hostapd: Add a config option to control beaconing
[mech_eap.git] / src / ap / hostapd.c
1 /*
2  * hostapd / Initialization and configuration
3  * Copyright (c) 2002-2012, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  */
8
9 #include "utils/includes.h"
10
11 #include "utils/common.h"
12 #include "utils/eloop.h"
13 #include "common/ieee802_11_defs.h"
14 #include "radius/radius_client.h"
15 #include "radius/radius_das.h"
16 #include "drivers/driver.h"
17 #include "hostapd.h"
18 #include "authsrv.h"
19 #include "sta_info.h"
20 #include "accounting.h"
21 #include "ap_list.h"
22 #include "beacon.h"
23 #include "iapp.h"
24 #include "ieee802_1x.h"
25 #include "ieee802_11_auth.h"
26 #include "vlan_init.h"
27 #include "wpa_auth.h"
28 #include "wps_hostapd.h"
29 #include "hw_features.h"
30 #include "wpa_auth_glue.h"
31 #include "ap_drv_ops.h"
32 #include "ap_config.h"
33 #include "p2p_hostapd.h"
34 #include "gas_serv.h"
35
36
37 static int hostapd_flush_old_stations(struct hostapd_data *hapd, u16 reason);
38 static int hostapd_setup_encryption(char *iface, struct hostapd_data *hapd);
39 static int hostapd_broadcast_wep_clear(struct hostapd_data *hapd);
40
41 extern int wpa_debug_level;
42 extern struct wpa_driver_ops *wpa_drivers[];
43
44
45 int hostapd_for_each_interface(struct hapd_interfaces *interfaces,
46                                int (*cb)(struct hostapd_iface *iface,
47                                          void *ctx), void *ctx)
48 {
49         size_t i;
50         int ret;
51
52         for (i = 0; i < interfaces->count; i++) {
53                 ret = cb(interfaces->iface[i], ctx);
54                 if (ret)
55                         return ret;
56         }
57
58         return 0;
59 }
60
61
62 static void hostapd_reload_bss(struct hostapd_data *hapd)
63 {
64 #ifndef CONFIG_NO_RADIUS
65         radius_client_reconfig(hapd->radius, hapd->conf->radius);
66 #endif /* CONFIG_NO_RADIUS */
67
68         if (hostapd_setup_wpa_psk(hapd->conf)) {
69                 wpa_printf(MSG_ERROR, "Failed to re-configure WPA PSK "
70                            "after reloading configuration");
71         }
72
73         if (hapd->conf->ieee802_1x || hapd->conf->wpa)
74                 hostapd_set_drv_ieee8021x(hapd, hapd->conf->iface, 1);
75         else
76                 hostapd_set_drv_ieee8021x(hapd, hapd->conf->iface, 0);
77
78         if (hapd->conf->wpa && hapd->wpa_auth == NULL) {
79                 hostapd_setup_wpa(hapd);
80                 if (hapd->wpa_auth)
81                         wpa_init_keys(hapd->wpa_auth);
82         } else if (hapd->conf->wpa) {
83                 const u8 *wpa_ie;
84                 size_t wpa_ie_len;
85                 hostapd_reconfig_wpa(hapd);
86                 wpa_ie = wpa_auth_get_wpa_ie(hapd->wpa_auth, &wpa_ie_len);
87                 if (hostapd_set_generic_elem(hapd, wpa_ie, wpa_ie_len))
88                         wpa_printf(MSG_ERROR, "Failed to configure WPA IE for "
89                                    "the kernel driver.");
90         } else if (hapd->wpa_auth) {
91                 wpa_deinit(hapd->wpa_auth);
92                 hapd->wpa_auth = NULL;
93                 hostapd_set_privacy(hapd, 0);
94                 hostapd_setup_encryption(hapd->conf->iface, hapd);
95                 hostapd_set_generic_elem(hapd, (u8 *) "", 0);
96         }
97
98         ieee802_11_set_beacon(hapd);
99         hostapd_update_wps(hapd);
100
101         if (hapd->conf->ssid.ssid_set &&
102             hostapd_set_ssid(hapd, hapd->conf->ssid.ssid,
103                              hapd->conf->ssid.ssid_len)) {
104                 wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver");
105                 /* try to continue */
106         }
107         wpa_printf(MSG_DEBUG, "Reconfigured interface %s", hapd->conf->iface);
108 }
109
110
111 static void hostapd_clear_old(struct hostapd_iface *iface)
112 {
113         size_t j;
114
115         /*
116          * Deauthenticate all stations since the new configuration may not
117          * allow them to use the BSS anymore.
118          */
119         for (j = 0; j < iface->num_bss; j++) {
120                 hostapd_flush_old_stations(iface->bss[j],
121                                            WLAN_REASON_PREV_AUTH_NOT_VALID);
122                 hostapd_broadcast_wep_clear(iface->bss[j]);
123
124 #ifndef CONFIG_NO_RADIUS
125                 /* TODO: update dynamic data based on changed configuration
126                  * items (e.g., open/close sockets, etc.) */
127                 radius_client_flush(iface->bss[j]->radius, 0);
128 #endif /* CONFIG_NO_RADIUS */
129         }
130 }
131
132
133 int hostapd_reload_config(struct hostapd_iface *iface)
134 {
135         struct hostapd_data *hapd = iface->bss[0];
136         struct hostapd_config *newconf, *oldconf;
137         size_t j;
138
139         if (iface->config_fname == NULL) {
140                 /* Only in-memory config in use - assume it has been updated */
141                 hostapd_clear_old(iface);
142                 for (j = 0; j < iface->num_bss; j++)
143                         hostapd_reload_bss(iface->bss[j]);
144                 return 0;
145         }
146
147         if (iface->interfaces == NULL ||
148             iface->interfaces->config_read_cb == NULL)
149                 return -1;
150         newconf = iface->interfaces->config_read_cb(iface->config_fname);
151         if (newconf == NULL)
152                 return -1;
153
154         hostapd_clear_old(iface);
155
156         oldconf = hapd->iconf;
157         iface->conf = newconf;
158
159         for (j = 0; j < iface->num_bss; j++) {
160                 hapd = iface->bss[j];
161                 hapd->iconf = newconf;
162                 hapd->conf = &newconf->bss[j];
163                 hostapd_reload_bss(hapd);
164         }
165
166         hostapd_config_free(oldconf);
167
168
169         return 0;
170 }
171
172
173 static void hostapd_broadcast_key_clear_iface(struct hostapd_data *hapd,
174                                               char *ifname)
175 {
176         int i;
177
178         for (i = 0; i < NUM_WEP_KEYS; i++) {
179                 if (hostapd_drv_set_key(ifname, hapd, WPA_ALG_NONE, NULL, i,
180                                         0, NULL, 0, NULL, 0)) {
181                         wpa_printf(MSG_DEBUG, "Failed to clear default "
182                                    "encryption keys (ifname=%s keyidx=%d)",
183                                    ifname, i);
184                 }
185         }
186 #ifdef CONFIG_IEEE80211W
187         if (hapd->conf->ieee80211w) {
188                 for (i = NUM_WEP_KEYS; i < NUM_WEP_KEYS + 2; i++) {
189                         if (hostapd_drv_set_key(ifname, hapd, WPA_ALG_NONE,
