ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
+ --disable-ltdl-install do not install libltdl"
+ac_help="$ac_help
+ --with-ltdl-lib=DIR libltdl library is in DIR [default=${top_builddir}/libltdl/]"
+ac_help="$ac_help
+ --with-ltdl-include=DIR libltdl include files are in DIR [default=$top_srcdir/libltdl/]"
+ac_help="$ac_help
+ --with-system-libtool try to use libtool installed in your system [default=use our own]"
+ac_help="$ac_help
--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
--enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+
+# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
+ PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+
+EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+ echo_test_string="`eval $cmd`" &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ echo='printf %s\n'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
+ fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
- --enable-strict-dependencies Fail configure on lack of module dependancy."
-ac_help="$ac_help
- --with-FOO-include-dir=DIR Dir for includes for FOO, module dependancy."
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
- --with-FOO-lib-dir=DIR Dir for libraries for FOO, module dependancy."
+ --enable-strict-dependencies Fail configure on lack of module dependancy."
ac_help="$ac_help
--with-logdir=DIR Directory for logfiles [LOCALSTATEDIR/log/radius] "
ac_help="$ac_help
ac_help="$ac_help
--with-raddbdir=DIR Directory for config files [SYSCONFDIR/raddb] "
ac_help="$ac_help
- --with-dict-nocase Make dictionary case-independant (default=yes)"
-ac_help="$ac_help
--with-ascend-binary Include support for Ascend binary filter attributes (default=yes)"
ac_help="$ac_help
--with-threads Use threads, if available. (default=yes) "
ac_help="$ac_help
- --with-thread-pool Use a pool of threads for high-load systems. (default=no) "
-ac_help="$ac_help
--with-snmp Compile in SNMP support. (default=yes)"
ac_help="$ac_help
- --disable-ltdl-install do not install libltdl"
+ --with-large-files Compile in large (2G+) file support. (default=no)"
ac_help="$ac_help
--with-static-modules=QUOTED-MODULE-LIST"
ac_help="$ac_help
- --enable-developer Turns on flags of interest to developers."
+ --enable-developer Enables features of interest to developers."
+ac_help="$ac_help
+ --with-experimental-modules Use experimental and unstable modules. (default=no) "
+ac_help="$ac_help
+ --with-openssl-includes=DIR Directory to look for OpenSSL include files"
+ac_help="$ac_help
+ --with-openssl-libraries=DIR Directory to look for OpenSSL library files"
+ac_help="$ac_help
+ --with-rlm-FOO-lib-dir=DIR Directory to look for library files used by module FOO"
+ac_help="$ac_help
+ --with-rlm-FOO-include-dir=DIR Directory to look for include files used by module FOO"
+ac_help="$ac_help
+ --with-udpfromto Compile in UDPFROMTO support. (default=no)"
# Initialize some variables set by options.
# The variables have the same names as the options, with
-# From configure.in Revision: 1.115
-RADIUSD_VERSION=0.1
+# From configure.in Revision: 1.199
+RADIUSD_MAJOR_VERSION=1
+RADIUSD_MINOR_VERSION=1.0-pre0
+RADIUSD_VERSION="${RADIUSD_MAJOR_VERSION}.${RADIUSD_MINOR_VERSION}"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:571: checking for $ac_word" >&5
+echo "configure:746: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:601: checking for $ac_word" >&5
+echo "configure:776: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:652: checking for $ac_word" >&5
+echo "configure:827: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:684: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:859: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 695 "configure"
+#line 870 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:726: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:901: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:731: checking whether we are using GNU C" >&5
+echo "configure:906: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:915: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:759: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:934: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:791: checking how to run the C preprocessor" >&5
+echo "configure:966: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 806 "configure"
+#line 981 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:812: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 823 "configure"
+#line 998 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1004: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 840 "configure"
+#line 1015 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
-echo "configure:872: checking whether ${CC-cc} needs -traditional" >&5
+echo "configure:1047: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
-#line 878 "configure"
+#line 1053 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
-#line 896 "configure"
+#line 1071 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
fi
echo $ac_n "checking whether we are using SUNPro C""... $ac_c" 1>&6
-echo "configure:918: checking whether we are using SUNPro C" >&5
+echo "configure:1093: checking whether we are using SUNPro C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_suncc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_suncc=yes
else
ac_cv_prog_suncc=no
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:938: checking for $ac_word" >&5
+echo "configure:1113: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+abs_top_builddir=`pwd`
+
+
+
PACKAGE=freeradius
+echo $ac_n "checking for AIX""... $ac_c" 1>&6
+echo "configure:1148: checking for AIX" >&5
+cat > conftest.$ac_ext <<EOF
+#line 1150 "configure"
+#include "confdefs.h"
+#ifdef _AIX
+ yes
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
+#define _ALL_SOURCE 1
+EOF
+
+else
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+
+
# Extract the first word of "gmake", so it can be a program name with args.
set dummy gmake; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:971: checking for $ac_word" >&5
+echo "configure:1175: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GMAKE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "make", so it can be a program name with args.
set dummy make; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1002: checking for $ac_word" >&5
+echo "configure:1206: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmake", so it can be a program name with args.
set dummy gmake; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1039: checking for $ac_word" >&5
+echo "configure:1243: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
from ftp://prep.ai.mit.edu/pub/gnu/make/ before continuing." 1>&2; exit 1; }
fi
- echo $ac_n "checking for main in -lltdl""... $ac_c" 1>&6
-echo "configure:1080: checking for main in -lltdl" >&5
-ac_lib_var=`echo ltdl'_'main | sed 'y%./+-%__p_%'`
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+ # Check whether --enable-ltdl-install or --disable-ltdl-install was given.
+if test "${enable_ltdl_install+set}" = set; then
+ enableval="$enable_ltdl_install"
+ :
+fi
+
+ if test x"${enable_ltdl_install+set}" != xset; then
+ enable_ltdl_install=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ fi
+ # Check whether --with-ltdl-lib or --without-ltdl-lib was given.
+if test "${with_ltdl_lib+set}" = set; then
+ withval="$with_ltdl_lib"
+ if test x"withval" = x"yes" || test x"withval" = x"no" ; then
+ echo "configure: warning: specify location of libltdl library" 1>&2
+ withval=
+ fi
+
+fi
+
+
+ save_LDFLAGS="$LDFLAGS"
+ test -z "$withval" || LDFLAGS="$LDFLAGS -L$withval"
+ echo $ac_n "checking for lt_dlinit in -lltdl""... $ac_c" 1>&6
+echo "configure:1326: checking for lt_dlinit in -lltdl" >&5
+ac_lib_var=`echo ltdl'_'lt_dlinit | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lltdl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1088 "configure"
+#line 1334 "configure"
#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char lt_dlinit();
int main() {
-main()
+lt_dlinit()
; return 0; }
EOF
-if { (eval echo configure:1095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no
+
+ ltdl_found="yes"
+ LIBLTDL="-lltdl"
+ # Check whether --with-ltdl-include or --without-ltdl-include was given.
+if test "${with_ltdl_include+set}" = set; then
+ withval="$with_ltdl_include"
+ if test x"withval" = x"yes" || test x"withval" = x"no" ; then
+ echo "configure: warning: specify location of ltdl.h" 1>&2
+ withval=
+ fi
+ save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I$withval"
+ ac_safe=`echo "ltdl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for ltdl.h""... $ac_c" 1>&6
+echo "configure:1374: checking for ltdl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1379 "configure"
+#include "confdefs.h"
+#include <ltdl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1384: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+
+ INCLTDL="-I$withval"
+ LIBLTDLPATH=
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+
+fi
+
+
else
echo "$ac_t""no" 1>&6
-if test x"$enable_ltdl_install" = xno; then
+fi
+
+ LDFLAGS="$save_LDFLAGS"
+
+ if test x"$enable_ltdl_install" = xno && test x"$ltdl_found" != xyes; then
echo "configure: warning: libltdl not installed, but installation disabled" 1>&2
- else
- enable_ltdl_install=yes
fi
-
+ if test x"$ltdl_found" = xyes; then
+ enable_ltdl_install="no"
+ fi
+
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/''libltdl'/libltdl.la
+ INCLTDL='-I${top_srcdir}/''libltdl'
+ subdirs="'libltdl'"
+
+ LIBLTDLPATH=libltdl
+ fi
+
+
+
+# Find the correct PATH separator. Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+ UNAME=${UNAME-`uname 2>/dev/null`}
+ case X$UNAME in
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
+ PATH_SEPARATOR=$lt_cv_sys_path_separator
fi
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/libltdl'/libltdl.la
- INCLTDL='-I${top_builddir}/libltdl'
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:1450: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1455 "configure"
+#include "confdefs.h"
+int main() {
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:1466: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:1483: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1488 "configure"
+#include "confdefs.h"
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:1495: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1229: checking host system type" >&5
+echo "configure:1587: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1250: checking build system type" >&5
+echo "configure:1608: checking build system type" >&5
build_alias=$build
case "$build_alias" in
fi
ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
+if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1279: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
+echo "configure:1637: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1303: checking for GNU ld" >&5
+echo "configure:1667: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1306: checking for non-GNU ld" >&5
+echo "configure:1670: checking for non-GNU ld" >&5
fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
done
IFS="$ac_save_ifs"
else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
-LD="$ac_cv_path_LD"
+LD="$lt_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1341: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+echo "configure:1705: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
+ lt_cv_prog_gnu_ld=yes
else
- ac_cv_prog_gnu_ld=no
+ lt_cv_prog_gnu_ld=no
fi
fi
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1722: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1357: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+echo "configure:1734: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
- ac_cv_path_NM="$NM"
+ lt_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
break
else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
-NM="$ac_cv_path_NM"
+NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1393: checking whether ln -s works" >&5
+echo "configure:1772: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1793: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-libtool_flags="$libtool_flags --enable-dlopen"
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- :
-fi
+cygwin* | mingw* | pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.[012])
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 1442 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1443: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
+freebsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
+ else
+ lt_cv_deplibs_check_method=pass_all
fi
- rm -rf conftest*
;;
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1464: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1469 "configure"
-#include "confdefs.h"
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-int main() {
+hpux10.20*|hpux11*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+openbsd*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+ else
+ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1976: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:2002: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:2012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.$ac_ext | *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
+echo "configure:2043: checking command to parse $NM output" >&5
+if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*) # Its linker distinguishes data from code symbols
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ ;;
+irix*)
+ symcode='[BCDEGRST]'
+ ;;
+solaris* | sysv5*)
+ symcode='[BDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $host_os in
+mingw*)
+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+ symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Write the raw and C identifiers.
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+ rm -f conftest*
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+ if { (eval echo configure:2123: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { (eval echo configure:2126: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+ if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+ cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+ sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+ {0, (lt_ptr) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+ if { (eval echo configure:2177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ pipe_works=yes
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ global_symbol_to_cdecl=
+ global_symbol_to_c_name_address=
+else
+ global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+ global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+fi
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
+ echo "$ac_t""failed" 1>&6
+else
+ echo "$ac_t""ok" 1>&6
+fi
+
+for ac_hdr in dlfcn.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2226: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2231 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2236: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+
+
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:2271: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:2333: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2404: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2436: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2471: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2503: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ STRIP=":"
+fi
+fi
+
+
+enable_dlopen=yes
+enable_win32_dll=no
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 2552 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2574: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2587 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+need_locks="$enable_libtool_lock"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+if test x"$host" != x"$build"; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case $host_os in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+ ;;
+ *)
+ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+## FIXME: this should be a separate macro
+##
+echo $ac_n "checking for objdir""... $ac_c" 1>&6
+echo "configure:2716: checking for objdir" >&5
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t""$objdir" 1>&6
+##
+## END FIXME
+
+
+## FIXME: this should be a separate macro
+##
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test -z "$pic_mode" && pic_mode=default
+
+# We assume here that the value for lt_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
+echo "configure:2747: checking for $compiler option to produce PIC" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_prog_cc_pic=
+ lt_cv_prog_cc_shlib=
+ lt_cv_prog_cc_wl=
+ lt_cv_prog_cc_static=
+ lt_cv_prog_cc_no_builtin=
+ lt_cv_prog_cc_can_build_shared=$can_build_shared
+
+ if test "$GCC" = yes; then
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-static'
+
+ case $host_os in
+ aix*)
+ # Below there is a dirty hack to force normal static linking with -ldl
+ # The problem is because libdl dynamically linked with both libc and
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+ # not sure about C++ programs.
+ lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+ ;;
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_cv_prog_cc_pic='-fno-common'
+ ;;
+ cygwin* | mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_cv_prog_cc_pic=-Kconform_pic
+ fi
+ ;;
+ *)
+ lt_cv_prog_cc_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for PIC flags for the system compiler.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ lt_cv_prog_cc_wl='-Wl,'
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_cv_prog_cc_static='-Bstatic'
+ else
+ lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
+ lt_cv_prog_cc_pic='+Z'
+ ;;
+
+ irix5* | irix6*)
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-non_shared'
+ # PIC (with -KPIC) is the default.
+ ;;
+
+ cygwin* | mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_cv_prog_cc_pic='-DDLL_EXPORT'
+ ;;
+
+ newsos6)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ # All OSF/1 code is PIC.
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-non_shared'
+ ;;
+
+ sco3.2v5*)
+ lt_cv_prog_cc_pic='-Kpic'
+ lt_cv_prog_cc_static='-dn'
+ lt_cv_prog_cc_shlib='-belf'
+ ;;
+
+ solaris*)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ lt_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ sunos4*)
+ lt_cv_prog_cc_pic='-PIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ lt_cv_prog_cc_wl='-Qoption ld '
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+ if test "x$host_vendor" = xsni; then
+ lt_cv_prog_cc_wl='-LD'
+ else
+ lt_cv_prog_cc_wl='-Wl,'
+ fi
+ ;;
+
+ uts4*)
+ lt_cv_prog_cc_pic='-pic'
+ lt_cv_prog_cc_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_cv_prog_cc_pic='-Kconform_pic'
+ lt_cv_prog_cc_static='-Bstatic'
+ fi
+ ;;
+
+ *)
+ lt_cv_prog_cc_can_build_shared=no
+ ;;
+ esac
+ fi
+
+fi
+
+if test -z "$lt_cv_prog_cc_pic"; then
+ echo "$ac_t""none" 1>&6
+else
+ echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
+
+ # Check to make sure the pic_flag actually works.
+ echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
+echo "configure:2899: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+ if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+ cat > conftest.$ac_ext <<EOF
+#line 2906 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2913: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ case $host_os in
+ hpux9* | hpux10* | hpux11*)
+ # On HP-UX, both CC and GCC only warn that PIC is supported... then
+ # they create non-PIC objects. So, if there were any warnings, we
+ # assume that PIC is not supported.
+ if test -s conftest.err; then
+ lt_cv_prog_cc_pic_works=no
+ else
+ lt_cv_prog_cc_pic_works=yes
+ fi
+ ;;
+ *)
+ lt_cv_prog_cc_pic_works=yes
+ ;;
+ esac
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_prog_cc_pic_works=no
+
+fi
+rm -f conftest*
+ CFLAGS="$save_CFLAGS"
+
+fi
+
+
+ if test "X$lt_cv_prog_cc_pic_works" = Xno; then
+ lt_cv_prog_cc_pic=
+ lt_cv_prog_cc_can_build_shared=no
+ else
+ lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+ fi
+
+ echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
+fi
+##
+## END FIXME
+
+# Check for any special shared library compilation flags.
+if test -n "$lt_cv_prog_cc_shlib"; then
+ echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
+ if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
+ else
+ echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
+ lt_cv_prog_cc_can_build_shared=no
+ fi
+fi
+
+## FIXME: this should be a separate macro
+##
+echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
+echo "configure:2969: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_prog_cc_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+ cat > conftest.$ac_ext <<EOF
+#line 2977 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_prog_cc_static_works=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+
+
+# Belt *and* braces to stop my trousers falling down:
+test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
+
+pic_flag="$lt_cv_prog_cc_pic"
+special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+wl="$lt_cv_prog_cc_wl"
+link_static_flag="$lt_cv_prog_cc_static"
+no_builtin_flag="$lt_cv_prog_cc_no_builtin"
+can_build_shared="$lt_cv_prog_cc_can_build_shared"
+##
+## END FIXME
+
+
+## FIXME: this should be a separate macro
+##
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
+echo "configure:3015: checking if $compiler supports -c -o file.$ac_objext" >&5
+if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+echo "int some_variable = 0;" > conftest.$ac_ext
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory. Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+compiler_c_o=no
+if { (eval echo configure:3034: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+ lt_cv_compiler_c_o=no
+ else
+ lt_cv_compiler_c_o=yes
+ fi
+else
+ # Append any errors to the config.log.
+ cat out/conftest.err 1>&5
+ lt_cv_compiler_c_o=no
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+fi
+
+compiler_c_o=$lt_cv_compiler_c_o
+echo "$ac_t""$compiler_c_o" 1>&6
+
+if test x"$compiler_c_o" = x"yes"; then
+ # Check to see if we can write to a .lo
+ echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
+echo "configure:3063: checking if $compiler supports -c -o file.lo" >&5
+ if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ lt_cv_compiler_o_lo=no
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
+ save_objext="$ac_objext"
+ ac_objext=lo
+ cat > conftest.$ac_ext <<EOF
+#line 3074 "configure"
+#include "confdefs.h"
+
+int main() {
+int some_variable = 0;
+; return 0; }
+EOF
+if { (eval echo configure:3081: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ lt_cv_compiler_o_lo=no
+ else
+ lt_cv_compiler_o_lo=yes
+ fi
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ ac_objext="$save_objext"
+ CFLAGS="$save_CFLAGS"
+
+fi
+
+ compiler_o_lo=$lt_cv_compiler_o_lo
+ echo "$ac_t""$compiler_o_lo" 1>&6
+else
+ compiler_o_lo=no
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
+echo "configure:3116: checking if we can lock with hard links" >&5
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ echo "$ac_t""$hard_links" 1>&6
+ if test "$hard_links" = no; then
+ echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+if test "$GCC" = yes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+ echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
+echo "configure:3139: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+ compiler_rtti_exceptions=no
+ cat > conftest.$ac_ext <<EOF
+#line 3145 "configure"
+#include "confdefs.h"
+
+int main() {
+int some_variable = 0;
+; return 0; }
+EOF
+if { (eval echo configure:3152: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ compiler_rtti_exceptions=no
+ else
+ compiler_rtti_exceptions=yes
+ fi
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ CFLAGS="$save_CFLAGS"
+ echo "$ac_t""$compiler_rtti_exceptions" 1>&6
+
+ if test "$compiler_rtti_exceptions" = "yes"; then
+ no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+ else
+ no_builtin_flag=' -fno-builtin'
+ fi
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
+echo "configure:3183: checking whether the linker ($LD) supports shared libraries" >&5
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced. Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+case $host_os in
+cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ # On AIX, the GNU linker is very broken
+ # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+
+ extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
+ test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+ else $CC -o impgen impgen.c ; fi)~
+ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+ old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+ # cygwin and mingw dlls have different entry points and sets of symbols
+ # to exclude.
+ # FIXME: what about values for MSVC?
+ dll_entry=__cygwin_dll_entry@12
+ dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+ case $host_os in
+ mingw*)
+ # mingw values
+ dll_entry=_DllMainCRTStartup@12
+ dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+ ;;
+ esac
+
+ # mingw and cygwin differ, and it's simplest to just exclude the union
+ # of the two symbol sets.
+ dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+ # recent cygwin and mingw systems supply a stub DllMain which the user
+ # can override, but on older systems we have to supply one (in ltdll.c)
+ if test "x$lt_cv_need_dllmain" = "xyes"; then
+ ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+ else
+ ltdll_obj=
+ ltdll_cmds=
+ fi
+
+ # Extract the symbol export list from an `--export-all' def file,
+ # then regenerate the def file from the symbol export list, so that
+ # the compiled dll only exports the symbol export list.
+ # Be careful not to strip the DATA tag left be newer dlltools.
+ export_symbols_cmds="$ltdll_cmds"'
+ $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is.
+ # If DATA tags from a recent dlltool are present, honour them!
+ archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname-def;
+ else
+ echo EXPORTS > $output_objdir/$soname-def;
+ _lt_hint=1;
+ cat $export_symbols | while read symbol; do
+ set dummy \$symbol;
+ case \$# in
+ 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
+ esac;
+ _lt_hint=`expr 1 + \$_lt_hint`;
+ done;
+ fi~
+ '"$ltdll_cmds"'
+ $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = yes; then
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # dlltool doesn't understand --whole-archive et. al.
+ whole_archive_flag_spec=
+ ;;
+ *)
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ ;;
+ esac
+ fi
+else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$link_static_flag"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ hardcode_direct=yes
+ archive_cmds=''
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+
+ shared_flag='-shared'
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ shared_flag='${wl}-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall can do strange things, so it is better to
+ # generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='${wl}-berok'
+ # This is a bit strange, but is similar to how AIX traditionally builds
+ # it's shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ ;;
+
+ darwin* | rhapsody*)
+ case "$host_os" in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag='-undefined suppress'
+ ;;
+ *) # Darwin 1.3 on
+ allow_undefined_flag='-flat_namespace -undefined suppress'
+ ;;
+ esac
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes.
+ archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring'
+ # We need to add '_' to the symbols in $export_symbols first
+ #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ whole_archive_flag_spec='-all_load $convenience'
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ case $host_os in
+ hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+ *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+ esac
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ irix5* | irix6*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ openbsd*)
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+ #Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+
+ sco3.2v5*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ ;;
+
+ solaris*)
+ # gcc --version < 3.0 without binutils cannot create self contained
+ # shared libraries reliably, requiring libgcc.a to resolve some of
+ # the object symbols generated in some cases. Libraries that use
+ # assert need libgcc.a to resolve __eprintf, for example. Linking
+ # a copy of libgcc.a into every shared library to guarantee resolving
+ # such symbols causes other problems: According to Tim Van Holder
+ # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+ # (to the application) exception stack for one thing.
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ case `$CC --version 2>/dev/null` in
+ [12].*)
+ cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries. However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
+*** upgrade to a newer version of GCC. Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+ no_undefined_flag=
+ ;;
+ esac
+ fi
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ if test "x$host_vendor" = xsno; then
+ archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ else
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ fi
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv5*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ hardcode_libdir_flag_spec=
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4.2uw2*)
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=no
+ hardcode_runpath_var=yes
+ runpath_var=LD_RUN_PATH
+ ;;
+
+ sysv5uw7* | unixware7*)
+ no_undefined_flag='${wl}-z ${wl}text'
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+echo "$ac_t""$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
+echo "configure:3871: checking how to hardcode library paths into programs" >&5
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var"; then
+
+ # We can hardcode non-existant directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$hardcode_shlibpath_var" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+echo "$ac_t""$hardcode_action" 1>&6
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+striplib=
+old_striplib=
+echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
+echo "configure:3903: checking whether stripping libraries is possible" >&5
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+##
+## END FIXME
+
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+## FIXME: this should be a separate macro
+##
+# PORTME Fill in your ld.so characteristics
+echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
+echo "configure:3921: checking dynamic linker characteristics" >&5
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}.so$major'
+ ;;
+
+aix4* | aix5*)
+ version_type=linux
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can
+ # not hardcode correct soname into executable. Probably we can
+ # add versioning support to collect2, so additional links can
+ # be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}.so$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+ ;;
+
+beos*)
+ library_names_spec='${libname}.so'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi4*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ export_dynamic_flag_spec=-rdynamic
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ need_version=no
+ need_lib_prefix=no
+ case $GCC,$host_os in
+ yes,cygwin*)
+ library_names_spec='$libname.dll.a'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+ postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog .libs/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $rm \$dlpath'
+ ;;
+ yes,mingw*)
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
+ ;;
+ yes,pw32*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
+ ;;
+ *)
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+ # yet detect zsh echo's removal of \ escapes.
+ library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
+ soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ *)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ dynamic_linker="$host_os dld.sl"
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+ soname_spec='${libname}${release}.sl$major'
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+irix5* | irix6*)
+ version_type=irix
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+ case $host_os in
+ irix5*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+ soname_spec='${libname}${release}.so$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+openbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case "$host_os" in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+os2*)
+ libname_spec='$name'
+ need_lib_prefix=no
+ library_names_spec='$libname.dll $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_version=no
+ soname_spec='${libname}${release}.so'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+sco3.2v5*)
+ version_type=osf
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+ soname_spec='$libname.so.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+echo "$ac_t""$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Report the final consequences.
+echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
+echo "configure:4322: checking if libtool supports shared libraries" >&5
+echo "$ac_t""$can_build_shared" 1>&6
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6
+echo "configure:4330: checking whether to build shared libraries" >&5
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+aix4*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+esac
+echo "$ac_t""$enable_shared" 1>&6
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6
+echo "configure:4357: checking whether to build static libraries" >&5
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$ac_t""$enable_static" 1>&6
+##
+## END FIXME
+
+if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ *)
+ echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "configure:4400: checking for shl_load" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4405 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shl_load(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4428: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_shl_load=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_shl_load=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="shl_load"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "configure:4446: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4454 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo configure:4465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "configure:4484: checking for dlopen" >&5
+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4489 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char dlopen(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_dlopen=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_dlopen=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "configure:4530: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4538 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:4549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
+echo "configure:4568: checking for dlopen in -lsvld" >&5
+ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsvld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4576 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:4587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "configure:4606: checking for dld_link in -ldld" >&5
+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4614 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dld_link();
+int main() {
+dld_link()
; return 0; }
EOF
-if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- lt_cv_cc_needs_belf=yes
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- lt_cv_cc_needs_belf=no
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+else
+ echo "$ac_t""no" 1>&6
fi
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
fi
- ;;
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-esac
+ save_LDFLAGS="$LDFLAGS"
+ eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
+ echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "configure:4681: checking whether a program can dlopen itself" >&5
+if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+#line 4691 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+
+ exit (status);
+}
+EOF
+ if { (eval echo configure:4752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ LDFLAGS="$LDFLAGS $link_static_flag"
+ echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "configure:4775: checking whether a statically linked program can dlopen itself" >&5
+if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+#line 4785 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+
+ exit (status);
+}
+EOF
+ if { (eval echo configure:4846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+## FIXME: this should be a separate macro
+##
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
+echo "configure:4897: checking whether -lc should be explicitly linked in" >&5
+ if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ $rm conftest*
+ echo 'static int dummy;' > conftest.$ac_ext
+
+ if { (eval echo configure:4904: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_cv_prog_cc_wl
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { (eval echo configure:4917: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+fi
+
+ echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
+ ;;
+ esac
+fi
+need_lc=${lt_cv_archive_cmds_need_lc-yes}
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# The second clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+ :
+else
+ # If there is no Makefile yet, we rely on a make rule to execute
+ # `config.status --recheck' to rerun these tests and create the
+ # libtool script then.
