+# -*- text -*-
##
-## radiusd.conf -- FreeRADIUS server configuration file.
+## radiusd.conf -- FreeRADIUS server configuration file - @RADIUSD_VERSION_STRING@
##
## http://www.freeradius.org/
## $Id$
##
-# The location of other config files and
-# logfiles are declared in this file
+######################################################################
+#
+# Read "man radiusd" before editing this file. See the section
+# titled DEBUGGING. It outlines a method where you can quickly
+# obtain the configuration you want, without running into
+# trouble.
+#
+# Run the server in debugging mode, and READ the output.
#
-# Also general configuration for modules can be done
-# in this file, it is exported through the API to
-# modules that ask for it.
+# $ radiusd -X
+#
+# We cannot emphasize this point strongly enough. The vast
+# majority of problems can be solved by carefully reading the
+# debugging output, which includes warnings about common issues,
+# and suggestions for how they may be fixed.
+#
+# There may be a lot of output, but look carefully for words like:
+# "warning", "error", "reject", or "failure". The messages there
+# will usually be enough to guide you to a solution.
+#
+# If you are going to ask a question on the mailing list, then
+# explain what you are trying to do, and include the output from
+# debugging mode (radiusd -X). Failure to do so means that all
+# of the responses to your question will be people telling you
+# to "post the output of radiusd -X".
+
+######################################################################
+#
+# The location of other config files and logfiles are declared
+# in this file.
+#
+# Also general configuration for modules can be done in this
+# file, it is exported through the API to modules that ask for
+# it.
#
# See "man radiusd.conf" for documentation on the format of this
# file. Note that the individual configuration items are NOT
# documented in that "man" page. They are only documented here,
# in the comments.
#
-# As of 2.0.0, FreeRADIUS supports a simple processing language
-# in the "authorize", "authenticate", "accounting", etc. sections.
-# See "man unlang" for details.
+# The "unlang" policy language can be used to create complex
+# if / else policies. See "man unlang" for details.
#
prefix = @prefix@
raddbdir = @raddbdir@
radacctdir = @radacctdir@
+#
+# name of the running server. See also the "-n" command-line option.
+name = radiusd
+
# Location of config and logfiles.
confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/radiusd
+modconfdir = ${confdir}/mods-config
+certdir = ${confdir}/certs
+cadir = ${confdir}/certs
+run_dir = ${localstatedir}/run/${name}
-#
-# The logging messages for the server are appended to the
-# tail of this file.
-#
-log_file = ${logdir}/radius.log
-
-#
-# Destination for log messages. This can be one of:
-#
-# files - log to ${log_file}, as defined above.
-# syslog - to syslog (see also the log{} section, below)
-# stdout - standard output
-# stderr - standard error.
-#
-# The command-line option "-X" over-rides this option, and forces
-# logging to go to stdout.
-#
-log_destination = files
+# Should likely be ${localstatedir}/lib/radiusd
+db_dir = ${raddbdir}
#
# libdir: Where to find the rlm_* modules.
#
# e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid`
#
-pidfile = ${run_dir}/radiusd.pid
+pidfile = ${run_dir}/${name}.pid
+#
+# correct_escapes: use correct backslash escaping
+#
+# Prior to version 3.0.5, the handling of backslashes was a little
+# awkward, i.e. "wrong". In some cases, to get one backslash into
+# a regex, you had to put 4 in the config files.
+#
+# Version 3.0.5 fixes that. However, for backwards compatibility,
+# the new method of escaping is DISABLED BY DEFAULT. This means
+# that upgrading to 3.0.5 won't break your configuration.
+#
+# If you don't have double backslashes (i.e. \\) in your configuration,
+# this won't matter to you. If you do have them, fix that to use only
+# one backslash, and then set "correct_escapes = true".
+#
+# You can check for this by doing:
+#
+# $ grep '\\\\' $(find raddb -type f -print)
+#
+correct_escapes = true
-# user/group: The name (or #number) of the user/group to run radiusd as.
+# panic_action: Command to execute if the server dies unexpectedly.
+#
+# FOR PRODUCTION SYSTEMS, ACTIONS SHOULD ALWAYS EXIT.
+# AN INTERACTIVE ACTION MEANS THE SERVER IS NOT RESPONDING TO REQUESTS.
+# AN INTERACTICE ACTION MEANS THE SERVER WILL NOT RESTART.
+#
+# THE SERVER MUST NOT BE ALLOWED EXECUTE UNTRUSTED PANIC ACTION CODE
+# PATTACH CAN BE USED AS AN ATTACK VECTOR.
+#
+# The panic action is a command which will be executed if the server
+# receives a fatal, non user generated signal, i.e. SIGSEGV, SIGBUS,
+# SIGABRT or SIGFPE.
+#
+# This can be used to start an interactive debugging session so
+# that information regarding the current state of the server can
+# be acquired.
+#
+# The following string substitutions are available:
+# - %e The currently executing program e.g. /sbin/radiusd
+# - %p The PID of the currently executing program e.g. 12345
#
-# If these are commented out, the server will run as the user/group
-# that started it. In order to change to a different user/group, you
-# MUST be root ( or have root privleges ) to start the server.
+# Standard ${} substitutions are also allowed.
#
-# We STRONGLY recommend that you run the server with as few permissions
-# as possible. That is, if you're not using shadow passwords, the
-# user and group items below should be set to 'nobody'.
+# An example panic action for opening an interactive session in GDB would be:
#
-# On SCO (ODT 3) use "user = nouser" and "group = nogroup".
+#panic_action = "gdb %e %p"
#
-# NOTE that some kernels refuse to setgid(group) when the value of
-# (unsigned)group is above 60000; don't use group nobody on these systems!
+# Again, don't use that on a production system.
#
-# On systems with shadow passwords, you might have to set 'group = shadow'
-# for the server to be able to read the shadow password file. If you can
-# authenticate users while in debug mode, but not in daemon mode, it may be
-# that the debugging mode server is running as a user that can read the
-# shadow info, and the user listed below can not.
+# An example panic action for opening an automated session in GDB would be:
+#
+#panic_action = "gdb -silent -x ${raddbdir}/panic.gdb %e %p 2>&1 | tee ${logdir}/gdb-${name}-%p.log"
+#
+# That command can be used on a production system.
#
-#user = nobody
-#group = nobody
# max_request_time: The maximum time (in seconds) to handle a request.
#
# cached reply.
#
# If this value is set too low, then duplicate requests from the NAS
-# MAY NOT be detected, and will instead be handled as seperate requests.
+# MAY NOT be detected, and will instead be handled as separate requests.
#
# If this value is set too high, then the server will cache too many
# requests, and some new requests may get blocked. (See 'max_requests'.)
#
# Useful range of values: 256 to infinity
#
-max_requests = 1024
-
-# listen: Make the server listen on a particular IP address, and send
-# replies out from that address. This directive is most useful for
-# hosts with multiple IP addresses on one interface.
-#
-# If you want the server to listen on additional addresses, or on
-# additionnal ports, you can use multiple "listen" sections.
-#
-# Each section make the server listen for only one type of packet,
-# therefore authentication and accounting have to be configured in
-# different sections.
-#
-# The server ignore all "listen" section if you are using '-i' and '-p'
-# on the command line.
-#
-listen {
- # IP address on which to listen.
- # Allowed values are:
- # dotted quad (1.2.3.4)
- # hostname (radius.example.com)
- # wildcard (*)
- ipaddr = *
-
- # OR, you can use an IPv6 address, but not both
- # at the same time.
