--- /dev/null
+/*
+ * Wi-Fi Direct - P2P module
+ * Copyright (c) 2009-2010, Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Alternatively, this software may be distributed under the terms of BSD
+ * license.
+ *
+ * See README and COPYING for more details.
+ */
+
+#ifndef P2P_H
+#define P2P_H
+
+/**
+ * P2P_MAX_REG_CLASSES - Maximum number of regulatory classes
+ */
+#define P2P_MAX_REG_CLASSES 10
+
+/**
+ * P2P_MAX_REG_CLASS_CHANNELS - Maximum number of channels per regulatory class
+ */
+#define P2P_MAX_REG_CLASS_CHANNELS 20
+
+/**
+ * struct p2p_channels - List of supported channels
+ */
+struct p2p_channels {
+ /**
+ * struct p2p_reg_class - Supported regulatory class
+ */
+ struct p2p_reg_class {
+ /**
+ * reg_class - Regulatory class (IEEE 802.11-2007, Annex J)
+ */
+ u8 reg_class;
+
+ /**
+ * channel - Supported channels
+ */
+ u8 channel[P2P_MAX_REG_CLASS_CHANNELS];
+
+ /**
+ * channels - Number of channel entries in use
+ */
+ size_t channels;
+ } reg_class[P2P_MAX_REG_CLASSES];
+
+ /**
+ * reg_classes - Number of reg_class entries in use
+ */
+ size_t reg_classes;
+};
+
+enum p2p_wps_method {
+ WPS_NOT_READY, WPS_PIN_LABEL, WPS_PIN_DISPLAY, WPS_PIN_KEYPAD, WPS_PBC
+};
+
+/**
+ * struct p2p_go_neg_results - P2P Group Owner Negotiation results
+ */
+struct p2p_go_neg_results {
+ /**
+ * status - Negotiation result (Status Code)
+ *
+ * 0 (P2P_SC_SUCCESS) indicates success. Non-zero values indicate
+ * failed negotiation.
+ */
+ int status;
+
+ /**
+ * role_go - Whether local end is Group Owner
+ */
+ int role_go;
+
+ /**
+ * freq - Frequency of the group operational channel in MHz
+ */
+ int freq;
+
+ /**
+ * ssid - SSID of the group
+ */
+ u8 ssid[32];
+
+ /**
+ * ssid_len - Length of SSID in octets
+ */
+ size_t ssid_len;
+
+ /**
+ * passphrase - WPA2-Personal passphrase for the group (GO only)
+ */
+ char passphrase[64];
+
+ /**
+ * peer_device_addr - P2P Device Address of the peer
+ */
+ u8 peer_device_addr[ETH_ALEN];
+
+ /**
+ * peer_interface_addr - P2P Interface Address of the peer
+ */
+ u8 peer_interface_addr[ETH_ALEN];
+
+ /**
+ * wps_method - WPS method to be used during provisioning
+ */
+ enum p2p_wps_method wps_method;
+
+#define P2P_MAX_CHANNELS 50
+
+ /**
+ * freq_list - Zero-terminated list of possible operational channels
+ */
+ int freq_list[P2P_MAX_CHANNELS];
+
+ /**
+ * persistent_group - Whether the group should be made persistent
+ */
+ int persistent_group;
+
+ /**
+ * peer_config_timeout - Peer configuration timeout (in 10 msec units)
+ */
+ unsigned int peer_config_timeout;
+};
+
+struct p2p_data;
+
+enum p2p_scan_type {
+ P2P_SCAN_SOCIAL,
+ P2P_SCAN_FULL,
+ P2P_SCAN_SPECIFIC,
+ P2P_SCAN_SOCIAL_PLUS_ONE
+};
+
+/**
+ * struct p2p_config - P2P configuration
+ *
+ * This configuration is provided to the P2P module during initialization with
+ * p2p_init().
+ */
+struct p2p_config {
+ /**
+ * country - Country code to use in P2P operations
+ */
+ char country[3];
+
+ /**
+ * reg_class - Regulatory class for own listen channel
+ */
+ u8 reg_class;
+
+ /**
+ * channel - Own listen channel
+ */
+ u8 channel;
+
+ /**
+ * Regulatory class for own operational channel
+ */
+ u8 op_reg_class;
+
+ /**
+ * op_channel - Own operational channel
+ */
+ u8 op_channel;
+
+ /**
+ * channels - Own supported regulatory classes and channels
+ *
+ * List of supposerted channels per regulatory class. The regulatory
+ * classes are defined in IEEE Std 802.11-2007 Annex J and the
+ * numbering of the clases depends on the configured country code.
+ */
+ struct p2p_channels channels;
+
+ /**
+ * pri_dev_type - Primary Device Type (see WPS)
+ */
+ u8 pri_dev_type[8];
+
+ /**
+ * P2P_SEC_DEVICE_TYPES - Maximum number of secondary device types
+ */
+#define P2P_SEC_DEVICE_TYPES 5
+
+ /**
+ * sec_dev_type - Optional secondary device types
+ */
+ u8 sec_dev_type[P2P_SEC_DEVICE_TYPES][8];
+
+ /**
+ * dev_addr - P2P Device Address
+ */
+ u8 dev_addr[ETH_ALEN];
+
+ /**
+ * dev_name - Device Name
+ */
+ char *dev_name;
+
+ /**
+ * num_sec_dev_types - Number of sec_dev_type entries
+ */
+ size_t num_sec_dev_types;
+
+ /**
+ * concurrent_operations - Whether concurrent operations are supported
+ */
+ int concurrent_operations;
+
+ /**
+ * max_peers - Maximum number of discovered peers to remember
+ *
+ * If more peers are discovered, older entries will be removed to make
+ * room for the new ones.
+ */
+ size_t max_peers;
+
+ /**
+ * p2p_intra_bss - Intra BSS communication is supported
+ */
+ int p2p_intra_bss;
+
+ /**
+ * ssid_postfix - Postfix data to add to the SSID
+ *
+ * This data will be added to the end of the SSID after the
+ * DIRECT-<random two octets> prefix.
