/*
* WPA Supplicant / Configuration file structures
- * Copyright (c) 2003-2005, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Alternatively, this software may be distributed under the terms of BSD
- * license.
- *
- * See README and COPYING for more details.
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
*/
#ifndef CONFIG_H
#include "wps/wps.h"
+struct wpa_cred {
+ /**
+ * next - Next credential in the list
+ *
+ * This pointer can be used to iterate over all credentials. The head
+ * of this list is stored in the cred field of struct wpa_config.
+ */
+ struct wpa_cred *next;
+
+ /**
+ * id - Unique id for the credential
+ *
+ * This identifier is used as a unique identifier for each credential
+ * block when using the control interface. Each credential is allocated
+ * an id when it is being created, either when reading the
+ * configuration file or when a new credential is added through the
+ * control interface.
+ */
+ int id;
+
+ /**
+ * priority - Priority group
+ *
+ * By default, all networks and credentials get the same priority group
+ * (0). This field can be used to give higher priority for credentials
+ * (and similarly in struct wpa_ssid for network blocks) to change the
+ * Interworking automatic networking selection behavior. The matching
+ * network (based on either an enabled network block or a credential)
+ * with the highest priority value will be selected.
+ */
+ int priority;
+
+ /**
+ * pcsc - Use PC/SC and SIM/USIM card
+ */
+ int pcsc;
+
+ /**
+ * realm - Home Realm for Interworking
+ */
+ char *realm;
+
+ /**
+ * username - Username for Interworking network selection
+ */
+ char *username;
+
+ /**
+ * password - Password for Interworking network selection
+ */
+ char *password;
+
+ /**
+ * ext_password - Whether password is a name for external storage
+ */
+ int ext_password;
+
+ /**
+ * ca_cert - CA certificate for Interworking network selection
+ */
+ char *ca_cert;
+
+ /**
+ * client_cert - File path to client certificate file (PEM/DER)
+ *
+ * This field is used with Interworking networking selection for a case
+ * where client certificate/private key is used for authentication
+ * (EAP-TLS). Full path to the file should be used since working
+ * directory may change when wpa_supplicant is run in the background.
+ *
+ * Alternatively, a named configuration blob can be used by setting
+ * this to blob://blob_name.
+ */
+ char *client_cert;
+
+ /**
+ * private_key - File path to client private key file (PEM/DER/PFX)
+ *
+ * When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+ * commented out. Both the private key and certificate will be read
+ * from the PKCS#12 file in this case. Full path to the file should be
+ * used since working directory may change when wpa_supplicant is run
+ * in the background.
+ *
+ * Windows certificate store can be used by leaving client_cert out and
+ * configuring private_key in one of the following formats:
+ *
+ * cert://substring_to_match
+ *
+ * hash://certificate_thumbprint_in_hex
+ *
+ * For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+ *
+ * Note that when running wpa_supplicant as an application, the user
+ * certificate store (My user account) is used, whereas computer store
+ * (Computer account) is used when running wpasvc as a service.
+ *
+ * Alternatively, a named configuration blob can be used by setting
+ * this to blob://blob_name.
+ */
+ char *private_key;
+
+ /**
+ * private_key_passwd - Password for private key file
+ */
+ char *private_key_passwd;
+
+ /**
+ * imsi - IMSI in <MCC> | <MNC> | '-' | <MSIN> format
+ */
+ char *imsi;
+
+ /**
+ * milenage - Milenage parameters for SIM/USIM simulator in
+ * <Ki>:<OPc>:<SQN> format
+ */
+ char *milenage;
+
+ /**
+ * domain - Home service provider FQDN
+ *
+ * This is used to compare against the Domain Name List to figure out
+ * whether the AP is operated by the Home SP.