+ test -f Makefile && make "$ltmain"
+fi
+
+if test -f "$ltmain"; then
+ trap "$rm \"${ofile}T\"; exit 1" 1 2 15
+ $rm -f "${ofile}T"
+
+ echo creating $ofile
+
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+ for var in echo old_CC old_CFLAGS \
+ AR AR_FLAGS CC LD LN_S NM SHELL \
+ reload_flag reload_cmds wl \
+ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+ thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+ library_names_spec soname_spec \
+ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+ old_striplib striplib file_magic_cmd export_symbols_cmds \
+ deplibs_check_method allow_undefined_flag no_undefined_flag \
+ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+ global_symbol_to_c_name_address \
+ hardcode_libdir_flag_spec hardcode_libdir_separator \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+ case $var in
+ reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+ old_postinstall_cmds | old_postuninstall_cmds | \
+ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+ postinstall_cmds | postuninstall_cmds | \
+ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+ # Double-quote double-evaled strings.
+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+ ;;
+ *)
+ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+ ;;
+ esac
+ done
+
+ cat <<__EOF__ > "${ofile}T"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# The default C compiler.
+CC=$lt_CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_pic_flag
+pic_mode=$pic_mode
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$lt_compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+ case $host_os in
+ aix3*)
+ cat <<\EOF >> "${ofile}T"
+
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+EOF
+ ;;
+ esac
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2*)
+ cat <<'EOF' >> "${ofile}T"
+ # This is a source program that is used to create dlls on Windows
+ # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# # ifdef __CYGWIN32__
+# # define __CYGWIN__ __CYGWIN32__
+# # endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+# __hDllInstance_base = hInst;
+# return TRUE;
+# }
+# /* ltdll.c ends here */
+ # This is a source program that is used to create import libraries
+ # on Windows for dlls which lack them. Don't remove nor modify the
+ # starting and closing comments
+# /* impgen.c starts here */
+# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+# This file is part of GNU libtool.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# */
+#
+# #include <stdio.h> /* for printf() */
+# #include <unistd.h> /* for open(), lseek(), read() */
+# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
+# #include <string.h> /* for strdup() */
+#
+# /* O_BINARY isn't required (or even defined sometimes) under Unix */
+# #ifndef O_BINARY
+# #define O_BINARY 0
+# #endif
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[2];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 2);
+# return b[0] + (b[1]<<8);
+# }
#
+# static unsigned int
+# pe_get32 (fd, offset)
+# int fd;
+# int offset;
+# {
+# unsigned char b[4];
+# lseek (fd, offset, SEEK_SET);
+# read (fd, b, 4);
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+# void *ptr;
+# {
+# unsigned char *b = ptr;
+# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+# int argc;
+# char *argv[];
+# {
+# int dll;
+# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+# unsigned long export_rva, export_size, nsections, secptr, expptr;
+# unsigned long name_rvas, nexp;
+# unsigned char *expdata, *erva;
+# char *filename, *dll_name;
+#
+# filename = argv[1];
+#
+# dll = open(filename, O_RDONLY|O_BINARY);
+# if (dll < 1)
+# return 1;
+#
+# dll_name = filename;
+#
+# for (i=0; filename[i]; i++)
+# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
+# dll_name = filename + i +1;
+#
+# pe_header_offset = pe_get32 (dll, 0x3c);
+# opthdr_ofs = pe_header_offset + 4 + 20;
+# num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+# if (num_entries < 1) /* no exports */
+# return 1;
+#
+# export_rva = pe_get32 (dll, opthdr_ofs + 96);
+# export_size = pe_get32 (dll, opthdr_ofs + 100);
+# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+# secptr = (pe_header_offset + 4 + 20 +
+# pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+# expptr = 0;
+# for (i = 0; i < nsections; i++)
+# {
+# char sname[8];
+# unsigned long secptr1 = secptr + 40 * i;
+# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# lseek(dll, secptr1, SEEK_SET);
+# read(dll, sname, 8);
+# if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# {
+# expptr = fptr + (export_rva - vaddr);
+# if (export_rva + export_size > vaddr + vsize)
+# export_size = vsize - (export_rva - vaddr);
+# break;
+# }
+# }
+#
+# expdata = (unsigned char*)malloc(export_size);
+# lseek (dll, expptr, SEEK_SET);
+# read (dll, expdata, export_size);
+# erva = expdata - export_rva;
+#
+# nexp = pe_as32 (expdata+24);
+# name_rvas = pe_as32 (expdata+32);
+#
+# printf ("EXPORTS\n");
+# for (i = 0; i<nexp; i++)
+# {
+# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+# }
+#
+# return 0;
+# }
+# /* impgen.c ends here */
+
EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
+ esac
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+
+ mv -f "${ofile}T" "$ofile" || \
+ (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+ chmod +x "$ofile"
fi
-rm -f confcache
+##
+## END FIXME
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
+
+# Check whether --with-system-libtool or --without-system-libtool was given.
+if test "${with_system_libtool+set}" = set; then
+ withval="$with_system_libtool"
+ # Extract the first word of "libtool", so it can be a program name with args.
+set dummy libtool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5500: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LIBTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "creating cache $cache_file"
- > $cache_file
+ case "$LIBTOOL" in
+ /*)
+ ac_cv_path_LIBTOOL="$LIBTOOL" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LIBTOOL="$LIBTOOL" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH:/usr/local/bin"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_LIBTOOL="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
fi
+LIBTOOL="$ac_cv_path_LIBTOOL"
+if test -n "$LIBTOOL"; then
+ echo "$ac_t""$LIBTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+
+ LIBTOOL="`pwd`/libtool"
+
+
-
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
+# Prevent multiple expansion
-# Check whether --enable-strict-dependencies or --disable-strict-dependencies was given.
-if test "${enable_strict_dependencies+set}" = set; then
- enableval="$enable_strict_dependencies"
- :
fi
-# Check whether --with-fooincludedir or --without-fooincludedir was given.
-if test "${with_fooincludedir+set}" = set; then
- withval="$with_fooincludedir"
- :
-fi
-# Check whether --with-foolibdir or --without-foolibdir was given.
-if test "${with_foolibdir+set}" = set; then
- withval="$with_foolibdir"
+# Check whether --enable-strict-dependencies or --disable-strict-dependencies was given.
+if test "${enable_strict_dependencies+set}" = set; then
+ enableval="$enable_strict_dependencies"
:
fi
logdir='${localstatedir}/log/radius'
echo $ac_n "checking logdir""... $ac_c" 1>&6
-echo "configure:1602: checking logdir" >&5
+echo "configure:5560: checking logdir" >&5
# Check whether --with-logdir or --without-logdir was given.
if test "${with_logdir+set}" = set; then
withval="$with_logdir"
radacctdir='${logdir}/radacct'
echo $ac_n "checking radacctdir""... $ac_c" 1>&6
-echo "configure:1624: checking radacctdir" >&5
+echo "configure:5582: checking radacctdir" >&5
# Check whether --with-radacctdir or --without-radacctdir was given.
if test "${with_radacctdir+set}" = set; then
withval="$with_radacctdir"
raddbdir='${sysconfdir}/raddb'
echo $ac_n "checking raddbdir""... $ac_c" 1>&6
-echo "configure:1646: checking raddbdir" >&5
+echo "configure:5604: checking raddbdir" >&5
# Check whether --with-raddbdir or --without-raddbdir was given.
if test "${with_raddbdir+set}" = set; then
withval="$with_raddbdir"
echo "$ac_t""$raddbdir" 1>&6
-WITH_DICT_NOCASE=yes
-# Check whether --with-dict-nocase or --without-dict-nocase was given.
-if test "${with_dict_nocase+set}" = set; then
- withval="$with_dict_nocase"
- case "$withval" in
- yes)
- ;;
- *)
- WITH_DICT_NOCASE=""
- esac
-
-fi
-
-if test "X$WITH_DICT_NOCASE" = "Xyes"; then
- cat >> confdefs.h <<\EOF
-#define WITH_DICT_NOCASE 1
-EOF
-
-fi
-
ASCEND_BINARY=yes
# Check whether --with-ascend-binary or --without-ascend-binary was given.
if test "${with_ascend_binary+set}" = set; then
fi
-WITH_THREAD_POOL=no
-# Check whether --with-thread-pool or --without-thread-pool was given.
-if test "${with_thread_pool+set}" = set; then
- withval="$with_thread_pool"
- case "$withval" in
- yes)
- WITH_THREAD_POOL=yes
- ;;
- *)
- ;;
- esac
-
-fi
-
-
WITH_SNMP=yes
# Check whether --with-snmp or --without-snmp was given.
if test "${with_snmp+set}" = set; then
fi
-# Check whether --enable-ltdl-install or --disable-ltdl-install was given.
-if test "${enable_ltdl_install+set}" = set; then
- enableval="$enable_ltdl_install"
- :
-fi
+rad_enable_largefiles=no
+# Check whether --with-large-files or --without-large-files was given.
+if test "${with_large_files+set}" = set; then
+ withval="$with_large_files"
+ case "$withval" in
+ yes)
+ rad_enable_largefiles=yes
+ ;;
+ *)
+ ;;
+ esac
-if test x"${enable_ltdl_install+set}" != xset; then
- enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
fi
-subdirs="libltdl"
+
+
STATIC_MODULES=
# Check whether --enable-developer or --disable-developer was given.
if test "${enable_developer+set}" = set; then
enableval="$enable_developer"
- case "$withval" in
- *)
+ case "$enableval" in
+ no)
developer=no
;;
- yes)
+ *)
developer=yes
esac
developer="yes"
fi
+EXPERIMENTAL=
+# Check whether --with-experimental-modules or --without-experimental-modules was given.
+if test "${with_experimental_modules+set}" = set; then
+ withval="$with_experimental_modules"
+ case "$withval" in
+ yes)
+ EXPERIMENTAL=yes
+ ;;
+ *)
+ esac
+
+fi
+
+
+# Check whether --with-openssl-includes or --without-openssl-includes was given.
+if test "${with_openssl_includes+set}" = set; then
+ withval="$with_openssl_includes"
+ case "$withval" in
+ *) OPENSSL_INCLUDE="$withval"
+ ;;
+ esac
+
+fi
+
+
+
+# Check whether --with-openssl-libraries or --without-openssl-libraries was given.
+if test "${with_openssl_libraries+set}" = set; then
+ withval="$with_openssl_libraries"
+ case "$withval" in
+ *) OPENSSL_LIBS="$withval"
+ ;;
+ esac
+
+fi
+
+
+
+
+
+# Check whether --with-rlm-FOO-lib-dir or --without-rlm-FOO-lib-dir was given.
+if test "${with_rlm_FOO_lib_dir+set}" = set; then
+ withval="$with_rlm_FOO_lib_dir"
+ case "$withval" in
+ *)
+ ;;
+ esac
+
+fi
+
+
+# Check whether --with-rlm-FOO-include-dir or --without-rlm-FOO-include-dir was given.
+if test "${with_rlm_FOO_include_dir+set}" = set; then
+ withval="$with_rlm_FOO_include_dir"
+ case "$withval" in
+ *)
+ ;;
+ esac
+
+fi
+
+
+
+WITH_UDPFROMTO=no
+# Check whether --with-udpfromto or --without-udpfromto was given.
+if test "${with_udpfromto+set}" = set; then
+ withval="$with_udpfromto"
+ case "$withval" in
+ yes)
+ WITH_UDPFROMTO=yes
+ ;;
+ *)
+ WITH_UDPFROMTO=no
+ esac
+
+fi
+
+
+if test "x$WITH_UDPFROMTO" = "xyes"; then
+ cat >> confdefs.h <<\EOF
+#define WITH_UDPFROMTO 1
+EOF
+
+fi
+CHECKRAD=checkrad.pl
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1797: checking for $ac_word" >&5
+echo "configure:5809: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test ! -x $ac_cv_path_PERL; then
- { echo "configure: error: perl not found - fatal" 1>&2; exit 1; }
+if test "x$ac_cv_path_PERL" = "x"; then
+ echo "configure: warning: perl not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
fi
# Extract the first word of "snmpget", so it can be a program name with args.
set dummy snmpget; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1836: checking for $ac_word" >&5
+echo "configure:5848: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SNMPGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_SNMPGET" && ac_cv_path_SNMPGET="/usr/local/bin/snmpget"
;;
esac
fi
echo "$ac_t""no" 1>&6
fi
+if test "x$ac_cv_path_SNMPGET" = "x"; then
+ echo "configure: warning: snmpget not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
+fi
+
# Extract the first word of "snmpwalk", so it can be a program name with args.
set dummy snmpwalk; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1872: checking for $ac_word" >&5
+echo "configure:5887: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SNMPWALK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_SNMPWALK" && ac_cv_path_SNMPWALK="/usr/local/bin/snmpwalk"
;;
esac
fi
echo "$ac_t""no" 1>&6
fi
+if test "x$ac_cv_path_SNMPWALK" = "x"; then
+ echo "configure: warning: snmpwalk not found - Simultaneous-Use and checkrad.pl may not work" 1>&2
+fi
+
# Extract the first word of "rusers", so it can be a program name with args.
set dummy rusers; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1908: checking for $ac_word" >&5
+echo "configure:5926: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RUSERS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1944: checking for working aclocal" >&5
+echo "configure:5962: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1957: checking for working autoconf" >&5
+echo "configure:5975: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1970: checking for working autoheader" >&5
+echo "configure:5988: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "locate", so it can be a program name with args.
set dummy locate; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1986: checking for $ac_word" >&5
+echo "configure:6004: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LOCATE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dirname", so it can be a program name with args.
set dummy dirname; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2021: checking for $ac_word" >&5
+echo "configure:6039: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DIRNAME'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "grep", so it can be a program name with args.