-# ipv6addr = :: # any. ::1 == localhost
-
- # Port on which to listen.
- # Allowed values are:
- # integer port number (1812)
- # 0 means "use /etc/services for the proper port"
- port = 0
-
- # Type of packets to listen for.
- # Allowed values are:
- # auth listen for authentication packets
- # acct listen for accounting packets
- #
- type = auth
-
- # Some systems support binding to an interface, in addition
- # to the IP address. This feature isn't strictly necessary,
- # but for sites with many IP addresses on one interface,
- # it's useful to say "listen on all addresses for eth0".
- #
- # If your system does not support this feature, you will
- # get an error if you try to use it.
- #
-# interface = eth0
-
- # Per-socket lists of clients. This is a very useful feature.
- #
- # The name here is a reference to a section elsewhere in
- # radiusd.conf, or clients.conf. Having the name as
- # a reference allows multiple sockets to use the same
- # set of clients.
- #
- # If this configuration is used, then the global list of clients
- # is IGNORED for this "listen" section. Take care configuring
- # this feature, to ensure you don't accidentally disable a
- # client you need.
- #
- # See clients.conf for the configuration of "per_socket_clients".
- #
-# clients = per_socket_clients
-}
-
-# This second "listen" section is for listening on the accounting
-# port, too.
-#
-listen {
- ipaddr = *
-# ipv6addr = ::
- port = 0
- type = acct
-# interface = eth0
-# clients = per_socket_clients
-}
+max_requests = 16384
# hostname_lookups: Log the names of clients or just their IP addresses
# e.g., www.freeradius.org (on) or 206.47.27.232 (off).
#
hostname_lookups = no
-# Core dumps are a bad thing. This should only be set to 'yes'
-# if you're debugging a problem with the server.
-#
-# allowed values: {no, yes}
-#
-allow_core_dumps = no
-
-# Regular expressions
-#
-# These items are set at configure time. If they're set to "yes",
-# then setting them to "no" turns off regular expression support.
-#
-# If they're set to "no" at configure time, then setting them to "yes"
-# WILL NOT WORK. It will give you an error.
-#
-regular_expressions = @REGEX@
-extended_expressions = @REGEX_EXTENDED@
-
#
# Logging section. The various "log_*" configuration items
# will eventually be moved here.
#
log {
#
- # Which syslog facility to use, if ${log_destination} == "syslog"
+ # Destination for log messages. This can be one of:
+ #
+ # files - log to "file", as defined below.
+ # syslog - to syslog (see also the "syslog_facility", below.
+ # stdout - standard output
+ # stderr - standard error.
+ #
+ # The command-line option "-X" over-rides this option, and forces
+ # logging to go to stdout.
+ #
+ destination = files
+
+ #
+ # Highlight important messages sent to stderr and stdout.
+ #
+ # Option will be ignored (disabled) if output if TERM is not
+ # an xterm or output is not to a TTY.
+ #
+ colourise = yes
+
+ #
+ # The logging messages for the server are appended to the
+ # tail of this file if destination == "files"
+ #
+ # If the server is running in debugging mode, this file is
+ # NOT used.
+ #
+ file = ${logdir}/radius.log
+
+ #
+ # Which syslog facility to use, if ${destination} == "syslog"
#
# The exact values permitted here are OS-dependent. You probably
# don't want to change this.
#
syslog_facility = daemon
-}
-# Log the full User-Name attribute, as it was found in the request.
-#
-# allowed values: {no, yes}
-#
-log_stripped_names = no
+ # Log the full User-Name attribute, as it was found in the request.
+ #
+ # allowed values: {no, yes}
+ #
+ stripped_names = no
-# Log authentication requests to the log file.
-#
-# allowed values: {no, yes}
-#
-log_auth = no
+ # Log authentication requests to the log file.
+ #
+ # allowed values: {no, yes}
+ #
+ auth = no
-# Log passwords with the authentication requests.
-# log_auth_badpass - logs password if it's rejected
-# log_auth_goodpass - logs password if it's correct
-#
-# allowed values: {no, yes}
-#
-log_auth_badpass = no
-log_auth_goodpass = no
+ # Log passwords with the authentication requests.
+ # auth_badpass - logs password if it's rejected
+ # auth_goodpass - logs password if it's correct
+ #
+ # allowed values: {no, yes}
+ #
+ auth_badpass = no
+ auth_goodpass = no
+
+ # Log additional text at the end of the "Login OK" messages.
+ # for these to work, the "auth" and "auth_goodpass" or "auth_badpass"
+ # configurations above have to be set to "yes".
+ #
+ # The strings below are dynamically expanded, which means that
+ # you can put anything you want in them. However, note that
+ # this expansion can be slow, and can negatively impact server
+ # performance.
+ #
+# msg_goodpass = ""
+# msg_badpass = ""
+
+ # The message when the user exceeds the Simultaneous-Use limit.
+ #
+ msg_denied = "You are already logged in - access denied"
+}
# The program to execute to do concurrency checks.
checkrad = ${sbindir}/checkrad
# of those attacks
#
security {
+ # chroot: directory where the server does "chroot".
+ #
+ # The chroot is done very early in the process of starting
+ # the server. After the chroot has been performed it
+ # switches to the "user" listed below (which MUST be
+ # specified). If "group" is specified, it switches to that
+ # group, too. Any other groups listed for the specified
+ # "user" in "/etc/group" are also added as part of this
+ # process.
+ #
+ # The current working directory (chdir / cd) is left
+ # *outside* of the chroot until all of the modules have been
+ # initialized. This allows the "raddb" directory to be left
+ # outside of the chroot. Once the modules have been
+ # initialized, it does a "chdir" to ${logdir}. This means
+ # that it should be impossible to break out of the chroot.
+ #
+ # If you are worried about security issues related to this
+ # use of chdir, then simply ensure that the "raddb" directory
+ # is inside of the chroot, end be sure to do "cd raddb"
+ # BEFORE starting the server.
+ #
+ # If the server is statically linked, then the only files
+ # that have to exist in the chroot are ${run_dir} and
+ # ${logdir}. If you do the "cd raddb" as discussed above,
+ # then the "raddb" directory has to be inside of the chroot
+ # directory, too.
+ #
+# chroot = /path/to/chroot/directory
+
+ # user/group: The name (or #number) of the user/group to run radiusd as.
+ #
+ # If these are commented out, the server will run as the
+ # user/group that started it. In order to change to a
+ # different user/group, you MUST be root ( or have root
+ # privileges ) to start the server.
+ #
+ # We STRONGLY recommend that you run the server with as few
+ # permissions as possible. That is, if you're not using
+ # shadow passwords, the user and group items below should be
+ # set to radius'.
+ #
+ # NOTE that some kernels refuse to setgid(group) when the
+ # value of (unsigned)group is above 60000; don't use group
+ # "nobody" on these systems!
+ #
+ # On systems with shadow passwords, you might have to set
+ # 'group = shadow' for the server to be able to read the
+ # shadow password file. If you can authenticate users while
+ # in debug mode, but not in daemon mode, it may be that the
+ # debugging mode server is running as a user that can read
+ # the shadow info, and the user listed below can not.
+ #
+ # The server will also try to use "initgroups" to read
+ # /etc/groups. It will join all groups where "user" is a
+ # member. This can allow for some finer-grained access
+ # controls.
