mod_accounting = radiusd_test
func_accounting = accounting
- mod_preacct = radiusd_test
- func_preacct = preacct
+ mod_pre_proxy = radiusd_test
+ func_pre_proxy = pre_proxy
+
+ mod_post_proxy = radiusd_test
+ func_post_proxy = post_proxy
+
+ mod_post_auth = radiusd_test
+ func_post_auth = post_auth
+
+ mod_recv_coa = radiusd_test
+ func_recv_coa = recv_coa
+
+ mod_send_coa = radiusd_test
+ func_send_coa = send_coa
mod_detach = radiusd_test
func_detach = detach
# filename, but don't check if it's already there.
#
dbm {
- usersfile = ${raddbdir}/users_db
- }
-
- #
- # Persistent, embedded Perl interpreter.
- #
- perl {
- #
- # The Perl script to execute on authorize, authenticate,
- # accounting, xlat, etc. This is very similar to using
- # 'rlm_exec' module, but it is persistent, and therefore
- # faster.
- #
- module = /path/to/your/perl_module.pm
-
- #
- # The following hashes are given to the module and
- # filled with value-pairs (Attribute names and values)
- #
- # %RAD_CHECK Read-only Check items
- # %RAD_REQUEST Read-only Attributes from the request
- # %RAD_REPLY Read-write Attributes for the reply
- #
- # The return codes from functions in the perl_script
- # are passed directly back to the server. These
- # codes are defined in doc/configurable_failover,
- # src/include/modules.h (RLM_MODULE_REJECT, etc),
- # and are pre-defined in the 'example.pl' program
- # which is included.
- #
-
- #
- # List of functions in the module to call.
- # Comment out and change if you want to use other
- # function names than the defaults.
- #
- #func_authenticate = authenticate
- #func_authorize = authorize
- #func_preacct = preacct
- #func_accounting = accounting
- #func_checksimul = checksimul
- #func_pre_proxy = pre_proxy
- #func_post_proxy = post_proxy
- #func_post_auth = post_auth
- #func_xlat = xlat
- #func_detach = detach
-
- #
- # Comment out the following line if you whish
- # to use seperate functions for Start and Stop
- # accounting packets. In that case, the
- # func_accounting function is not called.
- #
- #func_start_accounting = accounting_start
- #func_stop_accounting = accounting_stop
-
- # Comment out the following lines if your perl is
- # compiled with ithreads support.
- # the settings bellow are the default one.
- #
- #max_clones = 32
- #start_clones = 32
- #min_spare_clones = 0
- #max_spare_clones = 32
- #cleanup_delay = 5
- #max_request_per_clone = 0
-
+ usersfile = ${confdir}/users_db
}
#
hash_reload = 600
}
- #
- # See also protocol_filter.conf
- #
- protocol_filter {
- #
- # Location of the protocol filter configuration file.
- #
- filename = ${raddbdir}/protocol_filter.conf
-
- #
- # The key to look up the section with filtering rules.
- #
- key = %{Realm:-DEFAULT}
- }
-
# Caching module
#
# Should be added in the post-auth section (after all other modules)
# cache-rejects: Do we also cache rejects, or not? (default 'yes')
#
caching {
- filename = ${raddbdir}/db.cache
+ filename = ${db_dir}/db.cache
cache-ttl = 1d
hit-ratio = 1000
key = "%{Acct-Unique-Session-Id}"
# cache-size = 2000
# cache-rejects = yes
}
+
+
+ # Simple module for logging of Account packets to radiusd.log
+ # You need to declare it in the accounting section for it to work
+ acctlog {
+ acctlog_update = ""
+ acctlog_start = "Connect: [%{User-Name}] (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} ip %{Framed-IP-Address})"
+ acctlog_stop = "Disconnect: [%{User-Name}] (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} ip %{Framed-IP-Address}) %{Acct-Session-Time} seconds"
+ acctlog_on = "NAS %C (%{NAS-IP-Address}) just came online"
+ acctlog_off = "NAS %C (%{NAS-IP-Address}) just went offline"
+ }
+
+ # Another implementation of the EAP module.
