X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=wpa_supplicant%2Fconfig_ssid.h;h=1ecdfc0994db8fa24a226c09f77a7a5911d13e50;hb=9eece21357b6706ca783635b761350e74a8e8992;hp=7ef326cfbed634c8f34024861b13c17e6106b7bc;hpb=8406cd35159f4286c12a629ddfecaa33e587a805;p=mech_eap.git

diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index 7ef326c..1ecdfc0 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -360,6 +360,19 @@ struct wpa_ssid {
 	} mode;
 
 	/**
+	 * pbss - Whether to use PBSS. Relevant to DMG networks only.
+	 * 0 = do not use PBSS
+	 * 1 = use PBSS
+	 * 2 = don't care (not allowed in AP mode)
+	 * Used together with mode configuration. When mode is AP, it
+	 * means to start a PCP instead of a regular AP. When mode is INFRA it
+	 * means connect to a PCP instead of AP. In this mode you can also
+	 * specify 2 (don't care) meaning connect to either AP or PCP.
+	 * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
+	 */
+	int pbss;
+
+	/**
 	 * disabled - Whether this network is currently disabled
 	 *
 	 * 0 = this network can be used (default).
@@ -431,6 +444,18 @@ struct wpa_ssid {
 	 */
 	int fixed_freq;
 
+#ifdef CONFIG_ACS
+	/**
+	 * ACS - Automatic Channel Selection for AP mode
+	 *
+	 * If present, it will be handled together with frequency.
+	 * frequency will be used to determine hardware mode only, when it is
+	 * used for both hardware mode and channel when used alone. This will
+	 * force the channel to be set to 0, thus enabling ACS.
+	 */
+	int acs;
+#endif /* CONFIG_ACS */
+
 	/**
 	 * mesh_basic_rates - BSS Basic rate set for mesh network
 	 *
@@ -449,6 +474,10 @@ struct wpa_ssid {
 
 	int vht;
 
+	u8 max_oper_chwidth;
+
+	unsigned int vht_center_freq2;
+
 	/**
 	 * wpa_ptk_rekey - Maximum lifetime for PTK in seconds
 	 *
@@ -719,6 +748,14 @@ struct wpa_ssid {
 	 * this MBSS will trigger a peering attempt.
 	 */
 	int no_auto_peer;
+
+	/**
+	 * wps_disabled - WPS disabled in AP mode
+	 *
+	 * 0 = WPS enabled and configured (default)
+	 * 1 = WPS disabled
+	 */
+	int wps_disabled;
 };
 
 #endif /* CONFIG_SSID_H */