X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=aclocal.m4;h=e3b822d770dcef4c659a552fa4fb13779232ad1e;hb=refs%2Fheads%2Fmaster;hp=8b4e85506cfb4f1e243ec785f306547a6bea8dfc;hpb=7e2771a63c45c24d84396fe8745e42976a358222;p=freeradius.git diff --git a/aclocal.m4 b/aclocal.m4 index 8b4e855..e3b822d 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,1119 +1,157 @@ -## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- -## Copyright (C) 1996-1999 Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log -]) - -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -dnl - -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$lt_target" in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -]) -esac -]) - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) +# generated automatically by aclocal 1.10 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' else - AC_MSG_RESULT(no) + $1_TRUE='#' + $1_FALSE= fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) - -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi]) -]) - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library, adds --enable-ltdl-convenience to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library, and adds --enable-ltdl-install to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) - -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl - -dnl See whether we need a declaration for a function. -dnl RADIUSD_NEED_DECLARATION(FUNCTION [, EXTRA-HEADER-FILES]) -AC_DEFUN(RADIUSD_NEED_DECLARATION, -[AC_MSG_CHECKING([whether $1 must be declared]) -AC_CACHE_VAL(radius_cv_decl_needed_$1, -[AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_CRYPT_H -#include -#endif -#ifdef HAVE_ERRNO_H -#include -#endif -#ifdef HAVE_RESOURCE_H -#include -#endif -#ifdef HAVE_GETOPT_H -#include -#endif -#ifdef HAVE_MALLOC_H -#include -#endif -#ifdef HAVE_UTMP_H -#include -#endif -#ifdef HAVE_UTMPX_H -#include -#endif -#ifdef HAVE_SYS_SELECT_H -#include -#endif -#ifdef HAVE_DLFCN_H -#include -#endif -#ifdef HAVE_REGEX_H -#include -#endif -#ifdef HAVE_SYSLOG_H -#include -#endif -#ifdef HAVE_INTTYPES_H -#include -#endif -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_ARPA_INET_H -#include -#endif -$2], -[char *(*pfn) = (char *(*)) $1], -eval "radius_cv_decl_needed_$1=no", eval "radius_cv_decl_needed_$1=yes")]) -if eval "test \"`echo '$radius_cv_decl_needed_'$1`\" = yes"; then - AC_MSG_RESULT(yes) - radius_tr_decl=NEED_DECLARATION_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - AC_DEFINE_UNQUOTED($radius_tr_decl) -else - AC_MSG_RESULT(no) -fi -])dnl - -dnl Check multiple functions to see whether each needs a declaration. -dnl RADIUSD_NEED_DECLARATIONS(FUNCTION... [, EXTRA-HEADER-FILES]) -AC_DEFUN(RADIUSD_NEED_DECLARATIONS, -[for ac_func in $1 -do -RADIUSD_NEED_DECLARATION($ac_func, $2) -done -]) - -dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, -[AC_MSG_CHECKING(for working $2) -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if ($2 --version) < /dev/null > /dev/null 2>&1; then - $1=$2 - AC_MSG_RESULT(found) -else - $1="$3/missing $2" - AC_MSG_RESULT(missing) -fi -AC_SUBST($1)]) - - -dnl Checks to see if this is SUNPro we're building with -dnl Usage: -dnl AC_PROG_CC_SUNPRO -AC_DEFUN(AC_PROG_CC_SUNPRO, -[AC_CACHE_CHECK(whether we are using SUNPro C, ac_cv_prog_suncc, -[dnl The semicolon is to pacify NeXT's syntax-checking cpp. -cat > conftest.c </dev/null 2>&1; then - ac_cv_prog_suncc=yes -else - ac_cv_prog_suncc=no +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) -dnl # -dnl # AC_CHECK_TYPE_INCLUDE([#includes ...], type, default-C-types) -dnl # -dnl # This function is like AC_CHECK_TYPE, but you can give this one -dnl # a list of include files to check. -dnl # -AC_DEFUN(AC_CHECK_TYPE_INCLUDE, -[ - AC_CACHE_CHECK(for $2, ac_cv_type_$2, - [ ac_cv_type_$2=no - AC_TRY_COMPILE($1, - [$2 foo], - ac_cv_type_$2=yes, - ) - ] - ) - - if test "$ac_cv_type_$2" != "yes"; then - AC_DEFINE($2, $3) - fi -]) - -dnl Check the PostgreSQL installation - -AC_DEFUN(POSTGRESQL_CHECKS, [ - AC_SUBST(PGROOT) - AC_SUBST(PQ_LIBS) - AC_SUBST(PG_INCLUDE_DIR) - -AC_CHECKING(for PostgreSQL includes) - -dnl First Check for a local install -if test $PGROOT ; then - IS_LOCAL=1 -else - dnl Check common local install paths - if test -d /usr/local/pgsql ; then - PGROOT="/usr/local/pgsql" - ISLOCAL=1 - elif test -d /usr/local/postgresql ; then - PGROOT="/usr/local/postgresql" - ISLOCAL=1 - elif test -d /opt/pgsql ; then - PGROOT="/opt/pgsql" - ISLOCAL=1 - elif test -d /opt/postgresql ; then - PGROOT="/opt/postgresql" - ISLOCAL=1 - fi -fi -dnl If we have a local install path, check for some files -if test $PGROOT && test IS_LOCAL ; then - if test -e $PGROOT/lib/libpq${libltdl_cv_shlibext} ; then - if test -e $PGROOT/lib/libpq.a ; then - PQ_LIBS="-L$PGROOT/lib -lpq" - fi - fi - AC_CHECK_HEADERS($PGROOT/include/libpq-fe.h $PGROOT/include/postgres.h, - FOUND_PG_HEADERS=1) - if test $FOUND_PG_HEADERS ; then - PG_INCLUDE_DIR="$PGROOT/include" - fi -fi - -dnl Now check for the two common distribution installation locations -if test "x$PGROOT" = "x" ; then - AC_CHECK_LIB(pq,PQconnectdb,FOUND_PQLIB=1) - if test $FOUND_PQLIB ; then - PQ_LIBS="-lpq" - fi - if test -d /usr/include/pgsql ; then - PG_INCLUDE_DIR="/usr/include/pgsql" - PG_INCLUDED_DIR="$PG_INCLUDE_DIR/" - elif test -d /usr/include/postgresql ; then - PG_INCLUDE_DIR="/usr/include/postgresql" - PG_INCLUDED_DIR="$PG_INCLUDE_DIR/" - fi - AC_CHECK_HEADER("${PG_INCLUDED_DIR}libpq-fe.h",AC_DEFINE(HAVE_LIBPQ_FE_H)) - AC_CHECK_HEADER("${PG_INCLUDED_DIR}postgres.h",AC_DEFINE(HAVE_POSTGRES_H)) - if test $HAVE_HEADER-LIBPQ-FE.H ; then - PG_INCLUDE_DIR="$PG_INCLUDE_DIR" - fi - if test -d /usr/lib/pgsql ; then - PGROOT="/usr/lib/pgsql" - elif test -d /usr/lib/postgresql ; then - PGROOT="/usr/lib/postgresql" - fi -fi - -if test "$PGROOT" && test "$PQ_LIBS" && test "$PG_INCLUDE_DIR" ; then - echo Postgresql found in $PGROOT. -fi - -]) - -dnl ####################################################################### -dnl # -dnl # Look for ODBC in a variety of places. -dnl # -AC_DEFUN(ODBC_CHECKS, [ - AC_SUBST(ODBC_LIBS) - AC_SUBST(ODBC_INCLUDE) - -AC_MSG_CHECKING([for isql.h]) - -dnl # -dnl # First, see if we can build it WITHOUT using any special includes -dnl # -AC_TRY_COMPILE([#include ], - [ int a = 1;], - ODBC_INCLUDE=" ", - ODBC_INCLUDE=) - -dnl # -dnl # If not, look for it in a number of directories. -dnl # -if test "x$ODBC_INCLUDE" = "x"; then - old_CFLAGS="$CFLAGS" - - AC_LOCATE_DIR(odbc_include_dir, isql.h) - - for try in /usr/include /usr/local/include/odbc /usr/local/odbc/include $odbc_include_dir; do - CFLAGS="$old_CFLAGS -I$try" - AC_TRY_COMPILE([#include ], - [ int a = 1;], - ODBC_INCLUDE="-I$try", - ODBC_INCLUDE=) - if