutmp-%{version}.so
446 %{_libdir}/freeradius/rlm_realm.so
447 %{_libdir}/freeradius/rlm_realm-%{version}.so
448 %{_libdir}/freeradius/rlm_replicate.so
449 %{_libdir}/freeradius/rlm_replicate-%{version}.so
450 %{_libdir}/freeradius/rlm_soh.so
451 %{_libdir}/freeradius/rlm_soh-%{version}.so
452 %{_libdir}/freeradius/rlm_sql.so
453 %{_libdir}/freeradius/rlm_sql-%{version}.so
454 %{_libdir}/freeradius/rlm_sql_log.so
455 %{_libdir}/freeradius/rlm_sql_log-%{version}.so
456 %{_libdir}/freeradius/rlm_sqlcounter.so
457 %{_libdir}/freeradius/rlm_sqlcounter-%{version}.so
458 %{_libdir}/freeradius/rlm_sqlippool.so
459 %{_libdir}/freeradius/rlm_sqlippool-%{version}.so
460 %{_libdir}/freeradius/rlm_unix.so
461 %{_libdir}/freeradius/rlm_unix-%{version}.so
462 %{_libdir}/freeradius/rlm_wimax.so
463 %{_libdir}/freeradius/rlm_wimax-%{version}.so
466 %defattr(-,root,root)
469 %doc %{_mandir}/man1/radclient.1.gz
470 %doc %{_mandir}/man1/radeapclient.1.gz
471 %doc %{_mandir}/man1/radlast.1.gz
472 %doc %{_mandir}/man1/radtest.1.gz
473 %doc %{_mandir}/man1/radwho.1.gz
474 %doc %{_mandir}/man1/radzap.1.gz
475 %doc %{_mandir}/man8/radsqlrelay.8.gz
476 %doc %{_mandir}/man8/rlm_ippool_tool.8.gz
479 %defattr(-,root,root)
480 %{_libdir}/freeradius/rlm_krb5.so
481 %{_libdir}/freeradius/rlm_krb5-%{version}.so
482 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/krb5
485 %defattr(-,root,root)
486 %{_libdir}/freeradius/rlm_perl.so
487 %{_libdir}/freeradius/rlm_perl-%{version}.so
490 %defattr(-,root,root)
491 %{_libdir}/freeradius/rlm_python.so
492 %{_libdir}/freeradius/rlm_python-%{version}.so
495 %defattr(-,root,root)
496 %dir %attr(750,root,radiusd) /etc/raddb/sql/mysql
497 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/mysql/*
498 %dir %attr(750,root,radiusd) /etc/raddb/sql/ndb
499 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/ndb/*
500 %{_libdir}/freeradius/rlm_sql_mysql.so
501 %{_libdir}/freeradius/rlm_sql_mysql-%{version}.so
504 %defattr(-,root,root)
505 %dir %attr(750,root,radiusd) /etc/raddb/sql/postgresql
506 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/postgresql/*
507 %{_libdir}/freeradius/rlm_sql_postgresql.so
508 %{_libdir}/freeradius/rlm_sql_postgresql-%{version}.so
511 %defattr(-,root,root)
512 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/ldap.attrmap
513 %{_libdir}/freeradius/rlm_ldap.so
514 %{_libdir}/freeradius/rlm_ldap-%{version}.so
515 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/ldap
518 %defattr(-,root,root)
519 %{_libdir}/freeradius/rlm_sql_unixodbc.so
520 %{_libdir}/freeradius/rlm_sql_unixodbc-%{version}.so
523 * Wed Sep 22 2010 John Dennis <jdennis@redhat.com> - 2.1.10-1
524 - upgrade to latest upstream release
526 * Install the "radcrypt" program.
527 * Enable radclient to send requests containing MS-CHAPv1
528 Send packets with: MS-CHAP-Password = "password". It will
529 be automatically converted to the correct MS-CHAP attributes.
530 * Added "-t" command-line option to radtest. You can use "-t pap",
531 "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap"
532 * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
533 This change and the previous one makes PEAP testing much easier.
534 * Added more documentation and examples for the "passwd" module.
535 * Added dictionaries for RFC 5607 and RFC 5904.
536 * Added note in proxy.conf that we recommend setting
537 "require_message_authenticator = yes" for all home servers.
538 * Added example of second "files" configuration, with documentation.
