ChangeLog for hostapd
-????-??-?? - v0.6.6
+2015-09-27 - v2.5
+ * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
+ [http://w1.fi/security/2015-2/] (CVE-2015-4141)
+ * fixed WMM Action frame parser
+ [http://w1.fi/security/2015-3/] (CVE-2015-4142)
+ * fixed EAP-pwd server missing payload length validation
+ [http://w1.fi/security/2015-4/]
+ (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145)
+ * fixed validation of WPS and P2P NFC NDEF record payload length
+ [http://w1.fi/security/2015-5/]
+ * nl80211:
+ - fixed vendor command handling to check OUI properly
+ * fixed hlr_auc_gw build with OpenSSL
+ * hlr_auc_gw: allow Milenage RES length to be reduced
+ * disable HT for a station that does not support WMM/QoS
+ * added support for hashed password (NtHash) in EAP-pwd server
+ * fixed and extended dynamic VLAN cases
+ * added EAP-EKE server support for deriving Session-Id
+ * set Acct-Session-Id to a random value to make it more likely to be
+ unique even if the device does not have a proper clock
+ * added more 2.4 GHz channels for 20/40 MHz HT co-ex scan
+ * modified SAE routines to be more robust and PWE generation to be
+ stronger against timing attacks
+ * added support for Brainpool Elliptic Curves with SAE
+ * increases maximum value accepted for cwmin/cwmax
+ * added support for CCMP-256 and GCMP-256 as group ciphers with FT
+ * added Fast Session Transfer (FST) module
+ * removed optional fields from RSNE when using FT with PMF
+ (workaround for interoperability issues with iOS 8.4)
+ * added EAP server support for TLS session resumption
+ * fixed key derivation for Suite B 192-bit AKM (this breaks
+ compatibility with the earlier version)
+ * added mechanism to track unconnected stations and do minimal band
+ steering
+ * number of small fixes
+
+2015-03-15 - v2.4
+ * allow OpenSSL cipher configuration to be set for internal EAP server
+ (openssl_ciphers parameter)
+ * fixed number of small issues based on hwsim test case failures and
+ static analyzer reports
+ * fixed Accounting-Request to not include duplicated Acct-Session-Id
+ * add support for Acct-Multi-Session-Id in RADIUS Accounting messages
+ * add support for PMKSA caching with SAE
+ * add support for generating BSS Load element (bss_load_update_period)
+ * fixed channel switch from VHT to HT
+ * add INTERFACE-ENABLED and INTERFACE-DISABLED ctrl_iface events
+ * add support for learning STA IPv4/IPv6 addresses and configuring
+ ProxyARP support
+ * dropped support for the madwifi driver interface
+ * add support for Suite B (128-bit and 192-bit level) key management and
+ cipher suites
+ * fixed a regression with driver=wired
+ * extend EAPOL-Key msg 1/4 retry workaround for changing SNonce
+ * add BSS_TM_REQ ctrl_iface command to send BSS Transition Management
+ Request frames and BSS-TM-RESP event to indicate response to such
+ frame
+ * add support for EAP Re-Authentication Protocol (ERP)
+ * fixed AP IE in EAPOL-Key 3/4 when both WPA and FT was enabled
+ * fixed a regression in HT 20/40 coex Action frame parsing
+ * set stdout to be line-buffered
+ * add support for vendor specific VHT extension to enable 256 QAM rates
+ (VHT-MCS 8 and 9) on 2.4 GHz band
+ * RADIUS DAS:
+ - extend Disconnect-Request processing to allow matching of multiple
+ sessions
+ - support Acct-Multi-Session-Id as an identifier
+ - allow PMKSA cache entry to be removed without association
+ * expire hostapd STA entry if kernel does not have a matching entry
+ * allow chanlist to be used to specify a subset of channels for ACS
+ * improve ACS behavior on 2.4 GHz band and allow channel bias to be
+ configured with acs_chan_bias parameter
+ * do not reply to a Probe Request frame that includes DSS Parameter Set
+ element in which the channel does not match the current operating
+ channel
+ * add UPDATE_BEACON ctrl_iface command; this can be used to force Beacon
+ frame contents to be updated and to start beaconing on an interface
+ that used start_disabled=1
+ * fixed some RADIUS server failover cases
+
+2014-10-09 - v2.3