190                                                 NULL, i, 0, NULL,
191                                                 0, NULL, 0)) {
192                                 wpa_printf(MSG_DEBUG, "Failed to clear "
193                                            "default mgmt encryption keys "
194                                            "(ifname=%s keyidx=%d)", ifname, i);
195                         }
196                 }
197         }
198 #endif /* CONFIG_IEEE80211W */
199 }
200
201
202 static int hostapd_broadcast_wep_clear(struct hostapd_data *hapd)
203 {
204         hostapd_broadcast_key_clear_iface(hapd, hapd->conf->iface);
205         return 0;
206 }
207
208
209 static int hostapd_broadcast_wep_set(struct hostapd_data *hapd)
210 {
211         int errors = 0, idx;
212         struct hostapd_ssid *ssid = &hapd->conf->ssid;
213
214         idx = ssid->wep.idx;
215         if (ssid->wep.default_len &&
216             hostapd_drv_set_key(hapd->conf->iface,
217                                 hapd, WPA_ALG_WEP, broadcast_ether_addr, idx,
218                                 1, NULL, 0, ssid->wep.key[idx],
219                                 ssid->wep.len[idx])) {
220                 wpa_printf(MSG_WARNING, "Could not set WEP encryption.");
221                 errors++;
222         }
223
224         if (ssid->dyn_vlan_keys) {
225                 size_t i;
226                 for (i = 0; i <= ssid->max_dyn_vlan_keys; i++) {
227                         const char *ifname;
228                         struct hostapd_wep_keys *key = ssid->dyn_vlan_keys[i];
229                         if (key == NULL)
230                                 continue;
231                         ifname = hostapd_get_vlan_id_ifname(hapd->conf->vlan,
232                                                             i);
233                         if (ifname == NULL)
234                                 continue;
235
236                         idx = key->idx;
237                         if (hostapd_drv_set_key(ifname, hapd, WPA_ALG_WEP,
238                                                 broadcast_ether_addr, idx, 1,
239                                                 NULL, 0, key->key[idx],
240                                                 key->len[idx])) {
241                                 wpa_printf(MSG_WARNING, "Could not set "
242                                            "dynamic VLAN WEP encryption.");
243                                 errors++;
244                         }
245                 }
246         }
247
248         return errors;
249 }
250
251
252 static void hostapd_free_hapd_data(struct hostapd_data *hapd)
253 {
254         iapp_deinit(hapd->iapp);
255         hapd->iapp = NULL;
256         accounting_deinit(hapd);
257         hostapd_deinit_wpa(hapd);
258         vlan_deinit(hapd);
259         hostapd_acl_deinit(hapd);
260 #ifndef CONFIG_NO_RADIUS
261         radius_client_deinit(hapd->radius);
262         hapd->radius = NULL;
263         radius_das_deinit(hapd->radius_das);
264         hapd->radius_das = NULL;
265 #endif /* CONFIG_NO_RADIUS */
266
267         hostapd_deinit_wps(hapd);
268
269         authsrv_deinit(hapd);
270
271         if (hapd->interface_added &&
272             hostapd_if_remove(hapd, WPA_IF_AP_BSS, hapd->conf->iface)) {
273                 wpa_printf(MSG_WARNING, "Failed to remove BSS interface %s",
274                            hapd->conf->iface);
275         }
276
277         os_free(hapd->probereq_cb);
278         hapd->probereq_cb = NULL;
279
280 #ifdef CONFIG_P2P
281         wpabuf_free(hapd->p2p_beacon_ie);
282         hapd->p2p_beacon_ie = NULL;
283         wpabuf_free(hapd->p2p_probe_resp_ie);
284         hapd->p2p_probe_resp_ie = NULL;
285 #endif /* CONFIG_P2P */
286
287         wpabuf_free(hapd->time_adv);
288
289 #ifdef CONFIG_INTERWORKING
290         gas_serv_deinit(hapd);
291 #endif /* CONFIG_INTERWORKING */
292
293 #ifdef CONFIG_SQLITE
294         os_free(hapd->tmp_eap_user.identity);
295         os_free(hapd->tmp_eap_user.password);
296 #endif /* CONFIG_SQLITE */
297 }
298
299
300 /**
301  * hostapd_cleanup - Per-BSS cleanup (deinitialization)
302  * @hapd: Pointer to BSS data
303  *
304  * This function is used to free all per-BSS data structures and resources.
305  * This gets called in a loop for each BSS between calls to
306  * hostapd_cleanup_iface_pre() and hostapd_cleanup_iface() when an interface
307  * is deinitialized. Most of the modules that are initialized in
308  * hostapd_setup_bss() are deinitialized here.
309  */
310 static void hostapd_cleanup(struct hostapd_data *hapd)
311 {
312         if (hapd->iface->interfaces &&
313             hapd->iface->interfaces->ctrl_iface_deinit)
314                 hapd->iface->interfaces->ctrl_iface_deinit(hapd);
315         hostapd_free_hapd_data(hapd);
316 }
317
318
319 /**
320  * hostapd_cleanup_iface_pre - Preliminary per-interface cleanup
321  * @iface: Pointer to interface data
322  *
323  * This function is called before per-BSS data structures are deinitialized
324  * with hostapd_cleanup().
325  */
326 static void hostapd_cleanup_iface_pre(struct hostapd_iface *iface)
327 {
328 }
329
330
331 static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface)
332 {
333         hostapd_free_hw_features(iface->hw_features, iface->num_hw_features);
334         iface->hw_features = NULL;
335         os_free(iface->current_rates);
336         iface->current_rates = NULL;
337         os_free(iface->basic_rates);
338         iface->basic_rates = NULL;
339         ap_list_deinit(iface);
340 }
341
342
343 /**
344  * hostapd_cleanup_iface - Complete per-interface cleanup
345  * @iface: Pointer to interface data
346  *
347  * This function is called after per-BSS data structures are deinitialized
348  * with hostapd_cleanup().
349  */
350 static void hostapd_cleanup_iface(struct hostapd_iface *iface)
351 {
352         hostapd_cleanup_iface_partial(iface);
353         hostapd_config_free(iface->conf);
354         iface->conf = NULL;
355
356         os_free(iface->config_fname);
357         os_free(iface->bss);
358         os_free(iface);
359 }
360
361
362 static void hostapd_clear_wep(struct hostapd_data *hapd)
363 {
364         if (hapd->drv_priv) {
365                 hostapd_set_privacy(hapd, 0);
366                 hostapd_broadcast_wep_clear(hapd);
367         }
368 }
369
370
371 static int hostapd_setup_encryption(char *iface, struct hostapd_data *hapd)
372 {
373         int i;
374
375         hostapd_broadcast_wep_set(hapd);
376
377         if (hapd->conf->ssid.wep.default_len) {
378                 hostapd_set_privacy(hapd, 1);
379                 return 0;
380         }
381
382         /*
383          * When IEEE 802.1X is not enabled, the driver may need to know how to
384          * set authentication algorithms for static WEP.
