#define DEFAULT_BSS_EXPIRATION_SCAN_COUNT 2
#define DEFAULT_MAX_NUM_STA 128
#define DEFAULT_ACCESS_NETWORK_TYPE 15
+#define DEFAULT_SCAN_CUR_FREQ 0
#include "config_ssid.h"
#include "wps/wps.h"
int id;
/**
+ * temporary - Whether this credential is temporary and not to be saved
+ */
+ int temporary;
+
+ /**
* priority - Priority group
*
* By default, all networks and credentials get the same priority group
char *milenage;
/**
- * domain - Home service provider FQDN
+ * domain_suffix_match - Constraint for server domain name
+ *
+ * If set, this FQDN is used as a suffix match requirement for the AAA
+ * server certificate in SubjectAltName dNSName element(s). If a
+ * matching dNSName is found, this constraint is met. If no dNSName
+ * values are present, this constraint is matched against SubjetName CN
+ * using same suffix match comparison. Suffix match here means that the
+ * host/domain name is compared one label at a time starting from the
+ * top-level domain and all the labels in @domain_suffix_match shall be
+ * included in the certificate. The certificate may include additional
+ * sub-level labels in addition to the required labels.
+ *
+ * For example, domain_suffix_match=example.com would match
+ * test.example.com but would not match test-example.com.
+ */
+ char *domain_suffix_match;
+
+ /**
+ * domain - Home service provider FQDN(s)
*
* This is used to compare against the Domain Name List to figure out
- * whether the AP is operated by the Home SP.
+ * whether the AP is operated by the Home SP. Multiple domain entries
+ * can be used to configure alternative FQDNs that will be considered
+ * home networks.
+ */
+ char **domain;
+
+ /**
+ * num_domain - Number of FQDNs in the domain array
*/
- char *domain;
+ size_t num_domain;
/**
* roaming_consortium - Roaming Consortium OI
*/
size_t roaming_consortium_len;
+ u8 required_roaming_consortium[15];
+ size_t required_roaming_consortium_len;
+
/**
* eap_method - EAP method to use
*
size_t ssid_len;
} *excluded_ssid;
size_t num_excluded_ssid;
+
+ struct roaming_partner {
+ char fqdn[128];
+ int exact_match;
+ u8 priority;
+ char country[3];
+ } *roaming_partner;
+ size_t num_roaming_partner;
+
+ int update_identifier;
+
+ /**
+ * provisioning_sp - FQDN of the SP that provisioned the credential
+ */
+ char *provisioning_sp;
+
+ /**
+ * sp_priority - Credential priority within a provisioning SP
+ *
+ * This is the priority of the credential among all credentials
+ * provisionined by the same SP (i.e., for entries that have identical
+ * provisioning_sp value). The range of this priority is 0-255 with 0
+ * being the highest and 255 the lower priority.
+ */
+ int sp_priority;
+
+ unsigned int min_dl_bandwidth_home;
+ unsigned int min_ul_bandwidth_home;
+ unsigned int min_dl_bandwidth_roaming;
+ unsigned int min_ul_bandwidth_roaming;
+
+ /**
+ * max_bss_load - Maximum BSS Load Channel Utilization (1..255)
+ * This value is used as the maximum channel utilization for network
+ * selection purposes for home networks. If the AP does not advertise
+ * BSS Load or if the limit would prevent any connection, this
+ * constraint will be ignored.
+ */
+ unsigned int max_bss_load;
+
+ unsigned int num_req_conn_capab;
+ u8 *req_conn_capab_proto;
+ int **req_conn_capab_port;
+
+ /**
+ * ocsp - Whether to use/require OCSP to check server certificate
+ *
+ * 0 = do not use OCSP stapling (TLS certificate status extension)
+ * 1 = try to use OCSP stapling, but not require response
+ * 2 = require valid OCSP stapling response
+ */
+ int ocsp;
};
int ap_scan;
/**
+ * bgscan - Background scan and roaming parameters or %NULL if none
+ *
+ * This is an optional set of parameters for background scanning and
+ * roaming within a network (ESS). For more detailed information see
+ * ssid block documentation.
+ *
+ * The variable defines default bgscan behavior for all BSS station
+ * networks except for those which have their own bgscan configuration.
+ */
+ char *bgscan;
+
+ /**
* disable_scan_offload - Disable automatic offloading of scan requests
*
* By default, %wpa_supplicant tries to offload scanning if the driver
char *pcsc_pin;
/**
+ * external_sim - Use external processing for SIM/USIM operations
+ */
+ int external_sim;
+
+ /**
* driver_param - Driver interface parameters
*
* This text string is passed to the selected driver interface with the
int p2p_intra_bss;
unsigned int num_p2p_pref_chan;
struct p2p_channel *p2p_pref_chan;
+ struct wpa_freq_range_list p2p_no_go_freq;
+ int p2p_add_cli_chan;
+ int p2p_ignore_shared_freq;
struct wpabuf *wps_vendor_ext_m1;
unsigned int max_num_sta;
/**
+ * freq_list - Array of allowed scan frequencies or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to allow for narrowing scanning range.