+ * fixed number of minor issues identified in static analyzer warnings
+ * fixed DFS and channel switch operation for multi-BSS cases
+ * started to use constant time comparison for various password and hash
+ values to reduce possibility of any externally measurable timing
+ differences
+ * extended explicit clearing of freed memory and expired keys to avoid
+ keeping private data in memory longer than necessary
+ * added support for number of new RADIUS attributes from RFC 7268
+ (Mobility-Domain-Id, WLAN-HESSID, WLAN-Pairwise-Cipher,
+ WLAN-Group-Cipher, WLAN-AKM-Suite, WLAN-Group-Mgmt-Pairwise-Cipher)
+ * fixed GET_CONFIG wpa_pairwise_cipher value
+ * added code to clear bridge FDB entry on station disconnection
+ * fixed PMKSA cache timeout from Session-Timeout for WPA/WPA2 cases
+ * fixed OKC PMKSA cache entry fetch to avoid a possible infinite loop
+ in case the first entry does not match
+ * fixed hostapd_cli action script execution to use more robust mechanism
+ (CVE-2014-3686)
+
+2014-06-04 - v2.2
+ * fixed SAE confirm-before-commit validation to avoid a potential
+ segmentation fault in an unexpected message sequence that could be
+ triggered remotely
+ * extended VHT support
+ - Operating Mode Notification
+ - Power Constraint element (local_pwr_constraint)
+ - Spectrum management capability (spectrum_mgmt_required=1)
+ - fix VHT80 segment picking in ACS
+ - fix vht_capab 'Maximum A-MPDU Length Exponent' handling
+ - fix VHT20
+ * fixed HT40 co-ex scan for some pri/sec channel switches
+ * extended HT40 co-ex support to allow dynamic channel width changes
+ during the lifetime of the BSS
+ * fixed HT40 co-ex support to check for overlapping 20 MHz BSS
+ * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
+ this fixes password with include UTF-8 characters that use
+ three-byte encoding EAP methods that use NtPasswordHash
+ * reverted TLS certificate validation step change in v2.1 that rejected
+ any AAA server certificate with id-kp-clientAuth even if
+ id-kp-serverAuth EKU was included
+ * fixed STA validation step for WPS ER commands to prevent a potential
+ crash if an ER sends an unexpected PutWLANResponse to a station that
+ is disassociated, but not fully removed
+ * enforce full EAP authentication after RADIUS Disconnect-Request by
+ removing the PMKSA cache entry
+ * added support for NAS-IP-Address, NAS-identifier, and NAS-IPv6-Address
+ in RADIUS Disconnect-Request
+ * added mechanism for removing addresses for MAC ACLs by prefixing an
+ entry with "-"
+ * Interworking/Hotspot 2.0 enhancements
+ - support Hotspot 2.0 Release 2
+ * OSEN network for online signup connection
+ * subscription remediation (based on RADIUS server request or
+ control interface HS20_WNM_NOTIF for testing purposes)
+ * Hotspot 2.0 release number indication in WFA RADIUS VSA
+ * deauthentication request (based on RADIUS server request or
+ control interface WNM_DEAUTH_REQ for testing purposes)
+ * Session Info URL RADIUS AVP to trigger ESS Disassociation Imminent
+ * hs20_icon config parameter to configure icon files for OSU
+ * osu_* config parameters for OSU Providers list
+ - do not use Interworking filtering rules on Probe Request if
+ Interworking is disabled to avoid interop issues
+ * added/fixed nl80211 functionality
+ - AP interface teardown optimization
+ - support vendor specific driver command
+ (VENDOR <vendor id> <sub command id> [<hex formatted data>])
+ * fixed PMF protection of Deauthentication frame when this is triggered
+ by session timeout
+ * internal TLS implementation enhancements/fixes
+ - add SHA256-based cipher suites
+ - add DHE-RSA cipher suites
+ - fix X.509 validation of PKCS#1 signature to check for extra data
+ * RADIUS server functionality
+ - add minimal RADIUS accounting server support (hostapd-as-server);
+ this is mainly to enable testing coverage with hwsim scripts
+ - allow authentication log to be written into SQLite databse
+ - added option for TLS protocol testing of an EAP peer by simulating
+ various misbehaviors/known attacks
