Extend the range of values for the RTS threshold

[mech_eap.git] / hostapd / hostapd.conf

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index b444ed4..5f4220d 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -192,10 +192,10 @@ dtim_period=2
 # (default: 2007)
 max_num_sta=255
 
-# RTS/CTS threshold; 2347 = disabled (default); range 0..2347
+# RTS/CTS threshold; -1 = disabled (default); range -1..65535
 # If this field is not included in hostapd.conf, hostapd will not control
 # RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it.
-rts_threshold=2347
+rts_threshold=-1
 
 # Fragmentation threshold; 2346 = disabled (default); range 256..2346
 # If this field is not included in hostapd.conf, hostapd will not control
@@ -267,6 +267,13 @@ auth_algs=3
 #     requests for broadcast SSID
 ignore_broadcast_ssid=0
 
+# Do not reply to broadcast Probe Request frames from unassociated STA if there
+# is no room for additional stations (max_num_sta). This can be used to
+# discourage a STA from trying to associate with this AP if the association
+# would be rejected due to maximum STA limit.
+# Default: 0 (disabled)
+#no_probe_resp_if_max_sta=0
+
 # Additional vendor specific elements for Beacon and Probe Response frames
 # This parameter can be used to add additional vendor specific element(s) into
 # the end of the Beacon and Probe Response frames. The format for these
@@ -1684,6 +1691,17 @@ own_ip_addr=127.0.0.1
 # username/password
 #nai_realm=0,example.org,13[5:6],21[2:4][5:7]
 
+# Arbitrary ANQP-element configuration
+# Additional ANQP-elements with arbitrary values can be defined by specifying
+# their contents in raw format as a hexdump of the payload. Note that these
+# values will override ANQP-element contents that may have been specified in the
+# more higher layer configuration parameters listed above.
+# format: anqp_elem=<InfoID>:<hexdump of payload>
+# For example, AP Geospatial Location ANQP-element with unknown location:
+#anqp_elem=265:0000
+# For example, AP Civic Location ANQP-element with unknown location:
+#anqp_elem=266:000000
+
 # QoS Map Set configuration
 #
 # Comma delimited QoS Map Set in decimal values