+ #
+ # This module requires the libeap.so file from the hostap
+ # software (http://hostap.epitest.fi/hostapd/). It has been
+ # tested on the development version of hostapd (0.6.1) ONLY.
+ #
+ # In order to use it, you MUST build a "libeap.so" in hostapd,
+ # which is not done by default.
+ #
+ # You MUST also edit the file: src/modules/rlm_eap2/Makefile
+ # to point to the location of the hostap include files.
+ #
+ # This module CANNOT be used in the same way as the current
+ # FreeRADIUS "eap" module. There is NO way to look inside of
+ # a tunneled request. There is NO way to proxy a tunneled
+ # request. There is NO way to even look at the user name inside
+ # of the tunneled request. There is NO way to control the
+ # choice of EAP types inside of the tunnel. You MUST force
+ # the server to choose "eap2" for authentication, because this
+ # module has no "authorize" section.
+ #
+ # If you want to use this module for experimentation, please
+ # post your comments to the freeradius-devel list:
+ #
+ # http://lists.freeradius.org/mailman/listinfo/freeradius-devel
+ #
+ # If you want to use this module in a production (i.e. real-world)
+ # environment:
+ #
+ # !!! DO NOT USE IT IN A PRODUCTION ENVIRONMENT !!!
+ #
+ # The module needs additional work to make it ready for
+ # production use.. Please supply patches, or sponsor the
+ # work by hiring a developer. Do NOT ask when the work will
+ # be done, because there is no plan to finish this module
+ # unless there is demand for it.
+ #
+ eap2 {
+ # EAP types are chosen in the order that they are
+ # listed in this section. There is no "default_eap_type"
+ # as with rlm_eap. Instead, the *first* EAP type is
+ # used as the default type.
+ #
+ peap {
+ }
+
+ ttls {
+ }
+
+ # This is the ONLY EAP type that has any configuration.
+ # All other EAP types have no configuration.
+ #
+ tls {
+ ca_cert = ${confdir}/certs/ca.pem
+ server_cert = ${confdir}/certs/server.pem
+ private_key_file = ${confdir}/certs/server.pem
+ private_key_password = whatever
+ }
+
+ #
+ # These next two methods do not supply keying material.
+ #
+ md5 {
+ }
+
+ mschapv2 {
+ }
+
+ # LEAP is NOT supported by this module.
+ # Use the "eap" module instead.
+
+ # For other methods that MIGHT work, see the
+ # configuration of hostap. The methods are statically
+ # linked in at compile time, and cannot be controlled
+ # here.
+ }
+
+ # Configuration for experimental EAP types. The sub-sections
+ # can be copied into eap.conf.
+ eap {
+ ikev2 {
+
+ # Server auth type
+ # Allowed values are:
+ # cert - for certificate based server authentication,
+ # other required settings for this type are
+ # 'private_key_file' and 'certificate_file'
+ # secret - for shared secret based server authentication,
+ # other required settings for this type is 'id'
+ # Default value of this option is 'secret'
+ # server_authtype=cert
+
+ # Allowed default client auth types
+ # Allowed values are:
+ # secret - for shared secret based client authentication
+ # cert - for certificate based client authentication
+ # both - shared secret and certificate is allowed
+ # none - authentication will always fail
+ # Default value for this option is 'both'. This option could
+ # be overwritten within 'usersfile' file by EAP-IKEv2-Auth
+ # option.
+ # default_authtype = both
+
+ # path to trusted CA certificate file
+ CA_file="/path/to/CA/cacert.pem"
+
+ # path to CRL file, if not set, then there will be no
+ # checks against CRL
+ # crl_file="/path/to/crl.pem"
+
+ # path to file with user settings
+ #
+ # Note that this file is read ONLY on module initialization!