set dummy grep; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2056: checking for $ac_word" >&5
+echo "configure:6074: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GREP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-echo $ac_n "checking for AIX""... $ac_c" 1>&6
-echo "configure:2090: checking for AIX" >&5
-cat > conftest.$ac_ext <<EOF
-#line 2092 "configure"
-#include "confdefs.h"
-#ifdef _AIX
- yes
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "yes" >/dev/null 2>&1; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
-#define _ALL_SOURCE 1
-EOF
-
-else
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-
-
-
-PTHREADLIB=
-if test "$WITH_THREADS" = "yes"; then
+old_CFLAGS=$CFLAGS
+if test "x$WITH_THREADS" = "xyes"; then
if test $ac_cv_prog_suncc = "yes"; then
CFLAGS="$CFLAGS -mt"
fi
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2125: checking for $ac_hdr" >&5
+echo "configure:6118: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2130 "configure"
+#line 6123 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
else
echo "$ac_t""no" 1>&6
+WITH_THREADS="no"
fi
done
- if test "X$ac_cv_header_pthread_h" = "X"; then
- { echo "configure: error: "You are trying to use threads without a POSIX <pthread.h>"" 1>&2; exit 1; }
- fi
-
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:2167: checking for pthread_create in -lpthread" >&5
+echo "configure:6157: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lpthread $LIBS"
+LIBS="-lpthread $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6165 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_create();
+
+int main() {
+pthread_create()
+; return 0; }
+EOF
+if { (eval echo configure:6176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ CFLAGS="$CFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS"
+ LIBS="$LIBS -lpthread"
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
+echo "configure:6196: checking for pthread_create in -lc_r" >&5
+ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2175 "configure"
+#line 6204 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:2186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6215: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- PTHREADLIB="-lpthread"
-
+ CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE"
else
echo "$ac_t""no" 1>&6
+ WITH_THREADS="no"
+
fi
+
+fi
- if test "X$PTHREADLIB" = "X"; then
- SAVED_CFLAGS=$CFLAGS
- CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE"
- echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:2212: checking for pthread_create in -lc_r" >&5
-ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+fi
+
+if test "x$WITH_THREADS" != "xyes"; then
+ CFLAGS=$old_CFLAGS
+ ac_cv_header_pthread_h="no"
+ WITH_THREADS=no
+else
+
+
+echo $ac_n "checking for library containing sem_init""... $ac_c" 1>&6
+echo "configure:6250: checking for library containing sem_init" >&5
+if eval "test \"`echo '$''{'ac_cv_search_sem_init'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lc_r $LIBS"
+ ac_func_search_save_LIBS="$LIBS"
+ac_cv_search_sem_init="no"
cat > conftest.$ac_ext <<EOF
-#line 2220 "configure"
+#line 6257 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char pthread_create();
+char sem_init();
int main() {
-pthread_create()
+sem_init()
; return 0; }
EOF
-if { (eval echo configure:2231: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ ac_cv_search_sem_init="none required"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
+test "$ac_cv_search_sem_init" = "no" && for i in pthread sem posix4 rt; do
+LIBS="-l$i $ac_func_search_save_LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6279 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char sem_init();
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- PTHREADLIB="-lc_r"
-
+int main() {
+sem_init()
+; return 0; }
+EOF
+if { (eval echo configure:6290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_search_sem_init="-l$i"
+break
else
- echo "$ac_t""no" 1>&6
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+LIBS="$ac_func_search_save_LIBS"
fi
- fi
-
- if test "x$PTHREADLIB" = "x"; then
- CFLAGS=$SAVED_CFLAGS
- ac_cv_header_pthread_h="no"
- else
- LIBS="$LIBS $PTHREADLIB"
- CFLAGS="$CFLAGS -D_REENTRANT"
- fi
+echo "$ac_t""$ac_cv_search_sem_init" 1>&6
+if test "$ac_cv_search_sem_init" != "no"; then
+ test "$ac_cv_search_sem_init" = "none required" || LIBS="$ac_cv_search_sem_init $LIBS"
+
+else :
+ { echo "configure: error: -lsem not found. You may want to download it from ftp://ftp.to.gd-es.com/pub/BSDI/libsem.tar.bz2 or ftp://ftp.freeradius.org/pub/radius/contrib/libsem.tar.gz" 1>&2; exit 1; }
+
+fi
fi
echo $ac_n "checking for getsockname in -lsocket""... $ac_c" 1>&6
-echo "configure:2264: checking for getsockname in -lsocket" >&5
+echo "configure:6314: checking for getsockname in -lsocket" >&5
ac_lib_var=`echo socket'_'getsockname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2272 "configure"
+#line 6322 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
getsockname()
; return 0; }
EOF
-if { (eval echo configure:2283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for inet_aton in -lresolv""... $ac_c" 1>&6
-echo "configure:2312: checking for inet_aton in -lresolv" >&5
+echo "configure:6362: checking for inet_aton in -lresolv" >&5
ac_lib_var=`echo resolv'_'inet_aton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2320 "configure"
+#line 6370 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_aton()
; return 0; }
EOF
-if { (eval echo configure:2331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6
-echo "configure:2360: checking for inet_ntoa in -lnsl" >&5
+echo "configure:6410: checking for inet_ntoa in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2368 "configure"
+#line 6418 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:2379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
+case "$host" in
+*-interix*)
+ CFLAGS="$CFLAGS -D_ALL_SOURCE"
+ ;;
+esac
+
ac_header_dirent=no
for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:2413: checking for $ac_hdr that defines DIR" >&5
+echo "configure:6469: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2418 "configure"
+#line 6474 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:2426: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6482: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:2451: checking for opendir in -ldir" >&5
+echo "configure:6507: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2459 "configure"
+#line 6515 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:2470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:2492: checking for opendir in -lx" >&5
+echo "configure:6548: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2500 "configure"
+#line 6556 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:2511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2534: checking for ANSI C header files" >&5
+echo "configure:6590: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2539 "configure"
+#line 6595 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2547: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6603: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2564 "configure"
+#line 6620 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2582 "configure"
+#line 6638 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2603 "configure"
+#line 6659 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2638: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:6694: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2643 "configure"
+#line 6699 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_header_time=no
+ ac_cv_header_time=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_time" 1>&6
+if test $ac_cv_header_time = yes; then
+ cat >> confdefs.h <<\EOF
+#define TIME_WITH_SYS_TIME 1
+EOF
+
+fi
+
+echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
+echo "configure:6729: checking for sys/wait.h that is POSIX.1 compatible" >&5
+if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6734 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+int main() {
+int s;
+wait (&s);
+s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+; return 0; }
+EOF
+if { (eval echo configure:6750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_header_sys_wait_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_sys_wait_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
+if test $ac_cv_header_sys_wait_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_WAIT_H 1
+EOF
+
+fi
+
+
+for ac_hdr in \
+ unistd.h \
+ crypt.h \
+ errno.h \
+ resource.h \
+ getopt.h \
+ malloc.h \
+ utmp.h \
+ utmpx.h \
+ signal.h \
+ sys/select.h \
+ syslog.h \
+ inttypes.h \
+ stdint.h \
+ stdio.h \
+ netdb.h \
+ semaphore.h \
+ arpa/inet.h \
+ netinet/in.h \
+ sys/types.h \
+ sys/socket.h \
+ sys/time.h \
+ sys/wait.h \
+ sys/security.h \
+ fcntl.h \
+ sys/fcntl.h \
+ prot.h \
+ sia.h \
+ siad.h
+
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:6804: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6809 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6814: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+REGEX=no
+ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for regex.h""... $ac_c" 1>&6
+echo "configure:6844: checking for regex.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6849 "configure"
+#include "confdefs.h"
+#include <regex.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6854: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_REGEX_H 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "x$ac_cv_header_regex_h" = "xyes"; then
+ REGEX_EXTENDED=no
+ REGEX=yes
+ cat > conftest.$ac_ext <<EOF
+#line 6882 "configure"
+#include "confdefs.h"
+#include <regex.h>
+ #ifdef REG_EXTENDED
+ yes
+ #endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define HAVE_REG_EXTENDED 1
+EOF
+ REGEX_EXTENDED=yes
+fi
+rm -f conftest*
+
+fi
+
+
+
+if test "x$ac_cv_header_sys_security_h" = "xyes" && test "x$ac_cv_header_prot_h" = "xyes"
+then
+ cat >> confdefs.h <<\EOF
+#define OSFC2 1
+EOF
+
+fi
+
+if test "x$ac_cv_header_sia_h" = "xyes" && test "x$ac_cv_header_siad_h" = "xyes"
+then
+ cat >> confdefs.h <<\EOF
+#define OSFSIA 1
+EOF
+
+fi
+
+smart_try_dir="$OPENSSL_INCLUDE"
+CFLAGS="$CFLAGS -DOPENSSL_NO_KRB5"
+
+
+ac_safe=`echo "openssl/ssl.h" | sed 'y%./+-%__pm%'`
+echo $ac_n "checking for openssl/ssl.h""... $ac_c" 1>&6
+echo "configure:6926: checking for openssl/ssl.h" >&5
+
+smart_include=
+smart_include_dir=
+
+ old_CFLAGS="$CFLAGS"
+ cat > conftest.$ac_ext <<EOF
+#line 6933 "configure"
+#include "confdefs.h"
+
+ #include <openssl/ssl.h>
+int main() {
+ int a = 1;
+; return 0; }
+EOF
+if { (eval echo configure:6941: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ smart_include=" "
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ smart_include=
fi
rm -f conftest*
-fi
-echo "$ac_t""$ac_cv_header_time" 1>&6
-if test $ac_cv_header_time = yes; then
- cat >> confdefs.h <<\EOF
-#define TIME_WITH_SYS_TIME 1
-EOF
+ if test "x$smart_include" = "x"; then
+
+
+if test "x$LOCATE" != "x"; then
+ DIRS=
+ file=openssl/ssl.h
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+ if test "x$x" = "x$base"; then
+ continue;
+ fi
+
+ dir=`${DIRNAME} $x 2>/dev/null`
+ exclude=`echo ${dir} | ${GREP} /home`
+ if test "x$exclude" != "x"; then
+ continue
+ fi
+ already=`echo \$smart_include_dir ${DIRS} | ${GREP} ${dir}`
+ if test "x$already" = "x"; then
+ DIRS="$DIRS $dir"
+ fi
+ done
fi
-echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2673: checking for sys/wait.h that is POSIX.1 compatible" >&5
-if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2678 "configure"
+eval "smart_include_dir=\"\$smart_include_dir $DIRS\""
+
+
+ for try in $smart_try_dir $smart_include_dir /usr/local/include/ /opt/include; do
+ CFLAGS="$old_CFLAGS -I$try"
+
+ cat > conftest.$ac_ext <<EOF
+#line 6985 "configure"
#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
+
+ #include <openssl/ssl.h>
int main() {
-int s;
-wait (&s);
-s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+ int a = 1;
; return 0; }
EOF
-if { (eval echo configure:2694: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_header_sys_wait_h=yes
+ smart_include="-I$try"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_header_sys_wait_h=no
+ smart_include=
fi
rm -f conftest*
-fi
-echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
-if test $ac_cv_header_sys_wait_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_WAIT_H 1
-EOF
+ if test "x$smart_include" != "x"; then
+ break;
+ fi
+ done
+ CFLAGS="$old_CFLAGS"
+ fi
+ if test "x$smart_include" != "x"; then
+ echo "$ac_t""yes" 1>&6
+ eval "ac_cv_header_$ac_safe=yes"
+ CFLAGS="$old_CFLAGS $smart_include"
+ SMART_CFLAGS="$SMART_CFLAGS $smart_include"
+ else
+ echo "$ac_t""no" 1>&6
fi
+if test "x$ac_cv_header_openssl_ssl_h" = "xyes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_OPENSSL_SSL_H 1
+EOF
-for ac_hdr in \
- unistd.h \
- crypt.h \
- errno.h \
- resource.h \
- getopt.h \
- malloc.h \
- utmp.h \
- utmpx.h \
- signal.h \
- sys/select.h \
- syslog.h \
- inttypes.h \
- stdint.h \
- stdio.h \
- netdb.h \
- semaphore.h \
- arpa/inet.h \
- netinet/in.h \
- sys/types.h \
- sys/socket.h \
- sys/time.h
-
+ old_CPPFLAGS="$CPPFLAGS"
+ if test "x$OPENSSL_INCLUDE" != "x"; then
+ CPPFLAGS="-I$OPENSSL_INCLUDE $CPPFLAGS"
+ fi
+ for ac_hdr in \
+ openssl/err.h \
+ openssl/crypto.h \
+ openssl/rand.h \
+ openssl/engine.h
+
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2741: checking for $ac_hdr" >&5
+echo "configure:7038: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2746 "configure"
+#line 7043 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7048: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
+ CPPFLAGS="$old_CPPFLAGS"
-REGEX=no
-ac_safe=`echo "regex.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for regex.h""... $ac_c" 1>&6
-echo "configure:2781: checking for regex.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
+ echo $ac_n "checking for OpenSSL version >= 0.9.7""... $ac_c" 1>&6
+echo "configure:7077: checking for OpenSSL version >= 0.9.7" >&5
+ old_CPPFLAGS=$CPPFLAGS
+ if test "x$OPENSSL_INCLUDE" != "x"; then
+ CPPFLAGS="-I$OPENSSL_INCLUDE"
+ fi
+ cat > conftest.$ac_ext <<EOF
+#line 7083 "configure"
+#include "confdefs.h"
+#include <openssl/crypto.h>
+ #if (OPENSSL_VERSION_NUMBER >= 0x00907000L)
+ yes
+ #endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ goodssl="yes"
+fi
+rm -f conftest*
+
+ if test "x$goodssl" != "xyes"; then
+ echo "$ac_t""no" 1>&6
+ OPENSSL_INCLUDE=
+ OPENSSL_LIBS=
+ else
+ echo "$ac_t""yes" 1>&6
+
+ # Look for the OpenSSL libraries.
