/*
* Driver interface definition
- * Copyright (c) 2003-2010, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Alternatively, this software may be distributed under the terms of BSD
- * license.
- *
- * See README and COPYING for more details.
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
*
* This file defines a driver interface used by both %wpa_supplicant and
* hostapd. The first part of the file defines data structures used in various
#define WPA_SUPPLICANT_DRIVER_VERSION 4
#include "common/defs.h"
+#include "utils/list.h"
#define HOSTAPD_CHAN_DISABLED 0x00000001
#define HOSTAPD_CHAN_PASSIVE_SCAN 0x00000002
#define HOSTAPD_CHAN_HT40PLUS 0x00000010
#define HOSTAPD_CHAN_HT40MINUS 0x00000020
#define HOSTAPD_CHAN_HT40 0x00000040
+#define HOSTAPD_CHAN_SURVEY_LIST_INITIALIZED 0x00000080
+
+#define HOSTAPD_CHAN_DFS_UNKNOWN 0x00000000
+#define HOSTAPD_CHAN_DFS_USABLE 0x00000100
+#define HOSTAPD_CHAN_DFS_UNAVAILABLE 0x00000200
+#define HOSTAPD_CHAN_DFS_AVAILABLE 0x00000300
+#define HOSTAPD_CHAN_DFS_MASK 0x00000300
+
+#define HOSTAPD_CHAN_VHT_10_70 0x00000800
+#define HOSTAPD_CHAN_VHT_30_50 0x00001000
+#define HOSTAPD_CHAN_VHT_50_30 0x00002000
+#define HOSTAPD_CHAN_VHT_70_10 0x00004000
+
+enum reg_change_initiator {
+ REGDOM_SET_BY_CORE,
+ REGDOM_SET_BY_USER,
+ REGDOM_SET_BY_DRIVER,
+ REGDOM_SET_BY_COUNTRY_IE,
+};
/**
* struct hostapd_channel_data - Channel information
/**
* freq - Frequency in MHz
*/
- short freq;
+ int freq;
/**
* flag - Channel flags (HOSTAPD_CHAN_*)
int flag;
/**
- * max_tx_power - maximum transmit power in dBm
+ * max_tx_power - Regulatory transmit power limit in dBm
*/
u8 max_tx_power;
+
+ /*
+ * survey_list - Linked list of surveys
+ */
+ struct dl_list survey_list;
+
+ /**
+ * min_nf - Minimum observed noise floor, in dBm, based on all
+ * surveyed channel data
+ */
+ s8 min_nf;
+
+#ifdef CONFIG_ACS
+ /**
+ * interference_factor - Computed interference factor on this
+ * channel (used internally in src/ap/acs.c; driver wrappers do not
+ * need to set this)
+ */
+ long double interference_factor;
+#endif /* CONFIG_ACS */
};
#define HOSTAPD_MODE_FLAG_HT_INFO_KNOWN BIT(0)
+#define HOSTAPD_MODE_FLAG_VHT_INFO_KNOWN BIT(1)
/**
* struct hostapd_hw_modes - Supported hardware mode information
*/
u8 a_mpdu_params;
+ /**
+ * vht_capab - VHT (IEEE 802.11ac) capabilities
+ */
+ u32 vht_capab;
+
+ /**
+ * vht_mcs_set - VHT MCS (IEEE 802.11ac) rate parameters
+ */
+ u8 vht_mcs_set[8];
+
unsigned int flags; /* HOSTAPD_MODE_FLAG_* */
};
#define IEEE80211_CAP_IBSS 0x0002
#define IEEE80211_CAP_PRIVACY 0x0010
+/* DMG (60 GHz) IEEE 802.11ad */
+/* type - bits 0..1 */
+#define IEEE80211_CAP_DMG_MASK 0x0003
+#define IEEE80211_CAP_DMG_IBSS 0x0001 /* Tx by: STA */
+#define IEEE80211_CAP_DMG_PBSS 0x0002 /* Tx by: PCP */
+#define IEEE80211_CAP_DMG_AP 0x0003 /* Tx by: AP */
+
#define WPA_SCAN_QUAL_INVALID BIT(0)
#define WPA_SCAN_NOISE_INVALID BIT(1)
#define WPA_SCAN_LEVEL_INVALID BIT(2)
* struct wpa_scan_results - Scan results
* @res: Array of pointers to allocated variable length scan result entries
* @num: Number of entries in the scan result array
+ * @fetch_time: Time when the results were fetched from the driver
*/
struct wpa_scan_results {
struct wpa_scan_res **res;
size_t num;
+ struct os_reltime fetch_time;
};
/**
size_t num_filter_ssids;
/**
+ * filter_rssi - Filter by RSSI
+ *
+ * The driver may filter scan results in firmware to reduce host
+ * wakeups and thereby save power. Specify the RSSI threshold in s32
+ * dBm.
+ */
+ s32 filter_rssi;
+
+ /**
* p2p_probe - Used to disable CCK (802.11b) rates for P2P probes
*
* When set, the driver is expected to remove rates 1, 2, 5.5, and 11
* and not to transmit the frames at any of those rates.
*/
u8 p2p_probe;
+
+ /**
+ * only_new_results - Request driver to report only new results
+ *
+ * This is used to request the driver to report only BSSes that have
+ * been detected after this scan request has been started, i.e., to
+ * flush old cached BSS entries.
+ */
+ int only_new_results;
};
/**
*/
int p2p;
+ const u8 *sae_data;
+ size_t sae_data_len;
+
};
enum wps_mode {
int freq;
/**
+ * bg_scan_period - Background scan period in seconds, 0 to disable
+ * background scan, or -1 to indicate no change to default driver
+ * configuration
+ */
+ int bg_scan_period;
+
+ /**
* wpa_ie - WPA information element for (Re)Association Request
* WPA information element to be included in (Re)Association
* Request (including information element id and length). Use
unsigned int wpa_proto;
/**
- * pairwise_suite - Selected pairwise cipher suite
+ * pairwise_suite - Selected pairwise cipher suite (WPA_CIPHER_*)
*
* This is usually ignored if @wpa_ie is used.
*/
- enum wpa_cipher pairwise_suite;
+ unsigned int pairwise_suite;
/**
- * group_suite - Selected group cipher suite
+ * group_suite - Selected group cipher suite (WPA_CIPHER_*)
*
* This is usually ignored if @wpa_ie is used.
*/
- enum wpa_cipher group_suite;
+ unsigned int group_suite;
/**
- * key_mgmt_suite - Selected key management suite
+ * key_mgmt_suite - Selected key management suite (WPA_KEY_MGMT_*)
*
* This is usually ignored if @wpa_ie is used.
