* WPA Supplicant / Configuration file structures
* Copyright (c) 2003-2005, Jouni Malinen <j@w1.fi>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Alternatively, this software may be distributed under the terms of BSD
- * license.
- *
- * See README and COPYING for more details.
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
*/
#ifndef CONFIG_H
#define DEFAULT_P2P_GO_INTENT 7
#define DEFAULT_P2P_INTRA_BSS 1
#define DEFAULT_BSS_MAX_COUNT 200
+#define DEFAULT_BSS_EXPIRATION_AGE 180
+#define DEFAULT_BSS_EXPIRATION_SCAN_COUNT 2
+#define DEFAULT_MAX_NUM_STA 128
+#define DEFAULT_ACCESS_NETWORK_TYPE 15
#include "config_ssid.h"
+#include "wps/wps.h"
+
+
+struct wpa_cred {
+ /**
+ * next - Next credential in the list
+ *
+ * This pointer can be used to iterate over all credentials. The head
+ * of this list is stored in the cred field of struct wpa_config.
+ */
+ struct wpa_cred *next;
+
+ /**
+ * id - Unique id for the credential
+ *
+ * This identifier is used as a unique identifier for each credential
+ * block when using the control interface. Each credential is allocated
+ * an id when it is being created, either when reading the
+ * configuration file or when a new credential is added through the
+ * control interface.
+ */
+ int id;
+
+ /**
+ * realm - Home Realm for Interworking
+ */
+ char *realm;
+
+ /**
+ * username - Username for Interworking network selection
+ */
+ char *username;
+
+ /**
+ * password - Password for Interworking network selection
+ */
+ char *password;
+
+ /**
+ * ca_cert - CA certificate for Interworking network selection
+ */
+ char *ca_cert;
+
+ /**
+ * imsi - IMSI in <MCC> | <MNC> | '-' | <MSIN> format
+ */
+ char *imsi;
+
+ /**
+ * milenage - Milenage parameters for SIM/USIM simulator in
+ * <Ki>:<OPc>:<SQN> format
+ */
+ char *milenage;
+
+ /**
+ * domain - Home service provider FQDN
+ *
+ * This is used to compare against the Domain Name List to figure out
+ * whether the AP is operated by the Home SP.
+ */
+ char *domain;
+};
#define CFG_CHANGED_DEVICE_NAME BIT(0)
#define CFG_CHANGED_P2P_SSID_POSTFIX BIT(7)
#define CFG_CHANGED_WPS_STRING BIT(8)
#define CFG_CHANGED_P2P_INTRA_BSS BIT(9)
+#define CFG_CHANGED_VENDOR_EXTENSION BIT(10)
+#define CFG_CHANGED_P2P_LISTEN_CHANNEL BIT(11)
+#define CFG_CHANGED_P2P_OPER_CHANNEL BIT(12)
/**
* struct wpa_config - wpa_supplicant configuration data
int num_prio;
/**
+ * cred - Head of the credential list
+ *
+ * This is the head for the list of all the configured credentials.
+ */
+ struct wpa_cred *cred;
+
+ /**
* eapol_version - IEEE 802.1X/EAPOL version number
*
* wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which
* If this is specified, %wpa_supplicant will open a control interface
* that is available for external programs to manage %wpa_supplicant.
* The meaning of this string depends on which control interface
- * mechanism is used. For all cases, the existance of this parameter
+ * mechanism is used. For all cases, the existence of this parameter
* in configuration is used to determine whether the control interface
* is enabled.
*
/**
* device_type - Primary Device Type (WPS)
- * Used format: categ-OUI-subcateg
- * categ = Category as an integer value
- * OUI = OUI and type octet as a 4-octet hex-encoded value;
- * 0050F204 for default WPS OUI
- * subcateg = OUI-specific Sub Category as an integer value
- * Examples:
- * 1-0050F204-1 (Computer / PC)
- * 1-0050F204-2 (Computer / Server)
- * 5-0050F204-1 (Storage / NAS)
- * 6-0050F204-1 (Network Infrastructure / AP)
*/
- char *device_type;
+ u8 device_type[WPS_DEV_TYPE_LEN];
/**
* config_methods - Config Methods
#define MAX_SEC_DEVICE_TYPES 5
/**
- * sec_device_type - Secondary Device Types (P2P)
- * See device_type for the format used with these.