+ - MAC ACL support for testing purposes
+ * fixed PTK derivation for CCMP-256 and GCMP-256
+ * extended WPS per-station PSK to support ER case
+ * added option to configure the management group cipher
+ (group_mgmt_cipher=AES-128-CMAC (default), BIP-GMAC-128, BIP-GMAC-256,
+ BIP-CMAC-256)
+ * fixed AP mode default TXOP Limit values for AC_VI and AC_VO (these
+ were rounded incorrectly)
+ * added support for postponing FT response in case PMK-R1 needs to be
+ pulled from R0KH
+ * added option to advertise 40 MHz intolerant HT capability with
+ ht_capab=[40-INTOLERANT]
+ * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled
+ whenever CONFIG_WPS=y is set
+ * EAP-pwd fixes
+ - fix possible segmentation fault on EAP method deinit if an invalid
+ group is negotiated
+ * fixed RADIUS client retransmit/failover behavior
+ - there was a potential ctash due to freed memory being accessed
+ - failover to a backup server mechanism did not work properly
+ * fixed a possible crash on double DISABLE command when multiple BSSes
+ are enabled
+ * fixed a memory leak in SAE random number generation
+ * fixed GTK rekeying when the station uses FT protocol
+ * fixed off-by-one bounds checking in printf_encode()
+ - this could result in deinial of service in some EAP server cases
+ * various bug fixes
+
+2014-02-04 - v2.1
+ * added support for simultaneous authentication of equals (SAE) for
+ stronger password-based authentication with WPA2-Personal
+ * added nl80211 functionality
+ - VHT configuration for nl80211
+ - support split wiphy dump
+ - driver-based MAC ACL
+ - QoS Mapping configuration
+ * added fully automated regression testing with mac80211_hwsim
+ * allow ctrl_iface group to be specified on command line (-G<group>)
+ * allow single hostapd process to control independent WPS interfaces
+ (wps_independent=1) instead of synchronized operations through all
+ configured interfaces within a process
+ * avoid processing received management frames multiple times when using
+ nl80211 with multiple BSSes
+ * added support for DFS (processing radar detection events, CAC, channel
+ re-selection)
+ * added EAP-EKE server
+ * added automatic channel selection (ACS)
+ * added option for using per-BSS (vif) configuration files with
+ -b<phyname>:<config file name>
+ * extended global control interface ADD/REMOVE commands to allow BSSes
+ of a radio to be removed individually without having to add/remove all
+ other BSSes of the radio at the same time
+ * added support for sending debug info to Linux tracing (-T on command
+ line)
+ * replace dump_file functionality with same information being available
+ through the hostapd control interface
+ * added support for using Protected Dual of Public Action frames for
+ GAS/ANQP exchanges when PMF is enabled
+ * added support for WPS+NFC updates
+ - improved protocol
+ - option to fetch and report alternative carrier records for external
+ NFC operations
+ * various bug fixes
+
+2013-01-12 - v2.0
+ * added AP-STA-DISCONNECTED ctrl_iface event
+ * improved debug logging (human readable event names, interface name
+ included in more entries)
+ * added number of small changes to make it easier for static analyzers
+ to understand the implementation
+ * added a workaround for Windows 7 Michael MIC failure reporting and
+ use of the Secure bit in EAPOL-Key msg 3/4
+ * fixed number of small bugs (see git logs for more details)
+ * changed OpenSSL to read full certificate chain from server_cert file
+ * nl80211: number of updates to use new cfg80211/nl80211 functionality
+ - replace monitor interface with nl80211 commands
+ - additional information for driver-based AP SME
+ * EAP-pwd:
+ - fix KDF for group 21 and zero-padding
+ - added support for fragmentation
+ - increased maximum number of hunting-and-pecking iterations
+ * avoid excessive Probe Response retries for broadcast Probe Request
+ frames (only with drivers using hostapd SME/MLME)
+ * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
+ * fixed WPS operation stopping on dual concurrent AP
