1 Summary: High-performance and highly configurable free RADIUS server
5 License: GPLv2+ and LGPLv2+
6 Group: System Environment/Daemons
7 URL: http://www.freeradius.org/
9 Source0: ftp://ftp.freeradius.org/pub/radius/freeradius-server-%{version}.tar.bz2
10 Source100: freeradius-radiusd-init
11 Source102: freeradius-logrotate
12 Source103: freeradius-pam-conf
14 Patch1: freeradius-cert-config.patch
16 Obsoletes: freeradius-devel
17 Obsoletes: freeradius-libs
19 %define docdir %{_docdir}/freeradius-%{version}
20 %define initddir %{?_initddir:%{_initddir}}%{!?_initddir:%{_initrddir}}
22 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
24 BuildRequires: autoconf
25 BuildRequires: gdbm-devel
26 BuildRequires: libtool
27 BuildRequires: libtool-ltdl-devel
28 BuildRequires: openssl-devel
29 BuildRequires: pam-devel
30 BuildRequires: zlib-devel
31 BuildRequires: net-snmp-devel
32 BuildRequires: net-snmp-utils
33 BuildRequires: readline-devel
34 BuildRequires: libpcap-devel
36 Requires(pre): shadow-utils glibc-common
37 Requires(post): /sbin/chkconfig
38 Requires(preun): /sbin/chkconfig
41 The FreeRADIUS Server Project is a high performance and highly configurable
42 GPL'd free RADIUS server. The server is similar in some respects to
43 Livingston's 2.0 server. While FreeRADIUS started as a variant of the
44 Cistron RADIUS server, they don't share a lot in common any more. It now has
45 many more features than Cistron or Livingston, and is much more configurable.
47 FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
48 protocol, as defined in RFC 2865 (and others). It allows Network Access
49 Servers (NAS boxes) to perform authentication for dial-up users. There are
50 also RADIUS clients available for Web servers, firewalls, Unix logins, and
51 more. Using RADIUS allows authentication and authorization for a network to
52 be centralized, and minimizes the amount of re-configuration which has to be
53 done when adding or deleting new users.
56 Group: System Environment/Daemons
57 Summary: FreeRADIUS utilities
58 Requires: %{name} = %{version}-%{release}
59 Requires: libpcap >= 0.9.4
62 The FreeRADIUS server has a number of features found in other servers,
63 and additional features not found in any other server. Rather than
64 doing a feature by feature comparison, we will simply list the features
65 of the server, and let you decide if they satisfy your needs.
67 Support for RFC and VSA Attributes Additional server configuration
68 attributes Selecting a particular configuration Authentication methods
71 Summary: LDAP support for freeradius
72 Group: System Environment/Daemons
73 Requires: %{name} = %{version}-%{release}
74 BuildRequires: openldap-devel
77 This plugin provides the LDAP support for the FreeRADIUS server project.
80 Summary: Kerberos 5 support for freeradius
81 Group: System Environment/Daemons
82 Requires: %{name} = %{version}-%{release}
83 BuildRequires: krb5-devel
86 This plugin provides the Kerberos 5 support for the FreeRADIUS server project.
89 Summary: Perl support for freeradius
90 Group: System Environment/Daemons
91 Requires: %{name} = %{version}-%{release}
92 Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
93 %{?fedora:BuildRequires: perl-devel}
98 BuildRequires: perl-devel
100 BuildRequires: perl(ExtUtils::Embed)
103 This plugin provides the Perl support for the FreeRADIUS server project.
106 Summary: Python support for freeradius
107 Group: System Environment/Daemons
108 Requires: %{name} = %{version}-%{release}
109 BuildRequires: python-devel
112 This plugin provides the Python support for the FreeRADIUS server project.
115 Summary: MySQL support for freeradius
116 Group: System Environment/Daemons
117 Requires: %{name} = %{version}-%{release}
118 BuildRequires: mysql-devel
121 This plugin provides the MySQL support for the FreeRADIUS server project.
124 Summary: Postgresql support for freeradius
125 Group: System Environment/Daemons
126 Requires: %{name} = %{version}-%{release}
127 BuildRequires: postgresql-devel
129 %description postgresql
130 This plugin provides the postgresql support for the FreeRADIUS server project.
133 Summary: Unix ODBC support for freeradius
134 Group: System Environment/Daemons
135 Requires: %{name} = %{version}-%{release}
136 BuildRequires: unixODBC-devel
138 %description unixODBC
139 This plugin provides the unixODBC support for the FreeRADIUS server project.
143 %setup -q -n freeradius-server-%{version}
144 %patch1 -p1 -b .cert-config
145 # Some source files mistakenly have execute permissions set
146 find $RPM_BUILD_DIR/freeradius-server-%{version} \( -name '*.c' -o -name '*.h' \) -a -perm /0111 -exec chmod a-x {} +
150 export CFLAGS="$RPM_OPT_FLAGS -fPIC"
152 export CFLAGS="$RPM_OPT_FLAGS -fpic"
156 --libdir=%{_libdir}/freeradius \
157 --with-system-libtool \
158 --disable-ltdl-install \
162 --with-docdir=%{docdir} \
163 --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
164 --with-rlm-sql-postgresql-lib-dir=%{_libdir} \
165 --with-rlm-sql_mysql-include-dir=/usr/include/mysql \
166 --with-mysql-lib-dir=%{_libdir}/mysql \
167 --with-unixodbc-lib-dir=%{_libdir} \
168 --with-rlm-dbm-lib-dir=%{_libdir} \
169 --with-rlm-krb5-include-dir=/usr/kerberos/include \
170 --with-modules="rlm_wimax" \
171 --without-rlm_eap_ikev2 \
172 --without-rlm_sql_iodbc \
173 --without-rlm_sql_firebird \
174 --without-rlm_sql_db2 \
175 --without-rlm_sql_oracle
177 %if "%{_lib}" == "lib64"
178 perl -pi -e 's:sys_lib_search_path_spec=.*:sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64":' libtool
184 rm -rf $RPM_BUILD_ROOT
185 mkdir -p $RPM_BUILD_ROOT/var/run/radiusd
186 mkdir -p $RPM_BUILD_ROOT/var/lib/radiusd
187 # fix for bad libtool bug - can not rebuild dependent libs and bins
188 #FIXME export LD_LIBRARY_PATH=$RPM_BUILD_ROOT/%{_libdir}
189 make install R=$RPM_BUILD_ROOT
190 # modify default configuration
191 RADDB=$RPM_BUILD_ROOT%{_sysconfdir}/raddb
192 perl -i -pe 's/^#user =.*$/user = radiusd/' $RADDB/radiusd.conf
193 perl -i -pe 's/^#group =.*$/group = radiusd/' $RADDB/radiusd.conf
195 mkdir -p $RPM_BUILD_ROOT/var/log/radius/radacct
196 touch $RPM_BUILD_ROOT/var/log/radius/{radutmp,radius.log}
198 install -D -m 755 %{SOURCE100} $RPM_BUILD_ROOT/%{initddir}/radiusd
199 install -D -m 644 %{SOURCE102} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/radiusd
200 install -D -m 644 %{SOURCE103} $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/radiusd