+ #
+# user = radius
+# group = radius
+
+ # Core dumps are a bad thing. This should only be set to
+ # 'yes' if you're debugging a problem with the server.
+ #
+ # allowed values: {no, yes}
+ #
+ allow_core_dumps = no
+
#
# max_attributes: The maximum number of attributes
# permitted in a RADIUS packet. Packets which have MORE
# rejects will be sent at 'cleanup_delay' time, when the request
# is deleted from the internal cache of requests.
#
+ # As of Version 3.0.5, "reject_delay" has sub-second resolution.
+ # e.g. "reject_delay = 1.4" seconds is possible.
+ #
# Useful ranges: 1 to 5
reject_delay = 1
# packet. If the server responds, it must be alive, and the
# NAS can start using it for real requests.
#
+ # See also raddb/sites-available/status
+ #
status_server = yes
+
+@openssl_version_check_config@
}
# PROXY CONFIGURATION
# allowed values: {no, yes}
#
proxy_requests = yes
-$INCLUDE ${confdir}/proxy.conf
+$INCLUDE proxy.conf
# CLIENTS CONFIGURATION
#
-# Client configuration is defined in "clients.conf".
+# Client configuration is defined in "clients.conf".
#
# The 'clients.conf' file contains all of the information from the old
# Anything listed in 'clients.conf' will take precedence over the
# information from the old-style configuration files.
#
-$INCLUDE ${confdir}/clients.conf
-
-
-# SNMP CONFIGURATION
-#
-# Snmp configuration is only valid if SNMP support was enabled
-# at compile time.
-#
-# To enable SNMP querying of the server, set the value of the
-# 'snmp' attribute to 'yes'
-#
-snmp = no
-$INCLUDE ${confdir}/snmp.conf
+$INCLUDE clients.conf
# THREAD POOL CONFIGURATION
min_spare_servers = 3
max_spare_servers = 10
+ # When the server receives a packet, it places it onto an
+ # internal queue, where the worker threads (configured above)
+ # pick it up for processing. The maximum size of that queue
+ # is given here.
+ #
+ # When the queue is full, any new packets will be silently
+ # discarded.
+ #
+ # The most common cause of the queue being full is that the
+ # server is dependent on a slow database, and it has received
+ # a large "spike" of traffic. When that happens, there is
+ # very little you can do other than make sure the server
+ # receives less traffic, or make sure that the database can
+ # handle the load.
+ #
+# max_queue_size = 65536
+
# There may be memory leaks or resource allocation problems with
# the server. If so, set this value to 300 or so, so that the
# resources will be cleaned up periodically.
# '0' is a special value meaning 'infinity', or 'the servers never
# exit'
max_requests_per_server = 0
+
+ # Automatically limit the number of accounting requests.
+ # This configuration item tracks how many requests per second
+ # the server can handle. It does this by tracking the
+ # packets/s received by the server for processing, and
+ # comparing that to the packets/s handled by the child
+ # threads.
+ #
+
+ # If the received PPS is larger than the processed PPS, *and*
+ # the queue is more than half full, then new accounting
+ # requests are probabilistically discarded. This lowers the
+ # number of packets that the server needs to process. Over
+ # time, the server will "catch up" with the traffic.
+ #
+ # Throwing away accounting packets is usually safe and low
+ # impact. The NAS will retransmit them in a few seconds, or
+ # even a few minutes. Vendors should read RFC 5080 Section 2.2.1
+ # to see how accounting packets should be retransmitted. Using
+ # any other method is likely to cause network meltdowns.
+ #
+ auto_limit_acct = no
}
+######################################################################
+#
+# SNMP notifications. Uncomment the following line to enable
+# snmptraps. Note that you MUST also configure the full path
+# to the "snmptrap" command in the "trigger.conf" file.
+#
+#$INCLUDE trigger.conf
+
# MODULE CONFIGURATION
#
# The names and configuration of each module is located in this section.
#
# The instance names can then be used in later configuration
# INSTEAD of the original 'name'. See the 'radutmp' configuration
- # below for an example.
- #
-
- # PAP module to authenticate users based on their stored password
- #
- # Supports multiple encryption/hash schemes. See "man passwd"
- # for details.
- #
- # The "auto_header" configuration item can be set to "yes".
- # In this case, the module will look inside of the User-Password
- # attribute for the headers {crypt}, {clear}, etc., and will
- # automatically create the attribute on the right-hand side,
- # with the correct value. It will also automatically handle
- # Base-64 encoded data, hex strings, and binary data.
- pap {
- auto_header = no
- }
-
- # CHAP module
- #
- # To authenticate requests containing a CHAP-Password attribute.
- #
- chap {
- authtype = CHAP
- }
-
- # Pluggable Authentication Modules
- #
- # For Linux, see:
- # http://www.kernel.org/pub/linux/libs/pam/index.html
- #
- # WARNING: On many systems, the system PAM libraries have
- # memory leaks! We STRONGLY SUGGEST that you do not
- # use PAM for authentication, due to those memory leaks.
- #
- pam {
- #
- # The name to use for PAM authentication.
- # PAM looks in /etc/pam.d/${pam_auth_name}
- # for it's configuration. See 'redhat/radiusd-pam'
- # for a sample PAM configuration file.
- #
- # Note that any Pam-Auth attribute set in the 'authorize'
- # section will over-ride this one.
- #
- pam_auth = radiusd
- }
-
- # Unix /etc/passwd style authentication
- #
- unix {
- # As of 1.1.0, the Unix module no longer reads,
- # or caches /etc/passwd, /etc/shadow, or /etc/group.
- # If you wish to cache those files, see the passwd
- # module, above.
- #
-
- #
- # The location of the "wtmp" file.
- # This should be moved to it's own module soon.
- #
- # The only use for 'radlast'. If you don't use
- # 'radlast', then you can comment out this item.
- #
- radwtmp = ${logdir}/radwtmp
- }
-
- # Extensible Authentication Protocol
- #
- # For all EAP related authentications.
- # Now in another file, because it is very large.
- #
-$INCLUDE ${confdir}/eap.conf
-
- # Microsoft CHAP authentication
- #
- # This module supports MS-CHAP and MS-CHAPv2 authentication.
- # It also enforces the SMB-Account-Ctrl attribute.
- #
- mschap {
- #
- # As of 0.9, the mschap module does NOT support
- # reading from /etc/smbpasswd.
- #
- # If you are using /etc/smbpasswd, see the 'passwd'
- # module for an example of how to use /etc/smbpasswd
-
- # if use_mppe is not set to no mschap will
- # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and
- # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2
- #
- #use_mppe = no
-
- # if mppe is enabled require_encryption makes
- # encryption moderate
- #
- #require_encryption = yes
-
- # require_strong always requires 128 bit key
- # encryption
- #
- #require_strong = yes
-
- # Windows sends us a username in the form of
- # DOMAIN\user, but sends the challenge response
- # based on only the user portion. This hack
- # corrects for that incorrect behavior.
- #
- #with_ntdomain_hack = no
-
- # The module can perform authentication itself, OR
- # use a Windows Domain Controller. This configuration
- # directive tells the module to call the ntlm_auth
- # program, which will do the authentication, and return
- # the NT-Key. Note that you MUST have "winbindd" and
- # "nmbd" running on the local machine for ntlm_auth
- # to work. See the ntlm_auth program documentation
- # for details.
- #
- # Be VERY careful when editing the following line!
- #
- #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
- }
-
- # Lightweight Directory Access Protocol (LDAP)
- #
- # This module definition allows you to use LDAP for
- # authorization and authentication.