+ */
+ u8 ssid_postfix[32 - 9];
+
+ /**
+ * ssid_postfix_len - Length of the ssid_postfix data
+ */
+ size_t ssid_postfix_len;
+
+ /**
+ * msg_ctx - Context to use with wpa_msg() calls
+ */
+ void *msg_ctx;
+
+ /**
+ * cb_ctx - Context to use with callback functions
+ */
+ void *cb_ctx;
+
+
+ /* Callbacks to request lower layer driver operations */
+
+ /**
+ * p2p_scan - Request a P2P scan/search
+ * @ctx: Callback context from cb_ctx
+ * @type: Scan type
+ * @freq: Specific frequency (MHz) to scan or 0 for no restriction
+ * Returns: 0 on success, -1 on failure
+ *
+ * This callback function is used to request a P2P scan or search
+ * operation to be completed. Type type argument specifies which type
+ * of scan is to be done. @P2P_SCAN_SOCIAL indicates that only the
+ * social channels (1, 6, 11) should be scanned. @P2P_SCAN_FULL
+ * indicates that all channels are to be scanned. @P2P_SCAN_SPECIFIC
+ * request a scan of a single channel specified by freq.
+ * @P2P_SCAN_SOCIAL_PLUS_ONE request scan of all the social channels
+ * plus one extra channel specified by freq.
+ *
+ * The full scan is used for the initial scan to find group owners from
+ * all. The other types are used during search phase scan of the social
+ * channels (with potential variation if the Listen channel of the
+ * target peer is known or if other channels are scanned in steps).
+ *
+ * The scan results are returned after this call by calling
+ * p2p_scan_res_handler() for each scan result that has a P2P IE and
+ * then calling p2p_scan_res_handled() to indicate that all scan
+ * results have been indicated.
+ */
+ int (*p2p_scan)(void *ctx, enum p2p_scan_type type, int freq);
+
+ /**
+ * send_probe_resp - Transmit a Probe Response frame
+ * @ctx: Callback context from cb_ctx
+ * @buf: Probe Response frame (including the header and body)
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function is used to reply to Probe Request frames that were
+ * indicated with a call to p2p_probe_req_rx(). The response is to be
+ * sent on the same channel or to be dropped if the driver is not
+ * anymore listening to Probe Request frames.
+ *
+ * Alternatively, the responsibility for building the Probe Response
+ * frames in Listen state may be in another system component in which
+ * case this function need to be implemented (i.e., the function
+ * pointer can be %NULL). The WPS and P2P IEs to be added for Probe
+ * Response frames in such a case are available from the
+ * start_listen() callback. It should be noted that the received Probe
+ * Request frames must be indicated by calling p2p_probe_req_rx() even
+ * if this send_probe_resp() is not used.
+ */
+ int (*send_probe_resp)(void *ctx, const struct wpabuf *buf);
+
+ /**
+ * send_action - Transmit an Action frame
+ * @ctx: Callback context from cb_ctx
+ * @freq: Frequency in MHz for the channel on which to transmit
+ * @dst: Destination MAC address (Address 1)
+ * @src: Source MAC address (Address 2)
+ * @bssid: BSSID (Address 3)
+ * @buf: Frame body (starting from Category field)
+ * @len: Length of buf in octets
+ * @wait_time: How many msec to wait for a response frame
+ * Returns: 0 on success, -1 on failure
+ *
+ * The Action frame may not be transmitted immediately and the status
+ * of the transmission must be reported by calling
+ * p2p_send_action_cb() once the frame has either been transmitted or
+ * it has been dropped due to excessive retries or other failure to
+ * transmit.
+ */
+ int (*send_action)(void *ctx, unsigned int freq, const u8 *dst,
+ const u8 *src, const u8 *bssid, const u8 *buf,
+ size_t len, unsigned int wait_time);
+
+ /**
+ * send_action_done - Notify that Action frame sequence was completed
+ * @ctx: Callback context from cb_ctx
+ *
+ * This function is called when the Action frame sequence that was
+ * started with send_action() has been completed, i.e., when there is
+ * no need to wait for a response from the destination peer anymore.
+ */
+ void (*send_action_done)(void *ctx);
+
+ /**
+ * start_listen - Start Listen state
+ * @ctx: Callback context from cb_ctx
+ * @freq: Frequency of the listen channel in MHz
+ * @duration: Duration for the Listen state in milliseconds
+ * @probe_resp_ie: IE(s) to be added to Probe Response frames
+ * Returns: 0 on success, -1 on failure
+ *
+ * This Listen state may not start immediately since the driver may
+ * have other pending operations to complete first. Once the Listen
+ * state has started, p2p_listen_cb() must be called to notify the P2P
+ * module. Once the Listen state is stopped, p2p_listen_end() must be
+ * called to notify the P2P module that the driver is not in the Listen
+ * state anymore.
+ *
+ * If the send_probe_resp() is not used for generating the response,
+ * the IEs from probe_resp_ie need to be added to the end of the Probe
+ * Response frame body. If send_probe_resp() is used, the probe_resp_ie
+ * information can be ignored.
+ */
+ int (*start_listen)(void *ctx, unsigned int freq,
+ unsigned int duration,
+ const struct wpabuf *probe_resp_ie);
+ /**
+ * stop_listen - Stop Listen state
+ * @ctx: Callback context from cb_ctx
+ *
+ * This callback can be used to stop a Listen state operation that was
+ * previously requested with start_listen().
+ */
+ void (*stop_listen)(void *ctx);
+
+ /**
+ * get_noa - Get current Notice of Absence attribute payload
+ * @ctx: Callback context from cb_ctx
+ * @interface_addr: P2P Interface Address of the GO
+ * @buf: Buffer for returning NoA
+ * @buf_len: Buffer length in octets
+ * Returns: Number of octets used in buf, 0 to indicate no NoA is being
+ * advertized, or -1 on failure
+ *
+ * This function is used to fetch the current Notice of Absence
+ * attribute value from GO.
+ */
+ int (*get_noa)(void *ctx, const u8 *interface_addr, u8 *buf,
+ size_t buf_len);
+
+ /* Callbacks to notify events to upper layer management entity */
+
+ /**
+ * dev_found - Notification of a found P2P Device
+ * @ctx: Callback context from cb_ctx
+ * @addr: Source address of the message triggering this notification
+ * @dev_addr: P2P Device Address of the found P2P Device
+ * @pri_dev_type: Primary Device Type
+ * @dev_name: Device Name
+ * @config_methods: Configuration Methods
+ * @dev_capab: Device Capabilities
+ * @group_capab: Group Capabilities
+ *
+ * This callback is used to notify that a new P2P Device has been
+ * found. This may happen, e.g., during Search state based on scan
+ * results or during Listen state based on receive Probe Request and
+ * Group Owner Negotiation Request.