+ smart_try_dir=$OPENSSL_LIBS
+
+
+sm_lib_safe=`echo "crypto" | sed 'y%./+-%__p_%'`
+sm_func_safe=`echo "DH_new" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for DH_new in -lcrypto""... $ac_c" 1>&6
+echo "configure:7112: checking for DH_new in -lcrypto" >&5
+
+smart_lib=
+smart_lib_dir=
+
+ old_LIBS="$LIBS"
+ LIBS="$LIBS -lcrypto"
cat > conftest.$ac_ext <<EOF
-#line 2786 "configure"
+#line 7120 "configure"
#include "confdefs.h"
-#include <regex.h>
+extern char DH_new();
+int main() {
+ DH_new()
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2791: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:7127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ smart_lib="-lcrypto"
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
+
+ if test "x$smart_lib" = "x"; then
+
+
+if test "x$LOCATE" != "x"; then
+ DIRS=
+ file=libcrypto${libltdl_cv_shlibext}
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+ if test "x$x" = "x$base"; then
+ continue;
+ fi
+
+ dir=`${DIRNAME} $x 2>/dev/null`
+ exclude=`echo ${dir} | ${GREP} /home`
+ if test "x$exclude" != "x"; then
+ continue
+ fi
+
+ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
+ if test "x$already" = "x"; then
+ DIRS="$DIRS $dir"
+ fi
+ done
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_REGEX_H 1
-EOF
+eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
+
+
+
+if test "x$LOCATE" != "x"; then
+ DIRS=
+ file=libcrypto.a
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+ if test "x$x" = "x$base"; then
+ continue;
+ fi
+
+ dir=`${DIRNAME} $x 2>/dev/null`
+ exclude=`echo ${dir} | ${GREP} /home`
+ if test "x$exclude" != "x"; then
+ continue
+ fi
+
+ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
+ if test "x$already" = "x"; then
+ DIRS="$DIRS $dir"
+ fi
+ done
+fi
+
+eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
+
+
+ for try in $smart_try_dir $smart_lib_dir /usr/local/lib/ /opt/lib; do
+ LIBS="$old_LIBS -L$try -lcrypto"
+
+ cat > conftest.$ac_ext <<EOF
+#line 7196 "configure"
+#include "confdefs.h"
+extern char DH_new();
+int main() {
+ DH_new()
+; return 0; }
+EOF
+if { (eval echo configure:7203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ smart_lib="-L$try -lcrypto"
else
- echo "$ac_t""no" 1>&6
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
+rm -f conftest*
+ if test "x$smart_lib" != "x"; then
+ break;
+ fi
+ done
+ LIBS="$old_LIBS"
+ fi
-if test "x$ac_cv_header_regex_h" = "xyes"; then
- REGEX_EXTENDED=no
- REGEX=yes
+ if test "x$smart_lib" != "x"; then
+ echo "$ac_t""yes" 1>&6
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$old_LIBS $smart_lib"
+ SMART_LIBS="$SMART_LIBS $smart_lib"
+ else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "x$ac_cv_lib_crypto_DH_new" = "xyes"; then
+
+
+sm_lib_safe=`echo "ssl" | sed 'y%./+-%__p_%'`
+sm_func_safe=`echo "SSL_new" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for SSL_new in -lssl""... $ac_c" 1>&6
+echo "configure:7233: checking for SSL_new in -lssl" >&5
+
+smart_lib=
+smart_lib_dir=
+
+ old_LIBS="$LIBS"
+ LIBS="$LIBS -lssl"
cat > conftest.$ac_ext <<EOF
-#line 2819 "configure"
+#line 7241 "configure"
#include "confdefs.h"
-#include <regex.h>
- #ifdef REG_EXTENDED
- yes
- #endif
-
+extern char SSL_new();
+int main() {
+ SSL_new()
+; return 0; }
+EOF
+if { (eval echo configure:7248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ smart_lib="-lssl"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+
+ if test "x$smart_lib" = "x"; then
+
+
+if test "x$LOCATE" != "x"; then
+ DIRS=
+ file=libssl${libltdl_cv_shlibext}
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+ if test "x$x" = "x$base"; then
+ continue;
+ fi
+
+ dir=`${DIRNAME} $x 2>/dev/null`
+ exclude=`echo ${dir} | ${GREP} /home`
+ if test "x$exclude" != "x"; then
+ continue
+ fi
+
+ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
+ if test "x$already" = "x"; then
+ DIRS="$DIRS $dir"
+ fi
+ done
+fi
+
+eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
+
+
+
+if test "x$LOCATE" != "x"; then
+ DIRS=
+ file=libssl.a
+
+ for x in `${LOCATE} $file 2>/dev/null`; do
+ base=`echo $x | sed "s%/${file}%%"`
+ if test "x$x" = "x$base"; then
+ continue;
+ fi
+
+ dir=`${DIRNAME} $x 2>/dev/null`
+ exclude=`echo ${dir} | ${GREP} /home`
+ if test "x$exclude" != "x"; then
+ continue
+ fi
+
+ already=`echo \$smart_lib_dir ${DIRS} | ${GREP} ${dir}`
+ if test "x$already" = "x"; then
+ DIRS="$DIRS $dir"
+ fi
+ done
+fi
+
+eval "smart_lib_dir=\"\$smart_lib_dir $DIRS\""
+
+
+ for try in $smart_try_dir $smart_lib_dir /usr/local/lib/ /opt/lib; do
+ LIBS="$old_LIBS -L$try -lssl"
+
+ cat > conftest.$ac_ext <<EOF
+#line 7317 "configure"
+#include "confdefs.h"
+extern char SSL_new();
+int main() {
+ SSL_new()
+; return 0; }
EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "yes" >/dev/null 2>&1; then
+if { (eval echo configure:7324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_REG_EXTENDED 1
-EOF
- REGEX_EXTENDED=yes
+ smart_lib="-L$try -lssl"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
rm -f conftest*
+ if test "x$smart_lib" != "x"; then
+ break;
+ fi
+ done
+ LIBS="$old_LIBS"
+ fi
+ if test "x$smart_lib" != "x"; then
+ echo "$ac_t""yes" 1>&6
+ eval "ac_cv_lib_${sm_lib_safe}_${sm_func_safe}=yes"
+ LIBS="$old_LIBS $smart_lib"
+ SMART_LIBS="$SMART_LIBS $smart_lib"
+ else
+ echo "$ac_t""no" 1>&6
fi
-
-
+ if test "x$ac_cv_lib_ssl_SSL_new" != "xyes"; then
+ OPENSSL_INCLUDE=
+ OPENSSL_LIBS=
+ fi
+ export OPENSSL_INCLUDE OPENSSL_LIBS
+ fi
+ fi
+ CPPFLAGS=$old_CPPFLAGS
+fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2844: checking for off_t" >&5
+echo "configure:7360: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2849 "configure"
+#line 7365 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2877: checking for pid_t" >&5
+echo "configure:7393: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2882 "configure"
+#line 7398 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2910: checking for size_t" >&5
+echo "configure:7426: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2915 "configure"
+#line 7431 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:2943: checking for uid_t in sys/types.h" >&5
+echo "configure:7459: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2948 "configure"
+#line 7464 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:2979: checking for socklen_t" >&5
+echo "configure:7495: checking for socklen_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_socklen_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_socklen_t=no
cat > conftest.$ac_ext <<EOF
-#line 2985 "configure"
+#line 7501 "configure"
#include "confdefs.h"
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
socklen_t foo
; return 0; }
EOF
-if { (eval echo configure:2998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_socklen_t=yes
else
echo $ac_n "checking for uint8_t""... $ac_c" 1>&6
-echo "configure:3022: checking for uint8_t" >&5
+echo "configure:7538: checking for uint8_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_uint8_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_uint8_t=no
cat > conftest.$ac_ext <<EOF
-#line 3028 "configure"
+#line 7544 "configure"
#include "confdefs.h"
#ifdef HAVE_INTTYPES_H
#include <inttypes.h>
uint8_t foo
; return 0; }
EOF
-if { (eval echo configure:3041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_uint8_t=yes
else
+ echo $ac_n "checking for uint16_t""... $ac_c" 1>&6
+echo "configure:7581: checking for uint16_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_uint16_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_type_uint16_t=no
+ cat > conftest.$ac_ext <<EOF
+#line 7587 "configure"
+#include "confdefs.h"
+#ifdef HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+int main() {
+uint16_t foo
+; return 0; }
+EOF
+if { (eval echo configure:7600: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_type_uint16_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+
+
+fi
+
+echo "$ac_t""$ac_cv_type_uint16_t" 1>&6
+
+ if test "$ac_cv_type_uint16_t" != "yes"; then
+ cat >> confdefs.h <<\EOF
+#define uint16_t unsigned short
+EOF
+
+ fi
+
+
+
echo $ac_n "checking for uint32_t""... $ac_c" 1>&6
-echo "configure:3065: checking for uint32_t" >&5
+echo "configure:7624: checking for uint32_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_uint32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_uint32_t=no
cat > conftest.$ac_ext <<EOF
-#line 3071 "configure"
+#line 7630 "configure"
#include "confdefs.h"
#ifdef HAVE_INTTYPES_H
#include <inttypes.h>
uint32_t foo
; return 0; }
EOF
-if { (eval echo configure:3084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7643: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_uint32_t=yes
else
strsignal \
sigaction \
sigprocmask \
+ pthread_sigmask \
snprintf \
vsnprintf \
setsid \
strncasecmp \
strcasecmp \
+ localtime_r \
+ ctime_r \
+ gmtime_r \
strsep \
inet_aton \
gethostname \
setlinebuf \
setvbuf \
- sem_init \
- getusershell
+ getusershell \
+ initgroups
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_func" >&5
+echo "configure:7690: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3132 "configure"
+#line 7695 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:3191: checking whether $ac_func must be declared" >&5
+echo "configure:7754: checking whether $ac_func must be declared" >&5
if eval "test \"`echo '$''{'radius_cv_decl_needed_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3196 "configure"
+#line 7759 "configure"
#include "confdefs.h"
#include <stdio.h>
#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
-#endif
-#ifdef HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-#ifdef HAVE_REGEX_H
-#include <regex.h>
-#endif
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-#include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_ARPA_INET_H
-#include <arpa/inet.h>
-#endif
-
-int main() {
-char *(*pfn) = (char *(*)) $ac_func
-; return 0; }
-EOF
-if { (eval echo configure:3251: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- eval "radius_cv_decl_needed_$ac_func=no"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "radius_cv_decl_needed_$ac_func=yes"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$radius_cv_decl_needed_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- radius_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $radius_tr_decl 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-done
-
-
-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:3278: checking return type of signal handlers" >&5
-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3283 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-#ifdef signal
-#undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
-
-int main() {
-int i;
-; return 0; }
-EOF
-if { (eval echo configure:3300: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_type_signal=void
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_type_signal=int
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_type_signal" 1>&6
-cat >> confdefs.h <<EOF
-#define RETSIGTYPE $ac_cv_type_signal
-EOF
-
-
-
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3321: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3326 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this. */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this. */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in an arm
- of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:3375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_const=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
- cat >> confdefs.h <<\EOF
-#define const
-EOF
-
-fi
-
-
-echo $ac_n "checking type of OS""... $ac_c" 1>&6
-echo "configure:3397: checking type of OS" >&5
-OS=`uname -s`
-echo "$ac_t""$OS" 1>&6
-if test "$OS" = "OS/2"; then
- LIBPREFIX=
-else
- LIBPREFIX=lib
-fi
-
-
-if test "x$GCC" = "xyes"; then
- CFLAGS="$CFLAGS -Wall -D_GNU_SOURCE"
-fi
-
-echo $ac_n "checking for developer gcc flags""... $ac_c" 1>&6
-echo "configure:3412: checking for developer gcc flags" >&5
-if test "x$developer" = "xyes" -a "x$GCC" = "xyes"; then
- devflags="-Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs"
- CFLAGS="$CFLAGS $devflags"
- INSTALLSTRIP=""
- echo "$ac_t""yes. Using $devflags" 1>&6
-else
- devflags="none"
- CFLAGS="$CFLAGS -DNDEBUG"
- INSTALLSTRIP="-s"