- #
- # See doc/rlm_ldap for description of configuration options
- # and sample authorize{} and authenticate{} blocks
- #
- # However, LDAP can be used for authentication ONLY when the
- # Access-Request packet contains a clear-text User-Password
- # attribute. LDAP authentication will NOT work for any other
- # authentication method.
- #
- # This means that LDAP servers don't understand EAP. If you
- # force "Auth-Type = LDAP", and then send the server a
- # request containing EAP authentication, then authentication
- # WILL NOT WORK.
- #
- # The solution is to use the default configuration, which does
- # work.
- #
- # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We
- # really can't emphasize this enough.
- #
- ldap {
- #
- # Note that this needs to match the name in the LDAP
- # server certificate, if you're using ldaps.
- server = "ldap.your.domain"
- #identity = "cn=admin,o=My Org,c=UA"
- #password = mypass
- basedn = "o=My Org,c=UA"
- filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
- #base_filter = "(objectclass=radiusprofile)"
-
- # How many connections to keep open to the LDAP server.
- # This saves time over opening a new LDAP socket for
- # every authentication request.
- ldap_connections_number = 5
-
- # seconds to wait for LDAP query to finish. default: 20
- timeout = 4
-
- # seconds LDAP server has to process the query (server-side
- # time limit). default: 20
- #
- # LDAP_OPT_TIMELIMIT is set to this value.
- timelimit = 3
-
- #
- # seconds to wait for response of the server. (network
- # failures) default: 10
- #
- # LDAP_OPT_NETWORK_TIMEOUT is set to this value.
- net_timeout = 1
-
- #
- # This subsection configures the tls related items
- # that control how FreeRADIUS connects to an LDAP
- # server. It contains all of the "tls_*" configuration
- # entries used in older versions of FreeRADIUS. Those
- # configuration entries can still be used, but we recommend
- # using these.
- #
- tls {
- # Set this to 'yes' to use TLS encrypted connections
- # to the LDAP database by using the StartTLS extended
- # operation.
- #
- # The StartTLS operation is supposed to be
- # used with normal ldap connections instead of
- # using ldaps (port 689) connections
- start_tls = no
-
- # cacertfile = /path/to/cacert.pem
- # cacertdir = /path/to/ca/dir/
- # certfile = /path/to/radius.crt
- # keyfile = /path/to/radius.key
- # randfile = /path/to/rnd
-
- # Certificate Verification requirements. Can be:
- # "never" (don't even bother trying)
- # "allow" (try, but don't fail if the cerificate
- # can't be verified)
- # "demand" (fail if the certificate doesn't verify.)
- #
- # The default is "allow"
- # require_cert = "demand"
- }
-
- # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA"
- # profile_attribute = "radiusProfileDn"
- # access_attr = "dialupAccess"
-
- # Mapping of RADIUS dictionary attributes to LDAP
- # directory attributes.
- dictionary_mapping = ${raddbdir}/ldap.attrmap
-
- # Set password_attribute = nspmPassword to get the
- # user's password from a Novell eDirectory
- # backend. This will work ONLY IF FreeRADIUS has been
- # built with the --with-edir configure option.
- #
- # password_attribute = userPassword
-
- # As of 1.1.0, the LDAP module will auto-discover
- # the password headers (which are non-standard).
- # It will use the following table to map passwords
- # to RADIUS attributes. The PAP module (see above)
- # can then automatically determine the hashing
- # method to use to authenticate the user.
- #
- # Header Attribute
- # ------ ---------
- # {clear} User-Password
- # {cleartext} User-Password
- # {md5} MD5-Password
- # {smd5} SMD5-Password
- # {crypt} Crypt-Password
- # {sha} SHA-Password
- # {ssha} SSHA-Password
- # {nt} NT-Password
- # {ns-mta-md5} NS-MTA-MD5-Password
- #
- #
- # The headers are compared in a case-insensitive manner.
- # The format of the password in LDAP (base 64-encoded, hex,
- # clear-text, whatever) is not that important. The PAP
- # module will figure it out.
- #
- # The default for "auto_header" is "no", to enable backwards
- # compatibility with the "password_header" directive,
- # which is now deprecated. If this is set to "yes",
- # then the above table will be used, and the
- # "password_header" directive will be ignored.
-
- #auto_header = yes
-
- # Un-comment the following to disable Novell
- # eDirectory account policy check and intruder
- # detection. This will work *only if* FreeRADIUS is
- # configured to build with --with-edir option.
- #
- edir_account_policy_check = no
-
- #
- # Group membership checking. Disabled by default.
- #
- # groupname_attribute = cn
- # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
- # groupmembership_attribute = radiusGroupName
-
- # compare_check_items = yes
- # do_xlat = yes
- # access_attr_used_for_allow = yes
-
- #
- # By default, if the packet contains a User-Password,
- # and no other module is configured to handle the
- # authentication, the LDAP module sets itself to do
- # LDAP bind for authentication.
- #
- # THIS WILL ONLY WORK FOR PAP AUTHENTICATION.
- #
- # THIS WILL NOT WORK FOR CHAP, MS-CHAP, or 802.1x (EAP).
- #
- # You can disable this behavior by setting the following
- # configuration entry to "no".
- #
- # allowed values: {no, yes}
- # set_auth_type = yes
-
- # ldap_debug: debug flag for LDAP SDK
- # (see OpenLDAP documentation). Set this to enable
- # huge amounts of LDAP debugging on the screen.
- # You should only use this if you are an LDAP expert.
- #
- # default: 0x0000 (no debugging messages)
- # Example:(LDAP_DEBUG_FILTER+LDAP_DEBUG_CONNS)
- #ldap_debug = 0x0028
- }
-
- # passwd module allows to do authorization via any passwd-like
- # file and to extract any attributes from these modules
- #
- # parameters are:
- # filename - path to filename
- # format - format for filename record. This parameters
- # correlates record in the passwd file and RADIUS
- # attributes.
- #
- # Field marked as '*' is key field. That is, the parameter
- # with this name from the request is used to search for
- # the record from passwd file
- # Attribute marked as '=' is added to reply_itmes instead
- # of default configure_itmes
- # Attribute marked as '~' is added to request_items
- #
- # Field marked as ',' may contain a comma separated list
- # of attributes.
- # hashsize - hashtable size. If 0 or not specified records are not
- # stored in memory and file is red on every request.
- # allowmultiplekeys - if few records for every key are allowed
- # ignorenislike - ignore NIS-related records
- # delimiter - symbol to use as a field separator in passwd file,
- # for format ':' symbol is always used. '\0', '\n' are
- # not allowed
+ # for an example.
#
- # An example configuration for using /etc/smbpasswd.
- #
- #passwd etc_smbpasswd {
- # filename = /etc/smbpasswd
- # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::"
- # hashsize = 100
- # ignorenislike = no
- # allowmultiplekeys = no
- #}
-
- # Similar configuration, for the /etc/group file. Adds a Group-Name
- # attribute for every group that the user is member of.
- #
- #passwd etc_group {
- # filename = /etc/group
- # format = "=Group-Name:::*,User-Name"
- # hashsize = 50
- # ignorenislike = yes
- # allowmultiplekeys = yes
- # delimiter = ":"
- #}
-
- # Realm module, for proxying.
- #
- # You can have multiple instances of the realm module to
- # support multiple realm syntaxs at the same time. The
- # search order is defined by the order in the authorize and
- # preacct sections.