+ */
+ void (*dev_found)(void *ctx, const u8 *addr, const u8 *dev_addr,
+ const u8 *pri_dev_type, const char *dev_name,
+ u16 config_methods, u8 dev_capab, u8 group_capab);
+
+ /**
+ * go_neg_req_rx - Notification of a receive GO Negotiation Request
+ * @ctx: Callback context from cb_ctx
+ * @src: Source address of the message triggering this notification
+ * @dev_passwd_id: WPS Device Password ID
+ *
+ * This callback is used to notify that a P2P Device is requesting
+ * group owner negotiation with us, but we do not have all the
+ * necessary information to start GO Negotiation. This indicates that
+ * the local user has not authorized the connection yet by providing a
+ * PIN or PBC button press. This information can be provided with a
+ * call to p2p_connect().
+ */
+ void (*go_neg_req_rx)(void *ctx, const u8 *src, u16 dev_passwd_id);
+
+ /**
+ * go_neg_completed - Notification of GO Negotiation results
+ * @ctx: Callback context from cb_ctx
+ * @res: GO Negotiation results
+ *
+ * This callback is used to notify that Group Owner Negotiation has
+ * been completed. Non-zero struct p2p_go_neg_results::status indicates
+ * failed negotiation. In case of success, this function is responsible
+ * for creating a new group interface (or using the existing interface
+ * depending on driver features), setting up the group interface in
+ * proper mode based on struct p2p_go_neg_results::role_go and
+ * initializing WPS provisioning either as a Registrar (if GO) or as an
+ * Enrollee. Successful WPS provisioning must be indicated by calling
+ * p2p_wps_success_cb(). The callee is responsible for timing out group
+ * formation if WPS provisioning cannot be completed successfully
+ * within 15 seconds.
+ */
+ void (*go_neg_completed)(void *ctx, struct p2p_go_neg_results *res);
+
+ /**
+ * sd_request - Callback on Service Discovery Request
+ * @ctx: Callback context from cb_ctx
+ * @freq: Frequency (in MHz) of the channel
+ * @sa: Source address of the request
+ * @dialog_token: Dialog token
+ * @update_indic: Service Update Indicator from the source of request
+ * @tlvs: P2P Service Request TLV(s)
+ * @tlvs_len: Length of tlvs buffer in octets
+ *
+ * This callback is used to indicate reception of a service discovery
+ * request. Response to the query must be indicated by calling
+ * p2p_sd_response() with the context information from the arguments to
+ * this callback function.
+ *
+ * This callback handler can be set to %NULL to indicate that service
+ * discovery is not supported.
+ */
+ void (*sd_request)(void *ctx, int freq, const u8 *sa, u8 dialog_token,
+ u16 update_indic, const u8 *tlvs, size_t tlvs_len);
+
+ /**
+ * sd_response - Callback on Service Discovery Response
+ * @ctx: Callback context from cb_ctx
+ * @sa: Source address of the request
+ * @update_indic: Service Update Indicator from the source of response
+ * @tlvs: P2P Service Response TLV(s)
+ * @tlvs_len: Length of tlvs buffer in octets
+ *
+ * This callback is used to indicate reception of a service discovery
+ * response. This callback handler can be set to %NULL if no service
+ * discovery requests are used. The information provided with this call
+ * is replies to the queries scheduled with p2p_sd_request().
+ */
+ void (*sd_response)(void *ctx, const u8 *sa, u16 update_indic,
+ const u8 *tlvs, size_t tlvs_len);
+
+ /**
+ * prov_disc_req - Callback on Provisiong Discovery Request
+ * @ctx: Callback context from cb_ctx
+ * @peer: Source address of the request
+ * @config_methods: Requested WPS Config Method
+ * @dev_addr: P2P Device Address of the found P2P Device
+ * @pri_dev_type: Primary Device Type
+ * @dev_name: Device Name
+ * @supp_config_methods: Supported configuration Methods
+ * @dev_capab: Device Capabilities
+ * @group_capab: Group Capabilities
+ *
+ * This callback is used to indicate reception of a Provision Discovery
+ * Request frame that the P2P module accepted.
+ */
+ void (*prov_disc_req)(void *ctx, const u8 *peer, u16 config_methods,
+ const u8 *dev_addr, const u8 *pri_dev_type,
+ const char *dev_name, u16 supp_config_methods,
+ u8 dev_capab, u8 group_capab);
+
+ /**
+ * prov_disc_resp - Callback on Provisiong Discovery Response
+ * @ctx: Callback context from cb_ctx
+ * @peer: Source address of the response
+ * @config_methods: Value from p2p_prov_disc_req() or 0 on failure
+ *
+ * This callback is used to indicate reception of a Provision Discovery
+ * Response frame for a pending request scheduled with
+ * p2p_prov_disc_req(). This callback handler can be set to %NULL if
+ * provision discovery is not used.
+ */
+ void (*prov_disc_resp)(void *ctx, const u8 *peer, u16 config_methods);
+
+ /**
+ * invitation_process - Optional callback for processing Invitations
+ * @ctx: Callback context from cb_ctx
+ * @sa: Source address of the Invitation Request
+ * @bssid: P2P Group BSSID from the request or %NULL if not included
+ * @go_dev_addr: GO Device Address from P2P Group ID
+ * @ssid: SSID from P2P Group ID
+ * @ssid_len: Length of ssid buffer in octets
+ * @go: Variable for returning whether the local end is GO in the group
+ * @group_bssid: Buffer for returning P2P Group BSSID (if local end GO)
+ * @force_freq: Variable for returning forced frequency for the group
+ * @persistent_group: Whether this is an invitation to reinvoke a
+ * persistent group (instead of invitation to join an active
+ * group)
+ * Returns: Status code (P2P_SC_*)
+ *
+ * This optional callback can be used to implement persistent reconnect
+ * by allowing automatic restarting of persistent groups without user
+ * interaction. If this callback is not implemented (i.e., is %NULL),
+ * the received Invitation Request frames are replied with
+ * %P2P_SC_REQ_RECEIVED status and indicated to upper layer with the
+ * invitation_result() callback.
