2 * wpa_supplicant/hostapd control interface library
3 * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
16 /* wpa_supplicant control interface - fixed message prefixes */
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** wpa_supplicant is exiting */
32 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
33 /** Password change was completed successfully */
34 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
35 /** EAP-Request/Notification received */
36 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
37 /** EAP authentication started (EAP-Request/Identity received) */
38 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
39 /** EAP method proposed by the server */
40 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
41 /** EAP method selected */
42 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
43 /** EAP peer certificate from TLS */
44 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
45 /** EAP TLS certificate chain validation error */
46 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
48 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
49 /** EAP authentication completed successfully */
50 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
51 /** EAP authentication failed (EAP-Failure received) */
52 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
53 /** Network block temporarily disabled (e.g., due to authentication failure) */
54 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
55 /** Temporarily disabled network block re-enabled */
56 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
57 /** New scan results available */
58 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
59 /** wpa_supplicant state change */
60 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
61 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
62 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
63 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
64 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
66 /** RSN IBSS 4-way handshakes completed with specified peer */
67 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
69 /** WPS overlap detected in PBC mode */
70 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
71 /** Available WPS AP with active PBC found in scan results */
72 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
73 /** Available WPS AP with our address as authorized in scan results */
74 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
75 /** Available WPS AP with recently selected PIN registrar found in scan results
77 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
78 /** Available WPS AP found in scan results */
79 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
80 /** A new credential received */
81 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
83 #define WPS_EVENT_M2D "WPS-M2D "
84 /** WPS registration failed after M2/M2D */
85 #define WPS_EVENT_FAIL "WPS-FAIL "
86 /** WPS registration completed successfully */
87 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
88 /** WPS enrollment attempt timed out and was terminated */
89 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
90 /* PBC mode was activated */
91 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
92 /* PBC mode was disabled */
93 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
95 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
97 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
100 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
101 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
102 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
103 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
104 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
105 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
107 /** P2P device found */
108 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
110 /** P2P device lost */
111 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
113 /** A P2P device requested GO negotiation, but we were not ready to start the
115 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
116 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
117 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
118 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
119 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
120 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
121 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
122 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
123 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
124 /* parameters: <peer address> <PIN> */
125 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
126 /* parameters: <peer address> */
127 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
128 /* parameters: <peer address> */
129 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
130 /* parameters: <peer address> */
131 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
132 /* parameters: <peer address> <status> */
133 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
134 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
135 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
136 /* parameters: <src addr> <update indicator> <TLVs> */
137 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
138 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
139 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
140 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
141 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
143 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
144 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
146 #define INTERWORKING_AP "INTERWORKING-AP "
147 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
149 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
151 /* hostapd control interface - fixed message prefixes */
152 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
153 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
154 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
155 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
156 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
157 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
158 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
159 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
160 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
162 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
163 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
165 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
166 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
167 #define DFS_EVENT_CAC_START "DFS-CAC-START "
168 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
169 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
171 /* BSS command information masks */
173 #define WPA_BSS_MASK_ALL 0xFFFDFFFF
174 #define WPA_BSS_MASK_ID BIT(0)
175 #define WPA_BSS_MASK_BSSID BIT(1)
176 #define WPA_BSS_MASK_FREQ BIT(2)
177 #define WPA_BSS_MASK_BEACON_INT BIT(3)
178 #define WPA_BSS_MASK_CAPABILITIES BIT(4)
179 #define WPA_BSS_MASK_QUAL BIT(5)
180 #define WPA_BSS_MASK_NOISE BIT(6)
181 #define WPA_BSS_MASK_LEVEL BIT(7)
182 #define WPA_BSS_MASK_TSF BIT(8)
183 #define WPA_BSS_MASK_AGE BIT(9)
184 #define WPA_BSS_MASK_IE BIT(10)
185 #define WPA_BSS_MASK_FLAGS BIT(11)
186 #define WPA_BSS_MASK_SSID BIT(12)
187 #define WPA_BSS_MASK_WPS_SCAN BIT(13)
188 #define WPA_BSS_MASK_P2P_SCAN BIT(14)
189 #define WPA_BSS_MASK_INTERNETW BIT(15)
190 #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
191 #define WPA_BSS_MASK_DELIM BIT(17)
194 /* wpa_supplicant/hostapd control interface access */
197 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
198 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
199 * Returns: Pointer to abstract control interface data or %NULL on failure
201 * This function is used to open a control interface to wpa_supplicant/hostapd.