+ */
+ int *freq_list;
+
+ /**
+ * scan_cur_freq - Whether to scan only the current channel
+ *
+ * If true, attempt to scan only the current channel if any other
+ * VIFs on this radio are already associated on a particular channel.
+ */
+ int scan_cur_freq;
+
+ /**
* changed_parameters - Bitmap of changed parameters since last update
*/
unsigned int changed_parameters;
int p2p_go_ht40;
/**
+ * p2p_go_vht - Default mode for VHT enable when operating as GO
+ *
+ * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
+ * Note that regulatory constraints and driver capabilities are
+ * consulted anyway, so setting it to 1 can't do real harm.
+ * By default: 0 (disabled)
+ */
+ int p2p_go_vht;
+
+ /**
* p2p_disabled - Whether P2P operations are disabled for this interface
*/
int p2p_disabled;
* groups will be tried in the indicated order.
*/
int *sae_groups;
+
+ /**
+ * dtim_period - Default DTIM period in Beacon intervals
+ *
+ * This parameter can be used to set the default value for network
+ * blocks that do not specify dtim_period.
+ */
+ int dtim_period;
+
+ /**
+ * beacon_int - Default Beacon interval in TU
+ *
+ * This parameter can be used to set the default value for network
+ * blocks that do not specify beacon_int.
+ */
+ int beacon_int;
+
+ /**
+ * ap_vendor_elements: Vendor specific elements for Beacon/ProbeResp
+ *
+ * This parameter can be used to define additional vendor specific
+ * elements for Beacon and Probe Response frames in AP/P2P GO mode. The
+ * format for these element(s) is a hexdump of the raw information
+ * elements (id+len+payload for one or more elements).
+ */
+ struct wpabuf *ap_vendor_elements;
+
+ /**
+ * ignore_old_scan_res - Ignore scan results older than request
+ *
+ * The driver may have a cache of scan results that makes it return
+ * information that is older than our scan trigger. This parameter can
+ * be used to configure such old information to be ignored instead of
+ * allowing it to update the internal BSS table.
+ */
+ int ignore_old_scan_res;
+
+ /**
+ * sched_scan_interval - schedule scan interval
+ */
+ unsigned int sched_scan_interval;
+
+ /**
+ * tdls_external_control - External control for TDLS setup requests
+ *
+ * Enable TDLS mode where external programs are given the control
+ * to specify the TDLS link to get established to the driver. The
+ * driver requests the TDLS setup to the supplicant only for the
+ * specified TDLS peers.
+ */
+ int tdls_external_control;
+
+ u8 ip_addr_go[4];
+ u8 ip_addr_mask[4];
+ u8 ip_addr_start[4];
+ u8 ip_addr_end[4];
+
+ /**
+ * osu_dir - OSU provider information directory
+ *
+ * If set, allow FETCH_OSU control interface command to be used to fetch
+ * OSU provider information into all APs and store the results in this
+ * directory.
+ */
+ char *osu_dir;
};
struct wpa_config_blob *blob);
void wpa_config_free_blob(struct wpa_config_blob *blob);
int wpa_config_remove_blob(struct wpa_config *config, const char *name);
+void wpa_config_flush_blobs(struct wpa_config *config);
struct wpa_cred * wpa_config_get_cred(struct wpa_config *config, int id);
struct wpa_cred * wpa_config_add_cred(struct wpa_config *config);
void wpa_config_free_cred(struct wpa_cred *cred);
int wpa_config_set_cred(struct wpa_cred *cred, const char *var,
const char *value, int line);
+char * wpa_config_get_cred_no_key(struct wpa_cred *cred, const char *var);
struct wpa_config * wpa_config_alloc_empty(const char *ctrl_interface,
const char *driver_param);
* wpa_config_read - Read and parse configuration database
* @name: Name of the configuration (e.g., path and file name for the
* configuration file)
+ * @cfgp: Pointer to previously allocated configuration data or %NULL if none
* Returns: Pointer to allocated configuration data or %NULL on failure
*
* This function reads configuration data, parses its contents, and allocates
*
* Each configuration backend needs to implement this function.
*/
-struct wpa_config * wpa_config_read(const char *name);
+struct wpa_config * wpa_config_read(const char *name, struct wpa_config *cfgp);
/**
* wpa_config_write - Write or update configuration data
projects / mech_eap.git / blobdiff