539 This shows how and where to use two instances of a module.
540 * Updated radsniff to have it write pcap files, too. See '-w'.
541 * Print out large WARNING message if we send an Access-Challenge
542 for EAP, and receive no follow-up messages from the client.
543 * Added Cached-Session-Policy for EAP session resumption. See
545 * Added support for TLS-Cert-* attributes. For details, see
546 raddb/sites-available/default, "post-auth" section.
547 * Added sample raddb/modules/{opendirectory,dynamic_clients}
548 * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
549 * Added RFCs 5607, 5904, and 5997.
550 * For EAP-TLS, client certificates can now be validated using an
551 external command. See eap.conf, "validate" subsection of "tls".
552 * Made rlm_pap aware of {nthash} prefix, for compatibility with
553 legacy RADIUS systems.
554 * Add Module-Failure-Message for mschap module (ntlm_auth)
555 * made rlm_sql_sqlite database configurable. Use "filename"
557 * Added %{tolower: ...string ... }, which returns the lowercase
558 version of the string.
561 * Fix endless loop when there are multiple sub-options for
563 * More debug output when sending / receiving DHCP packets.
564 * EAP-MSCHAPv2 should return the MPPE keys when used outside
565 of a TLS tunnel. This is needed for IKE.
566 * Added SSL "no ticket" option to prevent SSL from creating sessions
567 without IDs. We need the IDs, so this option should be set.
568 * Fix proxying of packets from inside a TTLS/PEAP tunnel.
570 * Allow IPv6 address attributes to be created from domain names
572 * Set the string length to the correct value when parsing double
573 quotes. Closes bug #88.
574 * No longer look users up in /etc/passwd in the default configuration.
575 This can be reverted by enabling "unix" in the "authorize" section.
576 * More #ifdef's to enable building on systems without certain
578 * Fixed SQL-Group comparison to register only if the group
580 * Fixed SQL-Group comparison to register <instance>-SQL-Group,
581 just like rlm_ldap. This lets you have multiple SQL group checks.
582 * Fix scanning of octal numbers in "unlang". Closes bug #89.
583 * Be less aggressive about freeing "stuck" requests. Closes bug #35.
584 * Fix example in "originate-coa" to refer to the correct packet.
585 * Change default timeout for dynamic clients to 1 hour, not 1 day.
586 * Allow passwd module to map IP addresses, too.
587 * Allow passwd module to be used for CoA packets
588 * Put boot filename into DHCP header when DHCP-Boot-Filename
590 * raddb/certs/Makefile no longer has certs depend on index.txt and
591 serial. Closes bug #64.
592 * Ignore NULL errorcode in PostgreSQL client. Closes bug #39
593 * Made Exec-Program and Exec-Program-Wait work in accounting
594 section again. See sites-available/default.
595 * Fix long-standing memory leak in esoteric conditions. Found
597 * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
598 This will automatically convert more passwords.
599 * Updated rlm_pap to decode Password-With-Header, if it was base64
600 encoded, and to treat the contents as potentially binary data.
601 * Fix Novell eDir code to use the right function parameters.
603 * Allow spaces to be escaped when executing external programs.
605 * Be less restrictive about checking permissions on control socket.
606 If we're root, allow connecting to a non-root socket.
607 * Remove control socket on normal server exit. If the server isn't
608 running, the control socket should not exist.
609 * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
610 calculations. It *MAY* be different (upper / lower case) from
611 the User-Name attribute. Closes bug #17.
612 * If the EAP-TLS methods have problems, more SSL errors are now
613 available in the Module-Failure-Message attribute.
614 * Update Oracle configure scripts. Closes bug #57.
615 * Added text to DESC fields of doc/examples/openldap.schema
616 * Updated more documentation to use "Restructured Text" format.
617 Thanks to James Lockie.
618 * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11.
619 * Return error for potential proxy loops when using "-XC"
620 * Produce better error messages when slow databases block
622 * Added notes on DHCP broadcast packets for FreeBSD.
623 * Fixed crash when parsing some date strings. Closes bug #98
624 * Improperly formatted Attributes are now printed as "Attr-##".
625 If they are not correct, they should not use the dictionary name.
626 * Fix rlm_digest to be check the format of the Digest attributes,
627 and return "noop" rather than "fail" if they're not right.
628 * Enable "digest" in raddb/sites-available/default. This change
629 enables digest authentication to work "out of the box".
630 * Be less aggressive about marking home servers as zombie.
