#include "wpagui.h"
enum {
- AUTH_NONE = 0,
- AUTH_IEEE8021X = 1,
- AUTH_WPA_PSK = 2,
- AUTH_WPA_EAP = 3,
- AUTH_WPA2_PSK = 4,
- AUTH_WPA2_EAP = 5
+ AUTH_NONE_OPEN,
+ AUTH_NONE_WEP,
+ AUTH_NONE_WEP_SHARED,
+ AUTH_IEEE8021X,
+ AUTH_WPA_PSK,
+ AUTH_WPA_EAP,
+ AUTH_WPA2_PSK,
+ AUTH_WPA2_EAP
};
#define WPA_GUI_KEY_DATA "[key is configured]"
{
setupUi(this);
+ encrSelect->setEnabled(false);
connect(authSelect, SIGNAL(activated(int)), this,
SLOT(authChanged(int)));
connect(cancelButton, SIGNAL(clicked()), this, SLOT(close()));
connect(removeButton, SIGNAL(clicked()), this, SLOT(removeNetwork()));
connect(eapSelect, SIGNAL(activated(int)), this,
SLOT(eapChanged(int)));
+ connect(useWpsButton, SIGNAL(clicked()), this, SLOT(useWps()));
wpagui = NULL;
new_network = false;
else if (flags.indexOf("[WPA-PSK") >= 0)
auth = AUTH_WPA_PSK;
else
- auth = AUTH_NONE;
+ auth = AUTH_NONE_OPEN;
if (flags.indexOf("-CCMP") >= 0)
encr = 1;
else if (flags.indexOf("-TKIP") >= 0)
encr = 0;
- else if (flags.indexOf("WEP") >= 0)
+ else if (flags.indexOf("WEP") >= 0) {
encr = 1;
- else
+ if (auth == AUTH_NONE_OPEN)
+ auth = AUTH_NONE_WEP;
+ } else
encr = 0;
authSelect->setCurrentIndex(auth);
authChanged(auth);
encrSelect->setCurrentIndex(encr);
- wepEnabled(auth == AUTH_NONE && encr == 1);
+ wepEnabled(auth == AUTH_NONE_WEP);
getEapCapa();
+
+ if (flags.indexOf("[WPS") >= 0)
+ useWpsButton->setEnabled(true);
+ bssid = sel->text(1);
}
void NetworkConfig::authChanged(int sel)
{
+ encrSelect->setEnabled(sel != AUTH_NONE_OPEN && sel != AUTH_NONE_WEP &&
+ sel != AUTH_NONE_WEP_SHARED);
pskEdit->setEnabled(sel == AUTH_WPA_PSK || sel == AUTH_WPA2_PSK);
bool eap = sel == AUTH_IEEE8021X || sel == AUTH_WPA_EAP ||
sel == AUTH_WPA2_EAP;
while (encrSelect->count())
encrSelect->removeItem(0);
- if (sel == AUTH_NONE || sel == AUTH_IEEE8021X) {
+ if (sel == AUTH_NONE_OPEN || sel == AUTH_NONE_WEP ||
+ sel == AUTH_NONE_WEP_SHARED || sel == AUTH_IEEE8021X) {
encrSelect->addItem("None");
encrSelect->addItem("WEP");
- encrSelect->setCurrentIndex(sel == AUTH_NONE ? 0 : 1);
+ encrSelect->setCurrentIndex(sel == AUTH_NONE_OPEN ? 0 : 1);
} else {
encrSelect->addItem("TKIP");
encrSelect->addItem("CCMP");
sel == AUTH_WPA2_EAP) ? 1 : 0);
}
- wepEnabled(sel == AUTH_IEEE8021X);
+ wepEnabled(sel == AUTH_NONE_WEP || sel == AUTH_NONE_WEP_SHARED);
}
if (auth == AUTH_WPA_PSK || auth == AUTH_WPA2_PSK) {
if (psklen < 8 || psklen > 64) {
- QMessageBox::warning(this, "WPA Pre-Shared Key Error",
- "WPA-PSK requires a passphrase "
- "of 8 to 63 characters\n"
- "or 64 hex digit PSK");
+ QMessageBox::warning(
+ this,
+ tr("WPA Pre-Shared Key Error"),
+ tr("WPA-PSK requires a passphrase of 8 to 63 "
+ "characters\n"
+ "or 64 hex digit PSK"));
pskEdit->setFocus();
return;
}