202 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
203 * is configured in wpa_supplicant/hostapd and other programs using the control
204 * interface need to use matching path configuration.
206 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
210 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
211 * @ctrl: Control interface data from wpa_ctrl_open()
213 * This function is used to close a control interface.
215 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
219 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
220 * @ctrl: Control interface data from wpa_ctrl_open()
221 * @cmd: Command; usually, ASCII text, e.g., "PING"
222 * @cmd_len: Length of the cmd in bytes
223 * @reply: Buffer for the response
224 * @reply_len: Reply buffer length
225 * @msg_cb: Callback function for unsolicited messages or %NULL if not used
226 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
228 * This function is used to send commands to wpa_supplicant/hostapd. Received
229 * response will be written to reply and reply_len is set to the actual length
230 * of the reply. This function will block for up to two seconds while waiting
231 * for the reply. If unsolicited messages are received, the blocking time may
234 * msg_cb can be used to register a callback function that will be called for
235 * unsolicited messages received while waiting for the command response. These
236 * messages may be received if wpa_ctrl_request() is called at the same time as
237 * wpa_supplicant/hostapd is sending such a message. This can happen only if
238 * the program has used wpa_ctrl_attach() to register itself as a monitor for
239 * event messages. Alternatively to msg_cb, programs can register two control
240 * interface connections and use one of them for commands and the other one for
241 * receiving event messages, in other words, call wpa_ctrl_attach() only for
242 * the control interface connection that will be used for event messages.
244 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
245 char *reply, size_t *reply_len,
246 void (*msg_cb)(char *msg, size_t len));
250 * wpa_ctrl_attach - Register as an event monitor for the control interface
251 * @ctrl: Control interface data from wpa_ctrl_open()
252 * Returns: 0 on success, -1 on failure, -2 on timeout
254 * This function registers the control interface connection as a monitor for
255 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
256 * control interface connection starts receiving event messages that can be
257 * read with wpa_ctrl_recv().
259 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
263 * wpa_ctrl_detach - Unregister event monitor from the control interface
264 * @ctrl: Control interface data from wpa_ctrl_open()
265 * Returns: 0 on success, -1 on failure, -2 on timeout
267 * This function unregisters the control interface connection as a monitor for
268 * wpa_supplicant/hostapd events, i.e., cancels the registration done with
271 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
275 * wpa_ctrl_recv - Receive a pending control interface message
276 * @ctrl: Control interface data from wpa_ctrl_open()
277 * @reply: Buffer for the message data
278 * @reply_len: Length of the reply buffer
279 * Returns: 0 on success, -1 on failure
281 * This function will receive a pending control interface message. This
282 * function will block if no messages are available. The received response will
283 * be written to reply and reply_len is set to the actual length of the reply.
284 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
285 * must have been used to register the control interface as an event monitor.
287 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
291 * wpa_ctrl_pending - Check whether there are pending event messages
292 * @ctrl: Control interface data from wpa_ctrl_open()
293 * Returns: 1 if there are pending messages, 0 if no, or -1 on error
295 * This function will check whether there are any pending control interface
296 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
297 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
298 * register the control interface as an event monitor.
300 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
304 * wpa_ctrl_get_fd - Get file descriptor used by the control interface
305 * @ctrl: Control interface data from wpa_ctrl_open()
306 * Returns: File descriptor used for the connection
308 * This function can be used to get the file descriptor that is used for the
309 * control interface connection. The returned value can be used, e.g., with
310 * select() while waiting for multiple events.
312 * The returned file descriptor must not be used directly for sending or
313 * receiving packets; instead, the library functions wpa_ctrl_request() and
314 * wpa_ctrl_recv() must be used for this.
316 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
318 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
322 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
323 * may be left over from clients that were previously connected to
324 * wpa_supplicant. This keeps these files from being orphaned in the
325 * event of crashes that prevented them from being removed as part
326 * of the normal orderly shutdown.
328 void wpa_ctrl_cleanup(void);
331 #ifdef CONFIG_CTRL_IFACE_UDP
332 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
333 #define WPA_CTRL_IFACE_PORT 9877
334 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
335 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
336 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
337 #endif /* CONFIG_CTRL_IFACE_UDP */
344 #endif /* WPA_CTRL_H */