631 If they are responding to some packets, they are still alive.
632 * Added Packet-Transmit-Counter, to track detail file retransmits.
634 * Added configure check for lt_dladvise_init(). If it exists, then
635 using it solves some issues related to libraries loading libraries.
636 * Added indexes to the MySQL IP Pool schema.
637 * Print WARNING message if too many attributes are put into a packet.
638 * Include dhcp test client (not built by default)
639 * Added checks for LDAP constraint violation. Closes bug #18.
640 * Change default raddebug timeout to 60 seconds.
641 * Made error / warning messages more consistent.
642 * Correct back-slash handling in variable expansion. Closes bug #46.
643 You SHOULD check your configuration for backslash expansion!
644 * Fix typo in "configure" script (--enable-libltdl-install)
645 * Use local libltdl in more situations. This helps to avoid
646 compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
647 * Fix hang on startup when multiple home servers were defined
648 with "src_ipaddr" field.
649 * Fix 32/64 bit issue in rlm_ldap. Closes bug #105.
650 * If the first "listen" section uses 127.0.0.1, don't use that
651 as the source IP for proxying. It won't work.
652 * When Proxy-To-Realm is set to a non-existent realm, the EAP module
653 should handle the request, rather than expecting it to be proxied.
654 * Fix IPv4 issues with udpfromto. Closes bug #110.
655 * Clean up child processes of raddebug. Closes bugs #108 and #109
656 * retry OTP if the OTP daemon fails. Closes bug #58.
657 * Multiple calls to ber_printf seem to work better. Closes #106.
658 * Fix "unlang" so that "attribute not found" is treated as a "false"
659 comparison, rather than a syntax error in the configuration.
662 * Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
663 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
665 * Tue Jun 01 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
666 - Mass rebuild with perl-5.12.0
668 * Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
669 - update to latest upstream, mainly bug fix release
671 * Add radmin command "stats detail <file>" to see what
672 is going on inside of a detail file reader.
673 * Added documentation for CoA. See raddb/sites-available/coa
674 * Add sub-option support for Option 82. See dictionary.dhcp
675 * Add "server" field to default SQL NAS table, and documented it.
678 * Reset "received ping" counter for Status-Server checks. In some
679 corner cases it was not getting reset.
680 * Handle large VMPS attributes.
681 * Count accounting responses from a home server in SNMP / statistics
683 * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
684 * radmin packet counter statistics are now unsigned, for numbers
685 2^31..2^32. After that they roll over to zero.
686 * Be more careful about expanding data in PAP and MS-CHAP modules.
687 This prevents login failures when passwords contain '{'.
688 * Clean up zombie children if there were many "exec" modules being
689 run for one packet, all with "wait = no".
690 * re-open log file after HUP. Closes bug #63.
691 * Fix "no response to proxied packet" complaint for Coa / Disconnect
692 packets. It shouldn't ignore replies to packets it sent.
693 * Calculate IPv6 netmasks correctly. Closes bug #69.
694 * Fix SQL module to re-open sockets if they unexpectedly close.
695 * Track scope for IPv6 addresses. This lets us use link-local
696 addresses properly. Closes bug #70.
697 * Updated Makefiles to no longer use the shell for recursing into
698 subdirs. "make -j 2" should now work.
699 * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
701 * Updated Makefiles so that "make reconfig" no longer uses the shell
702 for recursing into subdirs, and re-builds all "configure" files.
703 * Used above method to regenerate all configure scripts.
705 * Updated SQL module to allow "server" field of "nas" table
706 to be blank: "". This means the same as it being NULL.
707 * Fixed regex realm example. Create Realm attribute with value
708 of realm from User-Name, not from regex. Closes bug #40.
709 * If processing a DHCP Discover returns "fail / reject", ignore
710 the packet rather than sending a NAK.
711 * Allow '%' to be escaped in sqlcounter module.
712 * Fix typo internal hash table.
713 * For PEAP and TTLS, the tunneled reply is added to the reply,
714 rather than integrated via the operators. This allows multiple
715 VSAs to be added, where they would previously be discarded.
716 * Make request number unsigned. This changes nothing other than
717 the debug output when the server receives more than 2^31 packets.
718 * Don't block when reading child output in 'exec wait'. This means
719 that blocked children get killed, instead of blocking the server.
720 * Enabled building without any proxy functionality
721 * radclient now prefers IPv4, to match the default server config.
