X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=src%2Fp2p%2Fp2p.h;h=5b5a0bf047f2d7210f55c36995559edb4798d110;hb=a6f5b1937ad45ced659d87b1eb5a665c8d137d34;hp=5938aa71505986b6e3944490a0ae6a5e6e751eba;hpb=1b928f96b64138fbd4c681bb863aeb71c809c520;p=mech_eap.git diff --git a/src/p2p/p2p.h b/src/p2p/p2p.h index 5938aa7..5b5a0bf 100644 --- a/src/p2p/p2p.h +++ b/src/p2p/p2p.h @@ -9,12 +9,29 @@ #ifndef P2P_H #define P2P_H -#include "wps/wps_defs.h" +#include "common/ieee802_11_defs.h" +#include "wps/wps.h" + +/* P2P ASP Setup Capability */ +#define P2PS_SETUP_NONE 0 +#define P2PS_SETUP_NEW BIT(0) +#define P2PS_SETUP_CLIENT BIT(1) +#define P2PS_SETUP_GROUP_OWNER BIT(2) + +#define P2PS_WILD_HASH_STR "org.wi-fi.wfds" +#define P2PS_HASH_LEN 6 +#define P2P_MAX_QUERY_HASH 6 +#define P2PS_FEATURE_CAPAB_CPT_MAX 2 + +/** + * P2P_MAX_PREF_CHANNELS - Maximum number of preferred channels + */ +#define P2P_MAX_PREF_CHANNELS 100 /** * P2P_MAX_REG_CLASSES - Maximum number of regulatory classes */ -#define P2P_MAX_REG_CLASSES 10 +#define P2P_MAX_REG_CLASSES 15 /** * P2P_MAX_REG_CLASS_CHANNELS - Maximum number of channels per regulatory class @@ -52,7 +69,8 @@ struct p2p_channels { }; enum p2p_wps_method { - WPS_NOT_READY, WPS_PIN_DISPLAY, WPS_PIN_KEYPAD, WPS_PBC, WPS_NFC + WPS_NOT_READY, WPS_PIN_DISPLAY, WPS_PIN_KEYPAD, WPS_PBC, WPS_NFC, + WPS_P2PS }; /** @@ -81,10 +99,14 @@ struct p2p_go_neg_results { int vht; + u8 max_oper_chwidth; + + unsigned int vht_center_freq2; + /** * ssid - SSID of the group */ - u8 ssid[32]; + u8 ssid[SSID_MAX_LEN]; /** * ssid_len - Length of SSID in octets @@ -142,11 +164,148 @@ struct p2p_go_neg_results { unsigned int peer_config_timeout; }; +struct p2ps_provision { + /** + * pd_seeker - P2PS provision discovery seeker role + */ + unsigned int pd_seeker:1; + + /** + * status - Remote returned provisioning status code + */ + int status; + + /** + * adv_id - P2PS Advertisement ID + */ + u32 adv_id; + + /** + * session_id - P2PS Session ID + */ + u32 session_id; + + /** + * method - WPS Method (to be) used to establish session + */ + u16 method; + + /** + * conncap - Connection Capabilities negotiated between P2P peers + */ + u8 conncap; + + /** + * role - Info about the roles to be used for this connection + */ + u8 role; + + /** + * session_mac - MAC address of the peer that started the session + */ + u8 session_mac[ETH_ALEN]; + + /** + * adv_mac - MAC address of the peer advertised the service + */ + u8 adv_mac[ETH_ALEN]; + + /** + * cpt_mask - Supported Coordination Protocol Transport mask + * + * A bitwise mask of supported ASP Coordination Protocol Transports. + * This property is set together and corresponds with cpt_priority. + */ + u8 cpt_mask; + + /** + * cpt_priority - Coordination Protocol Transport priority list + * + * Priorities of supported ASP Coordination Protocol Transports. + * This property is set together and corresponds with cpt_mask. + * The CPT priority list is 0 terminated. + */ + u8 cpt_priority[P2PS_FEATURE_CAPAB_CPT_MAX + 1]; + + /** + * force_freq - The only allowed channel frequency in MHz or 0. + */ + unsigned int force_freq; + + /** + * pref_freq - Preferred operating frequency in MHz or 0. + */ + unsigned int pref_freq; + + /** + * info - Vendor defined extra Provisioning information + */ + char info[0]; +}; + +struct p2ps_advertisement { + struct p2ps_advertisement *next; + + /** + * svc_info - Pointer to (internal) Service defined