-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure config.guess config.sub depcomp \
- install-sh ltmain.sh missing
+ $(srcdir)/mech_eap.spec.in $(top_srcdir)/configure \
+ build-aux/compile build-aux/config.guess build-aux/config.sub \
+ build-aux/depcomp build-aux/install-sh build-aux/ltmain.sh \
+ build-aux/missing config.guess config.sub install-sh
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/minuso.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = mech_eap.spec
CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo " GEN " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
+AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
JANSSON_LDFLAGS = @JANSSON_LDFLAGS@
JANSSON_LIBS = @JANSSON_LIBS@
KRB5_CFLAGS = @KRB5_CFLAGS@
+KRB5_LDFLAGS = @KRB5_LDFLAGS@
KRB5_LIBS = @KRB5_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
+LIBMOONSHOT_CFLAGS = @LIBMOONSHOT_CFLAGS@
+LIBMOONSHOT_LDFLAGS = @LIBMOONSHOT_LDFLAGS@
+LIBMOONSHOT_LIBS = @LIBMOONSHOT_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OPENSAML_CXXFLAGS = @OPENSAML_CXXFLAGS@
+OPENSAML_LDFLAGS = @OPENSAML_LDFLAGS@
+OPENSAML_LIBS = @OPENSAML_LIBS@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
SUBDIRS = libeap mech_eap
+EXTRA_DIST = mech_eap.spec
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-am--refresh:
+am--refresh: Makefile
@:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
-$(top_srcdir)/configure: $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
- else :; fi
+ @if test ! -f $@; then rm -f stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
+mech_eap.spec: $(top_builddir)/config.status $(srcdir)/mech_eap.spec.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
$(am__remove_distdir)
dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__remove_distdir)
dist-lzma: distdir
$(am__remove_distdir)
dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
- distcheck distclean distclean-generic distclean-hdr \
+ dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-generic distclean-hdr \
distclean-libtool distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
projects / mech_eap.git / blobdiff