+ * sec_device_types - Secondary Device Types (P2P)
*/
- char *sec_device_type[MAX_SEC_DEVICE_TYPES];
+ u8 sec_device_type[MAX_SEC_DEVICE_TYPES][WPS_DEV_TYPE_LEN];
+ int num_sec_device_types;
int p2p_listen_reg_class;
int p2p_listen_channel;
int persistent_reconnect;
int p2p_intra_bss;
+#define MAX_WPS_VENDOR_EXT 10
+ /**
+ * wps_vendor_ext - Vendor extension attributes in WPS
+ */
+ struct wpabuf *wps_vendor_ext[MAX_WPS_VENDOR_EXT];
+
+ /**
+ * p2p_group_idle - Maximum idle time in seconds for P2P group
+ *
+ * This value controls how long a P2P group is maintained after there
+ * is no other members in the group. As a GO, this means no associated
+ * stations in the group. As a P2P client, this means no GO seen in
+ * scan results. The maximum idle time is specified in seconds with 0
+ * indicating no time limit, i.e., the P2P group remains in active
+ * state indefinitely until explicitly removed. As a P2P client, the
+ * maximum idle time of P2P_MAX_CLIENT_IDLE seconds is enforced, i.e.,
+ * this parameter is mainly meant for GO use and for P2P client, it can
+ * only be used to reduce the default timeout to smaller value.
+ */
+ unsigned int p2p_group_idle;
+
/**
* bss_max_count - Maximum number of BSS entries to keep in memory
*/
unsigned int bss_max_count;
/**
+ * bss_expiration_age - BSS entry age after which it can be expired
+ *
+ * This value controls the time in seconds after which a BSS entry
+ * gets removed if it has not been updated or is not in use.
+ */
+ unsigned int bss_expiration_age;
+
+ /**
+ * bss_expiration_scan_count - Expire BSS after number of scans
+ *
+ * If the BSS entry has not been seen in this many scans, it will be
+ * removed. A value of 1 means that entry is removed after the first
+ * scan in which the BSSID is not seen. Larger values can be used
+ * to avoid BSS entries disappearing if they are not visible in
+ * every scan (e.g., low signal quality or interference).
+ */
+ unsigned int bss_expiration_scan_count;
+
+ /**
* filter_ssids - SSID-based scan result filtering
*
* 0 = do not filter scan results
int filter_ssids;
/**
+ * max_num_sta - Maximum number of STAs in an AP/P2P GO
+ */
+ unsigned int max_num_sta;
+
+ /**
* changed_parameters - Bitmap of changed parameters since last update
*/
unsigned int changed_parameters;
+
+ /**
+ * disassoc_low_ack - Disassocicate stations with massive packet loss
+ */
+ int disassoc_low_ack;
+
+ /**
+ * interworking - Whether Interworking (IEEE 802.11u) is enabled
+ */
+ int interworking;
+
+ /**
+ * access_network_type - Access Network Type
+ *
+ * When Interworking is enabled, scans will be limited to APs that
+ * advertise the specified Access Network Type (0..15; with 15
+ * indicating wildcard match).
+ */
+ int access_network_type;
+
+ /**
+ * hessid - Homogenous ESS identifier
+ *
+ * If this is set (any octet is non-zero), scans will be used to
+ * request response only from BSSes belonging to the specified
+ * Homogeneous ESS. This is used only if interworking is enabled.
+ */
+ u8 hessid[ETH_ALEN];
};
void wpa_config_free(struct wpa_config *ssid);
void wpa_config_free_ssid(struct wpa_ssid *ssid);
+void wpa_config_foreach_network(struct wpa_config *config,
+ void (*func)(void *, struct wpa_ssid *),
+ void *arg);
struct wpa_ssid * wpa_config_get_network(struct wpa_config *config, int id);
struct wpa_ssid * wpa_config_add_network(struct wpa_config *config);
int wpa_config_remove_network(struct wpa_config *config, int id);
void wpa_config_set_network_defaults(struct wpa_ssid *ssid);
int wpa_config_set(struct wpa_ssid *ssid, const char *var, const char *value,
int line);
+int wpa_config_set_quoted(struct wpa_ssid *ssid, const char *var,
+ const char *value);
char ** wpa_config_get_all(struct wpa_ssid *ssid, int get_keys);
char * wpa_config_get(struct wpa_ssid *ssid, const char *var);
char * wpa_config_get_no_key(struct wpa_ssid *ssid, const char *var);
void wpa_config_free_blob(struct wpa_config_blob *blob);
int wpa_config_remove_blob(struct wpa_config *config, const char *name);
+struct wpa_cred * wpa_config_get_cred(struct wpa_config *config, int id);
+struct wpa_cred * wpa_config_add_cred(struct wpa_config *config);
+int wpa_config_remove_cred(struct wpa_config *config, int id);
+void wpa_config_free_cred(struct wpa_cred *cred);
+int wpa_config_set_cred(struct wpa_cred *cred, const char *var,
+ const char *value, int line);
+
struct wpa_config * wpa_config_alloc_empty(const char *ctrl_interface,
const char *driver_param);
#ifndef CONFIG_NO_STDOUT_DEBUG