information + */ + char *svc_info; + + /** + * id - P2PS Advertisement ID + */ + u32 id; + + /** + * config_methods - WPS Methods which are allowed for this service + */ + u16 config_methods; + + /** + * state - Current state of the service: 0 - Out Of Service, 1-255 Vendor defined + */ + u8 state; + + /** + * auto_accept - Automatically Accept provisioning request if possible. + */ + u8 auto_accept; + + /** + * hash - 6 octet Service Name has to match against incoming Probe Requests + */ + u8 hash[P2PS_HASH_LEN]; + + /** + * cpt_mask - supported Coordination Protocol Transport mask + * + * A bitwise mask of supported ASP Coordination Protocol Transports. + * This property is set together and corresponds with cpt_priority. + */ + u8 cpt_mask; + + /** + * cpt_priority - Coordination Protocol Transport priority list + * + * Priorities of supported ASP Coordinatin Protocol Transports. + * This property is set together and corresponds with cpt_mask. + * The CPT priority list is 0 terminated. + */ + u8 cpt_priority[P2PS_FEATURE_CAPAB_CPT_MAX + 1]; + + /** + * svc_name - NULL Terminated UTF-8 Service Name, and svc_info storage + */ + char svc_name[0]; +}; + + struct p2p_data; enum p2p_scan_type { P2P_SCAN_SOCIAL, P2P_SCAN_FULL, + P2P_SCAN_SPECIFIC, P2P_SCAN_SOCIAL_PLUS_ONE }; @@ -169,27 +328,27 @@ struct p2p_peer_info { /** * device_name - Device Name (0..32 octets encoded in UTF-8) */ - char device_name[33]; + char device_name[WPS_DEV_NAME_MAX_LEN + 1]; /** * manufacturer - Manufacturer (0..64 octets encoded in UTF-8) */ - char manufacturer[65]; + char manufacturer[WPS_MANUFACTURER_MAX_LEN + 1]; /** * model_name - Model Name (0..32 octets encoded in UTF-8) */ - char model_name[33]; + char model_name[WPS_MODEL_NAME_MAX_LEN + 1]; /** * model_number - Model Number (0..32 octets encoded in UTF-8) */ - char model_number[33]; + char model_number[WPS_MODEL_NUMBER_MAX_LEN + 1]; /** * serial_number - Serial Number (0..32 octets encoded in UTF-8) */ - char serial_number[33]; + char serial_number[WPS_SERIAL_NUMBER_MAX_LEN + 1]; /** * level - Signal level @@ -217,7 +376,7 @@ struct p2p_peer_info { * This list includes from 0 to 16 Secondary Device Types as indicated * by wps_sec_dev_type_list_len (8 * number of types). */ - u8 wps_sec_dev_type_list[128]; + u8 wps_sec_dev_type_list[WPS_SEC_DEV_TYPE_MAX_LEN]; /** * wps_sec_dev_type_list_len - Length of secondary device type list @@ -230,6 +389,19 @@ struct p2p_peer_info { * wfd_subelems - Wi-Fi Display subelements from WFD IE(s) */ struct wpabuf *wfd_subelems; + + /** + * vendor_elems - Unrecognized vendor elements + * + * This buffer includes any other vendor element than P2P, WPS, and WFD + * IE(s) from the frame that was used to discover the peer. + */ + struct wpabuf *vendor_elems; + + /** + * p2ps_instance - P2PS Application Service Info + */ + struct wpabuf *p2ps_instance; }; enum p2p_prov_disc_status { @@ -237,6 +409,7 @@ enum p2p_prov_disc_status { P2P_PROV_DISC_TIMEOUT, P2P_PROV_DISC_REJECTED, P2P_PROV_DISC_TIMEOUT_JOIN, + P2P_PROV_DISC_INFO_UNAVAILABLE, }; struct p2p_channel { @@ -382,7 +555,7 @@ struct p2p_config { * This data will be added to the end of the SSID after the * DIRECT- prefix. */ - u8 ssid_postfix[32 - 9]; + u8 ssid_postfix[SSID_MAX_LEN - 9]; /** * ssid_postfix_len - Length of the ssid_postfix data @@ -433,7 +606,8 @@ struct p2p_config { * operation to be completed. Type type argument specifies which type * of scan is to be