*/
- enum wpa_key_mgmt key_mgmt_suite;
+ unsigned int key_mgmt_suite;
/**
* auth_alg - Allowed authentication algorithms
* STA mode: bits 0..3 UAPSD enabled for VO,VI,BK,BE
*/
int uapsd;
+
+ /**
+ * fixed_bssid - Whether to force this BSSID in IBSS mode
+ * 1 = Fix this BSSID and prevent merges.
+ * 0 = Do not fix BSSID.
+ */
+ int fixed_bssid;
+
+ /**
+ * disable_ht - Disable HT (IEEE 802.11n) for this connection
+ */
+ int disable_ht;
+
+ /**
+ * HT Capabilities over-rides. Only bits set in the mask will be used,
+ * and not all values are used by the kernel anyway. Currently, MCS,
+ * MPDU and MSDU fields are used.
+ */
+ const u8 *htcaps; /* struct ieee80211_ht_capabilities * */
+ const u8 *htcaps_mask; /* struct ieee80211_ht_capabilities * */
+
+#ifdef CONFIG_VHT_OVERRIDES
+ /**
+ * disable_vht - Disable VHT for this connection
+ */
+ int disable_vht;
+
+ /**
+ * VHT capability overrides.
+ */
+ const struct ieee80211_vht_capabilities *vhtcaps;
+ const struct ieee80211_vht_capabilities *vhtcaps_mask;
+#endif /* CONFIG_VHT_OVERRIDES */
};
enum hide_ssid {
/**
* head - Beacon head from IEEE 802.11 header to IEs before TIM IE
*/
- const u8 *head;
+ u8 *head;
/**
* head_len - Length of the head buffer in octets
/**
* tail - Beacon tail following TIM IE
*/
- const u8 *tail;
+ u8 *tail;
/**
* tail_len - Length of the tail buffer in octets
int beacon_int;
/**
+ * basic_rates: -1 terminated array of basic rates in 100 kbps
+ *
+ * This parameter can be used to set a specific basic rate set for the
+ * BSS. If %NULL, default basic rate set is used.
+ */
+ int *basic_rates;
+
+ /**
+ * proberesp - Probe Response template
+ *
+ * This is used by drivers that reply to Probe Requests internally in
+ * AP mode and require the full Probe Response template.
+ */
+ u8 *proberesp;
+
+ /**
+ * proberesp_len - Length of the proberesp buffer in octets
+ */
+ size_t proberesp_len;
+
+ /**
* ssid - The SSID to use in Beacon/Probe Response frames
*/
const u8 *ssid;
* isolate - Whether to isolate frames between associated stations
*
* If this is non-zero, the AP is requested to disable forwarding of
- * frames between association stations.
+ * frames between associated stations.
*/
int isolate;
* enabled.
*/
u8 access_network_type;
+
+ /**
+ * ap_max_inactivity - Timeout in seconds to detect STA's inactivity
+ *
+ * This is used by driver which advertises this capability.
+ */
+ int ap_max_inactivity;
+
+ /**
+ * disable_dgaf - Whether group-addressed frames are disabled
+ */
+ int disable_dgaf;
};
/**
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE 0x00000010
#define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020
#define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040
+#define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080
unsigned int key_mgmt;
#define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001
#define WPA_DRIVER_CAPA_ENC_WEP104 0x00000002
#define WPA_DRIVER_CAPA_ENC_TKIP 0x00000004
#define WPA_DRIVER_CAPA_ENC_CCMP 0x00000008
+#define WPA_DRIVER_CAPA_ENC_WEP128 0x00000010
+#define WPA_DRIVER_CAPA_ENC_GCMP 0x00000020
+#define WPA_DRIVER_CAPA_ENC_GCMP_256 0x00000040
+#define WPA_DRIVER_CAPA_ENC_CCMP_256 0x00000080
+#define WPA_DRIVER_CAPA_ENC_BIP 0x00000100
+#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_128 0x00000200
+#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400
+#define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800
unsigned int enc;
#define WPA_DRIVER_AUTH_OPEN 0x00000001
#define WPA_DRIVER_FLAGS_AP 0x00000040
/* Driver needs static WEP key setup after association has been completed */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080
-/* Driver takes care of P2P management operations */
-#define WPA_DRIVER_FLAGS_P2P_MGMT 0x00000100
+/* unused: 0x00000100 */
/* Driver supports concurrent P2P operations */
#define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200
/*
* it cannot be used for P2P group operations or non-P2P purposes.
*/
#define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400
-/* This interface is P2P capable (P2P Device, GO, or P2P Client */
+/* This interface is P2P capable (P2P GO or P2P Client) */
#define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800
-/* Driver supports concurrent operations on multiple channels */
-#define WPA_DRIVER_FLAGS_MULTI_CHANNEL_CONCURRENT 0x00001000
+/* unused: 0x00001000 */
/*
* Driver uses the initial interface for P2P management interface and non-P2P
* purposes (e.g., connect to infra AP), but this interface cannot be used for
#define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000
/* Driver requires external TDLS setup/teardown/discovery */
#define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000
+/* Driver indicates support for Probe Response offloading in AP mode */
+#define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000
+/* Driver supports U-APSD in AP mode */
+#define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000
+/* Driver supports inactivity timer in AP mode */
+#define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000
+/* Driver expects user space implementation of MLME in AP mode */
+#define WPA_DRIVER_FLAGS_AP_MLME 0x01000000
+/* Driver supports SAE with user space SME */
+#define WPA_DRIVER_FLAGS_SAE 0x02000000
+/* Driver makes use of OBSS scan mechanism in wpa_supplicant */
+#define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000
+/* Driver supports IBSS (Ad-hoc) mode */
+#define WPA_DRIVER_FLAGS_IBSS 0x08000000
+/* Driver supports radar detection */
+#define WPA_DRIVER_FLAGS_RADAR 0x10000000
+/* Driver supports a dedicated interface for P2P Device */
+#define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000
+/* Driver supports QoS Mapping */
+#define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000
unsigned int flags;
int max_scan_ssids;
* supports in AP mode
*/
unsigned int max_stations;
+
+ /**
+ * probe_resp_offloads - Bitmap of supported protocols by the driver
+ * for Probe Response offloading.