+ *
+ * If the requested parameters are acceptable and the group is known,
+ * %P2P_SC_SUCCESS may be returned. If the requested group is unknown,
+ * %P2P_SC_FAIL_UNKNOWN_GROUP should be returned. %P2P_SC_REQ_RECEIVED
+ * can be returned if there is not enough data to provide immediate
+ * response, i.e., if some sort of user interaction is needed. The
+ * invitation_received() callback will be called in that case
+ * immediately after this call.
+ */
+ u8 (*invitation_process)(void *ctx, const u8 *sa, const u8 *bssid,
+ const u8 *go_dev_addr, const u8 *ssid,
+ size_t ssid_len, int *go, u8 *group_bssid,
+ int *force_freq, int persistent_group);
+
+ /**
+ * invitation_received - Callback on Invitation Request RX
+ * @ctx: Callback context from cb_ctx
+ * @sa: Source address of the Invitation Request
+ * @bssid: P2P Group BSSID or %NULL if not received
+ * @ssid: SSID of the group
+ * @ssid_len: Length of ssid in octets
+ * @go_dev_addr: GO Device Address
+ * @status: Response Status
+ * @op_freq: Operational frequency for the group
+ *
+ * This callback is used to indicate sending of an Invitation Response
+ * for a received Invitation Request. If status == 0 (success), the
+ * upper layer code is responsible for starting the group. status == 1
+ * indicates need to get user authorization for the group. Other status
+ * values indicate that the invitation request was rejected.
+ */
+ void (*invitation_received)(void *ctx, const u8 *sa, const u8 *bssid,
+ const u8 *ssid, size_t ssid_len,
+ const u8 *go_dev_addr, u8 status,
+ int op_freq);
+
+ /**
+ * invitation_result - Callback on Invitation result
+ * @ctx: Callback context from cb_ctx
+ * @status: Negotiation result (Status Code)
+ * @bssid: P2P Group BSSID or %NULL if not received
+ *
+ * This callback is used to indicate result of an Invitation procedure
+ * started with a call to p2p_invite(). The indicated status code is
+ * the value received from the peer in Invitation Response with 0
+ * (P2P_SC_SUCCESS) indicating success or -1 to indicate a timeout or a
+ * local failure in transmitting the Invitation Request.
+ */
+ void (*invitation_result)(void *ctx, int status, const u8 *bssid);
+};
+
+
+/* P2P module initialization/deinitialization */
+
+/**
+ * p2p_init - Initialize P2P module
+ * @cfg: P2P module configuration
+ * Returns: Pointer to private data or %NULL on failure
+ *
+ * This function is used to initialize global P2P module context (one per
+ * device). The P2P module will keep a copy of the configuration data, so the
+ * caller does not need to maintain this structure. However, the callback
+ * functions and the context parameters to them must be kept available until
+ * the P2P module is deinitialized with p2p_deinit().
+ */
+struct p2p_data * p2p_init(const struct p2p_config *cfg);
+
+/**
+ * p2p_deinit - Deinitialize P2P module
+ * @p2p: P2P module context from p2p_init()
+ */
+void p2p_deinit(struct p2p_data *p2p);
+
+/**
+ * p2p_flush - Flush P2P module state
+ * @p2p: P2P module context from p2p_init()
+ *
+ * This command removes the P2P module state like peer device entries.
+ */
+void p2p_flush(struct p2p_data *p2p);
+
+/**
+ * p2p_set_dev_name - Set device name
+ * @p2p: P2P module context from p2p_init()
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function can be used to update the P2P module configuration with
+ * information that was not available at the time of the p2p_init() call.
+ */
+int p2p_set_dev_name(struct p2p_data *p2p, const char *dev_name);
+
+/**
+ * p2p_set_pri_dev_type - Set primary device type
+ * @p2p: P2P module context from p2p_init()
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function can be used to update the P2P module configuration with
+ * information that was not available at the time of the p2p_init() call.
+ */
+int p2p_set_pri_dev_type(struct p2p_data *p2p, const u8 *pri_dev_type);
+
+/**
+ * p2p_set_sec_dev_types - Set secondary device types
+ * @p2p: P2P module context from p2p_init()
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function can be used to update the P2P module configuration with
+ * information that was not available at the time of the p2p_init() call.
+ */
+int p2p_set_sec_dev_types(struct p2p_data *p2p, const u8 dev_types[][8],
+ size_t num_dev_types);
+
+int p2p_set_country(struct p2p_data *p2p, const char *country);
+
+
+/* Commands from upper layer management entity */
+
+enum p2p_discovery_type {
+ P2P_FIND_START_WITH_FULL,
+ P2P_FIND_ONLY_SOCIAL,
+ P2P_FIND_PROGRESSIVE
+};
+
+/**
+ * p2p_find - Start P2P Find (Device Discovery)
+ * @p2p: P2P module context from p2p_init()
+ * @timeout: Timeout for find operation in seconds or 0 for no timeout
+ * @type: Device Discovery type
+ * Returns: 0 on success, -1 on failure
+ */
+int p2p_find(struct p2p_data *p2p, unsigned int timeout,
+ enum p2p_discovery_type type);
+
+/**
+ * p2p_stop_find - Stop P2P Find (Device Discovery)
+ * @p2p: P2P module context from p2p_init()
+ */
+void p2p_stop_find(struct p2p_data *p2p);
+
+/**
+ * p2p_listen - Start P2P Listen state for specified duration
+ * @p2p: P2P module context from p2p_init()
+ * @timeout: Listen state duration in milliseconds
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function can be used to request the P2P module to keep the device
+ * discoverable on the listen channel for an extended set of time. At least in
+ * its current form, this is mainly used for testing purposes and may not be of
+ * much use for normal P2P operations.
