-Summary: High-performance and highly configurable RADIUS server
-URL: http://www.freeradius.org/
+Summary: High-performance and highly configurable free RADIUS server
Name: freeradius
-Version: 1.0.0
-Release: 1
-License: GPL
-Group: Networking/Daemons
-Packager: FreeRADIUS.org
-Source0: %{name}-%{version}.tar.gz
-Prereq: /sbin/chkconfig
-BuildPreReq: libtool
-# FIXME: snmpwalk, snmpget and rusers POSSIBLY needed by checkrad
-Provides: radiusd
-Conflicts: cistron-radius
-BuildRoot: %{_tmppath}/%{name}-root
+Version: 2.2.0
+Release: 1%{?dist}
+License: GPLv2+ and LGPLv2+
+Group: System Environment/Daemons
+URL: http://www.freeradius.org/
+
+Source0: ftp://ftp.freeradius.org/pub/radius/freeradius-server-%{version}.tar.bz2
+Source100: freeradius-radiusd-init
+Source102: freeradius-logrotate
+Source103: freeradius-pam-conf
+
+Patch1: freeradius-cert-config.patch
+
+Obsoletes: freeradius-devel
+Obsoletes: freeradius-libs
+
+%define docdir %{_docdir}/freeradius-%{version}
+%define initddir %{?_initddir:%{_initddir}}%{!?_initddir:%{_initrddir}}
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+
+BuildRequires: autoconf
+BuildRequires: gdbm-devel
+BuildRequires: libtool
+BuildRequires: libtool-ltdl-devel
+BuildRequires: openssl-devel
+BuildRequires: pam-devel
+BuildRequires: zlib-devel
+BuildRequires: net-snmp-devel
+BuildRequires: net-snmp-utils
+BuildRequires: readline-devel
+BuildRequires: libpcap-devel
+
+Requires(pre): shadow-utils glibc-common
+Requires(post): /sbin/chkconfig
+Requires(preun): /sbin/chkconfig
%description
-The FreeRADIUS Server Project is a high-performance and highly
-configurable GPL'd RADIUS server. It is somewhat similar to the
-Livingston 2.0 RADIUS server, but has many more features, and is much
-more configurable.
+The FreeRADIUS Server Project is a high performance and highly configurable
+GPL'd free RADIUS server. The server is similar in some respects to
+Livingston's 2.0 server. While FreeRADIUS started as a variant of the
+Cistron RADIUS server, they don't share a lot in common any more. It now has
+many more features than Cistron or Livingston, and is much more configurable.
+
+FreeRADIUS is an Internet authentication daemon, which implements the RADIUS
+protocol, as defined in RFC 2865 (and others). It allows Network Access
+Servers (NAS boxes) to perform authentication for dial-up users. There are
+also RADIUS clients available for Web servers, firewalls, Unix logins, and
+more. Using RADIUS allows authentication and authorization for a network to
+be centralized, and minimizes the amount of re-configuration which has to be
+done when adding or deleting new users.
+
+%package utils
+Group: System Environment/Daemons
+Summary: FreeRADIUS utilities
+Requires: %{name} = %{version}-%{release}
+Requires: libpcap >= 0.9.4
+
+%description utils
+The FreeRADIUS server has a number of features found in other servers,
+and additional features not found in any other server. Rather than
+doing a feature by feature comparison, we will simply list the features
+of the server, and let you decide if they satisfy your needs.
+
+Support for RFC and VSA Attributes Additional server configuration
+attributes Selecting a particular configuration Authentication methods
+
+%package ldap
+Summary: LDAP support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+BuildRequires: openldap-devel
+
+%description ldap
+This plugin provides the LDAP support for the FreeRADIUS server project.
+
+%package krb5
+Summary: Kerberos 5 support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+BuildRequires: krb5-devel
+
+%description krb5
+This plugin provides the Kerberos 5 support for the FreeRADIUS server project.
+
+%package perl
+Summary: Perl support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version))
+%{?fedora:BuildRequires: perl-devel}
+%if 0%{?rhel} <= 5
+BuildRequires: perl
+%endif
+%if 0%{?rhel} >= 6
+BuildRequires: perl-devel
+%endif
+BuildRequires: perl(ExtUtils::Embed)
+
+%description perl
+This plugin provides the Perl support for the FreeRADIUS server project.
+
+%package python
+Summary: Python support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+BuildRequires: python-devel
+
+%description python
+This plugin provides the Python support for the FreeRADIUS server project.
-%prep
-%setup
+%package mysql
+Summary: MySQL support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+BuildRequires: mysql-devel
+
+%description mysql
+This plugin provides the MySQL support for the FreeRADIUS server project.
+
+%package postgresql
+Summary: Postgresql support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+BuildRequires: postgresql-devel
+
+%description postgresql
+This plugin provides the postgresql support for the FreeRADIUS server project.
+
+%package unixODBC
+Summary: Unix ODBC support for freeradius
+Group: System Environment/Daemons
+Requires: %{name} = %{version}-%{release}
+BuildRequires: unixODBC-devel
+
+%description unixODBC
+This plugin provides the unixODBC support for the FreeRADIUS server project.
+
+
+%prep
+%setup -q -n freeradius-server-%{version}
+%patch1 -p1 -b .cert-config
+# Some source files mistakenly have execute permissions set
+find $RPM_BUILD_DIR/freeradius-server-%{version} \( -name '*.c' -o -name '*.h' \) -a -perm /0111 -exec chmod a-x {} +
%build
-CFLAGS="$RPM_OPT_FLAGS" \
-%configure --prefix=%{_prefix} \
- --localstatedir=%{_localstatedir} \
- --sysconfdir=%{_sysconfdir} \
- --mandir=%{_mandir} \
- --with-threads \
- --with-thread-pool \
- --with-system-libtool \
- --disable-ltdl-install \
- --with-ltdl-lib=/usr/lib \
- --with-ltdl-include=/usr/include \
- --with-gnu-ld \
- --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
- --with-rlm-krb5-include-dir=/usr/kerberos/include \
- --with-rlm-krb5-lib-dir=/usr/kerberos/lib
-make
+%ifarch s390 s390x
+export CFLAGS="$RPM_OPT_FLAGS -fPIC"
+%else
+export CFLAGS="$RPM_OPT_FLAGS -fpic"
+%endif
-%install
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+%configure \
+ --libdir=%{_libdir}/freeradius \
+ --with-system-libtool \
+ --disable-ltdl-install \
+ --with-gnu-ld \
+ --with-threads \
+ --with-thread-pool \
+ --with-docdir=%{docdir} \
+ --with-rlm-sql_postgresql-include-dir=/usr/include/pgsql \
+ --with-rlm-sql-postgresql-lib-dir=%{_libdir} \
+ --with-rlm-sql_mysql-include-dir=/usr/include/mysql \
+ --with-mysql-lib-dir=%{_libdir}/mysql \
+ --with-unixodbc-lib-dir=%{_libdir} \
+ --with-rlm-dbm-lib-dir=%{_libdir} \
+ --with-rlm-krb5-include-dir=/usr/kerberos/include \
+ --with-modules="rlm_wimax" \
+ --without-rlm_eap_ikev2 \
+ --without-rlm_sql_iodbc \
+ --without-rlm_sql_firebird \
+ --without-rlm_sql_db2 \
+ --without-rlm_sql_oracle
-mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,rc.d/init.d}
+%if "%{_lib}" == "lib64"
+perl -pi -e 's:sys_lib_search_path_spec=.*:sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64":' libtool
+%endif
-make install R=$RPM_BUILD_ROOT
+make
-RADDB=$RPM_BUILD_ROOT/etc/raddb
-# set radiusd as default user/group
-perl -i -pe 's/^#user =.*$/user = radiusd/' $RADDB/radiusd.conf
+%install
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT/var/run/radiusd
+mkdir -p $RPM_BUILD_ROOT/var/lib/radiusd
+# fix for bad libtool bug - can not rebuild dependent libs and bins
+#FIXME export LD_LIBRARY_PATH=$RPM_BUILD_ROOT/%{_libdir}
+make install R=$RPM_BUILD_ROOT
+# modify default configuration
+RADDB=$RPM_BUILD_ROOT%{_sysconfdir}/raddb
+perl -i -pe 's/^#user =.*$/user = radiusd/' $RADDB/radiusd.conf
perl -i -pe 's/^#group =.*$/group = radiusd/' $RADDB/radiusd.conf
-# shadow password file MUST be defined on Linux
-perl -i -pe 's/# shadow =/shadow =/' $RADDB/radiusd.conf
+# logs
+mkdir -p $RPM_BUILD_ROOT/var/log/radius/radacct
+touch $RPM_BUILD_ROOT/var/log/radius/{radutmp,radius.log}
+
+install -D -m 755 %{SOURCE100} $RPM_BUILD_ROOT/%{initddir}/radiusd
+install -D -m 644 %{SOURCE102} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/radiusd
+install -D -m 644 %{SOURCE103} $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/radiusd
# remove unneeded stuff
-rm -f $RPM_BUILD_ROOT%{_mandir}/man8/builddbm.8
-rm -f $RPM_BUILD_ROOT%{_prefix}/sbin/rc.radiusd
+rm -rf doc/00-OLD
+rm -f $RPM_BUILD_ROOT/usr/sbin/rc.radiusd
+rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.a
+rm -rf $RPM_BUILD_ROOT/%{_libdir}/freeradius/*.la
+rm -rf $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sql/mssql
+rm -rf $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/sql/oracle
+rm -rf $RPM_BUILD_ROOT/%{_datadir}/dialup_admin/sql/oracle
+rm -rf $RPM_BUILD_ROOT/%{_datadir}/dialup_admin/lib/sql/oracle
+rm -rf $RPM_BUILD_ROOT/%{_datadir}/dialup_admin/lib/sql/drivers/oracle
+
+# remove header files, we don't ship a devel package and the
+# headers have multilib conflicts
+rm -rf $RPM_BUILD_ROOT/%{_includedir}
+
+# remove unsupported config files
+rm -f $RPM_BUILD_ROOT/%{_sysconfdir}/raddb/experimental.conf
+
+# install doc files omitted by standard install
+for f in COPYRIGHT CREDITS INSTALL README; do
+ cp $f $RPM_BUILD_ROOT/%{docdir}
+done
+cp LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.gpl
+cp src/lib/LICENSE $RPM_BUILD_ROOT/%{docdir}/LICENSE.lgpl
+cp src/LICENSE.openssl $RPM_BUILD_ROOT/%{docdir}/LICENSE.openssl
+
+# add Red Hat specific documentation
+cat >> $RPM_BUILD_ROOT/%{docdir}/REDHAT << EOF
+
+Red Hat, RHEL, Fedora, and CentOS specific information can be found on the
+FreeRADIUS Wiki in the Red Hat FAQ.
