X-Git-Url: http://www.project-moonshot.org/gitweb/?a=blobdiff_plain;f=wpa_supplicant%2Fconfig_ssid.h;h=1ecdfc0994db8fa24a226c09f77a7a5911d13e50;hb=b84ce655d31a2236734c788fd3292c10d5d9f0b1;hp=b5dbf6ee38c8bc2e0310368ac1cf2907d0c20d78;hpb=c267753ba2cc006907c57cf11b06d658f783682f;p=mech_eap.git

diff --git a/wpa_supplicant/config_ssid.h b/wpa_supplicant/config_ssid.h
index b5dbf6e..1ecdfc0 100644
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -13,8 +13,6 @@
 #include "utils/list.h"
 #include "eap_peer/eap_config.h"
 
-#define MAX_SSID_LEN 32
-
 
 #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
 #define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
@@ -22,11 +20,14 @@
 #define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
 #define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
 #define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
-#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP | \
-		       WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)
+#define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
 #define DEFAULT_FRAGMENT_SIZE 1398
 
 #define DEFAULT_BG_SCAN_PERIOD -1
+#define DEFAULT_MESH_MAX_RETRIES 2
+#define DEFAULT_MESH_RETRY_TIMEOUT 40
+#define DEFAULT_MESH_CONFIRM_TIMEOUT 40
+#define DEFAULT_MESH_HOLDING_TIMEOUT 40
 #define DEFAULT_DISABLE_HT 0
 #define DEFAULT_DISABLE_HT40 0
 #define DEFAULT_DISABLE_SGI 0
@@ -128,6 +129,18 @@ struct wpa_ssid {
 	u8 bssid[ETH_ALEN];
 
 	/**
+	 * bssid_blacklist - List of inacceptable BSSIDs
+	 */
+	u8 *bssid_blacklist;
+	size_t num_bssid_blacklist;
+
+	/**
+	 * bssid_blacklist - List of acceptable BSSIDs
+	 */
+	u8 *bssid_whitelist;
+	size_t num_bssid_whitelist;
+
+	/**
 	 * bssid_set - Whether BSSID is configured for this network
 	 */
 	int bssid_set;
@@ -165,6 +178,14 @@ struct wpa_ssid {
 	char *ext_psk;
 
 	/**
+	 * mem_only_psk - Whether to keep PSK/passphrase only in memory
+	 *
+	 * 0 = allow psk/passphrase to be stored to the configuration file
+	 * 1 = do not store psk/passphrase to the configuration file
+	 */
+	int mem_only_psk;
+
+	/**
 	 * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
 	 */
 	int pairwise_cipher;
@@ -204,7 +225,9 @@ struct wpa_ssid {
 	 *
 	 * scan_ssid can be used to scan for APs using hidden SSIDs.
 	 * Note: Many drivers do not support this. ap_mode=2 can be used with
-	 * such drivers to use hidden SSIDs.
+	 * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers
+	 * do support scan_ssid=1 and that should be used with them instead of
+	 * ap_scan=2.
 	 */
 	int scan_ssid;
 
@@ -317,6 +340,8 @@ struct wpa_ssid {
 	 * 4 = P2P Group Formation (used internally; not in configuration
 	 * files)
 	 *
+	 * 5 = Mesh
+	 *
 	 * Note: IBSS can only be used with key_mgmt NONE (plaintext and static
 	 * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE
 	 * (fixed group key TKIP/CCMP) is available for backwards compatibility,
@@ -331,9 +356,23 @@ struct wpa_ssid {
 		WPAS_MODE_AP = 2,
 		WPAS_MODE_P2P_GO = 3,
 		WPAS_MODE_P2P_GROUP_FORMATION = 4,
+		WPAS_MODE_MESH = 5,
 	} mode;
 
 	/**
+	 * pbss - Whether to use PBSS. Relevant to DMG networks only.
+	 * 0 = do not use PBSS
+	 * 1 = use PBSS
+	 * 2 = don't care (not allowed in AP mode)
+	 * Used together with mode configuration. When mode is AP, it
+	 * means to start a PCP instead of a regular AP. When mode is INFRA it
+	 * means connect to a PCP instead of AP. In this mode you can also
+	 * specify 2 (don't care) meaning connect to either AP or PCP.
+	 * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
+	 */
+	int pbss;
+
+	/**
 	 * disabled - Whether this network is currently disabled
 	 *
 	 * 0 = this network can be used (default).
@@ -400,10 +439,45 @@ struct wpa_ssid {
 	 */
 	int frequency;
 
+	/**
+	 * fixed_freq - Use fixed frequency for IBSS
+	 */
+	int fixed_freq;
+
+#ifdef CONFIG_ACS
+	/**
+	 * ACS - Automatic Channel Selection for AP mode
+	 *
+	 * If present, it will be handled together with frequency.
+	 * frequency will be used to determine hardware mode only, when it is
+	 * used for both hardware mode and channel when used alone. This will
+	 * force the channel to be set to 0, thus enabling ACS.
+	 */
+	int acs;
+#endif /* CONFIG_ACS */
+
+	/**
+	 * mesh_basic_rates - BSS Basic rate set for mesh network
+	 *
+	 */
+	int *mesh_basic_rates;
+
+	/**
+	 * Mesh network plink parameters
+	 */
+	int dot11MeshMaxRetries;
+	int dot11MeshRetryTimeout; /* msec */
+	int dot11MeshConfirmTimeout; /* msec */
+	int dot11MeshHoldingTimeout; /* msec */
+
 	int ht40;
 
 	int vht;
 
+	u8 max_oper_chwidth;
+
+	unsigned int vht_center_freq2;
+
 	/**
 	 * wpa_ptk_rekey - Maximum lifetime for PTK in seconds
 	 *
@@ -659,12 +733,29 @@ struct wpa_ssid {
 	 *
 	 * 0 = use permanent MAC address
 	 * 1 = use random MAC address for each ESS connection
+	 * 2 = like 1, but maintain OUI (with local admin bit set)
 	 *
 	 * Internally, special value -1 is used to indicate that the parameter
 	 * was not specified in the configuration (i.e., default behavior is
 	 * followed).
 	 */
 	int mac_addr;
+
+	/**
+	 * no_auto_peer - Do not automatically peer with compatible mesh peers
+	 *
+	 * When unset, the reception of a beacon from a another mesh peer in
+	 * this MBSS will trigger a peering attempt.
+	 */
+	int no_auto_peer;
+
+	/**
+	 * wps_disabled - WPS disabled in AP mode
+	 *
+	 * 0 = WPS enabled and configured (default)
+	 * 1 = WPS disabled
+	 */
+	int wps_disabled;
 };
 
 #endif /* CONFIG_SSID_H */