done. @P2P_SCAN_SOCIAL indicates that only the * social channels (1, 6, 11) should be scanned. @P2P_SCAN_FULL - * indicates that all channels are to be scanned. + * indicates that all channels are to be scanned. @P2P_SCAN_SPECIFIC + * request a scan of a single channel specified by freq. * @P2P_SCAN_SOCIAL_PLUS_ONE request scan of all the social channels * plus one extra channel specified by freq. * @@ -455,12 +629,14 @@ struct p2p_config { * send_probe_resp - Transmit a Probe Response frame * @ctx: Callback context from cb_ctx * @buf: Probe Response frame (including the header and body) + * @freq: Forced frequency (in MHz) to use or 0. * Returns: 0 on success, -1 on failure * * This function is used to reply to Probe Request frames that were * indicated with a call to p2p_probe_req_rx(). The response is to be - * sent on the same channel or to be dropped if the driver is not - * anymore listening to Probe Request frames. + * sent on the same channel, unless otherwise specified, or to be + * dropped if the driver is not listening to Probe Request frames + * anymore. * * Alternatively, the responsibility for building the Probe Response * frames in Listen state may be in another system component in which @@ -471,7 +647,8 @@ struct p2p_config { * Request frames must be indicated by calling p2p_probe_req_rx() even * if this send_probe_resp() is not used. */ - int (*send_probe_resp)(void *ctx, const struct wpabuf *buf); + int (*send_probe_resp)(void *ctx, const struct wpabuf *buf, + unsigned int freq); /** * send_action - Transmit an Action frame @@ -590,6 +767,7 @@ struct p2p_config { * @ctx: Callback context from cb_ctx * @src: Source address of the message triggering this notification * @dev_passwd_id: WPS Device Password ID + * @go_intent: Peer's GO Intent * * This callback is used to notify that a P2P Device is requesting * group owner negotiation with us, but we do not have all the @@ -598,7 +776,8 @@ struct p2p_config { * PIN or PBC button press. This information can be provided with a * call to p2p_connect(). */ - void (*go_neg_req_rx)(void *ctx, const u8 *src, u16 dev_passwd_id); + void (*go_neg_req_rx)(void *ctx, const u8 *src, u16 dev_passwd_id, + u8 go_intent); /** * go_neg_completed - Notification of GO Negotiation results @@ -697,6 +876,9 @@ struct p2p_config { * @ctx: Callback context from cb_ctx * @peer: Source address of the response * @status: Cause of failure, will not be %P2P_PROV_DISC_SUCCESS + * @adv_id: If non-zero, then the adv_id of the PD Request + * @adv_mac: P2P Device Address of the advertizer + * @deferred_session_resp: Deferred session response sent by advertizer * * This callback is used to indicate either a failure or no response * to an earlier provision discovery request. @@ -705,7 +887,9 @@ struct p2p_config { * is not used or failures do not need to be indicated. */ void (*prov_disc_fail)(void *ctx, const u8 *peer, - enum p2p_prov_disc_status status); + enum p2p_prov_disc_status status, + u32 adv_id, const u8 *adv_mac, + const char *deferred_session_resp); /** * invitation_process - Optional callback for processing Invitations @@ -827,6 +1011,112 @@ struct p2p_config { * or 0 if not. */ int (*is_p2p_in_progress)(void *ctx); + + /** + * Determine if we have a persistent group we share with remote peer + * and allocate interface for this group if needed + * @ctx: Callback context from cb_ctx + * @addr: Peer device address to search for + * @ssid: