# This software may be distributed under the terms of the BSD license.
# See README for more details.
+import logging
+logger = logging.getLogger()
+import subprocess
-def check_mesh_scan(dev, params, other_started=False):
+import hwsim_utils
+from wpasupplicant import WpaSupplicant
+from utils import HwsimSkip, alloc_fail
+
+def check_mesh_support(dev, secure=False):
+ if "MESH" not in dev.get_capability("modes"):
+ raise HwsimSkip("Driver does not support mesh")
+ if secure and "SAE" not in dev.get_capability("auth_alg"):
+ raise HwsimSkip("SAE not supported")
+
+def check_mesh_scan(dev, params, other_started=False, beacon_int=0):
if not other_started:
dev.dump_monitor()
id = dev.request("SCAN " + params)
if res.find("[MESH]") < 0:
raise Exception("Scan did not contain a MESH network")
+ bssid = res.splitlines()[1].split(' ')[0]
+ bss = dev.get_bss(bssid)
+ if bss is None:
+ raise Exception("Could not get BSS entry for mesh")
+ if 'mesh_capability' not in bss:
+ raise Exception("mesh_capability missing from BSS entry")
+ if beacon_int:
+ if 'beacon_int' not in bss:
+ raise Exception("beacon_int missing from BSS entry")
+ if str(beacon_int) != bss['beacon_int']:
+ raise Exception("Unexpected beacon_int in BSS entry: " + bss['beacon_int'])
def check_mesh_group_added(dev):
ev = dev.wait_event(["MESH-GROUP-STARTED"])
raise Exception("Test exception: Couldn't leave mesh")
-def check_mesh_peer_connected(dev):
- ev = dev.wait_event(["MESH-PEER-CONNECTED"])
+def check_mesh_peer_connected(dev, timeout=10):
+ ev = dev.wait_event(["MESH-PEER-CONNECTED"], timeout=timeout)
if ev is None:
raise Exception("Test exception: Remote peer did not connect.")
def test_wpas_add_set_remove_support(dev):
"""wpa_supplicant MESH add/set/remove network support"""
+ check_mesh_support(dev[0])
id = dev[0].add_network()
dev[0].set_network(id, "mode", "5")
dev[0].remove_network(id)
+def add_open_mesh_network(dev, freq="2412", start=True, beacon_int=0):
+ id = dev.add_network()
+ dev.set_network(id, "mode", "5")
+ dev.set_network_quoted(id, "ssid", "wpas-mesh-open")
+ dev.set_network(id, "key_mgmt", "NONE")
+ dev.set_network(id, "frequency", freq)
+ if beacon_int:
+ dev.set_network(id, "beacon_int", str(beacon_int))
+ if start:
+ dev.mesh_group_add(id)
+ return id
def test_wpas_mesh_group_added(dev):
"""wpa_supplicant MESH group add"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].mesh_group_add(id)
+ check_mesh_support(dev[0])
+ add_open_mesh_network(dev[0])
# Check for MESH-GROUP-STARTED event
check_mesh_group_added(dev[0])
def test_wpas_mesh_group_remove(dev):
"""wpa_supplicant MESH group remove"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].mesh_group_add(id)
+ check_mesh_support(dev[0])
+ add_open_mesh_network(dev[0])
# Check for MESH-GROUP-STARTED event
check_mesh_group_added(dev[0])
dev[0].mesh_group_remove()
# Check for MESH-GROUP-REMOVED event
check_mesh_group_removed(dev[0])
-
+ dev[0].mesh_group_remove()
def test_wpas_mesh_peer_connected(dev):
"""wpa_supplicant MESH peer connected"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].mesh_group_add(id)
-
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[1].set_network(id, "key_mgmt", "NONE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].mesh_group_add(id)
+ check_mesh_support(dev[0])
+ add_open_mesh_network(dev[0], beacon_int=160)
+ add_open_mesh_network(dev[1], beacon_int=160)
# Check for mesh joined
check_mesh_group_added(dev[0])