+ */
+/* Driver Probe Response offloading support for WPS ver. 1 */
+#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001
+/* Driver Probe Response offloading support for WPS ver. 2 */
+#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002
+/* Driver Probe Response offloading support for P2P */
+#define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004
+/* Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
+#define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008
+ unsigned int probe_resp_offloads;
+
+ unsigned int max_acl_mac_addrs;
+
+ /**
+ * Number of supported concurrent channels
+ */
+ unsigned int num_multichan_concurrent;
+
+ /**
+ * extended_capa - extended capabilities in driver/device
+ *
+ * Must be allocated and freed by driver and the pointers must be
+ * valid for the lifetime of the driver, i.e., freed in deinit()
+ */
+ const u8 *extended_capa, *extended_capa_mask;
+ unsigned int extended_capa_len;
};
size_t supp_rates_len;
u16 listen_interval;
const struct ieee80211_ht_capabilities *ht_capabilities;
+ const struct ieee80211_vht_capabilities *vht_capabilities;
u32 flags; /* bitmask of WPA_STA_* flags */
int set; /* Set STA parameters instead of add */
+ u8 qosinfo;
+ const u8 *ext_capab;
+ size_t ext_capab_len;
};
struct hostapd_freq_params {
int mode;
int freq;
int channel;
+ /* for HT */
int ht_enabled;
int sec_channel_offset; /* 0 = HT40 disabled, -1 = HT40 enabled,
* secondary channel below primary, 1 = HT40
* enabled, secondary channel above primary */
+
+ /* for VHT */
+ int vht_enabled;
+
+ /* valid for both HT and VHT, center_freq2 is non-zero
+ * only for bandwidth 80 and an 80+80 channel */
+ int center_freq1, center_freq2;
+ int bandwidth;
+};
+
+struct mac_address {
+ u8 addr[ETH_ALEN];
+};
+
+struct hostapd_acl_params {
+ u8 acl_policy;
+ unsigned int num_mac_acl;
+ struct mac_address mac_acl[0];
};
enum wpa_driver_if_type {
* WPA_IF_P2P_GROUP - P2P Group interface (will become either
* WPA_IF_P2P_GO or WPA_IF_P2P_CLIENT, but the role is not yet known)
*/
- WPA_IF_P2P_GROUP
+ WPA_IF_P2P_GROUP,
+
+ /**
+ * WPA_IF_P2P_DEVICE - P2P Device interface is used to indentify the
+ * abstracted P2P Device function in the driver
+ */
+ WPA_IF_P2P_DEVICE
};
struct wpa_init_params {
#define WPA_STA_MFP BIT(3)
#define WPA_STA_TDLS_PEER BIT(4)
-/**
- * struct p2p_params - P2P parameters for driver-based P2P management
- */
-struct p2p_params {
- const char *dev_name;
- u8 pri_dev_type[8];
-#define DRV_MAX_SEC_DEV_TYPES 5
- u8 sec_dev_type[DRV_MAX_SEC_DEV_TYPES][8];
- size_t num_sec_dev_types;
-};
-
enum tdls_oper {
TDLS_DISCOVERY_REQ,
TDLS_SETUP,
TDLS_DISABLE
};
+enum wnm_oper {
+ WNM_SLEEP_ENTER_CONFIRM,
+ WNM_SLEEP_ENTER_FAIL,
+ WNM_SLEEP_EXIT_CONFIRM,
+ WNM_SLEEP_EXIT_FAIL,
+ WNM_SLEEP_TFS_REQ_IE_ADD, /* STA requests driver to add TFS req IE */
+ WNM_SLEEP_TFS_REQ_IE_NONE, /* STA requests empty TFS req IE */
+ WNM_SLEEP_TFS_REQ_IE_SET, /* AP requests driver to set TFS req IE for
+ * a STA */
+ WNM_SLEEP_TFS_RESP_IE_ADD, /* AP requests driver to add TFS resp IE
+ * for a STA */
+ WNM_SLEEP_TFS_RESP_IE_NONE, /* AP requests empty TFS resp IE */
+ WNM_SLEEP_TFS_RESP_IE_SET, /* AP requests driver to set TFS resp IE
+ * for a STA */
+ WNM_SLEEP_TFS_IE_DEL /* AP delete the TFS IE */
+};
+
+/* enum chan_width - Channel width definitions */
+enum chan_width {
+ CHAN_WIDTH_20_NOHT,
+ CHAN_WIDTH_20,
+ CHAN_WIDTH_40,
+ CHAN_WIDTH_80,
+ CHAN_WIDTH_80P80,
+ CHAN_WIDTH_160,
+ CHAN_WIDTH_UNKNOWN
+};
+
/**
* struct wpa_signal_info - Information about channel signal quality
*/
u32 frequency;
int above_threshold;
int current_signal;
+ int avg_signal;
int current_noise;
int current_txrate;
+ enum chan_width chanwidth;
+ int center_frq1;
+ int center_frq2;
+};
+
+/**
+ * struct beacon_data - Beacon data
+ * @head: Head portion of Beacon frame (before TIM IE)
+ * @tail: Tail portion of Beacon frame (after TIM IE)
+ * @beacon_ies: Extra information element(s) to add into Beacon frames or %NULL
+ * @proberesp_ies: Extra information element(s) to add into Probe Response
+ * frames or %NULL
+ * @assocresp_ies: Extra information element(s) to add into (Re)Association
+ * Response frames or %NULL
+ * @probe_resp: Probe Response frame template
+ * @head_len: Length of @head
+ * @tail_len: Length of @tail
+ * @beacon_ies_len: Length of beacon_ies in octets
+ * @proberesp_ies_len: Length of proberesp_ies in octets
+ * @proberesp_ies_len: Length of proberesp_ies in octets
+ * @probe_resp_len: Length of probe response template (@probe_resp)
+ */
+struct beacon_data {
+ u8 *head, *tail;
+ u8 *beacon_ies;
+ u8 *proberesp_ies;
+ u8 *assocresp_ies;
+ u8 *probe_resp;
+
+ size_t head_len, tail_len;
+ size_t beacon_ies_len;
+ size_t proberesp_ies_len;
+ size_t assocresp_ies_len;
+ size_t probe_resp_len;
+};
+
+/**
+ * struct csa_settings - Settings for channel switch command
+ * @cs_count: Count in Beacon frames (TBTT) to perform the switch
+ * @block_tx: 1 - block transmission for CSA period
+ * @freq_params: Next channel frequency parameter
+ * @beacon_csa: Beacon/probe resp/asooc resp info for CSA period
+ * @beacon_after: Next beacon/probe resp/asooc resp info
+ * @counter_offset_beacon: Offset to the count field in beacon's tail
+ * @counter_offset_presp: Offset to the count field in probe resp.
