X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=wpa_supplicant%2FREADME-WPS;h=b884f67a2435bbd838a88598821503d87b1f2e9e;hb=d1723c5566d0b582cf4309e725e22970fa1ce0a1;hp=7891fef61161d6ac061b3ec0fa4701235ee55ee2;hpb=59307b3007339024871dbddff4439cbcc7f9aec8;p=mech_eap.git

diff --git a/wpa_supplicant/README-WPS b/wpa_supplicant/README-WPS
index 7891fef..b884f67 100644
--- a/wpa_supplicant/README-WPS
+++ b/wpa_supplicant/README-WPS
@@ -60,7 +60,6 @@ driver interface:
 
 CONFIG_DRIVER_NL80211=y
 CONFIG_WPS=y
-CONFIG_WPS2=y
 
 If you want to enable WPS external registrar (ER) functionality, you
 will also need to add following line:
@@ -277,10 +276,10 @@ wps_er_config <UUID|BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
 <encr> must be one of the following: NONE WEP TKIP CCMP
 
 
-wps_er_pbc <Enrollee UUID>
+wps_er_pbc <Enrollee UUID|MAC address>
 - accept an Enrollee PBC using External Registrar
 
-wps_er_pin <Enrollee UUID> <PIN> [Enrollee MAC address]
+wps_er_pin <Enrollee UUID|"any"|MAC address> <PIN> [Enrollee MAC address]
 - add an Enrollee PIN to External Registrar
 - if Enrollee UUID is not known, "any" can be used to add a wildcard PIN
 - if the MAC address of the enrollee is known, it should be configured
@@ -346,6 +345,10 @@ tag with an external program. Once written, the NFC configuration token
 can be used to touch an NFC interface on a station to provision the
 credentials needed to access the network.
 
+The "wps_nfc_config_token <WPS/NDEF> <network id>" command can be used
+to build an NFC configuration token based on a locally configured
+network.
+
 If the station includes NFC interface and reads an NFC tag with a MIME
 media type "application/vnd.wfa.wsc", the NDEF message payload (with or
 without NDEF encapsulation) can be delivered to wpa_supplicant using the
@@ -362,29 +365,21 @@ the ER functionality has been started (wps_er_start), the NFC password
 token is used to enable enrollment of a new station (that was the source
 of the NFC password token).
 
-"nfc_get_handover_req <NDEF> <WPS>" command can be used to build the
-contents of a Handover Request Message for connection handover. The
-first argument selects the format of the output data and the second
-argument selects which type of connection handover is requested (WPS =
-Wi-Fi handover as specified in WSC 2.0).
-
-"nfc_get_handover_sel <NDEF> <WPS>" command can be used to build the
-contents of a Handover Select Message for connection handover when this
-does not depend on the contents of the Handover Request Message. The
-first argument selects the format of the output data and the second
-argument selects which type of connection handover is requested (WPS =
-Wi-Fi handover as specified in WSC 2.0).
-
-"nfc_rx_handover_req <hexdump of payload>" is used to indicate receipt
-of NFC connection handover request. The payload may include multiple
-carriers the the applicable ones are matched based on the media
-type. The reply data is contents for the Handover Select Message
-(hexdump).
-
-"nfc_rx_handover_sel <hexdump of payload>" is used to indicate receipt
-of NFC connection handover select. The payload may include multiple
-carriers the the applicable ones are matched based on the media
-type.
+"nfc_get_handover_req <NDEF> <WPS-CR>" command can be used to build the
+WPS carrier record for a Handover Request Message for connection
+handover. The first argument selects the format of the output data and
+the second argument selects which type of connection handover is
+requested (WPS-CR = Wi-Fi handover as specified in WSC 2.0).
+
+"nfc_get_handover_sel <NDEF> <WPS> [UUID|BSSID]" command can be used to
+build the contents of a Handover Select Message for connection handover
+when this does not depend on the contents of the Handover Request
+Message. The first argument selects the format of the output data and
+the second argument selects which type of connection handover is
+requested (WPS = Wi-Fi handover as specified in WSC 2.0). If the options
+UUID|BSSID argument is included, this is a request to build the handover
+message for the specified AP when wpa_supplicant is operating as a WPS
+ER.
 
 "nfc_report_handover <INIT/RESP> WPS <carrier from handover request>
 <carrier from handover select>" can be used as an alternative way for
@@ -392,3 +387,13 @@ reporting completed NFC connection handover. The first parameter
 indicates whether the local device initiated or responded to the
 connection handover and the carrier records are the selected carrier
 from the handover request and select messages as a hexdump.
+
+The "wps_er_nfc_config_token <WPS/NDEF> <UUID|BSSID>" command can be
+used to build an NFC configuration token for the specified AP when
+wpa_supplicant is operating as a WPS ER. The output value from this
+command is a hexdump of the selected AP configuration (WPS parameter
+requests this to include only the WPS attributes; NDEF parameter
+requests additional NDEF encapsulation to be included). This data needs
+to be written to an NFC tag with an external program. Once written, the
+NFC configuration token can be used to touch an NFC interface on a
+station to provision the credentials needed to access the network.