def test_wpas_mesh_peer_disconnected(dev):
"""wpa_supplicant MESH peer disconnected"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].mesh_group_add(id)
-
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[1].set_network(id, "key_mgmt", "NONE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].mesh_group_add(id)
+ check_mesh_support(dev[0])
+ add_open_mesh_network(dev[0])
+ add_open_mesh_network(dev[1])
# Check for mesh joined
check_mesh_group_added(dev[0])
def test_wpas_mesh_mode_scan(dev):
"""wpa_supplicant MESH scan support"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].set_network(id, "mesh_ht_mode", "HT40+")
- dev[0].mesh_group_add(id)
-
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[1].set_network(id, "key_mgmt", "NONE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].set_network(id, "mesh_ht_mode", "HT40+")
- dev[1].mesh_group_add(id)
+ check_mesh_support(dev[0])
+ add_open_mesh_network(dev[0])
+ add_open_mesh_network(dev[1], beacon_int=175)
# Check for mesh joined
check_mesh_group_added(dev[0])
check_mesh_group_added(dev[1])
# Check for Mesh scan
- check_mesh_scan(dev[0], "use_id=1")
-
+ check_mesh_scan(dev[0], "use_id=1", beacon_int=175)
-def wrap_wpas_mesh_test(test, dev, apdev):
- import hwsim_utils
+def test_wpas_mesh_open(dev, apdev):
+ """wpa_supplicant open MESH network connectivity"""
+ check_mesh_support(dev[0])
+ add_open_mesh_network(dev[0], freq="2462")
+ add_open_mesh_network(dev[1], freq="2462")
- def _test_connectivity(dev1, dev2):
- return hwsim_utils.test_connectivity(dev1, dev2)
+ # Check for mesh joined
+ check_mesh_group_added(dev[0])
+ check_mesh_group_added(dev[1])
- return test(dev, apdev, _test_connectivity)
+ # Check for peer connected
+ check_mesh_peer_connected(dev[0])
+ check_mesh_peer_connected(dev[1])
+ # Test connectivity 0->1 and 1->0
+ hwsim_utils.test_connectivity(dev[0], dev[1])
-def _test_wpas_mesh_open(dev, apdev, test_connectivity):
+def test_wpas_mesh_open_no_auto(dev, apdev):
"""wpa_supplicant open MESH network connectivity"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].set_network(id, "mesh_ht_mode", "HT40+")
+ check_mesh_support(dev[0])
+ id = add_open_mesh_network(dev[0], start=False)
+ dev[0].set_network(id, "dot11MeshMaxRetries", "16")
+ dev[0].set_network(id, "dot11MeshRetryTimeout", "255")
dev[0].mesh_group_add(id)
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[1].set_network(id, "key_mgmt", "NONE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].set_network(id, "mesh_ht_mode", "HT40+")
+ id = add_open_mesh_network(dev[1], start=False)
+ dev[1].set_network(id, "no_auto_peer", "1")
dev[1].mesh_group_add(id)
# Check for mesh joined
check_mesh_group_added(dev[1])
# Check for peer connected
- check_mesh_peer_connected(dev[0])
+ check_mesh_peer_connected(dev[0], timeout=30)
check_mesh_peer_connected(dev[1])
# Test connectivity 0->1 and 1->0
- test_connectivity(dev[0], dev[1])
- test_connectivity(dev[1], dev[0])
-
-
-def test_wpas_mesh_open(dev, apdev):
- return wrap_wpas_mesh_test(_test_wpas_mesh_open, dev, apdev)
+ hwsim_utils.test_connectivity(dev[0], dev[1])
+
+def add_mesh_secure_net(dev, psk=True):
+ id = dev.add_network()
+ dev.set_network(id, "mode", "5")
+ dev.set_network_quoted(id, "ssid", "wpas-mesh-sec")
+ dev.set_network(id, "key_mgmt", "SAE")
+ dev.set_network(id, "frequency", "2412")
+ if psk:
+ dev.set_network_quoted(id, "psk", "thisismypassphrase!")