+ */
+struct csa_settings {
+ u8 cs_count;
+ u8 block_tx;
+
+ struct hostapd_freq_params freq_params;
+ struct beacon_data beacon_csa;
+ struct beacon_data beacon_after;
+
+ u16 counter_offset_beacon;
+ u16 counter_offset_presp;
};
/**
* @ifname: Interface name (for multi-SSID/VLAN support)
* @priv: private driver interface data
* @alg: encryption algorithm (%WPA_ALG_NONE, %WPA_ALG_WEP,
- * %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK);
+ * %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK,
+ * %WPA_ALG_GCMP, %WPA_ALG_GCMP_256, %WPA_ALG_CCMP_256,
+ * %WPA_ALG_BIP_GMAC_128, %WPA_ALG_BIP_GMAC_256,
+ * %WPA_ALG_BIP_CMAC_256);
* %WPA_ALG_NONE clears the key.
* @addr: Address of the peer STA (BSSID of the current AP when setting
* pairwise key in station mode), ff:ff:ff:ff:ff:ff for
* for Rx keys (in most cases, this is only used with broadcast
* keys and set to zero for unicast keys); %NULL if not set
* @seq_len: length of the seq, depends on the algorithm:
- * TKIP: 6 octets, CCMP: 6 octets, IGTK: 6 octets
+ * TKIP: 6 octets, CCMP/GCMP: 6 octets, IGTK: 6 octets
* @key: key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key,
* 8-byte Rx Mic Key
* @key_len: length of the key buffer in octets (WEP: 5 or 13,
- * TKIP: 32, CCMP: 16, IGTK: 16)
+ * TKIP: 32, CCMP/GCMP: 16, IGTK: 16)
*
* Returns: 0 on success, -1 on failure
*
int (*deauthenticate)(void *priv, const u8 *addr, int reason_code);
/**
- * disassociate - Request driver to disassociate
- * @priv: private driver interface data
- * @addr: peer address (BSSID of the AP)
- * @reason_code: 16-bit reason code to be sent in the disassociation
- * frame
- *
- * Returns: 0 on success, -1 on failure
- */
- int (*disassociate)(void *priv, const u8 *addr, int reason_code);
-
- /**
* associate - Request driver to associate
* @priv: private driver interface data
* @params: association parameters
* @priv: Private driver interface data
* @data: IEEE 802.11 management frame with IEEE 802.11 header
* @data_len: Size of the management frame
+ * @noack: Do not wait for this frame to be acked (disable retries)
* Returns: 0 on success, -1 on failure
*/
- int (*send_mlme)(void *priv, const u8 *data, size_t data_len);
+ int (*send_mlme)(void *priv, const u8 *data, size_t data_len,
+ int noack);
/**
* update_ft_ies - Update FT (IEEE 802.11r) IEs
int (*set_country)(void *priv, const char *alpha2);
/**
+ * get_country - Get country
+ * @priv: Private driver interface data
+ * @alpha2: Buffer for returning country code (at least 3 octets)
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*get_country)(void *priv, char *alpha2);
+
+ /**
* global_init - Global driver initialization
* Returns: Pointer to private data (global), %NULL on failure
*
int (*set_ap)(void *priv, struct wpa_driver_ap_params *params);
/**
+ * set_acl - Set ACL in AP mode
+ * @priv: Private driver interface data
+ * @params: Parameters to configure ACL
+ * Returns: 0 on success, -1 on failure
+ *
+ * This is used only for the drivers which support MAC address ACL.
+ */
+ int (*set_acl)(void *priv, struct hostapd_acl_params *params);
+
+ /**
* hapd_init - Initialize driver interface (hostapd only)
* @hapd: Pointer to hostapd context
* @params: Configuration for the driver wrapper
* Returns: 0 on success, -1 on failure
*
* This function is used to fetch the last used TSC/packet number for
- * a TKIP, CCMP, or BIP/IGTK key. It is mainly used with group keys, so
- * there is no strict requirement on implementing support for unicast
- * keys (i.e., addr != %NULL).
+ * a TKIP, CCMP, GCMP, or BIP/IGTK key. It is mainly used with group
+ * keys, so there is no strict requirement on implementing support for
+ * unicast keys (i.e., addr != %NULL).
*/
int (*get_seqnum)(const char *ifname, void *priv, const u8 *addr,
int idx, u8 *seq);
int (*set_generic_elem)(void *priv, const u8 *elem, size_t elem_len);
/**
- * read_sta_data - Fetch station data (AP only)
+ * read_sta_data - Fetch station data
* @priv: Private driver interface data
* @data: Buffer for returning station information
* @addr: MAC address of the station
int total_flags, int flags_or, int flags_and);
/**
- * set_rate_sets - Set supported and basic rate sets (AP only)
- * @priv: Private driver interface data
- * @supp_rates: -1 terminated array of supported rates in 100 kbps
- * @basic_rates: -1 terminated array of basic rates in 100 kbps
- * @mode: hardware mode (HOSTAPD_MODE_*)
- * Returns: 0 on success, -1 on failure
- */
- int (*set_rate_sets)(void *priv, int *supp_rates, int *basic_rates,
- int mode);
-
- /**
* set_tx_queue_params - Set TX queue parameters
* @priv: Private driver interface data
* @queue: Queue number (0 = VO, 1 = VI, 2 = BE, 3 = BK)
* (this may differ from the requested addr if the driver cannot
* change interface address)
* @bridge: Bridge interface to use or %NULL if no bridge configured
+ * @use_existing: Whether to allow existing interface to be used
* Returns: 0 on success, -1 on failure
*/
int (*if_add)(void *priv, enum wpa_driver_if_type type,
const char *ifname, const u8 *addr, void *bss_ctx,
void **drv_priv, char *force_ifname, u8 *if_addr,
- const char *bridge);
+ const char *bridge, int use_existing);
/**
* if_remove - Remove a virtual interface
* @val: 1 = bind to 4-address WDS; 0 = unbind
* @bridge_ifname: Bridge interface to use for the WDS station or %NULL
* to indicate that bridge is not to be used
+ * @ifname_wds: Buffer to return the interface name for the new WDS
+ * station or %NULL to indicate name is not returned.
* Returns: 0 on success, -1 on failure
*/
int (*set_wds_sta)(void *priv, const u8 *addr, int aid, int val,
- const char *bridge_ifname);
+ const char *bridge_ifname, char *ifname_wds);
/**
* send_action - Transmit an Action frame
* @bssid: BSSID (Address 3)
* @data: Frame body
* @data_len: data length in octets
+ @ @no_cck: Whether CCK rates must not be used to transmit this frame
* Returns: 0 on success, -1 on failure
*
* This command can be used to request the driver to transmit an action
*/
int (*send_action)(void *priv, unsigned int freq, unsigned int wait,
const u8 *dst, const u8 *src, const u8 *bssid,
- const u8 *data, size_t data_len);
+ const u8 *data, size_t data_len, int no_cck);
/**
* send_action_cancel_wait - Cancel action frame TX wait
*
* This command is used to request the driver to remain awake on the
* specified channel for the specified duration and report received
- * Action frames with EVENT_RX_ACTION events. Optionally, received
+ * Action frames with EVENT_RX_MGMT events. Optionally, received
* Probe Request frames may also be requested to be reported by calling
* probe_req_report(). These will be reported with EVENT_RX_PROBE_REQ.
