Extend hw_mode to support any band for offloaded ACS case

[mech_eap.git] / src / common / qca-vendor.h

diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index 8f961bf..3c35e79 100644 (file)
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -70,8 +70,25 @@ enum qca_radiotap_vendor_ids {
  *     supported by the driver. enum qca_wlan_vendor_features defines
  *     the possible features.
  *
- * @QCA_NL80211_VENDOR_SUBCMD_CAC_STARTED: Event used by driver, which
- *     supports DFS offloading, to indicate a channel availability check start.
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
+ *     which supports DFS offloading, to indicate a channel availability check
+ *     start.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
+ *     which supports DFS offloading, to indicate a channel availability check
+ *     completion.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
+ *     which supports DFS offloading, to indicate that the channel availability
+ *     check aborted, no change to the channel status.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
+ *     driver, which supports DFS offloading, to indicate that the
+ *     Non-Occupancy Period for this channel is over, channel becomes usable.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
+ *     which supports DFS offloading, to indicate a radar pattern has been
+ *     detected. The channel is now unusable.
  */
 enum qca_nl80211_vendor_subcmds {
        QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -115,10 +132,26 @@ enum qca_nl80211_vendor_subcmds {
        QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
        QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
        QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
-       /* 53 - reserved for QCA */
+       /* 53 - reserved - was used by QCA, but not in use anymore */
        QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
        QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
-       QCA_NL80211_VENDOR_SUBCMD_CAC_STARTED = 56,
+       QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
+       QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
+       QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
+       QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
+       QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
+       /* 61-90 - reserved for QCA */
+       QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
+       QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
+       QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
+       QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
+       QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
+       QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
+       QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
+       QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
+       QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
+       QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
+       QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
 };
 
 
@@ -172,6 +205,11 @@ enum qca_wlan_vendor_attr_acs_offload {
        QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
        QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
        QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
+       QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
+       QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
+       QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
+       QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
+       QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
        /* keep last */
        QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
        QCA_WLAN_VENDOR_ATTR_ACS_MAX =
@@ -183,6 +221,7 @@ enum qca_wlan_vendor_acs_hw_mode {
        QCA_ACS_MODE_IEEE80211G,
        QCA_ACS_MODE_IEEE80211A,
        QCA_ACS_MODE_IEEE80211AD,
+       QCA_ACS_MODE_IEEE80211ANY,
 };
 
 /**
@@ -192,11 +231,35 @@ enum qca_wlan_vendor_acs_hw_mode {
  *     management offload, a mechanism where the station's firmware
  *     does the exchange with the AP to establish the temporal keys
  *     after roaming, rather than having the user space wpa_supplicant do it.
+ * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
+ *     band selection based on channel selection results.
  * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
  */
 enum qca_wlan_vendor_features {
        QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD        = 0,
+       QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY     = 1,
        NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
 };
 
+/**
+ * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
+ *     the offloaded data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
+ *     data.
+ * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
+ *     indication.
+ */
+enum qca_wlan_vendor_attr_data_offload_ind {
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
+
+       /* keep last */
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
+       QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
+};
 #endif /* QCA_VENDOR_H */