X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=src%2Fdrivers%2Fdriver.h;h=a85ed325888768941301f7152a5e73cf5ac60451;hb=4ac2ea57382f2487c5f930609528801cf4583e20;hp=d73e6fdcda0102c712c12ecdd2e4d209e6792395;hpb=7c813acf9ca69f3c6d442ce820237249a6216201;p=mech_eap.git diff --git a/src/drivers/driver.h b/src/drivers/driver.h index d73e6fd..a85ed32 100644 --- a/src/drivers/driver.h +++ b/src/drivers/driver.h @@ -45,6 +45,22 @@ #define HOSTAPD_CHAN_INDOOR_ONLY 0x00010000 #define HOSTAPD_CHAN_GO_CONCURRENT 0x00020000 +#define HOSTAPD_CHAN_VHT_10_150 0x00100000 +#define HOSTAPD_CHAN_VHT_30_130 0x00200000 +#define HOSTAPD_CHAN_VHT_50_110 0x00400000 +#define HOSTAPD_CHAN_VHT_70_90 0x00800000 +#define HOSTAPD_CHAN_VHT_90_70 0x01000000 +#define HOSTAPD_CHAN_VHT_110_50 0x02000000 +#define HOSTAPD_CHAN_VHT_130_30 0x04000000 +#define HOSTAPD_CHAN_VHT_150_10 0x08000000 + +/* Filter gratuitous ARP */ +#define WPA_DATA_FRAME_FILTER_FLAG_ARP BIT(0) +/* Filter unsolicited Neighbor Advertisement */ +#define WPA_DATA_FRAME_FILTER_FLAG_NA BIT(1) +/* Filter unicast IP packets encrypted using the GTK */ +#define WPA_DATA_FRAME_FILTER_FLAG_GTK BIT(2) + /** * enum reg_change_initiator - Regulatory change initiator */ @@ -284,6 +300,18 @@ struct wpa_interface_info { #define WPAS_MAX_SCAN_SSIDS 16 /** + * struct wpa_driver_scan_ssid - SSIDs to scan for + * @ssid - specific SSID to scan for (ProbeReq) + * %NULL or zero-length SSID is used to indicate active scan + * with wildcard SSID. + * @ssid_len - Length of the SSID in octets + */ +struct wpa_driver_scan_ssid { + const u8 *ssid; + size_t ssid_len; +}; + +/** * struct wpa_driver_scan_params - Scan parameters * Data for struct wpa_driver_ops::scan2(). */ @@ -291,18 +319,7 @@ struct wpa_driver_scan_params { /** * ssids - SSIDs to scan for */ - struct wpa_driver_scan_ssid { - /** - * ssid - specific SSID to scan for (ProbeReq) - * %NULL or zero-length SSID is used to indicate active scan - * with wildcard SSID. - */ - const u8 *ssid; - /** - * ssid_len: Length of the SSID in octets - */ - size_t ssid_len; - } ssids[WPAS_MAX_SCAN_SSIDS]; + struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS]; /** * num_ssids - Number of entries in ssids array @@ -407,6 +424,37 @@ struct wpa_driver_scan_params { */ const u8 *mac_addr_mask; + /** + * sched_scan_plans - Scan plans for scheduled scan + * + * Each scan plan consists of the number of iterations to scan and the + * interval between scans. When a scan plan finishes (i.e., it was run + * for the specified number of iterations), the next scan plan is + * executed. The scan plans are executed in the order they appear in + * the array (lower index first). The last scan plan will run infinitely + * (until requested to stop), thus must not specify the number of + * iterations. All other scan plans must specify the number of + * iterations. + */ + struct sched_scan_plan { + u32 interval; /* In seconds */ + u32 iterations; /* Zero to run infinitely */ + } *sched_scan_plans; + + /** + * sched_scan_plans_num - Number of scan plans in sched_scan_plans array + */ + unsigned int sched_scan_plans_num; + + /** + * bssid - Specific BSSID to scan for + * + * This optional parameter can be used to replace the default wildcard + * BSSID with a specific BSSID to scan for if results are needed from + * only a single BSS. + */ + const u8 *bssid; + /* * NOTE: Whenever adding new parameters here, please make sure * wpa_scan_clone_params() and wpa_scan_free_params() get updated with @@ -828,6 +876,12 @@ struct wpa_driver_associate_params { * RRM (Radio Resource Measurements) */ int rrm_used; + + /** + * pbss - If set, connect to a PCP in a PBSS. Otherwise, connect to an + * AP as usual. Valid for DMG network only. + */ + int pbss; }; enum hide_ssid { @@ -1055,6 +1109,12 @@ struct wpa_driver_ap_params { * reenable - Whether this is to re-enable beaconing */ int reenable; + + /** + * pbss - Whether to start a PCP (in PBSS) instead of an