*
int (*probe_req_report)(void *priv, int report);
/**
- * disable_11b_rates - Set whether IEEE 802.11b rates are used for TX
+ * deinit_ap - Deinitialize AP mode
* @priv: Private driver interface data
- * @disabled: Whether IEEE 802.11b rates are disabled
* Returns: 0 on success, -1 on failure (or if not supported)
*
- * This command is used to disable IEEE 802.11b rates (1, 2, 5.5, and
- * 11 Mbps) as TX rates for data and management frames. This can be
- * used to optimize channel use when there is no need to support IEEE
- * 802.11b-only devices.
+ * This optional function can be used to disable AP mode related
+ * configuration. If the interface was not dynamically added,
+ * change the driver mode to station mode to allow normal station
+ * operations like scanning to be completed.
*/
- int (*disable_11b_rates)(void *priv, int disabled);
+ int (*deinit_ap)(void *priv);
/**
- * deinit_ap - Deinitialize AP mode
+ * deinit_p2p_cli - Deinitialize P2P client mode
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
- * This optional function can be used to disable AP mode related
- * configuration and change the driver mode to station mode to allow
- * normal station operations like scanning to be completed.
+ * This optional function can be used to disable P2P client mode. If the
+ * interface was not dynamically added, change the interface type back
+ * to station mode.
*/
- int (*deinit_ap)(void *priv);
+ int (*deinit_p2p_cli)(void *priv);
/**
* suspend - Notification on system suspend/hibernate event
const char * (*get_radio_name)(void *priv);
/**
- * p2p_find - Start P2P Device Discovery
- * @priv: Private driver interface data
- * @timeout: Timeout for find operation in seconds or 0 for no timeout
- * @type: Device Discovery type (enum p2p_discovery_type)
- * Returns: 0 on success, -1 on failure
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_find)(void *priv, unsigned int timeout, int type);
-
- /**
- * p2p_stop_find - Stop P2P Device Discovery
- * @priv: Private driver interface data
- * Returns: 0 on success, -1 on failure
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_stop_find)(void *priv);
-
- /**
- * p2p_listen - Start P2P Listen state for specified duration
- * @priv: Private driver interface data
- * @timeout: Listen state duration in milliseconds
- * Returns: 0 on success, -1 on failure
- *
- * This function can be used to request the P2P module to keep the
- * device discoverable on the listen channel for an extended set of
- * time. At least in its current form, this is mainly used for testing
- * purposes and may not be of much use for normal P2P operations.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_listen)(void *priv, unsigned int timeout);
-
- /**
- * p2p_connect - Start P2P group formation (GO negotiation)
- * @priv: Private driver interface data
- * @peer_addr: MAC address of the peer P2P client
- * @wps_method: enum p2p_wps_method value indicating config method
- * @go_intent: Local GO intent value (1..15)
- * @own_interface_addr: Intended interface address to use with the
- * group
- * @force_freq: The only allowed channel frequency in MHz or 0
- * @persistent_group: Whether to create persistent group
- * Returns: 0 on success, -1 on failure
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_connect)(void *priv, const u8 *peer_addr, int wps_method,
- int go_intent, const u8 *own_interface_addr,
- unsigned int force_freq, int persistent_group);
-
- /**
- * wps_success_cb - Report successfully completed WPS provisioning
- * @priv: Private driver interface data
- * @peer_addr: Peer address
- * Returns: 0 on success, -1 on failure
- *
- * This function is used to report successfully completed WPS
- * provisioning during group formation in both GO/Registrar and
- * client/Enrollee roles.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*wps_success_cb)(void *priv, const u8 *peer_addr);
-
- /**
- * p2p_group_formation_failed - Report failed WPS provisioning
- * @priv: Private driver interface data
- * Returns: 0 on success, -1 on failure
- *
- * This function is used to report failed group formation. This can
- * happen either due to failed WPS provisioning or due to 15 second
- * timeout during the provisioning phase.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_group_formation_failed)(void *priv);
-
- /**
- * p2p_set_params - Set P2P parameters
- * @priv: Private driver interface data
- * @params: P2P parameters
- * Returns: 0 on success, -1 on failure
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_set_params)(void *priv, const struct p2p_params *params);
-
- /**
- * p2p_prov_disc_req - Send Provision Discovery Request
- * @priv: Private driver interface data
- * @peer_addr: MAC address of the peer P2P client
- * @config_methods: WPS Config Methods value (only one bit set)
- * Returns: 0 on success, -1 on failure
- *
- * This function can be used to request a discovered P2P peer to
- * display a PIN (config_methods = WPS_CONFIG_DISPLAY) or be prepared
- * to enter a PIN from us (config_methods = WPS_CONFIG_KEYPAD). The
- * Provision Discovery Request frame is transmitted once immediately
- * and if no response is received, the frame will be sent again
- * whenever the target device is discovered during device dsicovery
- * (start with a p2p_find() call). Response from the peer is indicated
- * with the EVENT_P2P_PROV_DISC_RESPONSE event.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_prov_disc_req)(void *priv, const u8 *peer_addr,
- u16 config_methods);
-
- /**
- * p2p_sd_request - Schedule a service discovery query
- * @priv: Private driver interface data
- * @dst: Destination peer or %NULL to apply for all peers
- * @tlvs: P2P Service Query TLV(s)
- * Returns: Reference to the query or 0 on failure
- *
- * Response to the query is indicated with the
- * EVENT_P2P_SD_RESPONSE driver event.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- u64 (*p2p_sd_request)(void *priv, const u8 *dst,
- const struct wpabuf *tlvs);
-
- /**
- * p2p_sd_cancel_request - Cancel a pending service discovery query
- * @priv: Private driver interface data
- * @req: Query reference from p2p_sd_request()
- * Returns: 0 on success, -1 on failure
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_sd_cancel_request)(void *priv, u64 req);
-
- /**
- * p2p_sd_response - Send response to a service discovery query
- * @priv: Private driver interface data
- * @freq: Frequency from EVENT_P2P_SD_REQUEST event
- * @dst: Destination address from EVENT_P2P_SD_REQUEST event
- * @dialog_token: Dialog token from EVENT_P2P_SD_REQUEST event
- * @resp_tlvs: P2P Service Response TLV(s)
- * Returns: 0 on success, -1 on failure
- *
- * This function is called as a response to the request indicated with
- * the EVENT_P2P_SD_REQUEST driver event.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_sd_response)(void *priv, int freq, const u8 *dst,
- u8 dialog_token,
- const struct wpabuf *resp_tlvs);
-
- /**
- * p2p_service_update - Indicate a change in local services
- * @priv: Private driver interface data
- * Returns: 0 on success, -1 on failure
- *
- * This function needs to be called whenever there is a change in
- * availability of the local services. This will increment the
- * Service Update Indicator value which will be used in SD Request and
- * Response frames.