722 * Print useful error when a realm regex is invalid
723 * relaxed rules for preprocess module "with_cisco_vsa_hack". The
724 attributes can now be integer, ipaddr, etc. (i.e. non-string)
725 * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
727 * Update configure script for rlm_python to avoid dynamic linking
728 problems on some platforms.
729 * Work-around for bug #35
730 * Do suid to "user" when running in debug mode as root
731 * Make "allow_core_dumps" work in more situations.
732 * In detail file reader, treat bad records as EOF.
733 This allows it to continue working when the disk is full.
734 * Fix Oracle default accounting queries to work when there are no
735 gigawords attributes. Other databases already had the fix.
736 * Fix rlm_sql to show when it opens and closes sockets. It already
737 says when it cannot connect, so it should say when it can connect.
738 * "chmod -x" for a few C source files.
739 * Pull update spec files, etc. from RedHat into the redhat/ directory.
740 * Allow spaces when parsing integer values. This helps people who
741 put "too much" into an SQL value field.
743 * Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
744 - resolves: bug #526559 initial install should run bootstrap to create certificates
745 running radiusd in debug mode to generate inital temporary certificates
746 is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
747 rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
748 - resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
749 the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
750 were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months
752 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
753 - update to latest upstream
755 * Print more descriptive error message for too many EAP sessions.
756 This gives hints on what to do when "failed to store handler"
757 * Commands received from radmin are now printed on stdout when
759 * Allow accounting packets to be written to a detail file, even
760 if they were read from a different detail file.
761 * Added OpenSSL license exception (src/LICENSE.openssl)
764 * DHCP sockets can now set the broadcast flag before binding to a
765 socket. You need to set "broadcast = yes" in the DHCP listener.
766 * Be more restrictive on string parsing in the config files
767 * Fix password length in scripts/create-users.pl
768 * Be more flexible about parsing the detail file. This allows
769 it to read files where the attributes have been edited.
770 * Ensure that requests read from the detail file are cleaned up
771 (i.e. don't leak) if they are proxied without a response.
772 * Write the PID file after opening sockets, not before
774 * Proxying large numbers of packets no longer gives error
775 "unable to open proxy socket".
776 * Avoid mutex locks in libc after fork
777 * Retry packet from detail file if there was no response.
778 * Allow old-style dictionary formats, where the vendor name is the
779 last field in an ATTRIBUTE definition.
780 * Removed all recursive use of mutexes. Some systems just don't
782 * Allow !* to work as documented.
783 * make templates work (see templates.conf)
784 * Enabled "allow_core_dumps" to work again
785 * Print better errors when reading invalid dictionaries
786 * Sign client certificates with CA, rather than server certs.
787 * Fix potential crash in rlm_passwd when file was closed
788 * Fixed corner cases in conditional dynamic expansion.
789 * Use InnoDB for MySQL IP Pools, to gain transactional support
790 * Apply patch to libltdl for CVE-2009-3736.
791 * Fixed a few issues found by LLVM's static checker
792 * Keep track of "bad authenticators" for accounting packets
793 * Keep track of "dropped packets" for auth/acct packets
794 * Synced the "debian" directory with upstream
795 * Made "unlang" use unsigned 32-bit integers, to match the
798 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
799 - Remove devel subpackage. It doesn't make much sense to have a devel package since
800 we don't ship libraries and it produces multilib conflicts.
802 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
803 - more spec file clean up from review comments
804 - remove freeradius-libs subpackage, move libfreeradius-eap and
805 libfreeradius-radius into the main package
806 - fix subpackage requires, change from freeradius-libs to main package
807 - fix description of the devel subpackage, remove referene to non-shipped libs
808 - remove execute permissions on src files included in debuginfo
809 - remove unnecessary use of ldconfig
810 - since all sub-packages now require main package remove user creation for sub-packages
811 - also include the LGPL library license file in addition to the GPL license file
812 - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6
814 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
815 - fix various rpmlint issues.
817 * Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
818 - rebuild against perl 5.10.1
820 * Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
821 - resolves: bug #522111 non-conformant initscript
822 also change permission of /var/run/radiusd from 0700 to 0755
823 so that "service radiusd status" can be run as non-root
825 * Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
826 - use password-auth common PAM configuration instead of system-auth
828 * Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
829 - enable building of the rlm_wimax module
830 - pcap wire analysis support is enabled and available in utils subpackage
831 - Resolves bug #523053 radtest manpage in wrong package
832 - update to latest upstream release, from upstream Changelog:
834 * Full support for CoA and Disconnect packets as per RFC 3576
835 and RFC 5176. Both receiving and proxying CoA is supported.