-cd redhat
-install -m 755 rc.radiusd-redhat $RPM_BUILD_ROOT/etc/rc.d/init.d/radiusd
-install -m 644 radiusd-logrotate $RPM_BUILD_ROOT/etc/logrotate.d/radiusd
-install -m 644 radiusd-pam $RPM_BUILD_ROOT/etc/pam.d/radius
-cd ..
+http://wiki.freeradius.org/Red_Hat_FAQ
+Please reference that document.
+
+EOF
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+
+
+# Make sure our user/group is present prior to any package or subpackage installation
%pre
-/usr/sbin/useradd -c "radiusd user" -r -s /bin/false -u 95 -d / radiusd 2>/dev/null || :
+getent group radiusd >/dev/null || /usr/sbin/groupadd -r -g 95 radiusd
+getent passwd radiusd >/dev/null || /usr/sbin/useradd -r -g radiusd -u 95 -c "radiusd user" -s /sbin/nologin radiusd > /dev/null 2>&1
+exit 0
+
+%post
+if [ $1 = 1 ]; then
+ /sbin/chkconfig --add radiusd
+ if [ ! -e /etc/raddb/certs/server.pem ]; then
+ /sbin/runuser -g radiusd -c 'umask 007; /etc/raddb/certs/bootstrap' > /dev/null 2>&1 || :
+ fi
+fi
%preun
-if [ "$1" = "0" ]; then
- /sbin/service radiusd stop > /dev/null 2>&1
- /sbin/chkconfig --del radiusd
+if [ $1 = 0 ]; then
+ /sbin/service radiusd stop > /dev/null 2>&1
+ /sbin/chkconfig --del radiusd
fi
-%post
-/sbin/ldconfig
-/sbin/chkconfig --add radiusd
-
-# Done here to avoid messing up existing installations
-for i in radius/radutmp radius/radwtmp radius/radius.log # radius/radwatch.log radius/checkrad.log
-do
- touch /var/log/$i
- chown radiusd:radiusd /var/log/$i
- chmod 600 /var/log/$i
-done
%postun
-if [ "$1" -ge "1" ]; then
- /sbin/service radiusd condrestart >/dev/null 2>&1
+if [ $1 -ge 1 ]; then
+ /sbin/service radiusd condrestart >/dev/null 2>&1 || :
fi
-if [ $1 = 0 ]; then
- /usr/sbin/userdel radiusd > /dev/null 2>&1 || :
-fi
-/sbin/ldconfig
-%clean
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
%files
%defattr(-,root,root)
-%doc doc/ChangeLog doc/README* todo/ COPYRIGHT INSTALL
-%config /etc/pam.d/radius
-%config /etc/logrotate.d/radiusd
-%config /etc/rc.d/init.d/radiusd
-%config (noreplace) /etc/raddb/*
-%{_bindir}/*
-%{_datadir}/%{name}
-%{_libdir}/*
-%{_mandir}/*/*
-%{_sbindir}/*
-%attr(0700,radiusd,radiusd) %dir /var/log/radius
-%attr(0700,radiusd,radiusd) %dir /var/log/radius/radacct
-%attr(0700,radiusd,radiusd) %dir /var/run/radiusd
+%doc %{docdir}/
+%config(noreplace) %{_sysconfdir}/pam.d/radiusd
+%config(noreplace) %{_sysconfdir}/logrotate.d/radiusd
+%{initddir}/radiusd
+%dir %attr(755,radiusd,radiusd) /var/lib/radiusd
+# configs
+%dir %attr(755,root,radiusd) /etc/raddb
+%defattr(-,root,radiusd)
+%attr(644,root,radiusd) %config(noreplace) /etc/raddb/dictionary
+%config(noreplace) /etc/raddb/acct_users
+%config(noreplace) /etc/raddb/attrs
+%config(noreplace) /etc/raddb/attrs.access_challenge
+%config(noreplace) /etc/raddb/attrs.access_reject
+%config(noreplace) /etc/raddb/attrs.accounting_response
+%config(noreplace) /etc/raddb/attrs.pre-proxy
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/clients.conf
+%config(noreplace) /etc/raddb/hints
+%config(noreplace) /etc/raddb/huntgroups
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/preproxy_users
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/proxy.conf
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/radiusd.conf
+%dir %attr(750,root,radiusd) /etc/raddb/sql
+#%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/oracle/*
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/users
+%dir %attr(770,root,radiusd) /etc/raddb/certs
+%config(noreplace) /etc/raddb/certs/Makefile
+%config(noreplace) /etc/raddb/certs/README
+%config(noreplace) /etc/raddb/certs/xpextensions
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/certs/*.cnf
+%attr(750,root,radiusd) /etc/raddb/certs/bootstrap
+%dir %attr(750,root,radiusd) /etc/raddb/sites-available
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-available/*
+%dir %attr(750,root,radiusd) /etc/raddb/sites-enabled
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sites-enabled/*
+%config(noreplace) %attr(640,root,radiusd) /etc/raddb/example.pl
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/policy.conf
+%config(noreplace) /etc/raddb/policy.txt
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/templates.conf
+%dir %attr(750,root,radiusd) /etc/raddb/modules
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/*
+%dir %attr(755,radiusd,radiusd) /var/run/radiusd/
+# binaries
+%defattr(-,root,root)
+/usr/sbin/checkrad
+/usr/sbin/raddebug
+/usr/sbin/radiusd
+/usr/sbin/radwatch
+/usr/sbin/radmin
+# man-pages
+%doc %{_mandir}/man5/acct_users.5.gz
+%doc %{_mandir}/man5/clients.conf.5.gz
+%doc %{_mandir}/man5/dictionary.5.gz
+%doc %{_mandir}/man5/radiusd.conf.5.gz
+%doc %{_mandir}/man5/radrelay.conf.5.gz
+%doc %{_mandir}/man5/rlm_acct_unique.5.gz
+%doc %{_mandir}/man5/rlm_always.5.gz
+%doc %{_mandir}/man5/rlm_attr_filter.5.gz
+%doc %{_mandir}/man5/rlm_attr_rewrite.5.gz
+%doc %{_mandir}/man5/rlm_chap.5.gz
+%doc %{_mandir}/man5/rlm_counter.5.gz
+%doc %{_mandir}/man5/rlm_detail.5.gz
+%doc %{_mandir}/man5/rlm_digest.5.gz
+%doc %{_mandir}/man5/rlm_expr.5.gz
+%doc %{_mandir}/man5/rlm_files.5.gz
+%doc %{_mandir}/man5/rlm_mschap.5.gz
+%doc %{_mandir}/man5/rlm_pap.5.gz
+%doc %{_mandir}/man5/rlm_passwd.5.gz
+%doc %{_mandir}/man5/rlm_policy.5.gz
+%doc %{_mandir}/man5/rlm_realm.5.gz
+%doc %{_mandir}/man5/rlm_sql.5.gz
+%doc %{_mandir}/man5/rlm_sql_log.5.gz
+%doc %{_mandir}/man5/rlm_unix.5.gz
+%doc %{_mandir}/man5/unlang.5.gz
+%doc %{_mandir}/man5/users.5.gz
+%doc %{_mandir}/man8/raddebug.8.gz
+%doc %{_mandir}/man8/radiusd.8.gz
+%doc %{_mandir}/man8/radmin.8.gz
+%doc %{_mandir}/man8/radrelay.8.gz
+%doc %{_mandir}/man8/radwatch.8.gz
+# dictionaries
+%dir %attr(755,root,root) /usr/share/freeradius
+/usr/share/freeradius/*
+# logs
+%dir %attr(700,radiusd,radiusd) /var/log/radius/
+%dir %attr(700,radiusd,radiusd) /var/log/radius/radacct/
+%ghost %attr(644,radiusd,radiusd) /var/log/radius/radutmp
+%ghost %attr(600,radiusd,radiusd) /var/log/radius/radius.log
+# RADIUS shared libs
+%attr(755,root,root) %{_libdir}/freeradius/lib*.so*
+# RADIUS Loadable Modules
+%dir %attr(755,root,root) %{_libdir}/freeradius
+#%attr(755,root,root) %{_libdir}/freeradius/rlm_*.so*