385          */
386         hostapd_drv_set_authmode(hapd, hapd->conf->auth_algs);
387
388         for (i = 0; i < 4; i++) {
389                 if (hapd->conf->ssid.wep.key[i] &&
390                     hostapd_drv_set_key(iface, hapd, WPA_ALG_WEP, NULL, i,
391                                         i == hapd->conf->ssid.wep.idx, NULL, 0,
392                                         hapd->conf->ssid.wep.key[i],
393                                         hapd->conf->ssid.wep.len[i])) {
394                         wpa_printf(MSG_WARNING, "Could not set WEP "
395                                    "encryption.");
396                         return -1;
397                 }
398                 if (hapd->conf->ssid.wep.key[i] &&
399                     i == hapd->conf->ssid.wep.idx)
400                         hostapd_set_privacy(hapd, 1);
401         }
402
403         return 0;
404 }
405
406
407 static int hostapd_flush_old_stations(struct hostapd_data *hapd, u16 reason)
408 {
409         int ret = 0;
410         u8 addr[ETH_ALEN];
411
412         if (hostapd_drv_none(hapd) || hapd->drv_priv == NULL)
413                 return 0;
414
415         wpa_dbg(hapd->msg_ctx, MSG_DEBUG, "Flushing old station entries");
416         if (hostapd_flush(hapd)) {
417                 wpa_msg(hapd->msg_ctx, MSG_WARNING, "Could not connect to "
418                         "kernel driver");
419                 ret = -1;
420         }
421         wpa_dbg(hapd->msg_ctx, MSG_DEBUG, "Deauthenticate all stations");
422         os_memset(addr, 0xff, ETH_ALEN);
423         hostapd_drv_sta_deauth(hapd, addr, reason);
424         hostapd_free_stas(hapd);
425
426         return ret;
427 }
428
429
430 /**
431  * hostapd_validate_bssid_configuration - Validate BSSID configuration
432  * @iface: Pointer to interface data
433  * Returns: 0 on success, -1 on failure
434  *
435  * This function is used to validate that the configured BSSIDs are valid.
436  */
437 static int hostapd_validate_bssid_configuration(struct hostapd_iface *iface)
438 {
439         u8 mask[ETH_ALEN] = { 0 };
440         struct hostapd_data *hapd = iface->bss[0];
441         unsigned int i = iface->conf->num_bss, bits = 0, j;
442         int auto_addr = 0;
443
444         if (hostapd_drv_none(hapd))
445                 return 0;
446
447         /* Generate BSSID mask that is large enough to cover the BSSIDs. */
448
449         /* Determine the bits necessary to cover the number of BSSIDs. */
450         for (i--; i; i >>= 1)
451                 bits++;
452
453         /* Determine the bits necessary to any configured BSSIDs,
454            if they are higher than the number of BSSIDs. */
455         for (j = 0; j < iface->conf->num_bss; j++) {
456                 if (hostapd_mac_comp_empty(iface->conf->bss[j].bssid) == 0) {
457                         if (j)
458                                 auto_addr++;
459                         continue;
460                 }
461
462                 for (i = 0; i < ETH_ALEN; i++) {
463                         mask[i] |=
464                                 iface->conf->bss[j].bssid[i] ^
465                                 hapd->own_addr[i];
466                 }
467         }
468
469         if (!auto_addr)
470                 goto skip_mask_ext;
471
472         for (i = 0; i < ETH_ALEN && mask[i] == 0; i++)
473                 ;
474         j = 0;
475         if (i < ETH_ALEN) {
476                 j = (5 - i) * 8;
477
478                 while (mask[i] != 0) {
479                         mask[i] >>= 1;
480                         j++;
481                 }
482         }
483
484         if (bits < j)
485                 bits = j;
486
487         if (bits > 40) {
488                 wpa_printf(MSG_ERROR, "Too many bits in the BSSID mask (%u)",
489                            bits);
490                 return -1;
491         }
492
493         os_memset(mask, 0xff, ETH_ALEN);
494         j = bits / 8;
495         for (i = 5; i > 5 - j; i--)
496                 mask[i] = 0;
497         j = bits % 8;
498         while (j--)
499                 mask[i] <<= 1;
500
501 skip_mask_ext:
502         wpa_printf(MSG_DEBUG, "BSS count %lu, BSSID mask " MACSTR " (%d bits)",
503                    (unsigned long) iface->conf->num_bss, MAC2STR(mask), bits);
504
505         if (!auto_addr)
506                 return 0;
507
508         for (i = 0; i < ETH_ALEN; i++) {
509                 if ((hapd->own_addr[i] & mask[i]) != hapd->own_addr[i]) {
510                         wpa_printf(MSG_ERROR, "Invalid BSSID mask " MACSTR
511                                    " for start address " MACSTR ".",
512                                    MAC2STR(mask), MAC2STR(hapd->own_addr));
513                         wpa_printf(MSG_ERROR, "Start address must be the "
514                                    "first address in the block (i.e., addr "
515                                    "AND mask == addr).");
516                         return -1;
517                 }
518         }
519
520         return 0;
521 }
522
523
524 static int mac_in_conf(struct hostapd_config *conf, const void *a)
525 {
526         size_t i;
527
528         for (i = 0; i < conf->num_bss; i++) {
529                 if (hostapd_mac_comp(conf->bss[i].bssid, a) == 0) {
530                         return 1;
531                 }
532         }
533
534         return 0;
535 }
536
537
538 #ifndef CONFIG_NO_RADIUS
539
540 static int hostapd_das_nas_mismatch(struct hostapd_data *hapd,
541                                     struct radius_das_attrs *attr)
542 {
543         /* TODO */
544         return 0;
545 }
546
547
548 static struct sta_info * hostapd_das_find_sta(struct hostapd_data *hapd,
549                                               struct radius_das_attrs *attr)
550 {
551         struct sta_info *sta = NULL;
552         char buf[128];
553
554         if (attr->sta_addr)
555                 sta = ap_get_sta(hapd, attr->sta_addr);
556
557         if (sta == NULL && attr->acct_session_id &&
558             attr->acct_session_id_len == 17) {
559                 for (sta = hapd->sta_list; sta; sta = sta->next) {
560                         os_snprintf(buf, sizeof(buf), "%08X-%08X",
561                                     sta->acct_session_id_hi,
562                                     sta->acct_session_id_lo);
563                         if (os_memcmp(attr->acct_session_id, buf, 17) == 0)
564                                 break;
565                 }
566         }
567
568         if (sta == NULL && attr->cui) {
569                 for (sta = hapd->sta_list; sta; sta = sta->next) {
570                         struct wpabuf *cui;
571                         cui = ieee802_1x_get_radius_cui(sta->eapol_sm);
572                         if (cui && wpabuf_len(cui) == attr->cui_len &&
573                             os_memcmp(wpabuf_head(cui), attr->cui,
574                                       attr->cui_len) == 0)
575                                 break;
576                 }
577         }
578
579         if (sta == NULL && attr->user_name) {
580                 for (sta = hapd->sta_list; sta; sta = sta->next) {
581                         u8 *identity;
582                         size_t identity_len;
583                         identity = ieee802_1x_get_identity(sta->eapol_sm,
584                                                            &identity_len);
585                         if (identity &&
586                             identity_len == attr->user_name_len &&
587                             os_memcmp(identity, attr->user_name, identity_len)
588                             == 0)
589                                 break;
590                 }
591         }
592
593         return sta;
594 }
595
596
597 static enum radius_das_res
598 hostapd_das_disconnect(void *ctx, struct radius_das_attrs *attr)
599 {
600         struct hostapd_data *hapd = ctx;
601         struct sta_info *sta;
602
603         if (hostapd_das_nas_mismatch(hapd, attr))
604                 return RADIUS_DAS_NAS_MISMATCH;
605
606         sta = hostapd_das_find_sta(hapd, attr);
607         if (sta == NULL)
608                 return RADIUS_DAS_SESSION_NOT_FOUND;
609
610         hostapd_drv_sta_deauth(hapd, sta->addr,
611                                WLAN_REASON_PREV_AUTH_NOT_VALID);
612         ap_sta_deauthenticate(hapd, sta, WLAN_REASON_PREV_AUTH_NOT_VALID);
613
614         return RADIUS_DAS_SUCCESS;
615 }
616
617 #endif /* CONFIG_NO_RADIUS */
618
619
620 /**
621  * hostapd_setup_bss - Per-BSS setup (initialization)
622  * @hapd: Pointer to BSS data
623  * @first: Whether this BSS is the first BSS of an interface
624  *
625  * This function is used to initialize all per-BSS data structures and
626  * resources. This gets called in a loop for each BSS when an interface is
627  * initialized. Most of the modules that are initialized here will be
628  * deinitialized in hostapd_cleanup().
