WPS UPnP: Throttle WLANEvent notifications to 5 per second

[libeap.git] / hostapd / hostapd.conf

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index e948c20..85b80b2 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -913,12 +913,17 @@ own_ip_addr=127.0.0.1
 # Config Methods
 # List of the supported configuration methods
 # Available methods: usba ethernet label display ext_nfc_token int_nfc_token
-#      nfc_interface push_button keypad
-#config_methods=label display push_button keypad
+#      nfc_interface push_button keypad virtual_display physical_display
+#      virtual_push_button physical_push_button
+#config_methods=label virtual_display virtual_push_button keypad
 
-# Access point PIN for initial configuration and adding Registrars
+# Static access point PIN for initial configuration and adding Registrars
 # If not set, hostapd will not allow external WPS Registrars to control the
-# access point.
+# access point. The AP PIN can also be set at runtime with hostapd_cli
+# wps_ap_pin command. Use of temporary (enabled by user action) and random
+# AP PIN is much more secure than configuring a static AP PIN here. As such,
+# use of the ap_pin parameter is not recommended if the AP device has means for
+# displaying a random PIN.
 #ap_pin=12345670
 
 # Skip building of automatic WPS credential
@@ -980,6 +985,14 @@ own_ip_addr=127.0.0.1
 # 12-digit, all-numeric code that identifies the consumer package.
 #upc=123456789012
 
+##### Wi-Fi Direct (P2P) ######################################################
+
+# Enable P2P Device management
+#manage_p2p=1
+
+# Allow cross connection
+#allow_cross_connection=1
+
 ##### Multiple BSSID support ##################################################
 #
 # Above configuration is using the default interface (wlan#, or multi-SSID VLAN