+#%{_libdir}/freeradius/rlm_acctlog*.so
+%{_libdir}/freeradius/rlm_acct_unique.so
+%{_libdir}/freeradius/rlm_acct_unique-%{version}.so
+%{_libdir}/freeradius/rlm_acctlog.so
+%{_libdir}/freeradius/rlm_acctlog-%{version}.so
+%{_libdir}/freeradius/rlm_always.so
+%{_libdir}/freeradius/rlm_always-%{version}.so
+%{_libdir}/freeradius/rlm_attr_filter.so
+%{_libdir}/freeradius/rlm_attr_filter-%{version}.so
+%{_libdir}/freeradius/rlm_attr_rewrite.so
+%{_libdir}/freeradius/rlm_attr_rewrite-%{version}.so
+%{_libdir}/freeradius/rlm_chap.so
+%{_libdir}/freeradius/rlm_chap-%{version}.so
+%{_libdir}/freeradius/rlm_checkval.so
+%{_libdir}/freeradius/rlm_checkval-%{version}.so
+%{_libdir}/freeradius/rlm_copy_packet.so
+%{_libdir}/freeradius/rlm_copy_packet-%{version}.so
+%{_libdir}/freeradius/rlm_counter.so
+%{_libdir}/freeradius/rlm_counter-%{version}.so
+%{_libdir}/freeradius/rlm_dbm.so
+%{_libdir}/freeradius/rlm_dbm-%{version}.so
+%{_libdir}/freeradius/rlm_detail.so
+%{_libdir}/freeradius/rlm_detail-%{version}.so
+%{_libdir}/freeradius/rlm_digest.so
+%{_libdir}/freeradius/rlm_digest-%{version}.so
+%{_libdir}/freeradius/rlm_dynamic_clients.so
+%{_libdir}/freeradius/rlm_dynamic_clients-%{version}.so
+%{_libdir}/freeradius/rlm_eap.so
+%{_libdir}/freeradius/rlm_eap-%{version}.so
+%{_libdir}/freeradius/rlm_eap_gtc.so
+%{_libdir}/freeradius/rlm_eap_gtc-%{version}.so
+%{_libdir}/freeradius/rlm_eap_leap.so
+%{_libdir}/freeradius/rlm_eap_leap-%{version}.so
+%{_libdir}/freeradius/rlm_eap_md5.so
+%{_libdir}/freeradius/rlm_eap_md5-%{version}.so
+%{_libdir}/freeradius/rlm_eap_mschapv2.so
+%{_libdir}/freeradius/rlm_eap_mschapv2-%{version}.so
+%{_libdir}/freeradius/rlm_eap_peap.so
+%{_libdir}/freeradius/rlm_eap_peap-%{version}.so
+%{_libdir}/freeradius/rlm_eap_sim.so
+%{_libdir}/freeradius/rlm_eap_sim-%{version}.so
+%{_libdir}/freeradius/rlm_eap_tls.so
+%{_libdir}/freeradius/rlm_eap_tls-%{version}.so
+%{_libdir}/freeradius/rlm_eap_ttls.so
+%{_libdir}/freeradius/rlm_eap_ttls-%{version}.so
+%{_libdir}/freeradius/rlm_exec.so
+%{_libdir}/freeradius/rlm_exec-%{version}.so
+%{_libdir}/freeradius/rlm_expiration.so
+%{_libdir}/freeradius/rlm_expiration-%{version}.so
+%{_libdir}/freeradius/rlm_expr.so
+%{_libdir}/freeradius/rlm_expr-%{version}.so
+%{_libdir}/freeradius/rlm_fastusers.so
+%{_libdir}/freeradius/rlm_fastusers-%{version}.so
+%{_libdir}/freeradius/rlm_files.so
+%{_libdir}/freeradius/rlm_files-%{version}.so
+%{_libdir}/freeradius/rlm_ippool.so
+%{_libdir}/freeradius/rlm_ippool-%{version}.so
+%{_libdir}/freeradius/rlm_linelog.so
+%{_libdir}/freeradius/rlm_linelog-%{version}.so
+%{_libdir}/freeradius/rlm_logintime.so
+%{_libdir}/freeradius/rlm_logintime-%{version}.so
+%{_libdir}/freeradius/rlm_mschap.so
+%{_libdir}/freeradius/rlm_mschap-%{version}.so
+%{_libdir}/freeradius/rlm_otp.so
+%{_libdir}/freeradius/rlm_otp-%{version}.so
+%{_libdir}/freeradius/rlm_pam.so
+%{_libdir}/freeradius/rlm_pam-%{version}.so
+%{_libdir}/freeradius/rlm_pap.so
+%{_libdir}/freeradius/rlm_pap-%{version}.so
+%{_libdir}/freeradius/rlm_passwd.so
+%{_libdir}/freeradius/rlm_passwd-%{version}.so
+%{_libdir}/freeradius/rlm_policy.so
+%{_libdir}/freeradius/rlm_policy-%{version}.so
+%{_libdir}/freeradius/rlm_preprocess.so
+%{_libdir}/freeradius/rlm_preprocess-%{version}.so
+%{_libdir}/freeradius/rlm_radutmp.so
+%{_libdir}/freeradius/rlm_radutmp-%{version}.so
+%{_libdir}/freeradius/rlm_realm.so
+%{_libdir}/freeradius/rlm_realm-%{version}.so
+%{_libdir}/freeradius/rlm_replicate.so
+%{_libdir}/freeradius/rlm_replicate-%{version}.so
+%{_libdir}/freeradius/rlm_soh.so
+%{_libdir}/freeradius/rlm_soh-%{version}.so
+%{_libdir}/freeradius/rlm_sql.so
+%{_libdir}/freeradius/rlm_sql-%{version}.so
+%{_libdir}/freeradius/rlm_sql_log.so
+%{_libdir}/freeradius/rlm_sql_log-%{version}.so
+%{_libdir}/freeradius/rlm_sqlcounter.so
+%{_libdir}/freeradius/rlm_sqlcounter-%{version}.so
+%{_libdir}/freeradius/rlm_sqlippool.so
+%{_libdir}/freeradius/rlm_sqlippool-%{version}.so
+%{_libdir}/freeradius/rlm_unix.so
+%{_libdir}/freeradius/rlm_unix-%{version}.so
+%{_libdir}/freeradius/rlm_wimax.so
+%{_libdir}/freeradius/rlm_wimax-%{version}.so
+
+%files utils
+%defattr(-,root,root)
+/usr/bin/*
+# man-pages
+%doc %{_mandir}/man1/radclient.1.gz
+%doc %{_mandir}/man1/radeapclient.1.gz
+%doc %{_mandir}/man1/radlast.1.gz
+%doc %{_mandir}/man1/radtest.1.gz
+%doc %{_mandir}/man1/radwho.1.gz
+%doc %{_mandir}/man1/radzap.1.gz
+%doc %{_mandir}/man8/radsqlrelay.8.gz
+%doc %{_mandir}/man8/rlm_ippool_tool.8.gz
+
+%files krb5
+%defattr(-,root,root)
+%{_libdir}/freeradius/rlm_krb5.so
+%{_libdir}/freeradius/rlm_krb5-%{version}.so
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/krb5
+
+%files perl
+%defattr(-,root,root)
+%{_libdir}/freeradius/rlm_perl.so
+%{_libdir}/freeradius/rlm_perl-%{version}.so
+
+%files python
+%defattr(-,root,root)
+%{_libdir}/freeradius/rlm_python.so
+%{_libdir}/freeradius/rlm_python-%{version}.so
+
+%files mysql
+%defattr(-,root,root)
+%dir %attr(750,root,radiusd) /etc/raddb/sql/mysql
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/mysql/*
+%dir %attr(750,root,radiusd) /etc/raddb/sql/ndb
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/ndb/*
+%{_libdir}/freeradius/rlm_sql_mysql.so
+%{_libdir}/freeradius/rlm_sql_mysql-%{version}.so
+
+%files postgresql
+%defattr(-,root,root)
+%dir %attr(750,root,radiusd) /etc/raddb/sql/postgresql
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/sql/postgresql/*
+%{_libdir}/freeradius/rlm_sql_postgresql.so
+%{_libdir}/freeradius/rlm_sql_postgresql-%{version}.so
+
+%files ldap
+%defattr(-,root,root)
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/ldap.attrmap
+%{_libdir}/freeradius/rlm_ldap.so
+%{_libdir}/freeradius/rlm_ldap-%{version}.so
+%attr(640,root,radiusd) %config(noreplace) /etc/raddb/modules/ldap
+
+%files unixODBC
+%defattr(-,root,root)
+%{_libdir}/freeradius/rlm_sql_unixodbc.so
+%{_libdir}/freeradius/rlm_sql_unixodbc-%{version}.so
%changelog
-* Mon May 31 2004 Paul Hampson
-- update for 1.0.0 release
+* Wed Sep 22 2010 John Dennis <jdennis@redhat.com> - 2.1.10-1
+- upgrade to latest upstream release
+ Feature improvements
+ * Install the "radcrypt" program.