+ return id
-
-def _test_wpas_mesh_open_no_auto(dev, apdev, test_connectivity):
- """wpa_supplicant open MESH network connectivity"""
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[0].set_network(id, "key_mgmt", "NONE")
- dev[0].set_network(id, "frequency", "2412")
+def test_wpas_mesh_secure(dev, apdev):
+ """wpa_supplicant secure MESH network connectivity"""
+ check_mesh_support(dev[0], secure=True)
+ dev[0].request("SET sae_groups ")
+ id = add_mesh_secure_net(dev[0])
dev[0].mesh_group_add(id)
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-open")
- dev[1].set_network(id, "key_mgmt", "NONE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].set_network(id, "no_auto_peer", "1")
+ dev[1].request("SET sae_groups ")
+ id = add_mesh_secure_net(dev[1])
dev[1].mesh_group_add(id)
# Check for mesh joined
check_mesh_peer_connected(dev[1])
# Test connectivity 0->1 and 1->0
- test_connectivity(dev[0], dev[1])
- test_connectivity(dev[1], dev[0])
+ hwsim_utils.test_connectivity(dev[0], dev[1])
+def test_wpas_mesh_secure_sae_group_mismatch(dev, apdev):
+ """wpa_supplicant secure MESH and SAE group mismatch"""
+ check_mesh_support(dev[0], secure=True)
+ addr0 = dev[0].p2p_interface_addr()
+ addr1 = dev[1].p2p_interface_addr()
+ addr2 = dev[2].p2p_interface_addr()
-def test_wpas_mesh_open_no_auto(dev, apdev):
- return wrap_wpas_mesh_test(_test_wpas_mesh_open_no_auto, dev, apdev)
+ dev[0].request("SET sae_groups 19 25")
+ id = add_mesh_secure_net(dev[0])
+ dev[0].mesh_group_add(id)
+ dev[1].request("SET sae_groups 19")
+ id = add_mesh_secure_net(dev[1])
+ dev[1].mesh_group_add(id)
+
+ dev[2].request("SET sae_groups 26")
+ id = add_mesh_secure_net(dev[2])
+ dev[2].mesh_group_add(id)
+
+ check_mesh_group_added(dev[0])
+ check_mesh_group_added(dev[1])
+ check_mesh_group_added(dev[2])
+
+ ev = dev[0].wait_event(["MESH-PEER-CONNECTED"])
+ if ev is None:
+ raise Exception("Remote peer did not connect")
+ if addr1 not in ev:
+ raise Exception("Unexpected peer connected: " + ev)
+
+ ev = dev[1].wait_event(["MESH-PEER-CONNECTED"])
+ if ev is None:
+ raise Exception("Remote peer did not connect")
+ if addr0 not in ev:
+ raise Exception("Unexpected peer connected: " + ev)
+
+ ev = dev[2].wait_event(["MESH-PEER-CONNECTED"], timeout=1)
+ if ev is not None:
+ raise Exception("Unexpected peer connection at dev[2]: " + ev)
+
+ ev = dev[0].wait_event(["MESH-PEER-CONNECTED"], timeout=0.1)
+ if ev is not None:
+ raise Exception("Unexpected peer connection: " + ev)
+
+ ev = dev[1].wait_event(["MESH-PEER-CONNECTED"], timeout=0.1)
+ if ev is not None:
+ raise Exception("Unexpected peer connection: " + ev)
-def _test_wpas_mesh_secure(dev, apdev, test_connectivity):
- """wpa_supplicant secure MESH network connectivity"""
dev[0].request("SET sae_groups ")
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-sec")
- dev[0].set_network(id, "key_mgmt", "SAE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].set_network_quoted(id, "psk", "thisismypassphrase!")