+ */
+int p2p_listen(struct p2p_data *p2p, unsigned int timeout);
+
+/**
+ * p2p_connect - Start P2P group formation (GO negotiation)
+ * @p2p: P2P module context from p2p_init()
+ * @peer_addr: MAC address of the peer P2P client
+ * @wps_method: WPS method to be used in provisioning
+ * @go_intent: Local GO intent value (1..15)
+ * @own_interface_addr: Intended interface address to use with the group
+ * @force_freq: The only allowed channel frequency in MHz or 0
+ * @persistent_group: Whether to create a persistent group
+ * Returns: 0 on success, -1 on failure
+ */
+int p2p_connect(struct p2p_data *p2p, const u8 *peer_addr,
+ enum p2p_wps_method wps_method,
+ int go_intent, const u8 *own_interface_addr,
+ unsigned int force_freq, int persistent_group);
+
+/**
+ * p2p_authorize - Authorize P2P group formation (GO negotiation)
+ * @p2p: P2P module context from p2p_init()
+ * @peer_addr: MAC address of the peer P2P client
+ * @wps_method: WPS method to be used in provisioning
+ * @go_intent: Local GO intent value (1..15)
+ * @own_interface_addr: Intended interface address to use with the group
+ * @force_freq: The only allowed channel frequency in MHz or 0
+ * @persistent_group: Whether to create a persistent group
+ * Returns: 0 on success, -1 on failure
+ *
+ * This is like p2p_connect(), but the actual group negotiation is not
+ * initiated automatically, i.e., the other end is expected to do that.
+ */
+int p2p_authorize(struct p2p_data *p2p, const u8 *peer_addr,
+ enum p2p_wps_method wps_method,
+ int go_intent, const u8 *own_interface_addr,
+ unsigned int force_freq, int persistent_group);
+
+/**
+ * p2p_reject - Reject peer device (explicitly block connection attempts)
+ * @p2p: P2P module context from p2p_init()
+ * @peer_addr: MAC address of the peer P2P client
+ * Returns: 0 on success, -1 on failure
+ */
+int p2p_reject(struct p2p_data *p2p, const u8 *peer_addr);
+
+/**
+ * p2p_prov_disc_req - Send Provision Discovery Request
+ * @p2p: P2P module context from p2p_init()
+ * @peer_addr: MAC address of the peer P2P client
+ * @config_methods: WPS Config Methods value (only one bit set)
+ * @join: Whether this is used by a client joining an active group
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function can be used to request a discovered P2P peer to display a PIN
+ * (config_methods = WPS_CONFIG_DISPLAY) or be prepared to enter a PIN from us
+ * (config_methods = WPS_CONFIG_KEYPAD). The Provision Discovery Request frame
+ * is transmitted once immediately and if no response is received, the frame
+ * will be sent again whenever the target device is discovered during device
+ * dsicovery (start with a p2p_find() call). Response from the peer is
+ * indicated with the p2p_config::prov_disc_resp() callback.
+ */
+int p2p_prov_disc_req(struct p2p_data *p2p, const u8 *peer_addr,
+ u16 config_methods, int join);
+
+/**
+ * p2p_sd_request - Schedule a service discovery query
+ * @p2p: P2P module context from p2p_init()
+ * @dst: Destination peer or %NULL to apply for all peers
+ * @tlvs: P2P Service Query TLV(s)
+ * Returns: Reference to the query or %NULL on failure
+ *
+ * Response to the query is indicated with the p2p_config::sd_response()
+ * callback.
+ */
+void * p2p_sd_request(struct p2p_data *p2p, const u8 *dst,
+ const struct wpabuf *tlvs);
+
+/**
+ * p2p_sd_cancel_request - Cancel a pending service discovery query
+ * @p2p: P2P module context from p2p_init()
+ * @req: Query reference from p2p_sd_request()
+ * Returns: 0 if request for cancelled; -1 if not found
+ */
+int p2p_sd_cancel_request(struct p2p_data *p2p, void *req);
+
+/**
+ * p2p_sd_response - Send response to a service discovery query
+ * @p2p: P2P module context from p2p_init()
+ * @freq: Frequency from p2p_config::sd_request() callback
+ * @dst: Destination address from p2p_config::sd_request() callback
+ * @dialog_token: Dialog token from p2p_config::sd_request() callback
+ * @resp_tlvs: P2P Service Response TLV(s)
+ *
+ * This function is called as a response to the request indicated with
+ * p2p_config::sd_request() callback.
+ */
+void p2p_sd_response(struct p2p_data *p2p, int freq, const u8 *dst,
+ u8 dialog_token, const struct wpabuf *resp_tlvs);
+
+/**
+ * p2p_sd_service_update - Indicate a change in local services
+ * @p2p: P2P module context from p2p_init()
+ *
+ * This function needs to be called whenever there is a change in availability
+ * of the local services. This will increment the Service Update Indicator
+ * value which will be used in SD Request and Response frames.
+ */
+void p2p_sd_service_update(struct p2p_data *p2p);
+
+
+enum p2p_invite_role {
+ P2P_INVITE_ROLE_GO,
+ P2P_INVITE_ROLE_ACTIVE_GO,
+ P2P_INVITE_ROLE_CLIENT
+};
+
+/**
+ * p2p_invite - Invite a P2P Device into a group
+ * @p2p: P2P module context from p2p_init()
+ * @peer: Device Address of the peer P2P Device
+ * @role: Local role in the group
+ * @bssid: Group BSSID or %NULL if not known
+ * @ssid: Group SSID
+ * @ssid_len: Length of ssid in octets
+ * @force_freq: The only allowed channel frequency in MHz or 0
+ * @go_dev_addr: Forced GO Device Address or %NULL if none
+ * @persistent_group: Whether this is to reinvoke a persistent group
+ * Returns: 0 on success, -1 on failure
+ */
+int p2p_invite(struct p2p_data *p2p, const u8 *peer, enum p2p_invite_role role,
+ const u8 *bssid, const u8 *ssid, size_t ssid_len,
+ unsigned int force_freq, const u8 *go_dev_addr,
+ int persistent_group);
+
+/**
+ * p2p_presence_req - Request GO presence
+ * @p2p: P2P module context from p2p_init()
+ * @go_interface_addr: GO P2P Interface Address
+ * @own_interface_addr: Own P2P Interface Address for this group
+ * @freq: Group operating frequence (in MHz)
+ * @duration1: Preferred presence duration in microseconds
+ * @interval1: Preferred presence interval in microseconds
+ * @duration2: Acceptable presence duration in microseconds
+ * @interval2: Acceptable presence interval in microseconds
+ * Returns: 0 on success, -1 on failure
+ *
+ * If both duration and interval values are zero, the parameter pair is not
+ * specified (i.e., to remove Presence Request, use duration1 = interval1 = 0).