+ */
+ char *domain;
+
+ /**
+ * roaming_consortium - Roaming Consortium OI
+ *
+ * If roaming_consortium_len is non-zero, this field contains the
+ * Roaming Consortium OI that can be used to determine which access
+ * points support authentication with this credential. This is an
+ * alternative to the use of the realm parameter. When using Roaming
+ * Consortium to match the network, the EAP parameters need to be
+ * pre-configured with the credential since the NAI Realm information
+ * may not be available or fetched.
+ */
+ u8 roaming_consortium[15];
+
+ /**
+ * roaming_consortium_len - Length of roaming_consortium
+ */
+ size_t roaming_consortium_len;
+
+ /**
+ * eap_method - EAP method to use
+ *
+ * Pre-configured EAP method to use with this credential or %NULL to
+ * indicate no EAP method is selected, i.e., the method will be
+ * selected automatically based on ANQP information.
+ */
+ struct eap_method_type *eap_method;
+
+ /**
+ * phase1 - Phase 1 (outer authentication) parameters
+ *
+ * Pre-configured EAP parameters or %NULL.
+ */
+ char *phase1;
+
+ /**
+ * phase2 - Phase 2 (inner authentication) parameters
+ *
+ * Pre-configured EAP parameters or %NULL.
+ */
+ char *phase2;
+};
+
+
#define CFG_CHANGED_DEVICE_NAME BIT(0)
#define CFG_CHANGED_CONFIG_METHODS BIT(1)
#define CFG_CHANGED_DEVICE_TYPE BIT(2)
#define CFG_CHANGED_VENDOR_EXTENSION BIT(10)
#define CFG_CHANGED_P2P_LISTEN_CHANNEL BIT(11)
#define CFG_CHANGED_P2P_OPER_CHANNEL BIT(12)
+#define CFG_CHANGED_P2P_PREF_CHAN BIT(13)
+#define CFG_CHANGED_EXT_PW_BACKEND BIT(14)
/**
* struct wpa_config - wpa_supplicant configuration data
int num_prio;
/**
+ * cred - Head of the credential list
+ *
+ * This is the head for the list of all the configured credentials.
+ */
+ struct wpa_cred *cred;
+
+ /**
* eapol_version - IEEE 802.1X/EAPOL version number
*
* wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which
int ap_scan;
/**
+ * disable_scan_offload - Disable automatic offloading of scan requests
+ *
+ * By default, %wpa_supplicant tries to offload scanning if the driver
+ * indicates support for this (sched_scan). This configuration
+ * parameter can be used to disable this offloading mechanism.
+ */
+ int disable_scan_offload;
+
+ /**
* ctrl_interface - Parameters for the control interface
*
* If this is specified, %wpa_supplicant will open a control interface
char *pkcs11_module_path;
/**
+ * pcsc_reader - PC/SC reader name prefix
+ *
+ * If not %NULL, PC/SC reader with a name that matches this prefix is
+ * initialized for SIM/USIM access. Empty string can be used to match
+ * the first available reader.
+ */
+ char *pcsc_reader;
+
+ /**
+ * pcsc_pin - PIN for USIM, GSM SIM, and smartcards
+ *
+ * This field is used to configure PIN for SIM/USIM for EAP-SIM and
+ * EAP-AKA. If left out, this will be asked through control interface.
+ */
+ char *pcsc_pin;
+
+ /**
* driver_param - Driver interface parameters
*
* This text string is passed to the selected driver interface with the
char *p2p_ssid_postfix;
int persistent_reconnect;
int p2p_intra_bss;
+ unsigned int num_p2p_pref_chan;
+ struct p2p_channel *p2p_pref_chan;
+
+ struct wpabuf *wps_vendor_ext_m1;
#define MAX_WPS_VENDOR_EXT 10
/**
* stations in the group. As a P2P client, this means no GO seen in
* scan results. The maximum idle time is specified in seconds with 0
* indicating no time limit, i.e., the P2P group remains in active
- * state indefinitely until explicitly removed.