202 # remove unneeded stuff
204 rm -f $RPM_BUILD_ROOT/usr/sbin/rc.radiusd
205 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.a
206 rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.la
207 rm -rf $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sql/mssql
208 rm -rf $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sql/oracle
210 # remove header files, we don't ship a devel package and the
211 # headers have multilib conflicts
212 rm -rf $RPM_BUILD_ROOT/%{_includedir}
214 # remove unsupported config files
215 rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/experimental.conf
217 # install doc files omitted by standard install
218 for f in COPYRIGHT CREDITS INSTALL README; do
219 cp $f $RPM_BUILD_ROOT/%{docdir}
221 cp LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.gpl
222 cp src/lib/LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.lgpl
223 cp src/LICENSE.openssl $RPM_BUILD_ROOT/%{docdir}/LICENSE.openssl
225 # add Red Hat specific documentation
226 cat >> $RPM_BUILD_ROOT/%{docdir}/REDHAT << EOF
228 Red Hat, RHEL, Fedora, and CentOS specific information can be found on the
229 FreeRADIUS Wiki in the Red Hat FAQ.
231 http://wiki.freeradius.org/guide/Red_Hat_FAQ
233 Please reference that document.
238 rm -rf $RPM_BUILD_ROOT
242 # Make sure our user/group is present prior to any package or subpackage installation
244 getent group radiusd >/dev/null || /usr/sbin/groupadd -r -g 95 radiusd
245 getent passwd radiusd >/dev/null || /usr/sbin/useradd -r -g radiusd -u 95 -c "radiusd user" -s /sbin/nologin radiusd > /dev/null 2>&1
250 /sbin/chkconfig --add radiusd
251 if [ ! -e /etc/raddb/certs/server.pem ]; then
252 /sbin/runuser -g radiusd -c 'umask 007; /etc/raddb/certs/bootstrap' > /dev/null 2>&1 || :
258 /sbin/service radiusd stop > /dev/null 2>&1
259 /sbin/chkconfig --del radiusd
264 if [ $1 -ge 1 ]; then
265 /sbin/service radiusd condrestart >/dev/null 2>&1 || :
270 %defattr(-,root,root)
272 %config(noreplace) %{_sysconfdir}/pam.d/radiusd
273 %config(noreplace) %{_sysconfdir}/logrotate.d/radiusd
275 %dir %attr(755,radiusd,radiusd) /var/lib/radiusd
277 %dir %attr(755,root,radiusd) /etc/raddb
278 %defattr(-,root,radiusd)
279 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/filter/*
280 %attr(644,root,radiusd) %config(noreplace) /etc/raddb/dictionary
281 %config(noreplace) /etc/raddb/acct_users
282 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/clients.conf
283 %config(noreplace) /etc/raddb/hints
284 %config(noreplace) /etc/raddb/huntgroups
285 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/preproxy_users
286 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/proxy.conf
287 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/radiusd.conf
288 %dir %attr(750,root,radiusd) /etc/raddb/sql
289 #%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/oracle/*
290 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/users
291 %dir %attr(770,root,radiusd) /etc/raddb/certs
292 %config(noreplace) /etc/raddb/certs/Makefile
293 %config(noreplace) /etc/raddb/certs/README
294 %config(noreplace) /etc/raddb/certs/xpextensions
295 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/*.cnf
296 %attr(750,root,radiusd) /etc/raddb/certs/bootstrap
297 %dir %attr(750,root,radiusd) /etc/raddb/sites-available
298 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/*
299 %dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
300 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-enabled/*
301 %config(noreplace) %attr(640,root,radiusd) /etc/raddb/example.pl
302 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.conf
303 %config(noreplace) /etc/raddb/policy.txt
304 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/templates.conf
305 %dir %attr(750,root,radiusd) /etc/raddb/modules
306 %dir %attr(750,root,radiusd) /etc/raddb/mods-available
307 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-available/*
308 %dir %attr(750,root,radiusd) /etc/raddb/mods-enabled
309 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/mods-enabled/*
310 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/*
311 %dir %attr(755,radiusd,radiusd) /var/run/radiusd/
313 %defattr(-,root,root)
320 %doc %{_mandir}/man5/acct_users.5.gz
321 %doc %{_mandir}/man5/clients.conf.5.gz
322 %doc %{_mandir}/man5/dictionary.5.gz
323 %doc %{_mandir}/man5/radiusd.conf.5.gz
324 %doc %{_mandir}/man5/radrelay.conf.5.gz
325 %doc %{_mandir}/man5/rlm_always.5.gz
326 %doc %{_mandir}/man5/rlm_attr_filter.5.gz
327 %doc %{_mandir}/man5/rlm_attr_rewrite.5.gz
328 %doc %{_mandir}/man5/rlm_chap.5.gz
329 %doc %{_mandir}/man5/rlm_counter.5.gz
330 %doc %{_mandir}/man5/rlm_detail.5.gz
331 %doc %{_mandir}/man5/rlm_digest.5.gz
332 %doc %{_mandir}/man5/rlm_expr.5.gz
333 %doc %{_mandir}/man5/rlm_files.5.gz
334 %doc %{_mandir}/man5/rlm_mschap.5.gz
335 %doc %{_mandir}/man5/rlm_pap.5.gz
336 %doc %{_mandir}/man5/rlm_passwd.5.gz
337 %doc %{_mandir}/man5/rlm_realm.5.gz
338 %doc %{_mandir}/man5/rlm_sql.5.gz
339 %doc %{_mandir}/man5/rlm_sql_log.5.gz
340 %doc %{_mandir}/man5/rlm_unix.5.gz
341 %doc %{_mandir}/man5/unlang.5.gz
342 %doc %{_mandir}/man5/users.5.gz
343 %doc %{_mandir}/man8/raddebug.8.gz
344 %doc %{_mandir}/man8/radiusd.8.gz
345 %doc %{_mandir}/man8/radmin.8.gz
346 %doc %{_mandir}/man8/radrelay.8.gz
347 %doc %{_mandir}/man8/radwatch.8.gz
349 %dir %attr(755,root,root) /usr/share/freeradius
350 /usr/share/freeradius/*
352 %dir %attr(700,radiusd,radiusd) /var/log/radius/
353 %dir %attr(700,radiusd,radiusd) /var/log/radius/radacct/