- echo "$ac_t""no." 1>&6
-fi
-
-
-echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:3427: checking for crypt in -lcrypt" >&5
-ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lcrypt $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3435 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char crypt();
+#endif
+#ifdef HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+#ifdef HAVE_REGEX_H
+#include <regex.h>
+#endif
+#ifdef HAVE_SYSLOG_H
+#include <syslog.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
int main() {
-crypt()
+char *(*pfn) = (char *(*)) $ac_func
; return 0; }
EOF
-if { (eval echo configure:3446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ eval "radius_cv_decl_needed_$ac_func=no"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ eval "radius_cv_decl_needed_$ac_func=yes"
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+
+if eval "test \"`echo '$radius_cv_decl_needed_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- CRYPTLIB="-lcrypt"
+ radius_tr_decl=NEED_DECLARATION_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $radius_tr_decl 1
+EOF
else
echo "$ac_t""no" 1>&6
fi
+done
-if test "$CRYPTLIB" != ""; then
- cat >> confdefs.h <<\EOF
-#define HAVE_CRYPT 1
-EOF
-else
- echo $ac_n "checking for crypt""... $ac_c" 1>&6
-echo "configure:3475: checking for crypt" >&5
-if eval "test \"`echo '$''{'ac_cv_func_crypt'+set}'`\" = set"; then
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:7841: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3480 "configure"
+#line 7846 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char crypt(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char crypt();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_crypt) || defined (__stub___crypt)
-choke me
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
#else
-crypt();
+void (*signal ()) ();
#endif
+int main() {
+int i;
; return 0; }
EOF
-if { (eval echo configure:3503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_func_crypt=yes"
+ ac_cv_type_signal=void
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_crypt=no"
+ ac_cv_type_signal=int
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'crypt`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_CRYPT 1
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
EOF
-else
- echo "$ac_t""no" 1>&6
-fi
-fi
-if test "x$WITH_SNMP" = "xyes"; then
-
-
-
+if test "x$ac_cv_header_utmpx_h" = "xyes"
+then
+
+ echo $ac_n "checking for ut_xtime in struct utmpx""... $ac_c" 1>&6
+echo "configure:7886: checking for ut_xtime in struct utmpx" >&5
-echo $ac_n "checking for asn1.h""... $ac_c" 1>&6
-echo "configure:3533: checking for asn1.h" >&5
-cat > conftest.$ac_ext <<EOF
-#line 3536 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 7890 "configure"
#include "confdefs.h"
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
+#include <utmpx.h>
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
#endif
-#include <asn1.h>
+
int main() {
- int a = 1;
+ int foo = offsetof(struct utmpx, ut_xtime)
; return 0; }
EOF
-if { (eval echo configure:3559: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7902: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- SNMP_INCLUDE=" "
+ has_element=" "
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- SNMP_INCLUDE=
+ has_element=
fi
rm -f conftest*
-if test "x$SNMP_INCLUDE" = "x"; then
- old_CFLAGS="$CFLAGS"
- for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
- CFLAGS="$old_CFLAGS -I$try"
- cat > conftest.$ac_ext <<EOF
-#line 3575 "configure"
+ ac_safe_type=`echo "struct utmpx" | sed 'y% %_%'`
+ if test "x$has_element" != "x"; then
+ echo "$ac_t""yes" 1>&6
+ eval "ac_cv_type_${ac_safe_type}_has_ut_xtime=yes"
+ else
+ echo "$ac_t""no" 1>&6
+ eval "ac_cv_type_${ac_safe_type}_has_ut_xtime="
+ fi
+
+ if test "x$ac_cv_type_struct_utmpx_has_ut_xtime" = "x"
+ then
+ cat >> confdefs.h <<\EOF
+#define ut_xtime ut_tv.tv_sec
+EOF
+
+ fi
+fi
+
+
+ echo $ac_n "checking for ipi_addr in struct in_pktinfo""... $ac_c" 1>&6
+echo "configure:7933: checking for ipi_addr in struct in_pktinfo" >&5
+
+
+ cat > conftest.$ac_ext <<EOF
+#line 7937 "configure"
#include "confdefs.h"
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
+#include <netinet/in.h>
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <asn1.h>
+
int main() {
- int a = 1;
+ int foo = offsetof(struct in_pktinfo, ipi_addr)
; return 0; }
EOF
-if { (eval echo configure:3598: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- SNMP_INCLUDE="-I$try"
+ has_element=" "
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- SNMP_INCLUDE=
+ has_element=
fi
rm -f conftest*
- if test "x$SNMP_INCLUDE" != "x"; then
- break;
- fi
- done
- CFLAGS="$old_CFLAGS"
-fi
-if test "x$SNMP_INCLUDE" = "x"; then
- echo "$ac_t""no" 1>&6
-else
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_ASN1_H 1
+ ac_safe_type=`echo "struct in_pktinfo" | sed 'y% %_%'`
+ if test "x$has_element" != "x"; then
+ echo "$ac_t""yes" 1>&6
+ eval "ac_cv_type_${ac_safe_type}_has_ipi_addr=yes"
+ else
+ echo "$ac_t""no" 1>&6
+ eval "ac_cv_type_${ac_safe_type}_has_ipi_addr="
+ fi
+
+if test "x$ac_cv_type_struct_in_pktinfo_has_ipi_addr" = "xyes"
+then
+ cat >> confdefs.h <<\EOF
+#define HAVE_IP_PKTINFO 1
EOF
-
- old_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $SNMP_INCLUDE"
+fi
- echo $ac_n "checking for snmp.h""... $ac_c" 1>&6
-echo "configure:3628: checking for snmp.h" >&5
- cat > conftest.$ac_ext <<EOF
-#line 3630 "configure"
-#include "confdefs.h"
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_ASN1_H
-#include <asn1.h>
-#endif
-#include <snmp.h>
-int main() {
- int a = 1;
-; return 0; }
-EOF
-if { (eval echo configure:3656: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_SNMP_H 1
-EOF
- ac_cv_header_snmp_h=yes
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:7979: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test "x$ac_cv_header_snmp_h" = "xyes"; then
- echo "$ac_t""yes" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
-
- echo $ac_n "checking for snmp_impl.h""... $ac_c" 1>&6
-echo "configure:3674: checking for snmp_impl.h" >&5
- cat > conftest.$ac_ext <<EOF
-#line 3676 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 7984 "configure"
#include "confdefs.h"
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_STDIO_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifdef HAVE_ASN1_H
-#include <asn1.h>
-#endif
-#ifdef HAVE_SNMP_H
-#include <snmp.h>
-#endif
-#include <snmp_impl.h>
int main() {
- int a = 1;
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
; return 0; }
EOF
-if { (eval echo configure:3705: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8033: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_SNMP_IMPL_H 1
-EOF
- ac_cv_header_snmp_impl_h=yes
+ ac_cv_c_const=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
fi
rm -f conftest*
- if test "x$ac_cv_header_snmp_h" = "xyes"; then
- echo "$ac_t""yes" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
-
- echo $ac_n "checking for snmp_build_var_op in -lsnmp""... $ac_c" 1>&6
-echo "configure:3723: checking for snmp_build_var_op in -lsnmp" >&5
+fi
- old_LIBS="$LIBS"
- LIBS="$old_LIBS -lsnmp"
- cat > conftest.$ac_ext <<EOF
-#line 3728 "configure"
-#include "confdefs.h"
-extern char snmp_build_var_op();
-int main() {
- snmp_build_var_op()
-; return 0; }
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
EOF
-if { (eval echo configure:3735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- SNMP_LIBS="-lsnmp"
+
+fi
+
+
+echo $ac_n "checking type of OS""... $ac_c" 1>&6
+echo "configure:8055: checking type of OS" >&5
+OS=`uname -s`
+echo "$ac_t""$OS" 1>&6
+if test "$OS" = "OS/2"; then
+ LIBPREFIX=
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- SNMP_LIBS=
+ LIBPREFIX=lib
fi
-rm -f conftest*
- for try in /usr/lib /usr/local/lib /usr/local/snmp/lib $snmp_lib_dir; do
- LIBS="$old_LIBS -L$try -lsnmp"
- cat > conftest.$ac_ext <<EOF
-#line 3750 "configure"
+if test "x$GCC" = "xyes"; then
+ CFLAGS="$CFLAGS -Wall -D_GNU_SOURCE"
+fi
+
+echo $ac_n "checking for developer gcc flags""... $ac_c" 1>&6
+echo "configure:8070: checking for developer gcc flags" >&5
+if test "x$developer" = "xyes" -a "x$GCC" = "xyes"; then
+ devflags="-g -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -W -Wredundant-decls -Wundef"
+ CFLAGS="$CFLAGS $devflags"
+ INSTALLSTRIP=""
+ echo "$ac_t""yes. Using $devflags" 1>&6
+else
+ devflags=""
+ CFLAGS="$CFLAGS -DNDEBUG"
+ INSTALLSTRIP="-s"
+ echo "$ac_t""no." 1>&6
+fi
+
+
+echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
+echo "configure:8085: checking for crypt in -lcrypt" >&5
+ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcrypt $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 8093 "configure"
#include "confdefs.h"
-extern char snmp_build_var_op();
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char crypt();
+
int main() {
- snmp_build_var_op()
+crypt()
; return 0; }
EOF
-if { (eval echo configure:3757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- SNMP_LIBS="-L$try -lsnmp"
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- SNMP_LIBS=
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
- if test "x$SNMP_LIBS" != "x"; then
- break;
- fi
+LIBS="$ac_save_LIBS"
- LIBS="$old_LIBS -L$try -lsnmp -lcrypto"
- cat > conftest.$ac_ext <<EOF
-#line 3773 "configure"
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ CRYPTLIB="-lcrypt"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "$CRYPTLIB" != ""; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_CRYPT 1
+EOF
+
+else
+ echo $ac_n "checking for crypt""... $ac_c" 1>&6
+echo "configure:8132: checking for crypt" >&5
+if eval "test \"`echo '$''{'ac_cv_func_crypt'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 8137 "configure"
#include "confdefs.h"
-extern char snmp_build_var_op();
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char crypt(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char crypt();
+
int main() {
- snmp_build_var_op()
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_crypt) || defined (__stub___crypt)
+choke me
+#else
+crypt();
+#endif
+
; return 0; }
EOF
-if { (eval echo configure:3780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- SNMP_LIBS="-L$try -lsnmp -lcrypto"
+ eval "ac_cv_func_crypt=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- SNMP_LIBS=
+ eval "ac_cv_func_crypt=no"
fi
rm -f conftest*
- if test "x$SNMP_LIBS" != "x"; then
- break;
- fi
- done
- LIBS="$old_LIBS"
-
- CFLAGS="$old_CFLAGS"
- if test "x$SNMP_LIBS" = "x"; then
- echo "$ac_t""no" 1>&6
- SNMP_INCLUDE=
- else
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define WITH_SNMP 1
-EOF
+fi
- cat >> confdefs.h <<\EOF
-#define HAVE_LIBSNMP 1
+if eval "test \"`echo '$ac_cv_func_'crypt`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_CRYPT 1
EOF
- fi
+else
+ echo "$ac_t""no" 1>&6
fi
fi
-if test "X$ac_cv_func_sem_init" = "Xno"; then
-
- echo $ac_n "checking for sem_init in -lposix4""... $ac_c" 1>&6
-echo "configure:3818: checking for sem_init in -lposix4" >&5
-ac_lib_var=`echo posix4'_'sem_init | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for setkey in -lcipher""... $ac_c" 1>&6
+echo "configure:8185: checking for setkey in -lcipher" >&5
+ac_lib_var=`echo cipher'_'setkey | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lposix4 $LIBS"
+LIBS="-lcipher $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3826 "configure"
+#line 8193 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char sem_init();
+char setkey();
int main() {
-sem_init()
+setkey()
; return 0; }
EOF
-if { (eval echo configure:3837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo posix4 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
- LIBS="-lposix4 $LIBS"
+ CRYPTLIB="${CRYPTLIB} -lcipher"
else
echo "$ac_t""no" 1>&6
fi
- if test "X$ac_cv_lib_posix4_sem_init" = "X"; then
- if test "$WITH_THREAD_POOL" = "yes"; then
- echo "configure: warning: You do not have posix semaphores. Disabling thread pools" 1>&2
- fi
- WITH_THREAD_POOL=no
- fi
-fi
-
-
+if test "x$WITH_SNMP" = "xyes"; then
+
-echo "checking for PostgreSQL includes" 1>&6
-echo "configure:3879: checking for PostgreSQL includes" >&5
-
-if test $PGROOT ; then
- IS_LOCAL=1
-else
- if test -d /usr/local/pgsql ; then
- PGROOT="/usr/local/pgsql"
