X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=libeap%2Fwpa_supplicant%2Fexamples%2Fudhcpd-p2p.conf;fp=libeap%2Fwpa_supplicant%2Fexamples%2Fudhcpd-p2p.conf;h=0000000000000000000000000000000000000000;hb=a7df36f97a1fb71de656c752100dd0389dfb8226;hp=b94f94f9e494d8e126efa56318bdde8ccc94ad40;hpb=28dcddb8f970a440e1494cdbbd9c271dbf8853ce;p=mech_eap.git diff --git a/libeap/wpa_supplicant/examples/udhcpd-p2p.conf b/libeap/wpa_supplicant/examples/udhcpd-p2p.conf deleted file mode 100644 index b94f94f..0000000 --- a/libeap/wpa_supplicant/examples/udhcpd-p2p.conf +++ /dev/null @@ -1,120 +0,0 @@ -# Sample udhcpd configuration file (/etc/udhcpd.conf) - -# The start and end of the IP lease block - -start 192.168.42.20 #default: 192.168.0.20 -end 192.168.42.254 #default: 192.168.0.254 - - -# The interface that udhcpd will use - -interface wlan2 #default: eth0 - - -# The maximim number of leases (includes addressesd reserved -# by OFFER's, DECLINE's, and ARP conficts - -#max_leases 254 #default: 254 - - -# If remaining is true (default), udhcpd will store the time -# remaining for each lease in the udhcpd leases file. This is -# for embedded systems that cannot keep time between reboots. -# If you set remaining to no, the absolute time that the lease -# expires at will be stored in the dhcpd.leases file. - -#remaining yes #default: yes - - -# The time period at which udhcpd will write out a dhcpd.leases -# file. If this is 0, udhcpd will never automatically write a -# lease file. (specified in seconds) - -#auto_time 7200 #default: 7200 (2 hours) - - -# The amount of time that an IP will be reserved (leased) for if a -# DHCP decline message is received (seconds). - -#decline_time 3600 #default: 3600 (1 hour) - - -# The amount of time that an IP will be reserved (leased) for if an -# ARP conflct occurs. (seconds - -#conflict_time 3600 #default: 3600 (1 hour) - - -# How long an offered address is reserved (leased) in seconds - -#offer_time 60 #default: 60 (1 minute) - -# If a lease to be given is below this value, the full lease time is -# instead used (seconds). - -#min_lease 60 #defult: 60 - - -# The location of the leases file - -#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases - -# The location of the pid file -pidfile /var/run/udhcpd-wlan2.pid #default: /var/run/udhcpd.pid - -# Everytime udhcpd writes a leases file, the below script will be called. -# Useful for writing the lease file to flash every few hours. - -#notify_file #default: (no script) - -#notify_file dumpleases # <--- usefull for debugging - -# The following are bootp specific options, setable by udhcpd. - -#siaddr 192.168.0.22 #default: 0.0.0.0 - -#sname zorak #default: (none) - -#boot_file /var/nfs_root #default: (none) - -# The remainer of options are DHCP options and can be specifed with the -# keyword 'opt' or 'option'. If an option can take multiple items, such -# as the dns option, they can be listed on the same line, or multiple -# lines. The only option with a default is 'lease'. - -#Examles -opt dns 192.168.2.1 -option subnet 255.255.255.0 -option domain atherosowl.com -option lease 864000 # 10 days of seconds - - -# Currently supported options, for more info, see options.c -#opt subnet -#opt timezone -#opt router -#opt timesvr -#opt namesvr -#opt dns -#opt logsvr -#opt cookiesvr -#opt lprsvr -#opt bootsize -#opt domain -#opt swapsvr -#opt rootpath -#opt ipttl -#opt mtu -#opt broadcast -#opt wins -#opt lease -#opt ntpsrv -#opt tftp -#opt bootfile - - -# Static leases map -#static_lease 00:60:08:11:CE:4E 192.168.0.54 -#static_lease 00:60:08:11:CE:3E 192.168.0.44 - -