hostapd: Remove unused bridge_packets configuration option

[libeap.git] / hostapd / hostapd.conf

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index aeaad2e..66e31c9 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -342,30 +342,6 @@ wmm_ac_vo_acm=0
 # default: 300 (i.e., 5 minutes)
 #ap_max_inactivity=300
 
-# Enable/disable internal bridge for packets between associated stations.
-#
-# When IEEE 802.11 is used in managed mode, packets are usually send through
-# the AP even if they are from a wireless station to another wireless station.
-# This functionality requires that the AP has a bridge functionality that sends
-# frames back to the same interface if their destination is another associated
-# station. In addition, broadcast/multicast frames from wireless stations will
-# be sent both to the host system net stack (e.g., to eventually wired network)
-# and back to the wireless interface.
-#
-# The internal bridge is implemented within the wireless kernel module and it
-# bypasses kernel filtering (netfilter/iptables/ebtables). If direct
-# communication between the stations needs to be prevented, the internal
-# bridge can be disabled by setting bridge_packets=0.
-#
-# Note: If this variable is not included in hostapd.conf, hostapd does not
-# change the configuration and iwpriv can be used to set the value with
-# 'iwpriv wlan# param 10 0' command. If the variable is in hostapd.conf,
-# hostapd will override possible iwpriv configuration whenever configuration
-# file is reloaded.
-#
-# default: do not control from hostapd (80211.o defaults to 1=enabled)
-#bridge_packets=1
-
 # Maximum allowed Listen Interval (how many Beacon periods STAs are allowed to
 # remain asleep). Default: 65535 (no limit apart from field size)
 #max_listen_interval=100