836 * Added "src_ipaddr" configuration to "home_server". See
837 proxy.conf for details.
838 * radsniff now accepts -I, to read from a filename instead of
840 * radsniff also prints matching requests and any responses to those
841 requests when '-r' is used.
842 * Added example of attr_filter for Access-Challenge packets
843 * Added support for udpfromto in DHCP code
844 * radmin can now selectively mark modules alive/dead.
845 See "set module state".
846 * Added customizable messages on login success/fail.
847 See msg_goodpass && msg_badpass in log{} section of radiusd.conf
848 * Document "chase_referrals" and "rebind" in raddb/modules/ldap
849 * Preliminary implementation of DHCP relay.
850 * Made thread pool section optional. If it doesn't exist,
851 the server will run single-threaded.
852 * Added sample radrelay.conf for people upgrading from 1.x
853 * Made proxying more stable by failing over, rather than
854 rejecting the first request. See "response_window" in proxy.conf
855 * Allow home_server_pools to exist without realms.
856 * Add dictionary.iea (closes bug #7)
857 * Added support for RFC 5580
858 * Added experimental sql_freetds module from Gabriel Blanchard.
859 * Updated dictionary.foundry
860 * Added sample configuration for MySQL cluster in raddb/sql/ndb
861 See the README file for explanations.
863 * Fixed corner case where proxied packets could have extra
864 character in User-Password attribute. Fix from Niko Tyni.
865 * Extended size of "attribute" field in SQL to 64.
866 * Fixes to ruby module to be more careful about when it builds.
867 * Updated Perl module "configure" script to check for broken
869 * Fix "status_check = none". It would still send packets
871 * Set recursive flag on the proxy mutex, which enables safer
872 cleanup on some platforms.
873 * Copy the EAP username verbatim, rather than escaping it.
874 * Update handling so that robust-proxy-accounting works when
875 all home servers are down for extended periods of time.
876 * Look for DHCP option 53 anywhere in the packet, not just
878 * Fix processing of proxy fail handler with virtual servers.
879 * DHCP code now prints out correct src/dst IP addresses
880 when sending packets.
881 * Removed requirement for DHCP to have clients
882 * Fixed handling of DHCP packets with message-type buried in the packet
883 * Fixed corner case with negation in unlang.
884 * Minor fixes to default MySQL & PostgreSQL schemas
885 * Suppress MSCHAP complaints in debugging mode.
886 * Fix SQL module for multiple instance, and possible crash on HUP
887 * Fix permissions for radius.log for sites that change user/group,
888 but which don't create the file before starting radiusd.
889 * Fix double counting of packets when proxying
891 * Fix pthread keys in rlm_perl
892 * Log reasons for EAP failure (closes bug #8)
893 * Load home servers and pools that aren't referenced from a realm.
894 * Handle return codes from virtual attributes in "unlang"
895 (e.g. LDAP-Group). This makes "!(expr)" work for them.
896 * Enable VMPS to see contents of virtual server again
897 * Fix WiMAX module to be consistent with examples. (closes bug #10)
898 * Fixed crash with policies dependent on NAS-Port comparisons
899 * Allowed vendor IDs to be be higher than 32767.
900 * Fix crash on startup with certain regexes in "hints" file.
901 * Fix crash in attr_filter module when packets don't exist
902 * Allow detail file reader to be faster when "load_factor = 100"
903 * Add work-around for build failures with errors related to
904 lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
905 * Made ldap module "rebind" option aware of older, incompatible
906 versions of OpenLDAP.
907 * Check value of Fall-Through in attr_filter module.
909 * Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
910 - rebuilt with new openssl
912 * Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
913 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
915 * Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
916 - install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
918 * Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
919 - resolves bug #507571 freeradius packages do not check for user/group existence
921 * Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
922 - make /etc/raddb/sites-available/* be config(noreplace)
924 * Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
925 - update to latest upstream release, from upstream Changelog:
927 * radclient exits with 0 on successful (accept / ack), and 1
928 otherwise (no response / reject)
929 * Added support for %%{sql:UPDATE ..}, and insert/delete
930 Patch from Arran Cudbard-Bell
931 * Added sample "do not respond" policy. See raddb/policy.conf
932 and raddb/sites-available/do_not_respond
933 * Cleanups to Suse spec file from Norbert Wegener
934 * New VSAs for Juniper from Bjorn Mork
935 * Include more RFC dictionaries in the default install
936 * More documentation for the WiMAX module
937 * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
938 This helps with Active Directory. See raddb/modules/ldap
939 * Don't load pre/post-proxy if proxying is disabled.