if (idstrEdit->isEnabled() && !idstrEdit->text().isEmpty()) {
QRegExp rx("^(\\w|-)+$");
if (rx.indexIn(idstrEdit->text()) < 0) {
- QMessageBox::warning(this, "Network ID Error",
- "Network ID String contains "
- "non-word characters.\n"
- "It must be a simple string, "
- "without spaces, containing\n"
- "only characters in this range: "
- "[A-Za-z0-9_-]\n");
+ QMessageBox::warning(
+ this, tr("Network ID Error"),
+ tr("Network ID String contains non-word "
+ "characters.\n"
+ "It must be a simple string, "
+ "without spaces, containing\n"
+ "only characters in this range: "
+ "[A-Za-z0-9_-]\n"));
idstrEdit->setFocus();
return;
}
if (new_network) {
wpagui->ctrlRequest("ADD_NETWORK", reply, &reply_len);
if (reply[0] == 'F') {
- QMessageBox::warning(this, "wpa_gui", "Failed to add "
- "network to wpa_supplicant\n"
- "configuration.");
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Failed to add "
+ "network to wpa_supplicant\n"
+ "configuration."));
return;
}
id = atoi(reply);
const char *key_mgmt = NULL, *proto = NULL, *pairwise = NULL;
switch (auth) {
- case AUTH_NONE:
+ case AUTH_NONE_OPEN:
+ case AUTH_NONE_WEP:
+ case AUTH_NONE_WEP_SHARED:
key_mgmt = "NONE";
break;
case AUTH_IEEE8021X:
break;
}
+ if (auth == AUTH_NONE_WEP_SHARED)
+ setNetworkParam(id, "auth_alg", "SHARED", false);
+ else
+ setNetworkParam(id, "auth_alg", "OPEN", false);
+
if (auth == AUTH_WPA_PSK || auth == AUTH_WPA_EAP ||
auth == AUTH_WPA2_PSK || auth == AUTH_WPA2_EAP) {
int encr = encrSelect->currentIndex();
setNetworkParam(id, "group", "TKIP CCMP WEP104 WEP40", false);
}
if (pskEdit->isEnabled() &&
- strcmp(passwordEdit->text().toAscii().constData(),
+ strcmp(pskEdit->text().toAscii().constData(),
WPA_GUI_KEY_DATA) != 0)
setNetworkParam(id, "psk",
pskEdit->text().toAscii().constData(),
reply_len = sizeof(reply);
wpagui->ctrlRequest(cmd, reply, &reply_len);
if (strncmp(reply, "OK", 2) != 0) {
- QMessageBox::warning(this, "wpa_gui", "Failed to enable "
- "network in wpa_supplicant\n"
- "configuration.");
+ QMessageBox::warning(this, "wpa_gui",
+ tr("Failed to enable "
+ "network in wpa_supplicant\n"
+ "configuration."));
/* Network was added, so continue anyway */
}
wpagui->triggerUpdate();
}
-void NetworkConfig::encrChanged(const QString &sel)
+void NetworkConfig::encrChanged(const QString &)
{
- wepEnabled(sel.indexOf("WEP") == 0);
}
wpa = 1;
}
- int auth = AUTH_NONE, encr = 0;
+ int auth = AUTH_NONE_OPEN, encr = 0;
snprintf(cmd, sizeof(cmd), "GET_NETWORK %d key_mgmt", network_id);
reply_len = sizeof(reply) - 1;
if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
reply_len = sizeof(reply) - 1;
if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
reply[reply_len] = '\0';
- if (strstr(reply, "CCMP") && auth != AUTH_NONE)