test "x$ODBC_INCLUDE" != "x"; then - break; - fi - done - CFLAGS="$old_CFLAGS" -fi - -if test "x$ODBC_INCLUDE" = "x"; then - AC_MSG_RESULT(no) -else - AC_MSG_RESULT(yes) - -dnl # -dnl # Now do the same thing, looking for the ODBC library directory -dnl # - AC_MSG_CHECKING([for odbc_init in -lodbcclient]) - -dnl # -dnl # Look for it in a number of directories. -dnl # - old_LIBS="$LIBS" +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - AC_LOCATE_DIR(odbc_lib_dir, [libodbcclient${libltdl_cv_shlibext}]) - AC_LOCATE_DIR(odbc_lib_dir, [libodbcclient.a]) +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. - for try in /usr/lib /usr/lib/odbc /usr/local/lib/odbc /usr/local/odbc/lib $odbc_lib_dir; do - LIBS="$old_LIBS -L$try -lodbcclient" - AC_TRY_LINK([extern char odbc_init();], - [ odbc_init()], - ODBC_LIBS="-L$try -lodbcclient", - ODBC_LIBS=) - if test "x$ODBC_LIBS" != "x"; then - break; - fi - done - LIBS="$old_LIBS" +# serial 5 - dnl # - dnl # If one or the other isn't found, disable them both.. - dnl # If both are found, enable them both. - dnl # - if test "x$ODBC_LIBS" = "x"; then - AC_MSG_RESULT(no) - ODBC_INCLUDE= - else - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_ISQL_H) - fi -fi -]) - -dnl ####################################################################### -dnl # -dnl # Look for SNMP in a variety of places. -dnl # -AC_DEFUN(SNMP_CHECKS, [ - AC_SUBST(SNMP_LIBS) - AC_SUBST(SNMP_INCLUDE) - -AC_MSG_CHECKING([for asn1.h]) - -dnl # -dnl # First, see if we can build it WITHOUT using any special includes -dnl # -AC_TRY_COMPILE([ -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_STDIO_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#include ], - [ int a = 1;], - SNMP_INCLUDE="", - SNMP_INCLUDE=) +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) -dnl # -dnl # If not, look for it in a number of directories. -dnl # -if test "x$SNMP_INCLUDE" = "x"; then - old_CFLAGS="$CFLAGS" - for try in /usr/include/ucd-snmp /usr/local/include/ucd-snmp $snmp_include_dir; do - CFLAGS="$old_CFLAGS -I$try" - AC_TRY_COMPILE([ -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_STDIO_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#include ], - [ int a = 1;], - SNMP_INCLUDE="-I$try", - SNMP_INCLUDE=) - if test "x$SNMP_INCLUDE" != "x"; then - break; - fi - done - CFLAGS="$old_CFLAGS" -fi -if test "x$SNMP_INCLUDE" = "x"; then - AC_MSG_RESULT(no) +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " else - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_ASN1_H) - -dnl # -dnl # Check for the rest of the SNMP headers. -dnl # - old_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $SNMP_INCLUDE" - - AC_MSG_CHECKING(for snmp.h) - AC_TRY_COMPILE([ -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_STDIO_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_ASN1_H -#include -#endif -#include ], - [ int a = 1;], - [AC_DEFINE(HAVE_SNMP_H) ac_cv_header_snmp_h=yes]) - if test "x$ac_cv_header_snmp_h" = "xyes"; then - AC_MSG_RESULT(yes) - else - AC_MSG_RESULT(no) - fi - - AC_MSG_CHECKING(for snmp_impl.h) - AC_TRY_COMPILE([ -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_STDIO_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_ASN1_H -#include -#endif -#ifdef HAVE_SNMP_H -#include -#endif -#include ], - [ int a = 1;], - [AC_DEFINE(HAVE_SNMP_IMPL_H) ac_cv_header_snmp_impl_h=yes]) - if test "x$ac_cv_header_snmp_h" = "xyes"; then - AC_MSG_RESULT(yes) - else - AC_MSG_RESULT(no) - fi - -dnl # -dnl # Now do the same thing, looking for the SNMP library directory -dnl # - AC_MSG_CHECKING([for snmp_build_var_op in -lsnmp]) - -dnl # -dnl # First, see if we can build it WITHOUT using any special includes -dnl # - old_LIBS="$LIBS" - LIBS="$old_LIBS -lsnmp" - AC_TRY_LINK([extern char snmp_build_var_op();], - [ snmp_build_var_op()], - SNMP_LIBS="-lsnmp", - SNMP_LIBS=) - - - for try in /usr/lib /usr/local/lib /usr/local/snmp/lib $snmp_lib_dir; do - LIBS="$old_LIBS -L$try -lsnmp" - AC_TRY_LINK([extern char snmp_build_var_op();], - [ snmp_build_var_op()], - SNMP_LIBS="-L$try -lsnmp", - SNMP_LIBS=) - if test "x$SNMP_LIBS" != "x"; then - break; - fi - -dnl # -dnl # That didn't work. Try adding the '-lcrypto' line. -dnl # Some SNMP libraries are linked against SSL... -dnl # - LIBS="$old_LIBS -L$try -lsnmp -lcrypto" - AC_TRY_LINK([extern char snmp_build_var_op();], - [ snmp_build_var_op()], - SNMP_LIBS="-L$try -lsnmp -lcrypto", - SNMP_LIBS=) - if test "x$SNMP_LIBS" != "x"; then - break; - fi - done - LIBS="$old_LIBS" - - dnl # - dnl # If one or the other isn't found, disable them both.. - dnl # If both are found, enable them both. - dnl # - CFLAGS="$old_CFLAGS" - if test "x$SNMP_LIBS" = "x"; then - AC_MSG_RESULT(no) - SNMP_INCLUDE= - else - AC_MSG_RESULT(yes) - AC_DEFINE(WITH_SNMP) - AC_DEFINE(HAVE_LIBSNMP) - fi + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) fi ]) - -dnl # -dnl # Locate the directory in which a particular file is found. -dnl # -dnl # Usage: AC_LOCATE_DIR(MYSQLLIB_DIR, libmysqlclient.a) -dnl # -dnl # Defines the variable MYSQLLIB_DIR to be the directory(s) in -dnl # which the file libmysqlclient.a is to be found. -dnl # -dnl # -AC_DEFUN(AC_LOCATE_DIR, -[ -dnl # If we have the program 'locate', then the problem of finding a -dnl # particular file becomes MUCH easier. -dnl # - -dnl # -dnl # No 'locate' defined, do NOT do anything. -dnl # -if test "x$LOCATE" != "x"; then - dnl # - dnl # Root through a series of directories, looking for the given file. - dnl # - DIRS= - file=$2 - - for x in `${LOCATE} $file 2>/dev/null`; do - dnl # - dnl # When asked for 'foo', locate will also find 'foo_bar', which we - dnl # don't want. We want that EXACT filename. - dnl # - dnl # We ALSO want to be able to look for files like 'mysql/mysql.h', - dnl # and properly match them, too. So we try to strip off the last - dnl # part of the filename, using the name of the file we're looking - dnl # for. If we CANNOT strip it off, then the name will be unchanged. - dnl # - base=`echo $x | sed "s%/${file}%%"` - if test "x$x" = "x$base"; then - continue; - fi - - dir=`${DIRNAME} $x 2>/dev/null` - dnl # - dnl # Exclude a number of directories. - dnl # - exclude=`echo ${dir} | ${GREP} /home` - if test "x$exclude" != "x"; then - continue - fi - - dnl # - dnl # OK, we have an exact match. Let's be sure that we only find ONE - dnl # matching directory. - dnl # - already=`echo \$$1 ${DIRS} | ${GREP} ${dir}` - if test "x$already" = "x"; then - DIRS="$DIRS $dir" - fi - done -fi - -dnl # -dnl # And remember the directory in which we found the file. -dnl # -eval "$1=\"\$$1 $DIRS\"" -]) - - -dnl ####################################################################### -dnl # -dnl # Look for a library in a number of places. -dnl # -AC_DEFUN(AC_SMART_CHECK_LIB, [ - -AC_MSG_CHECKING([for $2 in -l$1]) - -smart_lib= -smart_lib_dir= - -dnl # -dnl # Try to link it first, using the default libs && library paths -dnl # - old_LIBS="$LIBS" - LIBS="$LIBS -l$1" - AC_TRY_LINK([extern char $2();], - [ $2()], - smart_lib="-l$1") - - if test "x$smart_lib" = "x"; then - AC_LOCATE_DIR(smart_lib_dir,[lib$1${libltdl_cv_shlibext}]) - AC_LOCATE_DIR(smart_lib_dir,[lib$1.a]) - - for try in $smart_try_dir $smart_lib_dir /usr/local/lib/ /opt/lib; do - LIBS="$old_LIBS -L$try -l$1" - - AC_TRY_LINK([extern char $2();], - [ $2()], - smart_lib="-L$try -l$1") - if test "x$smart_lib" != "x"; then - break; - fi - done - LIBS="$old_LIBS" - fi - - dnl # - dnl # Found it, set the appropriate variable. - dnl # - if test "x$smart_lib" != "x"; then - AC_MSG_RESULT(yes) - eval "ac_cv_lib_$1_$2=yes" - LIBS="$old_LIBS $smart_lib" - SMART_LIBS="$SMART_LIBS $smart_lib" - else - AC_MSG_RESULT(no) -fi -]) - -dnl ####################################################################### -dnl # -dnl # Look for a header file in a number of places. -dnl # -AC_DEFUN(AC_SMART_CHECK_INCLUDE, [ - -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -AC_MSG_CHECKING([for $1]) - -smart_include= -smart_include_dir= - -dnl # -dnl # Try to link it first, using the default includes -dnl # - old_CFLAGS="$CFLAGS" - AC_TRY_COMPILE([#include <$1>], - [ int a = 1;], - smart_include=" ", - smart_include=) - - if test "x$smart_include" = "x"; then - AC_LOCATE_DIR(smart_include_dir,$1) - - for try in $smart_try_dir $smart_include_dir /usr/local/include/ /opt/include; do - CFLAGS="$old_CFLAGS -I$try" - - AC_TRY_COMPILE([#include <$1>], - [ int a = 1;], - smart_include="-I$try", - smart_include=) - - if test "x$smart_include" != "x"; then - break; - fi - done - CFLAGS="$old_CFLAGS" - fi - - dnl # - dnl # Found it, set the appropriate variable. - dnl # - if test "x$smart_include" != "x"; then - AC_MSG_RESULT(yes) - eval "ac_cv_header_$ac_safe=yes" - CFLAGS="$old_CFLAGS $smart_include" - SMART_CFLAGS="$SMART_CFLAGS $smart_include" - else - AC_MSG_RESULT(no) -fi -]) - -dnl ####################################################################### -dnl # -dnl # Look for a header file in a number of places. -dnl # -dnl # Usage: AC_CHECK_STRUCT_HAS_MEMBER([#include ], [struct foo], member) -dnl # If the member is defined, then the variable -dnl # ac_cv_type_struct_foo_member is set to 'yes' -dnl # -AC_DEFUN(AC_CHECK_STRUCT_HAS_MEMBER, [ - AC_MSG_CHECKING([for $3 in $2]) - -dnl BASED on 'offsetof': -dnl #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) -dnl - - AC_TRY_COMPILE([ -$1 -#ifndef offsetof -#define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER) -#endif -], - [ int foo = offsetof($2, $3) ], - has_element=" ", - has_element=) - - ac_safe_type=`echo "$2" | sed 'y% %_%'` - if test "x$has_element" != "x"; then - AC_MSG_RESULT(yes) - eval "ac_cv_type_${ac_safe_type}_has_$3=yes" - else - AC_MSG_RESULT(no) - eval "ac_cv_type_${ac_safe_type}_has_$3=" - fi -]) +# Copyright (C) 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +m4_include([libltdl/m4/argz.m4]) +m4_include([libltdl/m4/libtool.m4]) +m4_include([libltdl/m4/ltdl.m4]) +m4_include([libltdl/m4/ltoptions.m4]) +m4_include([libltdl/m4/ltsugar.m4]) +m4_include([libltdl/m4/ltversion.m4]) +m4_include([libltdl/m4/lt~obsolete.m4]) +m4_include([acinclude.m4])