# Master config file, must be in /etc/radsecproxy or specified with -c option # All possible config options are listed below # First you may define any global options, these are: # # You can optionally specify addresses and ports to listen on # Multiple statements can be used for multiple ports/addresses #ListenUDP *:1814 #listenUDP localhost #ListenTCP [2001:700:1:7:215:f2ff:fe35:307d]:1812 #listenTLS 10.10.10.10:2084 #ListenTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084 #ListenDTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084 # To specify a certain address/port for UDP/TLS requests you can use e.g. #SourceUDP 127.0.0.1:33000 #SourceTCP *:33000 #SourceTLS *:33001 #SourceDTLS *:33001 # Optional log level. 3 is default, 1 is less, 5 is more #LogLevel 3 # Optional LogDestination, else stderr used for logging # Logging to file #LogDestination file:///tmp/rp.log # Or logging with Syslog. LOG_DAEMON used if facility not specified # The supported facilities are LOG_DAEMON, LOG_MAIL, LOG_USER and # LOG_LOCAL0, ..., LOG_LOCAL7 #LogDestination x-syslog:/// #LogDestination x-syslog:///log_local2 # For generating log entries conforming to the F-Ticks system, specify # FTicksReporting with one of the following values. # None -- Do not log in F-Ticks format. This is the default. # Basic -- Do log in F-Ticks format but do not log VISINST. # Full -- Do log in F-Ticks format and do log VISINST. # Please note that in order to get F-Ticks logging for a given client, # its matching client configuration block has to contain the # fticksVISCOUNTRY option. # You can optionally specify FTicksMAC in order to determine if and # how Calling-Station-Id is logged. # Static -- Use a static string as a placeholder for # Calling-Station-Id. This is the default. # Original -- Log Calling-Station-Id as-is. # VendorHashed -- Keep first three segments as-is, hash the rest. # VendorKeyHashed -- Like VendorHashed but salt with F-Ticks-Key. # FullyHashed -- Hash the entire string. # FullyKeyHashed -- Like FullyHashed but salt with F-Ticks-Key. # In order to use FTicksMAC with one of VendorKeyHashed or # FullyKeyHashed, specify a key with FTicksKey. # FTicksKey # Default F-Ticks configuration: #FTicksReporting None #FTicksMAC FullyKeyHashed # There is an option for doing some simple loop prevention. Note that # the LoopPrevention directive can be used in server blocks too, # overriding what's set here in the basic settings. #LoopPrevention on # Add TTL attribute with value 20 if not present (prevents endless loops) #addTTL 20 # If we have TLS clients or servers we must define at least one tls block. # You can name them whatever you like and then reference them by name when # specifying clients or servers later. There are however three special names # "default", "defaultclient" and "defaultserver". If no name is defined for # a client, the "defaultclient" block will be used if it exists, if not the # "default" will be used. For a server, "defaultserver" followed by "default" # will be checked. # # The simplest configuration you can do is: tls default { # You must specify at least one of CACertificateFile or CACertificatePath # for TLS to work. We always verify peer certificate (client and server) # CACertificateFile /etc/cacerts/CA.pem CACertificatePath /etc/cacerts # You must specify the below for TLS, we always present our certificate CertificateFile /etc/hostcertkey/host.example.com.pem CertificateKeyFile /etc/hostcertkey/host.example.com.key.pem # Optionally specify password if key is encrypted (not very secure) CertificateKeyPassword "follow the white rabbit" # Optionally enable CRL checking # CRLCheck on # Optionally specify how long CAs and CRLs are cached, default forever # CacheExpiry 3600 # Optionally require that peer certs have one of the specified policyOIDs # policyoid 1.2.3 # this option can be used multiple times # policyoid 1.3.4 } # If you want one cert for all clients and another for all servers, use # defaultclient and defaultserver instead of default. If we wanted some # particular server to use something else you could specify a block # "tls myserver" and then reference that for that server. If you always # name the tls block in the client/server config you don't need a default # Now we configure clients, servers and realms. Note that these and # also the lines above may be in any order, except that a realm # can only be configured to use a server that is previously configured. # A realm can be a literal domain name, * which matches all, or a # regexp. A regexp is specified by the character prefix / # For regexp we do case insensitive matching of the entire username string. # The matching of realms is done in the order they are specified, using the # first match found. Some examples are # "@example\.com$", "\.com$", ".*" and "^[a-z].*@example\.com$". # To treat local users separately you might try first specifying "@" # and after that "*". # Configure a rewrite block if you want to add/remove/modify attributes # rewrite example { # # Remove NAS-Port. # removeAttribute 5 # # Remove vendor attribute 100. # removeVendorAttribute 99:100 # # Called-Station-Id = "123456" # addAttribute 30:123456 # # Vendor-99-Attr-101 = 0x0f # addVendorAttribute 99:101:%0f # # Change users @local to @example.com. # modifyAttribute 1:/^(.*)@local$/\1@example.com/ # } client 2001:db8::1 { type tls secret verysecret # we could specify tls here, e.g. # tls myclient # in order to use tls parameters named myclient. We don't, so we will # use "tls defaultclient" if defined, or look for "tls default" as a # last resort } client 127.0.0.1 { type udp secret secret # Might do rewriting of incoming messages using rewrite block example # rewriteIn example # Can also do rewriting of outgoing messages # rewriteOut example } client 127.0.0.1 { type tcp secret secret } client radius.example.com { type tls # secret is optional for TLS } client radius.example.com { type dtls # secret is optional for DTLS } server 127.0.0.1 { type UDP secret secret # Might do rewriting of incoming messages using rewrite block example # rewriteIn example # Can also do rewriting of outgoing messages # rewriteOut example # Might override loop prevention here too: # LoopPrevention off } realm eduroam.cc { server 127.0.0.1 # If also want to use this server for accounting, specify # accountingServer 127.0.0.1 } server 2001:db8::1 { type TLS port 2283 # secret is optional for TLS # we could specify tls here, e.g. # tls myserver # in order to use tls parameters named myserver. We don't, so we will # use "tls defaultserver" if defined, or look for "tls default" as a # last resort } server radius.example.com { type tls secret verysecret StatusServer on # statusserver is optional, can be on or off. Off is default } #server radius.example.com { # type dtls # secret verysecret # StatusServer on ## statusserver is optional, can be on or off. Off is default #} # Equivalent to example.com realm /@example\.com$ { server 2001:db8::1 } # One can define a realm without servers, the proxy will then reject # and requests matching this. Optionally one can specify ReplyMessage # attribute to be included in the reject message. One can also use # AccountingResponse option to specify that the proxy should send such. realm /\.com$ { } realm /^anonymous$ { replymessage "No Access" # AccountingResponse On } # The realm below is equivalent to /.* realm * { server radius.example.com } # If you don't have a default server you probably want to # reject all unknowns. Optionally you can also include a message #realm * { # replymessage "User unknown" #}