+ dev[1].request("SET sae_groups ")
+ dev[2].request("SET sae_groups ")
+
+def test_wpas_mesh_secure_sae_missing_password(dev, apdev):
+ """wpa_supplicant secure MESH and missing SAE password"""
+ check_mesh_support(dev[0], secure=True)
+ id = add_mesh_secure_net(dev[0], psk=False)
+ dev[0].set_network(id, "psk", "8f20b381f9b84371d61b5080ad85cac3c61ab3ca9525be5b2d0f4da3d979187a")
dev[0].mesh_group_add(id)
+ ev = dev[0].wait_event(["MESH-GROUP-STARTED", "Could not join mesh"],
+ timeout=5)
+ if ev is None:
+ raise Exception("Timeout on mesh start event")
+ if "MESH-GROUP-STARTED" in ev:
+ raise Exception("Unexpected mesh group start")
+ ev = dev[0].wait_event(["MESH-GROUP-STARTED"], timeout=0.1)
+ if ev is not None:
+ raise Exception("Unexpected mesh group start")
- dev[1].request("SET sae_groups ")
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-sec")
- dev[1].set_network(id, "key_mgmt", "SAE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].set_network_quoted(id, "psk", "thisismypassphrase!")
+def test_wpas_mesh_secure_no_auto(dev, apdev):
+ """wpa_supplicant secure MESH network connectivity"""
+ check_mesh_support(dev[0], secure=True)
+ dev[0].request("SET sae_groups 19")
+ id = add_mesh_secure_net(dev[0])
+ dev[0].mesh_group_add(id)
+
+ dev[1].request("SET sae_groups 19")
+ id = add_mesh_secure_net(dev[1])
+ dev[1].set_network(id, "no_auto_peer", "1")
dev[1].mesh_group_add(id)
# Check for mesh joined
check_mesh_group_added(dev[1])
# Check for peer connected
- check_mesh_peer_connected(dev[0])
+ check_mesh_peer_connected(dev[0], timeout=30)
check_mesh_peer_connected(dev[1])
# Test connectivity 0->1 and 1->0
- test_connectivity(dev[0], dev[1])
- test_connectivity(dev[1], dev[0])
+ hwsim_utils.test_connectivity(dev[0], dev[1])
+ dev[0].request("SET sae_groups ")
+ dev[1].request("SET sae_groups ")
-def test_wpas_mesh_secure(dev, apdev):
- return wrap_wpas_mesh_test(_test_wpas_mesh_secure, dev, apdev)
+def test_wpas_mesh_ctrl(dev):
+ """wpa_supplicant ctrl_iface mesh command error cases"""
+ check_mesh_support(dev[0])
+ if "FAIL" not in dev[0].request("MESH_GROUP_ADD 123"):
+ raise Exception("Unexpected MESH_GROUP_ADD success")
+ id = dev[0].add_network()
+ if "FAIL" not in dev[0].request("MESH_GROUP_ADD %d" % id):
+ raise Exception("Unexpected MESH_GROUP_ADD success")
+ dev[0].set_network(id, "mode", "5")
+ dev[0].set_network(id, "key_mgmt", "WPA-PSK")
+ if "FAIL" not in dev[0].request("MESH_GROUP_ADD %d" % id):
+ raise Exception("Unexpected MESH_GROUP_ADD success")
+
+ if "FAIL" not in dev[0].request("MESH_GROUP_REMOVE foo"):
+ raise Exception("Unexpected MESH_GROUP_REMOVE success")
+
+def test_wpas_mesh_dynamic_interface(dev):
+ """wpa_supplicant mesh with dynamic interface"""
+ check_mesh_support(dev[0])
+ mesh0 = None
+ mesh1 = None
+ try:
+ mesh0 = dev[0].request("MESH_INTERFACE_ADD ifname=mesh0")