- ISLOCAL=1
- elif test -d /usr/local/postgresql ; then
- PGROOT="/usr/local/postgresql"
- ISLOCAL=1
- elif test -d /opt/pgsql ; then
- PGROOT="/opt/pgsql"
- ISLOCAL=1
- elif test -d /opt/postgresql ; then
- PGROOT="/opt/postgresql"
- ISLOCAL=1
- fi
-fi
-if test $PGROOT && test IS_LOCAL ; then
- if test -e $PGROOT/lib/libpq.so ; then
- if test -e $PGROOT/lib/libpq.a ; then
- PQ_LIBS="-L$PGROOT/lib -lpq"
- fi
- fi
- for ac_hdr in $PGROOT/include/libpq-fe.h $PGROOT/include/postgres.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3908: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3913 "configure"
+echo $ac_n "checking for asn1.h,snmp.h,snmp_impl.h""... $ac_c" 1>&6
+echo "configure:8233: checking for asn1.h,snmp.h,snmp_impl.h" >&5
+
+cat > conftest.$ac_ext <<EOF
+#line 8236 "configure"
#include "confdefs.h"
-#include <$ac_hdr>
+
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_STDIO_H
+#include <stdio.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <ucd-snmp/asn1.h>
+#include <ucd-snmp/snmp.h>
+#include <ucd-snmp/snmp_impl.h>
+int main() {
+ int a = 1;
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3918: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:8261: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ SNMP_INCLUDE="";ucdsnmp=yes
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ ucdsnmp=
fi
rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
+
+if test "x$ucdsnmp" = "x"; then
+ old_CFLAGS="$CFLAGS"
+ for try in /usr/include /usr/local/include $snmp_include_dir; do
+ CFLAGS="$old_CFLAGS -I$try"
+ cat > conftest.$ac_ext <<EOF
+#line 8277 "configure"
+#include "confdefs.h"
+
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_STDIO_H
+#include <stdio.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <ucd-snmp/asn1.h>
+#include <ucd-snmp/snmp.h>
+#include <ucd-snmp/snmp_impl.h>
+int main() {
+ int a = 1;
+; return 0; }
EOF
- FOUND_PG_HEADERS=1
+if { (eval echo configure:8302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ SNMP_INCLUDE="-I$try";ucdsnmp=yes
else
- echo "$ac_t""no" 1>&6
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ucdsnmp=
fi
-done
-
- if test $FOUND_PG_HEADERS ; then
- PG_INCLUDE_DIR="$PGROOT/include"
- fi
+rm -f conftest*
+ if test "x$ucdsnmp" != "x"; then
+ break;
+ fi
+ done
+ CFLAGS="$old_CFLAGS"
fi
-if test "x$PGROOT" = "x" ; then
- echo $ac_n "checking for PQconnectdb in -lpq""... $ac_c" 1>&6
-echo "configure:3951: checking for PQconnectdb in -lpq" >&5
-ac_lib_var=`echo pq'_'PQconnectdb | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lpq $LIBS"
+if test "x$ucdsnmp" = "x"; then
+ old_CFLAGS="$CFLAGS"
+ for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
+ CFLAGS="$old_CFLAGS -I$try"
cat > conftest.$ac_ext <<EOF
-#line 3959 "configure"
+#line 8324 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char PQconnectdb();
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_STDIO_H
+#include <stdio.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <asn1.h>
+#include <snmp.h>
+#include <snmp_impl.h>
int main() {
-PQconnectdb()
+ int a = 1;
; return 0; }
EOF
-if { (eval echo configure:3970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8349: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ SNMP_INCLUDE="";ucdsnmp=no
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ ucdsnmp=
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- FOUND_PQLIB=1
-else
- echo "$ac_t""no" 1>&6
+ if test "x$ucdsnmp" != "x"; then
+ break;
+ fi
+ done
+ CFLAGS="$old_CFLAGS"
fi
- if test $FOUND_PQLIB ; then
- PQ_LIBS="-lpq"
- fi
- if test -d /usr/include/pgsql ; then
- PG_INCLUDE_DIR="/usr/include/pgsql"
- PG_INCLUDED_DIR="$PG_INCLUDE_DIR/"
- elif test -d /usr/include/postgresql ; then
- PG_INCLUDE_DIR="/usr/include/postgresql"
- PG_INCLUDED_DIR="$PG_INCLUDE_DIR/"
- fi
- ac_safe=`echo ""${PG_INCLUDED_DIR}libpq-fe.h"" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for "${PG_INCLUDED_DIR}libpq-fe.h"""... $ac_c" 1>&6
-echo "configure:4002: checking for "${PG_INCLUDED_DIR}libpq-fe.h"" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4007 "configure"
+if test "x$ucdsnmp" = "x"; then
+ old_CFLAGS="$CFLAGS"
+ for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do
+ CFLAGS="$old_CFLAGS -I$try"
+ cat > conftest.$ac_ext <<EOF
+#line 8371 "configure"
#include "confdefs.h"
-#include <"${PG_INCLUDED_DIR}libpq-fe.h">
+
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_STDIO_H
+#include <stdio.h>
+#endif
+#ifdef HAVE_NETDB_H
+#include <netdb.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <asn1.h>
+#include <snmp.h>
+#include <snmp_impl.h>
+int main() {
+ int a = 1;
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:8396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ SNMP_INCLUDE="-I$try";ucdsnmp=no
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ ucdsnmp=
fi
rm -f conftest*
+ if test "x$ucdsnmp" != "x"; then
+ break;
+ fi
+ done
+ CFLAGS="$old_CFLAGS"
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_LIBPQ_FE_H 1
-EOF
-else
+if test "x$ucdsnmp" = "x"; then
echo "$ac_t""no" 1>&6
-fi
-
- ac_safe=`echo ""${PG_INCLUDED_DIR}postgres.h"" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for "${PG_INCLUDED_DIR}postgres.h"""... $ac_c" 1>&6
-echo "configure:4038: checking for "${PG_INCLUDED_DIR}postgres.h"" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
else
+ if test "x$ucdsnmp" = "xyes"; then
+ echo "$ac_t""(ucd-snmp)yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_UCD_SNMP_ASN1_SNMP_SNMPIMPL_H 1
+EOF
+
+ else
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_ASN1_SNMP_SNMPIMPL_H 1
+EOF
+
+ fi
+ echo $ac_n "checking for snmp_build_var_op in -lsnmp""... $ac_c" 1>&6
+echo "configure:8430: checking for snmp_build_var_op in -lsnmp" >&5
+
+ old_LIBS="$LIBS"
+ LIBS="$old_LIBS -lsnmp"
cat > conftest.$ac_ext <<EOF
-#line 4043 "configure"
+#line 8435 "configure"
#include "confdefs.h"
-#include <"${PG_INCLUDED_DIR}postgres.h">
+extern char snmp_build_var_op();
+int main() {
+ snmp_build_var_op()
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4048: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:8442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ SNMP_LIBS="-lsnmp"
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ SNMP_LIBS=
fi
rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_POSTGRES_H 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $HAVE_HEADER-LIBPQ-FE.H ; then
- PG_INCLUDE_DIR="$PG_INCLUDE_DIR"
- fi
- if test -d /usr/lib/pgsql ; then
- PGROOT="/usr/lib/pgsql"
- elif test -d /usr/lib/postgresql ; then
- PGROOT="/usr/lib/postgresql"
- fi
-fi
-
-if test "$PGROOT" && test "$PQ_LIBS" && test "$PG_INCLUDE_DIR" ; then
- echo Postgresql found in $PGROOT.
-fi
-
-
-
-
-
-echo $ac_n "checking for oci.h""... $ac_c" 1>&6
-echo "configure:4092: checking for oci.h" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 4095 "configure"
+ if test "x$SNMP_LIBS" = "x"; then
+ for try in /usr/lib /usr/local/lib /usr/local/snmp/lib $snmp_lib_dir; do
+ LIBS="$old_LIBS -L$try -lsnmp"
+ cat > conftest.$ac_ext <<EOF
+#line 8457 "configure"
#include "confdefs.h"
-#include <oci.h>
+extern char snmp_build_var_op();
int main() {
- int a = 1;
+ snmp_build_var_op()
; return 0; }
EOF
-if { (eval echo configure:4102: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ORACLE_INCLUDE=" "
+ SNMP_LIBS="-L$try -lsnmp"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ORACLE_INCLUDE=
+ SNMP_LIBS=
fi
rm -f conftest*
-
-if test "x$ORACLE_INCLUDE" = "x"; then
- old_CFLAGS="$CFLAGS"
-
-
-
-if test "x$LOCATE" != "x"; then
- DIRS=
- file=oci.h
-
- for x in `${LOCATE} $file 2>/dev/null`; do
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
-
- dir=`${DIRNAME} $x 2>/dev/null`
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
-
- already=`echo \$oracle_include_dir ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
-fi
-
-eval "oracle_include_dir=\"\$oracle_include_dir $DIRS\""
-
-
- for try in /usr/local/include/oracle /usr/local/oracle/include $oracle_include_dir; do
- CFLAGS="$old_CFLAGS -I$try"
- cat > conftest.$ac_ext <<EOF
-#line 4147 "configure"
+ if test "x$SNMP_LIBS" != "x"; then
+ break;
+ fi
+ LIBS="$old_LIBS -L$try -lsnmp -lcrypto"
+ cat > conftest.$ac_ext <<EOF
+#line 8479 "configure"
#include "confdefs.h"
-#include <oci.h>
+extern char snmp_build_var_op();
int main() {
- int a = 1;
+ snmp_build_var_op()
; return 0; }
EOF
-if { (eval echo configure:4154: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ORACLE_INCLUDE="-I$try"
+ SNMP_LIBS="-L$try -lsnmp -lcrypto"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ORACLE_INCLUDE=
+ SNMP_LIBS=
fi
rm -f conftest*
- if test "x$ORACLE_INCLUDE" != "x"; then
- break;
- fi
- done
- CFLAGS="$old_CFLAGS"
-fi
-
-if test "x$ORACLE_INCLUDE" = "x"; then
- echo "$ac_t""no" 1>&6
-else
- echo "$ac_t""yes" 1>&6
-
- echo $ac_n "checking for oracle_init in -loracleclient""... $ac_c" 1>&6
-echo "configure:4177: checking for oracle_init in -loracleclient" >&5
-
- old_LIBS="$LIBS"
-
-
-
-if test "x$LOCATE" != "x"; then
- DIRS=
- file=liboracleclient.so
+ if test "x$SNMP_LIBS" != "x"; then
+ break;
+ fi
+ done
+ fi
+ LIBS="$old_LIBS"
- for x in `${LOCATE} $file 2>/dev/null`; do
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
+ CFLAGS="$old_CFLAGS"
+ if test "x$SNMP_LIBS" = "x"; then
+ echo "$ac_t""no" 1>&6
+ SNMP_INCLUDE=
+ else
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define WITH_SNMP 1
+EOF
- dir=`${DIRNAME} $x 2>/dev/null`
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
+ cat >> confdefs.h <<\EOF
+#define HAVE_LIBSNMP 1
+EOF
- already=`echo \$oracle_lib_dir ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
+ fi
fi
-eval "oracle_lib_dir=\"\$oracle_lib_dir $DIRS\""
-
-
-
-if test "x$LOCATE" != "x"; then
- DIRS=
- file=liboracleclient.a
+fi
- for x in `${LOCATE} $file 2>/dev/null`; do
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
+gethostbyaddrrstyle=""
+echo $ac_n "checking gethostbyaddr_r() syntax""... $ac_c" 1>&6
+echo "configure:8524: checking gethostbyaddr_r() syntax" >&5
+case "$host" in
+*-freebsd*)
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYADDRRSTYLE BSDSTYLE
+EOF
- dir=`${DIRNAME} $x 2>/dev/null`
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
+ gethostbyaddrrstyle=BSD
+ echo "configure: warning: FreeBSD overridden to BSD-style" 1>&2
+ ;;
+esac
+if test "x$gethostbyaddrrstyle" = "x"; then
+ cat > conftest.$ac_ext <<EOF
+#line 8537 "configure"
+#include "confdefs.h"
- already=`echo \$oracle_lib_dir ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
-fi
+#include <stdio.h>
+#include <netdb.h>
-eval "oracle_lib_dir=\"\$oracle_lib_dir $DIRS\""
+int main() {
+ gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL, NULL)
+; return 0; }
+EOF
+if { (eval echo configure:8547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYADDRRSTYLE GNUSTYLE
+EOF
+ gethostbyaddrrstyle=GNU
- for try in /usr/lib/oracle /usr/local/lib/oracle /usr/local/oracle/lib $oracle_lib_dir; do
- LIBS="$old_LIBS -L$try -loracleclient"
- cat > conftest.$ac_ext <<EOF
-#line 4239 "configure"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+fi
+if test "x$gethostbyaddrrstyle" = "x"; then
+ cat > conftest.$ac_ext <<EOF
+#line 8564 "configure"
#include "confdefs.h"
-extern char oracle_init();
+
+#include <stdio.h>
+#include <netdb.h>
+
int main() {
- oracle_init()
+ gethostbyaddr_r(NULL, 0, 0, NULL, NULL, 0, NULL)
; return 0; }
EOF
-if { (eval echo configure:4246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ORACLE_LIBS="-L$try -loracleclient"
+
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYADDRRSTYLE SYSVSTYLE
+EOF
+
+ gethostbyaddrrstyle=SYSV
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ORACLE_LIBS=
fi
rm -f conftest*
- if test "x$ORACLE_LIBS" != "x"; then
- break;
- fi
- done
- LIBS="$old_LIBS"
+fi
+if test "x$gethostbyaddrrstyle" = "x"; then
+ cat > conftest.$ac_ext <<EOF
+#line 8591 "configure"
+#include "confdefs.h"
- if test "x$ORACLE_LIBS" = "x"; then
- echo "$ac_t""no" 1>&6
- ORACLE_INCLUDE=
- else
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_OCI_H 1
+#include <stdio.h>
+#include <netdb.h>
+
+int main() {
+ gethostbyaddr(NULL, 0, 0)
+; return 0; }
+EOF
+if { (eval echo configure:8601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYADDRRSTYLE BSDSTYLE
