Blacklist correct BSSID on authentication timeout

[mech_eap.git] / hostapd / hostapd.conf

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index a310c05..fa9a855 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -685,6 +685,13 @@ wmm_ac_vo_acm=0
 #
 #vht_oper_centr_freq_seg1_idx=159
 
+# Workaround to use station's nsts capability in (Re)Association Response frame
+# This may be needed with some deployed devices as an interoperability
+# workaround for beamforming if the AP's capability is greater than the
+# station's capability. This is disabled by default and can be enabled by
+# setting use_sta_nsts=1.
+#use_sta_nsts=0
+
 ##### IEEE 802.1X-2004 related configuration ##################################
 
 # Require IEEE 802.1X authorization
@@ -1909,6 +1916,16 @@ own_ip_addr=127.0.0.1
 # Enable neighbor report via radio measurements
 #rrm_neighbor_report=1
 
+# Publish fine timing measurement (FTM) responder functionality
+# This parameter only controls publishing via Extended Capabilities element.
+# Actual functionality is managed outside hostapd.
+#ftm_responder=0
+
+# Publish fine timing measurement (FTM) initiator functionality
+# This parameter only controls publishing via Extended Capabilities element.
+# Actual functionality is managed outside hostapd.
+#ftm_initiator=0
+
 ##### TESTING OPTIONS #########################################################
 #
 # The options in this section are only available when the build configuration