+ #
+ # default ${confdir}/eap_ikev2_users
+ # usersfile=${confdir}/eap_ikev2_users
+
+#
+# Sample "eap_ikev2_users" file entry:
+#
+#username EAP-IKEv2-IDType := KEY_ID, EAP-IKEv2-Secret := "tajne"
+
+## where:
+## username - client user name from IKE-AUTH (IDr) or CommonName
+## from x509 certificate
+## EAP-IKEv2-IDType - ID Type - same as in expected IDType payload
+## allowable attributes for EAP-IKEv2-IDType:
+## IPV4_ADDR FQDN RFC822_ADDR IPV6_ADDR DER_ASN1_DN
+## DER_ASN1_GN KEY_ID
+## EAP-IKEv2-Secret - shared secret
+## EAP-IKEv2-AuthType - optional parameter which defines expected client auth
+## type. Allowed values are: secret,cert,both,none.
+## For the meaning of this values, please see the
+## description of 'default_authtype'.
+## This attribute can overwrite 'default_authtype' value.
+
+
+
+ # path to file with server private key
+ private_key_file="/path/to/srv-private-key.pem"
+
+ # password to private key file
+ private_key_password="passwd"
+
+ # path to file with server certificate
+ certificate_file="/path/to/srv-cert.pem"
+
+ # server identity string
+ id="deMaio"
+
+ # Server identity type. Allowed values are:
+ # IPV4_ADDR, FQDN, RFC822_ADDR, IPV6_ADDR, ASN1_DN, ASN1_GN,
+ # KEY_ID
+ # Default value is: KEY_ID
+ # id_type = KEY_ID
+
+
+ # MTU (default: 1398)
+ # fragment_size = 1398
+
+ # maximal allowed number of resends SA_INIT after receiving
+ # 'invalid KEY' notification (default 3)
+ # DH_counter_max = 3
+
+ # option which is used to control whenever send CERT REQ
+ # payload or not.
+ # Allowed values for this option are "yes" or "no".
+ #Default value is "no".
+ # certreq = "yes"
+
+ # option which cotrols fast reconnect capability.
+ # Allowed valuse for this option are "yes" or "no".
+ # Default value is "yes".
+ # enable_fast_reauth = "no"
+
+ # option which is used to control performing of DH exchange
+ # during fast rekeying protocol run.
+ # Allowed values for this option are "yes" or "no".
+ # Default value is "no"
+ # fast_DH_exchange = "yes"
+
+ # Option which is used to set up expiration time of inactive
+ # IKEv2 session.
+ # After selected period of time (in seconds), inactive
+ # session data will be deleted.
+ # Default value of this option is set to 900 seconds
+ # fast_timer_expire = 900
+
+ # list of server proposals of available cryptographic
+ # suites
+ proposals {
+ # proposal number #1
+ proposal {
+
+ # Supported transforms types: encryption,
+ # prf, integrity, dhgroup. For multiple
+ # transforms just simple repeat key (i.e.
+ # integity).
+
+ # encryption algorithm
+ # supported algorithms:
+ # null,3des,aes_128_cbc,aes_192_cbc,
+ # aes_256_cbc,idea
+ # blowfish:n, where n range from 8 to 448 bits,
+ # step 8 bits
+ # cast:n, where n range from 40 to 128 bits,
+ # step 8 bits
+ encryption = 3des
+
+ # pseudo random function. Supported prf's:
+ # hmac_md5, hmac_sha1, hmac_tiger
+ prf = hmac_sha1
+
+ # integrity algorithm. Supported algorithms:
+ # hmac_md5_96, hmac_sha1_96,des_mac
+ integrity = hmac_sha1_96
+ integrity = hmac_md5_96
+
+ # Diffie-Hellman groups:
+ # modp768, modp1024, modp1536, modp2048,
+ # modp3072, modp4096, modp6144, modp8192
+ dhgroup = modp2048
+ }
+
+ # proposal number #2
+ proposal {
+ encryption = 3des
+ prf = hmac_md5
+ integrity = hmac_md5_96
+ dhgroup = modp1024
+ }
+
+ # proposal number #3
+ proposal {
+ encryption=3des
+ prf=hmac_md5
+ integrity=hmac_md5_96
+ dhgroup=modp2048
+ }
+ }
+ }
+
+ fast {
+ pac_opaque_encr_key = 000102030405060708090a0b0c0d0e0f
+ eap_fast_a_id = xxxxxx
+ eap_fast_a_id_info = my_server
+ }
+ }