#ifndef CONFIG_SSID_H
#define CONFIG_SSID_H
-#include "defs.h"
+#include "common/defs.h"
#include "eap_peer/eap_config.h"
#define MAX_SSID_LEN 32
*
* If set, this network block is used only when associating with the AP
* using the configured BSSID
+ *
+ * If this is a persistent P2P group (disabled == 2), this is the GO
+ * Device Address.
*/
u8 bssid[ETH_ALEN];
*
* 2 = AP (access point)
*
+ * 3 = P2P Group Owner (can be set in the configuration file)
+ *
+ * 4 = P2P Group Formation (used internally; not in configuration
+ * files)
+ *
* Note: IBSS can only be used with key_mgmt NONE (plaintext and
* static WEP) and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In
* addition, ap_scan has to be set to 2 for IBSS. WPA-None requires
* pairwise=NONE, group=TKIP (or CCMP, but not both), and psk must also
* be set (either directly or using ASCII passphrase).
*/
- int mode;
+ enum wpas_mode {
+ WPAS_MODE_INFRA = 0,
+ WPAS_MODE_IBSS = 1,
+ WPAS_MODE_AP = 2,
+ WPAS_MODE_P2P_GO = 3,
+ WPAS_MODE_P2P_GROUP_FORMATION = 4,
+ } mode;
/**
* disabled - Whether this network is currently disabled
* 0 = this network can be used (default).
* 1 = this network block is disabled (can be enabled through
* ctrl_iface, e.g., with wpa_cli or wpa_gui).
+ * 2 = this network block includes parameters for a persistent P2P
+ * group (can be used with P2P ctrl_iface commands)
*/
int disabled;
* attacks against TKIP deficiencies.
*/
int wpa_ptk_rekey;
+
+ /**
+ * scan_freq - Array of frequencies to scan or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to include in scan requests when searching for this
+ * network. This can be used to speed up scanning when the network is
+ * known to not use all possible channels.
+ */
+ int *scan_freq;
+
+ /**
+ * bgscan - Background scan and roaming parameters or %NULL if none
+ *
+ * This is an optional set of parameters for background scanning and
+ * roaming within a network (ESS) in following format:
+ * <bgscan module name>:<module parameters>
+ */
+ char *bgscan;
+
+ /**
+ * freq_list - Array of allowed frequencies or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to allow for selecting the BSS. If set, scan results
+ * that do not match any of the specified frequencies are not
+ * considered when selecting a BSS.
+ */
+ int *freq_list;
+
+ /**
+ * p2p_group - Network generated as a P2P group (used internally)
+ */
+ int p2p_group;
+
+ /**
+ * p2p_persistent_group - Whether this is a persistent group
+ */
+ int p2p_persistent_group;
+
+ /**
+ * temporary - Whether this network is temporary and not to be saved
+ */
+ int temporary;
};
#endif /* CONFIG_SSID_H */