354 %ghost %attr(644,radiusd,radiusd) /var/log/radius/radutmp
355 %ghost %attr(600,radiusd,radiusd) /var/log/radius/radius.log
357 %attr(755,root,root) %{_libdir}/freeradius/lib*.so*
358 # RADIUS Loadable Modules
359 %dir %attr(755,root,root) %{_libdir}/freeradius
360 #%attr(755,root,root) %{_libdir}/freeradius/rlm_*.so*
361 %{_libdir}/freeradius/rlm_always.so
362 %{_libdir}/freeradius/rlm_always-%{version}.so
363 %{_libdir}/freeradius/rlm_attr_filter.so
364 %{_libdir}/freeradius/rlm_attr_filter-%{version}.so
365 %{_libdir}/freeradius/rlm_attr_rewrite.so
366 %{_libdir}/freeradius/rlm_attr_rewrite-%{version}.so
367 %{_libdir}/freeradius/rlm_chap.so
368 %{_libdir}/freeradius/rlm_chap-%{version}.so
369 %{_libdir}/freeradius/rlm_checkval.so
370 %{_libdir}/freeradius/rlm_checkval-%{version}.so
371 %{_libdir}/freeradius/rlm_copy_packet.so
372 %{_libdir}/freeradius/rlm_copy_packet-%{version}.so
373 %{_libdir}/freeradius/rlm_counter.so
374 %{_libdir}/freeradius/rlm_counter-%{version}.so
375 %{_libdir}/freeradius/rlm_dbm.so
376 %{_libdir}/freeradius/rlm_dbm-%{version}.so
377 %{_libdir}/freeradius/rlm_detail.so
378 %{_libdir}/freeradius/rlm_detail-%{version}.so
379 %{_libdir}/freeradius/rlm_digest.so
380 %{_libdir}/freeradius/rlm_digest-%{version}.so
381 %{_libdir}/freeradius/rlm_dynamic_clients.so
382 %{_libdir}/freeradius/rlm_dynamic_clients-%{version}.so
383 %{_libdir}/freeradius/rlm_eap.so
384 %{_libdir}/freeradius/rlm_eap-%{version}.so
385 %{_libdir}/freeradius/rlm_eap_gtc.so
386 %{_libdir}/freeradius/rlm_eap_gtc-%{version}.so
387 %{_libdir}/freeradius/rlm_eap_leap.so
388 %{_libdir}/freeradius/rlm_eap_leap-%{version}.so
389 %{_libdir}/freeradius/rlm_eap_md5.so
390 %{_libdir}/freeradius/rlm_eap_md5-%{version}.so
391 %{_libdir}/freeradius/rlm_eap_mschapv2.so
392 %{_libdir}/freeradius/rlm_eap_mschapv2-%{version}.so
393 %{_libdir}/freeradius/rlm_eap_peap.so
394 %{_libdir}/freeradius/rlm_eap_peap-%{version}.so
395 %{_libdir}/freeradius/rlm_eap_sim.so
396 %{_libdir}/freeradius/rlm_eap_sim-%{version}.so
397 %{_libdir}/freeradius/rlm_eap_tls.so
398 %{_libdir}/freeradius/rlm_eap_tls-%{version}.so
399 %{_libdir}/freeradius/rlm_eap_ttls.so
400 %{_libdir}/freeradius/rlm_eap_ttls-%{version}.so
401 %{_libdir}/freeradius/rlm_exec.so
402 %{_libdir}/freeradius/rlm_exec-%{version}.so
403 %{_libdir}/freeradius/rlm_expiration.so
404 %{_libdir}/freeradius/rlm_expiration-%{version}.so
405 %{_libdir}/freeradius/rlm_expr.so
406 %{_libdir}/freeradius/rlm_expr-%{version}.so
407 %{_libdir}/freeradius/rlm_fastusers.so
408 %{_libdir}/freeradius/rlm_fastusers-%{version}.so
409 %{_libdir}/freeradius/rlm_files.so
410 %{_libdir}/freeradius/rlm_files-%{version}.so
411 %{_libdir}/freeradius/rlm_ippool.so
412 %{_libdir}/freeradius/rlm_ippool-%{version}.so
413 %{_libdir}/freeradius/rlm_linelog.so
414 %{_libdir}/freeradius/rlm_linelog-%{version}.so
415 %{_libdir}/freeradius/rlm_logintime.so
416 %{_libdir}/freeradius/rlm_logintime-%{version}.so
417 %{_libdir}/freeradius/rlm_mschap.so
418 %{_libdir}/freeradius/rlm_mschap-%{version}.so
419 %{_libdir}/freeradius/rlm_otp.so
420 %{_libdir}/freeradius/rlm_otp-%{version}.so
421 %{_libdir}/freeradius/rlm_pam.so
422 %{_libdir}/freeradius/rlm_pam-%{version}.so
423 %{_libdir}/freeradius/rlm_pap.so
424 %{_libdir}/freeradius/rlm_pap-%{version}.so
425 %{_libdir}/freeradius/rlm_passwd.so
426 %{_libdir}/freeradius/rlm_passwd-%{version}.so
427 %{_libdir}/freeradius/rlm_preprocess.so
428 %{_libdir}/freeradius/rlm_preprocess-%{version}.so
429 %{_libdir}/freeradius/rlm_radutmp.so
430 %{_libdir}/freeradius/rlm_radutmp-%{version}.so
431 %{_libdir}/freeradius/rlm_realm.so
432 %{_libdir}/freeradius/rlm_realm-%{version}.so
433 %{_libdir}/freeradius/rlm_replicate.so
434 %{_libdir}/freeradius/rlm_replicate-%{version}.so
435 %{_libdir}/freeradius/rlm_soh.so
436 %{_libdir}/freeradius/rlm_soh-%{version}.so
437 %{_libdir}/freeradius/rlm_sql.so
438 %{_libdir}/freeradius/rlm_sql-%{version}.so
439 %{_libdir}/freeradius/rlm_sql_log.so
440 %{_libdir}/freeradius/rlm_sql_log-%{version}.so
441 %{_libdir}/freeradius/rlm_sqlcounter.so
442 %{_libdir}/freeradius/rlm_sqlcounter-%{version}.so
443 %{_libdir}/freeradius/rlm_sqlippool.so
444 %{_libdir}/freeradius/rlm_sqlippool-%{version}.so
445 %{_libdir}/freeradius/rlm_unix.so
446 %{_libdir}/freeradius/rlm_unix-%{version}.so
447 %{_libdir}/freeradius/rlm_wimax.so
448 %{_libdir}/freeradius/rlm_wimax-%{version}.so
451 %defattr(-,root,root)
454 %doc %{_mandir}/man1/radclient.1.gz
455 %doc %{_mandir}/man1/radeapclient.1.gz
456 %doc %{_mandir}/man1/radlast.1.gz
457 %doc %{_mandir}/man1/radtest.1.gz
458 %doc %{_mandir}/man1/radwho.1.gz
459 %doc %{_mandir}/man1/radzap.1.gz
460 %doc %{_mandir}/man8/radsqlrelay.8.gz
461 %doc %{_mandir}/man8/rlm_ippool_tool.8.gz
464 %defattr(-,root,root)
465 %{_libdir}/freeradius/rlm_krb5.so
466 %{_libdir}/freeradius/rlm_krb5-%{version}.so
467 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/krb5
470 %defattr(-,root,root)
471 %{_libdir}/freeradius/rlm_perl.so
472 %{_libdir}/freeradius/rlm_perl-%{version}.so
475 %defattr(-,root,root)
476 %{_libdir}/freeradius/rlm_python.so
477 %{_libdir}/freeradius/rlm_python-%{version}.so
480 %defattr(-,root,root)
481 %dir %attr(750,root,radiusd) /etc/raddb/sql/mysql
482 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/mysql/*
483 %dir %attr(750,root,radiusd) /etc/raddb/sql/ndb
484 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/ndb/*
485 %{_libdir}/freeradius/rlm_sql_mysql.so