+ */
+int p2p_presence_req(struct p2p_data *p2p, const u8 *go_interface_addr,
+ const u8 *own_interface_addr, unsigned int freq,
+ u32 duration1, u32 interval1, u32 duration2,
+ u32 interval2);
+
+/**
+ * p2p_ext_listen - Set Extended Listen Timing
+ * @p2p: P2P module context from p2p_init()
+ * @freq: Group operating frequence (in MHz)
+ * @period: Availability period in milliseconds (1-65535; 0 to disable)
+ * @interval: Availability interval in milliseconds (1-65535; 0 to disable)
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function can be used to enable or disable (period = interval = 0)
+ * Extended Listen Timing. When enabled, the P2P Device will become
+ * discoverable (go into Listen State) every @interval milliseconds for at
+ * least @period milliseconds.
+ */
+int p2p_ext_listen(struct p2p_data *p2p, unsigned int period,
+ unsigned int interval);
+
+/* Event notifications from upper layer management operations */
+
+/**
+ * p2p_wps_success_cb - Report successfully completed WPS provisioning
+ * @p2p: P2P module context from p2p_init()
+ * @mac_addr: Peer address
+ *
+ * This function is used to report successfully completed WPS provisioning
+ * during group formation in both GO/Registrar and client/Enrollee roles.
+ */
+void p2p_wps_success_cb(struct p2p_data *p2p, const u8 *mac_addr);
+
+/**
+ * p2p_group_formation_failed - Report failed WPS provisioning
+ * @p2p: P2P module context from p2p_init()
+ *
+ * This function is used to report failed group formation. This can happen
+ * either due to failed WPS provisioning or due to 15 second timeout during
+ * the provisioning phase.
+ */
+void p2p_group_formation_failed(struct p2p_data *p2p);
+
+
+/* Event notifications from lower layer driver operations */
+
+/**
+ * p2p_probe_req_rx - Report reception of a Probe Request frame
+ * @p2p: P2P module context from p2p_init()
+ * @addr: Source MAC address
+ * @ie: Information elements from the Probe Request frame body
+ * @ie_len: Length of ie buffer in octets
+ * Returns: 0 to indicate the frame was not processed or 1 if it was
+ */
+int p2p_probe_req_rx(struct p2p_data *p2p, const u8 *addr, const u8 *ie,
+ size_t ie_len);
+
+/**
+ * p2p_rx_action - Report received Action frame
+ * @p2p: P2P module context from p2p_init()
+ * @da: Destination address of the received Action frame
+ * @sa: Source address of the received Action frame
+ * @bssid: Address 3 of the received Action frame
+ * @category: Category of the received Action frame
+ * @data: Action frame body after the Category field
+ * @len: Length of the data buffer in octets
+ * @freq: Frequency (in MHz) on which the frame was received
+ */
+void p2p_rx_action(struct p2p_data *p2p, const u8 *da, const u8 *sa,
+ const u8 *bssid, u8 category,
+ const u8 *data, size_t len, int freq);
+
+/**
+ * p2p_scan_res_handler - Indicate a P2P scan results
+ * @p2p: P2P module context from p2p_init()
+ * @bssid: BSSID of the scan result
+ * @freq: Frequency of the channel on which the device was found in MHz
+ * @level: Signal level (signal strength of the received Beacon/Probe Response
+ * frame)
+ * @ies: Pointer to IEs from the scan result
+ * @ies_len: Length of the ies buffer
+ * Returns: 0 to continue or 1 to stop scan result indication
+ *
+ * This function is called to indicate a scan result entry with P2P IE from a
+ * scan requested with struct p2p_config::p2p_scan(). This can be called during
+ * the actual scan process (i.e., whenever a new device is found) or as a
+ * sequence of calls after the full scan has been completed. The former option
+ * can result in optimized operations, but may not be supported by all
+ * driver/firmware designs. The ies buffer need to include at least the P2P IE,
+ * but it is recommended to include all IEs received from the device. The
+ * caller does not need to check that the IEs contain a P2P IE before calling
+ * this function since frames will be filtered internally if needed.
+ *
+ * This function will return 1 if it wants to stop scan result iteration (and
+ * scan in general if it is still in progress). This is used to allow faster
+ * start of a pending operation, e.g., to start a pending GO negotiation.
+ */
+int p2p_scan_res_handler(struct p2p_data *p2p, const u8 *bssid, int freq,
+ int level, const u8 *ies, size_t ies_len);
+
+/**
+ * p2p_scan_res_handled - Indicate end of scan results
+ * @p2p: P2P module context from p2p_init()
+ *
+ * This function is called to indicate that all P2P scan results from a scan
+ * have been reported with zero or more calls to p2p_scan_res_handler(). This
+ * function must be called as a response to successful
+ * struct p2p_config::p2p_scan() call if none of the p2p_scan_res_handler()
+ * calls stopped iteration.
+ */
+void p2p_scan_res_handled(struct p2p_data *p2p);
+
+/**
+ * p2p_send_action_cb - Notify TX status of an Action frame
+ * @p2p: P2P module context from p2p_init()
+ * @freq: Channel frequency in MHz
+ * @dst: Destination MAC address (Address 1)
+ * @src: Source MAC address (Address 2)
+ * @bssid: BSSID (Address 3)
+ * @success: Whether the transmission succeeded
+ *
+ * This function is used to indicate the result of an Action frame transmission
+ * that was requested with struct p2p_config::send_action() callback.
+ */
+void p2p_send_action_cb(struct p2p_data *p2p, unsigned int freq, const u8 *dst,
+ const u8 *src, const u8 *bssid, int success);
+
+/**
+ * p2p_listen_cb - Indicate the start of a requested Listen state
+ * @p2p: P2P module context from p2p_init()
+ * @freq: Listen channel frequency in MHz
+ * @duration: Duration for the Listen state in milliseconds
+ *
+ * This function is used to indicate that a Listen state requested with
+ * struct p2p_config::start_listen() callback has started.