629  */
630 static int hostapd_setup_bss(struct hostapd_data *hapd, int first)
631 {
632         struct hostapd_bss_config *conf = hapd->conf;
633         u8 ssid[HOSTAPD_MAX_SSID_LEN + 1];
634         int ssid_len, set_ssid;
635         char force_ifname[IFNAMSIZ];
636         u8 if_addr[ETH_ALEN];
637
638         if (!first) {
639                 if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0) {
640                         /* Allocate the next available BSSID. */
641                         do {
642                                 inc_byte_array(hapd->own_addr, ETH_ALEN);
643                         } while (mac_in_conf(hapd->iconf, hapd->own_addr));
644                 } else {
645                         /* Allocate the configured BSSID. */
646                         os_memcpy(hapd->own_addr, hapd->conf->bssid, ETH_ALEN);
647
648                         if (hostapd_mac_comp(hapd->own_addr,
649                                              hapd->iface->bss[0]->own_addr) ==
650                             0) {
651                                 wpa_printf(MSG_ERROR, "BSS '%s' may not have "
652                                            "BSSID set to the MAC address of "
653                                            "the radio", hapd->conf->iface);
654                                 return -1;
655                         }
656                 }
657
658                 hapd->interface_added = 1;
659                 if (hostapd_if_add(hapd->iface->bss[0], WPA_IF_AP_BSS,
660                                    hapd->conf->iface, hapd->own_addr, hapd,
661                                    &hapd->drv_priv, force_ifname, if_addr,
662                                    hapd->conf->bridge[0] ? hapd->conf->bridge :
663                                    NULL)) {
664                         wpa_printf(MSG_ERROR, "Failed to add BSS (BSSID="
665                                    MACSTR ")", MAC2STR(hapd->own_addr));
666                         return -1;
667                 }
668         }
669
670         if (conf->wmm_enabled < 0)
671                 conf->wmm_enabled = hapd->iconf->ieee80211n;
672
673         hostapd_flush_old_stations(hapd, WLAN_REASON_PREV_AUTH_NOT_VALID);
674         hostapd_set_privacy(hapd, 0);
675
676         hostapd_broadcast_wep_clear(hapd);
677         if (hostapd_setup_encryption(hapd->conf->iface, hapd))
678                 return -1;
679
680         /*
681          * Fetch the SSID from the system and use it or,
682          * if one was specified in the config file, verify they
683          * match.
684          */
685         ssid_len = hostapd_get_ssid(hapd, ssid, sizeof(ssid));
686         if (ssid_len < 0) {
687                 wpa_printf(MSG_ERROR, "Could not read SSID from system");
688                 return -1;
689         }
690         if (conf->ssid.ssid_set) {
691                 /*
692                  * If SSID is specified in the config file and it differs
693                  * from what is being used then force installation of the
694                  * new SSID.
695                  */
696                 set_ssid = (conf->ssid.ssid_len != (size_t) ssid_len ||
697                             os_memcmp(conf->ssid.ssid, ssid, ssid_len) != 0);
698         } else {
699                 /*
700                  * No SSID in the config file; just use the one we got
701                  * from the system.
702                  */
703                 set_ssid = 0;
704                 conf->ssid.ssid_len = ssid_len;
705                 os_memcpy(conf->ssid.ssid, ssid, conf->ssid.ssid_len);
706         }
707
708         if (!hostapd_drv_none(hapd)) {
709                 wpa_printf(MSG_ERROR, "Using interface %s with hwaddr " MACSTR
710                            " and ssid \"%s\"",
711                            hapd->conf->iface, MAC2STR(hapd->own_addr),
712                            wpa_ssid_txt(hapd->conf->ssid.ssid,
713                                         hapd->conf->ssid.ssid_len));
714         }
715
716         if (hostapd_setup_wpa_psk(conf)) {
717                 wpa_printf(MSG_ERROR, "WPA-PSK setup failed.");
718                 return -1;
719         }
720
721         /* Set SSID for the kernel driver (to be used in beacon and probe
722          * response frames) */
723         if (set_ssid && hostapd_set_ssid(hapd, conf->ssid.ssid,
724                                          conf->ssid.ssid_len)) {
725                 wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver");
726                 return -1;
727         }
728
729         if (wpa_debug_level == MSG_MSGDUMP)
730                 conf->radius->msg_dumps = 1;
731 #ifndef CONFIG_NO_RADIUS
732         hapd->radius = radius_client_init(hapd, conf->radius);
733         if (hapd->radius == NULL) {
734                 wpa_printf(MSG_ERROR, "RADIUS client initialization failed.");
735                 return -1;
736         }
737
738         if (hapd->conf->radius_das_port) {
739                 struct radius_das_conf das_conf;
740                 os_memset(&das_conf, 0, sizeof(das_conf));
741                 das_conf.port = hapd->conf->radius_das_port;
742                 das_conf.shared_secret = hapd->conf->radius_das_shared_secret;
743                 das_conf.shared_secret_len =
744                         hapd->conf->radius_das_shared_secret_len;
745                 das_conf.client_addr = &hapd->conf->radius_das_client_addr;
746                 das_conf.time_window = hapd->conf->radius_das_time_window;
747                 das_conf.require_event_timestamp =
748                         hapd->conf->radius_das_require_event_timestamp;
749                 das_conf.ctx = hapd;
750                 das_conf.disconnect = hostapd_das_disconnect;
751                 hapd->radius_das = radius_das_init(&das_conf);
752                 if (hapd->radius_das == NULL) {
753                         wpa_printf(MSG_ERROR, "RADIUS DAS initialization "
754                                    "failed.");
755                         return -1;