+ * Enable radclient to send requests containing MS-CHAPv1
+ Send packets with: MS-CHAP-Password = "password". It will
+ be automatically converted to the correct MS-CHAP attributes.
+ * Added "-t" command-line option to radtest. You can use "-t pap",
+ "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap"
+ * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120
+ This change and the previous one makes PEAP testing much easier.
+ * Added more documentation and examples for the "passwd" module.
+ * Added dictionaries for RFC 5607 and RFC 5904.
+ * Added note in proxy.conf that we recommend setting
+ "require_message_authenticator = yes" for all home servers.
+ * Added example of second "files" configuration, with documentation.
+ This shows how and where to use two instances of a module.
+ * Updated radsniff to have it write pcap files, too. See '-w'.
+ * Print out large WARNING message if we send an Access-Challenge
+ for EAP, and receive no follow-up messages from the client.
+ * Added Cached-Session-Policy for EAP session resumption. See
+ raddb/eap.conf.
+ * Added support for TLS-Cert-* attributes. For details, see
+ raddb/sites-available/default, "post-auth" section.
+ * Added sample raddb/modules/{opendirectory,dynamic_clients}
+ * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries.
+ * Added RFCs 5607, 5904, and 5997.
+ * For EAP-TLS, client certificates can now be validated using an
+ external command. See eap.conf, "validate" subsection of "tls".
+ * Made rlm_pap aware of {nthash} prefix, for compatibility with
+ legacy RADIUS systems.
+ * Add Module-Failure-Message for mschap module (ntlm_auth)
+ * made rlm_sql_sqlite database configurable. Use "filename"
+ in sql{} section.
+ * Added %{tolower: ...string ... }, which returns the lowercase
+ version of the string.
+
+ Bug fixes
+ * Fix endless loop when there are multiple sub-options for
+ DHCP option 82.
+ * More debug output when sending / receiving DHCP packets.
+ * EAP-MSCHAPv2 should return the MPPE keys when used outside
+ of a TLS tunnel. This is needed for IKE.
+ * Added SSL "no ticket" option to prevent SSL from creating sessions
+ without IDs. We need the IDs, so this option should be set.
+ * Fix proxying of packets from inside a TTLS/PEAP tunnel.
+ Closes bug #25.
+ * Allow IPv6 address attributes to be created from domain names
+ Closes bug #82.
+ * Set the string length to the correct value when parsing double
+ quotes. Closes bug #88.
+ * No longer look users up in /etc/passwd in the default configuration.
+ This can be reverted by enabling "unix" in the "authorize" section.
+ * More #ifdef's to enable building on systems without certain
+ features.
+ * Fixed SQL-Group comparison to register only if the group
+ query is defined.
+ * Fixed SQL-Group comparison to register <instance>-SQL-Group,
+ just like rlm_ldap. This lets you have multiple SQL group checks.
+ * Fix scanning of octal numbers in "unlang". Closes bug #89.
+ * Be less aggressive about freeing "stuck" requests. Closes bug #35.
+ * Fix example in "originate-coa" to refer to the correct packet.
+ * Change default timeout for dynamic clients to 1 hour, not 1 day.
+ * Allow passwd module to map IP addresses, too.
+ * Allow passwd module to be used for CoA packets
+ * Put boot filename into DHCP header when DHCP-Boot-Filename
+ is specified.
+ * raddb/certs/Makefile no longer has certs depend on index.txt and
+ serial. Closes bug #64.
+ * Ignore NULL errorcode in PostgreSQL client. Closes bug #39
+ * Made Exec-Program and Exec-Program-Wait work in accounting
+ section again. See sites-available/default.
+ * Fix long-standing memory leak in esoteric conditions. Found
+ by Jerry Nichols.
+ * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap
+ This will automatically convert more passwords.
+ * Updated rlm_pap to decode Password-With-Header, if it was base64
+ encoded, and to treat the contents as potentially binary data.
+ * Fix Novell eDir code to use the right function parameters.
+ Closes bug #86.
+ * Allow spaces to be escaped when executing external programs.
+ Closes bug #93.
+ * Be less restrictive about checking permissions on control socket.
+ If we're root, allow connecting to a non-root socket.
+ * Remove control socket on normal server exit. If the server isn't
+ running, the control socket should not exist.
+ * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP
+ calculations. It *MAY* be different (upper / lower case) from
+ the User-Name attribute. Closes bug #17.
+ * If the EAP-TLS methods have problems, more SSL errors are now
+ available in the Module-Failure-Message attribute.
+ * Update Oracle configure scripts. Closes bug #57.
+ * Added text to DESC fields of doc/examples/openldap.schema
+ * Updated more documentation to use "Restructured Text" format.
+ Thanks to James Lockie.
+ * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11.
+ * Return error for potential proxy loops when using "-XC"
+ * Produce better error messages when slow databases block
+ the server.
+ * Added notes on DHCP broadcast packets for FreeBSD.
+ * Fixed crash when parsing some date strings. Closes bug #98
+ * Improperly formatted Attributes are now printed as "Attr-##".
+ If they are not correct, they should not use the dictionary name.
+ * Fix rlm_digest to be check the format of the Digest attributes,
+ and return "noop" rather than "fail" if they're not right.
+ * Enable "digest" in raddb/sites-available/default. This change
+ enables digest authentication to work "out of the box".
+ * Be less aggressive about marking home servers as zombie.
+ If they are responding to some packets, they are still alive.
+ * Added Packet-Transmit-Counter, to track detail file retransmits.
+ Closes bug #13.
+ * Added configure check for lt_dladvise_init(). If it exists, then
+ using it solves some issues related to libraries loading libraries.
+ * Added indexes to the MySQL IP Pool schema.
+ * Print WARNING message if too many attributes are put into a packet.
+ * Include dhcp test client (not built by default)
+ * Added checks for LDAP constraint violation. Closes bug #18.
+ * Change default raddebug timeout to 60 seconds.
+ * Made error / warning messages more consistent.
+ * Correct back-slash handling in variable expansion. Closes bug #46.
+ You SHOULD check your configuration for backslash expansion!
+ * Fix typo in "configure" script (--enable-libltdl-install)
+ * Use local libltdl in more situations. This helps to avoid
+ compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols.
+ * Fix hang on startup when multiple home servers were defined
+ with "src_ipaddr" field.
+ * Fix 32/64 bit issue in rlm_ldap. Closes bug #105.
+ * If the first "listen" section uses 127.0.0.1, don't use that
+ as the source IP for proxying. It won't work.
+ * When Proxy-To-Realm is set to a non-existent realm, the EAP module
+ should handle the request, rather than expecting it to be proxied.