+ * state indefinitely until explicitly removed. As a P2P client, the
+ * maximum idle time of P2P_MAX_CLIENT_IDLE seconds is enforced, i.e.,
+ * this parameter is mainly meant for GO use and for P2P client, it can
+ * only be used to reduce the default timeout to smaller value. A
+ * special value -1 can be used to configure immediate removal of the
+ * group for P2P client role on any disconnection after the data
+ * connection has been established.
*/
- unsigned int p2p_group_idle;
+ int p2p_group_idle;
/**
* bss_max_count - Maximum number of BSS entries to keep in memory
int filter_ssids;
/**
+ * filter_rssi - RSSI-based scan result filtering
+ *
+ * 0 = do not filter scan results
+ * -n = filter scan results below -n dBm
+ */
+ int filter_rssi;
+
+ /**
* max_num_sta - Maximum number of STAs in an AP/P2P GO
*/
unsigned int max_num_sta;
u8 hessid[ETH_ALEN];
/**
- * home_realm - Home Realm for Interworking
+ * hs20 - Hotspot 2.0
*/
- char *home_realm;
+ int hs20;
/**
- * home_username - Username for Interworking network selection
+ * pbc_in_m1 - AP mode WPS probing workaround for PBC with Windows 7
+ *
+ * Windows 7 uses incorrect way of figuring out AP's WPS capabilities
+ * by acting as a Registrar and using M1 from the AP. The config
+ * methods attribute in that message is supposed to indicate only the
+ * configuration method supported by the AP in Enrollee role, i.e., to
+ * add an external Registrar. For that case, PBC shall not be used and
+ * as such, the PushButton config method is removed from M1 by default.
+ * If pbc_in_m1=1 is included in the configuration file, the PushButton
+ * config method is left in M1 (if included in config_methods
+ * parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from
+ * a label in the AP).
*/
- char *home_username;
+ int pbc_in_m1;
/**
- * home_password - Password for Interworking network selection
+ * autoscan - Automatic scan parameters or %NULL if none
+ *
+ * This is an optional set of parameters for automatic scanning
+ * within an interface in following format:
+ * <autoscan module name>:<module parameters>
*/
- char *home_password;
+ char *autoscan;
/**
- * home_ca_cert - CA certificate for Interworking network selection
+ * wps_nfc_dev_pw_id - NFC Device Password ID for password token
*/
- char *home_ca_cert;
+ int wps_nfc_dev_pw_id;
/**
- * home_imsi - IMSI in <MCC> | <MNC> | '-' | <MSIN> format
+ * wps_nfc_dh_pubkey - NFC DH Public Key for password token
*/
- char *home_imsi;
+ struct wpabuf *wps_nfc_dh_pubkey;
/**
- * home_milenage - Milenage parameters for SIM/USIM simulator in
- * <Ki>:<OPc>:<SQN> format
+ * wps_nfc_dh_pubkey - NFC DH Private Key for password token
+ */
+ struct wpabuf *wps_nfc_dh_privkey;
+
+ /**
+ * wps_nfc_dh_pubkey - NFC Device Password for password token
*/
- char *home_milenage;
+ struct wpabuf *wps_nfc_dev_pw;
+
+ /**
+ * ext_password_backend - External password backend or %NULL if none
+ *
+ * format: <backend name>[:<optional backend parameters>]
+ */
+ char *ext_password_backend;
};
void wpa_config_free_blob(struct wpa_config_blob *blob);
int wpa_config_remove_blob(struct wpa_config *config, const char *name);
+struct wpa_cred * wpa_config_get_cred(struct wpa_config *config, int id);
+struct wpa_cred * wpa_config_add_cred(struct wpa_config *config);
+int wpa_config_remove_cred(struct wpa_config *config, int id);
+void wpa_config_free_cred(struct wpa_cred *cred);
+int wpa_config_set_cred(struct wpa_cred *cred, const char *var,
+ const char *value, int line);
+
struct wpa_config * wpa_config_alloc_empty(const char *ctrl_interface,
const char *driver_param);
#ifndef CONFIG_NO_STDOUT_DEBUG
projects / mech_eap.git / blobdiff