#define DEFAULT_USER_MPM 1
#define DEFAULT_MAX_PEER_LINKS 99
#define DEFAULT_MESH_MAX_INACTIVITY 300
+/*
+ * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
+ * but use 1000 ms in practice to avoid issues on low power CPUs.
+ */
+#define DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD 1000
#define DEFAULT_FAST_REAUTH 1
#define DEFAULT_P2P_GO_INTENT 7
#define DEFAULT_P2P_INTRA_BSS 1
* one by one until the driver reports successful association; each
* network block should have explicit security policy (i.e., only one
* option in the lists) for key_mgmt, pairwise, group, proto variables.
+ *
+ * Note: ap_scan=2 should not be used with the nl80211 driver interface
+ * (the current Linux interface). ap_scan=1 is optimized work working
+ * with nl80211. For finding networks using hidden SSID, scan_ssid=1 in
+ * the network block can be used with nl80211.
*/
int ap_scan;
int p2p_group_idle;
/**
+ * p2p_go_freq_change_policy - The GO frequency change policy
+ *
+ * This controls the behavior of the GO when there is a change in the
+ * map of the currently used frequencies in case more than one channel
+ * is supported.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM: Prefer working in a single channel mode if
+ * possible. In case the GO is the only interface using its frequency
+ * and there are other station interfaces on other frequencies, the GO
+ * will migrate to one of these frequencies.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS: Same as P2P_GO_FREQ_MOVE_SCM,
+ * but a transition is possible only in case one of the other used
+ * frequencies is one of the frequencies in the intersection of the
+ * frequency list of the local device and the peer device.
+ *
+ * @P2P_GO_FREQ_MOVE_STAY: Prefer to stay on the current frequency.
+ */
+ enum {
+ P2P_GO_FREQ_MOVE_SCM = 0,
+ P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS = 1,
+ P2P_GO_FREQ_MOVE_STAY = 2,
+ P2P_GO_FREQ_MOVE_MAX = P2P_GO_FREQ_MOVE_STAY,
+ } p2p_go_freq_change_policy;
+
+#define DEFAULT_P2P_GO_FREQ_MOVE P2P_GO_FREQ_MOVE_STAY
+
+ /**
* p2p_passphrase_len - Passphrase length (8..63) for P2P GO
*
* This parameter controls the length of the random passphrase that is
int mesh_max_inactivity;
/**
+ * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
+ *
+ * This timeout value is used in mesh STA to retransmit
+ * SAE Authentication frame.
+ * By default: 1000 milliseconds.
+ */
+ int dot11RSNASAERetransPeriod;
+
+ /**
* passive_scan - Whether to force passive scan for network connection
*
* This parameter can be used to force only passive scanning to be used
* by executing the WPS protocol.
*/
int wps_priority;
+
+ /**
+ * fst_group_id - FST group ID
+ */
+ char *fst_group_id;
+
+ /**
+ * fst_priority - priority of the interface within the FST group
+ */
+ int fst_priority;
+
+ /**
+ * fst_llt - default FST LLT (Link-Lost Timeout) to be used for the
+ * interface.
+ */
+ int fst_llt;
};