+ * Fix IPv4 issues with udpfromto. Closes bug #110.
+ * Clean up child processes of raddebug. Closes bugs #108 and #109
+ * retry OTP if the OTP daemon fails. Closes bug #58.
+ * Multiple calls to ber_printf seem to work better. Closes #106.
+ * Fix "unlang" so that "attribute not found" is treated as a "false"
+ comparison, rather than a syntax error in the configuration.
+
+
+* Sat Jul 31 2010 Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> - 2.1.9-3
+- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
+
+* Tue Jun 01 2010 Marcela Maslanova <mmaslano@redhat.com> - 2.1.9-2
+- Mass rebuild with perl-5.12.0
+
+* Mon May 24 2010 John Dennis <jdennis@redhat.com> - 2.1.9-1
+- update to latest upstream, mainly bug fix release
+ Feature improvements
+ * Add radmin command "stats detail <file>" to see what
+ is going on inside of a detail file reader.
+ * Added documentation for CoA. See raddb/sites-available/coa
+ * Add sub-option support for Option 82. See dictionary.dhcp
+ * Add "server" field to default SQL NAS table, and documented it.
+
+ Bug fixes
+ * Reset "received ping" counter for Status-Server checks. In some
+ corner cases it was not getting reset.
+ * Handle large VMPS attributes.
+ * Count accounting responses from a home server in SNMP / statistics
+ code.
+ * Set EAP-Session-Resumed = Yes, not "No" when session is resumed.
+ * radmin packet counter statistics are now unsigned, for numbers
+ 2^31..2^32. After that they roll over to zero.
+ * Be more careful about expanding data in PAP and MS-CHAP modules.
+ This prevents login failures when passwords contain '{'.
+ * Clean up zombie children if there were many "exec" modules being
+ run for one packet, all with "wait = no".
+ * re-open log file after HUP. Closes bug #63.
+ * Fix "no response to proxied packet" complaint for Coa / Disconnect
+ packets. It shouldn't ignore replies to packets it sent.
+ * Calculate IPv6 netmasks correctly. Closes bug #69.
+ * Fix SQL module to re-open sockets if they unexpectedly close.
+ * Track scope for IPv6 addresses. This lets us use link-local
+ addresses properly. Closes bug #70.
+ * Updated Makefiles to no longer use the shell for recursing into
+ subdirs. "make -j 2" should now work.
+ * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes
+ bug #75.
+ * Updated Makefiles so that "make reconfig" no longer uses the shell
+ for recursing into subdirs, and re-builds all "configure" files.
+ * Used above method to regenerate all configure scripts.
+ Closes bug #34.
+ * Updated SQL module to allow "server" field of "nas" table
+ to be blank: "". This means the same as it being NULL.
+ * Fixed regex realm example. Create Realm attribute with value
+ of realm from User-Name, not from regex. Closes bug #40.
+ * If processing a DHCP Discover returns "fail / reject", ignore
+ the packet rather than sending a NAK.
+ * Allow '%' to be escaped in sqlcounter module.
+ * Fix typo internal hash table.
+ * For PEAP and TTLS, the tunneled reply is added to the reply,
+ rather than integrated via the operators. This allows multiple
+ VSAs to be added, where they would previously be discarded.
+ * Make request number unsigned. This changes nothing other than
+ the debug output when the server receives more than 2^31 packets.
+ * Don't block when reading child output in 'exec wait'. This means
+ that blocked children get killed, instead of blocking the server.
+ * Enabled building without any proxy functionality
+ * radclient now prefers IPv4, to match the default server config.
+ * Print useful error when a realm regex is invalid
+ * relaxed rules for preprocess module "with_cisco_vsa_hack". The
+ attributes can now be integer, ipaddr, etc. (i.e. non-string)
+ * Allow rlm_ldap to build if ldap_set_rebind_proc() has only
+ 2 arguments.
+ * Update configure script for rlm_python to avoid dynamic linking
+ problems on some platforms.
+ * Work-around for bug #35
+ * Do suid to "user" when running in debug mode as root
+ * Make "allow_core_dumps" work in more situations.
+ * In detail file reader, treat bad records as EOF.
+ This allows it to continue working when the disk is full.
+ * Fix Oracle default accounting queries to work when there are no
+ gigawords attributes. Other databases already had the fix.
+ * Fix rlm_sql to show when it opens and closes sockets. It already
+ says when it cannot connect, so it should say when it can connect.
+ * "chmod -x" for a few C source files.
+ * Pull update spec files, etc. from RedHat into the redhat/ directory.
+ * Allow spaces when parsing integer values. This helps people who
+ put "too much" into an SQL value field.
+
+* Thu Jan 7 2010 John Dennis <jdennis@redhat.com> - 2.1.8-2
+- resolves: bug #526559 initial install should run bootstrap to create certificates
+ running radiusd in debug mode to generate inital temporary certificates
+ is no longer necessary, the /etc/raddb/certs/bootstrap is invoked on initial
+ rpm install (not upgrade) if there is no existing /etc/raddb/certs/server.pem file
+- resolves: bug #528493 use sha1 algorithm instead of md5 during cert generation
+ the certificate configuration (/etc/raddb/certs/{ca,server,client}.cnf) files
+ were modifed to use sha1 instead of md5 and the validity reduced from 1 year to 2 months
+
+* Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.8-1
+- update to latest upstream
+ Feature improvements
+ * Print more descriptive error message for too many EAP sessions.
+ This gives hints on what to do when "failed to store handler"
+ * Commands received from radmin are now printed on stdout when
+ in debugging mode.
+ * Allow accounting packets to be written to a detail file, even
+ if they were read from a different detail file.
+ * Added OpenSSL license exception (src/LICENSE.openssl)
+
+ Bug fixes
+ * DHCP sockets can now set the broadcast flag before binding to a
+ socket. You need to set "broadcast = yes" in the DHCP listener.
+ * Be more restrictive on string parsing in the config files
+ * Fix password length in scripts/create-users.pl
+ * Be more flexible about parsing the detail file. This allows
+ it to read files where the attributes have been edited.
+ * Ensure that requests read from the detail file are cleaned up
+ (i.e. don't leak) if they are proxied without a response.
+ * Write the PID file after opening sockets, not before
+ (closes bug #29)
+ * Proxying large numbers of packets no longer gives error
+ "unable to open proxy socket".
+ * Avoid mutex locks in libc after fork
+ * Retry packet from detail file if there was no response.
+ * Allow old-style dictionary formats, where the vendor name is the
+ last field in an ATTRIBUTE definition.
+ * Removed all recursive use of mutexes. Some systems just don't
+ support this.
+ * Allow !* to work as documented.
+ * make templates work (see templates.conf)
+ * Enabled "allow_core_dumps" to work again
+ * Print better errors when reading invalid dictionaries
+ * Sign client certificates with CA, rather than server certs.
+ * Fix potential crash in rlm_passwd when file was closed
+ * Fixed corner cases in conditional dynamic expansion.
+ * Use InnoDB for MySQL IP Pools, to gain transactional support
+ * Apply patch to libltdl for CVE-2009-3736.
+ * Fixed a few issues found by LLVM's static checker
+ * Keep track of "bad authenticators" for accounting packets
+ * Keep track of "dropped packets" for auth/acct packets
+ * Synced the "debian" directory with upstream
+ * Made "unlang" use unsigned 32-bit integers, to match the
+ dictionaries.
+
+* Wed Dec 30 2009 John Dennis <jdennis@redhat.com> - 2.1.7-7
+- Remove devel subpackage. It doesn't make much sense to have a devel package since
+ we don't ship libraries and it produces multilib conflicts.
+
+* Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-6
+- more spec file clean up from review comments
+- remove freeradius-libs subpackage, move libfreeradius-eap and
+ libfreeradius-radius into the main package
+- fix subpackage requires, change from freeradius-libs to main package
+- fix description of the devel subpackage, remove referene to non-shipped libs
+- remove execute permissions on src files included in debuginfo
+- remove unnecessary use of ldconfig
+- since all sub-packages now require main package remove user creation for sub-packages
+- also include the LGPL library license file in addition to the GPL license file
+- fix BuildRequires for perl so it's compatible with both Fedora, RHEL5 and RHEL6
+
+* Mon Dec 21 2009 John Dennis <jdennis@redhat.com> - 2.1.7-5
+- fix various rpmlint issues.