AP in + * infrastructure BSS. Valid only for DMG network. + */ + int pbss; }; struct wpa_driver_mesh_bss_params { @@ -1075,6 +1135,7 @@ struct wpa_driver_mesh_join_params { int ie_len; struct hostapd_freq_params freq; int beacon_int; + int dtim_period; int max_peer_links; struct wpa_driver_mesh_bss_params conf; #define WPA_DRIVER_MESH_FLAG_USER_MPM 0x00000001 @@ -1214,8 +1275,17 @@ struct wpa_driver_capa { #define WPA_DRIVER_FLAGS_VHT_IBSS 0x0000002000000000ULL /** Driver supports automatic band selection */ #define WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY 0x0000004000000000ULL +/** Driver supports simultaneous off-channel operations */ +#define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL +/** Driver supports full AP client state */ +#define WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE 0x0000010000000000ULL +/** Driver supports P2P Listen offload */ +#define WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD 0x0000020000000000ULL u64 flags; +#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \ + (drv_flags & WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE) + #define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001 #define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002 unsigned int smps_modes; @@ -1231,6 +1301,15 @@ struct wpa_driver_capa { /** Maximum number of supported active probe SSIDs for sched_scan */ int max_sched_scan_ssids; + /** Maximum number of supported scan plans for scheduled scan */ + unsigned int max_sched_scan_plans; + + /** Maximum interval in a scan plan. In seconds */ + u32 max_sched_scan_plan_interval; + + /** Maximum number of iterations in a single scan plan */ + u32 max_sched_scan_plan_iterations; + /** Whether sched_scan (offloaded scanning) is supported */ int sched_scan_supported; @@ -1296,6 +1375,12 @@ struct wpa_driver_capa { * offset, namely the 6th byte in the Action frame body. */ #define WPA_DRIVER_FLAGS_TX_POWER_INSERTION 0x00000008 +/** + * Driver supports RRM. With this support, the driver will accept to use RRM in + * (Re)Association Request frames, without supporting quiet period. + */ +#define WPA_DRIVER_FLAGS_SUPPORT_RRM 0x00000010 + u32 rrm_flags; /* Driver concurrency capabilities */ @@ -1304,13 +1389,18 @@ struct wpa_driver_capa { unsigned int max_conc_chan_2_4; /* Maximum number of concurrent channels on 5 GHz */ unsigned int max_conc_chan_5_0; + + /* Maximum number of supported CSA counters */ + u16 max_csa_counters; }; struct hostapd_data; struct hostap_sta_driver_data { - unsigned long rx_packets, tx_packets, rx_bytes, tx_bytes; + unsigned long rx_packets, tx_packets; + unsigned long long rx_bytes, tx_bytes; + int bytes_64bit; /* whether 64-bit byte counters are supported */ unsigned long current_tx_rate; unsigned long inactive_msec; unsigned long flags; @@ -1336,6 +1426,7 @@ struct hostapd_sta_add_params { u32 flags_mask; /* unset bits in flags */ #ifdef CONFIG_MESH enum mesh_plink_state plink_state; + u16 peer_aid; #endif /* CONFIG_MESH */ int set; /* Set STA parameters instead of add */ u8 qosinfo; @@ -1345,6 +1436,7 @@ struct hostapd_sta_add_params { size_t supp_channels_len; const u8 *supp_oper_classes; size_t supp_oper_classes_len; + int support_p2p_ps; }; struct mac_address { @@ -1404,6 +1496,16 @@ enum wpa_driver_if_type { * WPA_IF_MESH - Mesh interface */ WPA_IF_MESH, + + /* + * WPA_IF_TDLS - TDLS offchannel interface (used for pref freq only) + */ + WPA_IF_TDLS, + + /* + * WPA_IF_IBSS - IBSS interface (used for pref freq only) + */ + WPA_IF_IBSS, }; struct wpa_init_params { @@ -1440,6 +1542,7 @@ struct wpa_bss_params { #define WPA_STA_MFP BIT(3) #define WPA_STA_TDLS_PEER BIT(4) #define WPA_STA_AUTHENTICATED BIT(5) +#define WPA_STA_ASSOCIATED BIT(6) enum tdls_oper { TDLS_DISCOVERY_REQ, @@ -1544,8 +1647,8 @@ struct csa_settings { struct beacon_data beacon_csa; struct beacon_data beacon_after; - u16 counter_offset_beacon; - u16 counter_offset_presp; + u16 