+ */
+void p2p_listen_cb(struct p2p_data *p2p, unsigned int freq,
+ unsigned int duration);
+
+/**
+ * p2p_listen_end - Indicate the end of a requested Listen state
+ * @p2p: P2P module context from p2p_init()
+ * @freq: Listen channel frequency in MHz
+ * Returns: 0 if no operations were started, 1 if an operation was started
+ *
+ * This function is used to indicate that a Listen state requested with
+ * struct p2p_config::start_listen() callback has ended.
+ */
+int p2p_listen_end(struct p2p_data *p2p, unsigned int freq);
+
+void p2p_deauth_notif(struct p2p_data *p2p, const u8 *bssid, u16 reason_code,
+ const u8 *ie, size_t ie_len);
+
+void p2p_disassoc_notif(struct p2p_data *p2p, const u8 *bssid, u16 reason_code,
+ const u8 *ie, size_t ie_len);
+
+
+/* Per-group P2P state for GO */
+
+struct p2p_group;
+
+/**
+ * struct p2p_group_config - P2P group configuration
+ *
+ * This configuration is provided to the P2P module during initialization of
+ * the per-group information with p2p_group_init().
+ */
+struct p2p_group_config {
+ /**
+ * persistent_group - Whether the group is persistent
+ */
+ int persistent_group;
+
+ /**
+ * interface_addr - P2P Interface Address of the group
+ */
+ u8 interface_addr[ETH_ALEN];
+
+ /**
+ * cb_ctx - Context to use with callback functions
+ */
+ void *cb_ctx;
+
+ /**
+ * ie_update - Notification of IE update
+ * @ctx: Callback context from cb_ctx
+ * @beacon_ies: P2P IE for Beacon frames or %NULL if no change
+ * @proberesp_ies: P2P Ie for Probe Response frames
+ *
+ * P2P module uses this callback function to notify whenever the P2P IE
+ * in Beacon or Probe Response frames should be updated based on group
+ * events.
+ *
+ * The callee is responsible for freeing the returned buffer(s) with
+ * wpabuf_free().
+ */
+ void (*ie_update)(void *ctx, struct wpabuf *beacon_ies,
+ struct wpabuf *proberesp_ies);
+};
+
+/**
+ * p2p_group_init - Initialize P2P group
+ * @p2p: P2P module context from p2p_init()
+ * @config: P2P group configuration (will be freed by p2p_group_deinit())
+ * Returns: Pointer to private data or %NULL on failure
+ *
+ * This function is used to initialize per-group P2P module context. Currently,
+ * this is only used to manage GO functionality and P2P clients do not need to
+ * create an instance of this per-group information.
+ */
+struct p2p_group * p2p_group_init(struct p2p_data *p2p,
+ struct p2p_group_config *config);
+
+/**
+ * p2p_group_deinit - Deinitialize P2P group
+ * @group: P2P group context from p2p_group_init()
+ */
+void p2p_group_deinit(struct p2p_group *group);
+
+/**
+ * p2p_group_notif_assoc - Notification of P2P client association with GO
+ * @group: P2P group context from p2p_group_init()
+ * @addr: Interface address of the P2P client
+ * @ie: IEs from the (Re)association Request frame
+ * @len: Length of the ie buffer in octets
+ * Returns: 0 on success, -1 on failure
+ */
+int p2p_group_notif_assoc(struct p2p_group *group, const u8 *addr,
+ const u8 *ie, size_t len);
+
+/**
+ * p2p_group_assoc_resp_ie - Build P2P IE for (re)association response
+ * @group: P2P group context from p2p_group_init()
+ * @status: Status value (P2P_SC_SUCCESS if association succeeded)
+ * Returns: P2P IE for (Re)association Response or %NULL on failure
+ *
+ * The caller is responsible for freeing the returned buffer with
+ * wpabuf_free().
+ */
+struct wpabuf * p2p_group_assoc_resp_ie(struct p2p_group *group, u8 status);
+
+/**
+ * p2p_group_notif_disassoc - Notification of P2P client disassociation from GO
+ * @group: P2P group context from p2p_group_init()
+ * @addr: Interface address of the P2P client
+ */
+void p2p_group_notif_disassoc(struct p2p_group *group, const u8 *addr);
+
+/**
+ * p2p_group_notif_formation_done - Notification of completed group formation
+ * @group: P2P group context from p2p_group_init()
+ */
+void p2p_group_notif_formation_done(struct p2p_group *group);
+
+/**
+ * p2p_group_notif_noa - Notification of NoA change
+ * @group: P2P group context from p2p_group_init()
+ * @noa: Notice of Absence attribute payload, %NULL if none
+ * @noa_len: Length of noa buffer in octets
+ * Returns: 0 on success, -1 on failure
+ *
+ * Notify the P2P group management about a new NoA contents. This will be
+ * inserted into the P2P IEs in Beacon and Probe Response frames with rest of
+ * the group information.
+ */
+int p2p_group_notif_noa(struct p2p_group *group, const u8 *noa,
+ size_t noa_len);
+
+/**
+ * p2p_group_match_dev_type - Match device types in group with requested type
+ * @group: P2P group context from p2p_group_init()
+ * @wps: WPS TLVs from Probe Request frame (concatenated WPS IEs)
+ * Returns: 1 on match, 0 on mismatch
+ *
+ * This function can be used to match the Requested Device Type attribute in
+ * WPS IE with the device types of a group member for deciding whether a GO
+ * should reply to a Probe Request frame. Match will be reported if the WPS IE
+ * is not requested any specific device type.
+ */
+int p2p_group_match_dev_type(struct p2p_group *group, struct wpabuf *wps);
+
+/**
+ * p2p_group_go_discover - Send GO Discoverability Request to a group client
+ * @group: P2P group context from p2p_group_init()
+ * Returns: 0 on success (frame scheduled); -1 if client was not found
+ */
+int p2p_group_go_discover(struct p2p_group *group, const u8 *dev_id,
+ const u8 *searching_dev, int rx_freq);
+
+
+/* Generic helper functions */
+
+/**
+ * p2p_ie_text - Build text format description of P2P IE
+ * @p2p_ie: P2P IE
+ * @buf: Buffer for returning text
+ * @end: Pointer to the end of the buf area
+ * Returns: Number of octets written to the buffer or -1 on failure
+ *
+ * This function can be used to parse P2P IE contents into text format
+ * field=value lines.
