WPS: Limit Probe Request event queuing if subscriber may have left

[libeap.git] / hostapd / hostapd.conf

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index e7b5eab..85b80b2 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -283,6 +283,10 @@ ignore_broadcast_ssid=0
 #
 wmm_enabled=1
 #
+# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
+# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
+#uapsd_advertisement_enabled=1
+#
 # Low priority / AC_BK = background
 wmm_ac_bk_cwmin=4
 wmm_ac_bk_cwmax=10
@@ -500,6 +504,9 @@ eap_server=0
 # "openssl dhparam -out /etc/hostapd.dh.pem 1024"
 #dh_file=/etc/hostapd.dh.pem
 
+# Fragment size for EAP methods
+#fragment_size=1400
+
 # Configuration data for EAP-SIM database/authentication gateway interface.
 # This is a text string in implementation specific format. The example
 # implementation in eap_sim_db.c uses this as the UNIX domain socket name for
@@ -802,7 +809,7 @@ own_ip_addr=127.0.0.1
 # And so on.. One line per R0KH.
 
 # List of R1KHs in the same Mobility Domain
-# format: <MAC address> <R0KH-ID> <128-bit key as hex string>
+# format: <MAC address> <R1KH-ID> <128-bit key as hex string>
 # This list is used to map R1KH-ID to a destination MAC address when sending
 # PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD
 # that can request PMK-R1 keys.
@@ -906,12 +913,17 @@ own_ip_addr=127.0.0.1
 # Config Methods
 # List of the supported configuration methods
 # Available methods: usba ethernet label display ext_nfc_token int_nfc_token
-#      nfc_interface push_button keypad
-#config_methods=label display push_button keypad
+#      nfc_interface push_button keypad virtual_display physical_display
+#      virtual_push_button physical_push_button
+#config_methods=label virtual_display virtual_push_button keypad
 
-# Access point PIN for initial configuration and adding Registrars
+# Static access point PIN for initial configuration and adding Registrars
 # If not set, hostapd will not allow external WPS Registrars to control the
-# access point.
+# access point. The AP PIN can also be set at runtime with hostapd_cli
+# wps_ap_pin command. Use of temporary (enabled by user action) and random
+# AP PIN is much more secure than configuring a static AP PIN here. As such,
+# use of the ap_pin parameter is not recommended if the AP device has means for
+# displaying a random PIN.
 #ap_pin=12345670
 
 # Skip building of automatic WPS credential
@@ -973,6 +985,14 @@ own_ip_addr=127.0.0.1
 # 12-digit, all-numeric code that identifies the consumer package.
 #upc=123456789012
 
+##### Wi-Fi Direct (P2P) ######################################################
+
+# Enable P2P Device management
+#manage_p2p=1
+
+# Allow cross connection
+#allow_cross_connection=1
+
 ##### Multiple BSSID support ##################################################
 #
 # Above configuration is using the default interface (wlan#, or multi-SSID VLAN