- *
- * This function is only used if the driver implements P2P management,
- * i.e., if it sets WPA_DRIVER_FLAGS_P2P_MGMT in
- * struct wpa_driver_capa.
- */
- int (*p2p_service_update)(void *priv);
-
- /**
- * p2p_reject - Reject peer device (explicitly block connections)
- * @priv: Private driver interface data
- * @addr: MAC address of the peer
- * Returns: 0 on success, -1 on failure
- */
- int (*p2p_reject)(void *priv, const u8 *addr);
-
- /**
- * p2p_invite - Invite a P2P Device into a group
- * @priv: Private driver interface data
- * @peer: Device Address of the peer P2P Device
- * @role: Local role in the group
- * @bssid: Group BSSID or %NULL if not known
- * @ssid: Group SSID
- * @ssid_len: Length of ssid in octets
- * @go_dev_addr: Forced GO Device Address or %NULL if none
- * @persistent_group: Whether this is to reinvoke a persistent group
- * Returns: 0 on success, -1 on failure
- */
- int (*p2p_invite)(void *priv, const u8 *peer, int role,
- const u8 *bssid, const u8 *ssid, size_t ssid_len,
- const u8 *go_dev_addr, int persistent_group);
-
- /**
* send_tdls_mgmt - for sending TDLS management packets
* @priv: private driver interface data
* @dst: Destination (peer) MAC address
int (*tdls_oper)(void *priv, enum tdls_oper oper, const u8 *peer);
/**
+ * wnm_oper - Notify driver of the WNM frame reception
+ * @priv: Private driver interface data
+ * @oper: WNM operation. See %enum wnm_oper
+ * @peer: Destination (peer) MAC address
+ * @buf: Buffer for the driver to fill in (for getting IE)
+ * @buf_len: Return the len of buf
+ * Returns: 0 on success, negative (<0) on failure
+ */
+ int (*wnm_oper)(void *priv, enum wnm_oper oper, const u8 *peer,
+ u8 *buf, u16 *buf_len);
+
+ /**
+ * set_qos_map - Set QoS Map
+ * @priv: Private driver interface data
+ * @qos_map_set: QoS Map
+ * @qos_map_set_len: Length of QoS Map
+ */
+ int (*set_qos_map)(void *priv, const u8 *qos_map_set,
+ u8 qos_map_set_len);
+
+ /**
* signal_poll - Get current connection information
* @priv: Private driver interface data
* @signal_info: Connection info structure
*/
int (*set_authmode)(void *priv, int authmode);
+#ifdef ANDROID
+ /**
+ * driver_cmd - Execute driver-specific command
+ * @priv: Private driver interface data
+ * @cmd: Command to execute
+ * @buf: Return buffer
+ * @buf_len: Buffer length
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*driver_cmd)(void *priv, char *cmd, char *buf, size_t buf_len);
+#endif /* ANDROID */
+
/**
* set_rekey_info - Set rekey information
* @priv: Private driver interface data
*/
void (*poll_client)(void *priv, const u8 *own_addr,
const u8 *addr, int qos);
+
+ /**
+ * radio_disable - Disable/enable radio
+ * @priv: Private driver interface data
+ * @disabled: 1=disable 0=enable radio
+ * Returns: 0 on success, -1 on failure
+ *
+ * This optional command is for testing purposes. It can be used to
+ * disable the radio on a testbed device to simulate out-of-radio-range
+ * conditions.
+ */
+ int (*radio_disable)(void *priv, int disabled);
+
+ /**
+ * switch_channel - Announce channel switch and migrate the GO to the
+ * given frequency
+ * @priv: Private driver interface data
+ * @settings: Settings for CSA period and new channel
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function is used to move the GO to the legacy STA channel to
+ * avoid frequency conflict in single channel concurrency.
+ */
+ int (*switch_channel)(void *priv, struct csa_settings *settings);
+
+ /**
+ * start_dfs_cac - Listen for radar interference on the channel
+ * @priv: Private driver interface data
+ * @freq: Channel parameters
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*start_dfs_cac)(void *priv, struct hostapd_freq_params *freq);
+
+ /**
+ * stop_ap - Removes beacon from AP
+ * @priv: Private driver interface data
+ * Returns: 0 on success, -1 on failure (or if not supported)
+ *
+ * This optional function can be used to disable AP mode related
+ * configuration. Unlike deinit_ap, it does not change to station
+ * mode.
+ */
+ int (*stop_ap)(void *priv);
+
+ /**
+ * get_survey - Retrieve survey data
+ * @priv: Private driver interface data
+ * @freq: If set, survey data for the specified frequency is only
+ * being requested. If not set, all survey data is requested.
+ * Returns: 0 on success, -1 on failure
+ *
+ * Use this to retrieve:
+ *
+ * - the observed channel noise floor
+ * - the amount of time we have spent on the channel
+ * - the amount of time during which we have spent on the channel that
+ * the radio has determined the medium is busy and we cannot
+ * transmit
+ * - the amount of time we have spent receiving data
+ * - the amount of time we have spent transmitting data
+ *
+ * This data can be used for spectrum heuristics. One example is
+ * Automatic Channel Selection (ACS). The channel survey data is
+ * kept on a linked list on the channel data, one entry is added
+ * for each survey. The min_nf of the channel is updated for each
+ * survey.
+ */
+ int (*get_survey)(void *priv, unsigned int freq);
+
+ /**
+ * status - Get driver interface status information
+ * @priv: Private driver interface data
+ * @buf: Buffer for printing tou the status information
+ * @buflen: Maximum length of the buffer
+ * Returns: Length of written status information or -1 on failure
+ */
+ int (*status)(void *priv, char *buf, size_t buflen);
};
EVENT_RX_MGMT,
/**
- * EVENT_RX_ACTION - Action frame received
- *
- * This event is used to indicate when an Action frame has been
- * received. Information about the received frame is included in
- * union wpa_event_data::rx_action.