486 %{_libdir}/freeradius/rlm_sql_mysql-%{version}.so
489 %defattr(-,root,root)
490 %dir %attr(750,root,radiusd) /etc/raddb/sql/postgresql
491 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/postgresql/*
492 %{_libdir}/freeradius/rlm_sql_postgresql.so
493 %{_libdir}/freeradius/rlm_sql_postgresql-%{version}.so
496 %defattr(-,root,root)
497 %{_libdir}/freeradius/rlm_ldap.so
498 %{_libdir}/freeradius/rlm_ldap-%{version}.so
499 %attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/ldap
502 %defattr(-,root,root)
503 %{_libdir}/freeradius/rlm_sql_unixodbc.so
504 %{_libdir}/freeradius/rlm_sql_unixodbc-%{version}.so
507 * Wed Sep 22 2010 John Dennis <jdennis@redhat.com> - 2.1.10-1
508 - upgrade to latest upstream release
510 * Install the "radcrypt" program.
511 * Enable radclient to send requests containing MS-CHAPv1
512 Send packets with: MS-CHAP-Password = "password". It will
513 be automatically converted to the correct MS-CHAP attributes.
514 * Added "-t" command-line option to radtest. You can use "-t pap",
515 "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap"
516 * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
517 This change and the previous one makes PEAP testing much easier.
518 * Added more documentation and examples for the "passwd" module.
519 * Added dictionaries for RFC 5607 and RFC 5904.
520 * Added note in proxy.conf that we recommend setting
521 "require_message_authenticator = yes" for all home servers.
522 * Added example of second "files" configuration, with documentation.
523 This shows how and where to use two instances of a module.
524 * Updated radsniff to have it write pcap files, too. See '-w'.
525 * Print out large WARNING message if we send an Access-Challenge
526 for EAP, and receive no follow-up messages from the client.
527 * Added Cached-Session-Policy for EAP session resumption. See
529 * Added support for TLS-Cert-* attributes. For details, see
530 raddb/sites-available/default, "post-auth" section.
531 * Added sample raddb/modules/{opendirectory,dynamic_clients}
532 * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
533 * Added RFCs 5607, 5904, and 5997.
534 * For EAP-TLS, client certificates can now be validated using an
535 external command. See eap.conf, "validate" subsection of "tls".
536 * Made rlm_pap aware of {nthash} prefix, for compatibility with
537 legacy RADIUS systems.
538 * Add Module-Failure-Message for mschap module (ntlm_auth)
539 * made rlm_sql_sqlite database configurable. Use "filename"
541 * Added %{tolower: ...string ... }, which returns the lowercase
542 version of the string.
545 * Fix endless loop when there are multiple sub-options for
547 * More debug output when sending / receiving DHCP packets.
548 * EAP-MSCHAPv2 should return the MPPE keys when used outside
549 of a TLS tunnel. This is needed for IKE.
550 * Added SSL "no ticket" option to prevent SSL from creating sessions
551 without IDs. We need the IDs, so this option should be set.
552 * Fix proxying of packets from inside a TTLS/PEAP tunnel.
554 * Allow IPv6 address attributes to be created from domain names
556 * Set the string length to the correct value when parsing double
557 quotes. Closes bug #88.
558 * No longer look users up in /etc/passwd in the default configuration.
559 This can be reverted by enabling "unix" in the "authorize" section.
560 * More #ifdef's to enable building on systems without certain
562 * Fixed SQL-Group comparison to register only if the group
564 * Fixed SQL-Group comparison to register <instance>-SQL-Group,
565 just like rlm_ldap. This lets you have multiple SQL group checks.
566 * Fix scanning of octal numbers in "unlang". Closes bug #89.
567 * Be less aggressive about freeing "stuck" requests. Closes bug #35.
568 * Fix example in "originate-coa" to refer to the correct packet.
569 * Change default timeout for dynamic clients to 1 hour, not 1 day.
570 * Allow passwd module to map IP addresses, too.
571 * Allow passwd module to be used for CoA packets
572 * Put boot filename into DHCP header when DHCP-Boot-Filename
574 * raddb/certs/Makefile no longer has certs depend on index.txt and
575 serial. Closes bug #64.
576 * Ignore NULL errorcode in PostgreSQL client. Closes bug #39
577 * Made Exec-Program and Exec-Program-Wait work in accounting
578 section again. See sites-available/default.
579 * Fix long-standing memory leak in esoteric conditions. Found
581 * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
582 This will automatically convert more passwords.
583 * Updated rlm_pap to decode Password-With-Header, if it was base64
584 encoded, and to treat the contents as potentially binary data.
585 * Fix Novell eDir code to use the right function parameters.
587 * Allow spaces to be escaped when executing external programs.
589 * Be less restrictive about checking permissions on control socket.
590 If we're root, allow connecting to a non-root socket.
591 * Remove control socket on normal server exit. If the server isn't
592 running, the control socket should not exist.
593 * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
594 calculations. It *MAY* be different (upper / lower case) from
595 the User-Name attribute. Closes bug #17.
596 * If the EAP-TLS methods have problems, more SSL errors are now
597 available in the Module-Failure-Message attribute.
598 * Update Oracle configure scripts. Closes bug #57.
599 * Added text to DESC fields of doc/examples/openldap.schema
600 * Updated more documentation to use "Restructured Text" format.