+
+* Fri Dec 4 2009 Stepan Kasal <skasal@redhat.com> - 2.1.7-4
+- rebuild against perl 5.10.1
+
+* Thu Dec 3 2009 John Dennis <jdennis@redhat.com> - 2.1.7-3
+- resolves: bug #522111 non-conformant initscript
+ also change permission of /var/run/radiusd from 0700 to 0755
+ so that "service radiusd status" can be run as non-root
+
+* Wed Sep 16 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.7-2
+- use password-auth common PAM configuration instead of system-auth
+
+* Tue Sep 15 2009 John Dennis <jdennis@redhat.com> - 2.1.7-1
+- enable building of the rlm_wimax module
+- pcap wire analysis support is enabled and available in utils subpackage
+- Resolves bug #523053 radtest manpage in wrong package
+- update to latest upstream release, from upstream Changelog:
+ Feature improvements
+ * Full support for CoA and Disconnect packets as per RFC 3576
+ and RFC 5176. Both receiving and proxying CoA is supported.
+ * Added "src_ipaddr" configuration to "home_server". See
+ proxy.conf for details.
+ * radsniff now accepts -I, to read from a filename instead of
+ a device.
+ * radsniff also prints matching requests and any responses to those
+ requests when '-r' is used.
+ * Added example of attr_filter for Access-Challenge packets
+ * Added support for udpfromto in DHCP code
+ * radmin can now selectively mark modules alive/dead.
+ See "set module state".
+ * Added customizable messages on login success/fail.
+ See msg_goodpass && msg_badpass in log{} section of radiusd.conf
+ * Document "chase_referrals" and "rebind" in raddb/modules/ldap
+ * Preliminary implementation of DHCP relay.
+ * Made thread pool section optional. If it doesn't exist,
+ the server will run single-threaded.
+ * Added sample radrelay.conf for people upgrading from 1.x
+ * Made proxying more stable by failing over, rather than
+ rejecting the first request. See "response_window" in proxy.conf
+ * Allow home_server_pools to exist without realms.
+ * Add dictionary.iea (closes bug #7)
+ * Added support for RFC 5580
+ * Added experimental sql_freetds module from Gabriel Blanchard.
+ * Updated dictionary.foundry
+ * Added sample configuration for MySQL cluster in raddb/sql/ndb
+ See the README file for explanations.
+ Bug fixes
+ * Fixed corner case where proxied packets could have extra
+ character in User-Password attribute. Fix from Niko Tyni.
+ * Extended size of "attribute" field in SQL to 64.
+ * Fixes to ruby module to be more careful about when it builds.
+ * Updated Perl module "configure" script to check for broken
+ Perl installations.
+ * Fix "status_check = none". It would still send packets
+ in some cases.
+ * Set recursive flag on the proxy mutex, which enables safer
+ cleanup on some platforms.
+ * Copy the EAP username verbatim, rather than escaping it.
+ * Update handling so that robust-proxy-accounting works when
+ all home servers are down for extended periods of time.
+ * Look for DHCP option 53 anywhere in the packet, not just
+ at the start.
+ * Fix processing of proxy fail handler with virtual servers.
+ * DHCP code now prints out correct src/dst IP addresses
+ when sending packets.
+ * Removed requirement for DHCP to have clients
+ * Fixed handling of DHCP packets with message-type buried in the packet
+ * Fixed corner case with negation in unlang.
+ * Minor fixes to default MySQL & PostgreSQL schemas
+ * Suppress MSCHAP complaints in debugging mode.
+ * Fix SQL module for multiple instance, and possible crash on HUP
+ * Fix permissions for radius.log for sites that change user/group,
+ but which don't create the file before starting radiusd.
+ * Fix double counting of packets when proxying
+ * Make %%l work
+ * Fix pthread keys in rlm_perl
+ * Log reasons for EAP failure (closes bug #8)
+ * Load home servers and pools that aren't referenced from a realm.
+ * Handle return codes from virtual attributes in "unlang"
+ (e.g. LDAP-Group). This makes "!(expr)" work for them.
+ * Enable VMPS to see contents of virtual server again
+ * Fix WiMAX module to be consistent with examples. (closes bug #10)
+ * Fixed crash with policies dependent on NAS-Port comparisons
+ * Allowed vendor IDs to be be higher than 32767.
+ * Fix crash on startup with certain regexes in "hints" file.
+ * Fix crash in attr_filter module when packets don't exist
+ * Allow detail file reader to be faster when "load_factor = 100"
+ * Add work-around for build failures with errors related to
+ lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible.
+ * Made ldap module "rebind" option aware of older, incompatible
+ versions of OpenLDAP.
+ * Check value of Fall-Through in attr_filter module.
+
+* Fri Aug 21 2009 Tomas Mraz <tmraz@redhat.com> - 2.1.6-6
+- rebuilt with new openssl
+
+* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.1.6-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Fri Jul 10 2009 John Dennis <jdennis@redhat.com> - 2.1.6-4
+- install COPYRIGHT CREDITS INSTALL LICENSE README into docdir
+
+* Tue Jun 23 2009 John Dennis <jdennis@redhat.com> - 2.1.6-3
+- resolves bug #507571 freeradius packages do not check for user/group existence
+
+* Tue Jun 2 2009 John Dennis <jdennis@redhat.com> - 2.1.6-2
+- make /etc/raddb/sites-available/* be config(noreplace)
+
+* Mon May 18 2009 John Dennis <jdennis@redhat.com> - 2.1.6-1
+- update to latest upstream release, from upstream Changelog:
+ Feature improvements
+ * radclient exits with 0 on successful (accept / ack), and 1
+ otherwise (no response / reject)
+ * Added support for %%{sql:UPDATE ..}, and insert/delete
+ Patch from Arran Cudbard-Bell
+ * Added sample "do not respond" policy. See raddb/policy.conf
+ and raddb/sites-available/do_not_respond
+ * Cleanups to Suse spec file from Norbert Wegener
+ * New VSAs for Juniper from Bjorn Mork
+ * Include more RFC dictionaries in the default install
+ * More documentation for the WiMAX module
+ * Added "chase_referrals" and "rebind" configuration to rlm_ldap.
+ This helps with Active Directory. See raddb/modules/ldap
+ * Don't load pre/post-proxy if proxying is disabled.
+ * Added %%{md5:...}, which returns MD5 hash in hex.
+ * Added configurable "retry_interval" and "poll_interval"
+ for "detail" listeners.
+ * Added "delete_mppe_keys" configuration option to rlm_wimax.
+ Apparently some WiMAX clients misbehave when they see those keys.
+ * Added experimental rlm_ruby from
+ http://github.com/Antti/freeradius-server/tree/master
+ * Add Tunnel attributes to ldap.attrmap
+ * Enable virtual servers to be reloaded on HUP. For now, only
+ the "authorize", "authenticate", etc. processing sections are
+ reloaded. Clients and "listen" sections are NOT reloaded.
+ * Updated "radwatch" script to be more robust. See scripts/radwatch
+ * Added certificate compatibility notes in raddb/certs/README,
+ for compatibility with different operating systems. (i.e. Windows)
+ * Permit multiple "-e" in radmin.
+ * Add support for originating CoA-Request and Disconnect-Request.
+ See raddb/sites-available/originate-coa.
+ * Added "lifetime" and "max_queries" to raddb/sql.conf.
+ This helps address the problem of hung SQL sockets.
+ * Allow packets to be injected via radmin. See "inject help"
+ in radmin.
+ * Answer VMPS reconfirmation request. Patch from Hermann Lauer.
+ * Sample logrotate script in scripts/logrotate.freeradius
+ * Add configurable poll interval for "detail" listeners
+ * New "raddebug" command. This prints debugging information from
+ a running server. See "man raddebug.
+ * Add "require_message_authenticator" configuration to home_server
+ configuration. This makes the server add Message-Authenticator
+ to all outgoing Access-Request packets.
+ * Added smsotp module, as contributed by Siemens.
+ * Enabled the administration socket in the default install.
+ See raddb/sites-available/control-socket, and "man radmin"
+ * Handle duplicate clients, such as with replicated or
+ load-balanced SQL servers and "readclients = yes"
+ Bug fixes
+ * Minor changes to allow building without VQP.
+ * Minor fixes from John Center
+ * Fixed raddebug example
+ * Don't crash when deleting attributes via unlang
+ * Be friendlier to very fast clients
+ * Updated the "detail" listener so that it only polls once,
+ and not many times in a row, leaking memory each time...
+ * Update comparison for Packet-Src-IP-Address (etc.) so that
+ the operators other than '==' work.
+ * Did autoconf magic to work around weird libtool bug
+ * Make rlm_perl keep tags for tagged attributes in more situations
+ * Update UID checking for radmin
+ * Added "include_length" field for TTLS. It's needed for RFC
+ compliance, but not (apparently) for interoperability.
+ * Clean up control sockets when they are closed, so that we don't
+ leak memory.
+ * Define SUN_LEN for systems that don't have it.