+ if "FAIL" in mesh0:
+ raise Exception("MESH_INTERFACE_ADD failed")
+ mesh1 = dev[1].request("MESH_INTERFACE_ADD")
+ if "FAIL" in mesh1:
+ raise Exception("MESH_INTERFACE_ADD failed")
+
+ wpas0 = WpaSupplicant(ifname=mesh0)
+ wpas1 = WpaSupplicant(ifname=mesh1)
+ logger.info(mesh0 + " address " + wpas0.get_status_field("address"))
+ logger.info(mesh1 + " address " + wpas1.get_status_field("address"))
+
+ add_open_mesh_network(wpas0)
+ add_open_mesh_network(wpas1)
+ check_mesh_group_added(wpas0)
+ check_mesh_group_added(wpas1)
+ check_mesh_peer_connected(wpas0)
+ check_mesh_peer_connected(wpas1)
+ hwsim_utils.test_connectivity(wpas0, wpas1)
+
+ # Must not allow MESH_GROUP_REMOVE on dynamic interface
+ if "FAIL" not in wpas0.request("MESH_GROUP_REMOVE " + mesh0):
+ raise Exception("Invalid MESH_GROUP_REMOVE accepted")
+ if "FAIL" not in wpas1.request("MESH_GROUP_REMOVE " + mesh1):
+ raise Exception("Invalid MESH_GROUP_REMOVE accepted")
+
+ # Must not allow MESH_GROUP_REMOVE on another radio interface
+ if "FAIL" not in wpas0.request("MESH_GROUP_REMOVE " + mesh1):
+ raise Exception("Invalid MESH_GROUP_REMOVE accepted")
+ if "FAIL" not in wpas1.request("MESH_GROUP_REMOVE " + mesh0):
+ raise Exception("Invalid MESH_GROUP_REMOVE accepted")
+
+ wpas0.remove_ifname()
+ wpas1.remove_ifname()
+
+ if "OK" not in dev[0].request("MESH_GROUP_REMOVE " + mesh0):
+ raise Exception("MESH_GROUP_REMOVE failed")
+ if "OK" not in dev[1].request("MESH_GROUP_REMOVE " + mesh1):
+ raise Exception("MESH_GROUP_REMOVE failed")
+
+ if "FAIL" not in dev[0].request("MESH_GROUP_REMOVE " + mesh0):
+ raise Exception("Invalid MESH_GROUP_REMOVE accepted")
+ if "FAIL" not in dev[1].request("MESH_GROUP_REMOVE " + mesh1):
+ raise Exception("Invalid MESH_GROUP_REMOVE accepted")
+
+ logger.info("Make sure another dynamic group can be added")
+ mesh0 = dev[0].request("MESH_INTERFACE_ADD ifname=mesh0")
+ if "FAIL" in mesh0:
+ raise Exception("MESH_INTERFACE_ADD failed")
+ mesh1 = dev[1].request("MESH_INTERFACE_ADD")
+ if "FAIL" in mesh1:
+ raise Exception("MESH_INTERFACE_ADD failed")
+
+ wpas0 = WpaSupplicant(ifname=mesh0)
+ wpas1 = WpaSupplicant(ifname=mesh1)
+ logger.info(mesh0 + " address " + wpas0.get_status_field("address"))
+ logger.info(mesh1 + " address " + wpas1.get_status_field("address"))
+
+ add_open_mesh_network(wpas0)
+ add_open_mesh_network(wpas1)
+ check_mesh_group_added(wpas0)
+ check_mesh_group_added(wpas1)
+ check_mesh_peer_connected(wpas0)
+ check_mesh_peer_connected(wpas1)
+ hwsim_utils.test_connectivity(wpas0, wpas1)
+ finally:
+ if mesh0:
+ dev[0].request("MESH_GROUP_REMOVE " + mesh0)
+ if mesh1:
+ dev[1].request("MESH_GROUP_REMOVE " + mesh1)
+
+def test_wpas_mesh_max_peering(dev, apdev):
+ """Mesh max peering limit"""
+ check_mesh_support(dev[0])
+ try:
+ dev[0].request("SET max_peer_links 1")
+