Persistent group SSID or %NULL if any + * @ssid_len: Length of @ssid + * @go_dev_addr: Buffer for returning GO P2P Device Address + * @ret_ssid: Buffer for returning group SSID + * @ret_ssid_len: Buffer for returning length of @ssid + * @intended_iface_addr: Buffer for returning intended iface address + * Returns: 1 if a matching persistent group was found, 0 otherwise + */ + int (*get_persistent_group)(void *ctx, const u8 *addr, const u8 *ssid, + size_t ssid_len, u8 *go_dev_addr, + u8 *ret_ssid, size_t *ret_ssid_len, + u8 *intended_iface_addr); + + /** + * Get information about a possible local GO role + * @ctx: Callback context from cb_ctx + * @intended_addr: Buffer for returning intended GO interface address + * @ssid: Buffer for returning group SSID + * @ssid_len: Buffer for returning length of @ssid + * @group_iface: Buffer for returning whether a separate group interface + * would be used + * @freq: Variable for returning the current operating frequency of a + * currently running P2P GO. + * Returns: 1 if GO info found, 0 otherwise + * + * This is used to compose New Group settings (SSID, and intended + * address) during P2PS provisioning if results of provisioning *might* + * result in our being an autonomous GO. + */ + int (*get_go_info)(void *ctx, u8 *intended_addr, + u8 *ssid, size_t *ssid_len, int *group_iface, + unsigned int *freq); + + /** + * remove_stale_groups - Remove stale P2PS groups + * + * Because P2PS stages *potential* GOs, and remote devices can remove + * credentials unilaterally, we need to make sure we don't let stale + * unusable groups build up. + */ + int (*remove_stale_groups)(void *ctx, const u8 *peer, const u8 *go, + const u8 *ssid, size_t ssid_len); + + /** + * p2ps_prov_complete - P2PS provisioning complete + * + * When P2PS provisioning completes (successfully or not) we must + * transmit all of the results to the upper layers. + */ + void (*p2ps_prov_complete)(void *ctx, u8 status, const u8 *dev, + const u8 *adv_mac, const u8 *ses_mac, + const u8 *grp_mac, u32 adv_id, u32 ses_id, + u8 conncap, int passwd_id, + const u8 *persist_ssid, + size_t persist_ssid_size, int response_done, + int prov_start, const char *session_info, + const u8 *feat_cap, size_t feat_cap_len, + unsigned int freq, const u8 *group_ssid, + size_t group_ssid_len); + + /** + * prov_disc_resp_cb - Callback for indicating completion of PD Response + * @ctx: Callback context from cb_ctx + * Returns: 1 if operation was started, 0 otherwise + * + * This callback can be used to perform any pending actions after + * provisioning. It is mainly used for P2PS pending group creation. + */ + int (*prov_disc_resp_cb)(void *ctx); + + /** + * p2ps_group_capability - Determine group capability + * @ctx: Callback context from cb_ctx + * @incoming: Peer requested roles, expressed with P2PS_SETUP_* bitmap. + * @role: Local roles, expressed with P2PS_SETUP_* bitmap. + * @force_freq: Variable for returning forced frequency for the group. + * @pref_freq: Variable for returning preferred frequency for the group. + * Returns: P2PS_SETUP_* bitmap of group capability result. + * + * This function can be used to determine group capability and + * frequencies based on information from P2PS PD exchange and the + * current state of ongoing groups and driver capabilities. + */ + u8 (*p2ps_group_capability)(void *ctx, u8 incoming, u8 role, + unsigned int *force_freq, + unsigned int *pref_freq); + + /** + * get_pref_freq_list - Get preferred frequency list for an interface + * @ctx: Callback context from cb_ctx + * @go: Whether the use if for GO role + * @len: Length of freq_list in entries (both IN and OUT) + * @freq_list: Buffer for returning the preferred frequencies (MHz) + * Returns: 0 on success, -1 on failure + * + * This function can be used to query the preferred frequency list from + * the driver specific to a particular interface type. + */ + int (*get_pref_freq_list)(void *ctx, int go, + unsigned int *len, unsigned int *freq_list); }; @@ -933,12 +1223,26 @@ enum p2p_discovery_type { * requested device types. * @dev_id: Device ID to search for or %NULL to find all devices * @search_delay: Extra delay in milliseconds between search iterations + * @seek_count: Number of ASP Service Strings in the seek_string array + * @seek_string: ASP Service Strings to query for in Probe Requests + * @freq: Requested first scan frequency (in MHz) to modify type == + * P2P_FIND_START_WITH_FULL behavior. 0 = Use normal full scan. + * If p2p_find is already in progress, this parameter is ignored and full + * scan will be executed. * Returns: 0 on success, -1 on failure */ int p2p_find(struct p2p_data *p2p, unsigned int timeout, enum p2p_discovery_type type, unsigned int num_req_dev_types, const u8 *req_dev_types, - const u8 *dev_id, unsigned int search_delay); + const u8 *dev_id, unsigned int search_delay, + u8 seek_count, const char **seek_string, int freq); + +/** + * p2p_notify_scan_trigger_status - Indicate scan trigger status + * @p2p: P2P module context from p2p_init() + * @status: 0 on success, -1 on failure + */ +void p2p_notify_scan_trigger_status(struct p2p_data *p2p, int status); /** * p2p_stop_find - Stop P2P Find (Device Discovery) @@ -1043,6 +1347,7 @@ int p2p_reject(struct p2p_data *p2p, const u8 *peer_addr); * p2p_prov_disc_req - Send Provision Discovery Request * @p2p: P2P module context from p2p_init() * @peer_addr: MAC address of the peer P2P client + * @p2ps_prov: Provisioning info for P2PS * @config_methods: WPS Config Methods value (only one bit set) * @join: Whether this is used by a client joining an active group * @force_freq: Forced TX frequency for the frame (mainly for the join case) @@ -1058,7 +1363,8 @@ int p2p_reject(struct p2p_data *p2p, const u8 *peer_addr); * indicated with the p2p_config::prov_disc_resp() callback. */ int p2p_prov_disc_req(struct p2p_data *p2p, const u8 *peer_addr, - u16 config_methods, int join, int force_freq, + struct p2ps_provision *p2ps_prov, u16 config_methods, + int join, int force_freq, int user_initiated_pd); /** @@ -1248,11 +1554,14 @@ enum p2p_probe_req_status { * @bssid: BSSID if available or %NULL * @ie: Information elements from the Probe Request frame body * @ie_len: Length of ie buffer in octets + * @rx_freq: Probe Request frame RX frequency + * @p2p_lo_started: Whether P2P Listen Offload is started * Returns: value indicating the type and status of the probe request */ enum p2p_probe_req_status p2p_probe_req_rx(struct p2p_data *p2p, const u8 *addr, const u8 *dst, - const u8 *bssid, const u8 *ie, size_t ie_len); + const u8 *bssid, const u8 *ie, size_t ie_len, + unsigned int rx_freq, int p2p_lo_started); /** * p2p_rx_action - Report received Action frame @@ -1395,7 +1704,7 @@ struct p2p_group_config { /** * ssid - Group SSID */ - u8 ssid[32]; + u8 ssid[SSID_MAX_LEN]; /** * ssid_len - Length of SSID @@ -1408,6 +1717,12 @@ struct p2p_group_config { int freq; /** + * ip_addr_alloc - Whether IP address allocation within 4-way handshake + * is supported + */ + int ip_addr_alloc; + + /** * cb_ctx - Context to use with callback functions */ void *cb_ctx; @@ -1594,8 +1909,10 @@ int p2p_assoc_req_ie(struct p2p_data *p2p, const u8 *bssid, u8 *buf, * @p2p: P2P module context from p2p_init() * @ies: Buffer for writing P2P IE * @dev_id: Device ID to search for or %NULL for any + * @bands: Frequency bands used in the scan (enum wpa_radio_work_band bitmap) */ -void p2p_scan_ie(struct p2p_data *p2p, struct wpabuf *ies, const u8 *dev_id); +void p2p_scan_ie(struct p2p_data *p2p, struct wpabuf *ies, const u8 *dev_id, + unsigned int bands); /** * p2p_scan_ie_buf_len - Get maximum buffer length needed for p2p_scan_ie @@ -1683,6 +2000,20 @@ void p2p_set_client_discoverability(struct p2p_data *p2p, int enabled); */ void p2p_set_managed_oper(struct p2p_data *p2p, int enabled); +/** + * p2p_config_get_random_social - Return a random social channel + * @p2p: P2P config + * @op_class: Selected operating class + * @op_channel: Selected social channel + * Returns: 0 on success, -1 on failure + * + * This function is used before p2p_init is called. A random social channel + * from supports bands 2.4 GHz (channels 1,6,11) and 60 GHz (channel 2) is + * returned on success. + */ +int p2p_config_get_random_social(struct p2p_config *p2p, u8 *op_class, + u8 *op_channel); + int p2p_set_listen_channel(struct p2p_data *p2p, u8 reg_class, u8 channel, u8 forced); @@ -1716,6 +2047,9 @@ void p2p_set_intra_bss_dist(struct p2p_data *p2p, int enabled); int p2p_channels_includes_freq(const struct p2p_channels *channels, unsigned int freq); +int p2p_channels_to_freqs(const struct p2p_channels *channels, + int *freq_list, unsigned int max_len); + /** * p2p_supported_freq - Check whether channel is supported for P2P * @p2p: P2P module context from p2p_init() @@ -1784,15 +2118,32 @@ const u8 * p2p_get_go_neg_peer(struct p2p_data *p2p); unsigned int p2p_get_group_num_members(struct p2p_group *group); /** + * p2p_client_limit_reached - Check if client limit is reached + * @group: P2P group context from p2p_group_init() + * Returns: 1 if no of clients limit reached + */ +int p2p_client_limit_reached(struct p2p_group *group); + +/** * p2p_iterate_group_members - Iterate group members * @group: P2P group context from p2p_group_init() * @next: iteration pointer, must be a pointer to a void * that is set to %NULL * on the first call and not modified later - * Returns: A P2P Interface Address for each call and %NULL for no more members + * Returns: A P2P Device Address for each call and %NULL for no more members */ const u8 * p2p_iterate_group_members(struct p2p_group *group, void **next); /** + * p2p_group_get_client_interface_addr - Get P2P Interface Address of a client in a group + * @group: P2P group context from p2p_group_init() + * @dev_addr: P2P Device Address of the client + * Returns: P2P Interface Address of the client if found or %NULL if no match + * found + */ +const u8 * p2p_group_get_client_interface_addr(struct p2p_group *group, + const u8 *dev_addr); + +/** * p2p_group_get_dev_addr - Get a P2P Device Address of a client in a group * @group: P2P group context from p2p_group_init() * @addr: P2P Interface Address of the client @@ -1810,6 +2161,26 @@ const u8 * p2p_group_get_dev_addr(struct p2p_group *group, const u8 *addr); int