- #
- # Four config options:
- # format - must be "prefix" or "suffix"
- # The special cases of "DEFAULT"
- # and "NULL" are allowed, too.
- # delimiter - must be a single character
-
- # 'realm/username'
- #
- # Using this entry, IPASS users have their realm set to "IPASS".
- realm IPASS {
- format = prefix
- delimiter = "/"
- }
-
- # 'username@realm'
- #
- realm suffix {
- format = suffix
- delimiter = "@"
- }
-
- # 'username%realm'
- #
- realm realmpercent {
- format = suffix
- delimiter = "%"
- }
-
- #
- # 'domain\user'
- #
- realm ntdomain {
- format = prefix
- delimiter = "\\"
- }
-
- # A simple value checking module
- #
- # It can be used to check if an attribute value in the request
- # matches a (possibly multi valued) attribute in the check
- # items This can be used for example for caller-id
- # authentication. For the module to run, both the request
- # attribute and the check items attribute must exist
- #
- # i.e.
- # A user has an ldap entry with 2 radiusCallingStationId
- # attributes with values "12345678" and "12345679". If we
- # enable rlm_checkval, then any request which contains a
- # Calling-Station-Id with one of those two values will be
- # accepted. Requests with other values for
- # Calling-Station-Id will be rejected.
- #
- # Regular expressions in the check attribute value are allowed
- # as long as the operator is '=~'
- #
- checkval {
- # The attribute to look for in the request
- item-name = Calling-Station-Id
-
- # The attribute to look for in check items. Can be multi valued
- check-name = Calling-Station-Id
-
- # The data type. Can be
- # string,integer,ipaddr,date,abinary,octets
- data-type = string
-
- # If set to yes and we dont find the item-name attribute in the
- # request then we send back a reject
- # DEFAULT is no
- #notfound-reject = no
- }
-
- # rewrite arbitrary packets. Useful in accounting and authorization.
- #
#
- # The module can also use the Rewrite-Rule attribute. If it
- # is set and matches the name of the module instance, then
- # that module instance will be the only one which runs.
+ # As of 3.0, modules are in mods-enabled/. Files matching
+ # the regex /[a-zA-Z0-9_.]+/ are loaded. The modules are
+ # initialized ONLY if they are referenced in a processing
+ # section, such as authorize, authenticate, accounting,
+ # pre/post-proxy, etc.
#
- # Also if new_attribute is set to yes then a new attribute
- # will be created containing the value replacewith and it
- # will be added to searchin (packet, reply, proxy, proxy_reply or config).
- # searchfor,ignore_case and max_matches will be ignored in that case.
- #
- # Backreferences are supported: %{0} will contain the string the whole match
- # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses
- #
- # If max_matches is greater than one the backreferences will correspond to the
- # first match
-
- #
- #attr_rewrite sanecallerid {
- # attribute = Called-Station-Id
- # may be "packet", "reply", "proxy", "proxy_reply" or "config"
- # searchin = packet
- # searchfor = "[+ ]"
- # replacewith = ""
- # ignore_case = no
- # new_attribute = no
- # max_matches = 10
- # ## If set to yes then the replace string will be appended to the original string
- # append = no
- #}
-
- # Preprocess the incoming RADIUS request, before handing it off
- # to other modules.
- #
- # This module processes the 'huntgroups' and 'hints' files.
- # In addition, it re-writes some weird attributes created
- # by some NASes, and converts the attributes into a form which
- # is a little more standard.
- #
- preprocess {
- huntgroups = ${confdir}/huntgroups
- hints = ${confdir}/hints
-
- # This hack changes Ascend's wierd port numberings
- # to standard 0-??? port numbers so that the "+" works
- # for IP address assignments.
- with_ascend_hack = no
- ascend_channels_per_line = 23
-
- # Windows NT machines often authenticate themselves as
- # NT_DOMAIN\username
- #
- # If this is set to 'yes', then the NT_DOMAIN portion
- # of the user-name is silently discarded.
- #
- # This configuration entry SHOULD NOT be used.
- # See the "realms" module for a better way to handle
- # NT domains.
- with_ntdomain_hack = no
-
- # Specialix Jetstream 8500 24 port access server.
- #
- # If the user name is 10 characters or longer, a "/"
- # and the excess characters after the 10th are
- # appended to the user name.
- #
- # If you're not running that NAS, you don't need
- # this hack.
- with_specialix_jetstream_hack = no
-
- # Cisco (and Quintum in Cisco mode) sends it's VSA attributes
- # with the attribute name *again* in the string, like:
- #
- # H323-Attribute = "h323-attribute=value".
- #
- # If this configuration item is set to 'yes', then
- # the redundant data in the the attribute text is stripped
- # out. The result is:
- #
- # H323-Attribute = "value"
- #
- # If you're not running a Cisco or Quintum NAS, you don't
- # need this hack.
- with_cisco_vsa_hack = no
- }
-
- # Livingston-style 'users' file
- #
- files {
- # The default key attribute to use for matches. The content
- # of this attribute is used to match the "name" of the
- # entry.
- #key = "%{Stripped-User-Name:-%{User-Name}}"
-
- usersfile = ${confdir}/users
- acctusersfile = ${confdir}/acct_users
- preproxy_usersfile = ${confdir}/preproxy_users
-
- # If you want to use the old Cistron 'users' file
- # with FreeRADIUS, you should change the next line
- # to 'compat = cistron'. You can the copy your 'users'
- # file from Cistron.
- compat = no
- }
-
- # Write a detailed log of all accounting records received.
- #
- detail {
- # Note that we do NOT use NAS-IP-Address here, as
- # that attribute MAY BE from the originating NAS, and
- # NOT from the proxy which actually sent us the
- # request. The Client-IP-Address attribute is ALWAYS
- # the address of the client which sent us the
- # request.
- #
- # The following line creates a new detail file for
- # every radius client (by IP address or hostname).
- # In addition, a new detail file is created every
- # day, so that the detail file doesn't have to go
- # through a 'log rotation'
- #
- # If your detail files are large, you may also want
- # to add a ':%H' (see doc/variables.txt) to the end
- # of it, to create a new detail file every hour, e.g.:
- #
- # ..../detail-%Y%m%d:%H
- #
- # This will create a new detail file for every hour.
- #
- detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
-
- #
- # The Unix-style permissions on the 'detail' file.
- #
- # The detail file often contains secret or private
- # information about users. So by keeping the file
- # permissions restrictive, we can prevent unwanted
- # people from seeing that information.
- detailperm = 0600
-
- #
- # Every entry in the detail file has a header which
- # is a timestamp. By default, we use the ctime
- # format (see "man ctime" for details).
- #
- # The header can be customized by editing this
- # string. See "doc/variables.txt" for a description
- # of what can be put here.
- #
- header = "%t"
-
- #
- # Certain attributes such as User-Password may be
- # "sensitive", so they should not be printed in the
- # detail file. This section lists the attributes
- # that should be suppressed.
- #
- # The attributes should be listed one to a line.
- #
- #suppress {
- # User-Password
- #}
-
- }
-
- #
- # Many people want to log authentication requests.
- # Rather than modifying the server core to print out more
- # messages, we can use a different instance of the 'detail'
- # module, to log the authentication requests to a file.
- #
- # You will also need to un-comment the 'auth_log' line
- # in the 'authorize' section, below.