+ * Correct some boundary conditions in the conditional checker ("if")
+ in "unlang". Bug noted by Arran Cudbard-Bell.
+ * Work around minor building issues in gmake. This should only
+ have affected developers.
+ * Change how we manage unprivileged user/group, so that we do not
+ create control sockets owned by root.
+ * Fixed more minor issues found by Coverity.
+ * Allow raddb/certs/bootstrap to run when there is no "make"
+ command installed.
+ * In radiusd.conf, run_dir depends on the name of the program,
+ and isn't hard-coded to "..../radiusd"
+ * Check for EOF in more places in the "detail" file reader.
+ * Added Freeswitch dictionary.
+ * Chop ethernet frames in VMPS, rather than droppping packets.
+ * Fix EAP-TLS bug. Patch from Arnaud Ebalard
+ * Don't lose string for regex-compares in the "users" file.
+ * Expose more functions in rlm_sql to rlm_sqlippool, which
+ helps on systems where RTLD_GLOBAL is off.
+ * Fix typos in MySQL schemas for ippools.
+ * Remove macro that was causing build issues on some platforms.
+ * Fixed issues with dead home servers. Bug noted by Chris Moules.
+ * Fixed "access after free" with some dynamic clients.
+
+- fix packaging bug, some directories missing execute permission
+ /etc/raddb/dictionary now readable by all.
+
+* Tue Feb 24 2009 John Dennis <jdennis@redhat.com> - 2.1.3-4
+- fix type usage in unixodbc to match new type usage in unixodbc API
+
+* Thu Feb 19 2009 John Dennis <jdennis@redhat.com> - 2.1.3-3
+- add pointer to Red Hat documentation in docdir
+
+* Sat Jan 24 2009 Caolán McNamara <caolanm@redhat.com> - 2.1.3-2
+- rebuild for dependencies
+
+* Thu Dec 4 2008 John Dennis <jdennis@redhat.com> - 2.1.3-1
+- upgrade to latest upstream release, upstream summary follows:
+ The focus of this release is stability.
+ Feature Improvements:
+ * Allow running with "user=radiusd" and binding to secure sockets.
+ * Start sending Status-Server "are you alive" messages earlier, which
+ helps with proxying multiple realms to a home server.
+ * Removed thread pool code from rlm_perl. It's not necessary.
+ * Added example Perl configuration to raddb/modules/perl
+ * Force OpenSSL to support certificates with SHA256. This seems to be
+ necessary for WiMAX certs.
+ Bug fixes:
+ * Fix Debian patch to allow it to build.
+ * Fix potential NULL dereference in debugging mode on certain
+ platforms for TTLS and PEAP inner tunnels.
+ * Fix uninitialized memory in handling of vendor definitions
+ * Fix parsing of quoted (but non-string) attributes in the "users" file.
+ * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0
+ * use SUN_LEN in control socket, to avoid truncation on some platforms.
+ * Correct internal handling of "debug condition" to prevent it from
+ being over-written.
+ * Check return code of regcomp in "unlang", so that invalid regular
+ expressions are caught rather than mishandled.
+ * Make rlm_sql use <ltdl.h>. Addresses bug #610.
+ * Document list "type = status" better. Closes bug #580.
+ * Set "default days" for certificates, because OpenSSL won't do it.
+ This closes bug #615.
+ * Reference correct list in example raddb/modules/ldap. Closes #596.
+ * Increase default schema size for Acct-Session-Id to 64. Closes #540.
+ * Fix use of temporary files in dialup-admin. Closes #605 and
+ addresses CVE-2008-4474.
+ * Addressed a number of minor issues found by Coverity.
+ * Added DHCP option 150 to the dictionary. Closes #618.
+
+* Wed Dec 3 2008 John Dennis <jdennis@redhat.com> - 2.1.1-8
+- add --with-system-libtool to configure as a workaround for
+undefined reference to lt__PROGRAM__LTX_preloaded_symbols
+
+* Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
+- add obsoletes tag for dialupadmin subpackages which were removed
+
+* Mon Dec 1 2008 John Dennis <jdennis@redhat.com> - 2.1.1-7
+- add readline-devel BuildRequires
+
+* Sun Nov 30 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.1.1-4
+- Rebuild for Python 2.6
+
+* Fri Nov 21 2008 John Dennis <jdennis@redhat.com> - 2.1.1-3
+- make spec file buildable on RHEL5.2 by making perl-devel a fedora only dependency.
+- remove diaupadmin packages, it's not well supported and there are problems with it.
+
+* Fri Sep 26 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
+- Resolves: bug #464119 bootstrap code could not create initial certs in /etc/raddb/certs because
+ permissions were 750, radiusd running as euid radiusd could not write there, permissions now 770
+
+* Thu Sep 25 2008 John Dennis <jdennis@redhat.com> - 2.1.1-1
+- upgrade to new upstream 2.1.1 release
+
+* Wed Jul 30 2008 John Dennis <jdennis@redhat.com> - 2.0.5-2
+- Resolves: bug #453761: FreeRADIUS %%post should not include chown -R
+ specify file attributes for /etc/raddb/ldap.attrmap
+ fix consistent use of tabs/spaces (rpmlint warning)
+
+* Mon Jun 9 2008 John Dennis <jdennis@redhat.com> - 2.0.5-1
+- upgrade to latest upstream, see Changelog for details,
+ upstream now has more complete fix for bug #447545, local patch removed
+
+* Wed May 28 2008 John Dennis <jdennis@redhat.com> - 2.0.4-1
+- upgrade to latest upstream, see Changelog for details
+- resolves: bug #447545: freeradius missing /etc/raddb/sites-available/inner-tunnel
+
+* Fri May 16 2008 <jdennis@redhat.com> - 2.0.3-3
+- # Temporary fix for bug #446864, turn off optimization
+
+* Fri Apr 18 2008 John Dennis <jdennis@redhat.com> - 2.0.3-2
+- remove support for radrelay, it's different now
+- turn off default inclusion of SQL config files in radiusd.conf since SQL
+ is an optional RPM install
+- remove mssql config files
+
+* Thu Apr 17 2008 John Dennis <jdennis@redhat.com> - 2.0.3-1
+- Upgrade to current upstream 2.0.3 release
+- Many thanks to Enrico Scholz for his spec file suggestions incorporated here
+- Resolve: bug #438665: Contains files owned by buildsystem
+- Add dialupadmin-mysql, dialupadmin-postgresql, dialupadmin-ldap subpackages
+ to further partition external dependencies.
+- Clean up some unnecessary requires dependencies
+- Add versioned requires between subpackages
+
+* Tue Mar 18 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 2.0.2-2
+- add Requires for versioned perl (libperl.so)
+
+* Thu Feb 28 2008 <jdennis@redhat.com> - 2.0.2-1
+- upgrade to new 2.0 release
+- split into subpackages for more fine grained installation
+
+* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 1.1.7-4.4.ipa
+- Autorebuild for GCC 4.3
+
+* Thu Dec 06 2007 Release Engineering <rel-eng at fedoraproject dot org> - 1.1.7-3.4.ipa
+- Rebuild for deps
+
+* Sat Nov 10 2007 <jdennis@redhat.com> - 1.1.7-3.3.ipa
+- add support in rlm_ldap for reading clients from ldap
+- fix TLS parameter controling if a cert which fails to validate
+ will be accepted (i.e. self-signed),
+ rlm_ldap config parameter=tls_require_cert
+ ldap LDAP_OPT_X_TLS_REQUIRE_CERT parameter was being passed to
+ ldap_set_option() when it should have been ldap_int_tls_config()
+
+* Sat Nov 3 2007 <jdennis@redhat.com> - 1.1.7-3.2.ipa
+- add support in rlm_ldap for SASL/GSSAPI binds to the LDAP server
+
+* Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3.1
+- made init script fully lsb conform
+
+* Mon Sep 17 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-3
+- fixed initscript problem (rhbz#292521)
+
+* Tue Aug 28 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-2
+- fixed initscript for LSB (rhbz#243671, rhbz#243928)
+- fixed license tag
+
+* Tue Aug 7 2007 Thomas Woerner <twoerner@redhat.com> 1.1.7-1
+- new versin 1.1.7
+- install snmp MIB files
+- dropped LDAP_DEPRECATED flag, it is upstream
+- marked config files for sub packages as config (rhbz#240400)
+- moved db files to /var/lib/raddb (rhbz#199082)
+
+* Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-2
+- radiusd expects /etc/raddb to not be world readable or writable
+ /etc/raddb now belongs to radiusd, post script sets permissions
+
+* Fri Jun 15 2007 Thomas Woerner <twoerner@redhat.com> 1.1.6-1
+- new version 1.1.6
+
+* Fri Mar 9 2007 Thomas Woerner <twoerner@redhat.com> 1.1.5-1
+- new version 1.1.5
+ - no /etc/raddb/otppasswd.sample anymore
+ - build is pie by default, dropped pie patch
+- fixed build requirement for perl (perl-devel)
+
+* Fri Feb 23 2007 Karsten Hopp <karsten@redhat.com> 1.1.3-3
+- remove trailing dot from summary
+- fix buildroot
+- fix post/postun/preun requirements
+- use rpm macros
+
+* Fri Dec 8 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2.1
+- rebuild for new postgresql library version
+
+* Thu Nov 30 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-2
+- fixed ldap code to not use internals, added LDAP_DEPRECATED compile time flag
+ (#210912)
+
+* Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.3-1
+- new version 1.1.3 with lots of upstream bug fixes, some security fixes
+ (#205654)
+
+* Tue Aug 15 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-2
+- commented out include for sql.conf in radiusd.conf (#202561)
+
+* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.1.2-1.1
+- rebuild
+
+* Thu Jun 1 2006 Thomas Woerner <twoerner@redhat.com> 1.1.2-1
+- new version 1.1.2
+
+* Wed May 31 2006 Thomas Woerner <twoerner@redhat.com> 1.1.1-1
+- new version 1.1.1
+- fixed incorrect rlm_sql globbing (#189095)
+ Thanks to Yanko Kaneti for the fix.