- */
- EVENT_RX_ACTION,
-
- /**
* EVENT_REMAIN_ON_CHANNEL - Remain-on-channel duration started
*
* This event is used to indicate when the driver has started the
EVENT_STATION_LOW_ACK,
/**
- * EVENT_P2P_DEV_FOUND - Report a discovered P2P device
- *
- * This event is used only if the driver implements P2P management
- * internally. Event data is stored in
- * union wpa_event_data::p2p_dev_found.
- */
- EVENT_P2P_DEV_FOUND,
-
- /**
- * EVENT_P2P_GO_NEG_REQ_RX - Report reception of GO Negotiation Request
- *
- * This event is used only if the driver implements P2P management
- * internally. Event data is stored in
- * union wpa_event_data::p2p_go_neg_req_rx.
- */
- EVENT_P2P_GO_NEG_REQ_RX,
-
- /**
- * EVENT_P2P_GO_NEG_COMPLETED - Report completion of GO Negotiation
- *
- * This event is used only if the driver implements P2P management
- * internally. Event data is stored in
- * union wpa_event_data::p2p_go_neg_completed.
- */
- EVENT_P2P_GO_NEG_COMPLETED,
-
- EVENT_P2P_PROV_DISC_REQUEST,
- EVENT_P2P_PROV_DISC_RESPONSE,
- EVENT_P2P_SD_REQUEST,
- EVENT_P2P_SD_RESPONSE,
-
- /**
* EVENT_IBSS_PEER_LOST - IBSS peer not reachable anymore
*/
EVENT_IBSS_PEER_LOST,
* This event indicates that the station responded to the poll
* initiated with @poll_client.
*/
- EVENT_DRIVER_CLIENT_POLL_OK
+ EVENT_DRIVER_CLIENT_POLL_OK,
+
+ /**
+ * EVENT_EAPOL_TX_STATUS - notify of EAPOL TX status
+ */
+ EVENT_EAPOL_TX_STATUS,
+
+ /**
+ * EVENT_CH_SWITCH - AP or GO decided to switch channels
+ *
+ * Described in wpa_event_data.ch_switch
+ * */
+ EVENT_CH_SWITCH,
+
+ /**
+ * EVENT_WNM - Request WNM operation
+ *
+ * This event can be used to request a WNM operation to be performed.
+ */
+ EVENT_WNM,
+
+ /**
+ * EVENT_CONNECT_FAILED_REASON - Connection failure reason in AP mode
+ *
+ * This event indicates that the driver reported a connection failure
+ * with the specified client (for example, max client reached, etc.) in
+ * AP mode.
+ */
+ EVENT_CONNECT_FAILED_REASON,
+
+ /**
+ * EVENT_RADAR_DETECTED - Notify of radar detection
+ *
+ * A radar has been detected on the supplied frequency, hostapd should
+ * react accordingly (e.g., change channel).
+ */
+ EVENT_DFS_RADAR_DETECTED,
+
+ /**
+ * EVENT_CAC_FINISHED - Notify that channel availability check has been completed
+ *
+ * After a successful CAC, the channel can be marked clear and used.
+ */
+ EVENT_DFS_CAC_FINISHED,
+
+ /**
+ * EVENT_CAC_ABORTED - Notify that channel availability check has been aborted
+ *
+ * The CAC was not successful, and the channel remains in the previous
+ * state. This may happen due to a radar beeing detected or other
+ * external influences.
+ */
+ EVENT_DFS_CAC_ABORTED,
+
+ /**
+ * EVENT_DFS_CAC_NOP_FINISHED - Notify that non-occupancy period is over
+ *
+ * The channel which was previously unavailable is now available again.
+ */
+ EVENT_DFS_NOP_FINISHED,
+
+ /**
+ * EVENT_SURVEY - Received survey data
+ *
+ * This event gets triggered when a driver query is issued for survey
+ * data and the requested data becomes available. The returned data is
+ * stored in struct survey_results. The results provide at most one
+ * survey entry for each frequency and at minimum will provide one
+ * survey entry for one frequency. The survey data can be os_malloc()'d
+ * and then os_free()'d, so the event callback must only copy data.
+ */
+ EVENT_SURVEY,
+
+ /**
+ * EVENT_SCAN_STARTED - Scan started
+ *
+ * This indicates that driver has started a scan operation either based
+ * on a request from wpa_supplicant/hostapd or from another application.
+ * EVENT_SCAN_RESULTS is used to indicate when the scan has been
+ * completed (either successfully or by getting cancelled).
+ */
+ EVENT_SCAN_STARTED
};
/**
+ * struct freq_survey - Channel survey info
+ *
+ * @ifidx: Interface index in which this survey was observed
+ * @freq: Center of frequency of the surveyed channel
+ * @nf: Channel noise floor in dBm
+ * @channel_time: Amount of time in ms the radio spent on the channel
+ * @channel_time_busy: Amount of time in ms the radio detected some signal
+ * that indicated to the radio the channel was not clear
+ * @channel_time_rx: Amount of time the radio spent receiving data
+ * @channel_time_tx: Amount of time the radio spent transmitting data
+ * @filled: bitmask indicating which fields have been reported, see
+ * SURVEY_HAS_* defines.