+ * added wps_rf_bands configuration parameter for overriding RF Bands
+ value for WPS
+ * added support for getting per-device PSK from RADIUS Tunnel-Password
+ * added support for libnl 3.2 and newer
+ * increased initial group key handshake retransmit timeout to 500 ms
+ * added a workaround for 4-way handshake to update SNonce even after
+ having sent EAPOL-Key 3/4 to avoid issues with some supplicant
+ implementations that can change SNonce for each EAP-Key 2/4
+ * added a workaround for EAPOL-Key 4/4 using incorrect type value in
+ WPA2 mode (some deployed stations use WPA type in that message)
+ * added a WPS workaround for mixed mode AP Settings with Windows 7
+ * changed WPS AP PIN disabling mechanism to disable the PIN after 10
+ consecutive failures in addition to using the exponential lockout
+ period
+ * added support for WFA Hotspot 2.0
+ - GAS/ANQP advertisement of network information
+ - disable_dgaf parameter to disable downstream group-addressed
+ forwarding
+ * simplified licensing terms by selecting the BSD license as the only
+ alternative
+ * EAP-SIM: fixed re-authentication not to update pseudonym
+ * EAP-SIM: use Notification round before EAP-Failure
+ * EAP-AKA: added support for AT_COUNTER_TOO_SMALL
+ * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
+ * EAP-AKA': fixed identity for MK derivation
+ * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
+ breaks interoperability with older versions
+ * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
+ * changed ANonce to be a random number instead of Counter-based
+ * added support for canceling WPS operations with hostapd_cli wps_cancel
+ * fixed EAP/WPS to PSK transition on reassociation in cases where
+ deauthentication is missed
+ * hlr_auc_gw enhancements:
+ - a new command line parameter -u can be used to enable updating of
+ SQN in Milenage file
+ - use 5 bit IND for SQN updates
+ - SQLite database can now be used to store Milenage information
+ * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
+ and reauth data
+ * added support for Chargeable-User-Identity (RFC 4372)
+ * added radius_auth_req_attr and radius_acct_req_attr configuration
+ parameters to allow adding/overriding of RADIUS attributes in
+ Access-Request and Accounting-Request packets
+ * added support for RADIUS dynamic authorization server (RFC 5176)
+ * added initial support for WNM operations
+ - BSS max idle period
+ - WNM-Sleep Mode
+ * added new WPS NFC ctrl_iface mechanism
+ - removed obsoleted WPS_OOB command (including support for deprecated
+ UFD config_method)
+ * added FT support for drivers that implement MLME internally
+ * added SA Query support for drivers that implement MLME internally
+ * removed default ACM=1 from AC_VO and AC_VI
+ * changed VENDOR-TEST EAP method to use proper private enterprise number
+ (this will not interoperate with older versions)
+ * added hostapd.conf parameter vendor_elements to allow arbitrary vendor
+ specific elements to be added to the Beacon and Probe Response frames
+ * added support for configuring GCMP cipher for IEEE 802.11ad
+ * added support for 256-bit AES with internal TLS implementation
+ * changed EAPOL transmission to use AC_VO if WMM is active
+ * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
+ correctly; invalid messages could have caused the hostapd process to
+ terminate before this fix [CVE-2012-4445]
+ * limit number of active wildcard PINs for WPS Registrar to one to avoid
+ confusing behavior with multiple wildcard PINs
+ * added a workaround for WPS PBC session overlap detection to avoid
+ interop issues with deployed station implementations that do not
+ remove active PBC indication from Probe Request frames properly
+ * added support for using SQLite for the eap_user database
+ * added Acct-Session-Id attribute into Access-Request messages
+ * fixed EAPOL frame transmission to non-QoS STAs with nl80211
+ (do not send QoS frames if the STA did not negotiate use of QoS for
+ this association)
+
+2012-05-10 - v1.0
+ * Add channel selection support in hostapd. See hostapd.conf.
