remove @EAP_LDFLAGS@, no longer exists
[mech_eap.orig] / libeap / src / ap / ieee802_11_ht.c
diff --git a/libeap/src/ap/ieee802_11_ht.c b/libeap/src/ap/ieee802_11_ht.c
new file mode 100644 (file)
index 0000000..7541b83
--- /dev/null
@@ -0,0 +1,270 @@
+/*
+ * hostapd / IEEE 802.11n HT
+ * Copyright (c) 2002-2009, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2007-2008, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Alternatively, this software may be distributed under the terms of BSD
+ * license.
+ *
+ * See README and COPYING for more details.
+ */
+
+#include "utils/includes.h"
+
+#include "utils/common.h"
+#include "common/ieee802_11_defs.h"
+#include "drivers/driver.h"
+#include "hostapd.h"
+#include "ap_config.h"
+#include "sta_info.h"
+#include "beacon.h"
+#include "ieee802_11.h"
+
+
+u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid)
+{
+       struct ieee80211_ht_capabilities *cap;
+       u8 *pos = eid;
+
+       if (!hapd->iconf->ieee80211n || !hapd->iface->current_mode)
+               return eid;
+
+       *pos++ = WLAN_EID_HT_CAP;
+       *pos++ = sizeof(*cap);
+
+       cap = (struct ieee80211_ht_capabilities *) pos;
+       os_memset(cap, 0, sizeof(*cap));
+       cap->ht_capabilities_info = host_to_le16(hapd->iconf->ht_capab);
+       cap->a_mpdu_params = hapd->iface->current_mode->a_mpdu_params;
+       os_memcpy(cap->supported_mcs_set, hapd->iface->current_mode->mcs_set,
+                 16);
+
+       /* TODO: ht_extended_capabilities (now fully disabled) */
+       /* TODO: tx_bf_capability_info (now fully disabled) */
+       /* TODO: asel_capabilities (now fully disabled) */
+
+       pos += sizeof(*cap);
+
+       return pos;
+}
+
+
+u8 * hostapd_eid_ht_operation(struct hostapd_data *hapd, u8 *eid)
+{
+       struct ieee80211_ht_operation *oper;
+       u8 *pos = eid;
+
+       if (!hapd->iconf->ieee80211n)
+               return eid;
+
+       *pos++ = WLAN_EID_HT_OPERATION;
+       *pos++ = sizeof(*oper);
+
+       oper = (struct ieee80211_ht_operation *) pos;
+       os_memset(oper, 0, sizeof(*oper));
+
+       oper->control_chan = hapd->iconf->channel;
+       oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode);
+       if (hapd->iconf->secondary_channel == 1)
+               oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE |
+                       HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
+       if (hapd->iconf->secondary_channel == -1)
+               oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW |
+                       HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH;
+
+       pos += sizeof(*oper);
+
+       return pos;
+}
+
+
+/*
+op_mode
+Set to 0 (HT pure) under the followign conditions
+       - all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
+       - all STAs in the BSS are 20 MHz HT in 20 MHz BSS
+Set to 1 (HT non-member protection) if there may be non-HT STAs
+       in both the primary and the secondary channel
+Set to 2 if only HT STAs are associated in BSS,
+       however and at least one 20 MHz HT STA is associated
+Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
+       (currently non-GF HT station is considered as non-HT STA also)
+*/
+int hostapd_ht_operation_update(struct hostapd_iface *iface)
+{
+       u16 cur_op_mode, new_op_mode;
+       int op_mode_changes = 0;
+
+       if (!iface->conf->ieee80211n || iface->conf->ht_op_mode_fixed)
+               return 0;
+
+       wpa_printf(MSG_DEBUG, "%s current operation mode=0x%X",
+                  __func__, iface->ht_op_mode);
+
+       if (!(iface->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT)
+           && iface->num_sta_ht_no_gf) {
+               iface->ht_op_mode |=
+                       HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT;
+               op_mode_changes++;
+       } else if ((iface->ht_op_mode &
+                   HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT) &&
+                  iface->num_sta_ht_no_gf == 0) {
+               iface->ht_op_mode &=
+                       ~HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT;
+               op_mode_changes++;
+       }
+
+       if (!(iface->ht_op_mode & HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT) &&
+           (iface->num_sta_no_ht || iface->olbc_ht)) {
+               iface->ht_op_mode |= HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT;
+               op_mode_changes++;
+       } else if ((iface->ht_op_mode &
+                   HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT) &&
+                  (iface->num_sta_no_ht == 0 && !iface->olbc_ht)) {
+               iface->ht_op_mode &=
+                       ~HT_INFO_OPERATION_MODE_NON_HT_STA_PRESENT;
+               op_mode_changes++;
+       }
+
+       /* Note: currently we switch to the MIXED op mode if HT non-greenfield
+        * station is associated. Probably it's a theoretical case, since
+        * it looks like all known HT STAs support greenfield.