756                 }
757         }
758 #endif /* CONFIG_NO_RADIUS */
759
760         if (hostapd_acl_init(hapd)) {
761                 wpa_printf(MSG_ERROR, "ACL initialization failed.");
762                 return -1;
763         }
764         if (hostapd_init_wps(hapd, conf))
765                 return -1;
766
767         if (authsrv_init(hapd) < 0)
768                 return -1;
769
770         if (ieee802_1x_init(hapd)) {
771                 wpa_printf(MSG_ERROR, "IEEE 802.1X initialization failed.");
772                 return -1;
773         }
774
775         if (hapd->conf->wpa && hostapd_setup_wpa(hapd))
776                 return -1;
777
778         if (accounting_init(hapd)) {
779                 wpa_printf(MSG_ERROR, "Accounting initialization failed.");
780                 return -1;
781         }
782
783         if (hapd->conf->ieee802_11f &&
784             (hapd->iapp = iapp_init(hapd, hapd->conf->iapp_iface)) == NULL) {
785                 wpa_printf(MSG_ERROR, "IEEE 802.11F (IAPP) initialization "
786                            "failed.");
787                 return -1;
788         }
789
790 #ifdef CONFIG_INTERWORKING
791         if (gas_serv_init(hapd)) {
792                 wpa_printf(MSG_ERROR, "GAS server initialization failed");
793                 return -1;
794         }
795 #endif /* CONFIG_INTERWORKING */
796
797         if (hapd->iface->interfaces &&
798             hapd->iface->interfaces->ctrl_iface_init &&
799             hapd->iface->interfaces->ctrl_iface_init(hapd)) {
800                 wpa_printf(MSG_ERROR, "Failed to setup control interface");
801                 return -1;
802         }
803
804         if (!hostapd_drv_none(hapd) && vlan_init(hapd)) {
805                 wpa_printf(MSG_ERROR, "VLAN initialization failed.");
806                 return -1;
807         }
808
809         if (!hapd->conf->start_disabled)
810                 ieee802_11_set_beacon(hapd);
811
812         if (hapd->wpa_auth && wpa_init_keys(hapd->wpa_auth) < 0)
813                 return -1;
814
815         if (hapd->driver && hapd->driver->set_operstate)
816                 hapd->driver->set_operstate(hapd->drv_priv, 1);
817
818         return 0;
819 }
820
821
822 static void hostapd_tx_queue_params(struct hostapd_iface *iface)
823 {
824         struct hostapd_data *hapd = iface->bss[0];
825         int i;
826         struct hostapd_tx_queue_params *p;
827
828         for (i = 0; i < NUM_TX_QUEUES; i++) {
829                 p = &iface->conf->tx_queue[i];
830
831                 if (hostapd_set_tx_queue_params(hapd, i, p->aifs, p->cwmin,
832                                                 p->cwmax, p->burst)) {
833                         wpa_printf(MSG_DEBUG, "Failed to set TX queue "
834                                    "parameters for queue %d.", i);
835                         /* Continue anyway */
836                 }
837         }
838 }
839
840
841 static int hostapd_set_acl_list(struct hostapd_data *hapd,
842                                 struct mac_acl_entry *mac_acl,
843                                 int n_entries, u8 accept_acl)
844 {
845         struct hostapd_acl_params *acl_params;
846         int i, err;
847
848         acl_params = os_zalloc(sizeof(*acl_params) +
849                                (n_entries * sizeof(acl_params->mac_acl[0])));
850         if (!acl_params)
851                 return -ENOMEM;
852
853         for (i = 0; i < n_entries; i++)
854                 os_memcpy(acl_params->mac_acl[i].addr, mac_acl[i].addr,
855                           ETH_ALEN);
856
857         acl_params->acl_policy = accept_acl;
858         acl_params->num_mac_acl = n_entries;
859
860         err = hostapd_drv_set_acl(hapd, acl_params);
861
862         os_free(acl_params);
863
864         return err;
865 }
866
867
868 static void hostapd_set_acl(struct hostapd_data *hapd)
869 {
870         struct hostapd_config *conf = hapd->iconf;
871         int err;
872         u8 accept_acl;
873
874         if (hapd->iface->drv_max_acl_mac_addrs == 0)
875                 return;
876         if (!(conf->bss->num_accept_mac || conf->bss->num_deny_mac))
877                 return;
878
879         if (conf->bss->macaddr_acl == DENY_UNLESS_ACCEPTED) {
880                 if (conf->bss->num_accept_mac) {
881                         accept_acl = 1;
882                         err = hostapd_set_acl_list(hapd, conf->bss->accept_mac,
883                                                    conf->bss->num_accept_mac,
884                                                    accept_acl);
885                         if (err) {
886                                 wpa_printf(MSG_DEBUG, "Failed to set accept acl");
887                                 return;
888                         }
889                 } else {
890                         wpa_printf(MSG_DEBUG, "Mismatch between ACL Policy & Accept/deny lists file");
891                 }
892         } else if (conf->bss->macaddr_acl == ACCEPT_UNLESS_DENIED) {
893                 if (conf->bss->num_deny_mac) {
894                         accept_acl = 0;
895                         err = hostapd_set_acl_list(hapd, conf->bss->deny_mac,
896                                                    conf->bss->num_deny_mac,
897                                                    accept_acl);
898                         if (err) {
899                                 wpa_printf(MSG_DEBUG, "Failed to set deny acl");
900                                 return;
901                         }
902                 } else {
903                         wpa_printf(MSG_DEBUG, "Mismatch between ACL Policy & Accept/deny lists file");
904                 }
905         }
906 }
907
908
909 static int setup_interface(struct hostapd_iface *iface)
910 {
911         struct hostapd_data *hapd = iface->bss[0];
912         size_t i;
913         char country[4];
914
915         /*
916          * Make sure that all BSSes get configured with a pointer to the same
917          * driver interface.