+ */
+int p2p_ie_text(struct wpabuf *p2p_ie, char *buf, char *end);
+
+/**
+ * p2p_scan_result_text - Build text format description of P2P IE
+ * @ies: Information elements from scan results
+ * @ies_len: ies buffer length in octets
+ * @buf: Buffer for returning text
+ * @end: Pointer to the end of the buf area
+ * Returns: Number of octets written to the buffer or -1 on failure
+ *
+ * This function can be used to parse P2P IE contents into text format
+ * field=value lines.
+ */
+int p2p_scan_result_text(const u8 *ies, size_t ies_len, char *buf, char *end);
+
+/**
+ * p2p_assoc_req_ie - Build P2P IE for (Re)Association Request frame
+ * @p2p: P2P module context from p2p_init()
+ * @bssid: BSSID
+ * @buf: Buffer for writing the P2P IE
+ * @len: Maximum buf length in octets
+ * @p2p_group: Whether this is for association with a P2P GO
+ * @p2p_ie: Reassembled P2P IE data from scan results or %NULL if none
+ * Returns: Number of octets written into buf or -1 on failure
+ */
+int p2p_assoc_req_ie(struct p2p_data *p2p, const u8 *bssid, u8 *buf,
+ size_t len, int p2p_group, struct wpabuf *p2p_ie);
+
+/**
+ * p2p_scan_ie - Build P2P IE for Probe Request
+ * @p2p: P2P module context from p2p_init()
+ * @ies: Buffer for writing P2P IE
+ */
+void p2p_scan_ie(struct p2p_data *p2p, struct wpabuf *ies);
+
+/**
+ * p2p_go_params - Generate random P2P group parameters
+ * @p2p: P2P module context from p2p_init()
+ * @params: Buffer for parameters
+ * Returns: 0 on success, -1 on failure
+ */
+int p2p_go_params(struct p2p_data *p2p, struct p2p_go_neg_results *params);
+
+/**
+ * p2p_get_group_capab - Get Group Capability from P2P IE data
+ * @p2p_ie: P2P IE(s) contents
+ * Returns: Group Capability
+ */
+u8 p2p_get_group_capab(const struct wpabuf *p2p_ie);
+
+/**
+ * p2p_get_cross_connect_disallowed - Does WLAN AP disallows cross connection
+ * @p2p_ie: P2P IE(s) contents
+ * Returns: 0 if cross connection is allow, 1 if not
+ */
+int p2p_get_cross_connect_disallowed(const struct wpabuf *p2p_ie);
+
+/**
+ * p2p_get_go_dev_addr - Get P2P Device Address from P2P IE data
+ * @p2p_ie: P2P IE(s) contents
+ * Returns: Pointer to P2P Device Address or %NULL if not included
+ */
+const u8 * p2p_get_go_dev_addr(const struct wpabuf *p2p_ie);
+
+/**
+ * p2p_get_peer_info - Get P2P peer information in text format
+ * @p2p: P2P module context from p2p_init()
+ * @addr: P2P Device Address of the peer or %NULL to indicate the first peer
+ * @next: Whether to select the peer entry following the one indicated by addr
+ * @buf: Buffer for returning text
+ * @buflen: Maximum buffer length
+ * Returns: Number of octets written to the buffer or -1 on failure
+ */
+int p2p_get_peer_info(struct p2p_data *p2p, const u8 *addr, int next,
+ char *buf, size_t buflen);
+
+/**
+ * p2p_set_client_discoverability - Set client discoverability capability
+ * @p2p: P2P module context from p2p_init()
+ * @enabled: Whether client discoverability will be enabled
+ *
+ * This function can be used to disable (and re-enable) client discoverability.
+ * This capability is enabled by default and should not be disabled in normal
+ * use cases, i.e., this is mainly for testing purposes.
+ */
+void p2p_set_client_discoverability(struct p2p_data *p2p, int enabled);
+
+/**
+ * p2p_set_manageD_oper - Set managed P2P Device operations capability
+ * @p2p: P2P module context from p2p_init()
+ * @enabled: Whether managed P2P Device operations will be enabled
+ */
+void p2p_set_managed_oper(struct p2p_data *p2p, int enabled);
+
+int p2p_set_listen_channel(struct p2p_data *p2p, u8 reg_class, u8 channel);
+
+int p2p_set_ssid_postfix(struct p2p_data *p2p, const u8 *postfix, size_t len);
+
+int p2p_get_interface_addr(struct p2p_data *p2p, const u8 *dev_addr,
+ u8 *iface_addr);
+int p2p_get_dev_addr(struct p2p_data *p2p, const u8 *iface_addr,
+ u8 *dev_addr);
+
+void p2p_set_peer_filter(struct p2p_data *p2p, const u8 *addr);
+
+/**
+ * p2p_set_cross_connect - Set cross connection capability
+ * @p2p: P2P module context from p2p_init()
+ * @enabled: Whether cross connection will be enabled
+ */
+void p2p_set_cross_connect(struct p2p_data *p2p, int enabled);
+
+int p2p_get_oper_freq(struct p2p_data *p2p, const u8 *iface_addr);
+
+int p2p_add_device(struct p2p_data *p2p, const u8 *addr, int freq, int level,
+ const u8 *ies, size_t ies_len);
+
+/**
+ * p2p_set_intra_bss_dist - Set intra BSS distribution
+ * @p2p: P2P module context from p2p_init()
+ * @enabled: Whether intra BSS distribution will be enabled
+ */
+void p2p_set_intra_bss_dist(struct p2p_data *p2p, int enabled);
+
+/**
+ * p2p_supported_freq - Check whether channel is supported for P2P
+ * @p2p: P2P module context from p2p_init()
+ * @freq: Channel frequency in MHz
+ * Returns: 0 if channel not usable for P2P, 1 if usable for P2P
+ */
+int p2p_supported_freq(struct p2p_data *p2p, unsigned int freq);
+
+void p2p_update_channel_list(struct p2p_data *p2p, struct p2p_channels *chan);
+
+#endif /* P2P_H */
projects / mech_eap.git / blobdiff