+ * Add support for IEEE 802.11v Time Advertisement mechanism with UTC
+ TSF offset. See hostapd.conf for config info.
+ * Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
+ This allows the driver to use PS buffering of Deauthentication and
+ Disassociation frames when the STA is in power save sleep. Only
+ available with drivers that provide TX status events for Deauth/
+ Disassoc frames (nl80211).
+ * Allow PMKSA caching to be disabled on the Authenticator. See
+ hostap.conf config parameter disable_pmksa_caching.
+ * atheros: Add support for IEEE 802.11w configuration.
+ * bsd: Add support for setting HT values in IFM_MMASK.
+ * Allow client isolation to be configured with ap_isolate. Client
+ isolation can be used to prevent low-level bridging of frames
+ between associated stations in the BSS. By default, this bridging
+ is allowed.
+ * Allow coexistance of HT BSSes with WEP/TKIP BSSes.
+ * Add require_ht config parameter, which can be used to configure
+ hostapd to reject association with any station that does not support
+ HT PHY.
+ * Add support for writing debug log to a file using "-f" option. Also
+ add relog CLI command to re-open the log file.
+ * Add bridge handling for WDS STA interfaces. By default they are
+ added to the configured bridge of the AP interface (if present),
+ but the user can also specify a separate bridge using cli command
+ wds_bridge.
+ * hostapd_cli:
+ - Add wds_bridge command for specifying bridge for WDS STA
+ interfaces.
+ - Add relog command for reopening log file.
+ - Send AP-STA-DISCONNECTED event when an AP disconnects a station
+ due to inactivity.
+ - Add wps_config ctrl_interface command for configuring AP. This
+ command can be used to configure the AP using the internal WPS
+ registrar. It works in the same way as new AP settings received
+ from an ER.
+ - Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
+ - Add command get version, that returns hostapd version string.
+ * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
+ Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
+ notification to the STA.
+ * Allow AP mode to disconnect STAs based on low ACK condition (when
+ the data connection is not working properly, e.g., due to the STA
+ going outside the range of the AP). Disabled by default, enable by
+ config option disassoc_low_ack.
+ * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
+ config file.
+ * WPS:
+ - Send AP Settings as a wrapped Credential attribute to ctrl_iface
+ in WPS-NEW-AP-SETTINGS.
+ - Dispatch more WPS events through hostapd ctrl_iface.
+ - Add mechanism for indicating non-standard WPS errors.
+ - Change concurrent radio AP to use only one WPS UPnP instance.
+ - Add wps_check_pin command for processing PIN from user input.
+ UIs can use this command to process a PIN entered by a user and to
+ validate the checksum digit (if present).
+ - Add hostap_cli get_config command to display current AP config.
+ - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
+ runtime and support dynamic AP PIN management.
+ - Disable AP PIN after 10 consecutive failures. Slow down attacks
+ on failures up to 10.
+ - Allow AP to start in Enrollee mode without AP PIN for probing,
+ to be compatible with Windows 7.
+ - Add Config Error into WPS-FAIL events to provide more info
+ to the user on how to resolve the issue.
+ - When controlling multiple interfaces:
+ - apply WPS commands to all interfaces configured to use WPS
+ - apply WPS config changes to all interfaces that use WPS
+ - when an attack is detected on any interface, disable AP PIN on
+ all interfaces
+ * WPS ER:
+ - Show SetSelectedRegistrar events as ctrl_iface events.
+ - Add special AP Setup Locked mode to allow read only ER.
+ ap_setup_locked=2 can now be used to enable a special mode where
+ WPS ER can learn the current AP settings, but cannot change them.
+ * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
+ - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
+ for testing protocol extensibility.
+ - Add build option CONFIG_WPS_STRICT to allow disabling of WPS
+ workarounds.