EOF
- fi
+ gethostbyaddrrstyle=BSD
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
fi
+if test "x$gethostbyaddrrstyle" = "x"; then
+ echo "$ac_t""none! It must not exist, here." 1>&6
+else
+ echo "$ac_t""${gethostbyaddrrstyle}-style" 1>&6
+fi
-
-
-
-echo $ac_n "checking for isql.h""... $ac_c" 1>&6
-echo "configure:4279: checking for isql.h" >&5
+if test "x$gethostbyaddrrstyle" = "xBSD"; then
+ echo "configure: warning: ****** BSD-style gethostbyaddr might NOT be thread-safe! ****** " 1>&2
+fi
+gethostbynamerstyle=""
+echo $ac_n "checking gethostbyname_r() syntax""... $ac_c" 1>&6
+echo "configure:8629: checking gethostbyname_r() syntax" >&5
cat > conftest.$ac_ext <<EOF
-#line 4282 "configure"
+#line 8631 "configure"
#include "confdefs.h"
-#include <isql.h>
+
+#include <stdio.h>
+#include <netdb.h>
+
int main() {
- int a = 1;
+ gethostbyname_r(NULL, NULL, NULL, 0, NULL, NULL)
; return 0; }
EOF
-if { (eval echo configure:4289: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ODBC_INCLUDE=" "
+
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYNAMERSTYLE GNUSTYLE
+EOF
+
+ gethostbynamerstyle=GNU
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ODBC_INCLUDE=
fi
rm -f conftest*
+if test "x$gethostbynamerstyle" = "x"; then
+ cat > conftest.$ac_ext <<EOF
+#line 8657 "configure"
+#include "confdefs.h"
-if test "x$ODBC_INCLUDE" = "x"; then
- old_CFLAGS="$CFLAGS"
+#include <stdio.h>
+#include <netdb.h>
+int main() {
+ gethostbyname_r(NULL, NULL, NULL, 0, NULL)
+; return 0; }
+EOF
+if { (eval echo configure:8667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYNAMERSTYLE SYSVSTYLE
+EOF
-if test "x$LOCATE" != "x"; then
- DIRS=
- file=isql.h
-
- for x in `${LOCATE} $file 2>/dev/null`; do
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
-
- dir=`${DIRNAME} $x 2>/dev/null`
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
-
- already=`echo \$odbc_include_dir ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
+ gethostbynamerstyle=SYSV
+
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
+rm -f conftest*
+fi
+if test "x$gethostbynamerstyle" = "x"; then
+ cat > conftest.$ac_ext <<EOF
+#line 8684 "configure"
+#include "confdefs.h"
-eval "odbc_include_dir=\"\$odbc_include_dir $DIRS\""
-
+#include <stdio.h>
+#include <netdb.h>
- for try in /usr/include /usr/local/include/odbc /usr/local/odbc/include $odbc_include_dir; do
- CFLAGS="$old_CFLAGS -I$try"
- cat > conftest.$ac_ext <<EOF
-#line 4334 "configure"
-#include "confdefs.h"
-#include <isql.h>
int main() {
- int a = 1;
+ gethostbyname(NULL)
; return 0; }
EOF
-if { (eval echo configure:4341: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ODBC_INCLUDE="-I$try"
+
+ cat >> confdefs.h <<\EOF
+#define GETHOSTBYNAMERSTYLE BSDSTYLE
+EOF
+
+ gethostbynamerstyle=BSD
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ODBC_INCLUDE=
fi
rm -f conftest*
- if test "x$ODBC_INCLUDE" != "x"; then
- break;
- fi
- done
- CFLAGS="$old_CFLAGS"
fi
-if test "x$ODBC_INCLUDE" = "x"; then
- echo "$ac_t""no" 1>&6
+if test "x$gethostbynamerstyle" = "x"; then
+ echo "$ac_t""none! It must not exist, here." 1>&6
else
- echo "$ac_t""yes" 1>&6
-
- echo $ac_n "checking for odbc_init in -lodbcclient""... $ac_c" 1>&6
-echo "configure:4364: checking for odbc_init in -lodbcclient" >&5
-
- old_LIBS="$LIBS"
-
-
-
-if test "x$LOCATE" != "x"; then
- DIRS=
- file=libodbcclient.so
-
- for x in `${LOCATE} $file 2>/dev/null`; do
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
-
- dir=`${DIRNAME} $x 2>/dev/null`
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
-
- already=`echo \$odbc_lib_dir ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
+ echo "$ac_t""${gethostbynamerstyle}-style" 1>&6
fi
-eval "odbc_lib_dir=\"\$odbc_lib_dir $DIRS\""
+if test "x$gethostbynamerstyle" = "xBSD"; then
+ echo "configure: warning: ****** BSD-style gethostbyname might NOT be thread-safe! ****** " 1>&2
+fi
-
+ctimerstyle=""
+echo $ac_n "checking ctime_r() syntax""... $ac_c" 1>&6
+echo "configure:8722: checking ctime_r() syntax" >&5
+cat > conftest.$ac_ext <<EOF
+#line 8724 "configure"
+#include "confdefs.h"
-if test "x$LOCATE" != "x"; then
- DIRS=
- file=libodbcclient.a
+#include <time.h>
- for x in `${LOCATE} $file 2>/dev/null`; do
- base=`echo $x | sed "s%/${file}%%"`
- if test "x$x" = "x$base"; then
- continue;
- fi
+int main() {
+ ctime_r(NULL, NULL, 0)
+; return 0; }
+EOF
+if { (eval echo configure:8733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+
+ cat >> confdefs.h <<\EOF
+#define CTIMERSTYLE SOLARISSTYLE
+EOF
- dir=`${DIRNAME} $x 2>/dev/null`
- exclude=`echo ${dir} | ${GREP} /home`
- if test "x$exclude" != "x"; then
- continue
- fi
+ ctimerstyle="SOLARIS"
- already=`echo \$odbc_lib_dir ${DIRS} | ${GREP} ${dir}`
- if test "x$already" = "x"; then
- DIRS="$DIRS $dir"
- fi
- done
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
+rm -f conftest*
+if test "x$ctimerstyle" = "x"; then
+ cat > conftest.$ac_ext <<EOF
+#line 8749 "configure"
+#include "confdefs.h"
-eval "odbc_lib_dir=\"\$odbc_lib_dir $DIRS\""
-
+#include <time.h>
- for try in /usr/lib /usr/lib/odbc /usr/local/lib/odbc /usr/local/odbc/lib $odbc_lib_dir; do
- LIBS="$old_LIBS -L$try -lodbcclient"
- cat > conftest.$ac_ext <<EOF
-#line 4426 "configure"
-#include "confdefs.h"
-extern char odbc_init();
int main() {
- odbc_init()
+ ctime_r(NULL, NULL)
; return 0; }
EOF
-if { (eval echo configure:4433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ODBC_LIBS="-L$try -lodbcclient"
+
+ cat >> confdefs.h <<\EOF
+#define CTIMERSTYLE POSIXSTYLE
+EOF
+
+ ctimerstyle="POSIX"
+
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ODBC_LIBS=
fi
rm -f conftest*
- if test "x$ODBC_LIBS" != "x"; then
- break;
- fi
- done
- LIBS="$old_LIBS"
+fi
- if test "x$ODBC_LIBS" = "x"; then
- echo "$ac_t""no" 1>&6
- ODBC_INCLUDE=
- else
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_ISQL_H 1
+if test "x$ctimerstyle" = "x"; then
+ echo "$ac_t""none! It must not exist, here." 1>&6
+else
+ echo "$ac_t""${ctimerstyle}-style" 1>&6
+fi
+
+
+if test x"$rad_enable_largefiles" = xyes ; then
+ echo $ac_n "checking for largefile linkage""... $ac_c" 1>&6
+echo "configure:8783: checking for largefile linkage" >&5
+ case "$host" in
+ *-aix4.01*)
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: AIX before 4.2 does not support large files" 1>&2; exit 1; }
+ ;;
+ *-aix4*)
+ echo "$ac_t""ok" 1>&6
+ LFS_CFLAGS="-D_LARGE_FILES"
+ LFS_LDFLAGS=""
+ LFS_LIBS=""
+ ;;
+ *-hpux*)
+ echo "$ac_t""ok" 1>&6
+ LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
+ LFS_LDFLAGS=""
+ LFS_LIBS=""
+ ;;
+ *-irix*)
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: Large files not supported on this platform" 1>&2; exit 1; }
+ ;;
+ *-linux*)
+ echo "$ac_t""maybe" 1>&6
+ LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
+ LFS_LDFLAGS=""
+ LFS_LIBS=""
+ cat >> confdefs.h <<\EOF
+#define _GNU_SOURCE 1
EOF
- fi
+ ;;
+ *-solaris*)
+ echo "$ac_t""ok" 1>&6
+ # Extract the first word of "getconf", so it can be a program name with args.
+set dummy getconf; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8820: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GETCONF'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GETCONF" in
+ /*)
+ ac_cv_path_GETCONF="$GETCONF" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GETCONF="$GETCONF" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GETCONF="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+GETCONF="$ac_cv_path_GETCONF"
+if test -n "$GETCONF"; then
+ echo "$ac_t""$GETCONF" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
+ if test -z "$GETCONF" ; then
+ { echo "configure: error: getconf required to configure large file support" 1>&2; exit 1; }
+ fi
+ LFS_CFLAGS=`$GETCONF LFS_CFLAGS`
+ LFS_LDFLAGS=`$GETCONF LFS_LDFLAGS`
+ LFS_LIBS=`$GETCONF LFS_LIBS`
+ ;;
+ *)
+ echo "$ac_t""maybe" 1>&6
+ LFS_CFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
+ LFS_LDFLAGS=""
+ LFS_LIBS=""
+ ;;
+ esac
+
+
+
+fi
-LIBTOOL="`pwd`/libtool"
-
top_builddir=`pwd`
+export top_builddir
+echo "$ac_t""top_builddir=$top_builddir" 1>&6
-if test "$WITH_THREAD_POOL" = "yes"; then
- if test "$WITH_THREADS" != "yes"; then
- { echo "configure: error: You must have threads enabled for thread pools to work." 1>&2; exit 1; }
- fi
- if test "X$PTHREADLIB" = "X"; then
- { echo "configure: error: You must have threading libraries for thread pools to work." 1>&2; exit 1; }
- fi
+if test "x$INCLTDL" != "x";then
+ INCLTDL='-I${top_builddir}/''libltdl'
+fi
- if test "$WITH_THREAD_POOL" = "yes"; then
- cat >> confdefs.h <<\EOF
-#define WITH_THREAD_POOL 1
-EOF
- fi
+
+mysubdirs=
+if test "x$EXPERIMENTAL" = "xyes"; then
+ bar=`ls -1 src/modules/rlm_*/configure | sed 's%/configure%%'`
+ mysubdirs=`echo $bar`
+else
+ for bar in `cat src/modules/stable`; do
+ if test -f src/modules/$bar/configure; then
+ mysubdirs="$mysubdirs src/modules/$bar"
+ fi
+ done
fi
+MODULES=
+if test "x$EXPERIMENTAL" = "xyes"; then
+ for foo in `ls -1 src/modules | grep rlm_`; do
+ MODULES="$MODULES $foo"
+ done
+else
+ for foo in `cat src/modules/stable`; do
+ MODULES="$MODULES $foo"
+ done
+fi
-mysubdirs=
-for foo in `find src/modules -name configure -print`; do
- bar=`echo $foo | sed 's%/configure$%%g'`
- mysubdirs="$mysubdirs $bar"
-done
+subdirs="'libltdl' $mysubdirs"
-subdirs="libltdl $mysubdirs"
+
+
export CFLAGS LIBS
trap '' 1 2 15
trap 'rm -fr `echo "\
./Make.inc \
./src/include/build-radpaths-h \
+ ./src/main/Makefile \
./src/main/checkrad.pl \
./src/main/radlast \
./src/main/radtest \
./scripts/check-radiusd-config \
./scripts/radiusd.cron.daily \
./scripts/radiusd.cron.monthly \
+ ./scripts/cryptpasswd \
+ ./raddb/dictionary \
./raddb/radiusd.conf
src/include/autoconf.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@RANLIB@%$RANLIB%g
+s%@abs_top_builddir@%$abs_top_builddir%g
s%@GMAKE@%$GMAKE%g
s%@MAKE@%$MAKE%g
+s%@subdirs@%$subdirs%g
+s%@LIBLTDLPATH@%$LIBLTDLPATH%g
+s%@LIBTOOL@%$LIBTOOL%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@LN_S@%$LN_S%g
-s%@LIBTOOL@%$LIBTOOL%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@ECHO@%$ECHO%g
+s%@STRIP@%$STRIP%g
s%@logdir@%$logdir%g
s%@radacctdir@%$radacctdir%g
s%@raddbdir@%$raddbdir%g
-s%@subdirs@%$subdirs%g
+s%@OPENSSL_INCLUDE@%$OPENSSL_INCLUDE%g
+s%@OPENSSL_LIBS@%$OPENSSL_LIBS%g
s%@PERL@%$PERL%g
s%@SNMPGET@%$SNMPGET%g
s%@SNMPWALK@%$SNMPWALK%g
s%@CRYPTLIB@%$CRYPTLIB%g
s%@SNMP_LIBS@%$SNMP_LIBS%g
s%@SNMP_INCLUDE@%$SNMP_INCLUDE%g
-s%@PGROOT@%$PGROOT%g
-s%@PQ_LIBS@%$PQ_LIBS%g
-s%@PG_INCLUDE_DIR@%$PG_INCLUDE_DIR%g
-s%@ORACLE_LIBS@%$ORACLE_LIBS%g
-s%@ORACLE_INCLUDE@%$ORACLE_INCLUDE%g
-s%@ODBC_LIBS@%$ODBC_LIBS%g
-s%@ODBC_INCLUDE@%$ODBC_INCLUDE%g
+s%@GETCONF@%$GETCONF%g
+s%@LFS_CFLAGS@%$LFS_CFLAGS%g
+s%@LFS_LDFLAGS@%$LFS_LDFLAGS%g
+s%@LFS_LIBS@%$LFS_LIBS%g
+s%@HOSTINFO@%$HOSTINFO%g
s%@LIBLTDL@%$LIBLTDL%g
s%@INCLTDL@%$INCLTDL%g
-s%@top_builddir@%$top_builddir%g
+s%@MODULES@%$MODULES%g
s%@INSTALLSTRIP@%$INSTALLSTRIP%g
s%@USE_SHARED_LIBS@%$USE_SHARED_LIBS%g
s%@USE_STATIC_LIBS@%$USE_STATIC_LIBS%g
s%@STATIC_MODULES@%$STATIC_MODULES%g
+s%@RADIUSD_MAJOR_VERSION@%$RADIUSD_MAJOR_VERSION%g
+s%@RADIUSD_MINOR_VERSION@%$RADIUSD_MINOR_VERSION%g
s%@RADIUSD_VERSION@%$RADIUSD_VERSION%g
CEOF
CONFIG_FILES=\${CONFIG_FILES-"\
./Make.inc \
./src/include/build-radpaths-h \
+ ./src/main/Makefile \
./src/main/checkrad.pl \
./src/main/radlast \
./src/main/radtest \
./scripts/check-radiusd-config \
./scripts/radiusd.cron.daily \
./scripts/radiusd.cron.monthly \
+ ./scripts/cryptpasswd \
+ ./raddb/dictionary \
./raddb/radiusd.conf
"}
EOF
esac
done
- for ac_config_dir in libltdl $mysubdirs; do
+ for ac_config_dir in 'libltdl' $mysubdirs; do
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
fi
fi
- cd $ac_popdir
+ cd "$ac_popdir"
done
fi
-
echo timestamp > src/include/stamp-h
(cd ./src/include && /bin/sh ./build-radpaths-h)
(cd ./src/main && chmod +x checkrad.pl radlast radtest)
-(cd ./scripts && chmod +x rc.radiusd radwatch check-radiusd-config radiusd.cron.daily radiusd.cron.monthly)
-
-cat >> src/include/autoconf.h <<EOF
-
-#define HOSTINFO "$host"
-#define RADIUSD_VERSION "$RADIUSD_VERSION"
-EOF
+(cd ./scripts && chmod +x rc.radiusd radwatch check-radiusd-config radiusd.cron.daily radiusd.cron.monthly cryptpasswd)
-
-host=$host
projects / freeradius.git / blobdiff