#Master config file, must be in /etc/radsecproxy or proxy's current directory
# All possible config options are listed below
+
+# First you may define any global options, these are:
+#
+# You can optionally specify addresses and ports to listen on
+# Max one of each, below are just multiple examples
+#ListenUDP *:1814
+#listenUDP localhost
+#listenTCP 10.10.10.10:2084
+#ListenTCP [2001:700:1:7:215:f2ff:fe35:307d]:2084
+# Optional log level. 3 is default, 1 is less, 4 is more
+#LogLevel 3
+#Optional LogDestinatinon, else stderr used for logging
+# Logging to file
+#LogDestination file:///tmp/rp.log
+# Or logging with Syslog. LOG_DAEMON used if facility not specified
+# The supported facilities are LOG_DAEMON, LOG_MAIL, LOG_USER and
+# LOG_LOCAL0, ..., LOG_LOCAL7
+#LogDestination x-syslog:///
+#LogDestination x-syslog:///log_local2
+
+#If we have TLS clients or servers we must define at least one tls block.
+#You can name them whatever you like and then reference them by name when
+#specifying clients or servers later. There are however three special names
+#"default", "defaultclient" and "defaultserver". If no name is defined for
+#a client, the "defaultclient" block will be used if it exists, if not the
+#"default" will be used. For a server, "defaultserver" followed by "default"
+#will be checked.
#
-# You must specify at least one of TLSCACertificateFile or TLSCACertificatePath
-# for TLS to work. We always verify peer certificate (both client and server)
-#TLSCACertificateFile /etc/cacerts/CA.pem
-TLSCACertificatePath /etc/cacerts
+#The simplest configuration you can do is:
+tls default {
+ # You must specify at least one of CACertificateFile or CACertificatePath
+ # for TLS to work. We always verify peer certificate (client and server)
+ # CACertificateFile /etc/cacerts/CA.pem
+ CACertificatePath /etc/cacerts
+
+ # You must specify the below for TLS, we always present our certificate
+ CertificateFile /etc/hostcertkey/host.example.com.pem
+ CertificateKeyFile /etc/hostcertkey/host.example.com.key.pem
+ # Optionally specify password if key is encrypted (not very secure)
+ CertificateKeyPassword "follow the white rabbit"
+}
+
+#If you want one cert for all clients and another for all servers, use
+#defaultclient and defaultserver instead of default. If we wanted some
+#particular server to use something else you could specify a block
+#"tls myserver" and then reference that for that server. If you always
+#name the tls block in the client/server config you don't need a default
+
+#Now we configure clients, servers and realms. Note that these and
+#also the lines above may be in any order, except that a realm
+#can only be configured to use a server that is previously configured.
+
+#A realm can be a literal domain name, * which matches all, or a
+#regexp. A regexp is specified by the character prefix /
+#For regexp we do case insensitive matching of the entire username string.
+#The matching of realms is done in the order they are specified, using the
+#first match found. Some examples are
+#"@example\.com$", "\.com$", ".*" and "^[a-z].*@example\.com$".
+#To treat local users separately you might try first specifying "@"
+#and after that "*".
+
+client 2001:db8::1 {
+ type tls
+ secret verysecret
+#we could specify tls here, e.g.
+# tls myclient
+#in order to use tls parameters named myclient. We don't, so we will
+#use "tls defaultclient" if defined, or look for "tls default" as a
+#last resort
+}
+client 127.0.0.1 {
+ type udp
+ secret secret
+}
+client radius.example.com {
+ type TLS
+# secret is optional for TLS
+}
+
+server 127.0.0.1 {
+ type UDP
+ secret secret
+}
+realm eduroam.cc {
+ server 127.0.0.1
+}
-# You must specify the below for TLS, we will always present our certificate
-TLSCertificateFile /etc/hostcertkey/host.example.com.pem
-TLSCertificateKeyFile /etc/hostcertkey/host.example.com.key.pem
+server 2001:db8::1 {
+ type TLS
+ port 2283
+# secret is optional for TLS
+#we could specify tls here, e.g.
+# tls myserver
+#in order to use tls parameters named myserver. We don't, so we will
+#use "tls defaultserver" if defined, or look for "tls default" as a
+#last resort
+}
+server radius.example.com {
+ type tls
+ secret verysecret
+ StatusServer on
+# statusserver is optional, can be on or off. Off is default
+}
-# You can optionally specify a non-standard UDP port to listen
-#UDPServerPort 1814
+# Equivalent to example.com
+realm /@example\.com$ {
+ server 2001:db8::1
+}
+# One can define a realm without servers, the proxy will then reject
+# and requests matching this. Optionally one can specify ReplyMessage
+# attribute to be included in the reject message.
+#
+realm /\.com$ {
+}
+realm /^anonymous$ {
+ replymessage "No Access"
+}
+# The realm below is equivalent to /.*
+realm * {
+ server radius.example.com
+}
+#If you don't have a default server you probably want to
+#reject all unknowns. Optionally you can also include a message
+#realm * {
+# replymessage "User unknown"
+#}
projects / radsecproxy.git / blobdiff