counter_offset_beacon[2]; + u16 counter_offset_presp[2]; }; /* TDLS peer capabilities for send_tdls_mgmt() */ @@ -1873,6 +1976,14 @@ struct wpa_driver_ops { void (*poll)(void *priv); /** + * get_ifindex - Get interface index + * @priv: private driver interface data + * + * Returns: Interface index + */ + unsigned int (*get_ifindex)(void *priv); + + /** * get_ifname - Get interface name * @priv: private driver interface data * @@ -1950,10 +2061,13 @@ struct wpa_driver_ops { * @noack: Do not wait for this frame to be acked (disable retries) * @freq: Frequency (in MHz) to send the frame on, or 0 to let the * driver decide + * @csa_offs: Array of CSA offsets or %NULL + * @csa_offs_len: Number of elements in csa_offs * Returns: 0 on success, -1 on failure */ int (*send_mlme)(void *priv, const u8 *data, size_t data_len, - int noack, unsigned int freq); + int noack, unsigned int freq, const u16 *csa_offs, + size_t csa_offs_len); /** * update_ft_ies - Update FT (IEEE 802.11r) IEs @@ -2003,6 +2117,7 @@ struct wpa_driver_ops { /** * global_init - Global driver initialization + * @ctx: wpa_global pointer * Returns: Pointer to private data (global), %NULL on failure * * This optional function is called to initialize the driver wrapper @@ -2012,7 +2127,7 @@ struct wpa_driver_ops { * use init2() function instead of init() to get the pointer to global * data available to per-interface initializer. */ - void * (*global_init)(void); + void * (*global_init)(void *ctx); /** * global_deinit - Global driver deinitialization @@ -2298,12 +2413,17 @@ struct wpa_driver_ops { * @params: Station parameters * Returns: 0 on success, -1 on failure * - * This function is used to add a station entry to the driver once the - * station has completed association. This is only used if the driver + * This function is used to add or set (params->set 1) a station + * entry in the driver. Adding STA entries is used only if the driver * does not take care of association processing. * - * With TDLS, this function is also used to add or set (params->set 1) - * TDLS peer entries. + * With drivers that don't support full AP client state, this function + * is used to add a station entry to the driver once the station has + * completed association. + * + * With TDLS, this function is used to add or set (params->set 1) + * TDLS peer entries (even with drivers that do not support full AP + * client state). */ int (*sta_add)(void *priv, struct hostapd_sta_add_params *params); @@ -2389,12 +2509,13 @@ struct wpa_driver_ops { * change interface address) * @bridge: Bridge interface to use or %NULL if no bridge configured * @use_existing: Whether to allow existing interface to be used + * @setup_ap: Whether to setup AP for %WPA_IF_AP_BSS interfaces * Returns: 0 on success, -1 on failure */ int (*if_add)(void *priv, enum wpa_driver_if_type type, const char *ifname, const u8 *addr, void *bss_ctx, void **drv_priv, char *force_ifname, u8 *if_addr, - const char *bridge, int use_existing); + const char *bridge, int use_existing, int setup_ap); /** * if_remove - Remove a virtual interface @@ -2976,7 +3097,6 @@ struct wpa_driver_ops { * sched_scan - Request the driver to initiate scheduled scan * @priv: Private driver interface data * @params: Scan parameters - * @interval: Interval between scan cycles in milliseconds * Returns: 0 on success, -1 on failure * * This operation should be used for scheduled scan offload to @@ -2987,8 +3107,7 @@ struct wpa_driver_ops { * and if not provided or if it returns -1, we fall back to * normal host-scheduled scans. */ - int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params, - u32 interval); + int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params); /** * stop_sched_scan - Request the driver to stop a scheduled scan @@ -3405,6 +3524,20 @@ struct wpa_driver_ops { int (*set_band)(void *priv, enum set_band band); /** + * get_pref_freq_list - Get preferred frequency list for an interface + * @priv: Private driver interface data + * @if_type: Interface type + * @num: Number of channels + * @freq_list: Preferred channel frequency list encoded in MHz values + * Returns 0 on success, -1 on failure + * + * This command can be used to query the preferred frequency list from + * the driver specific to a particular interface type. + */ + int (*get_pref_freq_list)(void *priv, enum wpa_driver_if_type if_type, + unsigned int *num, unsigned int *freq_list); + + /** * set_prob_oper_freq - Indicate probable P2P operating channel * @priv: Private driver interface data * @freq: Channel frequency in MHz @@ -3415,6 +3548,61 @@ struct wpa_driver_ops { * on. Local device is assuming P2P Client role. */ int (*set_prob_oper_freq)(void *priv, unsigned int freq); + + /** + * abort_scan - Request the driver to abort an ongoing scan + * @priv: Private driver interface data + * Returns 0 on success, -1 on failure + */ + int (*abort_scan)(void *priv); + + /** + * configure_data_frame_filters - Request to configure frame filters + * @priv: Private driver interface data + * @filter_flags: The type of frames to filter (bitfield of + * WPA_DATA_FRAME_FILTER_FLAG_*) + * Returns: 0 on success or -1 on failure + */ + int (*configure_data_frame_filters)(void *priv, u32 filter_flags); + + /** + * get_ext_capab - Get extended capabilities for the specified interface + * @priv: Private driver interface data + * @type: Interface type for which to get extended capabilities + * @ext_capab: Extended capabilities fetched + * @ext_capab_mask: Extended capabilities mask + * @ext_capab_len: Length of the extended capabilities + * Returns: 0 on success or -1 on failure + */ + int (*get_ext_capab)(void *priv, enum wpa_driver_if_type type, + const u8 **ext_capab, const u8 **ext_capab_mask, + unsigned int *ext_capab_len); + + /** + * p2p_lo_start - Start offloading P2P listen to device + * @priv: Private driver interface data + * @freq: Listening frequency (MHz) for P2P listen + * @period: Length of the listen operation in milliseconds + * @interval: Interval for running the listen operation in milliseconds + * @count: Number of times to run the listen operation + * @device_types: Device primary and secondary types + * @dev_types_len: Number of bytes for device_types + * @ies: P2P IE and WSC IE for Probe Response frames + * @ies_len: Length of ies in bytes + * Returns: 0 on success or -1 on failure + */ + int (*p2p_lo_start)(void *priv, unsigned int freq, + unsigned int period, unsigned int interval, + unsigned int count, + const u8 *device_types, size_t dev_types_len, + const u8 *ies, size_t ies_len); + + /** + * p2p_lo_stop - Stop P2P listen offload + * @priv: Private driver interface data + * Returns: 0 on success or -1 on failure + */ + int (*p2p_lo_stop)(void *priv); }; @@ -3899,6 +4087,11 @@ enum wpa_event_type { * on a DFS frequency by a driver that supports DFS Offload. */ EVENT_DFS_CAC_STARTED, + + /** + * EVENT_P2P_LO_STOP - Notify that P2P listen offload is stopped + */ + EVENT_P2P_LO_STOP, }; @@ -4074,6 +4267,12 @@ union wpa_event_data { * ptk_kek_len - The length of ptk_kek */ size_t ptk_kek_len; + + /** + * subnet_status - The subnet status: + * 0 = unknown, 1 = unchanged, 2 = changed + */ + u8 subnet_status; } assoc_info; /** @@ -4150,6 +4349,7 @@ union wpa_event_data { * struct interface_status - Data for EVENT_INTERFACE_STATUS */ struct interface_status { + unsigned int ifindex; char ifname[100]; enum { EVENT_INTERFACE_ADDED, EVENT_INTERFACE_REMOVED @@ -4277,6 +4477,12 @@ union wpa_event_data { * status_code - Status Code from (Re)association Response */ u16 status_code; + + /** + * timed_out - Whether failure is due to timeout (etc.) rather + * than explicit rejection response from the AP. + */ + int timed_out; } assoc_reject; struct timeout_event { @@ -4357,6 +4563,9 @@ union wpa_event_data { * @ssids: Scanned SSIDs (%NULL or zero-length SSID indicates wildcard * SSID) * @num_ssids: Number of entries in ssids