+ - Add support for AuthorizedMACs attribute.
+ * TDLS:
+ - Allow TDLS use or TDLS channel switching in the BSS to be
+ prohibited in the BSS, using config params tdls_prohibit and
+ tdls_prohibit_chan_switch.
+ * EAP server: Add support for configuring fragment size (see
+ fragment_size in hostapd.conf).
+ * wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
+ wlantest can be used to capture frames from a monitor interface
+ for realtime capturing or from pcap files for offline analysis.
+ * Interworking: Support added for 802.11u. Enable in .config with
+ CONFIG_INTERWORKING. See hostapd.conf for config parameters for
+ interworking.
+ * Android: Add build and runtime support for Android hostapd.
+ * Add a new debug message level for excessive information. Use
+ -ddd to enable.
+ * TLS: Add support for tls_disable_time_checks=1 in client mode.
+ * Internal TLS:
+ - Add support for TLS v1.1 (RFC 4346). Enable with build parameter
+ CONFIG_TLSV11.
+ - Add domainComponent parser for X.509 names
+ * Reorder some IEs to get closer to IEEE 802.11 standard. Move
+ WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
+ Move HT IEs to be later in (Re)Assoc Resp.
+ * Many bugfixes.
+
+2010-04-18 - v0.7.2
+ * fix WPS internal Registrar use when an external Registrar is also
+ active
+ * bsd: Cleaned up driver wrapper and added various low-level
+ configuration options
+ * TNC: fixed issues with fragmentation
+ * EAP-TNC: add Flags field into fragment acknowledgement (needed to
+ interoperate with other implementations; may potentially breaks
+ compatibility with older wpa_supplicant/hostapd versions)
+ * cleaned up driver wrapper API for multi-BSS operations
+ * nl80211: fix multi-BSS and VLAN operations
+ * fix number of issues with IEEE 802.11r/FT; this version is not
+ backwards compatible with old versions
+ * add SA Query Request processing in AP mode (IEEE 802.11w)
+ * fix IGTK PN in group rekeying (IEEE 802.11w)
+ * fix WPS PBC session overlap detection to use correct attribute
+ * hostapd_notif_Assoc() can now be called with all IEs to simplify
+ driver wrappers
+ * work around interoperability issue with some WPS External Registrar
+ implementations
+ * nl80211: fix WPS IE update
+ * hostapd_cli: add support for action script operations (run a script
+ on hostapd events)
+ * fix DH padding with internal crypto code (mainly, for WPS)
+ * fix WPS association with both WPS IE and WPA/RSN IE present with
+ driver wrappers that use hostapd MLME (e.g., nl80211)
+
+2010-01-16 - v0.7.1
+ * cleaned up driver wrapper API (struct wpa_driver_ops); the new API
+ is not fully backwards compatible, so out-of-tree driver wrappers
+ will need modifications
+ * cleaned up various module interfaces
+ * merge hostapd and wpa_supplicant developers' documentation into a
+ single document
+ * fixed HT Capabilities IE with nl80211 drivers
+ * moved generic AP functionality code into src/ap
+ * WPS: handle Selected Registrar as union of info from all Registrars
+ * remove obsolte Prism54.org driver wrapper
+ * added internal debugging mechanism with backtrace support and memory
+ allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
+ * EAP-FAST server: piggyback Phase 2 start with the end of Phase 1
+ * WPS: add support for dynamically selecting whether to provision the
+ PSK as an ASCII passphrase or PSK
+ * added support for WDS (4-address frame) mode with per-station virtual
+ interfaces (wds_sta=1 in config file; only supported with
+ driver=nl80211 for now)
+ * fixed WPS Probe Request processing to handle missing required
+ attribute
+ * fixed PKCS#12 use with OpenSSL 1.0.0
+ * detect bridge interface automatically so that bridge parameter in
+ hostapd.conf becomes optional (though, it may now be used to
+ automatically add then WLAN interface into a bridge with
+ driver=nl80211)
+
+2009-11-21 - v0.7.0
+ * increased hostapd_cli ping interval to 5 seconds and made this
+ configurable with a new command line options (-G<seconds>)
