Add ignore_auth_resp control interface debug parameter

[mech_eap.git] / doc / dbus.doxygen

diff --git a/doc/dbus.doxygen b/doc/dbus.doxygen
index bd3e7f4..b0e67d4 100644 (file)
--- a/doc/dbus.doxygen
+++ b/doc/dbus.doxygen
@@ -456,6 +456,62 @@ fi.w1.wpa_supplicant1.CreateInterface.
        </dl>
       </li>
       <li>
+       <h3>VendorElemAdd ( i: frame_id, ay: ielems ) --> nothing</h3>
+       <p>Add Vendor Elements to corresponding frame ID.</p>
+       <h4>Arguments</h4>
+       <dl>
+         <dt>i : frame_id</dt>
+         <dd>Frame ID for which Vendor specific IE is to be added.</dd>
+         <dt>ay : ielems</dt>
+         <dd>Information Element(s).</dd>
+       </dl>
+       <h4>Possible errors</h4>
+       <dl>
+         <dt>fi.w1.wpa_supplicant1.InvalidArgs</dt>
+         <dd>The "ielems" argument is not a properly formatted or size mismatch.</dd>
+         <dt>fi.w1.wpa_supplicant1.NoMemory</dt>
+         <dd>Needed memory was not possible to get allocated.</dd>
+       </dl>
+      </li>
+      <li>
+       <h3>VendorElemGet ( i: frame_id ) --> ay: ielems</h3>
+       <p>Get Vendor Elements of corresponding frame ID.</p>
+       <h4>Arguments</h4>
+       <dl>
+         <dt>i : frame_id</dt>
+         <dd>Frame ID for which Vendor specific IE is being queried.</dd>
+         <dt>ay : ielems</dt>
+         <dd>Information Element(s).</dd>
+       </dl>
+       <h4>Possible errors</h4>
+       <dl>
+         <dt>fi.w1.wpa_supplicant1.InvalidArgs</dt>
+         <dd>The "frame_id" argument is not valid.</dd>
+       </dl>
+      </li>
+      <li>
+       <h3>VendorElemRem ( i: frame_id, ay: ielems ) --> nothing</h3>
+       <p>Remove Vendor Elements of corresponding frame ID.</p>
+       <h4>Arguments</h4>
+       <dl>
+         <dt>i : frame_id</dt>
+         <dd>Frame ID for which Vendor specific IE is to be removed.</dd>
+         <dt>ay : ielems</dt>
+         <dd>Information Element(s) OR * to remove all.</dd>
+       </dl>
+       <h4>Possible errors</h4>
+       <dl>
+         <dt>fi.w1.wpa_supplicant1.InvalidArgs</dt>
+         <dd>The "ielems" argument is not a properly formatted or size mismatch.</dd>
+         <dt>fi.w1.wpa_supplicant1.NoMemory</dt>
+         <dd>Needed memory was not possible to get allocated.</dd>
+       </dl>
+      </li>
+      <li>
+       <h3>SaveConfig ( ) --> nothing</h3>
+       <p>Save configuration to the configuration file.</p>
+      </li>
+      <li>
        <h3>EAPLogoff ( ) --> nothing</h3>
        <p>IEEE 802.1X EAPOL state machine logoff.</p>
       </li>
@@ -625,6 +681,11 @@ fi.w1.wpa_supplicant1.CreateInterface.
       </li>
 
       <li>
+       <h3>ConfigFile - s - (read)</h3>
+       <p>Configuration file path. Returns an empty string if no configuration file is in use.</p>
+      </li>
+
+      <li>
        <h3>CurrentBSS - o - (read)</h3>
        <p>Path to D-Bus object representing BSS which wpa_supplicant is associated with, or "/" if is not associated at all.</p>
       </li>
@@ -680,6 +741,11 @@ fi.w1.wpa_supplicant1.CreateInterface.
       </li>
 
       <li>
+       <h3>AssocStatusCode - i - (read)</h3>
+       <p>The most recent IEEE 802.11 status code for association rejection.</p>
+      </li>
+
+      <li>
        <h3>EapolVersion - s - (read/write)</h3>
        <p>IEEE 802.1X/EAPOL version number</p>
       </li>
@@ -1571,6 +1637,20 @@ Interface for performing P2P (Wi-Fi Peer-to-Peer) P2P Device operations.
   </li>
 
   <li>
+    <h3>DeviceFoundProperties ( o : path, a{sv} : properties )</h3>
+    <p>A new peer device has been found.</p>
+    <h4>Arguments</h4>
+    <dl>
+      <dt>o : path</dt>
+      <dd>A D-Bus path to an object representing the found peer device.</dd>
+    </dl>
+    <dl>
+      <dt>a{sv} : properties</dt>
+      <dd>A dictionary containing properties of the found peer device.</dd>
+    </dl>
+  </li>
+
+  <li>
     <h3>DeviceLost ( o : path )</h3>
   </li>