918          */
919         for (i = 1; i < iface->num_bss; i++) {
920                 iface->bss[i]->driver = hapd->driver;
921                 iface->bss[i]->drv_priv = hapd->drv_priv;
922         }
923
924         if (hostapd_validate_bssid_configuration(iface))
925                 return -1;
926
927         if (hapd->iconf->country[0] && hapd->iconf->country[1]) {
928                 os_memcpy(country, hapd->iconf->country, 3);
929                 country[3] = '\0';
930                 if (hostapd_set_country(hapd, country) < 0) {
931                         wpa_printf(MSG_ERROR, "Failed to set country code");
932                         return -1;
933                 }
934         }
935
936         if (hostapd_get_hw_features(iface)) {
937                 /* Not all drivers support this yet, so continue without hw
938                  * feature data. */
939         } else {
940                 int ret = hostapd_select_hw_mode(iface);
941                 if (ret < 0) {
942                         wpa_printf(MSG_ERROR, "Could not select hw_mode and "
943                                    "channel. (%d)", ret);
944                         return -1;
945                 }
946                 ret = hostapd_check_ht_capab(iface);
947                 if (ret < 0)
948                         return -1;
949                 if (ret == 1) {
950                         wpa_printf(MSG_DEBUG, "Interface initialization will "
951                                    "be completed in a callback");
952                         return 0;
953                 }
954         }
955         return hostapd_setup_interface_complete(iface, 0);
956 }
957
958
959 int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err)
960 {
961         struct hostapd_data *hapd = iface->bss[0];
962         size_t j;
963         u8 *prev_addr;
964
965         if (err) {
966                 wpa_printf(MSG_ERROR, "Interface initialization failed");
967                 eloop_terminate();
968                 return -1;
969         }
970
971         wpa_printf(MSG_DEBUG, "Completing interface initialization");
972         if (hapd->iconf->channel) {
973                 iface->freq = hostapd_hw_get_freq(hapd, hapd->iconf->channel);
974                 wpa_printf(MSG_DEBUG, "Mode: %s  Channel: %d  "
975                            "Frequency: %d MHz",
976                            hostapd_hw_mode_txt(hapd->iconf->hw_mode),
977                            hapd->iconf->channel, iface->freq);
978
979                 if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq,
980                                      hapd->iconf->channel,
981                                      hapd->iconf->ieee80211n,
982                                      hapd->iconf->ieee80211ac,
983                                      hapd->iconf->secondary_channel,
984                                      hapd->iconf->vht_oper_chwidth,
985                                      hapd->iconf->vht_oper_centr_freq_seg0_idx,
986                                      hapd->iconf->vht_oper_centr_freq_seg1_idx)) {
987                         wpa_printf(MSG_ERROR, "Could not set channel for "
988                                    "kernel driver");
989                         return -1;
990                 }
991         }
992
993         if (iface->current_mode) {
994                 if (hostapd_prepare_rates(iface, iface->current_mode)) {
995                         wpa_printf(MSG_ERROR, "Failed to prepare rates "
996                                    "table.");
997                         hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211,
998                                        HOSTAPD_LEVEL_WARNING,
999                                        "Failed to prepare rates table.");
1000                         return -1;
1001                 }
1002         }
1003
1004         if (hapd->iconf->rts_threshold > -1 &&
1005             hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) {
1006                 wpa_printf(MSG_ERROR, "Could not set RTS threshold for "
1007                            "kernel driver");
1008                 return -1;
1009         }
1010
1011         if (hapd->iconf->fragm_threshold > -1 &&
1012             hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) {
1013                 wpa_printf(MSG_ERROR, "Could not set fragmentation threshold "
1014                            "for kernel driver");
1015                 return -1;
1016         }
1017
1018         prev_addr = hapd->own_addr;
1019
1020         for (j = 0; j < iface->num_bss; j++) {
1021                 hapd = iface->bss[j];
1022                 if (j)
1023                         os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN);
1024                 if (hostapd_setup_bss(hapd, j == 0))
1025                         return -1;
1026                 if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0)
1027                         prev_addr = hapd->own_addr;
1028         }
1029
1030         hostapd_tx_queue_params(iface);
1031
1032         ap_list_init(iface);
1033
1034         hostapd_set_acl(hapd);
1035
1036         if (hostapd_driver_commit(hapd) < 0) {
1037                 wpa_printf(MSG_ERROR, "%s: Failed to commit driver "
1038                            "configuration", __func__);
1039                 return -1;
1040         }
1041
1042         /*
1043          * WPS UPnP module can be initialized only when the "upnp_iface" is up.
1044          * If "interface" and "upnp_iface" are the same (e.g., non-bridge
1045          * mode), the interface is up only after driver_commit, so initialize
1046          * WPS after driver_commit.
1047          */
1048         for (j = 0; j < iface->num_bss; j++) {
1049                 if (hostapd_init_wps_complete(iface->bss[j]))
1050                         return -1;
1051         }
1052
1053         if (hapd->setup_complete_cb)
1054                 hapd->setup_complete_cb(hapd->setup_complete_cb_ctx);
1055
1056         wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
1057                    iface->bss[0]->conf->iface);
1058
1059         return 0;
1060 }
1061
1062
1063 /**
1064  * hostapd_setup_interface - Setup of an interface
1065  * @iface: Pointer to interface data.
1066  * Returns: 0 on success, -1 on failure
1067  *
1068  * Initializes the driver interface, validates the configuration,
1069  * and sets driver parameters based on the configuration.
1070  * Flushes old stations, sets the channel, encryption,
1071  * beacons, and WDS links based on the configuration.
1072  */
1073 int hostapd_setup_interface(struct hostapd_iface *iface)
1074 {
1075         int ret;
1076
1077         ret = setup_interface(iface);
1078         if (ret) {
1079                 wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
1080                            iface->bss[0]->conf->iface);
1081                 return -1;
1082         }
1083
1084         return 0;
1085 }
1086
1087
1088 /**
1089  * hostapd_alloc_bss_data - Allocate and initialize per-BSS data
1090  * @hapd_iface: Pointer to interface data
1091  * @conf: Pointer to per-interface configuration
1092  * @bss: Pointer to per-BSS configuration for this BSS
1093  * Returns: Pointer to allocated BSS data
1094  *
1095  * This function is used to allocate per-BSS data structure. This data will be
1096  * freed after hostapd_cleanup() is called for it during interface
1097  * deinitialization.