601 Thanks to James Lockie.
602 * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11.
603 * Return error for potential proxy loops when using "-XC"
604 * Produce better error messages when slow databases block
606 * Added notes on DHCP broadcast packets for FreeBSD.
607 * Fixed crash when parsing some date strings. Closes bug #98
608 * Improperly formatted Attributes are now printed as "Attr-##".
609 If they are not correct, they should not use the dictionary name.
610 * Fix rlm_digest to be check the format of the Digest attributes,
611 and return "noop" rather than "fail" if they're not right.
612 * Enable "digest" in raddb/sites-available/default. This change
613 enables digest authentication to work "out of the box".
614 * Be less aggressive about marking home servers as zombie.
615 If they are responding to some packets, they are still alive.
616 * Added Packet-Transmit-Counter, to track detail file retransmits.
618 * Added configure check for lt_dladvise_init(). If it exists, then
619 using it solves some issues related to libraries loading libraries.
620 * Added indexes to the MySQL IP Pool schema.
621 * Print WARNING message if too many attributes are put into a packet.
622 * Include dhcp test client (not built by default)
623 * Added checks for LDAP constraint violation. Closes bug #18.
624 * Change default raddebug timeout to 60 seconds.
625 * Made error / warning messages more consistent.
626 * Correct back-slash handling in variable expansion. Closes bug #46.
627 You SHOULD check your configuration for backslash expansion!
628 * Fix typo in "configure" script (--enable-libltdl-install)
629 * Use local libltdl in more situations. This helps to avoid
630 compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
631 * Fix hang on startup when multiple home servers were defined
632 with "src_ipaddr" field.
633 * Fix 32/64 bit issue in rlm_ldap. Closes bug #105.
634 * If the first "listen" section uses 127.0.0.1, don't use that
635 as the source IP for proxying. It won't work.
636 * When Proxy-To-Realm is set to a non-existent realm, the EAP module
637 should handle the request, rather than expecting it to be proxied.
638 * Fix IPv4 issues with udpfromto. Closes bug #110.
639 * Clean up child processes of raddebug. Closes bugs #108 and #109
640 * retry OTP if the OTP daemon fails. Closes bug #58.
641 * Multiple calls to ber_printf seem to work better. Closes #106.
642 * Fix "unlang" so that "attribute not found" is treated as a "false"
643 comparison, rather than a syntax error in the configuration.
646 * Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
647 - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
649 * Tue Jun 01 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
650 - Mass rebuild with perl-5.12.0
652 * Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
653 - update to latest upstream, mainly bug fix release
655 * Add radmin command "stats detail <file>" to see what
656 is going on inside of a detail file reader.
657 * Added documentation for CoA. See raddb/sites-available/coa
658 * Add sub-option support for Option 82. See dictionary.dhcp
659 * Add "server" field to default SQL NAS table, and documented it.
662 * Reset "received ping" counter for Status-Server checks. In some
663 corner cases it was not getting reset.
664 * Handle large VMPS attributes.
665 * Count accounting responses from a home server in SNMP / statistics
667 * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
668 * radmin packet counter statistics are now unsigned, for numbers
669 2^31..2^32. After that they roll over to zero.
670 * Be more careful about expanding data in PAP and MS-CHAP modules.
671 This prevents login failures when passwords contain '{'.
672 * Clean up zombie children if there were many "exec" modules being
673 run for one packet, all with "wait = no".
674 * re-open log file after HUP. Closes bug #63.
675 * Fix "no response to proxied packet" complaint for Coa / Disconnect
676 packets. It shouldn't ignore replies to packets it sent.
677 * Calculate IPv6 netmasks correctly. Closes bug #69.
678 * Fix SQL module to re-open sockets if they unexpectedly close.
679 * Track scope for IPv6 addresses. This lets us use link-local
680 addresses properly. Closes bug #70.
681 * Updated Makefiles to no longer use the shell for recursing into
682 subdirs. "make -j 2" should now work.
683 * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
685 * Updated Makefiles so that "make reconfig" no longer uses the shell
686 for recursing into subdirs, and re-builds all "configure" files.
687 * Used above method to regenerate all configure scripts.
689 * Updated SQL module to allow "server" field of "nas" table
690 to be blank: "". This means the same as it being NULL.
691 * Fixed regex realm example. Create Realm attribute with value
692 of realm from User-Name, not from regex. Closes bug #40.
693 * If processing a DHCP Discover returns "fail / reject", ignore
694 the packet rather than sending a NAK.
695 * Allow '%' to be escaped in sqlcounter module.
696 * Fix typo internal hash table.
697 * For PEAP and TTLS, the tunneled reply is added to the reply,
698 rather than integrated via the operators. This allows multiple
699 VSAs to be added, where they would previously be discarded.
700 * Make request number unsigned. This changes nothing other than
701 the debug output when the server receives more than 2^31 packets.
702 * Don't block when reading child output in 'exec wait'. This means
703 that blocked children get killed, instead of blocking the server.
704 * Enabled building without any proxy functionality
705 * radclient now prefers IPv4, to match the default server config.
706 * Print useful error when a realm regex is invalid
707 * relaxed rules for preprocess module "with_cisco_vsa_hack". The
708 attributes can now be integer, ipaddr, etc. (i.e. non-string)
709 * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
711 * Update configure script for rlm_python to avoid dynamic linking
712 problems on some platforms.
713 * Work-around for bug #35
714 * Do suid to "user" when running in debug mode as root
715 * Make "allow_core_dumps" work in more situations.
716 * In detail file reader, treat bad records as EOF.
717 This allows it to continue working when the disk is full.
718 * Fix Oracle default accounting queries to work when there are no
719 gigawords attributes. Other databases already had the fix.
720 * Fix rlm_sql to show when it opens and closes sockets. It already
721 says when it cannot connect, so it should say when it can connect.
722 * "chmod -x" for a few C source files.
723 * Pull update spec files, etc. from RedHat into the redhat/ directory.
724 * Allow spaces when parsing integer values. This helps people who
725 put "too much" into an SQL value field.
727 * Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
728 - resolves: bug #526559 initial install should run bootstrap to create certificates
729 running radiusd in debug mode to generate inital temporary certificates
730 is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
731 rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
732 - resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
733 the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
734 were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months
736 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
737 - update to latest upstream
739 * Print more descriptive error message for too many EAP sessions.
740 This gives hints on what to do when "failed to store handler"
741 * Commands received from radmin are now printed on stdout when
743 * Allow accounting packets to be written to a detail file, even
744 if they were read from a different detail file.
745 * Added OpenSSL license exception (src/LICENSE.openssl)
748 * DHCP sockets can now set the broadcast flag before binding to a
749 socket. You need to set "broadcast = yes" in the DHCP listener.
