# This software may be distributed under the terms of the BSD license.
# See README for more details.
+from remotehost import remote_compatible
import binascii
import struct
import time
from utils import alloc_fail, wait_fail_trigger
from wlantest import Wlantest
+@remote_compatible
def test_wnm_bss_transition_mgmt(dev, apdev):
"""WNM BSS Transition Management"""
params = { "ssid": "test-wnm",
dev[0].connect("test-wnm", key_mgmt="NONE", scan_freq="2412")
dev[0].request("WNM_BSS_QUERY 0")
+@remote_compatible
def test_wnm_disassoc_imminent(dev, apdev):
"""WNM Disassociation Imminent"""
params = { "ssid": "test-wnm",
if ev is None:
raise Exception("Timeout while waiting for re-connection scan")
+@remote_compatible
def test_wnm_ess_disassoc_imminent(dev, apdev):
"""WNM ESS Disassociation Imminent"""
params = { "ssid": "test-wnm",
if ev is None:
raise Exception("Timeout while waiting for re-connection scan")
+def test_wnm_ess_disassoc_imminent_reject(dev, apdev):
+ """WNM ESS Disassociation Imminent getting rejected"""
+ params = { "ssid": "test-wnm",
+ "bss_transition": "1" }
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ dev[0].connect("test-wnm", key_mgmt="NONE", scan_freq="2412")
+ addr = dev[0].own_addr()
+ if "OK" not in dev[0].request("SET reject_btm_req_reason 123"):
+ raise Exception("Failed to set reject_btm_req_reason")
+
+ hapd.request("ESS_DISASSOC " + addr + " 1 http://example.com/session-info")
+ ev = hapd.wait_event(["BSS-TM-RESP"], timeout=10)
+ if ev is None:
+ raise Exception("BSS-TM-RESP not seen")
+ if "status_code=123" not in ev:
+ raise Exception("Unexpected response status: " + ev)
+ dev[0].wait_disconnected()
+ dev[0].request("DISCONNECT")
+
+@remote_compatible
def test_wnm_ess_disassoc_imminent_pmf(dev, apdev):
"""WNM ESS Disassociation Imminent"""
params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
- params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
- params["ieee80211w"] = "2";
+ params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
+ params["ieee80211w"] = "2"
params["bss_transition"] = "1"
hapd = hostapd.add_ap(apdev[0], params)
if not ok:
raise Exception("Station failed to exit WNM-Sleep Mode")
+@remote_compatible
def test_wnm_sleep_mode_open(dev, apdev):
"""WNM Sleep Mode - open"""
params = { "ssid": "test-wnm",
if "FAIL" not in dev[0].request("WNM_SLEEP " + cmd):
raise Exception("Invalid WNM_SLEEP accepted")
+@remote_compatible
def test_wnm_sleep_mode_rsn(dev, apdev):
"""WNM Sleep Mode - RSN"""
params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
raise Exception("No connection event received from hostapd")
check_wnm_sleep_mode_enter_exit(hapd, dev[0])
+@remote_compatible
def test_wnm_sleep_mode_ap_oom(dev, apdev):
"""WNM Sleep Mode - AP side OOM"""
params = { "ssid": "test-wnm",
dev[0].request("WNM_SLEEP exit")
wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
+@remote_compatible
def test_wnm_sleep_mode_rsn_pmf(dev, apdev):
"""WNM Sleep Mode - RSN with PMF"""
- wt = Wlantest()
- wt.flush()
- wt.add_passphrase("12345678")
params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
- params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
- params["ieee80211w"] = "2";
+ params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
+ params["ieee80211w"] = "2"
params["time_advertisement"] = "2"
params["time_zone"] = "EST5"
params["wnm_sleep_mode"] = "1"
params["bss_transition"] = "1"
hapd = hostapd.add_ap(apdev[0], params)
+ Wlantest.setup(hapd)
+ wt = Wlantest()
+ wt.flush()
+ wt.add_passphrase("12345678")
+
dev[0].connect("test-wnm-rsn", psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK-SHA256", proto="WPA2", scan_freq="2412")
ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5)
if "ok=1" not in ev:
raise Exception("Action frame not acknowledged")
+@remote_compatible
def test_wnm_bss_tm_req(dev, apdev):
"""BSS Transition Management Request"""
params = { "ssid": "test-wnm", "bss_transition": "1" }
hapd.mgmt_tx(req)
resp = rx_bss_tm_resp(hapd, expect_dialog=8, expect_status=7)
+@remote_compatible
def test_wnm_bss_keep_alive(dev, apdev):
"""WNM keep-alive"""
params = { "ssid": "test-wnm",
raise Exception("Unexpected scan started")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=0.5)
if ev is not None:
- raise Exception("Unexpected reassociation");
+ raise Exception("Unexpected reassociation")
finally:
dev[0].request("DISCONNECT")
if hapd:
hapd.mgmt_tx(msg)
expect_ack(hapd)
+@remote_compatible
def test_wnm_action_proto_pmf(dev, apdev):
"""WNM Action protocol testing (PMF enabled)"""
ssid = "test-wnm-pmf"
hapd.mgmt_tx(msg)
expect_ack(hapd)
+@remote_compatible
def test_wnm_action_proto_no_pmf(dev, apdev):
"""WNM Action protocol testing (PMF disabled)"""
ssid = "test-wnm-no-pmf"
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
if "OK" not in dev[0].request("SET mbo_cell_capa 1"):