1098  */
1099 struct hostapd_data *
1100 hostapd_alloc_bss_data(struct hostapd_iface *hapd_iface,
1101                        struct hostapd_config *conf,
1102                        struct hostapd_bss_config *bss)
1103 {
1104         struct hostapd_data *hapd;
1105
1106         hapd = os_zalloc(sizeof(*hapd));
1107         if (hapd == NULL)
1108                 return NULL;
1109
1110         hapd->new_assoc_sta_cb = hostapd_new_assoc_sta;
1111         hapd->iconf = conf;
1112         hapd->conf = bss;
1113         hapd->iface = hapd_iface;
1114         hapd->driver = hapd->iconf->driver;
1115         hapd->ctrl_sock = -1;
1116
1117         return hapd;
1118 }
1119
1120
1121 void hostapd_interface_deinit(struct hostapd_iface *iface)
1122 {
1123         size_t j;
1124
1125         if (iface == NULL)
1126                 return;
1127
1128         hostapd_cleanup_iface_pre(iface);
1129         for (j = 0; j < iface->num_bss; j++) {
1130                 struct hostapd_data *hapd = iface->bss[j];
1131                 hostapd_free_stas(hapd);
1132                 hostapd_flush_old_stations(hapd, WLAN_REASON_DEAUTH_LEAVING);
1133                 hostapd_clear_wep(hapd);
1134                 hostapd_cleanup(hapd);
1135         }
1136 }
1137
1138
1139 void hostapd_interface_free(struct hostapd_iface *iface)
1140 {
1141         size_t j;
1142         for (j = 0; j < iface->num_bss; j++)
1143                 os_free(iface->bss[j]);
1144         hostapd_cleanup_iface(iface);
1145 }
1146
1147
1148 #ifdef HOSTAPD
1149
1150 void hostapd_interface_deinit_free(struct hostapd_iface *iface)
1151 {
1152         const struct wpa_driver_ops *driver;
1153         void *drv_priv;
1154         if (iface == NULL)
1155                 return;
1156         driver = iface->bss[0]->driver;
1157         drv_priv = iface->bss[0]->drv_priv;
1158         hostapd_interface_deinit(iface);
1159         if (driver && driver->hapd_deinit && drv_priv)
1160                 driver->hapd_deinit(drv_priv);
1161         hostapd_interface_free(iface);
1162 }
1163
1164
1165 int hostapd_enable_iface(struct hostapd_iface *hapd_iface)
1166 {
1167         if (hapd_iface->bss[0]->drv_priv != NULL) {
1168                 wpa_printf(MSG_ERROR, "Interface %s already enabled",
1169                            hapd_iface->conf->bss[0].iface);
1170                 return -1;
1171         }
1172
1173         wpa_printf(MSG_DEBUG, "Enable interface %s",
1174                    hapd_iface->conf->bss[0].iface);
1175
1176         if (hapd_iface->interfaces == NULL ||
1177             hapd_iface->interfaces->driver_init == NULL ||
1178             hapd_iface->interfaces->driver_init(hapd_iface) ||
1179             hostapd_setup_interface(hapd_iface)) {
1180                 hostapd_interface_deinit_free(hapd_iface);
1181                 return -1;
1182         }
1183         return 0;
1184 }
1185
1186
1187 int hostapd_reload_iface(struct hostapd_iface *hapd_iface)
1188 {
1189         size_t j;
1190
1191         wpa_printf(MSG_DEBUG, "Reload interface %s",
1192                    hapd_iface->conf->bss[0].iface);
1193         for (j = 0; j < hapd_iface->num_bss; j++) {
1194                 hostapd_flush_old_stations(hapd_iface->bss[j],
1195                                            WLAN_REASON_PREV_AUTH_NOT_VALID);
1196
1197 #ifndef CONFIG_NO_RADIUS
1198                 /* TODO: update dynamic data based on changed configuration
1199                  * items (e.g., open/close sockets, etc.) */
1200                 radius_client_flush(hapd_iface->bss[j]->radius, 0);
1201 #endif  /* CONFIG_NO_RADIUS */
1202
1203                 hostapd_reload_bss(hapd_iface->bss[j]);
1204         }
1205         return 0;
1206 }
1207
1208
1209 int hostapd_disable_iface(struct hostapd_iface *hapd_iface)
1210 {
1211         size_t j;
1212         struct hostapd_bss_config *bss;
1213         const struct wpa_driver_ops *driver;
1214         void *drv_priv;
1215
1216         if (hapd_iface == NULL)
1217                 return -1;
1218         bss = hapd_iface->bss[0]->conf;
1219         driver = hapd_iface->bss[0]->driver;
1220         drv_priv = hapd_iface->bss[0]->drv_priv;
1221
1222         /* whatever hostapd_interface_deinit does */
1223         for (j = 0; j < hapd_iface->num_bss; j++) {
1224                 struct hostapd_data *hapd = hapd_iface->bss[j];
1225                 hostapd_free_stas(hapd);
1226                 hostapd_flush_old_stations(hapd, WLAN_REASON_DEAUTH_LEAVING);
1227                 hostapd_clear_wep(hapd);
1228                 hostapd_free_hapd_data(hapd);
1229         }
1230
1231         if (driver && driver->hapd_deinit && drv_priv) {
1232                 driver->hapd_deinit(drv_priv);
1233                 hapd_iface->bss[0]->drv_priv = NULL;
1234         }
1235
1236         /* From hostapd_cleanup_iface: These were initialized in
1237          * hostapd_setup_interface and hostapd_setup_interface_complete
1238          */
1239         hostapd_cleanup_iface_partial(hapd_iface);
1240         bss->wpa = 0;
1241         bss->wpa_key_mgmt = -1;
1242         bss->wpa_pairwise = -1;
1243
1244         wpa_printf(MSG_DEBUG, "Interface %s disabled", bss->iface);
1245         return 0;
1246 }
1247
1248
1249 static struct hostapd_iface *
1250 hostapd_iface_alloc(struct hapd_interfaces *interfaces)
1251 {
1252         struct hostapd_iface **iface, *hapd_iface;
1253
1254         iface = os_realloc_array(interfaces->iface, interfaces->count + 1,
1255                                  sizeof(struct hostapd_iface *));
1256         if (iface == NULL)
1257                 return NULL;
1258         interfaces->iface = iface;
1259         hapd_iface = interfaces->iface[interfaces->count] =
1260                 os_zalloc(sizeof(*hapd_iface));
1261         if (hapd_iface == NULL) {
1262                 wpa_printf(MSG_ERROR, "%s: Failed to allocate memory for "
1263                            "the interface", __func__);
1264                 return NULL;
1265         }
1266         interfaces->count++;
1267         hapd_iface->interfaces = interfaces;
1268
1269         return hapd_iface;
1270 }
1271
1272
1273 static struct hostapd_config *
1274 hostapd_config_alloc(struct hapd_interfaces *interfaces, const char *ifname,
1275                      const char *ctrl_iface)
1276 {
1277         struct hostapd_bss_config *bss;
1278         struct hostapd_config *conf;
1279
1280         /* Allocates memory for bss and conf */
1281         conf = hostapd_config_defaults();
1282         if (conf == NULL) {
1283                  wpa_printf(MSG_ERROR, "%s: Failed to allocate memory for "
1284                                 "configuration", __func__);
1285                 return NULL;
1286         }
1287
1288         conf->driver = wpa_drivers[0];
1289         if (conf->driver == NULL) {
1290                 wpa_printf(MSG_ERROR, "No driver wrappers registered!");
1291                 hostapd_config_free(conf);
1292                 return NULL;
1293         }
1294
1295         bss = conf->last_bss = conf->bss;
1296
1297         os_strlcpy(bss->iface, ifname, sizeof(bss->iface));
1298         bss->ctrl_interface = os_strdup(ctrl_iface);
1299         if (bss->ctrl_interface == NULL) {
1300                 hostapd_config_free(conf);
1301                 return NULL;
1302         }
1303
1304         /* Reading configuration file skipped, will be done in SET!