+ # first, connect dev[0] and dev[1]
+ add_open_mesh_network(dev[0])
+ add_open_mesh_network(dev[1])
+ for i in range(2):
+ ev = dev[i].wait_event(["MESH-PEER-CONNECTED"])
+ if ev is None:
+ raise Exception("dev%d did not connect with any peer" % i)
+
+ # add dev[2] which will try to connect with both dev[0] and dev[1],
+ # but can complete connection only with dev[1]
+ add_open_mesh_network(dev[2])
+ for i in range(1, 3):
+ ev = dev[i].wait_event(["MESH-PEER-CONNECTED"])
+ if ev is None:
+ raise Exception("dev%d did not connect the second peer" % i)
+
+ ev = dev[0].wait_event(["MESH-PEER-CONNECTED"], timeout=1)
+ if ev is not None:
+ raise Exception("dev0 connection beyond max peering limit")
+
+ ev = dev[2].wait_event(["MESH-PEER-CONNECTED"], timeout=0.1)
+ if ev is not None:
+ raise Exception("dev2 reported unexpected peering: " + ev)
+
+ for i in range(3):
+ dev[i].mesh_group_remove()
+ check_mesh_group_removed(dev[i])
+ finally:
+ dev[0].request("SET max_peer_links 99")
+
+def test_wpas_mesh_open_5ghz(dev, apdev):
+ """wpa_supplicant open MESH network on 5 GHz band"""
+ try:
+ _test_wpas_mesh_open_5ghz(dev, apdev)
+ finally:
+ subprocess.call(['iw', 'reg', 'set', '00'])
+ dev[0].flush_scan_cache()
+ dev[1].flush_scan_cache()
+
+def _test_wpas_mesh_open_5ghz(dev, apdev):
+ check_mesh_support(dev[0])
+ subprocess.call(['iw', 'reg', 'set', 'US'])
+ for i in range(2):
+ for j in range(5):
+ ev = dev[i].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=5)
+ if ev is None:
+ raise Exception("No regdom change event")
+ if "alpha2=US" in ev:
+ break
+ add_open_mesh_network(dev[i], freq="5180")
+ # Check for mesh joined
+ check_mesh_group_added(dev[0])
+ check_mesh_group_added(dev[1])
-def _test_wpas_mesh_secure_no_auto(dev, apdev, test_connectivity):
- """wpa_supplicant secure MESH network connectivity"""
+ # Check for peer connected
+ check_mesh_peer_connected(dev[0])
+ check_mesh_peer_connected(dev[1])
+
+ # Test connectivity 0->1 and 1->0
+ hwsim_utils.test_connectivity(dev[0], dev[1])
+
+def test_wpas_mesh_password_mismatch(dev, apdev):
+ """Mesh network and one device with mismatching password"""
+ check_mesh_support(dev[0], secure=True)
dev[0].request("SET sae_groups ")
- id = dev[0].add_network()
- dev[0].set_network(id, "mode", "5")
- dev[0].set_network_quoted(id, "ssid", "wpas-mesh-sec")
- dev[0].set_network(id, "key_mgmt", "SAE")
- dev[0].set_network(id, "frequency", "2412")
- dev[0].set_network_quoted(id, "psk", "thisismypassphrase!")
+ id = add_mesh_secure_net(dev[0])
dev[0].mesh_group_add(id)
dev[1].request("SET sae_groups ")
- id = dev[1].add_network()
- dev[1].set_network(id, "mode", "5")
- dev[1].set_network_quoted(id, "ssid", "wpas-mesh-sec")
- dev[1].set_network(id, "key_mgmt", "SAE")
- dev[1].set_network(id, "frequency", "2412")
- dev[1].set_network_quoted(id, "psk", "thisismypassphrase!")