940 * Added %%{md5:...}, which returns MD5 hash in hex.
941 * Added configurable "retry_interval" and "poll_interval"
942 for "detail" listeners.
943 * Added "delete_mppe_keys" configuration option to rlm_wimax.
944 Apparently some WiMAX clients misbehave when they see those keys.
945 * Added experimental rlm_ruby from
946 http://github.com/Antti/freeradius-server/tree/master
947 * Add Tunnel attributes to ldap.attrmap
948 * Enable virtual servers to be reloaded on HUP. For now, only
949 the "authorize", "authenticate", etc. processing sections are
950 reloaded. Clients and "listen" sections are NOT reloaded.
951 * Updated "radwatch" script to be more robust. See scripts/radwatch
952 * Added certificate compatibility notes in raddb/certs/README,
953 for compatibility with different operating systems. (i.e. Windows)
954 * Permit multiple "-e" in radmin.
955 * Add support for originating CoA-Request and Disconnect-Request.
956 See raddb/sites-available/originate-coa.
957 * Added "lifetime" and "max_queries" to raddb/sql.conf.
958 This helps address the problem of hung SQL sockets.
959 * Allow packets to be injected via radmin. See "inject help"
961 * Answer VMPS reconfirmation request. Patch from Hermann Lauer.
962 * Sample logrotate script in scripts/logrotate.freeradius
963 * Add configurable poll interval for "detail" listeners
964 * New "raddebug" command. This prints debugging information from
965 a running server. See "man raddebug.
966 * Add "require_message_authenticator" configuration to home_server
967 configuration. This makes the server add Message-Authenticator
968 to all outgoing Access-Request packets.
969 * Added smsotp module, as contributed by Siemens.
970 * Enabled the administration socket in the default install.
971 See raddb/sites-available/control-socket, and "man radmin"
972 * Handle duplicate clients, such as with replicated or
973 load-balanced SQL servers and "readclients = yes"
975 * Minor changes to allow building without VQP.
976 * Minor fixes from John Center
977 * Fixed raddebug example
978 * Don't crash when deleting attributes via unlang
979 * Be friendlier to very fast clients
980 * Updated the "detail" listener so that it only polls once,
981 and not many times in a row, leaking memory each time...
982 * Update comparison for Packet-Src-IP-Address (etc.) so that
983 the operators other than '==' work.
984 * Did autoconf magic to work around weird libtool bug
985 * Make rlm_perl keep tags for tagged attributes in more situations
986 * Update UID checking for radmin
987 * Added "include_length" field for TTLS. It's needed for RFC
988 compliance, but not (apparently) for interoperability.
989 * Clean up control sockets when they are closed, so that we don't
991 * Define SUN_LEN for systems that don't have it.
992 * Correct some boundary conditions in the conditional checker ("if")
993 in "unlang". Bug noted by Arran Cudbard-Bell.
994 * Work around minor building issues in gmake. This should only
995 have affected developers.
996 * Change how we manage unprivileged user/group, so that we do not
997 create control sockets owned by root.
998 * Fixed more minor issues found by Coverity.
999 * Allow raddb/certs/bootstrap to run when there is no "make"
1001 * In radiusd.conf, run_dir depends on the name of the program,
1002 and isn't hard-coded to "..../radiusd"
1003 * Check for EOF in more places in the "detail" file reader.
1004 * Added Freeswitch dictionary.
1005 * Chop ethernet frames in VMPS, rather than droppping packets.
1006 * Fix EAP-TLS bug. Patch from Arnaud Ebalard
1007 * Don't lose string for regex-compares in the "users" file.
1008 * Expose more functions in rlm_sql to rlm_sqlippool, which
1009 helps on systems where RTLD_GLOBAL is off.
1010 * Fix typos in MySQL schemas for ippools.
1011 * Remove macro that was causing build issues on some platforms.
1012 * Fixed issues with dead home servers. Bug noted by Chris Moules.