- #
- # detail auth_log {
- # detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d
-
- #
- # This MUST be 0600, otherwise anyone can read
- # the users passwords!
- # detailperm = 0600
-
- # You may also strip out passwords completely
- #suppress {
- # User-Password
- #}
- # }
-
- #
- # This module logs authentication reply packets sent
- # to a NAS. Both Access-Accept and Access-Reject packets
- # are logged.
- #
- # You will also need to un-comment the 'reply_log' line
- # in the 'post-auth' section, below.
- #
- # detail reply_log {
- # detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d
-
- # detailperm = 0600
- # }
-
- #
- # This module logs packets proxied to a home server.
- #
- # You will also need to un-comment the 'pre_proxy_log' line
- # in the 'pre-proxy' section, below.
- #
- # detail pre_proxy_log {
- # detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d
-
- #
- # This MUST be 0600, otherwise anyone can read
- # the users passwords!
- # detailperm = 0600
-
- # You may also strip out passwords completely
- #suppress {
- # User-Password
- #}
- # }
-
- #
- # This module logs response packets from a home server.
- #
- # You will also need to un-comment the 'post_proxy_log' line
- # in the 'post-proxy' section, below.
- #
- # detail post_proxy_log {
- # detailfile = ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d
-
- # detailperm = 0600
- # }
-
- #
- # The rlm_sql_log module appends the SQL queries in a log
- # file which is read later by the radsqlrelay program.
- #
- # This module only performs the dynamic expansion of the
- # variables found in the SQL statements. No operation is
- # executed on the database server. (this could be done
- # later by an external program) That means the module is
- # useful only with non-"SELECT" statements.
- #
- # See rlm_sql_log(5) manpage.
- #
-# sql_log {
-# path = ${radacctdir}/sql-relay
-# acct_table = "radacct"
-# postauth_table = "radpostauth"
-#
-# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '%S', '0', '0', '');"
-# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \
-# '%{Acct-Terminate-Cause}');"
-# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');"
-#
-# Post-Auth = "INSERT INTO ${postauth_table} \
-# (user, pass, reply, date) VALUES \
-# ('%{User-Name}', '%{User-Password:-Chap-Password}', \
-# '%{reply:Packet-Type}', '%S');"
-# }
-
- #
- # Create a unique accounting session Id. Many NASes re-use
- # or repeat values for Acct-Session-Id, causing no end of
- # confusion.
- #
- # This module will add a (probably) unique session id
- # to an accounting packet based on the attributes listed
- # below found in the packet. See doc/rlm_acct_unique for
- # more information.
- #
- acct_unique {
- key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
- }
-
-
- # Include another file that has the SQL-related configuration.
- # This is another file only because it tends to be big.
- #
- $INCLUDE ${confdir}/sql.conf
-
-
- # For Cisco VoIP specific accounting with Postgresql,
- # use: ${confdir}/sql/postgresql/voip-postpaid.conf
- #
- # You will also need the sql schema from:
- # src/billing/cisco_h323_db_schema-postgres.sql
- # Note: This config can be use AS WELL AS the standard sql
- # config if you need SQL based Auth
-
-
- # Write a 'utmp' style file, of which users are currently
- # logged in, and where they've logged in from.
- #
- # This file is used mainly for Simultaneous-Use checking,
- # and also 'radwho', to see who's currently logged in.
- #
- radutmp {
- # Where the file is stored. It's not a log file,
- # so it doesn't need rotating.
- #
- filename = ${logdir}/radutmp
-
- # The field in the packet to key on for the
- # 'user' name, If you have other fields which you want
- # to use to key on to control Simultaneous-Use,
- # then you can use them here.
- #
- # Note, however, that the size of the field in the
- # 'utmp' data structure is small, around 32
- # characters, so that will limit the possible choices
- # of keys.
- #
- # You may want instead: %{Stripped-User-Name:-%{User-Name}}
- username = %{User-Name}
-
-
- # Whether or not we want to treat "user" the same
- # as "USER", or "User". Some systems have problems
- # with case sensitivity, so this should be set to
- # 'no' to enable the comparisons of the key attribute
- # to be case insensitive.
- #
- case_sensitive = yes
-
- # Accounting information may be lost, so the user MAY
- # have logged off of the NAS, but we haven't noticed.
- # If so, we can verify this information with the NAS,
- #
- # If we want to believe the 'utmp' file, then this
- # configuration entry can be set to 'no'.
- #
- check_with_nas = yes
-
- # Set the file permissions, as the contents of this file
- # are usually private.
- perm = 0600
-
- callerid = "yes"
- }
-
- # "Safe" radutmp - does not contain caller ID, so it can be
- # world-readable, and radwho can work for normal users, without
- # exposing any information that isn't already exposed by who(1).
- #
- # This is another 'instance' of the radutmp module, but it is given
- # then name "sradutmp" to identify it later in the "accounting"
- # section.
- radutmp sradutmp {
- filename = ${logdir}/sradutmp
- perm = 0644
- callerid = "no"
- }
-
- # attr_filter - filters the attributes received in replies from
- # proxied servers, to make sure we send back to our RADIUS client
- # only allowed attributes.
- attr_filter attr_filter.post-proxy {
- attrsfile = ${confdir}/attrs
- }
-
- # attr_filter - filters the attributes in the packets we send to
- # the RADIUS home servers.
- attr_filter attr_filter.pre-proxy {
- attrsfile = ${confdir}/attrs.pre-proxy
- }
-
- # Enforce RFC requirements on the contents of Access-Reject
- # packets. See the comments at the top of the file for
- # more details.
- #
- attr_filter attr_filter.access_reject {
- key = %{User-Name}
- attrsfile = ${confdir}/attrs.access_reject
- }
-
- # Enforce RFC requirements on the contents of the
- # Accounting-Response packets. See the comments at the
- # top of the file for more details.
- #
- attr_filter attr_filter.accounting_response {
- key = %{User-Name}
- attrsfile = ${confdir}/attrs.accounting_response
- }
-
- # counter module:
- # This module takes an attribute (count-attribute).
- # It also takes a key, and creates a counter for each unique
- # key. The count is incremented when accounting packets are
- # received by the server. The value of the increment depends
- # on the attribute type.
- # If the attribute is Acct-Session-Time or of an integer type we add
- # the value of the attribute. If it is anything else we increase the
- # counter by one.
- #
- # The 'reset' parameter defines when the counters are all reset to
- # zero. It can be hourly, daily, weekly, monthly or never.
- #
- # hourly: Reset on 00:00 of every hour
- # daily: Reset on 00:00:00 every day
- # weekly: Reset on 00:00:00 on sunday
- # monthly: Reset on 00:00:00 of the first day of each month
- #
- # It can also be user defined. It should be of the form:
- # num[hdwm] where:
- # h: hours, d: days, w: weeks, m: months
- # If the letter is ommited days will be assumed. In example:
- # reset = 10h (reset every 10 hours)
- # reset = 12 (reset every 12 days)
- #
- #
- # The check-name attribute defines an attribute which will be
- # registered by the counter module and can be used to set the
- # maximum allowed value for the counter after which the user
- # is rejected.
- # Something like:
- #
- # DEFAULT Max-Daily-Session := 36000
- # Fall-Through = 1
- #
- # You should add the counter module in the instantiate
- # section so that it registers check-name before the files
- # module reads the users file.
- #
- # If check-name is set and the user is to be rejected then we
- # send back a Reply-Message and we log a Failure-Message in
- # the radius.log
- # If the count attribute is Acct-Session-Time then on each login
- # we send back the remaining online time as a Session-Timeout attribute
- # ELSE and if the reply-name is set, we send back that attribute.