p2p_group_is_client_connected(struct p2p_group *group, const u8 *dev_addr); /** + * p2p_group_get_config - Get the group configuration + * @group: P2P group context from p2p_group_init() + * Returns: The group configuration pointer + */ +const struct p2p_group_config * p2p_group_get_config(struct p2p_group *group); + +/** + * p2p_loop_on_all_groups - Run the given callback on all groups + * @p2p: P2P module context from p2p_init() + * @group_callback: The callback function pointer + * @user_data: Some user data pointer which can be %NULL + * + * The group_callback function can stop the iteration by returning 0. + */ +void p2p_loop_on_all_groups(struct p2p_data *p2p, + int (*group_callback)(struct p2p_group *group, + void *user_data), + void *user_data); + +/** * p2p_get_peer_found - Get P2P peer info structure of a found peer * @p2p: P2P module context from p2p_init() * @addr: P2P Device Address of the peer or %NULL to indicate the first peer @@ -1870,7 +2241,8 @@ int p2p_set_no_go_freq(struct p2p_data *p2p, /** * p2p_in_progress - Check whether a P2P operation is progress * @p2p: P2P module context from p2p_init() - * Returns: 0 if P2P module is idle or 1 if an operation is in progress + * Returns: 0 if P2P module is idle, 1 if an operation is in progress but not + * in search state, or 2 if search state operation is in progress */ int p2p_in_progress(struct p2p_data *p2p); @@ -1957,7 +2329,7 @@ struct p2p_nfc_params { size_t oob_dev_pw_len; int go_freq; u8 go_dev_addr[ETH_ALEN]; - u8 go_ssid[32]; + u8 go_ssid[SSID_MAX_LEN]; size_t go_ssid_len; }; @@ -1970,4 +2342,49 @@ void p2p_set_authorized_oob_dev_pw_id(struct p2p_data *p2p, u16 dev_pw_id, int p2p_set_passphrase_len(struct p2p_data *p2p, unsigned int len); +void p2p_loop_on_known_peers(struct p2p_data *p2p, + void (*peer_callback)(struct p2p_peer_info *peer, + void *user_data), + void *user_data); + +void p2p_set_vendor_elems(struct p2p_data *p2p, struct wpabuf **vendor_elem); + +void p2p_set_intended_addr(struct p2p_data *p2p, const u8 *intended_addr); + +struct p2ps_advertisement * +p2p_service_p2ps_id(struct p2p_data *p2p, u32 adv_id); +int p2p_service_add_asp(struct p2p_data *p2p, int auto_accept, u32 adv_id, + const char *adv_str, u8 svc_state, + u16 config_methods, const char *svc_info, + const u8 *cpt_priority); +int p2p_service_del_asp(struct p2p_data *p2p, u32 adv_id); +void p2p_service_flush_asp(struct p2p_data *p2p); +struct p2ps_advertisement * p2p_get_p2ps_adv_list(struct p2p_data *p2p); + +/** + * p2p_expire_peers - Periodic cleanup function to expire peers + * @p2p: P2P module context from p2p_init() + * + * This is a cleanup function that the entity calling p2p_init() is + * expected to call periodically to clean up expired peer entries. + */ +void p2p_expire_peers(struct p2p_data *p2p); + +void p2p_set_own_pref_freq_list(struct p2p_data *p2p, + const unsigned int *pref_freq_list, + unsigned int size); + +/** + * p2p_group_get_common_freqs - Get the group common frequencies + * @group: P2P group context from p2p_group_init() + * @common_freqs: On return will hold the group common frequencies + * @num: On return will hold the number of group common frequencies + * Returns: 0 on success, -1 otherwise + */ +int p2p_group_get_common_freqs(struct p2p_group *group, int *common_freqs, + unsigned int *num); + +struct wpabuf * p2p_build_probe_resp_template(struct p2p_data *p2p, + unsigned int freq); + #endif /* P2P_H */