array + * @external_scan: Whether the scan info is for an external scan + * @nl_scan_event: 1 if the source of this scan event is a normal scan, + * 0 if the source of the scan event is a vendor scan */ struct scan_info { int aborted; @@ -4364,6 +4573,8 @@ union wpa_event_data { size_t num_freqs; struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS]; size_t num_ssids; + int external_scan; + int nl_scan_event; } scan_info; /** @@ -4606,6 +4817,27 @@ union wpa_event_data { u16 ch_width; enum hostapd_hw_mode hw_mode; } acs_selected_channels; + + /** + * struct p2p_lo_stop - Reason code for P2P Listen offload stop event + * @reason_code: Reason for stopping offload + * P2P_LO_STOPPED_REASON_COMPLETE: Listen offload finished as + * scheduled. + * P2P_LO_STOPPED_REASON_RECV_STOP_CMD: Host requested offload to + * be stopped. + * P2P_LO_STOPPED_REASON_INVALID_PARAM: Invalid listen offload + * parameters. + * P2P_LO_STOPPED_REASON_NOT_SUPPORTED: Listen offload not + * supported by device. + */ + struct p2p_lo_stop { + enum { + P2P_LO_STOPPED_REASON_COMPLETE = 0, + P2P_LO_STOPPED_REASON_RECV_STOP_CMD, + P2P_LO_STOPPED_REASON_INVALID_PARAM, + P2P_LO_STOPPED_REASON_NOT_SUPPORTED, + } reason_code; + } p2p_lo_stop; }; /** @@ -4621,6 +4853,18 @@ union wpa_event_data { void wpa_supplicant_event(void *ctx, enum wpa_event_type event, union wpa_event_data *data); +/** + * wpa_supplicant_event_global - Report a driver event for wpa_supplicant + * @ctx: Context pointer (wpa_s); this is the ctx variable registered + * with struct wpa_driver_ops::init() + * @event: event type (defined above) + * @data: possible extra data for the event + * + * Same as wpa_supplicant_event(), but we search for the interface in + * wpa_global. + */ +void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event, + union wpa_event_data *data); /* * The following inline functions are provided for convenience to simplify @@ -4673,8 +4917,52 @@ int vht_supported(const struct hostapd_hw_modes *mode); struct wowlan_triggers * wpa_get_wowlan_triggers(const char *wowlan_triggers, const struct wpa_driver_capa *capa); +/* Convert driver flag to string */ +const char * driver_flag_to_string(u64 flag); /* NULL terminated array of linked in driver wrappers */ extern const struct wpa_driver_ops *const wpa_drivers[]; + +/* Available drivers */ + +#ifdef CONFIG_DRIVER_WEXT +extern const struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */ +#endif /* CONFIG_DRIVER_WEXT */ +#ifdef CONFIG_DRIVER_NL80211 +/* driver_nl80211.c */ +extern const struct wpa_driver_ops wpa_driver_nl80211_ops; +#endif /* CONFIG_DRIVER_NL80211 */ +#ifdef CONFIG_DRIVER_HOSTAP +extern const struct wpa_driver_ops wpa_driver_hostap_ops; /* driver_hostap.c */ +#endif /* CONFIG_DRIVER_HOSTAP */ +#ifdef CONFIG_DRIVER_BSD +extern const struct wpa_driver_ops wpa_driver_bsd_ops; /* driver_bsd.c */ +#endif /* CONFIG_DRIVER_BSD */ +#ifdef CONFIG_DRIVER_OPENBSD +/* driver_openbsd.c */ +extern const struct wpa_driver_ops wpa_driver_openbsd_ops; +#endif /* CONFIG_DRIVER_OPENBSD */ +#ifdef CONFIG_DRIVER_NDIS +extern struct wpa_driver_ops wpa_driver_ndis_ops; /* driver_ndis.c */ +#endif /* CONFIG_DRIVER_NDIS */ +#ifdef CONFIG_DRIVER_WIRED +extern const struct wpa_driver_ops wpa_driver_wired_ops; /* driver_wired.c */ +#endif /* CONFIG_DRIVER_WIRED */ +#ifdef CONFIG_DRIVER_MACSEC_QCA +/* driver_macsec_qca.c */ +extern const struct wpa_driver_ops wpa_driver_macsec_qca_ops; +#endif /* CONFIG_DRIVER_MACSEC_QCA */ +#ifdef CONFIG_DRIVER_ROBOSWITCH +/* driver_roboswitch.c */ +extern const struct wpa_driver_ops wpa_driver_roboswitch_ops; +#endif /* CONFIG_DRIVER_ROBOSWITCH */ +#ifdef CONFIG_DRIVER_ATHEROS +/* driver_atheros.c */ +extern const struct wpa_driver_ops wpa_driver_atheros_ops; +#endif /* CONFIG_DRIVER_ATHEROS */ +#ifdef CONFIG_DRIVER_NONE +extern const struct wpa_driver_ops wpa_driver_none_ops; /* driver_none.c */ +#endif /* CONFIG_DRIVER_NONE */ + #endif /* DRIVER_H */