- # The reply-name attribute MUST be of an integer type.
- #
- # The counter-name can also be used instead of using the check-name
- # like below:
- #
- # DEFAULT Daily-Session-Time > 3600, Auth-Type = Reject
- # Reply-Message = "You've used up more than one hour today"
- #
- # The allowed-servicetype attribute can be used to only take
- # into account specific sessions. For example if a user first
- # logs in through a login menu and then selects ppp there will
- # be two sessions. One for Login-User and one for Framed-User
- # service type. We only need to take into account the second one.
- #
- # The module should be added in the instantiate, authorize and
- # accounting sections. Make sure that in the authorize
- # section it comes after any module which sets the
- # 'check-name' attribute.
- #
- counter daily {
- filename = ${raddbdir}/db.daily
- key = User-Name
- count-attribute = Acct-Session-Time
- reset = daily
- counter-name = Daily-Session-Time
- check-name = Max-Daily-Session
- reply-name = Session-Timeout
- allowed-servicetype = Framed-User
- cache-size = 5000
- }
-
- #
- # This module is an SQL enabled version of the counter module.
- #
- # Rather than maintaining seperate (GDBM) databases of
- # accounting info for each counter, this module uses the data
- # stored in the raddacct table by the sql modules. This
- # module NEVER does any database INSERTs or UPDATEs. It is
- # totally dependent on the SQL module to process Accounting
- # packets.
- #
- $INCLUDE ${confdir}/sql/mysql/counter.conf
- #$INCLUDE ${confdir}/sql/postgresql/counter.conf
-
- #
- # The "always" module is here for debugging purposes. Each
- # instance simply returns the same result, always, without
- # doing anything.
- always fail {
- rcode = fail
- }
- always reject {
- rcode = reject
- }
- always noop {
- rcode = noop
- }
- always handled {
- rcode = handled
- }
- always updated {
- rcode = updated
- }
- always notfound {
- rcode = notfound
- }
- always ok {
- rcode = ok
- simulcount = 0
- mpp = no
- }
-
- #
- # The 'expression' module currently has no configuration.
- #
- # This module is useful only for 'xlat'. To use it,
- # put 'exec' into the 'instantiate' section. You can then
- # do dynamic translation of attributes like:
- #
- # Attribute-Name = `%{expr:2 + 3 + %{exec: uid -u}}`
- #
- # The value of the attribute will be replaced with the output
- # of the program which is executed. Due to RADIUS protocol
- # limitations, any output over 253 bytes will be ignored.
- #
- # The module also registers a few paircompare functions
- expr {
- }
-
- #
- # The 'digest' module currently has no configuration.
- #
- # "Digest" authentication against a Cisco SIP server.
- # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details
- # on performing digest authentication for Cisco SIP servers.
- #
- digest {
- }
-
- #
- # The expiration module. This handles the Expiration attribute
- # It should be included in the *end* of the authorize section
- # in order to handle user Expiration. It should also be included
- # in the instantiate section in order to register the Expiration
- # compare function
- #
- expiration {
- #
- # The Reply-Message which will be sent back in case the
- # account has expired. Dynamic substitution is supported
- #
- reply-message = "Password Has Expired\r\n"
-# reply-message = "Your account has expired, %{User-Name}\r\n"
- }
-
- # The logintime module. This handles the Login-Time,
- # Current-Time, and Time-Of-Day attributes. It should be
- # included in the *end* of the authorize section in order to
- # handle Login-Time checks. It should also be included in the
- # instantiate section in order to register the Current-Time
- # and Time-Of-Day comparison functions.
- #
- # When the Login-Time attribute is set to some value, and the
- # user has bene permitted to log in, a Session-Timeout is
- # calculated based on the remaining time. See "doc/README".
- #
- logintime {
- #
- # The Reply-Message which will be sent back in case
- # the account is calling outside of the allowed
- # timespan. Dynamic substitution is supported.
- #
- reply-message = "You are calling outside your allowed timespan\r\n"
-# reply-message = "Outside allowed timespan (%{control:Login-Time}), %{User-Name}\r\n"
-
- # The minimum timeout (in seconds) a user is allowed
- # to have. If the calculated timeout is lower we don't
- # allow the logon. Some NASes do not handle values
- # lower than 60 seconds well.
- minimum-timeout = 60
- }
- #
- # Execute external programs
- #
- # This module is useful only for 'xlat'. To use it,
- # put 'exec' into the 'instantiate' section. You can then
- # do dynamic translation of attributes like:
- #
- # Attribute-Name = `%{exec:/path/to/program args}`
- #
- # The value of the attribute will be replaced with the output
- # of the program which is executed. Due to RADIUS protocol
- # limitations, any output over 253 bytes will be ignored.
- #
- # The RADIUS attributes from the user request will be placed
- # into environment variables of the executed program, as
- # described in 'doc/variables.txt'
- #
- exec {
- wait = yes
- input_pairs = request
- shell_escape = yes
- output = none
- }
-
- #
- # This is a more general example of the execute module.
- #
- # This one is called "echo".
- #
- # Attribute-Name = `%{echo:/path/to/program args}`
- #
- # If you wish to execute an external program in more than
- # one section (e.g. 'authorize', 'pre_proxy', etc), then it
- # is probably best to define a different instance of the
- # 'exec' module for every section.
- #
- # The return value of the program run determines the result
- # of the exec instance call as follows:
- # (See doc/configurable_failover for details)
- #
- # < 0 : fail the module failed
- # = 0 : ok the module succeeded
- # = 1 : reject the module rejected the user
- # = 2 : fail the module failed
- # = 3 : ok the module succeeded
- # = 4 : handled the module has done everything to handle the request
- # = 5 : invalid the user's configuration entry was invalid
- # = 6 : userlock the user was locked out
- # = 7 : notfound the user was not found
- # = 8 : noop the module did nothing
- # = 9 : updated the module updated information in the request
- # > 9 : fail the module failed
- #
- exec echo {
- #
- # Wait for the program to finish.
- #
- # If we do NOT wait, then the program is "fire and
- # forget", and any output attributes from it are ignored.
- #
- # If we are looking for the program to output
- # attributes, and want to add those attributes to the
- # request, then we MUST wait for the program to
- # finish, and therefore set 'wait=yes'
- #
- # allowed values: {no, yes}
- wait = yes
-
- #
- # The name of the program to execute, and it's
- # arguments. Dynamic translation is done on this
- # field, so things like the following example will
- # work.
- #
- program = "/bin/echo %{User-Name}"
-
- #
- # The attributes which are placed into the
- # environment variables for the program.
- #
- # Allowed values are:
- #
- # request attributes from the request
- # config attributes from the configuration items list
- # reply attributes from the reply
- # proxy-request attributes from the proxy request
- # proxy-reply attributes from the proxy reply
- #
- # Note that some attributes may not exist at some
- # stages. e.g. There may be no proxy-reply
- # attributes if this module is used in the
- # 'authorize' section.
- #
- input_pairs = request
-
- #
- # Where to place the output attributes (if any) from
- # the executed program. The values allowed, and the
- # restrictions as to availability, are the same as
- # for the input_pairs.
- #
- output_pairs = reply
-
- #
- # When to execute the program. If the packet
- # type does NOT match what's listed here, then
- # the module does NOT execute the program.