+- fixed chown syntax in post script (#182777)
+- dropped gcc34, libdir and realloc-return patch
+- spec file cleanup with additional libtool build fixes
+
+* Fri Feb 10 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.2
+- bump again for double-long bug on ppc(64)
+
+* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.0.5-1.1
+- rebuilt for new gcc4.1 snapshot and glibc changes
+
+* Tue Dec 13 2005 Thomas Woerner <twoerner@redhat.com> 1.0.5-1
+- new version 1.0.5
+
+* Fri Dec 09 2005 Jesse Keating <jkeating@redhat.com>
+- rebuilt
+
+* Sat Nov 12 2005 Tom Lane <tgl@redhat.com> - 1.0.4-5
+- Rebuild due to mysql update.
+
+* Wed Nov 9 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-4
+- rebuilt with new openssl
+- fixed ignored return value of realloc
+
+* Fri Sep 30 2005 Tomas Mraz <tmraz@redhat.com> - 1.0.4-3
+- use include instead of pam_stack in pam config
+
+* Wed Jul 20 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-2
+- added missing build requires for libtool-ltdl-devel (#160877)
+- modified file list to get a report for missing plugins
+
+* Tue Jun 28 2005 Thomas Woerner <twoerner@redhat.com> 1.0.4-1
+- new version 1.0.4
+- droppend radrelay patch (fixed upstream)
+
+* Thu Apr 14 2005 Warren Togami <wtogami@redhat.com> 1.0.2-2
+- rebuild against new postgresql-libs
+
+* Mon Apr 4 2005 Thomas Woerner <twoerner@redhat.com> 1.0.2-1
+- new version 1.0.2
+
+* Fri Nov 19 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-3
+- rebuild for MySQL 4
+- switched over to installed libtool
+
+* Fri Nov 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-2
+- Fixed install problem of radeapclient (#138069)
+
+* Wed Oct 6 2004 Thomas Woerner <twoerner@redhat.com> 1.0.1-1
+- new version 1.0.1
+- applied radrelay CVS patch from Kevin Bonner
+
+* Wed Aug 25 2004 Warren Togami <wtogami@redhat.com> 1.0.0-3
+- BuildRequires pam-devel and libtool
+- Fix errant text in description
+- Other minor cleanups
+
+* Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2.1
+- renamed /etc/pam.d/radius to /etc/pam.d/radiusd to match default
+ configuration (#130613)
+
+* Wed Aug 25 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-2
+- fixed BuildRequires for openssl-devel (#130606)
+
+* Mon Aug 16 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-1
+- 1.0.0 final
+
+* Mon Jul 5 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.2
+- added buildrequires for zlib-devel (#127162)
+- fixed libdir patch to prefer own libeap instead of installed one (#127168)
+- fixed samba account maps in LDAP for samba v3 (#127173)
+
+* Thu Jul 1 2004 Thomas Woerner <twoerner@redhat.com> 1.0.0-0.pre3.1
+- third "pre" release of version 1.0.0
+- rlm_ldap is using SASLv2 (#126507)
+
+* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Thu Jun 3 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-4.1
+- fixed BuildRequires for gdbm-devel
+
+* Tue Mar 30 2004 Harald Hoyer <harald@redhat.com> - 0.9.3-4
+- gcc34 compilation fixes
+
+* Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Tue Feb 24 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-3.2
+- added sql scripts for rlm_sql to documentation (#116435)
+
+* Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com>
+- rebuilt
+
+* Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2.1
+- using -fPIC instead of -fpic for s390 ans s390x
+
+* Thu Feb 5 2004 Thomas Woerner <twoerner@redhat.com> 0.9.3-2
+- radiusd is pie, now
-* Fri May 23 2003 Marko Myllynen
-- update for 0.9
+* Tue Nov 25 2003 Thomas Woerner <twoerner@redhat.com> 0.9.3-1
+- new version 0.9.3 (bugfix release)
-* Wed Sep 4 2002 Marko Myllynen
-- fix libtool issues for good
+* Fri Nov 7 2003 Thomas Woerner <twoerner@redhat.com> 0.9.2-1
+- new version 0.9.2
-* Thu Aug 22 2002 Marko Myllynen
-- update for 0.7/0.8
+* Mon Sep 29 2003 Thomas Woerner <twoerner@redhat.com> 0.9.1-1
+- new version 0.9.1
-* Tue Jun 18 2002 Marko Myllynen
-- run as radiusd user instead of root
-- added some options for configure
+* Mon Sep 22 2003 Nalin Dahyabhai <nalin@redhat.com> 0.9.0-2.2
+- modify default PAM configuration to remove the directory part of the module
+ name, so that 32- and 64-bit libpam (called from 32- or 64-bit radiusd) on
+ multilib systems will always load the right module for the architecture
+- modify default PAM configuration to use pam_stack
-* Thu Jun 6 2002 Marko Myllynen
-- set noreplace for non-dictionary files in /etc/raddb
+* Mon Sep 1 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-2.1
+- com_err.h moved to /usr/include/et
-* Sun May 26 2002 Frank Cusack <frank@google.com>
-- move /var dirs from %%post to %%files
+* Tue Jul 22 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-1
+- 0.9.0 final
-* Thu Feb 14 2002 Marko Myllynen
-- use dir name macros in all configure options
-- libtool is required only when building the package
-- misc clean ups
+* Wed Jul 16 2003 Thomas Woerner <twoerner@redhat.com> 0.9.0-0.9.0
+- new version 0.9.0 pre3
-* Wed Feb 13 2002 Marko Myllynen
-- use %%{_mandir} instead of /usr/man
-- rename %%postin as %%post
-- clean up name/version
+* Thu May 22 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-6
+- included directory /var/log/radius/radacct for logrotate
-* Fri Jan 18 2002 Frank Cusack <frank@google.com>
-- remove (noreplace) for /etc/raddb/* (due to rpm bugs)
+* Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-5
+- moved log and run dir to files section, cleaned up post
-* Fri Sep 07 2001 Ivan F. Martinez <ivanfm@ecodigit.com.br>
-- changes to make compatible with default config file shipped
-- adjusts log files are on /var/log/radius instead of /var/log
-- /etc/raddb changed to config(noreplace) to don't override
-- user configs
+* Wed May 21 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-4
+- added missing run dir in post
-* Fri Sep 22 2000 Bruno Lopes F. Cabral <bruno@openline.com.br>
-- spec file clear accordling to the libltdl fix and minor updates
+* Tue May 20 2003 Thomas Woerner <twoerner@redhat.com> 0.8.1-3
+- fixed module load patch
-* Wed Sep 12 2000 Bruno Lopes F. Cabral <bruno@openline.com.br>
-- Updated to snapshot-12-Sep-00
+* Fri May 16 2003 Thomas Woerner <twoerner@redhat.com>
+- removed la files, removed devel package
+- split into 4 packages: freeradius, freeradius-mysql, freeradius-postgresql,
+ freeradius-unixODBC
+- fixed requires and buildrequires
+- create logging dir in post if it does not exist
+- fixed module load without la files
-* Fri Jun 16 2000 Bruno Lopes F. Cabral <bruno@openline.com.br>
-- Initial release
+* Thu Apr 17 2003 Thomas Woerner <twoerner@redhat.com>
+- Initial build.