- raise Exception("Failed to set STA as cellular data capable")
+ raise Exception("Failed to set STA as cellular data capable")
dev[0].connect(ssid, psk="12345678", key_mgmt="WPA-PSK",
proto="WPA2", ieee80211w="0", scan_freq="2412")
logger.debug("BTM request with MBO reassociation delay when disassoc imminent is not set")
if 'FAIL' not in hapd.request("BSS_TM_REQ " + dev[0].own_addr() + " mbo=3:2:1"):
- raise Exception("BSS transition management succeeded unexpectedly")
+ raise Exception("BSS transition management succeeded unexpectedly")
logger.debug("BTM request with invalid MBO transition reason code")
if 'FAIL' not in hapd.request("BSS_TM_REQ " + dev[0].own_addr() + " mbo=10:2:1"):
- raise Exception("BSS transition management succeeded unexpectedly")
+ raise Exception("BSS transition management succeeded unexpectedly")
logger.debug("BTM request with MBO reassociation retry delay of 5 seconds")
if 'OK' not in hapd.request("BSS_TM_REQ " + dev[0].own_addr() + " disassoc_imminent=1 disassoc_timer=3 mbo=3:5:1"):
- raise Exception("BSS transition management command failed")
+ raise Exception("BSS transition management command failed")
ev = dev[0].wait_event(['MBO-CELL-PREFERENCE'], 1)
if ev is None or "preference=1" not in ev:
- raise Exception("Timeout waiting for MBO-CELL-PREFERENCE event")
+ raise Exception("Timeout waiting for MBO-CELL-PREFERENCE event")
ev = dev[0].wait_event(['MBO-TRANSITION-REASON'], 1)
if ev is None or "reason=3" not in ev:
- raise Exception("Timeout waiting for MBO-TRANSITION-REASON event")
+ raise Exception("Timeout waiting for MBO-TRANSITION-REASON event")
ev = hapd.wait_event(['BSS-TM-RESP'], timeout=10)
if ev is None:
- raise Exception("No BSS Transition Management Response")
+ raise Exception("No BSS Transition Management Response")
if dev[0].own_addr() not in ev:
- raise Exception("Unexpected BSS Transition Management Response address")
+ raise Exception("Unexpected BSS Transition Management Response address")
ev = dev[0].wait_event(['CTRL-EVENT-DISCONNECTED'], 5)
if ev is None:
- raise Exception("Station did not disconnect although disassoc imminent was set")
+ raise Exception("Station did not disconnect although disassoc imminent was set")
# Set the scan interval to make dev[0] look for connections
if 'OK' not in dev[0].request("SCAN_INTERVAL 1"):
- raise Exception("Failed to set scan interval")
+ raise Exception("Failed to set scan interval")
# Make sure no connection is made during the retry delay
ev = dev[0].wait_event(['CTRL-EVENT-CONNECTED'], 5)
if ev is not None:
- raise Exception("Station connected before assoc retry delay was over")
+ raise Exception("Station connected before assoc retry delay was over")
# After the assoc retry delay is over, we can reconnect
ev = dev[0].wait_event(['CTRL-EVENT-CONNECTED'], 5)
if ev is None:
- raise Exception("Station did not connect after assoc retry delay is over")
+ raise Exception("Station did not connect after assoc retry delay is over")
if "OK" not in dev[0].request("SET mbo_cell_capa 3"):
- raise Exception("Failed to set STA as cellular data not-capable")
+ raise Exception("Failed to set STA as cellular data not-capable")
+@remote_compatible
def test_wnm_bss_transition_mgmt_query(dev, apdev):
"""WNM BSS Transition Management query"""
params = { "ssid": "test-wnm",
if ev is None:
raise Exception("No BSS Transition Management Response frame seen")
+@remote_compatible
def test_wnm_bss_tm_security_mismatch(dev, apdev):
"""WNM BSS Transition Management and security mismatch"""
params = { "ssid": "test-wnm",
raise Exception("No reassociation seen")
if apdev[1]['bssid'] not in ev:
raise Exception("Unexpected reassociation target: " + ev)
+
+def test_wnm_bss_tm_reject(dev, apdev):
+ """WNM BSS Transition Management request getting rejected"""
+ try:
+ hapd = None
+ params = { "ssid": "test-wnm",
+ "country_code": "FI",
+ "ieee80211d": "1",
+ "hw_mode": "g",
+ "channel": "1",
+ "bss_transition": "1" }
+ hapd = hostapd.add_ap(apdev[0], params)
+
+ id = dev[0].connect("test-wnm", key_mgmt="NONE", scan_freq="2412")
+ addr = dev[0].own_addr()
+ dev[0].dump_monitor()
+
+ if "OK" not in dev[0].request("SET reject_btm_req_reason 123"):
+ raise Exception("Failed to set reject_btm_req_reason")
+
+ if "OK" not in hapd.request("BSS_TM_REQ " + addr + " disassoc_timer=1"):
+ raise Exception("BSS_TM_REQ command failed")
+ ev = hapd.wait_event(['BSS-TM-RESP'], timeout=10)
+ if ev is None:
+ raise Exception("No BSS Transition Management Response")
+ if addr not in ev:
+ raise Exception("Unexpected BSS Transition Management Response address")
+ if "status_code=123" not in ev:
+ raise Exception("Unexpected BSS Transition Management Response status: " + ev)
+ dev[0].wait_disconnected()
+ finally:
+ dev[0].request("DISCONNECT")
+ if hapd:
+ hapd.request("DISABLE")
+ subprocess.call(['iw', 'reg', 'set', '00'])
+ dev[0].flush_scan_cache()
projects / mech_eap.git / blobdiff