750 * Be more restrictive on string parsing in the config files
751 * Fix password length in scripts/create-users.pl
752 * Be more flexible about parsing the detail file. This allows
753 it to read files where the attributes have been edited.
754 * Ensure that requests read from the detail file are cleaned up
755 (i.e. don't leak) if they are proxied without a response.
756 * Write the PID file after opening sockets, not before
758 * Proxying large numbers of packets no longer gives error
759 "unable to open proxy socket".
760 * Avoid mutex locks in libc after fork
761 * Retry packet from detail file if there was no response.
762 * Allow old-style dictionary formats, where the vendor name is the
763 last field in an ATTRIBUTE definition.
764 * Removed all recursive use of mutexes. Some systems just don't
766 * Allow !* to work as documented.
767 * make templates work (see templates.conf)
768 * Enabled "allow_core_dumps" to work again
769 * Print better errors when reading invalid dictionaries
770 * Sign client certificates with CA, rather than server certs.
771 * Fix potential crash in rlm_passwd when file was closed
772 * Fixed corner cases in conditional dynamic expansion.
773 * Use InnoDB for MySQL IP Pools, to gain transactional support
774 * Apply patch to libltdl for CVE-2009-3736.
775 * Fixed a few issues found by LLVM's static checker
776 * Keep track of "bad authenticators" for accounting packets
777 * Keep track of "dropped packets" for auth/acct packets
778 * Synced the "debian" directory with upstream
779 * Made "unlang" use unsigned 32-bit integers, to match the
782 * Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
783 - Remove devel subpackage. It doesn't make much sense to have a devel package since
784 we don't ship libraries and it produces multilib conflicts.
786 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
787 - more spec file clean up from review comments
788 - remove freeradius-libs subpackage, move libfreeradius-eap and
789 libfreeradius-radius into the main package
790 - fix subpackage requires, change from freeradius-libs to main package
791 - fix description of the devel subpackage, remove referene to non-shipped libs
792 - remove execute permissions on src files included in debuginfo
793 - remove unnecessary use of ldconfig
794 - since all sub-packages now require main package remove user creation for sub-packages
795 - also include the LGPL library license file in addition to the GPL license file
796 - fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6
798 * Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
799 - fix various rpmlint issues.
801 * Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
802 - rebuild against perl 5.10.1
804 * Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
805 - resolves: bug #522111 non-conformant initscript
806 also change permission of /var/run/radiusd from 0700 to 0755
807 so that "service radiusd status" can be run as non-root
809 * Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
810 - use password-auth common PAM configuration instead of system-auth
812 * Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
813 - enable building of the rlm_wimax module
814 - pcap wire analysis support is enabled and available in utils subpackage
815 - Resolves bug #523053 radtest manpage in wrong package
816 - update to latest upstream release, from upstream Changelog:
818 * Full support for CoA and Disconnect packets as per RFC 3576
819 and RFC 5176. Both receiving and proxying CoA is supported.
820 * Added "src_ipaddr" configuration to "home_server". See
821 proxy.conf for details.
822 * radsniff now accepts -I, to read from a filename instead of
824 * radsniff also prints matching requests and any responses to those
825 requests when '-r' is used.
826 * Added example of attr_filter for Access-Challenge packets
827 * Added support for udpfromto in DHCP code
828 * radmin can now selectively mark modules alive/dead.
829 See "set module state".
830 * Added customizable messages on login success/fail.
831 See msg_goodpass && msg_badpass in log{} section of radiusd.conf
832 * Document "chase_referrals" and "rebind" in raddb/modules/ldap
833 * Preliminary implementation of DHCP relay.
834 * Made thread pool section optional. If it doesn't exist,
835 the server will run single-threaded.
836 * Added sample radrelay.conf for people upgrading from 1.x
837 * Made proxying more stable by failing over, rather than
838 rejecting the first request. See "response_window" in proxy.conf
839 * Allow home_server_pools to exist without realms.
840 * Add dictionary.iea (closes bug #7)
841 * Added support for RFC 5580
842 * Added experimental sql_freetds module from Gabriel Blanchard.
843 * Updated dictionary.foundry
844 * Added sample configuration for MySQL cluster in raddb/sql/ndb
845 See the README file for explanations.
847 * Fixed corner case where proxied packets could have extra
848 character in User-Password attribute. Fix from Niko Tyni.
849 * Extended size of "attribute" field in SQL to 64.
850 * Fixes to ruby module to be more careful about when it builds.
851 * Updated Perl module "configure" script to check for broken
853 * Fix "status_check = none". It would still send packets
855 * Set recursive flag on the proxy mutex, which enables safer
856 cleanup on some platforms.
857 * Copy the EAP username verbatim, rather than escaping it.
858 * Update handling so that robust-proxy-accounting works when
859 all home servers are down for extended periods of time.
860 * Look for DHCP option 53 anywhere in the packet, not just
862 * Fix processing of proxy fail handler with virtual servers.
863 * DHCP code now prints out correct src/dst IP addresses
864 when sending packets.
865 * Removed requirement for DHCP to have clients
866 * Fixed handling of DHCP packets with message-type buried in the packet
867 * Fixed corner case with negation in unlang.
868 * Minor fixes to default MySQL & PostgreSQL schemas
869 * Suppress MSCHAP complaints in debugging mode.
870 * Fix SQL module for multiple instance, and possible crash on HUP
871 * Fix permissions for radius.log for sites that change user/group,
872 but which don't create the file before starting radiusd.
873 * Fix double counting of packets when proxying
875 * Fix pthread keys in rlm_perl
876 * Log reasons for EAP failure (closes bug #8)
877 * Load home servers and pools that aren't referenced from a realm.
878 * Handle return codes from virtual attributes in "unlang"
879 (e.g. LDAP-Group). This makes "!(expr)" work for them.
880 * Enable VMPS to see contents of virtual server again
881 * Fix WiMAX module to be consistent with examples. (closes bug #10)
882 * Fixed crash with policies dependent on NAS-Port comparisons
883 * Allowed vendor IDs to be be higher than 32767.
884 * Fix crash on startup with certain regexes in "hints" file.
885 * Fix crash in attr_filter module when packets don't exist
886 * Allow detail file reader to be faster when "load_factor = 100"
887 * Add work-around for build failures with errors related to
888 lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
889 * Made ldap module "rebind" option aware of older, incompatible
890 versions of OpenLDAP.
891 * Check value of Fall-Through in attr_filter module.