1305          * From reading the configuration till the end has to be done in
1306          * SET
1307          */
1308         return conf;
1309 }
1310
1311
1312 static struct hostapd_iface * hostapd_data_alloc(
1313         struct hapd_interfaces *interfaces, struct hostapd_config *conf)
1314 {
1315         size_t i;
1316         struct hostapd_iface *hapd_iface =
1317                 interfaces->iface[interfaces->count - 1];
1318         struct hostapd_data *hapd;
1319
1320         hapd_iface->conf = conf;
1321         hapd_iface->num_bss = conf->num_bss;
1322
1323         hapd_iface->bss = os_zalloc(conf->num_bss *
1324                                     sizeof(struct hostapd_data *));
1325         if (hapd_iface->bss == NULL)
1326                 return NULL;
1327
1328         for (i = 0; i < conf->num_bss; i++) {
1329                 hapd = hapd_iface->bss[i] =
1330                         hostapd_alloc_bss_data(hapd_iface, conf,
1331                                                &conf->bss[i]);
1332                 if (hapd == NULL)
1333                         return NULL;
1334                 hapd->msg_ctx = hapd;
1335         }
1336
1337         hapd_iface->interfaces = interfaces;
1338
1339         return hapd_iface;
1340 }
1341
1342
1343 int hostapd_add_iface(struct hapd_interfaces *interfaces, char *buf)
1344 {
1345         struct hostapd_config *conf = NULL;
1346         struct hostapd_iface *hapd_iface = NULL;
1347         char *ptr;
1348         size_t i;
1349
1350         ptr = os_strchr(buf, ' ');
1351         if (ptr == NULL)
1352                 return -1;
1353         *ptr++ = '\0';
1354
1355         for (i = 0; i < interfaces->count; i++) {
1356                 if (!os_strcmp(interfaces->iface[i]->conf->bss[0].iface,
1357                                buf)) {
1358                         wpa_printf(MSG_INFO, "Cannot add interface - it "
1359                                    "already exists");
1360                         return -1;
1361                 }
1362         }
1363
1364         hapd_iface = hostapd_iface_alloc(interfaces);
1365         if (hapd_iface == NULL) {
1366                 wpa_printf(MSG_ERROR, "%s: Failed to allocate memory "
1367                            "for interface", __func__);
1368                 goto fail;
1369         }
1370
1371         conf = hostapd_config_alloc(interfaces, buf, ptr);
1372         if (conf == NULL) {
1373                 wpa_printf(MSG_ERROR, "%s: Failed to allocate memory "
1374                            "for configuration", __func__);
1375                 goto fail;
1376         }
1377
1378         hapd_iface = hostapd_data_alloc(interfaces, conf);
1379         if (hapd_iface == NULL) {
1380                 wpa_printf(MSG_ERROR, "%s: Failed to allocate memory "
1381                            "for hostapd", __func__);
1382                 goto fail;
1383         }
1384
1385         if (hapd_iface->interfaces &&
1386             hapd_iface->interfaces->ctrl_iface_init &&
1387             hapd_iface->interfaces->ctrl_iface_init(hapd_iface->bss[0])) {
1388                 wpa_printf(MSG_ERROR, "%s: Failed to setup control "
1389                            "interface", __func__);
1390                 goto fail;
1391         }
1392         wpa_printf(MSG_INFO, "Add interface '%s'", conf->bss[0].iface);
1393
1394         return 0;
1395
1396 fail:
1397         if (conf)
1398                 hostapd_config_free(conf);
1399         if (hapd_iface) {
1400                 os_free(hapd_iface->bss[interfaces->count]);
1401                 os_free(hapd_iface);
1402         }
1403         return -1;
1404 }
1405
1406
1407 int hostapd_remove_iface(struct hapd_interfaces *interfaces, char *buf)
1408 {
1409         struct hostapd_iface *hapd_iface;
1410         size_t i, k = 0;
1411
1412         for (i = 0; i < interfaces->count; i++) {
1413                 hapd_iface = interfaces->iface[i];
1414                 if (hapd_iface == NULL)
1415                         return -1;
1416                 if (!os_strcmp(hapd_iface->conf->bss[0].iface, buf)) {
1417                         wpa_printf(MSG_INFO, "Remove interface '%s'", buf);
1418                         hostapd_interface_deinit_free(hapd_iface);
1419                         k = i;
1420                         while (k < (interfaces->count - 1)) {
1421                                 interfaces->iface[k] =
1422                                         interfaces->iface[k + 1];
1423                                 k++;
1424                         }
1425                         interfaces->count--;
1426                         return 0;
1427                 }
1428         }
1429         return -1;
1430 }
1431
1432 #endif /* HOSTAPD */
1433
1434
1435 /**
1436  * hostapd_new_assoc_sta - Notify that a new station associated with the AP
1437  * @hapd: Pointer to BSS data
1438  * @sta: Pointer to the associated STA data
1439  * @reassoc: 1 to indicate this was a re-association; 0 = first association
1440  *
1441  * This function will be called whenever a station associates with the AP. It
1442  * can be called from ieee802_11.c for drivers that export MLME to hostapd and
1443  * from drv_callbacks.c based on driver events for drivers that take care of
1444  * management frames (IEEE 802.11 authentication and association) internally.
1445  */
1446 void hostapd_new_assoc_sta(struct hostapd_data *hapd, struct sta_info *sta,
1447                            int reassoc)
1448 {
1449         if (hapd->tkip_countermeasures) {
1450                 hostapd_drv_sta_deauth(hapd, sta->addr,
1451                                        WLAN_REASON_MICHAEL_MIC_FAILURE);
1452                 return;
1453         }
1454
1455         hostapd_prune_associations(hapd, sta->addr);
1456
1457         /* IEEE 802.11F (IAPP) */
1458         if (hapd->conf->ieee802_11f)
1459                 iapp_new_station(hapd->iapp, sta);
1460
1461 #ifdef CONFIG_P2P
1462         if (sta->p2p_ie == NULL && !sta->no_p2p_set) {
1463                 sta->no_p2p_set = 1;
1464                 hapd->num_sta_no_p2p++;
1465                 if (hapd->num_sta_no_p2p == 1)
1466                         hostapd_p2p_non_p2p_sta_connected(hapd);
1467         }
1468 #endif /* CONFIG_P2P */
1469
1470         /* Start accounting here, if IEEE 802.1X and WPA are not used.
1471          * IEEE 802.1X/WPA code will start accounting after the station has
1472          * been authorized. */
1473         if (!hapd->conf->ieee802_1x && !hapd->conf->wpa) {
1474                 os_get_time(&sta->connected_time);
1475                 accounting_sta_start(hapd, sta);
1476         }
1477
1478         /* Start IEEE 802.1X authentication process for new stations */
1479         ieee802_1x_new_station(hapd, sta);
1480         if (reassoc) {
1481                 if (sta->auth_alg != WLAN_AUTH_FT &&
1482                     !(sta->flags & (WLAN_STA_WPS | WLAN_STA_MAYBE_WPS)))
1483                         wpa_auth_sm_event(sta->wpa_sm, WPA_REAUTH);
1484         } else
1485                 wpa_auth_sta_associated(hapd->wpa_auth, sta->wpa_sm);
1486
1487         wpa_printf(MSG_DEBUG, "%s: reschedule ap_handle_timer timeout "
1488                    "for " MACSTR " (%d seconds - ap_max_inactivity)",
1489                    __func__, MAC2STR(sta->addr),
1490                    hapd->conf->ap_max_inactivity);
1491         eloop_cancel_timeout(ap_handle_timer, hapd, sta);
1492         eloop_register_timeout(hapd->conf->ap_max_inactivity, 0,
1493                                ap_handle_timer, hapd, sta);
1494 }