+ if (strstr(reply, "CCMP") && auth != AUTH_NONE_OPEN &&
+ auth != AUTH_NONE_WEP && auth != AUTH_NONE_WEP_SHARED)
encr = 1;
else if (strstr(reply, "TKIP"))
encr = 0;
if (strncmp(reply, "\"auth=", 6))
break;
if (strcmp(reply + 6, "GTC auth=MSCHAPV2") == 0) {
- val = "GTC(auth) + MSCHAPv2(prov)";
+ val = (char *) "GTC(auth) + MSCHAPv2(prov)";
break;
}
val = reply + 2;
pos = strchr(reply + 1, '"');
if (pos)
*pos = '\0';
- if (auth == AUTH_NONE || auth == AUTH_IEEE8021X)
+ if (auth == AUTH_NONE_OPEN || auth == AUTH_IEEE8021X) {
+ if (auth == AUTH_NONE_OPEN)
+ auth = AUTH_NONE_WEP;
encr = 1;
+ }
wepEdit->setText(reply + 1);
} else if (res >= 0 && key_value_isset(reply, reply_len)) {
- if (auth == AUTH_NONE || auth == AUTH_IEEE8021X)
+ if (auth == AUTH_NONE_OPEN || auth == AUTH_IEEE8021X) {
+ if (auth == AUTH_NONE_OPEN)
+ auth = AUTH_NONE_WEP;
encr = 1;
+ }
wepEdit->setText(WPA_GUI_KEY_DATA);
}
}
+ if (auth == AUTH_NONE_WEP) {
+ snprintf(cmd, sizeof(cmd), "GET_NETWORK %d auth_alg",
+ network_id);
+ reply_len = sizeof(reply) - 1;
+ if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0) {
+ reply[reply_len] = '\0';
+ if (strcmp(reply, "SHARED") == 0)
+ auth = AUTH_NONE_WEP_SHARED;
+ }
+ }
+
snprintf(cmd, sizeof(cmd), "GET_NETWORK %d wep_tx_keyidx", network_id);
reply_len = sizeof(reply) - 1;
if (wpagui->ctrlRequest(cmd, reply, &reply_len) >= 0 && reply_len >= 1)
authSelect->setCurrentIndex(auth);
authChanged(auth);
encrSelect->setCurrentIndex(encr);
- if (auth == AUTH_NONE || auth == AUTH_IEEE8021X)
- wepEnabled(encr == 1);
+ wepEnabled(auth == AUTH_NONE_WEP || auth == AUTH_NONE_WEP_SHARED);
removeButton->setEnabled(true);
addButton->setText("Save");
char reply[10], cmd[256];
size_t reply_len;
- if (QMessageBox::information(this, "wpa_gui",
- "This will permanently remove the "
- "network\n"
- "from the configuration. Do you really "
- "want\n"
- "to remove this network?", "Yes", "No")
- != 0)
+ if (QMessageBox::information(
+ this, "wpa_gui",
+ tr("This will permanently remove the network\n"
+ "from the configuration. Do you really want\n"
+ "to remove this network?"),
+ tr("Yes"), tr("No")) != 0)
return;
snprintf(cmd, sizeof(cmd), "REMOVE_NETWORK %d", edit_network_id);
wpagui->ctrlRequest(cmd, reply, &reply_len);
if (strncmp(reply, "OK", 2) != 0) {
QMessageBox::warning(this, "wpa_gui",
- "Failed to remove network from "
- "wpa_supplicant\n"
- "configuration.");
+ tr("Failed to remove network from "
+ "wpa_supplicant\n"
+ "configuration."));
} else {
wpagui->triggerUpdate();
wpagui->ctrlRequest("SAVE_CONFIG", reply, &reply_len);
QStringList types = res.split(QChar(' '));
eapSelect->insertItems(-1, types);
}
+
+
+void NetworkConfig::useWps()
+{
+ if (wpagui == NULL)
+ return;
+ wpagui->setBssFromScan(bssid);
+ wpagui->wpsDialog();
+ close();
+}