893 * Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
894 - rebuilt with new openssl
896 * Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
897 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
899 * Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
900 - install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
902 * Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
903 - resolves bug #507571 freeradius packages do not check for user/group existence
905 * Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
906 - make /etc/raddb/sites-available/* be config(noreplace)
908 * Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
909 - update to latest upstream release, from upstream Changelog:
911 * radclient exits with 0 on successful (accept / ack), and 1
912 otherwise (no response / reject)
913 * Added support for %%{sql:UPDATE ..}, and insert/delete
914 Patch from Arran Cudbard-Bell
915 * Added sample "do not respond" policy. See raddb/policy.conf
916 and raddb/sites-available/do_not_respond
917 * Cleanups to Suse spec file from Norbert Wegener
918 * New VSAs for Juniper from Bjorn Mork
919 * Include more RFC dictionaries in the default install
920 * More documentation for the WiMAX module
921 * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
922 This helps with Active Directory. See raddb/modules/ldap
923 * Don't load pre/post-proxy if proxying is disabled.
924 * Added %%{md5:...}, which returns MD5 hash in hex.
925 * Added configurable "retry_interval" and "poll_interval"
926 for "detail" listeners.
927 * Added "delete_mppe_keys" configuration option to rlm_wimax.
928 Apparently some WiMAX clients misbehave when they see those keys.
929 * Added experimental rlm_ruby from
930 http://github.com/Antti/freeradius-server/tree/master
931 * Add Tunnel attributes to ldap.attrmap
932 * Enable virtual servers to be reloaded on HUP. For now, only
933 the "authorize", "authenticate", etc. processing sections are
934 reloaded. Clients and "listen" sections are NOT reloaded.
935 * Updated "radwatch" script to be more robust. See scripts/radwatch
936 * Added certificate compatibility notes in raddb/certs/README,
937 for compatibility with different operating systems. (i.e. Windows)
938 * Permit multiple "-e" in radmin.
939 * Add support for originating CoA-Request and Disconnect-Request.
940 See raddb/sites-available/originate-coa.
941 * Added "lifetime" and "max_queries" to raddb/sql.conf.
942 This helps address the problem of hung SQL sockets.
943 * Allow packets to be injected via radmin. See "inject help"
945 * Answer VMPS reconfirmation request. Patch from Hermann Lauer.
946 * Sample logrotate script in scripts/logrotate.freeradius
947 * Add configurable poll interval for "detail" listeners
948 * New "raddebug" command. This prints debugging information from
949 a running server. See "man raddebug.
950 * Add "require_message_authenticator" configuration to home_server
951 configuration. This makes the server add Message-Authenticator
952 to all outgoing Access-Request packets.
953 * Added smsotp module, as contributed by Siemens.
954 * Enabled the administration socket in the default install.
955 See raddb/sites-available/control-socket, and "man radmin"
956 * Handle duplicate clients, such as with replicated or
957 load-balanced SQL servers and "readclients = yes"
959 * Minor changes to allow building without VQP.
960 * Minor fixes from John Center
961 * Fixed raddebug example
962 * Don't crash when deleting attributes via unlang
963 * Be friendlier to very fast clients
964 * Updated the "detail" listener so that it only polls once,
965 and not many times in a row, leaking memory each time...
966 * Update comparison for Packet-Src-IP-Address (etc.) so that
967 the operators other than '==' work.
968 * Did autoconf magic to work around weird libtool bug
969 * Make rlm_perl keep tags for tagged attributes in more situations
970 * Update UID checking for radmin
971 * Added "include_length" field for TTLS. It's needed for RFC
972 compliance, but not (apparently) for interoperability.
973 * Clean up control sockets when they are closed, so that we don't
975 * Define SUN_LEN for systems that don't have it.
976 * Correct some boundary conditions in the conditional checker ("if")
977 in "unlang". Bug noted by Arran Cudbard-Bell.
978 * Work around minor building issues in gmake. This should only
979 have affected developers.
980 * Change how we manage unprivileged user/group, so that we do not
981 create control sockets owned by root.
982 * Fixed more minor issues found by Coverity.
983 * Allow raddb/certs/bootstrap to run when there is no "make"
985 * In radiusd.conf, run_dir depends on the name of the program,
986 and isn't hard-coded to "..../radiusd"
987 * Check for EOF in more places in the "detail" file reader.
988 * Added Freeswitch dictionary.
989 * Chop ethernet frames in VMPS, rather than droppping packets.
990 * Fix EAP-TLS bug. Patch from Arnaud Ebalard
991 * Don't lose string for regex-compares in the "users" file.
992 * Expose more functions in rlm_sql to rlm_sqlippool, which
993 helps on systems where RTLD_GLOBAL is off.
994 * Fix typos in MySQL schemas for ippools.
995 * Remove macro that was causing build issues on some platforms.
996 * Fixed issues with dead home servers. Bug noted by Chris Moules.
997 * Fixed "access after free" with some dynamic clients.
999 - fix packaging bug, some directories missing execute permission
1000 /etc/raddb/dictionary now readable by all.
1002 * Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
1003 - fix type usage in unixodbc to match new type usage in unixodbc API
1005 * Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
1006 - add pointer to Red Hat documentation in docdir
1008 * Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
1009 - rebuild for dependencies
1011 * Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
1012 - upgrade to latest upstream release, upstream summary follows:
1013 The focus of this release is stability.
1014 Feature Improvements:
1015 * Allow running with "user=radiusd" and binding to secure sockets.
1016 * Start sending Status-Server "are you alive" messages earlier, which
1017 helps with proxying multiple realms to a home server.
1018 * Removed thread pool code from rlm_perl. It's not necessary.
1019 * Added example Perl configuration to raddb/modules/perl
1020 * Force OpenSSL to support certificates with SHA256. This seems to be
1021 necessary for WiMAX certs.
1023 * Fix Debian patch to allow it to build.
1024 * Fix potential NULL dereference in debugging mode on certain
1025 platforms for TTLS and PEAP inner tunnels.
1026 * Fix uninitialized memory in handling of vendor definitions
1027 * Fix parsing of quoted (but non-string) attributes in the "users" file.
1028 * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
1029 * use SUN_LEN in control socket, to avoid truncation on some platforms.
1030 * Correct internal handling of "debug condition" to prevent it from
1032 * Check return code of regcomp in "unlang", so that invalid regular
1033 expressions are caught rather than mishandled.
1034 * Make rlm_sql use <ltdl.h>. Addresses bug #610.
1035 * Document list "type = status" better. Closes bug #580.
1036 * Set "default days" for certificates, because OpenSSL won't do it.
1037 This closes bug #615.
1038 * Reference correct list in example raddb/modules/ldap. Closes #596.
1039 * Increase default schema size for Acct-Session-Id to 64. Closes #540.
1040 * Fix use of temporary files in dialup-admin. Closes #605 and
1041 addresses CVE-2008-4474.
1042 * Addressed a number of minor issues found by Coverity.