1013 * Fixed "access after free" with some dynamic clients.
1015 - fix packaging bug, some directories missing execute permission
1016 /etc/raddb/dictionary now readable by all.
1018 * Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
1019 - fix type usage in unixodbc to match new type usage in unixodbc API
1021 * Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
1022 - add pointer to Red Hat documentation in docdir
1024 * Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
1025 - rebuild for dependencies
1027 * Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
1028 - upgrade to latest upstream release, upstream summary follows:
1029 The focus of this release is stability.
1030 Feature Improvements:
1031 * Allow running with "user=radiusd" and binding to secure sockets.
1032 * Start sending Status-Server "are you alive" messages earlier, which
1033 helps with proxying multiple realms to a home server.
1034 * Removed thread pool code from rlm_perl. It's not necessary.
1035 * Added example Perl configuration to raddb/modules/perl
1036 * Force OpenSSL to support certificates with SHA256. This seems to be
1037 necessary for WiMAX certs.
1039 * Fix Debian patch to allow it to build.
1040 * Fix potential NULL dereference in debugging mode on certain
1041 platforms for TTLS and PEAP inner tunnels.
1042 * Fix uninitialized memory in handling of vendor definitions
1043 * Fix parsing of quoted (but non-string) attributes in the "users" file.
1044 * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
1045 * use SUN_LEN in control socket, to avoid truncation on some platforms.
1046 * Correct internal handling of "debug condition" to prevent it from
1048 * Check return code of regcomp in "unlang", so that invalid regular
1049 expressions are caught rather than mishandled.
1050 * Make rlm_sql use <ltdl.h>. Addresses bug #610.
1051 * Document list "type = status" better. Closes bug #580.
1052 * Set "default days" for certificates, because OpenSSL won't do it.
1053 This closes bug #615.
1054 * Reference correct list in example raddb/modules/ldap. Closes #596.
1055 * Increase default schema size for Acct-Session-Id to 64. Closes #540.
1056 * Fix use of temporary files in dialup-admin. Closes #605 and
1057 addresses CVE-2008-4474.
1058 * Addressed a number of minor issues found by Coverity.
1059 * Added DHCP option 150 to the dictionary. Closes #618.
1061 * Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
1062 - add --with-system-libtool to configure as a workaround for
1063 undefined reference to lt__PROGRAM__LTX_preloaded_symbols
1065 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1066 - add obsoletes tag for dialupadmin subpackages which were removed
1068 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1069 - add readline-devel BuildRequires
1071 * Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
1072 - Rebuild for Python 2.6
1074 * Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
1075 - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
1076 - remove diaupadmin packages, it's not well supported and there are problems with it.
1078 * Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1079 - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
1080 permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770
1082 * Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1083 - upgrade to new upstream 2.1.1 release
1085 * Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
1086 - Resolves: bug #453761: FreeRADIUS %%post should not include chown -R
1087 specify file attributes for /etc/raddb/ldap.attrmap
1088 fix consistent use of tabs/spaces (rpmlint warning)
1090 * Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
1091 - upgrade to latest upstream, see Changelog for details,
1092 upstream now has more complete fix for bug #447545, local patch removed
1094 * Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
1095 - upgrade to latest upstream, see Changelog for details
1096 - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel
1098 * Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
1099 - # Temporary fix for bug #446864, turn off optimization
1101 * Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
1102 - remove support for radrelay, it's different now
1103 - turn off default inclusion of SQL config files in radiusd.conf since SQL
1104 is an optional RPM install
1105 - remove mssql config files
1107 * Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
1108 - Upgrade to current upstream 2.0.3 release
1109 - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
1110 - Resolve: bug #438665: Contains files owned by buildsystem
1111 - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
1112 to further partition external dependencies.