+ * @list: Internal list pointers
+ */
+struct freq_survey {
+ u32 ifidx;
+ unsigned int freq;
+ s8 nf;
+ u64 channel_time;
+ u64 channel_time_busy;
+ u64 channel_time_rx;
+ u64 channel_time_tx;
+ unsigned int filled;
+ struct dl_list list;
+};
+
+#define SURVEY_HAS_NF BIT(0)
+#define SURVEY_HAS_CHAN_TIME BIT(1)
+#define SURVEY_HAS_CHAN_TIME_BUSY BIT(2)
+#define SURVEY_HAS_CHAN_TIME_RX BIT(3)
+#define SURVEY_HAS_CHAN_TIME_TX BIT(4)
+
+
+/**
* union wpa_event_data - Additional data for wpa_supplicant_event() calls
*/
union wpa_event_data {
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
+
+ /**
+ * locally_generated - Whether the frame was locally generated
+ */
+ int locally_generated;
} disassoc_info;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
+
+ /**
+ * locally_generated - Whether the frame was locally generated
+ */
+ int locally_generated;
} deauth_info;
/**
} tdls;
/**
+ * struct wnm - Data for EVENT_WNM
+ */
+ struct wnm {
+ u8 addr[ETH_ALEN];
+ enum {
+ WNM_OPER_SLEEP,
+ } oper;
+ enum {
+ WNM_SLEEP_ENTER,
+ WNM_SLEEP_EXIT
+ } sleep_action;
+ int sleep_intval;
+ u16 reason_code;
+ u8 *buf;
+ u16 buf_len;
+ } wnm;
+
+ /**
* struct ft_ies - FT information elements (EVENT_FT_RESPONSE)
*
* During FT (IEEE 802.11r) authentication sequence, the driver is
const u8 *frame;
size_t frame_len;
u32 datarate;
- u32 ssi_signal;
- } rx_mgmt;
-
- /**
- * struct rx_action - Data for EVENT_RX_ACTION events
- */
- struct rx_action {
- /**
- * da - Destination address of the received Action frame
- */
- const u8 *da;
-
- /**
- * sa - Source address of the received Action frame
- */
- const u8 *sa;
/**
- * bssid - Address 3 of the received Action frame
- */
- const u8 *bssid;
-
- /**
- * category - Action frame category
- */
- u8 category;
-
- /**
- * data - Action frame body after category field
- */
- const u8 *data;
-
- /**
- * len - Length of data in octets
+ * freq - Frequency (in MHz) on which the frame was received
*/
- size_t len;
+ int freq;
/**
- * freq - Frequency (in MHz) on which the frame was received
+ * ssi_signal - Signal strength in dBm (or 0 if not available)
*/
- int freq;
- } rx_action;
+ int ssi_signal;
+ } rx_mgmt;
/**
* struct remain_on_channel - Data for EVENT_REMAIN_ON_CHANNEL events
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
+
+ /**
+ * signal - signal strength in dBm (or 0 if not available)
+ */
+ int ssi_signal;
} rx_probe_req;
/**
} low_ack;
/**
- * struct p2p_dev_found - Data for EVENT_P2P_DEV_FOUND
- */
- struct p2p_dev_found {
- const u8 *addr;
- const u8 *dev_addr;
- const u8 *pri_dev_type;
- const char *dev_name;
- u16 config_methods;
- u8 dev_capab;
- u8 group_capab;
- } p2p_dev_found;
-
- /**
- * struct p2p_go_neg_req_rx - Data for EVENT_P2P_GO_NEG_REQ_RX
- */
- struct p2p_go_neg_req_rx {
- const u8 *src;
- u16 dev_passwd_id;
- } p2p_go_neg_req_rx;
-
- /**
- * struct p2p_go_neg_completed - Data for EVENT_P2P_GO_NEG_COMPLETED
- */
- struct p2p_go_neg_completed {
- struct p2p_go_neg_results *res;
- } p2p_go_neg_completed;
-
- struct p2p_prov_disc_req {
- const u8 *peer;
- u16 config_methods;
- const u8 *dev_addr;
- const u8 *pri_dev_type;
- const char *dev_name;
- u16 supp_config_methods;
- u8 dev_capab;
- u8 group_capab;
- } p2p_prov_disc_req;
-
- struct p2p_prov_disc_resp {
- const u8 *peer;
- u16 config_methods;
- } p2p_prov_disc_resp;
-
- struct p2p_sd_req {
- int freq;
- const u8 *sa;
- u8 dialog_token;
- u16 update_indic;
- const u8 *tlvs;
- size_t tlvs_len;
- } p2p_sd_req;
-
- struct p2p_sd_resp {
- const u8 *sa;
- u16 update_indic;
- const u8 *tlvs;
- size_t tlvs_len;
- } p2p_sd_resp;
-
- /**
* struct ibss_peer_lost - Data for EVENT_IBSS_PEER_LOST
*/
struct ibss_peer_lost {
struct client_poll {
u8 addr[ETH_ALEN];
} client_poll;
+
+ /**
+ * struct eapol_tx_status
+ * @dst: Original destination
+ * @data: Data starting with IEEE 802.1X header (!)
+ * @data_len: Length of data
+ * @ack: Indicates ack or lost frame
+ *
+ * This corresponds to hapd_send_eapol if the frame sent
+ * there isn't just reported as EVENT_TX_STATUS.
+ */
+ struct eapol_tx_status {
+ const u8 *dst;
+ const u8 *data;
+ int data_len;
+ int ack;
+ } eapol_tx_status;
+
+ /**
+ * struct ch_switch
+ * @freq: Frequency of new channel in MHz
+ * @ht_enabled: Whether this is an HT channel
+ * @ch_offset: Secondary channel offset
+ * @ch_width: Channel width
+ * @cf1: Center frequency 1
+ * @cf2: Center frequency 2
+ */
+ struct ch_switch {
+ int freq;
+ int ht_enabled;
+ int ch_offset;
+ enum chan_width ch_width;
+ int cf1;
+ int cf2;
+ } ch_switch;
+
+ /**
+ * struct connect_failed - Data for EVENT_CONNECT_FAILED_REASON
+ * @addr: Remote client address
+ * @code: Reason code for connection failure
+ */
+ struct connect_failed_reason {
+ u8 addr[ETH_ALEN];
+ enum {
+ MAX_CLIENT_REACHED,
+ BLOCKED_CLIENT
+ } code;
+ } connect_failed_reason;
+
+ /**
+ * struct dfs_event - Data for radar detected events
+ * @freq: Frequency of the channel in MHz
+ */
+ struct dfs_event {
+ int freq;
+ int ht_enabled;
+ int chan_offset;
+ enum chan_width chan_width;
+ int cf1;
+ int cf2;
+ } dfs_event;
+
+ /**
+ * survey_results - Survey result data for EVENT_SURVEY
+ * @freq_filter: Requested frequency survey filter, 0 if request
+ * was for all survey data
+ * @survey_list: Linked list of survey data
+ */
+ struct survey_results {
+ unsigned int freq_filter;
+ struct dl_list survey_list; /* struct freq_survey */
+ } survey_results;
+
+ /**
+ * channel_list_changed - Data for EVENT_CHANNEL_LIST_CHANGED
+ * @initiator: Initiator of the regulatory change
+ */
+ struct channel_list_changed {
+ enum reg_change_initiator initiator;
+ } channel_list_changed;
};
/**
wpa_supplicant_event(ctx, EVENT_EAPOL_RX, &event);
}
-static inline void wpa_scan_results_free(struct wpa_scan_results *res)
-{
- size_t i;
+/* driver_common.c */
+void wpa_scan_results_free(struct wpa_scan_results *res);
- if (res == NULL)
- return;
+/* Convert wpa_event_type to a string for logging */
+const char * event_to_string(enum wpa_event_type event);
- for (i = 0; i < res->num; i++)
- os_free(res->res[i]);
- os_free(res->res);
- os_free(res);
-}
+/* NULL terminated array of linked in driver wrappers */
+extern struct wpa_driver_ops *wpa_drivers[];
#endif /* DRIVER_H */