+ * driver_nl80211: use Linux socket filter to improve performance
+ * added support for external Registrars with WPS (UPnP transport)
+ * 802.11n: scan for overlapping BSSes before starting 20/40 MHz channel
+ * driver_nl80211: fixed STA accounting data collection (TX/RX bytes
+ reported correctly; TX/RX packets not yet available from kernel)
+ * added support for WPS USBA out-of-band mechanism with USB Flash
+ Drives (UFD) (CONFIG_WPS_UFD=y)
+ * fixed EAPOL/EAP reauthentication when using an external RADIUS
+ authentication server
+ * fixed TNC with EAP-TTLS
+ * fixed IEEE 802.11r key derivation function to match with the standard
+ (note: this breaks interoperability with previous version) [Bug 303]
+ * fixed SHA-256 based key derivation function to match with the
+ standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
+ (note: this breaks interoperability with previous version) [Bug 307]
+ * added number of code size optimizations to remove unnecessary
+ functionality from the program binary based on build configuration
+ (part of this automatic; part configurable with CONFIG_NO_* build
+ options)
+ * use shared driver wrapper files with wpa_supplicant
+ * driver_nl80211: multiple updates to provide support for new Linux
+ nl80211/mac80211 functionality
+ * updated management frame protection to use IEEE Std 802.11w-2009
+ * fixed number of small WPS issues and added workarounds to
+ interoperate with common deployed broken implementations
+ * added some IEEE 802.11n co-existence rules to disable 40 MHz channels
+ or modify primary/secondary channels if needed based on neighboring
+ networks
+ * added support for NFC out-of-band mechanism with WPS
+ * added preliminary support for IEEE 802.11r RIC processing
+
+2009-01-06 - v0.6.7
+ * added support for Wi-Fi Protected Setup (WPS)
+ (hostapd can now be configured to act as an integrated WPS Registrar
+ and provision credentials for WPS Enrollees using PIN and PBC
+ methods; external wireless Registrar can configure the AP, but
+ external WLAN Manager Registrars are not supported); WPS support can
+ be enabled by adding CONFIG_WPS=y into .config and setting the
+ runtime configuration variables in hostapd.conf (see WPS section in
+ the example configuration file); new hostapd_cli commands wps_pin and
+ wps_pbc are used to configure WPS negotiation; see README-WPS for
+ more details
+ * added IEEE 802.11n HT capability configuration (ht_capab)
+ * added support for generating Country IE based on nl80211 regulatory
+ information (added if ieee80211d=1 in configuration)
+ * fixed WEP authentication (both Open System and Shared Key) with
+ mac80211
+ * added support for EAP-AKA' (draft-arkko-eap-aka-kdf)
+ * added support for using driver_test over UDP socket
+ * changed EAP-GPSK to use the IANA assigned EAP method type 51
+ * updated management frame protection to use IEEE 802.11w/D7.0
+ * fixed retransmission of EAP requests if no response is received
+
+2008-11-23 - v0.6.6
* added a new configuration option, wpa_ptk_rekey, that can be used to
enforce frequent PTK rekeying, e.g., to mitigate some attacks against
TKIP deficiencies
+ * updated OpenSSL code for EAP-FAST to use an updated version of the
+ session ticket overriding API that was included into the upstream
+ OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
+ needed with that version anymore)
+ * changed channel flags configuration to read the information from
+ the driver (e.g., via driver_nl80211 when using mac80211) instead of
+ using hostapd as the source of the regulatory information (i.e.,
+ information from CRDA is now used with mac80211); this allows 5 GHz
+ channels to be used with hostapd (if allowed in the current
+ regulatory domain)
+ * fixed EAP-TLS message processing for the last TLS message if it is
+ large enough to require fragmentation (e.g., if a large Session
+ Ticket data is included)
+ * fixed listen interval configuration for nl80211 drivers
2008-11-01 - v0.6.5
* added support for SHA-256 as X.509 certificate digest when using the