1113 - Clean up some unnecessary requires dependencies
1114 - Add versioned requires between subpackages
1116 * Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
1117 - add Requires for versioned perl (libperl.so)
1119 * Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
1120 - upgrade to new 2.0 release
1121 - split into subpackages for more fine grained installation
1123 * Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
1124 - Autorebuild for GCC 4.3
1126 * Thu Dec 06 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
1129 * Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
1130 - add support in rlm_ldap for reading clients from ldap
1131 - fix TLS parameter controling if a cert which fails to validate
1132 will be accepted (i.e. self-signed),
1133 rlm_ldap config parameter=tls_require_cert
1134 ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
1135 ldap_set_option() when it should have been ldap_int_tls_config()
1137 * Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
1138 - add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
1140 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
1141 - made init script fully lsb conform
1143 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
1144 - fixed initscript problem (rhbz#292521)
1146 * Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
1147 - fixed initscript for LSB (rhbz#243671, rhbz#243928)
1150 * Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
1152 - install snmp MIB files
1153 - dropped LDAP_DEPRECATED flag, it is upstream
1154 - marked config files for sub packages as config (rhbz#240400)
1155 - moved db files to /var/lib/raddb (rhbz#199082)
1157 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
1158 - radiusd expects /etc/raddb to not be world readable or writable
1159 /etc/raddb now belongs to radiusd, post script sets permissions
1161 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
1164 * Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
1166 - no /etc/raddb/otppasswd.sample anymore
1167 - build is pie by default, dropped pie patch
1168 - fixed build requirement for perl (perl-devel)
1170 * Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
1171 - remove trailing dot from summary
1173 - fix post/postun/preun requirements
1176 * Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
1177 - rebuild for new postgresql library version
1179 * Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
1180 - fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
1183 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
1184 - new version 1.1.3 with lots of upstream bug fixes, some security fixes
1187 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
1188 - commented out include for sql.conf in radiusd.conf (#202561)
1190 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
1193 * Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
1196 * Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
1198 - fixed incorrect rlm_sql globbing (#189095)
1199 Thanks to Yanko Kaneti for the fix.
1200 - fixed chown syntax in post script (#182777)
1201 - dropped gcc34, libdir and realloc-return patch
1202 - spec file cleanup with additional libtool build fixes
1204 * Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
1205 - bump again for double-long bug on ppc(64)
1207 * Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
1208 - rebuilt for new gcc4.1 snapshot and glibc changes
1210 * Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
1213 * Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
1216 * Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
1217 - Rebuild due to mysql update.
1219 * Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
1220 - rebuilt with new openssl
1221 - fixed ignored return value of realloc
1223 * Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
1224 - use include instead of pam_stack in pam config
1226 * Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
1227 - added missing build requires for libtool-ltdl-devel (#160877)
1228 - modified file list to get a report for missing plugins
1230 * Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
1232 - droppend radrelay patch (fixed upstream)
1234 * Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
1235 - rebuild against new postgresql-libs
1237 * Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
1240 * Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
1241 - rebuild for MySQL 4
1242 - switched over to installed libtool
1244 * Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
1245 - Fixed install problem of radeapclient (#138069)
1247 * Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
1249 - applied radrelay CVS patch from Kevin Bonner
1251 * Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
1252 - BuildRequires pam-devel and libtool
1253 - Fix errant text in description
1254 - Other minor cleanups
1256 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
1257 - renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
1258 configuration (#130613)
1260 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
1261 - fixed BuildRequires for openssl-devel (#130606)
1263 * Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
1266 * Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
1267 - added buildrequires for zlib-devel (#127162)
1268 - fixed libdir patch to prefer own libeap instead of installed one (#127168)
1269 - fixed samba account maps in LDAP for samba v3 (#127173)
1271 * Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
1272 - third "pre" release of version 1.0.0
1273 - rlm_ldap is using SASLv2 (#126507)
1275 * Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
1278 * Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
1279 - fixed BuildRequires for gdbm-devel
1281 * Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
1282 - gcc34 compilation fixes
1284 * Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
1287 * Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
1288 - added sql scripts for rlm_sql to documentation (#116435)
1290 * Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
1293 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
1294 - using -fPIC instead of -fpic for s390 ans s390x
1296 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
1297 - radiusd is pie, now
1299 * Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
1300 - new version 0.9.3 (bugfix release)
1302 * Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
1305 * Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
1308 * Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
1309 - modify default PAM configuration to remove the directory part of the module
1310 name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
1311 multilib systems will always load the right module for the architecture
1312 - modify default PAM configuration to use pam_stack
1314 * Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
1315 - com_err.h moved to /usr/include/et
1317 * Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
1320 * Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
1321 - new version 0.9.0 pre3
1323 * Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
1324 - included directory /var/log/radius/radacct for logrotate
1326 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
1327 - moved log and run dir to files section, cleaned up post
1329 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
1330 - added missing run dir in post
1332 * Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
1333 - fixed module load patch
1335 * Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
1336 - removed la files, removed devel package
1337 - split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
1339 - fixed requires and buildrequires
1340 - create logging dir in post if it does not exist
1341 - fixed module load without la files
1343 * Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>