X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=wpa_supplicant%2Fconfig_ssid.h;h=010b594af85e84504dc0faec1e505f2eee15b4aa;hb=8f4791749302bb3a89b2baef19fc5e6075ec3845;hp=d515030f3168da7463dac865b8f0b80f6e599899;hpb=4e1eae1dff54295d5d8036f8aeb4d84fbd38f7fa;p=mech_eap.git diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h index d515030..010b594 100644 --- a/wpa_supplicant/config_ssid.h +++ b/wpa_supplicant/config_ssid.h @@ -13,8 +13,6 @@ #include "utils/list.h" #include "eap_peer/eap_config.h" -#define MAX_SSID_LEN 32 - #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1) #define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \ @@ -22,17 +20,22 @@ #define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN) #define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X) #define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) -#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP | \ - WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40) +#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP) #define DEFAULT_FRAGMENT_SIZE 1398 #define DEFAULT_BG_SCAN_PERIOD -1 +#define DEFAULT_MESH_MAX_RETRIES 2 +#define DEFAULT_MESH_RETRY_TIMEOUT 40 +#define DEFAULT_MESH_CONFIRM_TIMEOUT 40 +#define DEFAULT_MESH_HOLDING_TIMEOUT 40 #define DEFAULT_DISABLE_HT 0 #define DEFAULT_DISABLE_HT40 0 #define DEFAULT_DISABLE_SGI 0 +#define DEFAULT_DISABLE_LDPC 0 #define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */ #define DEFAULT_AMPDU_FACTOR -1 /* no change */ #define DEFAULT_AMPDU_DENSITY -1 /* no change */ +#define DEFAULT_USER_SELECTED_SIM 1 struct psk_list_entry { struct dl_list list; @@ -126,6 +129,18 @@ struct wpa_ssid { u8 bssid[ETH_ALEN]; /** + * bssid_blacklist - List of inacceptable BSSIDs + */ + u8 *bssid_blacklist; + size_t num_bssid_blacklist; + + /** + * bssid_blacklist - List of acceptable BSSIDs + */ + u8 *bssid_whitelist; + size_t num_bssid_whitelist; + + /** * bssid_set - Whether BSSID is configured for this network */ int bssid_set; @@ -163,6 +178,14 @@ struct wpa_ssid { char *ext_psk; /** + * mem_only_psk - Whether to keep PSK/passphrase only in memory + * + * 0 = allow psk/passphrase to be stored to the configuration file + * 1 = do not store psk/passphrase to the configuration file + */ + int mem_only_psk; + + /** * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_* */ int pairwise_cipher; @@ -202,7 +225,9 @@ struct wpa_ssid { * * scan_ssid can be used to scan for APs using hidden SSIDs. * Note: Many drivers do not support this. ap_mode=2 can be used with - * such drivers to use hidden SSIDs. + * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers + * do support scan_ssid=1 and that should be used with them instead of + * ap_scan=2. */ int scan_ssid; @@ -315,6 +340,8 @@ struct wpa_ssid { * 4 = P2P Group Formation (used internally; not in configuration * files) * + * 5 = Mesh + * * Note: IBSS can only be used with key_mgmt NONE (plaintext and static * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE * (fixed group key TKIP/CCMP) is available for backwards compatibility, @@ -329,9 +356,23 @@ struct wpa_ssid { WPAS_MODE_AP = 2, WPAS_MODE_P2P_GO = 3, WPAS_MODE_P2P_GROUP_FORMATION = 4, + WPAS_MODE_MESH = 5, } mode; /** + * pbss - Whether to use PBSS. Relevant to DMG networks only. + * 0 = do not use PBSS + * 1 = use PBSS + * 2 = don't care (not allowed in AP mode) + * Used together with mode configuration. When mode is AP, it + * means to start a PCP instead of a regular AP. When mode is INFRA it + * means connect to a PCP instead of AP. In this mode you can also + * specify 2 (don't care) meaning connect to either AP or PCP. + * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network. + */ + int pbss; + + /** * disabled - Whether this network is currently disabled * * 0 = this network can be used (default). @@ -398,10 +439,45 @@ struct wpa_ssid { */ int frequency; + /** + * fixed_freq - Use fixed frequency for IBSS + */ + int fixed_freq; + +#ifdef CONFIG_ACS + /** + * ACS - Automatic Channel Selection for AP mode + * + * If present, it will be handled together with frequency. + * frequency will be used to determine hardware mode only, when it is + * used for both hardware mode and channel when used alone. This will + * force the channel to be set to 0, thus enabling ACS. + */ + int acs; +#endif /* CONFIG_ACS */ + + /** + * mesh_basic_rates - BSS Basic rate set for mesh network + * + */ + int *mesh_basic_rates; + + /** + * Mesh network plink parameters + */ + int dot11MeshMaxRetries; + int dot11MeshRetryTimeout; /* msec */ + int dot11MeshConfirmTimeout; /* msec */ + int dot11MeshHoldingTimeout; /* msec */ + int ht40; int vht; + u8 max_oper_chwidth; + + unsigned int vht_center_freq2; + /** * wpa_ptk_rekey - Maximum lifetime for PTK in seconds * @@ -411,6 +487,14 @@ struct wpa_ssid { int wpa_ptk_rekey; /** + * group_rekey - Group rekeying time in seconds + * + * This value, if non-zero, is used as the dot11RSNAConfigGroupRekeyTime + * parameter when operating in Authenticator role in IBSS. + */ + int group_rekey; + + /** * scan_freq - Array of frequencies to scan or %NULL for all * * This is an optional zero-terminated array of frequencies in @@ -525,6 +609,19 @@ struct wpa_ssid { int disable_sgi; /** + * disable_ldpc - Disable LDPC for this network + * + * By default, use it if it is available, but this can be configured + * to 1 to have it disabled. + */ + int disable_ldpc; + + /** + * ht40_intolerant - Indicate 40 MHz intolerant for this network + */ + int ht40_intolerant; + + /** * disable_max_amsdu - Disable MAX A-MSDU * * A-MDSU will be 3839 bytes when disabled, or 7935 @@ -621,6 +718,52 @@ struct wpa_ssid { * dereferences since it may not be updated in all cases. */ void *parent_cred; + +#ifdef CONFIG_MACSEC + /** + * macsec_policy - Determines the policy for MACsec secure session + * + * 0: MACsec not in use (default) + * 1: MACsec enabled - Should secure, accept key server's advice to + * determine whether to use a secure session or not. + */ + int macsec_policy; +#endif /* CONFIG_MACSEC */ + +#ifdef CONFIG_HS20 + int update_identifier; +#endif /* CONFIG_HS20 */ + + unsigned int wps_run; + + /** + * mac_addr - MAC address policy + * + * 0 = use permanent MAC address + * 1 = use random MAC address for each ESS connection + * 2 = like 1, but maintain OUI (with local admin bit set) + * + * Internally, special value -1 is used to indicate that the parameter + * was not specified in the configuration (i.e., default behavior is + * followed). + */ + int mac_addr; + + /** + * no_auto_peer - Do not automatically peer with compatible mesh peers + * + * When unset, the reception of a beacon from a another mesh peer in + * this MBSS will trigger a peering attempt. + */ + int no_auto_peer; + + /** + * wps_disabled - WPS disabled in AP mode + * + * 0 = WPS enabled and configured (default) + * 1 = WPS disabled + */ + int wps_disabled; }; #endif /* CONFIG_SSID_H */