1043 * Added DHCP option 150 to the dictionary. Closes #618.
1045 * Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
1046 - add --with-system-libtool to configure as a workaround for
1047 undefined reference to lt__PROGRAM__LTX_preloaded_symbols
1049 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1050 - add obsoletes tag for dialupadmin subpackages which were removed
1052 * Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
1053 - add readline-devel BuildRequires
1055 * Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
1056 - Rebuild for Python 2.6
1058 * Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
1059 - make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
1060 - remove diaupadmin packages, it's not well supported and there are problems with it.
1062 * Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1063 - Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
1064 permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770
1066 * Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
1067 - upgrade to new upstream 2.1.1 release
1069 * Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
1070 - Resolves: bug #453761: FreeRADIUS %%post should not include chown -R
1071 specify file attributes for /etc/raddb/ldap.attrmap
1072 fix consistent use of tabs/spaces (rpmlint warning)
1074 * Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
1075 - upgrade to latest upstream, see Changelog for details,
1076 upstream now has more complete fix for bug #447545, local patch removed
1078 * Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
1079 - upgrade to latest upstream, see Changelog for details
1080 - resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel
1082 * Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
1083 - # Temporary fix for bug #446864, turn off optimization
1085 * Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
1086 - remove support for radrelay, it's different now
1087 - turn off default inclusion of SQL config files in radiusd.conf since SQL
1088 is an optional RPM install
1089 - remove mssql config files
1091 * Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
1092 - Upgrade to current upstream 2.0.3 release
1093 - Many thanks to Enrico Scholz for his spec file suggestions incorporated here
1094 - Resolve: bug #438665: Contains files owned by buildsystem
1095 - Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
1096 to further partition external dependencies.
1097 - Clean up some unnecessary requires dependencies
1098 - Add versioned requires between subpackages
1100 * Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
1101 - add Requires for versioned perl (libperl.so)
1103 * Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
1104 - upgrade to new 2.0 release
1105 - split into subpackages for more fine grained installation
1107 * Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
1108 - Autorebuild for GCC 4.3
1110 * Thu Dec 06 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
1113 * Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
1114 - add support in rlm_ldap for reading clients from ldap
1115 - fix TLS parameter controling if a cert which fails to validate
1116 will be accepted (i.e. self-signed),
1117 rlm_ldap config parameter=tls_require_cert
1118 ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
1119 ldap_set_option() when it should have been ldap_int_tls_config()
1121 * Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
1122 - add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
1124 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
1125 - made init script fully lsb conform
1127 * Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
1128 - fixed initscript problem (rhbz#292521)
1130 * Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
1131 - fixed initscript for LSB (rhbz#243671, rhbz#243928)
1134 * Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
1136 - install snmp MIB files
1137 - dropped LDAP_DEPRECATED flag, it is upstream
1138 - marked config files for sub packages as config (rhbz#240400)
1139 - moved db files to /var/lib/raddb (rhbz#199082)
1141 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
1142 - radiusd expects /etc/raddb to not be world readable or writable
1143 /etc/raddb now belongs to radiusd, post script sets permissions
1145 * Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
1148 * Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
1150 - no /etc/raddb/otppasswd.sample anymore
1151 - build is pie by default, dropped pie patch
1152 - fixed build requirement for perl (perl-devel)
1154 * Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
1155 - remove trailing dot from summary
1157 - fix post/postun/preun requirements
1160 * Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
1161 - rebuild for new postgresql library version
1163 * Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
1164 - fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
1167 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
1168 - new version 1.1.3 with lots of upstream bug fixes, some security fixes
1171 * Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
1172 - commented out include for sql.conf in radiusd.conf (#202561)
1174 * Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
1177 * Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
1180 * Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
1182 - fixed incorrect rlm_sql globbing (#189095)
1183 Thanks to Yanko Kaneti for the fix.
1184 - fixed chown syntax in post script (#182777)
1185 - dropped gcc34, libdir and realloc-return patch
1186 - spec file cleanup with additional libtool build fixes
1188 * Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
1189 - bump again for double-long bug on ppc(64)
1191 * Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
1192 - rebuilt for new gcc4.1 snapshot and glibc changes
1194 * Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
1197 * Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
1200 * Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
1201 - Rebuild due to mysql update.
1203 * Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
1204 - rebuilt with new openssl
1205 - fixed ignored return value of realloc
1207 * Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
1208 - use include instead of pam_stack in pam config
1210 * Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
1211 - added missing build requires for libtool-ltdl-devel (#160877)
1212 - modified file list to get a report for missing plugins
1214 * Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
1216 - droppend radrelay patch (fixed upstream)
1218 * Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
1219 - rebuild against new postgresql-libs
1221 * Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
1224 * Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
1225 - rebuild for MySQL 4
1226 - switched over to installed libtool
1228 * Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
1229 - Fixed install problem of radeapclient (#138069)
1231 * Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
1233 - applied radrelay CVS patch from Kevin Bonner
1235 * Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
1236 - BuildRequires pam-devel and libtool
1237 - Fix errant text in description
1238 - Other minor cleanups
1240 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
1241 - renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
1242 configuration (#130613)
1244 * Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
1245 - fixed BuildRequires for openssl-devel (#130606)
1247 * Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
1250 * Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
1251 - added buildrequires for zlib-devel (#127162)
1252 - fixed libdir patch to prefer own libeap instead of installed one (#127168)
1253 - fixed samba account maps in LDAP for samba v3 (#127173)
1255 * Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
1256 - third "pre" release of version 1.0.0
1257 - rlm_ldap is using SASLv2 (#126507)
1259 * Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
1262 * Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
1263 - fixed BuildRequires for gdbm-devel
1265 * Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
1266 - gcc34 compilation fixes
1268 * Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
1271 * Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
1272 - added sql scripts for rlm_sql to documentation (#116435)
1274 * Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
1277 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
1278 - using -fPIC instead of -fpic for s390 ans s390x
1280 * Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
1281 - radiusd is pie, now
1283 * Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
1284 - new version 0.9.3 (bugfix release)
1286 * Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
1289 * Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
1292 * Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
1293 - modify default PAM configuration to remove the directory part of the module
1294 name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
1295 multilib systems will always load the right module for the architecture
1296 - modify default PAM configuration to use pam_stack
1298 * Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
1299 - com_err.h moved to /usr/include/et
1301 * Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
1304 * Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
1305 - new version 0.9.0 pre3
1307 * Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
1308 - included directory /var/log/radius/radacct for logrotate
1310 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
1311 - moved log and run dir to files section, cleaned up post
1313 * Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
1314 - added missing run dir in post
1316 * Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
1317 - fixed module load patch
1319 * Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
1320 - removed la files, removed devel package
1321 - split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
1323 - fixed requires and buildrequires
1324 - create logging dir in post if it does not exist
1325 - fixed module load without la files
1327 * Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>