- dev[1].set_network(id, "no_auto_peer", "1")
+ id = add_mesh_secure_net(dev[1])
dev[1].mesh_group_add(id)
- # Check for mesh joined
+ dev[2].request("SET sae_groups ")
+ id = add_mesh_secure_net(dev[2])
+ dev[2].set_network_quoted(id, "psk", "wrong password")
+ dev[2].mesh_group_add(id)
+
+ # The two peers with matching password need to be able to connect
check_mesh_group_added(dev[0])
check_mesh_group_added(dev[1])
-
- # Check for peer connected
check_mesh_peer_connected(dev[0])
check_mesh_peer_connected(dev[1])
- # Test connectivity 0->1 and 1->0
- test_connectivity(dev[0], dev[1])
- test_connectivity(dev[1], dev[0])
+ ev = dev[2].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=20)
+ if ev is None:
+ raise Exception("dev2 did not report auth failure (1)")
+ ev = dev[2].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=20)
+ if ev is None:
+ raise Exception("dev2 did not report auth failure (2)")
+ count = 0
+ ev = dev[0].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=1)
+ if ev is None:
+ logger.info("dev0 did not report auth failure")
+ else:
+ if "addr=" + dev[2].own_addr() not in ev:
+ raise Exception("Unexpected peer address in dev0 event: " + ev)
+ count += 1
-def test_wpas_mesh_secure_no_auto(dev, apdev):
- return wrap_wpas_mesh_test(_test_wpas_mesh_secure_no_auto, dev, apdev)
+ ev = dev[1].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=1)
+ if ev is None:
+ logger.info("dev1 did not report auth failure")
+ else:
+ if "addr=" + dev[2].own_addr() not in ev:
+ raise Exception("Unexpected peer address in dev1 event: " + ev)
+ count += 1
+
+ hwsim_utils.test_connectivity(dev[0], dev[1])
+
+ for i in range(2):
+ try:
+ hwsim_utils.test_connectivity(dev[i], dev[2], timeout=1)
+ raise Exception("Data connectivity test passed unexpectedly")
+ except Exception, e:
+ if "data delivery failed" not in str(e):
+ raise
+
+ if count == 0:
+ raise Exception("Neither dev0 nor dev1 reported auth failure")
+
+def test_wpas_mesh_password_mismatch_retry(dev, apdev, params):
+ """Mesh password mismatch and retry [long]"""
+ if not params['long']:
+ raise HwsimSkip("Skip test case with long duration due to --long not specified")
+ check_mesh_support(dev[0], secure=True)
+ dev[0].request("SET sae_groups ")
+ id = add_mesh_secure_net(dev[0])
+ dev[0].mesh_group_add(id)
+
+ dev[1].request("SET sae_groups ")
+ id = add_mesh_secure_net(dev[1])
+ dev[1].set_network_quoted(id, "psk", "wrong password")
+ dev[1].mesh_group_add(id)
+
+ # Check for mesh joined
+ check_mesh_group_added(dev[0])
+ check_mesh_group_added(dev[1])
+
+ for i in range(4):
+ ev = dev[0].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=20)
+ if ev is None:
+ raise Exception("dev0 did not report auth failure (%d)" % i)
+ ev = dev[1].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=20)
+ if ev is None:
+ raise Exception("dev1 did not report auth failure (%d)" % i)
+
+ ev = dev[0].wait_event(["MESH-SAE-AUTH-BLOCKED"], timeout=10)
+ if ev is None:
+ raise Exception("dev0 did not report auth blocked")
+ ev = dev[1].wait_event(["MESH-SAE-AUTH-BLOCKED"], timeout=10)
+ if ev is None:
+ raise Exception("dev1 did not report auth blocked")
+
+def test_mesh_wpa_auth_init_oom(dev, apdev):
+ """Secure mesh network setup failing due to wpa_init() OOM"""
+ check_mesh_support(dev[0], secure=True)
+ dev[0].request("SET sae_groups ")
+ with alloc_fail(dev[0], 1, "wpa_init"):
+ id = add_mesh_secure_net(dev[0])
+ dev[0].mesh_group_add(id)
+ ev = dev[0].wait_event(["MESH-GROUP-STARTED"], timeout=0.2)
+ if ev is not None:
+ raise Exception("Unexpected mesh group start during OOM")
projects / mech_eap.git / blobdiff