+        */
+       new_op_mode = 0;
+       if (iface->num_sta_no_ht ||
+           (iface->ht_op_mode & HT_INFO_OPERATION_MODE_NON_GF_DEVS_PRESENT))
+               new_op_mode = OP_MODE_MIXED;
+       else if ((iface->conf->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET)
+                && iface->num_sta_ht_20mhz)
+               new_op_mode = OP_MODE_20MHZ_HT_STA_ASSOCED;
+       else if (iface->olbc_ht)
+               new_op_mode = OP_MODE_MAY_BE_LEGACY_STAS;
+       else
+               new_op_mode = OP_MODE_PURE;
+
+       cur_op_mode = iface->ht_op_mode & HT_INFO_OPERATION_MODE_OP_MODE_MASK;
+       if (cur_op_mode != new_op_mode) {
+               iface->ht_op_mode &= ~HT_INFO_OPERATION_MODE_OP_MODE_MASK;
+               iface->ht_op_mode |= new_op_mode;
+               op_mode_changes++;
+       }
+
+       wpa_printf(MSG_DEBUG, "%s new operation mode=0x%X changes=%d",
+                  __func__, iface->ht_op_mode, op_mode_changes);
+
+       return op_mode_changes;
+}
+
+
+u16 copy_sta_ht_capab(struct sta_info *sta, const u8 *ht_capab,
+                     size_t ht_capab_len)
+{
+       if (!ht_capab ||
+           ht_capab_len < sizeof(struct ieee80211_ht_capabilities)) {
+               sta->flags &= ~WLAN_STA_HT;
+               os_free(sta->ht_capabilities);
+               sta->ht_capabilities = NULL;
+               return WLAN_STATUS_SUCCESS;
+       }
+
+       if (sta->ht_capabilities == NULL) {
+               sta->ht_capabilities =
+                       os_zalloc(sizeof(struct ieee80211_ht_capabilities));
+               if (sta->ht_capabilities == NULL)
+                       return WLAN_STATUS_UNSPECIFIED_FAILURE;
+       }
+
+       sta->flags |= WLAN_STA_HT;
+       os_memcpy(sta->ht_capabilities, ht_capab,
+                 sizeof(struct ieee80211_ht_capabilities));
+
+       return WLAN_STATUS_SUCCESS;
+}
+
+
+static void update_sta_ht(struct hostapd_data *hapd, struct sta_info *sta)
+{
+       u16 ht_capab;
+
+       ht_capab = le_to_host16(sta->ht_capabilities->ht_capabilities_info);
+       wpa_printf(MSG_DEBUG, "HT: STA " MACSTR " HT Capabilities Info: "
+                  "0x%04x", MAC2STR(sta->addr), ht_capab);
+       if ((ht_capab & HT_CAP_INFO_GREEN_FIELD) == 0) {
+               if (!sta->no_ht_gf_set) {
+                       sta->no_ht_gf_set = 1;
+                       hapd->iface->num_sta_ht_no_gf++;
+               }
+               wpa_printf(MSG_DEBUG, "%s STA " MACSTR " - no greenfield, num "
+                          "of non-gf stations %d",
+                          __func__, MAC2STR(sta->addr),
+                          hapd->iface->num_sta_ht_no_gf);
+       }
+       if ((ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET) == 0) {
+               if (!sta->ht_20mhz_set) {
+                       sta->ht_20mhz_set = 1;
+                       hapd->iface->num_sta_ht_20mhz++;
+               }
+               wpa_printf(MSG_DEBUG, "%s STA " MACSTR " - 20 MHz HT, num of "
+                          "20MHz HT STAs %d",
+                          __func__, MAC2STR(sta->addr),
+                          hapd->iface->num_sta_ht_20mhz);
+       }
+}
+
+
+static void update_sta_no_ht(struct hostapd_data *hapd, struct sta_info *sta)
+{
+       if (!sta->no_ht_set) {
+               sta->no_ht_set = 1;
+               hapd->iface->num_sta_no_ht++;
+       }
+       if (hapd->iconf->ieee80211n) {
+               wpa_printf(MSG_DEBUG, "%s STA " MACSTR " - no HT, num of "
+                          "non-HT stations %d",
+                          __func__, MAC2STR(sta->addr),
+                          hapd->iface->num_sta_no_ht);
+       }
+}
+
+
+void update_ht_state(struct hostapd_data *hapd, struct sta_info *sta)
+{
+       if ((sta->flags & WLAN_STA_HT) && sta->ht_capabilities)
+               update_sta_ht(hapd, sta);
+       else
+               update_sta_no_ht(hapd, sta);
+
+       if (hostapd_ht_operation_update(hapd->iface) > 0)
+               ieee802_11_set_beacons(hapd->iface);
+}
+
+
+void hostapd_get_ht_capab(struct hostapd_data *hapd,
+                         struct ieee80211_ht_capabilities *ht_cap,
+                         struct ieee80211_ht_capabilities *neg_ht_cap)
+{
+       u16 cap;
+
+       if (ht_cap == NULL)
+               return;
+       os_memcpy(neg_ht_cap, ht_cap, sizeof(*neg_ht_cap));
+       cap = le_to_host16(neg_ht_cap->ht_capabilities_info);
+       cap &= hapd->iconf->ht_capab;
+       cap |= (hapd->iconf->ht_capab & HT_CAP_INFO_SMPS_DISABLED);
+
+       /*
+        * STBC needs to be handled specially
+        * if we don't support RX STBC, mask out TX STBC in the STA's HT caps
+        * if we don't support TX STBC, mask out RX STBC in the STA's HT caps
+        */
+       if (!(hapd->iconf->ht_capab & HT_CAP_INFO_RX_STBC_MASK))
+               cap &= ~HT_CAP_INFO_TX_STBC;
+       if (!(hapd->iconf->ht_capab & HT_CAP_INFO_TX_STBC))
+               cap &= ~HT_CAP_INFO_RX_STBC_MASK;
+
+       neg_ht_cap->ht_capabilities_info = host_to_le16(cap);
+}