- #
- # For a list of allowed packet types, see
- # the 'dictionary' file, and look for VALUEs
- # of the Packet-Type attribute.
- #
- # By default, the module executes on ANY packet.
- # Un-comment out the following line to tell the
- # module to execute only if an Access-Accept is
- # being sent to the NAS.
- #
- #packet_type = Access-Accept
-
- #
- # Should we escape the environment variables?
- #
- # If this is set, all the RADIUS attributes
- # are capitalised and dashes replaced with
- # underscores. Also, RADIUS values are surrounded
- # with double-quotes.
- #
- # That is to say: User-Name=BobUser => USER_NAME="BobUser"
- shell_escape = yes
-
- }
-
- # Do server side ip pool management. Should be added in post-auth and
- # accounting sections.
- #
- # The module also requires the existance of the Pool-Name
- # attribute. That way the administrator can add the Pool-Name
- # attribute in the user profiles and use different pools
- # for different users. The Pool-Name attribute is a *check* item not
- # a reply item.
- # The Pool-Name should be set to the ippool module instance name or to
- # DEFAULT to match any module.
- #
- # Example:
- # radiusd.conf: ippool students { [...] }
- # ippool teachers { [...] }
- # users file : DEFAULT Group == students, Pool-Name := "students"
- # DEFAULT Group == teachers, Pool-Name := "teachers"
- # DEFAULT Group == other, Pool-Name := "DEFAULT"
- #
- # ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST *********
- # ********* THEN ERASE THE DB FILES *********
- #
- ippool main_pool {
-
- # range-start,range-stop: The start and end ip
- # addresses for the ip pool
- range-start = 192.168.1.1
- range-stop = 192.168.3.254
-
- # netmask: The network mask used for the ip's
- netmask = 255.255.255.0
-
- # cache-size: The gdbm cache size for the db
- # files. Should be equal to the number of ip's
- # available in the ip pool
- cache-size = 800
-
- # session-db: The main db file used to allocate ip's to clients
- session-db = ${raddbdir}/db.ippool
-
- # ip-index: Helper db index file used in multilink
- ip-index = ${raddbdir}/db.ipindex
-
- # override: Will this ippool override a Framed-IP-Address already set
- override = no
-
- # maximum-timeout: If not zero specifies the maximum time in seconds an
- # entry may be active. Default: 0
- maximum-timeout = 0
-
- # The key to use for the session database (which holds the allocated ip's)
- # normally it should just be the nas ip/port (which is the default)
- #key = "%{NAS-IP-Address} %{NAS-Port}"
- }
-
- # $INCLUDE ${confdir}/sqlippool.conf
-
- # OTP token support. Not included by default.
- # $INCLUDE ${confdir}/otp.conf
-
- #
- # Implements Login-Time, Current-Time, and Time-Of-Day
- #
- logintime {
- #
- # Don't worry about anything here for now..
- #
- }
-
- #
- # Kerberos. See doc/rlm_krb5 for minimal docs.
- #
-# krb5 {
-# keytab = /path/to/keytab
-# service_principal = name_of_principle
-# }
+ $INCLUDE mods-enabled/
}
# Instantiation
# of the following sections, so they can be listed here.
#
# Also, listing modules here ensures that you have control over
-# the order in which they are initalized. If one module needs
+# the order in which they are initialized. If one module needs
# something defined by another module, you can list them in order
# here, and ensure that the configuration will be OK.
#
+# After the modules listed here have been loaded, all of the modules
+# in the "mods-enabled" directory will be loaded. Loading the
+# "mods-enabled" directory means that unlike Version 2, you usually
+# don't need to list modules here.
+#
instantiate {
#
- # Allows the execution of external scripts.
- # The entire command line (and output) must fit into 253 bytes.
- #
- # e.g. Framed-Pool = `%{exec:/bin/echo foo}`
- exec
-
- #
- # The expression module doesn't do authorization,
- # authentication, or accounting. It only does dynamic
- # translation, of the form:
- #
- # Session-Timeout = `%{expr:2 + 3}`
- #
- # So the module needs to be instantiated, but CANNOT be
- # listed in any other section. See 'doc/rlm_expr' for
- # more information.
- #
- expr
-
- #
- # We add the counter module here so that it registers
- # the check-name attribute before any module which sets
+ # We list the counter module here so that it registers
+ # the check_name attribute before any module which sets
# it
# daily
- expiration
- logintime
# subsections here can be thought of as "virtual" modules.
#
# lines, and list "redundant_sql" in the authorize and
# accounting sections.
#
+ # The "virtual" module defined here can also be used with
+ # dynamic expansions, under a few conditions:
+ #
+ # * The section is "redundant", or "load-balance", or
+ # "redundant-load-balance"
+ # * The section contains modules ONLY, and no sub-sections
+ # * all modules in the section are using the same rlm_
+ # driver, e.g. They are all sql, or all ldap, etc.
+ #
+ # When those conditions are satisfied, the server will
+ # automatically register a dynamic expansion, using the
+ # name of the "virtual" module. In the example below,
+ # it will be "redundant_sql". You can then use this expansion
+ # just like any other:
+ #
+ # update reply {
+ # Filter-Id := "%{redundant_sql: ... }"
+ # }
+ #
+ # In this example, the expansion is done via module "sql1",
+ # and if that expansion fails, using module "sql2".
+ #
+ # For best results, configure the "pool" subsection of the
+ # module so that "retry_delay" is non-zero. That will allow
+ # the redundant block to quickly ignore all "down" SQL
+ # databases. If instead we have "retry_delay = 0", then
+ # every time the redundant block is used, the server will try
+ # to open a connection to every "down" database, causing
+ # problems.
+ #
#redundant redundant_sql {
# sql1
# sql2
######################################################################
#
-# As of 2.0.0, the "authorize", "authenticate", etc. sections
-# are in separate configuration files, per virtual host.
+# Policies are virtual modules, similar to those defined in the
+# "instantiate" section above.
#
+# Defining a policy in one of the policy.d files means that it can be
+# referenced in multiple places as a *name*, rather than as a series of
+# conditions to match, and actions to take.
+#
+# Policies are something like subroutines in a normal language, but
+# they cannot be called recursively. They MUST be defined in order.
+# If policy A calls policy B, then B MUST be defined before A.
+#
+######################################################################
+policy {
+ $INCLUDE policy.d/
+}
+
######################################################################
+#
+# Load virtual servers.
+#
+# This next $INCLUDE line loads files in the directory that
+# match the regular expression: /[a-zA-Z0-9_.]+/
+#
+# It allows you to define new virtual servers simply by placing
+# a file into the raddb/sites-enabled/ directory.
+#
+$INCLUDE sites-enabled/
######################################################################
#
-# Include all enabled virtual hosts.
+# All of the other configuration sections like "authorize {}",
+# "authenticate {}", "accounting {}", have been moved to the
+# the file:
#
-# The following directory is searched for files that match
-# the regex:
+# raddb/sites-available/default
#
-# /[a-zA-Z0-9_.]+/
+# This is the "default" virtual server that has the same
+# configuration as in version 1.0.x and 1.1.x. The default
+# installation enables this virtual server. You should
+# edit it to create policies for your local site.
#
-# The files are then included here, just as if they were cut
-# and pasted into this file.
+# For more documentation on virtual servers, see:
#
-# See "sites-enabled/default" for some additional documentation.
+# raddb/sites-available/README
#
-$INCLUDE ${confdir}/sites-enabled/
+######################################################################